Effects of formulation properties on sol–gel behavior of chitosan/glycerolphosphate hydrogel

Preparation and Properties of Glycerohydrogels Based on Silicon Tetraglycerolate, Chitosan Hydrochloride and Glucomannan

Glycerohydrogels based on silicon glycerolate, chitosan (CS) and polyvinyl alcohol (PVA) are widely studied for use in biomedical applications. In line with the general trend of replacing synthetic polymers with natural ones in such compositions, it would be of interest to replace PVA with the polysaccharide glucomannan (GM), as well as to introduce functional additives to impart the desired properties, including gelation time, to the final hydrogel. In this work, a comprehensive study of the preparation conditions and properties of glycerohydrogels based on silicon tetraglycerolate, chitosan hydrochloride (CS·HCl) and GM was carried out. Viscometry was used to assess the conformational state of CS·HCl and GM macromolecules, and their associates in solution before gelation. Gelation was studied using the vessel inversion method. The mucoadhesive and the dermoadhesive properties of the glycerohydrogels obtained were assessed using the tearing off method from the model substrates simulating mucous and dermal tissues. The conformational state of the individual polymers and their mixed associates in solution before gelation was estimated; the intrinsic viscosity and the hydrodynamic radius of the macromolecular coils were calculated. The influence of various factors (addition of ε-aminocaproic and hydrochloric acids, sodium chloride, hydroxide and tetraborate to vary the acidity and ionic strength of the medium, as well as temperature) and the molecular weight of chitosan on the gelation time was studied. The gelation time achieved was less than 2 min, which is promising in practical terms, i.e., for creating liquid plasters. Our best samples are not inferior to the commercial preparation "Metrogyl Denta"® in terms of tearing force during mucoadhesion and dermoadhesion at short gelation times. Thus, the glycerohydrogels synthesized by us and based on silicon tetraglycerolate, CS·HCl and GM could find usage in new biopharmaceutical and biomedical applications.

Hybrid thermosensitive hydrogel/amniotic membrane structure incorporating S-nitrosothiol microparticles: potential uses for controlled nitric oxide delivery

Insufficient levels of nitric oxide may lead to chronic and acute wounds. Additionally, it is crucial that nitric oxide is prepared in a controlled-release manner due to its gaseous nature and short half-life. To address this issue, utilizing nitric oxide donors, particularly S-nitrosothiols such as S-nitrosoglutathione (GSNO), could efficiently overcome instability and aid in biomedical applications. Decellularized human amniotic membranes are also best known for their anti-inflammatory, angiogenic, and antimicrobial properties to promote wound epithelization. In this study, a novel nitric oxide-generated wound dressing based on an amniotic membrane was investigated. This construct consisted of a chitosan/β-glycerophosphate thermosensitive hydrogel covered with a decellularized human amniotic layer embedded with GSNO-loaded polylactic acid microparticles. The structure of GSNO was confirmed by spectrometric, elemental, and chemical analyses. The GSNO-loaded microparticles had a diameter of 40.66 ± 6.92 µm, and an encapsulation efficiency of 45.6 ± 6.74%. The hybrid construct and GSNO-loaded microparticles enhanced the long-term stable release of GSNO compared to free GSNO. The construct released nitric oxide ranging from 24 to 68 nM/mg during 7 days. The thermosensitive hydrogel was formed at 32.7 ± 1 °C and had a porous structure with a pore size of 41.76 ± 9.76 µm. The MTT and live/dead assays performed on human dermal fibroblast cells demonstrated suitable cell viability and adhesion to the final construct. Further, hemolysis analysis revealed less than a 5% hemolysis rate due to negligible blood cell adhesion. Overall, the prepared hybrid construct demonstrated suitable characteristics as a potential active wound dressing capable of controlled nitric oxide delivery.

Injectable Chitosan-Methoxy Polyethylene Glycol Hybrid Hydrogel Untangling the Wound Healing Behavior: In Vitro and In Vivo Evaluation

Wound healing, particularly for difficult-to-treat wounds, presents a serious threat and may lead to complications. Currently available dressings lack mucoadhesion, safety, efficacy, and, most importantly, patient compliance. Herein, we developed a unique, simple, and inexpensive injectable chitosan-methoxy polyethylene glycol (chitosan-mPEG) hybrid hydrogel with tunable physicochemical and mechanical properties for wound healing. The detailed physicochemical and rheological characterization of the chitosan-mPEG hydrogel has revealed chemical interaction between available -NH2 groups of chitosan and -COOH groups of mPEG acid, which, to our perspective, enhanced the mechanical and wound healing properties of hybrid chitosan and mPEG hydrogel compared to solo chitosan or PEG hydrogel. By introducing mPEG, the wound healing ability of hydrogel is synergistically improved due to its antibacterial feature, together with chitosan's innate role in hemostasis and wound closure. The detailed hemostasis and wound closure potential of the chitosan-mPEG hydrogel were investigated in a rat model, which confirmed a significant acceleration in wound healing and ultimately wound closure. In conclusion, the developed chitosan-mPEG hydrogel met all the required specifications and could be developed as a promising material for hemostasis, especially wound management, and as an excellent candidate for wound healing application.

