Separation of Methylene Blue as Pollutant of Water by SBA-15 in a Fixed-Bed Column

Synthesis and characterization of a novel copper carboxylate complex and a copper complex-coated polyether sulfone membrane for the efficient degradation of methylene blue dye under UV irradiation: single crystal X-ray structure of the copper carboxylate complex

This study presents the synthesis of a novel binuclear Cu(II) carboxylate complex under ambient laboratory conditions. The complex possesses a paddle wheel structure in which the axial positions are occupied by bromide/nitrate ligands. The synthesized complex was characterized using single-crystal X-ray crystallography, FT-IR, X-ray diffraction, and UV-Visible spectroscopic techniques. The thermal stability of the metal complex was studied through thermogravimetric analysis. The synthesized metal complex was employed for the synthesis of metal complex-coated polyether sulfone (PES) membranes, which were characterized before and after filtration using the FESEM technique. The photocatalytic efficiency of the metal complex for the degradation of methylene blue dye under UV irradiation in the presence of H2O2was studied and compared with the photodegradation efficiency of the metal complex-coated polyether sulfone (PES) membrane.

Bionanocomposite MIL-100(Fe)/Cellulose as a high-performance adsorbent for the adsorption of methylene blue

World production of dyes is estimated at more than 800,000 t·yr-1. The purpose of this research falls within the scope of the choice of an effective, local, and inexpensive adsorbent to remove dyes from wastewater. Adsorptive elimination of dyes by commonly accessible adsorbents is inefficient. The metal-organic frameworks (MOFs) are an important class of porous materials offering exceptional properties as adsorbents by improving separation efficiency compared to existing commercial adsorbents. However, its powder form limits its applications. One way to overcome this problem is to trap them in a flexible matrix to form a hierarchical porous composite. Therefore, in this work, we prepared MIL-100 (Fe) embedded in a cellulose matrix named MIL-100(Fe)/Cell, and used it as an adsorbent of methylene blue (MB) dye. According to the BET analysis, the specific surface area of the synthesized MOF is 294 m2/g which is related to the presence of the cellulose as efficient and green support. The structure of this composite is approximately hexagonal. Adsorption was studied as a function of contact time, adsorbent mass and pollutant load (concentration), and pH, and the effect of each of them on absorption efficiency was optimized. The MIL-100(Fe)/Cell was capable of removing 98.94% of MB dye with an initial concentration of 150 mg/L within 10 min at pH = 6.5 and room temperature. The obtained maximum adsorption capacity was 384.615 mg/g. The adsorption isotherm is consistent with the Langmuir models. The mechanism of MB adsorption proceeds through п-п and electrostatic interactions.

Synthesis and characterization of a novel copper carboxylate complex and a copper complex-coated polyether sulfone membrane for efficient degradation of methylene blue dye under UV irradiation: the single crystal X-ray structure of the copper carboxylate complex

Synthesis of a novel binuclear Cu(II) carboxylate complex under ambient laboratory conditions is presented. The complex exhibits a paddle wheel structure in which the axial positions are occupied by two copper atoms instead of two water molecules. The synthesized complex was characterized by single-crystal X-ray crystallography, FT-IR, X-ray diffraction, and UV-visible spectroscopy techniques. The thermal stability of the metal complex was studied by the thermogravimetric analysis study. The synthesized metal complex was employed for the synthesis of metal complex-coated polyether sulfone (PES) membranes which were characterized before and after filtration using the FESEM technique. The photocatalytic efficiency of the metal complex was studied for the degradation of methylene blue dye under UV irradiation in the presence of H2O2 and was compared with the photodegradation efficiency of the metal complex-coated polyether sulfone (PES) membrane.

Valorization of Glucose-Derived Humin as a Low-Cost, Green, Reusable Adsorbent for Dye Removal, and Modeling the Process

Glucose can be isomerized into fructose and dehydrated into key platform biochemicals, following the "bio-refinery concept". However, this process generates black and intractable substances called humin, which possess a polymeric furanic-type structure. In this study, glucose-derived humin (GDH) was obtained by reacting D-glucose with an allylamine catalyst in a deep eutectic solvent medium, followed by a carbonization step. GDH was used as a low-cost, green, and reusable adsorbent for removing cationic methylene blue (MB) dye from water. The morphology of carbonized GDH differs from pristine GDH. The removal efficiencies of MB dye using pristine GDH and carbonized GDH were 52% and 97%, respectively. Temperature measurements indicated an exothermic process following pseudo-first-order kinetics, with adsorption behavior described by the Langmuir isotherm. The optimum parameters were predicted using the response surface methodology and found to be a reaction time of 600 min, an initial dye concentration of 50 ppm, and a GDH weight of 0.11 g with 98.7% desirability. The MB dye removal rate optimized through this model was 96.85%, which was in good agreement with the experimentally obtained value (92.49%). After 10 cycles, the MB removal rate remained above 80%, showcasing the potential for GDH reuse and cost-effective wastewater treatment.

