FeCu bimetallic metal organic frameworks photo-Fenton synergy efficiently degrades organic pollutants: Structure, properties, and mechanism insight

The high ion leaching, low photogenerated charge separation efficiency, and slow metal valence cycling of Fe-based metal organic frameworks (MOFs) have limited their application in the deep treatment of organic pollutants. Herein, FeCu bimetallic MOFs (FeCuBDC) were synthesized using a modified solvothermal method, and a coupled photo-Fenton degradation system was successfully constructed. Degradation performance tests showed that FeCuBDC could efficiently degrade 99.3% ± 0.1% of 50 mg/L phenol within 40 min. The reaction rate constants of the photo-Fenton system were 11.0 and 64.7 times higher than those of the single Fenton reaction and photocatalysis, respectively. FeCuBDC also exhibits good cycling stability, degradation generalization, and excellent photoelectric catalytic properties. Such a considerable enhancement in the overall performance pertains to the following. First, the introduction of Cu into Fe-MOFs not only improves the crystallinity and stability, but also reduces the band gap value, increases the absorption capacity of visible light, and promotes the generation of photogenerated carriers. Second, the FeCu in MOFs are all mixed valence. Initially, the high-valence FeCu captures photogenerated electrons and promotes photogenerated charge separation and transfer. Then, the low-valence FeCu adsorbs and decomposes H2O2, accelerating the valence cycling of the bimetallic sites. The core of the reaction mechanism is that FeCuBDC effectively promotes the photo-Fenton synergy.

Fenton-Like Reaction: Recent Advances and New Trends

The Fenton reaction refers to the reaction in which ferrous ions (Fe2+) produce hydroxyl radicals and other reactive oxidizing substances by decomposing hydrogen peroxide (H2O2). This paper reviews the mechanism, application system, and materials employed in the Fenton reaction including conventional homogeneous and non-homogeneous Fenton reactions as well as photo-, electrically-, ultrasonically-, and piezoelectrically-triggered Fenton reactions, and summarizes the applications in the degradation of soil oil pollutions, landfill leachate, textile wastewater, and antibiotics from a practical point of view. The mineralization paths of typical pollutant are elucidated with relevant case studies. The paper concludes with a summary and outlook of the further development of Fenton-like reactions.

Z-scheme heterojunction composed of Fe-doped g-C3N4 and Bi2MoO6 for photo-fenton degradation of antibiotics over a wide pH range: Activity and toxicity assessment

In photo-Fenton technology, the narrower pH range limits its practical application for antibiotic wastewater remediation. Therefore, in this study, a Z-scheme heterojunction photo-Fenton catalyst was constructed by Fe-doped graphite-phase carbon nitride in combination with bismuth molybdate for the degradation of typical antibiotics. Fe doping can shorten the band gap and increase visible-light absorption. Simultaneously, the constructed Z-scheme heterojunction provides a better charge transfer pathway for the photo-Fenton reaction. Within 30 min, Fe3CN/BMO-3 removed 95.54% of tetracycline hydrochloride (TC), and its remarkable performance was the higher Fe3+/Fe2+ conversion efficiency through the decomposition of H2O2. The Fe3CN/BMO-3 catalyst showed remarkable photo-Fenton degradation performance in a wide pH range (3.0-11.0), and it also had good stability in the treatment of TC wastewater. Furthermore, the order of action of the active species was h+ > ·O2- > 1O2 > ·OH, and the toxicity assessment suggested that Fe3CN/BMO-3 was effective in reducing the biotoxicity of TC. The catalyst proved to be an economically feasible and applicable material for antibiotic photo-Fenton degradation, and this study provides another perspective on the application of elemental doping and constructed heterojunction photo-Fenton technology for antibiotic water environmental remediation.

Broad Spectral Response FeOOH/BiO2-x Photocatalyst with Efficient Charge Transfer for Enhanced Photo-Fenton Synergistic Catalytic Activity

In this work, to promote the separation of photogenerated carriers, prevent the catalyst from photo-corrosion, and improve the photo-Fenton synergistic degradation of organic pollutants, the coating structure of FeOOH/BiO2-x rich in oxygen vacancies was successfully synthesized by a facile and environmentally friendly two-step process of hydrothermal and chemical deposition. Through a series of degradation activity tests of synthesized materials under different conditions, it was found that FeOOH/BiO2-x demonstrated outstanding organic pollutant degradation activity under visible and near-infrared light when hydrogen peroxide was added. After 90 min of reaction under photo-Fenton conditions, the degradation rate of Methylene Blue by FeOOH/BiO2-x was 87.4%, significantly higher than the degradation efficiency under photocatalysis (60.3%) and Fenton (49.0%) conditions. The apparent rate constants of FeOOH/BiO2-x under photo-Fenton conditions were 2.33 times and 3.32 times higher than photocatalysis and Fenton catalysis, respectively. The amorphous FeOOH was tightly coated on the layered BiO2-x, which significantly increased the specific surface area and the number of active sites of the composites, and facilitated the improvement of the separation efficiency of the photogenerated carriers and the prevention of photo-corrosion of BiO2-x. The analysis of the mechanism of photo-Fenton synergistic degradation clarified that ·OH, h+, and ·O2- are the main active substances involved in the degradation of pollutants. The optimal degradation conditions were the addition of the FeOOH/BiO2-x composite catalyst loaded with 20% Fe at a concentration of 0.5 g/L, the addition of hydrogen peroxide at a concentration of 8 mM, and an initial pH of 4. This outstanding catalytic system offers a fresh approach to the creation and processing of iron-based photo-Fenton catalysts by quickly and efficiently degrading various organic contaminants.

Preparation of three-dimensional ordered macroporous Ag/LaFeO3 and heterogeneous photo-Fenton degradation of penicillin G potassium

3DOMLaFeO3 was prepared by template method combined with sol-gel method using monodisperse polystyrene (PS) microspheres as template, and Ag/3DOMLaFeO3 perovskite catalyst was prepared by impregnation method combined with sodium borohydride reduction method. The catalysts were characterised by means of TG, XRD, SEM, BET, XPS, UV-vis DRS, etc. The photo-Fenton catalytic performance, stability and catalytic reaction mechanism of Ag/3DOMLaFeO3 were studied with penicillin G potassium (PEN G) as the model pollutant. The results indicated that the as-prepared Ag/3DOMLaFeO3 exhibited a three-dimensional ordered macroporous (3DOM) structure, and the light capture and mass transfer were enhanced through abundant pores and large specific surface area. Based on the surface plasmon resonance effect (SPR), Ag loading enhanced the absorption of the material in the visible light region, and inhibited the recombination of photogenerated carriers, which improved the photocatalytic performance of 3DOMLaFeO3 under visible light. Under the conditions of hydrogen peroxide dosage of 1.5 mL·L-1, initial pH of 5, PEN G initial concentration of 100 mg·L-1, catalyst dosage of 300 mg·L-1, xenon lamp irradiation, the degration ratio of PEN G and the removal rate of TOC reached 99.99% and 85.45% within 120 min, respectively. In addition, it had a wide range of pH application, excellent stability and practical application value. The quenching experiment and ESR test showed that ·OH and ·O2- were the reasons for high catalytic degradation. The least square method was used to fit the experimental data, and the results displayed that the degradation of PEN G was approximately in line with the first-order kinetic reaction.