In-vitro Release Evaluation of Growth Hormone from an Injectable In-Situ Forming Gel Using PCL-PEG-PCL Thermosensitive Triblock

OBJECTIVE

An injectable long acting In-Situ Forming Gel (ISFG) of human Growth Hormone (hGH) was prepared by using triblock PCL-PEG-PCL (Mw 1500-1500-1500). Ring-Opening Polymerization (ROP) of triblock using microwave was applied.

METHODS

The BCA protein assay Kit was used to determine the concentration of hGH in the in-vitro release medium. Finally, Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) tests and Circular Dichroism (CD) spectrum were done to approve the stability of released hGH. The result of ROP demonstrated that the proportion of PCL to PEG accorded with the initial molar ratio of the monomers. The cross-section of the Surface Electron Microscopy (SEM) indicated the porous framework of the hydrogel could load the drug into its tridimensional matrixes structure. There is the low initial burst release of hGH from the supramolecular hydrogel.

RESULTS

The maximum in-vitro release of hGH was 71.2 % ± 1.5 that were due to hGH degrading after this time (21 days). The CD spectrum and SDS-PAGE results confirmed the stability of hGH during invitro release evaluation.

CONCLUSION

The results suggest that the sustained-release formulation using PCL-PEG-PCL can be applied to control the release of hGH.

The gamut of perspectives, challenges, and recent trends for in situ hydrogels: a smart ophthalmic drug delivery vehicle

Polymers have a major role in the controlled delivery of pharmaceutical compounds to a targeted portion of the body. In this quest, a high priority research area is the targeted delivery of ophthalmic drugs to the interior regions of the eyes. Due to their complex anatomical/biochemical nature. This necessitates an advanced drug delivery cargo that could administer a therapeutic agent to the targeted location by evading various obstacles. The ongoing focus is to design an ophthalmic formulation by coupling it with a smart in situ forming polymeric hydrogel. These smart macromolecules have an array of unique theranostic properties and can utilize the in vivo biological parameters as a stimulus to change their macromolecular state from liquid to gel. The fast gelling hydrogel improves the corneal contact time, facilitates sustained drug release, resists the burst-out effect, and assists drug permeability to anterior regions. This review summarizes the rationale, scientific objectives, properties, and classification of the biologically important in situ hydrogels in the niche of ophthalmic drug delivery. The current trends and prospectives of the array of stimulus-responsive polymers, copolymers, and nanomaterials are discussed broadly. The crucial biointerfacial attributes with pros and cons are reviewed by investigating the effect of the nature of polymers as well as the ratio/percentage of additives and copolymers that influence the overall performance.

Thermogelling Platform for Baicalin Delivery for Versatile Biomedical Applications

Baicalin (BG) is a natural glycoside with several promising therapeutic and preventive applications. However, its pharmaceutical potential is compromised by its poor water solubility, complex oral absorption kinetics, and low bioavailability. In this work, BG was incorporated in a series of chitosan (Ch)/glycerophosphate (GP)-based thermosensitive hydrogel formulations to improve its water solubility and control its release profile. Molecular interactions between BG and GP were investigated using Fourier transform infrared spectroscopy (FT-IR), and the ability of GP to enhance the water solubility of BG was studied in different release media. Drug-loaded Ch/GP hydrogels were prepared and characterized for their gelation time, swelling ratio, and rheological properties in addition to surface and internal microstructure. Polyethylene glycol (PEG) 6000 and hydroxypropyl methyl cellulose (HPMC) were incorporated in the formulations at different ratios to study their effect on modulating the sol-gel behavior and the in vitro drug release. In vivo pharmacokinetic (PK) studies were carried out using a rabbit model to study the ability of drug-loaded Ch/GP thermosensitive hydrogels to control the absorption rate and improve the bioavailability of BG. Results showed that the solubility of BG was enhanced in the presence of GP, while the incorporation of PEG and/or HPMC had an impact on gelation time, rheological behavior, and rate of drug release in vitro. PK results obtained following buccal application of drug-loaded Ch/GP thermosensitive hydrogels to rabbits showed that the rate of BG absorption was controlled and the in vivo bioavailability was increased by 330% relative to BG aqueous oral suspension. The proposed Ch/GP thermosensitive hydrogel is an easily modifiable delivery platform that is not only capable of improving the solubility and bioavailability of BG following buccal administration but also can be suited for various local and injectable therapeutic applications.

Vancomycin-loaded HPMC microparticles embedded within injectable thermosensitive chitosan hydrogels

Antibiotic use is an essential method for the treatment of bacterial infections. In certain cases, antibiotics are not effective because of the distribution problems caused by physiological barriers in the body. Such problems are thought to be minimized by development of sustained release systems which involve implantation of antibiotic loaded polymeric systems directly to the site of infection. In this work, a new composite vancomycin hydrochloride release system based on HPMC microparticles and chitosan/glycerophosphate (Ch/Gp) thermosensitive hydrogel was designed for the aim of local treatment of osteomyelitis. Vancomycin-loaded HPMC microparticles (Van-HPMCs) were prepared by spray drying method. The SEM results showed that these particles had a mean diameter of 1.5-6.4 μm with a narrow size distribution and homogeneous particle production. Their drug encapsulation efficiency was 72.6%. The Van-HPMCs were embedded in an injectable Ch/Gp solution to introduce a composite drug release platform (Van/HPMC-Ch/Gp). In vitro release studies indicated that inclusion of the Van-HPMCs into the Ch/Gp hydrogel caused a reduction in both the release rate and total amount of vancomycin release, which suggests that HPMC microparticles entrapped into the Ch/Gp hydrogels showed more suitable sustained release kinetics for local antibiotics delivery.

