Self-Assembly MXene-rGO/CoNi Film with Massive Continuous Heterointerfaces and Enhanced Magnetic Coupling for Superior Microwave Absorber

Few-Layered MXene Modulating In Situ Growth of Carbon Nanotubes for Enhanced Microwave Absorption

MXene is widely used in the fields of microwave absorption and electromagnetic shielding to balance electromagnetic pollution with the development of communication technologies and human health, due to its excellent surface functional groups and tunable electronic properties. Although pure multilayered MXene has an excellent accordion-like structure, the weak dielectric loss and lack of magnetic loss result in poor microwave absorption performance. Here, we propose a strategy for the catalytic growth of CNTs by the electrophoretic deposition of adsorbed metal ions, leading to the successful preparation of Ni-MWCNTs/Ti3C2Tx composites with a "layer-by-layer" structure, achieved through in situ regulated growth of CNTs. By introducing dielectric-magnetic synergy to improve the impedance matching conditions, and by regulating the diameter of the CNTs to alter the electromagnetic parameters of Ni-MWCNTs/Ti3C2Tx, the 2-Ni-MWCNTs/Ti3C2Tx composite achieves the best reflection loss (RL) value of -44.08 dB and an effective absorption bandwidth of 1.52 GHz at only 2.49 mm thickness. This unique layered structure and the regulation strategy provide new opportunities for the development of few-layered MXene composites.

Ultra-Bandwidth Microwave Absorption and Low Angle Sensitivity in Dual-Network Aerogels with Dual-Scale Pores

Aerogels with porous structures offer an attractive approach to modulating electromagnetic parameters and enhancing electromagnetic wave (EMW) absorption performance. However, conventional aerogels are limited by their single-scale pore size and fixed orientation, which constrain their EMW absorption capabilities. This study introduces aerogels with dual-scale pores and dual-network structure constructed via constant-temperature freezing and secondary-infusion freezing method. Multiscale aerogels with both micrometer- and submillimeter-scale pores are constructed when the Ti3C2Tx MXene and thermoplastic polyurethane solution is frozen and dried at a specific temperature, leading to an ultra-wide effective absorption bandwidth (EAB) reaching 10.41 GHz in the vertical direction. Furthermore, to address the poor EMW absorption in the parallel direction, a secondary infusion freezing method is applied to form an aerogel with a dual-network structure, which forms reflective interfaces perpendicular to the incident EMW in various directions. This adjustment enhances the EAB in the parallel direction from 1.58 to 5.93 GHz, marking a 275.32% enhancement, while the EAB in the vertical incident direction reaches 8.08 GHz. This design strategy overcomes the limitations of structural scale and arrangement direction, enriching the attenuation mechanisms of the absorber, while effectively reducing sensitivity to the direction of incoming EMW, offering new insights for designing efficient EMW absorbers.

Robust Multifunctional Films with Excellent EMI Shielding, Anti-Peeling, and Joule Heating Performances Enabled by an Encapsulated Highly Conductive Fabric Strategy

Recently, the issue of electromagnetic pollution has become increasingly prominent. Flexible polymer films with various conductive fillers are preferred to address this problem due to their highly efficient and durable electromagnetic interference (EMI) shielding performance. However, their applications are restricted by the unbalanced and insufficient electromagnetic wave absorption and shielding capabilities, as well as the weak interlayer bonding force. In this work, robust flexible multifunctional AgNW/MXene/NiCo-C (AMN) films are fabricated by hierarchical casting assembly and an encapsulated conductive fabric strategy. The synergistic effect of the conductive-absorption integrated sandwich core fabric and the conductive encapsulation layer collaborate to provide excellent absorption-dominated EMI shielding (EMI SEmax = 89.12 dB with an ultralow reflectivity value of 0.19) and Joule heating (a high temperature of 103.5 °C at 4.5 V) performances. Besides, AMN films with embedded fabrics as a reinforcement structure achieved enhanced peel (1.97 N mm-1) and tensile (7.85 MPa) strengths through an interface enhancement process (plasma and pre-immersion treatments). In conclusion, this paper proposes a feasible paradigm to prepare flexible multifunctional conductive films, which demonstrate tremendous potential for applications in the wearable electronics and aerospace fields.

