Atomically Dispersed Fe-N4 Modified with Precisely Located S for Highly Efficient Oxygen Reduction

A novel electrocatalyst from TOCN/CGG hydrogel-supported Fe-rich sludge and its performance in treating azo dyes-contaminated water

Monolithic electrocatalysts are desired for the electro-Fenton oxidation system. We used a hydrogel consisting of TEMPO-oxidized cellulose nanofibers (TOCN) and cationic guar gum (CGG) to disperse and support Fe-rich sludge and finally obtained a Fe-doped biochar (denoted as C-Sludge@TOCN/CGG) after the freeze-drying and carbonization. This C-Sludge@TOCN/CGG exhibited a porous structure with evenly-distributed Fe due to the inherently three-dimensional porous structure of TOCN/CGG hydrogel and the abundant carbon content. Importantly, Fe and FeO existed in C-Sludge@TOCN/CGG due to the presence of TOCN and CGG during the pyrolysis. The electrochemical properties of C-Sludge@TOCN/CGG demonstrated its good electrocatalytic activity and stability with few side reactions. It had good performance in the electrocatalytic degradation of various azo dyes, attributed to the synergistic integration of TOCN/CGG-derived carbon matrix and carbonized Fe-rich sludge particles. Specifically, two transient radicals (i.e. ·OH and ·O2-) primarily improved the electrocatalytic degradation performance of C-Sludge@TOCN/CGG. This C-Sludge@TOCN/CGG also efficiently degraded a papermill-sourced wastewater containing direct red 23, direct yellow 11, direct black 19 and toner, in which the COD value decreased from 365.12 to 179.13 mg/L within 9 h. This work provides an example of utilizing renewable materials and solid waste to design electrocatalysts to address the wastewater issue.

Synergistic enhancement of Ni2P anode for high lithium/sodium storage by N, P, S triply-doping and soft template-assisted strategy

Transition metal phosphides have demonstrated excellent performance in the field of energy conversion and storage, where nickel phosphide is one of the most prominent type of phosphides. However, achieving long cycle life with higher specific capacity in the case of Ni2P is still a great challenge. In this study, the composition and structure of Ni2P composites are rationally and precisely adjusted by heteroatoms doping and micelle-assisted methods to attain high capacity for longer cycles at high rate. Among all studied combinations, nickel phosphide particles anchored to triple heteroatom (N, P, S) doped carbon network skeleton (Ni2P@NPS) exhibited specific capacities of 727.3, 586.6, and 321.5 mA h g-1 after 1000 cycles at 1, 2 and 6 A g-1 for lithium-ion batteries (LIBs) and 230.1 mA h g-1 at 1 A g-1 for sodium-ion batteries (SIBs) after 560 cycles. The introduction of heteroatoms optimized the electronic structure of the electrode materials and promoted mass and charge transfer, while triple-heteroatom doped carbon substrates and uniformly dispersed spherical structures formed an active three-dimensional conductive network structure that provided a stronger driving force and richer channels for Li+/Na+ transport. Theoretical calculations showed that the high content of pyrrole nitrogen as well as the additional sulfur ensured improved electrical conductivity and enhanced ion adsorption performance. This study encourages further research into the synergistic effect of N, P, S co-doping materials for improving Li+/Na+ storage and the exploration of other heteroatom co-doping systems.

Theory-guided design of S-doped Fe/Co dual-atom nanozymes for highly efficient oxidase mimics

The advent of dual-atom nanozymes (DAzymes) featuring distinctive bimetallic active sites garnered significant attention, representing enhanced iterations of conventional single-atom nanozymes. The quest for an effective and universal strategy to modulate the catalytic activity of DAzymes posed a formidable challenge, yet few published reports addressed this. Herein, we designed and synthesized S-doped Fe/Co DAzymes (S-FeCo-NC) under theoretical guidance and revealed their excellent oxidase-like activity. Experimental and theoretical calculations indicated that the superior oxidase-like activity exhibited by S-FeCo-NC was attributed to the S-doping, which modulated the local electronic structure of the dual-atom active site. This modulation of the local electronic structure significantly optimizes oxygen adsorption energy, thereby accelerating the rate of enzyme-catalyzed reactions. As a proof-of-concept, this study integrated S-FeCo-NC with the cascade inhibition reaction of acetylcholinesterase (AChE) to devise a sensitive analytical platform for detecting organophosphorus pesticides. This study paved the way for elucidating the correlation between the local electronic structure of the active site and enzyme activity, offering novel methodologies and insights for the rational design of DAzymes.