Ferryl Ion in the Photo-Fenton Process at Acidic pH: Occurrence, Fate, and Implications

Fenton processes produce reactive species that can oxidize organic compounds in natural and engineered systems. While it is well-documented that Fenton reactions produce hydroxyl radical (HO•) under acidic conditions, we demonstrated the generation of ferryl ion (FeIVO2+) in the UV/Fe(III) and UV/Fe(III)/H2O2 systems at pH 2.8 using methyl phenyl sulfoxide (PMSO) as the probe compound. Moreover, we clarified that FeIVO2+ is parallelly formed via the oxidation of Fe(III) by HO• and the O-O homolysis of [FeIII-OOH]2+ in the photo-Fenton process. The rate constant for the reaction between HO• and Fe3+ measured by laser flash photolysis was 4.41 × 107 M-1 s-1. The rate constant and quantum yield for thermal and photo O-O homolysis of [FeIII-OOH]2+ complex were 1.4 × 10-2 s-1 and 0.3, respectively, which were determined by fitting PMSO2 formation. While FeIVO2+ forms predominantly through the reaction between HO• and Fe3+ in the absence of H2O2, the relative contribution of [FeIII-OOH]2+ O-O homolysis to FeIVO2+ formation highly depends on the molar ratio of [H2O2]0/[Fe(III)]0, the level of HO• scavenging, and incident irradiance in the UV/Fe(III)/H2O2 system. Accordingly, an optimized kinetic model was developed by incorporating FeIVO2+-involved reactions into the conventional photo-Fenton model, which can accurately predict Fe(II) formation and contaminant decay in the UV/Fe(III) and UV/Fe(III)/H2O2 systems. Our study illuminated the underlying formation mechanism of reactive oxidative species in the photo-Fenton process and highlighted the role of FeIVO2+ evolution in modulating the iron cycle and pollutant abatement therein.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Adsorption and Photodegradation of Lanasol Yellow 4G in Aqueous Solution by Natural Zeolite Treated by CO2-Laser Radiation

Natural zeolite is a widely used material with excellent environmental cleaning performance, especially in water and wastewater treatment. Natural zeolite (Z_ini) calcined by CO₂-laser radiation (ZL) was tested as a catalyst for the photodegradation and the adsorption of industrial azo dye Lanasol Yellow 4G (LY4G) in water. Morphology, chemical structure, and surface composition of Z_ini and ZL were analyzed by XRD, SEM, EDS, and XPS. UV/Visible spectrophotometry was used to evaluate the photocatalytic activity of Z_ini and ZL. The photocatalytic activity of the studied zeolites was associated with the presence of Fe oxides in their composition. Laser-treated natural zeolite showed higher efficiency as a photocatalyst compared to untreated natural zeolite.

Highly Efficient Photo-Fenton Ag/Fe2O3/BiOI Z-Scheme Heterojunction for the Promoted Degradation of Tetracycline

Novel Ag/Fe₂O₃/BiOI Z-scheme heterostructures are first fabricated through a facile hydrothermal method. The composition and properties of as-synthesized Ag/Fe₂O₃/BiOI nanocomposites are characterized by powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, UV-Vis diffuse reflectance spectra, etc. The Ag/Fe₂O₃/BiOI systems exhibit remarkable degradation performance for tetracycline (TC). In particular, the composite (Ag/Fe₂O₃/BiOI-2) shows the highest efficiency when the contents of Ag and α-Fe₂O₃ are 2 wt% and 15%, respectively. The effects of operating parameters, including the solution pH, H₂O₂ concentration, TC concentration, and catalyst concentration, on the degradation efficiency are investigated. The photo-Fenton mechanism is studied, and the results indicated that •O^2- is the main active specie for TC degradation. The enhanced performance of Ag/Fe₂O₃/BiOI heterostructures may be ascribed to the synergic effect between photocatalysis and the Fenton reaction. The formation of Ag/Fe₂O₃/BiOI heterojunction is beneficial to the transfer and separation of charge carriers. The photo-generated electrons accelerate the Fe²⁺/Fe³⁺ cycle and create the reductive reaction of H₂O₂. This research reveals that the Ag/Fe₂O₃/BiOI composite possesses great potential in wastewater treatment.

Double-Shelled Porous g-C3 N4 Nanotubes Modified with Amorphous Cu-Doped FeOOH Nanoclusters as 0D/3D Non-Homogeneous Photo-Fenton Catalysts for Effective Removal of Organic Dyes

Graphite phased carbon nitride (g-C₃ N₄ ) has attracted extensive attention attributed to its non-toxic nature, remarkable physical-chemical stability, and visible light response properties. Nevertheless, the pristine g-C₃ N₄ suffers from the rapid photogenerated carrier recombination and unfavorable specific surface area, which greatly limit its catalytic performance. Herein, 0D/3D Cu-FeOOH/TCN composites are constructed as photo-Fenton catalysts by assembling amorphous Cu-FeOOH clusters on 3D double-shelled porous tubular g-C₃ N₄ (TCN) fabricated through one-step calcination. Combined density functional theory (DFT) calculations, the synergistic effect between Cu and Fe species could facilitate the adsorption and activation of H₂ O₂ , and the separation and transfer of photogenerated charges effectively. Thus, Cu-FeOOH/TCN composites acquire a high removal efficiency of 97.8%, the mineralization rate of 85.5% and a first-order rate constant k = 0.0507 min^-1 for methyl orange (MO) (40 mg L^-1 ) in photo-Fenton reaction system, which is nearly 10 times and 21 times higher than those of FeOOH/TCN (k = 0.0047 min^-1 ) and TCN (k = 0.0024 min^-1 ), respectively, indicating its universal applicability and desirable cyclic stability. Overall, this work furnishes a novel strategy for developing heterogeneous photo-Fenton catalysts based on g-C₃ N₄ nanotubes for practical wastewater treatment.

Application of Photo-Fenton-Membrane Technology in Wastewater Treatment: A Review

Photo-Fenton coupled with membrane (photo-Fenton-membrane) technology offers great potential benefits in future wastewater treatment because it can not only degrade refractory organics, but also separate different pollutants from water; additionally, it often has a membrane-self-cleaning ability. In this review, three key factors of photo-Fenton-membrane technology, photo-Fenton catalysts, membrane materials and reactor configuration, are presented. Fe-based photo-Fenton catalysts include zero-valent iron, iron oxides, Fe-metal oxides composites and Fe-based metal-organic frameworks. Non-Fe-based photo-Fenton catalysts are related to other metallic compounds and carbon-based materials. Polymeric and ceramic membranes used in photo-Fenton-membrane technology are discussed. Additionally, two kinds of reactor configurations, immobilized reactor and suspension reactor, are introduced. Moreover, we summarize the applications of photo-Fenton-membrane technology in wastewater, such as separation and degradation of pollutants, removal of Cr(VI) and disinfection. In the last section, the future prospects of photo-Fenton-membrane technology are discussed.

Sustainable Wood-Based Iron Photocatalyst for Multiple Uses with Sunlight: Water Treatment and Radical Photopolymerization

A sustainable photocatalyst for use with multiple purpose comprising demethylated lignin (Fe3O4@D-wood) was made by treatment of wood and iron oxide. Characterization followed by XRD, UV-Vis, photo-current studies, and electrochemical measurements. This material became subject of photocatalytic explorations for water treatment and material synthesis by radical photopolymerization. Exposure of Fe3O4@D-wood with artificial sunlight showed an improved activity considering photochemical oxidation of organic pollutants in the presence of H2O2. The efficient generation of reactive radicals brought this system also to photopolymerization. Here, radicals based on reactive oxygen species (ROS) generated in the catalytic cycle can be seen as the dominating species to initiate radical polymerization. A mixture of UDMA and TPGDA showed good reactivity with cumene hydroperoxide (CHP). Photocatalyst used for water treatment facilitates reuse for photopolymerization.

Photo-Fenton and TiO(2) Photocatalytic Inactivation of Model Microorganisms under UV-A; Comparative Efficacy and Optimization

Photocatalytic inactivation of pathogens in aqueous waste is gaining increasing attention. Several homogeneous and heterogeneous photocatalytic protocols exist using the Fenton's reagent and TiO₂, respectively. A comprehensive study of homogeneous and heterogeneous photocatalysis on a range of microorganisms will significantly establish the most efficient method. Here, we report a comparative study of TiO₂- and Fe⁺³-based photocatalytic inactivation under UV-A of diverse microorganisms, including Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, bacterial spores (Bacillus stearothermophilus spores) and viruses (MS2). We also present data on the optimization of TiO₂ photocatalysis, including optimal catalyst concentration and H₂O₂ supplementation. Our results indicate that both photo-Fenton and TiO₂ could be successfully applied for the management of microbial loads in liquids. Efficient microorganism inactivation is achieved with homogeneous photocatalysis (7 mg/L Fe⁺³, 100 mg/L H₂O₂, UV-A) in a shorter processing time compared to heterogeneous photocatalysis (0.5 g/L TiO₂, UV-A), whereas similar or shorter processing is required when heterogenous photocatalysis is performed using microorganism-specific optimized TiO₂ concentrations and H₂O₂ supplementation (100 mg/L); higher H₂O₂ concentrations further enhance the heterogenous photocatalytic inactivation efficiency. Our study provides a template protocol for the design and further application for large-scale photocatalytic approaches to inactivate pathogens in liquid biomedical waste.