Treatment and Recovery of High-Value Elements from Produced Water

Oil and gas production wells generate large volumes of water mixed with hydrocarbons (dispersed and dissolved), salts (ions), and solids. This ‘produced water’ (PW) is a waste stream that must be disposed of appropriately. The presence of toxic hydrocarbons and ions in PW makes it unsuitable for surface discharge or disposal in groundwater resources. Thus, PW is often injected into deep geological formations as a disposal method. However, the supply of global water sources is diminishing, and the demand for water in industrial, domestic, and agricultural use in water-stressed regions makes PW a potentially attractive resource. PW also contains valuable elements like lithium and rare earth elements, which are increasing in global demand. This review article provides an overview of constituents present in PW, current technologies available to remove and recover valuable elements, and a case study highlighting the costs and economic benefits of recovering these valuable elements. PW contains a promising source of valuable elements. Developing technologies, such as ceramic membranes with selective sorption chemistry could make elemental recovery economically feasible and turn PW from a waste stream into a multi-faceted resource.

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

V2O5 Nanoparticles for Dyes Removal from Water

This paper deals with V2O5 nanoparticles adsorbents which were obtained by thermal pretreatment carried out by increasing the temperature between 90 and 750°C. In order to obtain more detailed information on the surface chemistry of the newly prepared nanoparticles, the characterisation was done by X-ray diffraction and scanning electron microscopy, Fourier Transform infrared spectroscopy and thermogravimetric investigation technique. The prepared nanoparticles were tested for methylene blue (MB) removal from modelled water solutions. The obtained results indicated that increased MB removal efficiency (93%) and adsorption capacity (27 mg/g) after 40 minutes of adsorption were obtained for V2O5 annealed at 500°C. The applicability and suitability of the two kinetic models were tested and the removal mechanism was proposed.

Drug delivery of amoxicillin molecule as a suggested treatment for covid-19 implementing functionalized mesoporous SBA-15 with aminopropyl groups

SARS-CoV-2 is a novel coronavirus that was isolated and identified for the first time in Wuhan, China in 2019. Nowadays, it is a worldwide danger and the WHO named it a pandemic. In this investigation, a functionalization post-synthesis method was used to assess the ability of an adapted SBA-15 surface as a sorbent to load the drug from an aqueous medium. Different characterization approaches were used to determine the characterization of the substance before and after functionalization such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), nitrogen adsorption–desorption porosimetry (Brunauer–Emmett–Teller) BET surface area analysis, and thermal gravimetric analysis (TGA). Batch adsorption testing was carried out in a single adsorption device to find the impact of multiple variables on the drug amoxicillin charge output. The following parameters were studied: 0–72 hr. contact time, 20–120 mg/l initial concentration, and 20–250 mg of NH₂-SBA-15 dose. The outcomes from such experiments revealed the strong influence and behavior of the amino-functional group to increase the drug's load. Drug delivery outcomes studies found that amoxicillin loading was directly related to NH₂-SBA-15 contact time and dose, but indirectly related to primary concentration. It was observed that 80% of amoxicillin was loaded while the best release test results were 1 hour and 51%.

Efficient removal of Hg2+ from aqueous solution by a novel composite of nano humboldtine decorated almandine (NHDA): Ion exchange, reducing-oxidation and adsorption

Efficient removal of Hg²⁺ from aqueous solution is key for environmental protection and human health. Herein, a novel composite of nano humboldtine decorated almandine was synthesized from almandine for the removal of Hg²⁺. Results showed that the Hg²⁺ removal process followed pseudo-second-order kinetic model and Langmuir equation, and the maximum adsorption capacity was 575.17 mg/g. Furthermore, Hg²⁺ removal by the composite was pH-dependent and low pH value facilitated the removal of Hg²⁺. SEM and HADDF-STEM results suggested a new rod morphology was generated and the adsorbed mercury was mainly enriched into this structure after reaction with Hg²⁺ solution. The removal mechanisms of Hg²⁺ by the composite was pH dependent, and included ion exchange, surface complexation, reduction and oxidation. Our results demonstrated that the composite was an ideal material for Hg²⁺ removal and the transformation ways of mercury related species could be a significant but currently underestimated pathway in natural and engineered systems.

Removal of Cr(VI) and methyl orange by activated carbon fiber supported nanoscale zero-valent iron in a continuous fixed bed column

The application of activated carbon fiber supported nanoscale zero-valent iron (ACF-nZVI) in the continuous removal of Cr(VI) and methyl orange (MO) from aqueous solution was studied in depth. The breakthrough curves of Cr(VI) in a fixed bed with ACF-nZVI were measured, and compared with those in the fixed bed with ACF. The catalytic wet peroxide oxidation (CWPO) process for MO was also carried out using ACF-nZVI after reacting with Cr(VI) in the same fixed bed. The results showed that the breakthrough time of ACF-nZVI was significantly longer than that of ACF. Higher pH values were unfavorable for the Cr(VI) removal. The breakthrough time increased with decreasing inlet Cr(VI) concentration or increasing bed height. The Yoon-Nelson and bed depth service time (BDST) models were found to show good agreement with the experimental data. The Cr(VI) removal capacity when using ACF-nZVI was two times higher than that when using ACF. Under the optimal empty bed contact time of 1.256 min, the fixed bed displayed high MO conversion (99.2%) and chemical oxygen demand removal ratio (55.7%) with low Fe leaching concentration (<5 mg/L) after continuous running for 240 min. After three cycles, the conversion of MO remained largely unchanged.