Nonmetal Doping Modulates Fe Single-Atom Catalysts for Enhancement in Peroxidase Mimicking via Symmetry Disruption, Distortion, and Charge Transfer

Developing biomimetic catalysts with excellent peroxidase (POD)-like activity has been a long-standing goal for researchers. Doping nonmetallic atoms with different electronegativity to boost the POD-like activity of Fe-N-C single-atom catalysts (SACs) has been successfully realized. However, the introduction of heteroatoms to regulate the coordination environment of the central Fe atom and thus influence the activation of the H2O2 molecule in the POD-like reaction has not been extensively explored. Herein, the effect of different doping sites and numbers of heteroatoms (P, S, B, and N) on the adsorption and activation of H2O2 molecules of Fe-N sites is thoroughly investigated by density functional theory (DFT) calculations. In general, alternation in the catalytic efficiency directly depends on the transfer of electrons and the geometrical shifts near the Fe-N site. First, the symmetry disruption of the Fe-N4 site by P, S, and B doping is beneficial to the activation of H2O2 due to a significant reduction in the adsorption energies. In some cases, without Fe-N4 site disruption, the configurations fail to modulate the adsorption behavior of H2O2. Second, Fe-N-P/S configurations exhibit a stronger affinity for H2O2 molecules due to the significant out-of-plane distortions induced by larger atomic radii of P and S. Moreover, the synergistic effects of Fe and doping atoms P, S, and B with weaker electronegativity than that of N atoms promote electron donation to generated oxygen-containing intermediates, thus facilitating subsequent electron transfer with other substrates. This work demonstrates the critical role of tuning the coordinating environment of Fe-N active centers by heteroatom doping and provides theoretical guidance for controlling the types by breaking the symmetry of SACs to achieve optimal POD-like catalytic activity and selectivity.

PtCo nanoalloy embedded nitrogen-doped carbon nanotube for rechargeable Zn-air batteries

The large-scale application of metal-air batteries strongly depends on the development of cost-effective, highly efficient, and durable bifunctional oxygen catalysts. In this work, a facile approach for preparing the monodisperse PtCo nanoalloy anchored the nitrogen-doped carbon nanotubes (PtCo/NCNT) for zinc-air batteries is reported. The nitrogen-doped carbon shell prevents PtCo nanoalloy from exfoliation, dissolution, and aggregation and enables the accessibility of electrolytes to the alloy surface and the electron transfer. Besides, the strong interaction between PtCo nanoalloy and nitrogen-doped carbon can efficiently modulate the electronic structure of the formed active sites. When used as a cathode catalyst, the constructed rechargeable zinc-air battery presents higher power density (268 mW cm-2), specific capacity (840 mAh g-1), and excellent stability. More importantly, the PtCo/NCNT catalyst allows the all-solid-state cell to exhibit remarkable flexibility and high round-trip efficiency at various bending states, demonstrating a potential possibility to replace the conventional Pt/C and RuO2 catalysts.

Sulfur-Bridged Asymmetric CuNi Bimetallic Atom Sites for CO2 Reduction with High Efficiency

Double-atom catalysts (DACs) with asymmetric coordination are crucial for enhancing the benefits of electrochemical carbon dioxide reduction and advancing sustainable development, however, the rational design of DACs is still challenging. Herein, this work synthesizes atomically dispersed catalysts with novel sulfur-bridged Cu-S-Ni sites (named Cu-S-Ni/SNC), utilizing biomass wool keratin as precursor. The plentiful disulfide bonds in wool keratin overcome the limitations of traditional gas-phase S ligand etching process and enable the one-step formation of S-bridged sites. X-ray absorption spectroscopy (XAS) confirms the existence of bimetallic sites with N2Cu-S-NiN2 moiety. In H-cell, Cu-S-Ni/SNC shows high CO Faraday efficiency of 98.1% at -0.65 V versus RHE. Benefiting from the charge tuning effect between the metal site and bridged sulfur atoms, a large current density of 550 mA cm-2 can be achieved at -1.00 V in flow cell. Additionally, in situ XAS, attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and density functional theory (DFT) calculations show Cu as the main adsorption site is dual-regulated by Ni and S atoms, which enhances CO2 activation and accelerates the formation of *COOH intermediates. This kind of asymmetric bimetallic atom catalysts may open new pathways for precision preparation and performance regulation of atomic materials toward energy applications.

