Ni2+ supported on hydroxyapatite-core-shell γ-Fe2O3 nanoparticles: a novel, highly efficient and reusable lewis acid catalyst for the regioselective azidolysis of epoxides in water

Composites of hydroxyapatite and their application in adsorption, medicine and as catalysts

Composites of hydroxyapatite, recognized by its peculiar crystal architecture and distinctive attributes showcased the potential in adsorbing heavy metal ions and radioactive elements as well as selected organic substances. In this paper, the intrinsic mechanism of adsorption by composites hydroxyapatite was proved for the first time. Subsequently, selectivity and competitiveness of composites of hydroxyapatite for a variety of environments containing various interferences from cations, anions, and organic molecules are elucidated. Next, composites of hydroxyapatite were further categorized according to their morphological dimensions. Adsorption properties and intrinsic mechanisms were investigated based on different morphologies. It was shown that although composites of hydroxyapatite were characterized by excellent adsorption capacity and cost-effectiveness, their application is often challenging due to inherent fragility and agglomeration, technical problems required for their handling as well as difficulty in recycling. Finally, to address these issues, the paper discusses the tendency of hydroxyapatite composites to adsorb heavy metal ions and radioactive elements as well as the limitations of their applications. Summarizing the limitations and future directions of modification of HAP in the field of heavy metal ions and different substances contamination abatement, the paper provides insightful perspectives for its gradual improvement and rational application.

Synthesis, characterization, and application of α-Fe2 O3 @TiO2 @SO3 H photo-Fenton catalyst for photocatalytic degradation of biologically pre-treated wood industry wastewater

The efficiency of removing chemical oxygen demand (COD) and turbidity from wood wastewater was investigated using a sequencing batch reactor (SBR) and the photo-Fenton process. A total of 94.78% of COD reduction and 99.9% of turbidity removal were observed under optimum conditions of SBR, which consisted of an organic loading rate (OLR) of 0.453 kg COD m^-3  day^-1 , mixed liquor suspended solids (MLSS) of 4564 mg L^-1 , and cycle time of 48 h. A magnetic α-Fe₂ O₃ @TiO₂ @SO₃ H nanocatalyst was prepared as a heterogeneous Fenton reagent. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and elemental mapping (MAP) analyses were performed to determine the structure and morphology of synthesized photocatalyst. The response surface methodology (RSM) was used to optimize the process based on a central composite design (CCD). The maximum photocatalytic degradation of 87.54% and COD reduction of 83.35% were achieved at a dosage of 0.6 g L^-1 of catalyst, 30 mg L^-1 of H₂ O₂ , and pH of 3.5 for 45 min. The results indicated that a combination of the SBR process and α-Fe₂ O₃ @TiO₂ @SO₃ H could be used as an effective method for the treatment of wood wastewater. PRACTITIONER POINTS: A combination of the SBR and photo-Fenton process was introduced as an impressive method for wood industry wastewater treatment. The efficiencies of COD, BOD₅ , NO₃ -N, PO₄ -P, and color removal were obtained according to the standard limits in Iran. To our knowledge, this study is the first report of the use of synthesized α-Fe₂ O₃ @TiO₂ @SO₃ H photocatalyst for the wood industry wastewater treatment.

Preparation and application of α-Fe2O3@TiO2@SO3H for photocatalytic degradation and COD reduction of woodchips industry wastewater

In this study, we investigated the efficiency of photocatalytic degradation and chemical oxygen demand (COD) reduction from woodchips industry wastewater using α-Fe₂O₃@TiO₂@SO₃H. A magnetic α-Fe₂O₃@TiO₂@SO₃H was prepared as a heterogeneous photo-Fenton catalyst. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and elemental mapping (MAP) analyses were performed to determine the structure and morphology of synthesized photocatalysts. The response surface methodology (RSM) was used to optimize the photo-Fenton process based on a Box-Behnken design (BBD). The parameters such as catalyst dosage, H₂O₂ dosage, pH, and contact time on photocatalytic degradation and the reduction of COD were studied. The maximum photocatalytic degradation of 93.75% and COD reduction of 86.54% were achieved at a dosage of the catalyst of 1 g L^-1, H₂O₂ dosage of 40 mg L^-1, and a pH of 3.5 at 45 min. The kinetics of the photo-Fenton process was studied for the woodchips wastewater treatment under optimum conditions. The pseudo-second-order kinetic model for photocatalytic degradation and COD reduction was obtained. The results indicated that a α-Fe₂O₃@TiO₂@SO₃H could be used as an effective heterogeneous photocatalyst for the treatment of woodchips industry wastewater. Preparation and application of α-Fe₂O₃@TiO₂@SO₃H for photocatalytic degradation and COD reduction of woodchips industry wastewater.

Synthesis and characterization of γ-Fe2O3@SiO2–(CH2)3–PDTC–Pd magnetic nanoparticles: a new and highly active catalyst for the Heck/Sonogashira coupling reactions

A novel catalyst is synthesized based on the immobilization of palladium on γ-Fe₂O₃@SiO₂–(CH₂)₃–PDTC nanoparticles and is used as a highly active catalyst for the Heck/Sonogashira coupling reactions.

Preparation and application of α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework for photocatalytic degradation of paraquat

In this study, a new magnetic α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst was successfully synthesized. The material synthesized had been fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, transmission electron microscopy, and Brunauer–Emmett–Teller isotherm methods. The X-ray diffraction analysis corroborates that nanoparticles are polycrystalline with rhombohedral and tetragonal crystal structures for Fe2O3 and TiO2, respectively. In addition, the photocatalytic degradation of the herbicide paraquat in the presence of α-Fe2O3@MIL-101(Cr)@TiO2 under ultraviolet (UV) irradiation was studied. The effect of experimental parameters such as the initial concentration of catalyst, the pH, and the initial paraquat was investigated. The optimal conditions were achieved for concentration of catalyst 0.2 g L−1, pH 7, and concentration of paraquat 20 mg L−1. The photocatalytic degradation efficiency was 88.39% after 15 min with α-Fe2O3@MIL-101(Cr)@TiO2 under UV irradiation. The pseudo-second-order kinetic model for photocatalytic degradation of paraquat was obtained. The catalysts could be recovered and reused without any loss of efficiency for five times in the consequent reactions. To the best of our knowledge, this is the first report on the photocatalytic degradation of paraquat using new α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst under UV irradiation condition.