Degradation of Agro-Industrial Wastewater Model Compound by UV-A-Fenton Process: Batch vs. Continuous Mode

The degradation of a model agro-industrial wastewater phenolic compound (caffeic acid, CA) by a UV-A-Fenton system was investigated in this work. Experiments were carried out in order to compare batch and continuous mode. Initially, batch experiments showed that UV-A-Fenton at pH 3.0 (pH of CA solution) achieved a higher generation of HO•, leading to high CA degradation (>99.5%). The influence of different operational conditions, such as H2O2 and Fe2+ concentrations, were evaluated. The results fit a pseudo first-order (PFO) kinetic model, and a high kinetic rate of CA removal was observed, with a [CA] = 5.5 × 10−4 mol/L, [H2O2] = 2.2 × 10−3 mol/L and [Fe2+] = 1.1 × 10−4 mol/L (kCA = 0.694 min−1), with an electric energy per order (EEO) of 7.23 kWh m−3 order−1. Under the same operational conditions, experiments in continuous mode were performed under different flow rates. The results showed that CA achieved a steady state with higher space-times (θ = 0.04) in comparison to dissolved organic carbon (DOC) removal (θ = 0−0.020). The results showed that by increasing the flow rate (F) from 1 to 4 mL min−1, the CA and DOC removal rate increased significantly (kCA = 0.468 min−1; kDOC = 0.00896 min−1). It is concluded that continuous modes are advantageous systems that can be adapted to wastewater treatment plants for the treatment of real agro-industrial wastewaters.

Molecular Oxygen Activation by Citric Acid Boosted Pyrite-Photo-Fenton Process for Degradation of PPCPs in Water

Pyrite has been used in photo-Fenton reactions for the degradation of pollutants, but the application of photo-Fenton processes with extra H₂O₂ in real water/wastewater treatment has still been limited by the economic cost of H₂O₂ and artificial light sources. Herein, citric acid (CA) and simulated/natural sunlight are used to develop a pyrite-based photo-Fenton system (pyrite-CA-light) in situ generating H₂O₂ through the enhanced activation of molecular oxygen. The degradation of pharmaceuticals and personal care products (PPCPs), especially acetaminophen (APAP) as the main target pollutant, in the pyrite-CA-light system was investigated. The effects of influencing factors such as various organic acids, APAP concentration, pH, pyrite dosage, CA concentration and co-existing anions (HCO₃^-, Cl^-, NO₃^-, SO₄^2- and H₂PO₄^-) were examined. At a pyrite dosage of 0.1 g L^-1, CA concentration of 0.6 mM and an initial pH of 6.0, the degradation efficiency of APAP (30 μM) was 99.1% within 30 min under the irradiation of xenon lamp (70 W, λ ≥ 350 nm). Almost the same high efficiency of APAP degradation (93.9%) in the system was achieved under natural sunlight irradiation (ca. 650 W m^-2). The scavenging experiments revealed that the dominant active species for degrading APAP was hydroxyl radical (HO^•). Moreover, a quantitative structural-activity relationship (QSAR) model for pseudo-first-order rate constants (k_obs) was established with a high significance (R² = 0.932, p = 0.001) by using three descriptors: octanol-water partition coefficient (logKow), dissociation constant (pK_a) and highest occupied molecular orbital (HOMO). This work provides an innovative strategy of the photo-Fenton process for the degradation of PPCPs using natural minerals and ordinary carboxylic acid under sunlight.

Enhanced Photo-Assisted Fenton Degradation of Antibiotics over Iron-Doped Bi-Rich Bismuth Oxybromide Photocatalyst

Herein, combining photocatalysis and Fenton oxidation, a photo-assisted Fenton system was conducted using Fe-doped Bi₄O₅Br₂ as a highly efficient photocatalyst to realize the complete degradation of Tetracycline antibiotics under visible light. It has been observed that the optimized photocatalyst 5%Fe-doped Bi₄O₅Br₂ exhibits a degradation efficiency of 100% for Tetracycline with H₂O₂ after 3 h visible-light irradiation, while a degradation percentage of 59.8% over the same photocatalyst and 46.6% over pure Bi₄O₅Br₂ were obtained without the addition of H₂O₂ (non-Fenton process). It is unambiguous that a boost photo-assisted Fenton system for the degradation of Tetracycline has been established. Based on structural analysis, it demonstrated that the Fe atoms in place of the Bi sites may result in the distortion of the local structure, which induced the occurrence of the spontaneous polarization and thus enhanced the built-in electric field. The charge separation efficiency is enhanced, and the recombination of electrons and holes is inhabited so that more charges are generated to reach the surface of the photocatalyst and therefore improve the photocatalytic degradation efficiency. Moreover, more Fe (II) sites formed on the 5%Fe-Bi₄O₅Br₂ photocatalyst and facilitated the activation of H₂O₂ to form oxidative species, which greatly enhanced the degradation efficiency of Tetracycline.

Efficient Degradation of Congo Red in Water by UV-Vis Driven CoMoO4/PDS Photo-Fenton System

In order to improve the catalytic activity of cobalt molybdate (CoMoO₄), a PDS-activated and UV-vis assisted system was constructed. CoMoO₄ was prepared by coprecipitation and calcination, and characterized by XRD, FTIR, Raman, SEM, TEM, XPS, TGA Zeta potential, BET, and UV-Vis DRS. The results showed that the morphology of the CoMoO₄ nanolumps consisted of stacked nanosheets. XRD indicated the monoclinic structures with C2/m (C³_2h, #12) space group, which belong to α-CoMoO₄, and both Co²⁺ and Mo⁶⁺ ions occupy distorted octahedral sites. The pH of the isoelectric point (pHIEP) of CMO-8 at pH = 4.88 and the band gap of CoMoO₄ was 1.92 eV. The catalytic activity of CoMoO₄ was evaluated by photo-Fenton degradation of Congo red (CR). The catalytic performance was affected by calcination temperature, catalyst dosage, PDS dosage, and pH. Under the best conditions (0.8 g/L CMO-8, PDS 1 mL), the degradation efficiency of CR was 96.972%. The excellent catalytic activity of CoMoO₄ was attributed to the synergistic effect of photo catalysis and CoMoO₄-activated PDS degradation. The capture experiments and the ESR showed that superoxide radical (·O₂^-), singlet oxygen (¹O₂), hole (h⁺), sulfate (SO₄^-·), and hydroxyl (·OH^-) were the main free radicals leading to the degradation of CR. The results can provide valuable information and support for the design and application of high-efficiency transition metal oxide catalysts.

Environmental Assessment of Solar Photo-Fenton Processes at Mild Condition in the Presence of Waste-Derived Bio-Based Substances

The assessment of environmental sustainability has assumed great importance during the study and implementation of a new process, including those aimed to waste valorization and reuse. In this research, the environmental performance of the photo-Fenton processes was evaluated using the life cycle assessment (LCA) methodology. In particular, photo-Fenton conducted in mild conditions (almost neutral pH), using soluble bio-organic substances as auxiliary agents were compared with the "classic" photo-Fenton run at pH 2.8. The evaluation was carried out both, at the laboratory level and at pilot plant scale. LCA analysis shows that working in mild conditions reduces the environmental burden associated with the use of chemicals. On the other hand, the occurring drop in effectiveness significantly increases the overall impact, thus evidencing the need of considering the process as a whole.

The comparison of Fenton and photo-Fenton oxidation as a primary unit process for the treatment of raw textile wastewaters

The Fenton and photo-Fenton oxidation processes (FOP and PFOP) are usually applied as a secondary unit process, and direct usage of both processes is critical in textile wastewater treatment. There is seldom study on the direct application of the FOP or PFOP showing the treatment of raw textile industry wastewaters. This study demonstrates the application and comparison of both FOP and PFOP as single units separately for the treatment of wastewater in a textile industry producing woven fabrics. In both processes, the highest treatment efficiency was achieved at pH 3. Chemical oxygen demand (COD), suspended solids (SS), and color parameters in FOP reduced from 1341 to 254 mg/L, 99.5 to 19.9 mg/L, and 1396 to 97.7 Pt-Co, respectively. Separately, in the PFOP, 365-nm wavelength UV radiation sources have been used. In PFOP, the same parameters were reduced from 715 to 42.9 mg/L, 90 to 9 mg/L, and 2080 to 83.2 Pt-Co, respectively. These results were obtained at 0.7 g Fe2+ /L and 2 mM H2 O2 concentrations in both studies. PFOP can meet the textile industry receiving environment discharge standards of many countries, especially in Turkey. The use of PFOP as a single unit is possible in the treatment of textile industry wastewater without primary precipitation. The findings in this study may be practical for the adaptation of the processes on the field scale. PRACTITIONER POINTS: There is seldom study on the direct application of Fenton or photo-Fenton processes as a single unit to raw textile wastewaters This study shows the application of the Fenton or photo-Fenton processes as single units for the treatment of raw wastewater in a textile industry Results of both processes in this study meet the discharge standards of many countries Evaluations of efficiencies of both processes were achieved This study may be the focus of attention of treatment plant operators and researchers.