Fabrication of carbon-based materials derived from a cobalt-based organic framework for enhancing photocatalytic degradation of dyes

The pyrolysis of metal-organic frameworks (MOFs) has emerged as a promising route to synthesize carbon/metal oxide-based materials with diverse phase compositions, morphologies, sizes and surface areas. In this paper, 1,3,5-benzoic acid (BTC) and 2,4,6-tri(4-pyridinyl)-1-pyridine (TPP) were used as ligands to prepare a novel cobalt-based MOF (Co-MOF) which was used as a precursor to obtain five carbon-based materials at different temperatures (Co-C200/400/600/800/1000). Furthermore, five dyes were used as degradation targets to investigate the photocatalytic degradation performance of the title materials under UV light irradiation. Co-C1000 exhibited the best photocatalytic degradation performance for methyl orange (MO), and the degradation rate could reach 99.21%. The enhanced photocatalytic activity was attributed to narrower band-gaps and a synergistic effect originating from the well-aligned straddling band structures between Co/CoO/Co3O4 and C, also resulting in a faster interfacial charge transfer during the photocatalytic reaction. This study will aid in the development of photocatalysts generated from carbon-based materials via the pyrolysis transformation of MOFs, therefore greatly enhancing the photocatalytic performance.

Vacancy Defects Inductive Effect of Asymmetrically Coordinated Single-Atom Fe─N3 S1 Active Sites for Robust Electrocatalytic Oxygen Reduction with High Turnover Frequency and Mass Activity

The development of facile, efficient synthesis method to construct low-cost and high-performance single-atom catalysts (SACs) for oxygen reduction reaction (ORR) is extremely important, yet still challenging. Herein, an atomically dispersed N, S co-doped carbon with abundant vacancy defects (NSC-vd) anchored Fe single atoms (SAs) is reported and a vacancy defects inductive effect is proposed for promoting electrocatalytic ORR. The optimized catalyst featured of stable Fe─N3 S1 active sites exhibits excellent ORR activity with high turnover frequency and mass activity. In situ Raman, attenuated total reflectance surface enhanced infrared absorption spectroscopy reveal the Fe─N3 S1 active sites exhibit different kinetic mechanisms in acidic and alkaline solutions. Operando X-ray absorption spectra reveal the ORR activity of Fe SAs/NSC-vd catalyst in different electrolyte is closely related to the coordination structure. Theoretical calculation reveals the upshifted d band center of Fe─N3 S1 active sites facilitates the adsorption of O2 and accelerates the kinetics process of *OH reduction. The abundant vacancy defects around the Fe─N3 S1 active sites balance the OOH* formation and *OH reduction, thus synergetically promoting the electrocatalytic ORR process.

3D Hollow Hierarchical Porous Carbon with Fe-N4 -OH Single-Atom Sites for High-Performance Zn-Air Batteries

The development of innovative and efficient Fe-N-C catalysts is crucial for the widespread application of zinc-air batteries (ZABs), where the inherent oxygen reduction reaction (ORR) activity of Fe single-atom sites needs to be optimized to meet the practical application. Herein, a three-dimensional (3D) hollow hierarchical porous electrocatalyst (ZIF8@FePMPDA-920) rich in asymmetric Fe-N4 -OH moieties as the single atomic sites is reported. The Fe center is in a penta-coordinated geometry with four N atoms and one O atom to form Fe-N4 -OH configuration. Compared to conventional Fe-N4 configuration, this unique structure can weaken the adsorption of intermediates by reducing the electron density of the Fe center for oxygen binding, which decreases the energy barrier of the rate-determining steps (RDS) to accelerate the ORR and oxygen evolution reaction (OER) processes for ZABs. The rechargeable liquid ZABs (LZABs) equipped with ZIF8@FePMPDA-920 display a high power density of 123.11 mW cm-2 and a long cycle life (300 h). The relevant flexible all-solid-state ZABs (FASSZABs) also display outstanding foldability and cyclical stability. This work provides a new perspective for the structural design of single-atom catalysts in the energy conversion and storage areas.

