Advanced microplastic monitoring using Raman spectroscopy with a combination of nanostructure-based substrates

Effects of Gamma Irradiation on Polyethylene Terephthalate and Detection of Microplastic Particles Down to 1 μm

In response to increasing concern about the impact of plastic degradation on the environment, this study investigates the degradation of virgin and recycled polyethylene terephthalate (PET) under γ-irradiation in aqueous solutions, with particular focus on the resulting formation of microplastic particles (MP). By exposing both virgin and recycled PET samples to different doses of γ-irradiation (10, 50, and 100 kGy), a comprehensive analysis using UV-vis spectroscopy, dynamic light scattering (DLS) and micro-Raman spectroscopy is presented. The results, highlighted by micro-Raman spectroscopy, show that γ-irradiation produces micrometer-sized plastic particles, with the recycled PET having a significantly higher MP content than its original counterpart. Careful examination reveals the presence of a stabilizer in samples of recycled PET juice bottles. This study not only contributes to our understanding of the effects of γ-irradiation on PET but also highlights the need for further research into the environmental impact of such processes. The insights gained shed light on the behavior of PET under γ-irradiation and the resulting impact on microplastic pollution and make an important contribution to our understanding of the broader environmental context.

Microfluidic Detection and Analysis of Microplastics Using Surface Nanodroplets

Detection of microplastics from water is crucial for various reasons, such as food safety monitoring, monitoring of the fate and transport of microplastics, and development of preventive measures for their occurrence. Currently, microplastics are detected by isolating them using filtration, separation by centrifugation, or membrane filtration, subsequently followed by analysis using well-established analytical methods, such as Raman spectroscopy. However, due to their variability in shape, color, size, and density, isolation using the conventional methods mentioned above is cumbersome and time-consuming. In this work, we show a surface-nanodroplet-decorated microfluidic device for isolation and analysis of small microplastics (diameter of 10 μm) from water. Surface nanodroplets are able to capture nearby microplastics as water flows through the microfluidic device. Using a model microplastic solution, we show that microplastics of various sizes and types can be captured and visualized by using optical and fluorescence microscopy. More importantly, as the surface nanodroplets are pinned on the microfluidic channel, the captured microplastics can also be analyzed using a Raman spectroscope, which enables both physical (i.e., size and shape) and chemical (i.e., type) characterization of microplastics at a single-particle level. The technique shown here can be used as a simple, fast, and economical detection method for small microplastics.

Suspected sources of microplastics and nanoplastics: Contamination from experimental reagents and solvents

There is an increasing concern about the potential effects of microplastics (MPs) and nanoplastics on human health and other organisms. For the separation and detection of MPs, there are various approaches, and the distinct procedures led to different results. However, the presence of MPs in the reagents was not addressed, which could cause false and/or inaccurate results during MPs detection. In this study, the chemical reagents commonly used for the separation and detection of MPs were selected to ascertain whether these reagents introduce MPs. It was shown that a large number of MPs were detected in the reagent and solvent samples. The largest number of MPs (>1 μm) was detected in the KOH reagent, with the abundance of 3070 items/g. The order of MPs abundance in the selected reagents was: KOH > NaCl > CaCl2 > SDS > NaI > H2O2. The types of MPs were the same as the body and stopper of the reagent packaging bottles. MPs size detected in reagent bottles was primarily smaller than 10 μm. The abundance of MPs in the reagents were independent of their purity, however, there was a certain difference in MPs abundance in reagents from different manufacturers. Furthermore, the presence of nanoplastics (< 1 μm) was verified in the reagents through Py-GCMS, with the abundance (39.47-43.01 mg/kg) higher than that of MPs. The obtained results in this study raised specific requirements and cautions for MPs and nanoplastics related research in terms of quality control. Also, this work can facilitate a more accurate assessment of MPs concentrations in the environment.

A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives

The global environmental concern surrounding microplastic (MP) pollution has raised alarms due to its potential health risks to animals, plants, and humans. Because of the complex structure and composition of microplastics (MPs), the detection methods are limited, resulting in restricted detection accuracy. Surface enhancement of Raman spectroscopy (SERS), a spectral technique, offers several advantages, such as high resolution and low detection limit. It has the potential to be extensively employed for sensitive detection and high-resolution imaging of microplastics. We have summarized the research conducted in recent years on the detection of microplastics using Raman and SERS. Here, we have reviewed qualitative and quantitative analyses of microplastics and their derivatives, as well as the latest progress, challenges, and potential applications.