Preparation of Cotton Linters' Aerogel-Based C/NiFe2O4 Photocatalyst for Efficient Degradation of Methylene Blue

At present, the research focus has been aimed at the pursuit of the design and synthesis of catalysts for effective photocatalytic degradation of organic pollutants in wastewater, and further exploration of novel materials of the photodegradation catalyst. In this paper, the Sol-gel route after thermal treatment was used to produce NiFe₂O₄ carbon aerogel (NiFe₂O₄-CA) nanocomposites with cotton linter cellulose as the precursor of aerogel, by co-precipitating iron and nickel salts onto its substrate. The structure and composition of these materials were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), Raman spectra, high-resolution scanning electron microscopy (HR-SEM), high-resolution scanning electron microscope mapping (SEM-mapping), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET)'s surface area. The magnetic properties of the material were analyzed by a vibrating-sample magnetometer (VSM). Moreover, diffuse reflectance spectra (DRS), electrochemical impedance spectroscopy (EIS) and photo-luminescence spectroscopy (PL) characterized the photoelectric properties of this cellulose-aerogels-based NiFe₂O₄-CA. Methylene blue (MB) acted as the simulated pollutant, and the photocatalytic activity of NiFe₂O₄-CA nanocomposites under visible light was evaluated by adjusting H₂O₂ content and the pH value. The results showed that the optical absorption range of nickel ferrite was broadened by doping cellulose-aerogels-based carbon, which exerted more positive effects on photocatalytic reactions. This is because the doping of this aerogel carbon promoted a more uniform distribution of NiFe₂O₄ particles. Given the Methylene blue (MB) degradation reaction conformed to the first-order kinetic equation, the NiFe₂O₄-CA nanocomposites conducted excellent catalytic activity by maintaining almost 99% of the removal of MB (60 mg/L) within 180 min and upheld excellent stability over four consecutive cycles. This study indicated that NiFe₂O₄-CA nanocomposites reserved the potential as a future effective treatment of dye wastewater.

Fluorine-Free Fabrication of MXene via Photo-Fenton Approach for Advanced Lithium-Sulfur Batteries

The mainstream synthesis method for MXene is using aqueous fluorine-containing acidic solutions to eliminate the A-element layers from their MAX phases. However, this strategy is environmentally hazardous and impairs the material performance (e.g., supercapacitor and Li-S batteries) owing to the presence of -F terminations. Herein, we exploit a low-temperature "soft chemistry" approach based on photo-Fenton (P.F.) reaction for the fabrication of F-free Ti₃C₂ (Ff-Ti₃C₂) with high purity of 95%. It is confirmed that the continuous generation of highly reactive oxygen species (HO^• and O₂^•- radicals) during the P.F. reaction weakens the metallic Ti-Al bonds in the MAX phase and promotes the formation of high concentration OH^- anions, which are conducive to the sequential topochemical deintercalation of Al layers. Moreover, the strengthened charge accumulation on the Ff-Ti₃C₂ surface creates rich electron "reservoirs" for actuating the Li-S chemistry, which not only strengthens the host-guest interactions but also propels the kinetics of the polysulfide conversion. Taking advantage of the superior mechanical robustness, better electrolyte wettability, and improved electrocatalytic activity, the resultant Ff-Ti₃C₂ can be used as an ideal sulfur host and Li-S chemistry mediator for advanced flexible Li-S batteries.

Optofluidic Platform for Rapid On-Chip Analysis of Total Phosphorus in Surface Water Using Absorption Spectrometry

Optofluidic devices are of high interest for online monitoring and analyzing biochemical targets in water by integrating the complex on-chip pretreatment of target analytes and spectral analysis. Compared with the traditional bulk equipment, versatile optical detection and biochemical analysis are more easily integrated on an optofluidic chip, which promotes the development of on-chip real-time rapid detection and monitoring. Here, we report an optofluidic platform for online monitoring total phosphorous in water by absorption spectrometry, which naturally combines the merits of both the photo-Fenton effect and microfluidics to realize the rapid on-chip digestion of phosphate at room temperature and normal pressure. The functional cells for chromogenic reaction and optical absorption detection are, respectively, fabricated on the platform to analyze the content of total phosphorus in surface water. In the experiment, the on-chip digestion time of phosphate is dramatically declined to 8.6 sec, and thus, the detection time is greatly shortened to a few minutes. The detection range of total phosphorus is demonstrated as 0.005-1.00 mg L^-1, which satisfies the detection requirements of most environmental water samples. Its availability for measuring the total phosphorous in real water samples is also verified. Predictably, this platform is adapted to on-chip analysis of many other biochemical targets in water.

Food By-Product Valorization by Using Plant-Based Coagulants Combined with AOPs for Agro-Industrial Wastewater Treatment

Re-using and adding value to by-products is one of the current focuses of the agri-food industry, following the Sustainable Development Goals of United Nations. In this work, the by-products of four plants, namely chestnut burr, acorn peel, olive leaf, and grape stem were used as coagulants to treat elderberry wastewater (EW), a problematic liquid effluent. EW pre-treatment using these natural coagulants showed promising results after pH and coagulant dosage optimization. However, the decrease in total organic carbon (TOC) was not significant, due to the addition of the plant-based natural coagulants which contain carbon content. After this pre-treatment, the photo-Fenton advanced oxidation process was selected, after preliminary assays, to improve the global performance of the EW treatment. Photo-Fenton was also optimized for the parameters of pH, H₂O₂, Fe²⁺, and irradiance power, and the best conditions were applied to the EW treatment. Under the best operational conditions defined in the parametric study, the combined results of coagulation–flocculation–decantation (CFD) and photo-Fenton for chestnut burr, acorn peel, olive leaf, and grape stem were, respectively, 90.2, 89.5, 91.5, and 88.7% for TOC removal; 88.7, 82.0, 90.2 and 93.1%, respectively, for turbidity removal; and finally, 40.6, 42.2, 45.3, and 39.1%, respectively, for TSS removal. As a final remark, it is possible to suggest that plant-based coagulants, combined with photo-Fenton, can be a promising strategy for EW treatment that simultaneously enables valorization by adding value back to food by-products.

The Photocatalytic Performance of Nd2O3 Doped CuO Nanoparticles with Enhanced Methylene Blue Degradation: Synthesis, Characterization and Comparative Study

The growth of the textile industry results in a massive accumulation of dyes on water. This enormous rise in pigments is the primary source of water pollution, affecting the aquatic lives and our ecosystem balance. This study aims to notify the fabrication of neodymium incorporated copper oxide (Nd2O3 doped CuO) nanoparticles by combustion method for effective degradation of dye, methylene blue (MB). X-ray diffraction (XRD), Field emission Scanning electron microscopy (FESEM), Zeta potential have been applied for characterization. Photocatalyst validity has been evaluated for methylene blue degradation (MB). Test conditions such as time of contact, H2O2, pH, and photo-Fenton have been modified to identify optimal degradation conditions. Noticeably, 7.5% Nd2O3 doped CuO nanoparticle demonstrated the highest photocatalytic efficiency, up to 90.8% in 80 min, with a 0.0227 min-1 degradation rate. However, the photocatalytic efficiency at pH 10 becomes 99% with a rate constant of 0.082 min-1. Cyclic experiments showed the Nd2O3 doped CuO nanoparticle's stability over repeated use. Scavenge hydroxyl radical species responsible for degradation using 7.5% Nd2O3 doped CuO nanoparticles have been investigated under visible irradiation.