P-doped binary Ni/Fe-N-C for enhanced oxygen electrocatalysis performance

Adjusting the micro-environment of highly dispersive metals on carbon supports has been proved to be effective for achieving enhanced electrocatalysis performance. Herein, we delicately design a phosphorus-doped binary NiFe-nitrogen-carbon material (denoted as P-NiFe-NC), taking advantage of the coupling reaction between phenylphosphonamide (P dopant) and formamide (the carbon and nitrogen sources). The XPS N 1s fine scan reveals the strong interplay of N and P by the positively shifted binding energy of pyridinic N species after P incorporation, and the chemical state of Fe species is influenced accordingly. In addition, the P doping can enlarge the specific surface area and increase the meso/macroporosity of NiFe-NC, thus contributing to the enhancement of mass transfer inside the pores. The P-NiFe-NC sample exhibits favorable bifunctional oxygen electrocatalysis performance, rendering an ORR half-wave potential of 0.85 V and an OER potential of 1.69 V@10.0 mA cm-2, superior to those of P-free NiFe-NC. Assembled into Zn-air batteries, P-NiFe-NC delivers a high specific power of 161.36 mW cm-2 and stable charge/discharge for over 100 h (corresponding to 300 cycles).

Iron/iron carbide coupled with S, N co-doped porous carbon as effective oxygen reduction reaction catalyst for microbial fuel cells

As a novel energy device, microbial fuel cells (MFCs) have attracted much attention for their dual functions of electricity generation and sewage treatment. However, the sluggish oxygen reduction reaction (ORR) kinetic on the cathode have hindered the practical application of MFCs. In this work, metallic organic framework derived carbon framework co-doped by Fe, S, N tri-elements was used as alternative electrocatalyst to the conventional Pt/C cathode catalyst in pH-universal electrolytes. The amount of thiosemicarbazide from 0.3 to 3 g determined the surface chemical property, and therefore the ORR activity of FeSNC catalysts. The sulfur/nitrogen doping and Fe/Fe₃C embedded in carbon shell was characterized by X-ray photoelectron spectroscopy and transmission electron microscopy. The synergy of iron salt and thiosemicarbazide contributed to the improvement of nitrogen and sulfur doping. Sulfur atoms were successfully doped into the carbon matrix and formed a certain amount of thiophene- and oxidized-sulfur. The optimal FeSNC-3 catalyst synthesized with 1.5 g of thiosemicarbazide exhibited the highest ORR activity with a positive half wave potential of 0.866 V in alkaline and 0.691 V (vs. Reversible Hydrogen Electrode) in neutral electrolyte, which both outperformed the commercial Pt/C catalyst. However, as the amount of thiosemicarbazide surpassed 1.5 g, the catalytic performance of FeSNC-4 was lowered, and this could be assigned to the decreased defects and low specific surface area. The excellent ORR performance in neutral medium urged FeSNC-3 as good cathode catalyst in single chambered MFC (SCMFC). It showed the highest maximum power density of 2126 ± 100 mW m^-2, excellent output stability of 8.14% decline in 550 h, chemical oxygen demand removal of 90.7 ± 1.6% and coulombic efficiency of 12.5 ± 1.1%, all superior to those of benchmark SCMFC-Pt/C (1637 ± 35 mW m^-2, 15.4%, 88.9 ± 0.9%, and 10.2 ± 1.1%). These outstanding results were associated to the large specific surface area and synergistic interaction of multiple active sites, like Fe/Fe₃C, Fe-N₄, pyridinic N, graphite N and thiophene-S.

Fe/Co dual metal catalysts modulated by S-ligands for efficient acidic oxygen reduction in PEMFC

Here, we report a conceptual strategy for introducing spatial sulfur (S)-bridge ligands to regulate the coordination environment of Fe-Co-N dual-metal centers (Spa-S-Fe,Co/NC). Benefiting from the electronic modulation, Spa-S-Fe,Co/NC catalyst showed remarkably enhanced oxygen reduction reaction (ORR) performance with a half-wave potential (E1/2) of 0.846 V and satisfactory long-term durability in acidic electrolyte. Combined experimental and theoretical studies revealed that the excellent acidic ORR activity with a remarkable stability observed for Spa-S-Fe,Co/NC is attributable to the optimal adsorption-desorption of ORR oxygenated intermediates achieved through charge-modulation of Fe-Co-N bimetallic centers by the spatial S-bridge ligands. These findings provide a unique perspective to regulate the local coordination environment of catalysts with dual-metal-centers to optimize their electrocatalytic performance.

