Evaluation of the cytotoxicity of contemporary glass-ionomer cements on mouse fibroblasts and human dental pulp cells

Current trends and research advances on the application of TiO2 nanoparticles in dentistry: How far are we from clinical translation?

The great potential of nanotechnology-based knowledge during the past decade has shown great potential to elevate human living standards and enhance healthcare conditions through diagnosing, preventing, and treating different diseases. Among abundant nanoparticles (NPs), inorganic NPs feature distinctive biological and physicochemical properties compared to their conventional counterparts which do not endow. TiO2 NPs possess excellent properties including low-cast, antibacterial properties, biocompatibility, and physicochemical stability. The present review highlights and discusses the current trends in applying TiO2 NPs in dentistry ranging from TiO2-based nanocomposite in endodontics, orthodontics, and biofilm prevention. Moreover, the potential of TiO2 NPs in developing new photodynamic therapy and the next generation of oral care products is outlined. In the end, the clinical translation of TiO2-based dental materials is brought to the forefront which is impetus and of great importance to developing inorganic NP-based dental materials.

Evaluation of setting kinetics, mechanical strength, ion release, and cytotoxicity of high-strength glass ionomer cement contained elastomeric micelles

BACKGROUND

Low mechanical properties are the main limitation of glass ionomer cements (GICs). The incorporation of elastomeric micelles is expected to enhance the strength of GICs without detrimentally affecting their physical properties and biocompatibility. This study compared the chemical and mechanical properties, as well as the cytotoxicity, of elastomeric micelles-containing glass ionomer cement (DeltaFil, DT) with commonly used materials, including EQUIA Forte Fil (EF), Fuji IX GP Extra (F9), and Ketac Molar (KT).

METHOD

Powder particles of GICs were examined with SEM-EDX. Setting kinetics were assessed using ATR-FTIR. Biaxial flexural strength/modulus and Vickers surface microhardness were measured after immersion in water for 24 h and 4 weeks. The release of F, Al, Sr, and P in water over 8 weeks was analyzed using a fluoride-specific electrode and ICP-OES. The toxicity of the material extract on mouse fibroblasts was also evaluated.

RESULTS

High fluoride levels in the powder were detected with EF and F9. DT demonstrated an initial delay followed by a faster acid reaction compared to other cements, suggesting an improved snap set. DT also exhibited superior flexural strength than other materials at both 24 h and 4 weeks but lower surface microhardness (p < 0.05). EF and F9 showed higher release of F, Al, and P than DT and KT. There was no statistically significant difference in fibroblast viability among the tested materials (p > 0.05).

CONCLUSIONS

Elastomeric micelles-containing glass ionomer cement (DT) exhibited satisfactory mechanical properties and cytocompatibility compared with other materials. DT could, therefore, potentially be considered an alternative high-strength GIC for load-bearing restorations.

Cell viability assessment and ion release profiles of GICs modified with TiO2- and Mg-doped hydroxyapatite nanoparticles

OBJECTIVES

To assess and compare the cell viability and ion release profiles of two conventional glass ionomer cements (GICs), Fuji IX and Ketac Molar EasyMix, modified with TiO2 and Mg-doped-HAp nanoparticles (NPs).

METHODS

TiO2 NPs, synthesized via a sol-gel method, and Mg-doped hydroxyapatite, synthesized via a hydrothermal process, were incorporated into GICs at a concentration of 5 wt.%. The biocompatibility of prepared materials was assessed by evaluating their effects on the viability of dental pulp stem cells (DPSCs), together with monitoring ion release profiles. Statistical analysis was performed using One-way analysis of variance, with significance level p < 0.05.

RESULTS

The addition of NPs did not significantly affect the biocompatibility of GICs, as evidenced by comparable decreased levels in cell viability to their original formulations. Distinct variations in cell viability were observed among Fuji IX and Ketac Molar, including their respective modifications. FUJI IX and its modification with TiO2 exhibited moderate decrease in cell viability, while other groups exhibited severe negative effects. While slight differences in ion release profiles were observed among the groups, significant variations compared to original cements were not achieved. Fluoride release exhibited an initial "burst release" within the initial 24 h in all samples, stabilizing over subsequent days.

CONCLUSIONS

The addition of NPs did not compromise biocompatibility, nor anticariogenic potential of tested GICs. However, observed differences among FUJI IX and Ketac Molar, including their respective modifications, as well as induced low viability of DPSC by all tested groups, suggest the need for careful consideration of cement composition in their biological assessments.

CLINICAL SIGNIFICANCE

The findings contribute to understanding the complex interaction between NPs and GIC matrices. However, the results should be interpreted recognizing the inherent limitations associated with in vitro studies. Further research avenues could explore long-term effects, in vivo performance, and potential clinical applications.

In-vitro-cytotoxicity of self-adhesive dental restorative materials

OBJECTIVES

Although the introduction of self-adhesive composites in restorative dentistry is very promising, the innovation of new materials also presents challenges and unknowns. Therefore, the aim of this study was to investigate the cytotoxicity of four different self-adhesive composites (SAC) in vitro and to compare them with resin-modified glass ionomer cements (RM-GIC), a more established group of materials.