Synthesis, characterization, and application of α-Fe2 O3 @TiO2 @SO3 H photo-Fenton catalyst for photocatalytic degradation of biologically pre-treated wood industry wastewater

The efficiency of removing chemical oxygen demand (COD) and turbidity from wood wastewater was investigated using a sequencing batch reactor (SBR) and the photo-Fenton process. A total of 94.78% of COD reduction and 99.9% of turbidity removal were observed under optimum conditions of SBR, which consisted of an organic loading rate (OLR) of 0.453 kg COD m^-3  day^-1 , mixed liquor suspended solids (MLSS) of 4564 mg L^-1 , and cycle time of 48 h. A magnetic α-Fe₂ O₃ @TiO₂ @SO₃ H nanocatalyst was prepared as a heterogeneous Fenton reagent. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and elemental mapping (MAP) analyses were performed to determine the structure and morphology of synthesized photocatalyst. The response surface methodology (RSM) was used to optimize the process based on a central composite design (CCD). The maximum photocatalytic degradation of 87.54% and COD reduction of 83.35% were achieved at a dosage of 0.6 g L^-1 of catalyst, 30 mg L^-1 of H₂ O₂ , and pH of 3.5 for 45 min. The results indicated that a combination of the SBR process and α-Fe₂ O₃ @TiO₂ @SO₃ H could be used as an effective method for the treatment of wood wastewater. PRACTITIONER POINTS: A combination of the SBR and photo-Fenton process was introduced as an impressive method for wood industry wastewater treatment. The efficiencies of COD, BOD₅ , NO₃ -N, PO₄ -P, and color removal were obtained according to the standard limits in Iran. To our knowledge, this study is the first report of the use of synthesized α-Fe₂ O₃ @TiO₂ @SO₃ H photocatalyst for the wood industry wastewater treatment.

Three-Dimensional Hierarchical HRP-MIL-100(Fe)@TiO2@Fe3O4 Janus Magnetic Micromotor as a Smart Active Platform for Detection and Degradation of Hydroquinone

A novel multifunctional Janus magnetic micromotor was designed and constructed by using MIL-100(Fe)@TiO₂@Fe₃O₄ multicore-shells modified with horseradish peroxidase (HRP) as a smart active platform to realize detection and degradation of hydroquinone (HQ). The obtained micromotor showed a unique three-dimensional (3D) hierarchical architecture with highly exposed active sites and could autonomously move at a speed of 140 ± 7.0 μm·s^-1 by O₂ bubbles generated from the catalytic decomposition of H₂O₂ fuel. Benefiting from the combination of active self-propulsive motion, high peroxidase-like activity, tuned heterojunctions with matching band structures, and a 3D hierarchical structure, an effective platform involving dynamically sensitive detection and quick removal of HQ from water was established by using the multifunctional HRP-integrated MIL-100(Fe)@TiO₂@Fe₃O₄ Janus micromotor. The proposed multifunctional Janus magnetic micromotor had advantages of simple and feasible fabrication, sensitive detection and effective photo-Fenton degradation of HQ in a wide pH range of 4-7, and magnetic recycling, revealing potential for environmental remediation applications.

A review on pesticide degradation from irrigation water and techno-economic feasibility of treatment technologies

The present study focuses and assures the need for pesticide degradation from various water bodies used for irrigation and the available technologies to treat them effectively. A thorough review of the literature is done on pesticide residues present in various irrigation water sources like rivers, groundwater, river sediments, and soil which signifies the existence of pesticides in the ecosystem. This indicates the severity of water pollution due to various sources around and their adverse effect on the ecosystem. However, several technologies are available to treat these pesticides based on the classification. A Cross comparison between the technologies is done to determine the efficient technology for the treatment of irrigation water.

Photochemical mineralization of amoxicillin medicinal product by means of UV, hydrogen peroxide, titanium dioxide and iron

In the present study, the photochemical degradation of amoxicillin and total organic carbon (TOC) removal in pharmaceutical aqueous solutions was studied using UV irradiation, titanium dioxide, hydrogen peroxide and iron in a batch photoreactor operated for 120-150 min. The effect of the initial concentrations of the target compound, hydrogen peroxide and ferric ions and of their combination was examined. It was found that under direct UV photolysis, considerable TOC removals were obtained only when the initial concentration of amoxicillin (AM) was below 100 mg/L. For initial concentration of AM 250 mg/L, the TOC removals achieved were of no practical use (below 5%). The TOC removals achieved in the presence of TiO₂ were lower than 20% in all cases. In the presence of hydrogen peroxide in the range of 12.2-146.9 mmol/L and initial AM concentration 250 mg/L, for increasing H₂O₂ concentrations higher TOC removals were achieved up to the concentration of 73.4 mmol/L H₂O₂. The presence of even very small amounts of Fe(III) in the solution resulted in significantly increased TOC removals; 2.2 times higher than without Fe(III) after 120 min. Fe(III) presence accelerated dramatically the process during the first 60 min. The origin of Fe(III) ions was not important since practically the same results were obtained whether FeCl₃ or Fe(NO₃)₃ was used as source of ferric ions. Adjusting the initial concentrations of AM, Fe(III) and H₂O₂, TOC removals above 90% were achieved.

Synergetic adsorption and photo-Fenton degradation of methylene blue by ZnFe2O4/SiO2 magnetic double-mesoporous-shelled hollow spheres

Adsorption and Fenton technologies have been widely employed to deal with wastewater. ZnFe₂O₄/SiO₂ magnetic double-mesoporous-shelled hollow spheres (MDSHSs) were feasibly synthesized by a solvothermal method. The as-synthesized MDSHSs show excellent adsorption and selectivity for methylene blue (MB), which it took about only 1 min to reach the adsorption equilibrium. About 50% MB was removed by adsorption, and other 50% MB was degraded under further photo-Fenton process. Effects of experimental conditions on the adsorption and photo-Fenton process were investigated. The mechanisms of MDSHSs formation and photo-Fenton process were proposed. Total organic carbon (TOC) reduction reached as high as 90% with 60 mg/L of MB for 90 min. The experimental results indicated that MDSHSs exhibit a remarkable adsorption and catalytic activity for photo-Fenton process in a wide pH range of 3.3-11.0. Simultaneously, the composite shows an excellent stability and reusability.

Application of solar-based oxidation to the management of empty pesticide container rinse water in Bolivia

Background: The management of empty pesticide containers (EPC) in Bolivia has been recently promoted as a control strategy for dispersed pollution in surface and underground water bodies, as well as in soil. It comprises the rinsing and proper disposal or reuse of clean EPC. However, the rinsing transfers the hazard to water, which must be properly treated before being discharged. Methods: In this study, solar photo-Fenton at low Fe 2+ doses were tested at pilot plant scale in Cochabamba (Bolivia) for the removal of pesticides dimethoate and atrazine in their commercial form, spiked in river water. Results: The results demonstrated that solar photo-Fenton ([H 2O 2] 0 = 200 mg L -1) with Fe 2+ concentrations between 0.5 and 1.5 mg L -1 is an effective method to remove dimethoate and atrazine, at an initial concentration of 10 mg L -1 each. Efficiency increased when increasing Fe 2+ doses, achieving a removal over 99% of both pesticides after a solar irradiation period of 60 minutes (corresponding to an accumulated energy of 4.96 kJ L -1). Conclusions: The presence of high concentrations of natural components of river water, mainly organic and inorganic carbon species, would have contributed to hydroxyl radical scavenging, explaining, together with the low iron dose applied, the high energy (irradiation time) and high hydrogen peroxide concentration required to produce pesticide depletion. Additionally, the relatively low oxidant consumption and mineralization observed leave room for process optimization regarding oxidant and catalyst doses and warrant further studies on its coupling with biological or other post-treatments for the removal of transformation products.

Visible-Light-Responsive Nanofibrous α-Fe2O3 Integrated FeOx Cluster-Templated Siliceous Microsheets for Rapid Catalytic Phenol Removal and Enhanced Antibacterial Activity

Visible-light-driven environmental contaminants control using 2D photocatalytic nanomaterials with an unconfined reaction-diffusion path is advantageous for public health. Here, cost-effective siliceous composite microsheets (FeSiO-MS) combined with two distinct refined α-Fe₂O₃ nanospecies as photofunctional catalysts were constructed via a one-pot synthesis approach. Through precise control of Fe²⁺ precursor addition, specially configured α-Fe₂O₃ nanofibers combined with FeOx cluster-functionalized siliceous microsheets of ∼15 nm gradually evolved from the iron oxide-bearing molecular sieve, endowing a superior light-response characteristic of the formed nanocomposite. The catalytic experiment along with the ESR study demonstrated that the produced FeSiO-MS showed reinforced photo-Fenton reactivity, which was effective for rapid phenol degradation under visible light radiation. Moreover, the phenol removal process was found to be regulated by the specially configured types and concentrations of iron oxides. Notably, the obtained composites exhibited a considerable visible-light-induced bactericidal effect against E. coli. The constructed FeSiO-MS nanocomposites as integrated and eco-friendly photocatalysts exhibit enormous potentials for environmental and hygienic application.