Competitive Coordination-Oriented Monodispersed Cobalt Sites on a N-Rich Porous Carbon Microsphere Catalyst for High-Performance Zn-Air Batteries

Metal/nitrogen-doped carbon single-atom catalysts (M-N-C SACs) show excellent catalytic performance with a maximum atom utilization and customizable tunable electronic structure. However, precisely modulating the M-N_x coordination in M-N-C SACs remains a grand challenge. Here, we used a N-rich nucleobase coordination self-assembly strategy to precisely regulate the dispersion of metal atoms by controlling the metal ratio. Meanwhile, the elimination of Zn during pyrolysis produced porous carbon microspheres with a specific surface area of up to 1151 m² g^-1, allowing maximum exposure of Co-N₄ sites and facilitating charge transport in the oxygen reduction reaction (ORR) process. Thereby, the monodispersed cobalt sites (Co-N₄) in N-rich (18.49 at%) porous carbon microspheres (CoSA/N-PCMS) displayed excellent ORR activity under alkaline conditions. Simultaneously, the Zn-air battery (ZAB) assembled with CoSA/N-PCMS outperformed Pt/C+RuO₂-based ZABs in terms of power density and capacity, proving that they have good prospects for practical application.

Doped Graphene To Mimic the Bacterial NADH Oxidase for One-Step NAD+ Supplementation in Mammals

Nicotinamide adenine dinucleotide (NAD) is a critical regulator of metabolic networks, and declining levels of its oxidized form, NAD⁺, are closely associated with numerous diseases. While supplementing cells with precursors needed for NAD⁺ synthesis has shown poor efficacy in combatting NAD⁺ decline, an alternative strategy is the development of synthetic materials that catalyze the oxidation of NADH into NAD⁺, thereby taking over the natural role of the NADH oxidase (NOX) present in bacteria. Herein, we discovered that metal-nitrogen-doped graphene (MNGR) materials can catalyze the oxidation of NADH into NAD⁺. Among MNGR materials with different transition metals, Fe-, Co-, and Cu-NGR displayed strong catalytic activity combined with >80% conversion of NADH into NAD⁺, similar specificity to NOX for abstracting hydrogen from the pyridine ring of nicotinamide, and higher selectivity than 51 other nanomaterials. The NOX-like activity of FeNGR functioned well in diverse cell lines. As a proof of concept of the in vivo application, we showed that FeNGR could specifically target the liver and remedy the metabolic flux anomaly in obesity mice with NAD⁺-deficient cells. Overall, our study provides a distinct insight for exploration of drug candidates by design of synthetic materials to mimic the functions of unique enzymes (e.g., NOX) in bacteria.

Carbon Nanocage with Maximum Utilization of Atomically Dispersed Iron as Efficient Oxygen Electroreduction Nanoreactor

As key parameters of electrocatalysts, the density and utilization of active sites determine the electrocatalytic performance toward oxygen reduction reaction. Unfortunately, prevalent oxygen electrocatalysts fail to maximize the utilization of active sites due to inappropriate nanostructural design. Herein, a nano-emulsion induced polymerization self-assembly strategy is employed to prepare hierarchical meso-/microporous N/S co-doped carbon nanocage with atomically dispersed FeN₄ (denoted as Meso/Micro-FeNSC). In situ scanning electrochemical microscopy technology reveals the density of available active sites for Meso/Micro-FeNSC reach to 3.57 × 10¹⁴ sites cm^-2 , representing more than threefold improvement compared to micropore-dominant Micro-FeNSC counterpart (1.07 × 10¹⁴ sites cm^-2 ). Additionally, the turnover frequency of Meso/Micro-FeNSC is also improved to 0.69 from 0.50 e^- site^-1 s^-1 for Micro-FeNSC. These properties motivate Meso/Micro-FeNSC as efficient oxygen electroreduction electrocatalyst, in terms of outstanding half-wave potential (0.91 V), remarkable kinetic mass specific activity (68.65 A g^-1 ), and excellent robustness. The assembled Zn-air batteries with Meso/Micro-FeNSC deliver high peak power density (264.34 mW cm^-2 ), large specific capacity (814.09 mA h g^-1 ), and long cycle life (>200 h). This work sheds lights on quantifying active site density and the significance of maximum utilization of active sites for rational design of advanced catalysts.

Activating Single-Atom Ni Site via First-Shell Si Modulation Boosts Oxygen Reduction Reaction

Atomically dispersed nitrogen-coordinated 3d transition-metal site on carbon support (M-NC) are promising alternatives to Pt group metal-based catalysts toward oxygen reduction reaction (ORR). However, despite the excellent activities of most of M-NC catalysts, such as Fe-NC, Co-NC et al., their durability is far from satisfactory due to Fenton reaction. Herein, this work reports a novel Si-doped Ni-NC catalyst (Ni-SiNC) that possesses high activity and excellent stability. X-ray absorption fine structure and aberration-corrected transmission electron microscopy uncover that the single-atom Ni site is coordinated with one Si atom and three N atoms, constructing Ni-Si₁ N₃  moiety. The Ni-SiNC catalyst exhibits a half-wave potential (E_1/2 ) of 0.866 V versus RHE, with a distinguished long-term durability in alkaline media of only 10 mV negative shift in E_1/2  after 35 000 cycles, which is also validated in Zn-air battery. Density functional theory calculations reveal that the Ni-Si₁ N₃  moiety facilitates ORR kinetics through optimizing the adsorption of intermediates.