Adsorption of the methyl green dye pollutant from aqueous solution using mesoporous materials MCM-41 in a fixed-bed column

In this study, a Methyl Green (MG) dye pollutant was separated by Mobil Composition Matter No. 41 (MCM-41) in a fixed-bed continuous column with investigated three parameters, namely a bed height (2-6 cm), initial MG concentration (10-30 mgL^-1) and a process flow rate (0.8-1.6 mL min^-1). Results indicated that the highest bed capacity of 20.97 mg/g was obtained with respective to optimal values such as; 6 cm for a column height, 0.8 mL min^-1 for flow rate, and an initial MG concentration 20 mgL^-1. Furthermore, a quantity of the adsorbed pollutant decreased as the flow rate increased, while increasing the initial MG concentration yielded the opposite effect. The column apparatus was performed properly at the low flow rate, whereas both the breakthrough and exhaustion time increased with the bed depth. Thomas and Yoon-Nelson models were applied for predicting the breakthrough curves and calculating the characteristic factors of the laboratory fixed-bed adsorption column, which were beneficial for process design. Based on regression coefficient analyses, results of employing the Yoon-Nelson model was found to be superior to the Thomas one. Breakthrough performance indicated that MCM-41 was suitable for applications in continuous adsorption regimes for MG dye. The mesoporous MCM-41 was recovered effectively by calcinations and employed again for four times in the continuous system successfully.

Evaluation of different adsorbents for acidity reduction in residual oils

This work aims to evaluate the adsorption potential of bentonite and sugarcane bagasse clay for the reduction of free fatty acids in cooking oil through batch technique, experimental planning with different operating conditions (temperature, adsorbent mass and agitation). After were carried out kinetic studies and thermodynamic studies. Thus, both adsorbents were characterized by nitrogen dispersion, scanning electron microscopy with coupled energy dispersion spectroscopy. The sugarcane bagasse provided higher reductions compared to the bentonite clay, 58 and 50%, respectively. In the kinetic studies, it was observed that the pseudo-secunda model for both materials. Among the isotherms studied, the Langmuir model was better adjusted for sugarcane bagasse and Freundlich for bentonite clay. Thermodynamic parameters indicated spontaneous and endothermic adsorption at temperatures of 18°C, 20°C and 25°C. Both materials showed an advantageous result with the reduction to the adsorption of free fatty acids in the residual oil, considering that they are low-cost materials, their pre-treatment is simple from the operational point of view and their physical and chemical characteristics are favorable to the adsorption process, sugarcane bagasse contains about 42% hemicellulose, which is a hydroxyl-rich material that attracts the H⁺ ions from the medium.

Ultrasound-assisted synthesis of YbVO4 nanostructure and YbVO4/CuWO4 nanocomposites for enhanced photocatalytic degradation of organic dyes under visible light

YbVO₄ nanostructure and YbVO₄/CuWO₄ nanocomposites were successfully synthesized using sonochemical method, for the first time. In this disquisition, we tried to compare various parameters and reaction conditions on size, morphology, and uniformity of as-obtained samples. To reach optimum condition, some parameters including time, power, temperature, and solvent were investigated. The structural, morphological, optical, and magnetic properties of as-obtained products were characterized by some techniques such as FT-IR, XRD, EDS, SEM, TEM, UV-Vis, and VSM. Furthermore, due to occurrence of red shift in nonanocomposite, during the coupling of CuWO₄ into YbVO₄, photocatalytic and optical properties of final products were improved which lead to improve photo-destruction efficiency for methylene blue from 65% to 100%, during 120 min irradiation. The effect of the ultrasonic radiation on the photocatalytic behavior of YbVO₄/CuWO₄ shows that methylene blue pollutant destruction was about 100% with ultrasonic wave and 61% in the absence of ultrasonic radiation.

Treatment of model and galvanic waste solutions of copper(II) ions using a lignin/inorganic oxide hybrid as an effective sorbent

A study was made concerning the removal of copper(II) ions from model and galvanic waste solutions using a new sorption material consisting of lignin in combination with an inorganic oxide system. Specific physicochemical properties of the material resulted from combining the activity of the functional groups present in the structure of lignin with the high surface area of the synthesized oxide system (585m²/g). Analysis of the porous structure parameters, particle size and morphology, elemental composition and characteristic functional groups confirmed the effective synthesis of the new type of sorbent. A key element of the study was a series of tests of adsorption of copper(II) ions from model solutions. It was determined how the efficiency of the adsorption process was affected by the process time, mass of sorbent, concentration of adsorbate, pH and temperature. Potential regeneration of adsorbent, which provides the possibility of its reusing and recovering the adsorbed copper, was also analyzed. The sorption capacity of the material was measured (83.98mg/g), and the entire process was described using appropriate kinetic models. The results were applied to the design of a further series of adsorption tests, carried out on solutions of real sewage from a galvanizing plant.