Rheological Study and Molecular Dynamics Simulation of Biopolymer Blend Thermogels of Tunable Strength

The temperature-induced gelation of chitosan/glycerophosphate (Chs/GP) systems through physical interactions has shown great potential for various biomedical applications. In the present work, hydroxyethyl cellulose (HEC) was added to the thermosensitive Chs/GP solution to improve the mechanical strength and gel properties of the incipient Chs/HEC/GP gel in comparison with the Chs/GP hydrogel at body temperature. The physical features of the macromolecular complexes formed by the synergistic interaction between chitosan and hydroxyethyl cellulose in the presence of β-glycerophosphate disodium salt solution have been studied essentially from a rheological point of view. The temperature and time sweep rheological characterizations of the thermogelling systems revealed that the sol-gel transition temperature of the Chs/HEC/GP blends is equal to 37 °C at neutral pH; with increasing HEC content in the solutions, more compact networks with considerably improved gel strength are formed without influencing the gelation time. The formed hydrogel matrix has enough mechanical integrity and adequate strength for using it as injectable in situ forming matrices for biomedical applications. The classical Winter-Chambon (W-C) and Fredrickson-Larson (F-L) theories were applied to determine the gel point. In view of the obtained results, it is shown that the F-L theory can be employed as a robust and less tedious method than the W-C approach to precisely determine the gel point in these systems. At the end, molecular simulation studies were conducted by using ab initio quantum mechanics (QM) calculations carried out on Chs and HEC models, and molecular dynamics (MD) simulations of solvated Chs/HEC blend systems showed the binding behavior of Chs/HEC polymers. Analyses of interaction energy, radial distribution function, and hydrogen bonding from simulation studies strongly supported the experimental results; they all disclosed that hydrogen-bond formation between Chs moieties with regard to HEC chains plays an important role for the stabilization of the complexes.

Intra-articular Administration of Chitosan Thermosensitive In Situ Hydrogels Combined With Diclofenac Sodium-Loaded Alginate Microspheres

The aims of this study were to prepare fine intra-articular-administrated chitosan thermosensitive hydrogels combined with alginate microspheres and to investigate the possibility of those hydrogels as a drug delivery system for promoting the anti-inflammation effect. Diclofenac sodium containing alginate microspheres was prepared by a modified emulsification and/or gelation method and then dispersed into injectable thermosensitive hydrogels, consisting of chitosan and β-glycerophosphate. The final combined hydrogels were evaluated in terms of their morphology properties, rheological properties, in vitro drug release, and in vivo biocompatibility and pharmacodynamics behaviors. The optimized formulation exhibited sol-gel transition at 31.72 ± 0.42°C and quickly turned into gel within 5 min, with sustained drug release characteristics followed Ritger-Peppas equation, which could prolong the in vitro drug release to 5 days. In addition, the anti-inflammation efficacy of the combined hydrogels in rabbits with experimental rheumatoid arthritis was higher than that of drug solution and pure chitosan hydrogels. Those results demonstrated that these combined hydrogels could become a potential drug delivery system for improving the therapeutic effect of diclofenac sodium and suggested an important technology platform for intra-articular administration.

Thermosensitive hydrogel for periodontal application: in vitro drug release, antibacterial activity and toxicity evaluation

Injectable thermosensitive chitosan hydrogel is an attractive temperature-induced sol-gel solution that is widely used in drug delivery and biomedical applications. In this study, an injectable antimicrobial delivery system for periodontal treatment based on chitosan/gelatin/β-glycerolphosphate solution has been developed. The result of thermal and mechanical evaluations of chitosan/gelatin/β-glycerolphosphate hydrogel showed that adding gelatin to chitosan/β-glycerolphosphate solution significantly decreased gelling time and increased gel strength at 37℃. The antimicrobial agents chosen for release studies were metronidazole with a low molecular weight and vancomycin hydrochloride with a high molecular weight. The initial burst and total in vitro drug release for metronidazole was 13% and 67%, respectively. The initial burst and total drug release for vancomycin hydrochloride was relatively low at 3% and 23%, respectively. The momentary and total percentage of metronidazole accumulated in the phosphate buffer revealed that chitosan/gelatin/β-glycerolphosphate can develop and maintain sustained release of metronidazole in concentrations that are effective for eliminating pathogenic bacteria over time. Cytotoxicity evaluations show that chitosan/gelatin/β-glycerolphosphate thermosensitive hydrogel is a drug carrier with no cytotoxic effects.