Decorating Single-Atomic Mn Sites with FeMn Clusters to Boost Oxygen Reduction Reaction

The regulation of electron distribution of single-atomic metal sites by atomic clusters is an effective strategy to boost their intrinsic activity of oxygen reduction reaction (ORR). Herein we report the construction of single-atomic Mn sites decorated with atomic clusters by an innovative combination of post-adsorption and secondary pyrolysis. The X-ray absorption spectroscopy confirms the formation of Mn sites via Mn-N₄ coordination bonding to FeMn atomic clusters (FeMn_ac /Mn-N₄ C), which has been demonstrated theoretically to be conducive to the adsorption of molecular O₂ and the break of O-O bond during the ORR process. Benefiting from the structural features above, the FeMn_ac /Mn-N₄ C catalyst exhibits excellent ORR activity with half-wave potential of 0.79 V in 0.5 M H₂ SO₄ and 0.90 V in 0.1 M KOH as well as preeminent Zn-air battery performance. Such synthetic strategy may open up a route to construct highly active catalysts with tunable atomic structures for diverse applications.

A Review of In-Situ Techniques for Probing Active Sites and Mechanisms of Electrocatalytic Oxygen Reduction Reactions

Electrocatalytic oxygen reduction reaction (ORR) is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal-O2/air batteries, etc. However, the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process, and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction. This makes them difficult to be accurately captured, making the identification of ORR active sites and the elucidation of ORR mechanisms difficult. Thus, it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR. This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts. Specifically, the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized, such as phase, valence, electronic transfer, coordination, and spin states varies. In-situ revelation of intermediate adsorption/desorption behavior, and the real-time monitoring of the product nucleation, growth, and reconstruction evolution are equally emphasized in the discussion. Other interference factors, as well as in-situ signal assignment with the aid of theoretical calculations, are also covered. Finally, some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.

Adsorption Energy in Oxygen Electrocatalysis

Adsorption energy (AE) of reactive intermediate is currently the most important descriptor for electrochemical reactions (e.g., water electrolysis, hydrogen fuel cell, electrochemical nitrogen fixation, electrochemical carbon dioxide reduction, etc.), which can bridge the gap between catalyst's structure and activity. Tracing the history and evolution of AE can help to understand electrocatalysis and design optimal electrocatalysts. Focusing on oxygen electrocatalysis, this review aims to provide a comprehensive introduction on how AE is selected as the activity descriptor, the intrinsic and empirical relationships related to AE, how AE links the structure and electrocatalytic performance, the approaches to obtain AE, the strategies to improve catalytic activity by modulating AE, the extrinsic influences on AE from the environment, and the methods in circumventing linear scaling relations of AE. An outlook is provided at the end with emphasis on possible future investigation related to the obstacles existing between adsorption energy and electrocatalytic performance.

Tuning Fe Spin Moment in Fe-N-C Catalysts to Climb the Activity Volcano via a Local Geometric Distortion Strategy

As the most promising alternative to platinum-based catalysts for cathodic oxygen reduction reaction (ORR) in proton exchange membrane fuel cells, further performance enhancement of Fe-N-C catalysts is highly expected to promote their wide application. In Fe-N-C catalysts, the single Fe atom forms a square-planar configuration with four adjacent N atoms (D4h symmetry). Breaking the D4h symmetry of the FeN4 active center provides a new route to boost the activity of Fe-N-C catalysts. Herein, for the first time, the deformation of the square-planar coordination of FeN4 moiety achieved by introducing chalcogen oxygen groups (XO2 , X = S, Se, Te) as polar functional groups in the Fe-N-C catalyst is reported. The theoretical and experimental results demonstrate that breaking the D4h symmetry of FeN4 results in the rearrangement of Fe 3d electrons and increases spin moment of Fe centers. The efficient spin state manipulation optimizes the adsorption energetics of ORR intermediates, thereby significantly promoting the intrinsic ORR activity of Fe-N-C catalysts, among which the SeO2 modified catalyst lies around the peak of the ORR volcano plot. This work provides a new strategy to tune the local coordination and thus the electronic structure of single-atom catalysts.