METHODS

Samples of the following materials were prepared according to ISO 7405/10993-12 and eluted in cell culture medium for 24 h at 37 °C: Vertise Flow, Fusio Liquid Dentin, Constic, Surefil One, Photac Fil and Fuji II LC. Primary human pulp cells were obtained from extracted wisdom teeth and cultured for 24 h with the extracts in serial dilutions. Cell viability was evaluated by MTT assay, membrane disruption was quantified by LDH assay and apoptosis was assessed by flow cytometry after annexin/PI staining.

RESULTS

Two SAC (Constic and Vertise Flow) and one RM-GIC (Photac Fil) significantly reduced cell viability by more than 30% compared to the untreated control (p < 0.001). Disruptive cell morphological changes were observed and the cells showed signs of late apoptosis and necrosis in flow cytometry. Membrane disruption was not observed with any of the investigated materials.

CONCLUSION

Toxic effects occurred independently of the substance group and need to be considered in the development of materials with regard to clinical implications.

CLINICAL SIGNIFICANCE

SAC have many beneficial qualities, however, the cytotoxic effects of certain products should be considered when applied in close proximity to the dental pulp, as is often required.

A randomized controlled clinical trial of premixed calcium silicate-based cements for pulpotomy in primary molars

OBJECTIVES

This study aimed to verify the non-inferiority of Endocem MTA Premixed and Well-Root PT, compared with ProRoot MTA in the pulpotomy of primary molars. In addition, we tried to determine the factors that affect the prognosis of pulpotomy in primary molars.

METHODS

This randomized clinical trial enrolled 158 molars of 52 children; 153 teeth were finally included and divided into three groups: ProRoot MTA (n = 50), Endocem MTA Premixed (n = 53), and Well-Root PT (n = 50). Clinical and radiographic follow-up was performed at 3, 6, and 12 months postoperatively and at the last visit post-treatment. Data were analyzed using the Fisher's exact test, Cox regression analysis, and the Kaplan-Meier survival curve method.

RESULTS

The success rates in the ProRoot MTA, Endocem MTA Premixed, and Well-Root PT were 92, 84.9 and 82%, respectively. The cumulative survival rates did not differ significantly among the materials. Among the investigated variables, only ΔF and ΔF max significantly affected the success rates. In the multivariate survival tree model, significant unfavorable survival was observed when the ΔF value was -14.4 or less (hazard ratio, 7.56; P = 0.0295).

CONCLUSIONS

Considering the clinical effectiveness of Endocem MTA Premixed and Well-Root PT and the operational convenience as a premixed type, they can be used as advantageous materials in the pulpotomy of primary molars in pediatric patients. The QLF method is a useful diagnostic method that can establish treatment plans and determine the prognosis of pulpotomy based on the ΔF value in primary molars.

CLINICAL SIGNIFICANCE

Endocem MTA Premixed and Well-Root PT can confer high success rates and are non-inferior to ProRoot MTA in pulpotomy for primary molars. We also showed that QLF technology can be applied to predict the success/failure and prognosis of pulpotomies in primary molars.

Toxicity of resin-matrix cements in contact with fibroblast or mesenchymal cells

The main aim of this study was to perform an integrative review on the toxic effects of resin-matrix cements and their products in contact with fibroblasts or mesenchymal cells. A bibliographic search was performed on PubMed using the following search terms: "cytotoxicity" AND "fibroblast" OR "epithelial" OR "mesenchymal" AND "polymerization" OR "degree of conversion" OR "methacrylate" OR "monomer" AND "resin cement" OR "resin-based cement". The initial search in the available database yielded a total of 277 articles of which 21 articles were included in this review. A decrease in the viability of mouse fibroblasts ranged between 13 and 15% that was recorded for different resin-matrix cements after light curing exposure for 20 s. The viability of human fibroblasts was recorded at 83.11% after light curing for 20 s that increased up to 90.9% after light curing exposure for 40 s. Most of the studies linked the highest toxicity levels when the cells were in contact with Bis-GMA followed by UDMA, TEGDMA and HEMA. Resin-matrix cements cause a cytotoxic reaction when in contact with fibroblasts or mesenchymal cells due to the release of monomers from the polymeric matrix. The amount of monomers released from the resin matrix and their cytotoxicity depends on the polymerization parameters.