Manufacturing and Application of 3D Printed Photo Fenton Reactors for Wastewater Treatment

Additive manufacturing (AM) or 3D printing offers a new paradigm for designing and developing chemical reactors, in particular, prototypes. The use of 3D printers has been increasing, their performance has been improving, and their price has been reducing. While the general trend is clear, particular applications need to be assessed for their practicality. This study develops and follows a systematic approach to the prototyping of Advanced Oxidation Processes (AOP) reactors. Specifically, this work evaluates and discusses different printable materials in terms of mechanical and chemical resistance to photo-Fenton reactants. Metallic and ceramic materials are shown to be impracticable due to their high printing cost. Polymeric and composite materials are sieved according to criteria such as biodegradability, chemical, thermal, and mechanical resistance. Finally, 3D-printed prototypes are produced and tested in terms of leakage and resistance to the photo-Fenton reacting environment. Polylactic acid (PLA) and wood-PLA composite (Timberfill^®) were selected, and lab-scale raceway pond reactors (RPR) were printed accordingly. They were next exposed to H2O2/Fe(II) solutions at pH = 3 ± 0.2 and UV radiation. After 48 h reaction tests, results revealed that the Timberfill^® reactor produced higher Total Organic Carbon (TOC) concentrations (9.6 mg·L^-1) than that obtained for the PLA reactor (5.5 mg·L^-1) and Pyrex^® reactor (5.2 mg·L^-1), which suggests the interference of Timberfill^® with the reaction. The work also considers and discusses further chemical and mechanical criteria that also favor PLA for 3D-printing Fenton and photo-Fenton reactors. Finally, the work also provides a detailed explanation of the printing parameters used and guidelines for preparing prototypes.

Enhanced Photocatalytic Activity of Spherical Nd3+ Substituted ZnFe2O4 Nanoparticles

In this study, nanocrystalline ZnNd_xFe_2−xO₄ ferrites with x = 0.0, 0.01, 0.03 and 0.05 were fabricated and used as a catalyst for dye removal potential. The effect of Nd³⁺ ions substitution on the structural, optical and photo-Fenton activity of ZnNd_xFe_2−xO₄ has been investigated. The addition of Nd³⁺ ions caused a decrease in the grain size of ferrites, the reduction of the optical bandgap energies and thus could be well exploited for the catalytic study. The photocatalytic activity of the ferrite samples was evaluated by the degradation of Rhodamine B (RhB) in the presence of H₂O₂ under visible light radiation. The results indicated that the ZnNd_xFe_2−xO₄ samples exhibited higher removal efficiencies than the pure ZnFe₂O₄ ferrites. The highest degradation efficiency was 98.00%, attained after 210 min using the ZnNd_0.03Fe_1.97O₄ sample. The enhanced photocatalytic activity of the ZnFe₂O₄ doped with Nd³⁺ is explained due to the efficient separation mechanism of photoinduced electron and holes. The effect of various factors (H₂O₂ oxidant concentration and catalyst loading) on the degradation of RhB dye was clarified.

Reusable Fe3O4/SBA15 Nanocomposite as an Efficient Photo-Fenton Catalyst for the Removal of Sulfamethoxazole and Orange II

Today, the presence of recalcitrant pollutants in wastewater, such as pharmaceuticals or other organic compounds, is one of the main obstacles to the widespread implementation of water reuse. In this context, the development of innovative processes for their removal becomes necessary to guarantee effluent quality. This work presents the potentiality of magnetic nanoparticles immobilized on SBA-15 mesoporous silica as Fenton and photo-Fenton catalysts under visible light irradiation. The influence of the characteristics of the compounds and nanoparticles on the removal yield was investigated. Once the key aspects of the reaction mechanism were analyzed, to evaluate the feasibility of this process, an azo dye (Orange II) and an antibiotic (sulfamethoxazole) were selected as main target compounds. The concentration of Orange II decreased below the detection limit after two hours of reaction, with mineralization values of 60%. In addition, repeated sequential experiments revealed the recoverability and stability of the nanoparticles in a small-scale reactor. The benchmarking of the obtained results showed a significant improvement of the process using visible light in terms of kinetic performance, comparing the results to the Fenton process conducted at dark. Reusability, yield and easy separation of the catalyst are its main advantages for the industrial application of this process.

Sulfaquinoxaline Oxidation and Toxicity Reduction by Photo-Fenton Process

Sulfaquinoxaline (SQX) has been detected in environmental water samples, where its side effects are still unknown. To the best of our knowledge, its oxidation by Fenton and photo-Fenton processes has not been previously reported. In this study, SQX oxidation, mineralization, and toxicity (Escherichia coli and Staphylococcus aureus bacteria) were evaluated at two different setups: laboratory bench (2 L) and pilot plant (15 L). The experimental design was used to assess the influence of the presence or absence of radiation source, as well as different H2O2 concentrations (94.1 to 261.9 mg L-1). The experimental conditions of both setups were: SQX = 25 mg L-1, Fe(II) = 10 mg L-1, pH 2.8 ± 0.1. Fenton and photo-Fenton were suitable for SQX oxidation and experiments resulted in higher SQX mineralization than reported in the literature. For both setups, the best process was the photo-Fenton (178.0 mg L-1 H2O2), for which over 90% of SQX was removed, over 50% mineralization, and bacterial growth inhibition less than 13%. In both set-ups, the presence or absence of radiation was equally important for sulfaquinoxaline oxidation; however, the degradation rates at the pilot plant were between two to four times higher than the obtained at the laboratory bench.

Changes of dissolved oxygen in aqueous solutions of caffeine oxidized by photo-Fenton reagent

ABSTRACT Formation of oxygen in the caffeine aqueous solutions occurs through self-decomposition reactions of the hydrogen peroxide, used as an oxidant in the photo-Fenton treatment. The total concentration of hydrogen peroxide used in the treatment would be the contribution of the stoichiometric concentration that reacts with the organic matter ([H₂O₂]₀= 2.0 mM) and the excess of oxidant that decomposes to oxygen, through radical mechanisms, according to a ratio of 0.8164 mmol H₂O₂ mg^-1 O₂. When operating at concentrations lower than [H₂O₂]₀= 2.0 mM, oxygen is not released because there is no excess of oxidant. Moreover, it is verified that the ferrous ion catalyst is oxidized to ferric ion and its subsequent regeneration to ferrous ion. Working at concentrations higher than [H₂O₂]₀= 2.0 mM, oxygen is released in the water, verifying that the catalyst remains as ferric species, which does not regenerate. The reaction time in which oxygen evolution happpens depends on the concentration of catalyst used in the oxidation, verifying that the highest oxygen generation rates are obtained when applying [Fe]₀= 10.0 mg L^-1. Once generated in the water, the maximum concentration of oxygen begins to decrease as the hydrogen peroxide is consumed, until reaching a constant value. The stages of formation and decrease of oxygen are adjusted to zero-order kinetics, estimating the kinetics constants as a function of the catalyst concentration: k _f= 29.48 [Fe]₀ ^-1.25 (mg O₂ L^-1 min^-1) and k _d= -0.006 [Fe]₀ ^2.0 + 0.244 [Fe]₀-3.69 (mg O₂ L^-1 min^-1).

Multi-Component Mesocrystalline Nanoparticles with Enhanced Photocatalytic Activity

Mesocrystals, consisting of small subunits, have gained research interests owing to their ability to simultaneously modify material-specific properties and interactions among subunits. However, despite these unique characteristics, most mesocrystals are composed of a single material, and there is a disjunction between academic discovery and practical application. In this study, the synthesis of multi-component mesocrystalline nanoparticles composed of Fe₃ O₄ , ZnFe₂ O₄ , and ZnO subunits using a polymerization induced heterogeneous nucleation method is reported. The structure has small ZnFe₂ O₄ and ZnO nanocrystals covering the Fe₃ O₄ crystallites. It exhibits not only magnetic and catalytic properties determined by the size of each subunit nanocrystal, but also enhances photocatalytic and colloidal properties that originates because of its crowded arrangement. The magnetically recoverable catalysts exhibit remarkable photodegradation of organic molecules under the irradiation of visible light for 1 h; thus, improving its applicability in purifying a large amount of wastewater during the daytime.