Distribution Pattern of Metal Atoms in Bimetal-Doped Pyridinic-N4 Pores Determines Their Potential for Electrocatalytic N2 Reduction

Doping two single transition-metal (TM) atoms on a substrate host opens numerous possibilities for catalyst design. However, what if the substrate contains more than one vacancy site? Then, the combination of two TMs along with their distribution patterns becomes a design parameter potentially complementary to the substrate itself and the bimetal composition. In this study, we investigate ammonia synthesis under mild electrocatalytic conditions on a transition-metal-doped porous C₂₄N₂₄ catalyst using density functional theory (DFT). The TMs studied include Ti, Mn, and Cu in a 2:4 dopant ratio (Ti₂Mn₄@C₂₄N₂₄ and Ti₂Cu₄@C₂₄N₂₄). Our computations show that a single Ti atom in both catalysts exhibits the highest selectivity for N₂ fixation at ambient conditions. This work is a good theoretical model to establish the structure-activity relationship, and the knowledge earned from the metal-N₄ moieties may help studies of related nanomaterials, especially those with curved structures.

Simultaneously Integrate Iron Single Atom and Nanocluster Triggered Tandem Effect for Boosting Oxygen Electroreduction

Atomically nitrogen-coordinated iron atoms on carbon (FeNC) catalysts are emerging as attractive materials to substitute precious-metal-based catalysts for the oxygen reduction reaction (ORR). However, FeNC usually suffers from unsatisfactory performance due to the symmetrical charge distribution around the iron site. Elaborately regulating the microenvironment of the central Fe atom can substantially improve the catalytic activity of FeNC, which remains challenging. Herein, N/S co-doped porous carbons are rationally prepared and are verified with rich Fe-active sites, including atomically dispersed FeN₄ and Fe nanoclusters (FeSA-FeNC@NSC), according to systematically synchrotron X-ray absorption spectroscopy analysis. Theoretical calculation verifies that the contiguous S atoms and Fe nanoclusters can break the symmetric electronic structure of FeN₄ and synergistically optimize 3d orbitals of Fe centers, thus accelerating OO bond cleavage in OOH* for improving ORR activity. The FeSA-Fe_NC @NSC delivers an impressive ORR activity with half-wave-potential of 0.90 V, which exceeds that of state-of-the-art Pt/C (0.87 V). Furthermore, FeSA-Fe_NC @NSC-based Zn-air batteries deliver excellent power densities of 259.88 and 55.86 mW cm^-2 in liquid and all-solid-state flexible configurations, respectively. This work presents an effective strategy to modulate the microenvironment of single atomic centers and boost the catalytic activity of single-atom catalysts by tandem effect.

Electronic Structure Regulation of Iron Phthalocyanine Induced by Anchoring on Heteroatom-Doping Carbon Sphere for Efficient Oxygen Reduction Reaction and Al-Air Battery

Aluminum-air batteries (AABs) are deemed as a potential clean energy storage device. However, exploiting high-efficiency and stable oxygen reduction reaction (ORR) electrocatalysts in AABs is still a challenge. Iron phthalocyanine (FePc) shows a great prospect in ORR but still far from Pt-based catalysts. Here, the hybrid electrocatalysts of monolayer FePc and hollow N,S-doped carbon spheres (HNSCs) are innovatively constructed through π-π stacking to achieve high dispersion. The resulting FePc@HNSC catalyst exhibits an outstanding ORR activity, outperforming that of pristine FePc and even most Fe-based catalysts reported to date. Moreover, the AAB using FePc@HNSC catalyst not only demonstrates a superior power density than the battery with Pt/C, but also displays stable discharge voltages and excellent durability. Furthermore, the theoretical calculations confirm that the charge distribution and d-band center of the Fe atom in FePc are efficiently optimized by hybrid configuration via the introduction of N,S-doped carbon substrate. The design leads to an enriched electron density around Fe active sites and significant reduction of energy barrier for OH* formation, which are favorable for the improvement of electrocatalytic ORR performance. This work provides a chance to expand the application of metallic macrocyclic compound electrocatalysts in various energy technologies.