Microplastics in water: types, detection, and removal strategies

Microplastics are one of the most concerning groups of contaminants that pollute most of the surroundings of the Earth. The abundance of plastic materials available in the environment moved the scientific community in defining a new historical era known as Plasticene. Regardless of their minuscule size, microplastics have posed severe threats to the life forms like animals, plants, and other species present in the ecosystem. Ingestion of microplastics could lead to harmful health effects like teratogenic and mutagenic abnormalities. The source of microplastics could be either primary or secondary in which the components of microplastics are directly released into the atmosphere and the breakdown of larger units to generate the smaller molecules. Though numerous physical and chemical techniques are reported for the removal of microplastics, their increased cost prevents the large-scale applicability of the process. Coagulation, flocculation, sedimentation, and ultrafiltration are some of the methods used for the removal of microplastics. Certain species of microalgae are known to remove microplastics by their inherent nature. One of the biological treatment strategies for microplastic removal is the activated sludge strategy that is used for the separation of microplastic. The overall microplastic removal efficiency is significantly high compared to conventional techniques. Thus, the reported biological avenues like the bio-flocculant for microplastic removal are discussed in this review article.

Microfluidic systems for particle capture and release: A review

Microfluidic technology has emerged as a promising tool in various applications, including biosensing, disease diagnosis, and environmental monitoring. One of the notable features of microfluidic devices is their ability to selectively capture and release specific cells, biomolecules, bacteria, and particles. Compared to traditional bulk analysis instruments, microfluidic capture-and-release platforms offer several advantages, such as contactless operation, label-free detection, high accuracy, good sensitivity, and minimal reagent requirements. However, despite significant efforts dedicated to developing innovative capture mechanisms in the past, the release and recovery efficiency of trapped particles have often been overlooked. Many previous studies have focused primarily on particle capture techniques and their efficiency, disregarding the crucial role of successful particle release for subsequent analysis. In reality, the ability to effectively release trapped particles is particularly essential to ensure ongoing, high-throughput analysis. To address this gap, this review aims to highlight the importance of both capture and release mechanisms in microfluidic systems and assess their effectiveness. The methods are classified into two categories: those based on physical principles and those using biochemical approaches. Furthermore, the review offers a comprehensive summary of recent applications of microfluidic platforms specifically designed for particle capture and release. It outlines the designs and performance of these devices, highlighting their advantages and limitations in various target applications and purposes. Finally, the review concludes with discussions on the current challenges faced in the field and presents potential future directions.

Subppb level monitoring and UV degradation of triclosan pollutants using ZnO multipod and Ag nanocomposites

A unique nanomaterial platform was developed for trace detection and efficient degradation of triclosan (TCS). A facile spectroscopic technique for surface-enhanced Raman scattering (SERS)-supported identification and ultraviolet (UV) degradation of TCS using a SERS template based on silver spherical nanoparticle (AgNP)-modified ZnO multipods (ZnO@Ag) is reported. Core-shell composite materials of ZnO multipods with a dimension of around 3 μm and AgNPs with an average diameter of ∼27 nm was designed not only as a substrate for TCS degradation up to ∼92% upon UV irradiation (λ = 365 mm, 300 μW/cm²) but also as a monitoring platform sensitive to TCS at a detection limit as low as 10^-9 M (≈0.3 ppb). Herein, the first investigation into ZnO@Ag bimetallic composites is established for both the SERS-based detection and UV-assisted degradation of environmental TCS pollutants. The calibration curve was estimated to be linear at R² > 0.97. The validated technology was successfully used to determine the antibacterial agent and TCS in distilled or river water. The advantages of the ZnO@Ag template are highlighted over conventional detection and excellent degradation.

Microfluidics as a Ray of Hope for Microplastic Pollution

Microplastic (MP) pollution is rising at an alarming rate, imposing overwhelming problems for the ecosystem. The impact of MPs on life and environmental cycles has already reached a point of no return; yet global awareness of this issue and regulations regarding MP exposure could change this situation in favor of human health. Detection and separation methods for different MPs need to be deployed to achieve the goal of reversing the effect of MPs. Microfluidics is a well-established technology that enables to manipulate samples in microliter volumes in an unprecedented manner. Owing to its low cost, ease of operation, and high efficiency, microfluidics holds immense potential to tackle unmet challenges in MP. In this review, conventional MP detection and separation technologies are comprehensively reviewed, along with state-of-the-art examples of microfluidic platforms. In addition, we herein denote an insight into future directions for microfluidics and how this technology would provide a more efficient solution to potentially eradicate MP pollution.