Synthesis of FePcS-PMA-LDH Cointercalation Composite with Enhanced Visible Light Photo-Fenton Catalytic Activity for BPA Degradation at Circumneutral pH

(1) Background: Iron tetrasulfophthalocyanine with a large nonlinear optical coefficient, good stability, and high catalytic activity has aroused the attention of researchers in the field of photo-Fenton reaction. Further improvement of the visible light photo-Fenton catalytic activity under circumneutral pH conditions for their practical application is still of great importance. (2) Methods: In this paper, iron tetrasulfophthalocyanine (FePcS) and phosphomolybdic acid (PMA) cointercalated layered double hydroxides (LDH) were synthesized by the ion-exchange method. All samples were fully characterized by various techniques and the results showed that FePcS and PMA were successfully intercalated in layered double hydroxides and the resulted compound exhibited strong absorption in the visible light region. The cointercalation compound was tested as a heterogeneous catalyst for the visible light photo-Fenton degradation of bisphenol A (BPA) at circumneutral pH. (3) Results: The results showed that the degradation and total organic carbon removal efficiencies of bisphenol A were 100% and 69.2%, respectively. (4) Conclusions: The cyclic voltammetry and electrochemical impedance spectroscopy measurements demonstrated that the main contribution of PMA to the enhanced photo-Fenton activity of FePcS–PMA–LDH comes from the acceleration of electron transfer in the reaction system. Additionally, the possible reaction mechanism in the photo-Fenton system catalyzed by FePcS–PMA–LDH was also proposed.

Combined AOPs for Formaldehyde Degradation Using Heterogeneous Nanostructured Catalysts

In this paper we studied the combination of advanced oxidation processes (AOPs), i.e., TiO₂-based photocatalysis and photo-Fenton process, on the degradation of aqueous solutions containing a low (90 ppm) concentration of formaldehyde. Heterogeneous nanostructured catalysts, supported on polymeric nanofibers, were used; for comparison, some homogeneous or partly heterogeneous systems were also analyzed. Furthermore, to make the process more sustainable (in terms of costs and safety) no hydrogen peroxide was added to the system. The results showed that the combination of AOPs gave a synergy since the presence of iron was beneficial in promoting the photocatalytic activity of TiO₂ while TiO₂ was beneficial in promoting the photo-Fenton reaction. Moreover, very good results were obtained using fully heterogeneous nanostructured catalysts (based on TiO₂ and FeSO₄), without the need to add H₂O₂.

Carbamazepine Degradation Mediated by Light in the Presence of Humic Substances-Coated Magnetite Nanoparticles

The use of iron-based nanomaterials for environmental remediation processes has recently received considerable attention. Here, we employed core-shell magnetite-humic acids nanoparticles as a heterogeneous photosensitizer and iron source in photo-Fenton reaction for the degradation of the psychiatric drug carbamazepine (CBZ). CBZ showed low photodegradation rates in the presence of the magnetic nanoparticles, whereas the addition of hydrogen peroxide at pH = 3 to the system drastically increased the abatement of the contaminant. The measured Fe²⁺ and Fe³⁺ profiles point to the generation of Fe³⁺ at the surface of the nanoparticles, indicating a heterogeneous oxidation of the contaminant mediated by hydroxyl radicals. Products with a higher transformation degree were observed in the photo-Fenton procedure and support the attack of the HO^• radical on the CBZ molecule. Promising results encourage the use of the nanoparticles as efficient iron sources with enhanced magnet-sensitive properties, suitable for applications in photo-Fenton treatments for the purification of wastewater.

Nanofiltration Membranes with Metal Cation-Immobilized Aminophosphonate Networks for Efficient Heavy Metal Ion Removal and Organic Dye Degradation

Modifications to the surface of polymeric membranes to integrate supplemental properties like surface charge or catalytic activity are the cornerstone of the membrane process advancement to effectuate improvements in functionality and selectivity. Herein, a new approach is demonstrated to construct nanofiltration membranes with a metal-organic coordinated selective layer. Polyethylenimine (PEI) was integrated with phosphite linkages to form a characteristic aminophosphonate ester polymer based on the Kabachnik-Fields reaction, and a thin polymer layer was deposited on an ultrafiltration (UF) membrane to form the aminophosphonate networks surface-modified membranes. The aminophosphonate polymer interlayer facilitated the immobilization of metal cation moieties through the strong coordinative chemical bonding with the amino groups and phosphite moieties. Typically, the incorporated Fe³⁺ strengthened the membranes' electropositivity leading to excellent heavy metal ion removal (>98%) and efficient organic dye separation (>99.8%). Meanwhile, the strategy also enabled the embedment of a photocatalytic layer comprising nanoneedle-like α-FeOOH that endowed the membrane with high photo-Fenton activity for organic dye mineralization. Subsequently, the α-FeOOH-embedded membrane afforded the photocatalytic self-cleaning potentiality for organic fouling mitigation. This contribution underscores the prospect of advancing the integration of metal-specific functionalities and the membrane process for advanced membrane technologies in water treatment.

Photo-Fenton Degradation of Pentachlorophenol: Competition between Additives and Photolysis

In the present work, the photo-Fenton degradation of pentachlorophenol (PCP, 1 mg/L) has been studied under simulated and natural solar irradiation; moreover, the effect on the process efficiency of urban waste-derived soluble bio-based substances (SBO), structurally comparable to humic acids, has been investigated. Experiments showed a crucial role of PCP photolysis, present in the solar pilot plant and hindered by the Pyrex^® filter present in the solar simulator. Indeed, the SBO screen negatively affects PCP degradation when working under natural solar light, where the photolysis of PCP is relevant. In contrast, in the absence of PCP photolysis, a significant improvement of the photo-Fenton process was observed when added to SBO. Furthermore, SBO were able to extend the application of the photo-Fenton process at circumneutral pH values, due to their ability to complex iron, avoiding its precipitation as oxides or hydroxides. This positive effect has been observed at higher concentration of Fe(II) (4 mg/L), whereas at 1 mg/L, the degradation rates of PCP were comparable in the presence and absence of SBO.

2D In-Plane CuS/Bi2WO6 p-n Heterostructures with Promoted Visible-Light-Driven Photo-Fenton Degradation Performance

Photo-Fenton degradation of pollutants in wastewater is an ideal choice for large scale practical applications. Herein, two-dimensional (2D) in-plane CuS/Bi₂WO₆ p-n heterostructures have been successfully constructed by an in situ assembly strategy and characterized using XRD, XPS, SEM/TEM, EDX, UV-Vis-DRS, PL, TR-PL, ESR, and VB-XPS techniques. The XPS and the TEM results confirm the formation of CuS/Bi₂WO₆ heterostructures. The as-constructed CuS/Bi₂WO₆ showed excellent absorption in visible region and superior charge carrier separation efficiency due to the formation of a type-II heterojunctions. Under visible light irradiation, 0.1% CuS/Bi₂WO₆ heterostructure exhibited the best photo-Fenton-like catalytic performance. The degradation efficiency of Rhodamine B (RhB, 20 mg·L⁻¹) can reach nearly 100% within 25 min, the apparent rate constant (k_app/min⁻¹) is approximately 40.06 and 3.87 times higher than that of pure CuS and Bi₂WO₆, respectively. The degradation efficiency of tetracycline hydrochloride (TC-HCl, 40mg·L⁻¹) can reach 73% in 50 min by employing 0.1% CuS/Bi₂WO₆ heterostructure as a photo-Fenton-like catalyst. The promoted photo-Fenton catalytic activity of CuS/Bi₂WO₆ p-n heterostructures is partly ascribed to its low carriers recombination rate. Importantly, CuS in CuS/Bi₂WO₆ heterostructures is conducive to the formation of heterogeneous photo-Fenton catalytic system, in which Bi₂WO₆ provides a strong reaction site for CuS to avoid the loss of Cu²⁺ in Fenton reaction, resulting in its excellent stability and reusability. The possible photo-Fenton-like catalytic degradation mechanism of RhB and TC-HCl was also elucidated on the basis of energy band structure analysis and radical scavenger experiments. The present study provides strong evidence for CuS/Bi₂WO₆ heterostructures to be used as promising candidates for photo-Fenton treatment of organic pollutants.