Effect of Potassium Aluminum Sulfate Application on the Viability of Fibroblasts on a CAD-CAM Feldspathic Ceramic before and after Thermocycling

Potassium aluminum sulfate (alum) is a known adjuvant, which has been used as a mordant in textile industry for color fixation. This material has potential to be incorporated into dentistry for color stability, yet its toxicity first needs to be evaluated. The present study aimed to evaluate the cytotoxic potential of potassium aluminum sulfate (alum) on fibroblasts when applied onto feldspathic ceramic before and after thermocycling. Forty-eight feldspathic ceramic specimens were divided into four groups (FC: no alum application or thermocycling; FCT: thermocycling without alum application; FA: alum application without thermocycling; FAT: alum application and thermocycling) (n = 12). Cell viability was assessed by using a tetrazolium salt 3-[4,5-dimethylthiazol-2-yl]-2,5-diphnyltetrazolium bromide assay at 24 and 72 h, and cell cultures without any ceramic specimens served as control (C). One sample from each material group was further analyzed with energy dispersive X-ray spectroscopy (EDX). Cell viability at different time intervals within each group was analyzed with Friedman tests, while Kruskal−Wallis tests were used to compare the test groups within each time interval. Pairwise comparisons were further resolved by using Wilcoxon tests (a = 0.05). C had lower (p = 0.01) and FA had higher (p = 0.019) cell viability after 72 h. After 24 h, the highest cell viability was observed in C (p ≤ 0.036). After 72 h, the differences between C and FA, C and FAT, FC and FA, and FCT and FAT were nonsignificant (p > 0.05). Cell viability was not affected by alum application or thermocycling at any time interval (p ≥ 0.631). EDX analysis showed an increase in potassium concentration in FA and FAT when compared with FC and FCT. Regardless of the time interval, alum application onto feldspathic ceramic and thermocycling did not influence the cell viability.

Development of low-shrinkage dental adhesives via blending with spiroorthocarbonate expanding monomer and unsaturated epoxy resin monomer

Polymerization shrinkage is one of the main drawbacks of dental resin adhesives. In this study, spiroorthocarbonate expanding monomer 3,9-diethyl-3,9-dimethylol -1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) and unsaturated epoxy resin monomer Diallyl bisphenol A diglycidyl ether (DBDE) were synthesized and utilized as anti-shrinkage-coupling additive of methacrylate-based adhesives. Polymerization process and physicochemical properties including double bond conversion, polymerization shrinkage, compatibility, mechanical performance, thermal stability, contact angle, shear bond strength and cytotoxicity were characterized. Results indicated that adhesives containing anti-shrinkage-coupling additive had reduced volume shrinkage, improved compatibility and enhanced shear bond strength. When the amount of additive was 20 wt%, the volume shrinkage was decreased by 45.8% (4.17 ± 0.32%) and the shear bond strength was increased by 49.6% (19.64 ± 0.99 MPa). The results also showed that the use of additive had no adversely affect on double bond conversion and cytotoxicity. Therefore, novel low-shrinkage resin adhesives were prepared via blending with spiroorthocarbonate expanding monomer and unsaturated epoxy resin monomer.

Bond Strength of Self-Adhesive Flowable Composites and Glass Ionomer Cements to Primary Teeth: A Systematic Review and Meta-Analysis of In Vitro Studies

Background: Conventional composites are largely used in pediatric restorative dentistry and demonstrate successful clinical outcomes. However, the need for simplification of operative steps in young or uncooperative children demands reliable alternatives. Therefore, the aim of the present systematic review and meta-analysis was to evaluate the in vitro bond strength of glass ionomer cements (GICs) and self-adhesive flowable composites (SFCs) on deciduous teeth. Methods: A comprehensive literature search according to the PRISMA checklist was manually and electronically performed by two independent reviewers through the following databases: MEDLINE/PubMed, Google Scholar, Scopus, and Embase, to include in vitro studies comparing GICs and SFCs bond strength values of restorations on primary teeth. In addition, three groups of meta-analyses were conducted using random-effects models. Results: Three articles meeting the inclusion criteria were selected and subjected to both qualitative and quantitative assessment. No statistically significant difference was found between SFC versus GIC; however, both groups significantly differed with conventional flowable composites (CFs). Conclusions: Despite the absence of significant difference in bond strength values, SFCs may be considered a valid alternative to GICs in the restoration of deciduous teeth, although CFs proved better in vitro performances.

Recent update on potential cytotoxicity, biocompatibility and preventive measures of biomaterials used in dentistry

Dental treatment is provided for a wide variety of oral health problems like dental caries, periodontal diseases, periapical infections, replacement of missing teeth and orthodontic problems. Various biomaterials, like composite resins, amalgam, glass ionomer cement, acrylic resins, metal alloys, impression materials, bone grafts, membranes, local anaesthetics, etc., are used for dental applications. The physical and chemical characteristics of these materials influence the outcome of dental treatment. It also impacts on the biological, allergic and toxic potential of biomaterials. With innovations in science and their positive results, there is also a need for awareness about the biological risks of these biomaterials. The aim of dental treatment is to have effective, yet safe, and long-lasting results for the benefit of patients. For this, it is important to have a thorough understanding of biomaterials and their effects on local and systemic health. Materials used in dentistry undergo a series of analyses before their oral applications. To the best of our knowledge, this is the first and original review that discusses the reasons for and studies on the toxicity of commonly used biomaterials for applications in dentistry. It will help clinicians to formulate a methodical approach for the selection of dental biomaterials, thus providing an awareness for forecasting their risk of toxic reactions.