Simultaneously Engineering the Coordination Environment and Pore Architecture of Metal-Organic Framework-Derived Single-Atomic Iron Catalysts for Ultraefficient Oxygen Reduction

Designing highly efficient and durable electrocatalysts that accelerate sluggish oxygen reduction reaction kinetics for fuel cells and metal-air batteries are highly desirable but challenging. Herein, a facile yet robust strategy is reported to rationally design single iron active centers synergized with local S atoms in metal-organic frameworks derived from hierarchically porous carbon nanorods (Fe/N,S-HC). The cooperative trithiocyanuric acid-based coating not only introduces S atoms that regulate the coordination environment of the active centers, but also facilitates the formation of a hierarchically porous structure. Benefiting from electronic modulation and architectural functionality, Fe/N,S-HC catalyst shows markedly enhanced ORR performance with a half-wave potential (E_1/2 ) of 0.912 V and satisfactory long-term durability in alkaline medium, outperforming those of commercial Pt/C. Impressively, Fe/N,S-HC-based Zn-air battery also presents outstanding battery performance and long-term stability. Both electrochemical experimental and density functional theoretical (DFT) calculated results suggest that the FeN₄ sites tailored with local S atoms are favorable for the adsorption/desorption of oxygen intermediate, resulting in lower activation energy barrier and ultraefficient oxygen reduction catalytic activity. This work provides an atomic-level combined with porous morphological-level insights into oxygen reduction catalytic property, promoting rational design and development of novel highly efficient single-atom catalysts for the renewable energy applications.

Atomically Structural Regulations of Carbon-Based Single-Atom Catalysts for Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂ RR) converting CO₂ into value-added chemicals and fuels to realize carbon recycling is a solution to the problem of renewable energy shortage and environmental pollution. Among all the catalysts, the carbon-based single-atom catalysts (SACs) with isolated metal atoms immobilized on conductive carbon substrates have shown significant potential toward CO₂ RR, which intrigues researchers to explore high-performance SACs for fuel and chemical production by CO₂ RR. Especially, regulating the coordination structures of the metal centers and the microenvironments of the substrates in carbon-based SACs has emerged as an effective strategy for the tailoring of their CO₂ RR catalytic performance. In this review, the current in situ/operando study techniques and the fundamental parameters for CO₂ RR performance are first briefly presented. Furthermore, the recent advances in synthetic strategies which regulate the atomic structures of the carbon-based SACs, including heteroatom coordination, coordination numbers, diatomic metal centers, and the microenvironments of substrates are summarized. In particular, the structure-performance relationship of the SACs toward CO₂ RR is highlighted. Finally, the inevitable challenges for SACs are outlined and further research directions toward CO₂ RR are presented from the perspectives.

Linking Bi-Metal Distribution Patterns in Porous Carbon Nitride Fullerene to Its Catalytic Activity toward Gas Adsorption

Immobilization of two single transition metal (TM) atoms on a substrate host opens numerous possibilities for catalyst design. If the substrate contains more than one vacancy site, the combination of TMs along with their distribution patterns becomes a design parameter potentially complementary to the substrate itself and the bi-metal composition. By means of DFT calculations, we modeled three dissimilar bi-metal atoms (Ti, Mn, and Cu) doped into the six porphyrin-like cavities of porous C₂₄N₂₄ fullerene, considering different bi-metal distribution patterns for each binary complex, viz. Ti_xCu_z@C₂₄N₂₄, Ti_xMn_y@C₂₄N₂₄, and Mn_yCu_z@C₂₄N₂₄ (with x, y, z = 0-6). We elucidate whether controlling the distribution of bi-metal atoms into the C₂₄N₂₄ cavities can alter their catalytic activity toward CO₂, NO₂, H₂, and N₂ gas capture. Interestingly, Ti₂Mn₄@C₂₄N₂₄ and Ti₂Cu₄@C₂₄N₂₄ complexes showed the highest activity and selectively toward gas capture. Our findings provide useful information for further design of novel few-atom carbon-nitride-based catalysts.

Copper-based single-atom alloys for heterogeneous catalysis

Heterogeneous catalysts, as crucial industrial commodities, play an important role in industrial production, especially in energy catalysis. Traditional noble metal catalysts cannot meet the increasing demand. Therefore, the exploration of cost-effective catalysts with high activity and selectivity is important to promote chemical production. Single-atom alloy (SAA) catalysts reduce the use of precious metals compared with traditional catalysts. The unique structure of SAAs, extremely high atom utilization and high catalytic selectivity give them a prominent position in heterogeneous catalysis. SAAs are widely used in selective hydrogenation/dehydrogenation, carbon dioxide reduction reaction (CO2RR), hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and nitric oxide reduction reaction (NORR). Here, the applications and research progress of copper-based single-atom alloys in the various catalytic reactions mentioned above are mainly introduced, and the factors (such as synthesis method, composition content, etc.) affecting the catalytic performance are analyzed using a combination of various characterization and testing methods.