Ag/AgCl/MIL-101(Fe) Catalyzed Degradation of Methylene Blue under Visible Light Irradation

A novel photo-Fenton catalyst named Ag/AgCl/MIL-101(Fe) was synthesized by the method of precipitation and photo reduction and characterized by X-ray diffraction patterns (XRD), Brunauer-Emmett-Teller (BET) measurements, Fourier transform infrared spectra (FTIR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectra. Moreover, the catalytic activity of the synthesized catalyst was tested using methylene blue (MB) as the target pollutant. The obtained results illustrated that the plasmonic material Ag/AgCl was successfully loaded on MIL-101(Fe) and the obtained catalyst exhibited an excellent catalytic activity under visible light at the neutral pH. According to the analyses of Plackett-Burman and Box-Behnken design, the optimum conditions for MB degradation were obtained. Under these conditions, the MB decolorization and mineralization efficiencies could reach to 99.75% and 65.43%, respectively. The recycling experiments also showed that the as-prepared catalyst displayed good reusability. In addition, the possible reaction mechanisms for the heterogeneous photo-Fenton system catalyzed by Ag/AgCl/MIL-101(Fe) were derived. The synthesized catalyst provides a promising approach to degrade organic pollutants in waste water.

Photo-Fenton reaction at mildly acidic conditions: assessing the effect of bio-organic substances of different origin and characteristics through experimental design

Urban-waste bio-organic substances (UW-BOS) have been shown to be capable of extending the photo-Fenton reaction to mildly acidic conditions. In this study, the effects of pH (3-7), UW-BOS, H₂O₂ and iron concentrations on the photo-Fenton process were systematically assessed using a Doehlert experimental design and response surface methodology for two UW-BOS (CVT230 and FORSUD). Solutions of the model antibiotic sulfadiazine (SDZ) were irradiated in a solar simulator equipped with a 550 W Xenon lamp. The results showed that for UW-BOS contents below 30 mg L^-1, SDZ removal proceeds at pH 5 with similar rates for both CVT230 and FORSUD, regardless of Fe(III) concentration. For 50 mg L^-1 of UW-BOS or higher, CVT230 performs better than FORSUD, even for low Fe(III) content (1-3 mg L^-1). In contrast, half-life times of 35-40 min can only be achieved under mildly acidic conditions with FORSUD for iron concentrations higher than 10 mg L^-1. The better performance of CVT230 can be associated with its high hydrophilic/hydrophobic ratio, low E2:E3, higher iron content and possibly higher yields of triplet reactive species generation upon solar irradiation. The most appropriate conditions for each UW-BOS studied are discussed for the first time, which are advantageous for possible engineered applications.

Removal of Paracetamol Using Effective Advanced Oxidation Processes

Fenton, photo-Fenton, and photo-induced oxidation, were investigated and compared for the treatment of 0.26 mmol L^-1 of paracetamol (PCT) in a deionised water matrix, during a reaction span of 120.0 min. Low and high Fenton reagent loads were studied. Particularly, the initial concentration of Fe²⁺ was varied between 0.09 and 0.18 mmol L^-1 while the initial concentration of H₂O₂ was varied between 2.78 and 11.12 mmol L^-1. The quantitative performance of these treatments was evaluated by: (i) measuring PCT concentration; (ii) measuring and modelling TOC conversion, as a means characterizing sample mineralization; and (iii) measuring cytotoxicity to assess the safe application of each treatment. In all cases, organic matter mineralization was always partial, but PCT concentration fell below the detection limit within 2.5 and 20.0 min. The adopted semi-empirical model revealed that photo induced oxidation is the only treatment attaining total organic matter mineralization ( ξ MAX = 100% in 200.0 min) at the expense of the lowest kinetic constant (k = 0.007 min^-1). Conversely, photo-Fenton treatment using high Fenton reagent loads gave a compromise solution ( ξ MAX = 73% and k = 0.032 min^-1). Finally, cytotoxicity assays proved the safe application of photo-induced oxidation and of photo-Fenton treatments using high concentrations of Fenton reagents.

Residue-based iron oxide catalyst for the degradation of simulated petrochemical wastewater via heterogeneous photo-Fenton process

Iron oxide with a high degree of purity was recovered from waste and used as an environmentally friendly, low-cost catalyst in the application of the photo-Fenton process to simulated petrochemical wastewater (SPW). Iron oxide nanoparticles were characterized by X-ray powder diffraction, transmission electron microscopy, N₂ adsorption/desorption isotherms, zeta potential, toxicity and atomic absorption spectrometry. The experiments were performed in a batch photochemical reactor, at 20 ± 2.0°C and pH 3.0. The SPW was efficiently mineralized and oxidized using a low catalyst dosage. The results showed that the organic compounds present in the wastewater were not adsorbed onto the solid surface. The solid was found to be stable with negligible leaching and low toxicity. The k_TOC/k_COD ratios were calculated and varied according to the process: for a homogeneous reaction, the ratio obtained was 0.31 and for the heterogenous photo-Fenton process, it was closer to 1. The chemical oxygen demand and total organic carbon removal values were very close, indicating that the SPW is immediately mineralized, without producing partially oxidized compounds. The residue-based goethite studied represents a good alternative to commercially available catalysts in terms of sources and availability.

Comparison of photo-Fenton, O3/H2O2/UV and photocatalytic processes for the treatment of gray water

This research was carried out to compare and optimize the gray water treatment performance by the photo-Fenton, photocatalysis and ozone/H₂O₂/UV processes. Experimental design and optimization were carried out using Central Composite Design of Response Surface Methodology. The results of experiments showed that the most effective and influencing factors in photo-Fenton process were H₂O₂/Fe²⁺ ratio, in ozone/H₂O₂/UV experiment were O₃ concentration, H₂O₂ concentration, reaction time and pH and in photocatalytic process were TiO₂ concentration, pH and reaction time. The highest COD removal in photo-Fenton, ozone/H₂O₂/UV and photocatalytic process were 90%, 92% and 55%, respectively. The results were analyzed by design expert software and for all three processes second-order models were proposed to simulate the COD removal efficiency. In conclusion the ozone/H₂O₂/UV process is recommended for the treatment of gray water, since it was able to remove both COD and turbidity by 92% and 93%, respectively.

Study on degrading graphene oxide in wastewater under different conditions for developing an efficient and economical degradation method

With popular application of graphene and graphene oxide (GO), they have been discharged into water. Graphene and GO harm organisms. However, an efficient and economical method for removing graphene and GO in wastewater has seldom been reported. Graphene can be oxidized by hydrogen peroxide to give GO; therefore, degradation of graphene oxide is an important step in the procedure of removal of graphene from water. In this paper, GO degradation via photo-Fenton reaction under different conditions was carried out. Experimental results suggested that GO in wastewater can be efficiently and economically degraded into carbon dioxide and H₂O when pH value is 3, concentration of H₂O₂ and FeCl₃ are 35 mM and 5 ppm, respectively. Degradation mechanism of GO was suggested based on UV-vis absorption spectra, scanning electron microscopy, X-ray diffraction and liquid chromatography-mass spectra data of degradation intermediates. This paper suggests an efficient and economical degradation way of GO in wastewater.

Light-Assisted Advanced Oxidation Processes for the Elimination of Chemical and Microbiological Pollution of Wastewaters in Developed and Developing Countries

In this work, the issue of hospital and urban wastewater treatment is studied in two different contexts, in Switzerland and in developing countries (Ivory Coast and Colombia). For this purpose, the treatment of municipal wastewater effluents is studied, simulating the developed countries’ context, while cheap and sustainable solutions are proposed for the developing countries, to form a barrier between effluents and receiving water bodies. In order to propose proper methods for each case, the characteristics of the matrices and the targets are described here in detail. In both contexts, the use of Advanced Oxidation Processes (AOPs) is implemented, focusing on UV-based and solar-supported ones, in the respective target areas. A list of emerging contaminants and bacteria are firstly studied to provide operational and engineering details on their removal by AOPs. Fundamental mechanistic insights are also provided on the degradation of the effluent wastewater organic matter. The use of viruses and yeasts as potential model pathogens is also accounted for, treated by the photo-Fenton process. In addition, two pharmaceutically active compound (PhAC) models of hospital and/or industrial origin are studied in wastewater and urine, treated by all accounted AOPs, as a proposed method to effectively control concentrated point-source pollution from hospital wastewaters. Their elimination was modeled and the degradation pathway was elucidated by the use of state-of-the-art analytical techniques. In conclusion, the use of light-supported AOPs was proven to be effective in degrading the respective target and further insights were provided by each application, which could facilitate their divulgation and potential application in the field.