Cation Bimetallic MOF Anchored Carbon Fiber for Highly Efficient Microwave Absorption

Carbon fiber (CF) is a potential microwave absorption (MA) material due to the strong dielectric loss. Nevertheless, owing to the high conductivity, poor impedance matching of carbon-based  materials results in limited MA performance. How to solve this problem and achieve excellent MA performance remains a principal challenge. Herein, taking full advantage of CF and excellent impedance matching of bimetallic metal-organic frameworks (MOF) derivatives layer, an excellent microwave absorber based on micron-scale 1D CF and NiCoMOF (CF@NiCoMOF-800) is developed. After adjusting the oxygen vacancies of the bimetallic MOF, the resultant microwave absorber presented excellent MA properties including the minimum reflection loss (RLmin) of -80.63 dB and wide effective absorption bandwidth (EAB) of 8.01 GHz when its mass percent is only 5 wt.% and the thickness is 2.59 mm. Simultaneously, the mechanical properties of the epoxy resin (EP)-based coating with this microwave absorber are effectively improved. The hardness (H), elastic modulus (E), bending strength, and compressive strength of CF@NiCoMOF-800/EP coating are 334 MPa, 5.56 GPa, 82.2 MPa, and 135.8 MPa, which is 38%, 15%, 106% and 53% higher than EP coating. This work provides a promising solution for carbon materials achieving excellent MA properties and mechanical properties.

Wireless Powered Microwave-Light Conversion Platform with Dual-Stimulus Nanoresponder Coating for Deep-Seated Photodynamic Therapy

Traditional external field-assisted therapies, e.g., microwave (MW) therapy and phototherapy, cannot effectively and minimally damage eliminate deep-seated infection, owing to the poor penetrability of light and low reactive oxygen species (ROS) stimulation capability of MW. Herein, an implantable and wireless-powered therapeutic platform (CNT-FeTHQ-TS), in which external MW can be converted into internal light via MW wireless-powered light-emitting chips, is designed to eradicate deep-seated tissue infections by MW-induced deep-seated photodynamic therapy. In application, CNT-FeTHQ-TS is implanted at internal lesions, and the chip emits light under external MW irradiation. Subsequently, CNT-FeTHQ coating in the platform can respond to both MW and light simultaneously to generate ROS and MW-hyperthermia for rapid and precise sterilization at focus. Importantly, MW also improves the photodynamic performance of CNT-FeTHQ by introducing vacancies in FeTHQ to facilitate the photoexcitation process and changing the spin state of electrons to inhibit the complexation of photogenerated electron-hole pairs, which were confirmed by simulation calculations and in situ MW-irradiated photoluminescence experiments. In vivo, CNT-FeTHQ-TS can effectively cure mice with Staphylococcus aureus infection in dorsal subcutaneous tissue. This work overcomes the key clinical limitations of safe energy transmission and conversion for treating deep-seated infections.

Enhanced magnetic susceptibility in Ti3C2Tx MXene with Co and Ni incorporation

Magnetic nanomaterials are sought to provide new functionalities for applications ranging from information processing and storage to energy generation and biomedical imaging. MXenes are a rapidly growing family of two-dimensional transition metal carbides and nitrides with versatile chemical and structural diversity, resulting in a variety of interesting electronic and optical properties. However, strategies for producing MXenes with tailored magnetic responses remain underdeveloped and challenging. Herein, we incorporate elemental Ni and Co into Ti3C2Tx MXene by mixing with dilute metal chloride solutions. We achieve a uniform distribution of Ni and Co, confirmed by X-ray fluorescence (XRF) mapping with nanometer resolution, with Ni and Co concentrations of approximately 2 and 7 at% relative to the Ti concentration. The magnetic susceptibility of these Ni- and Co-incorporated Ti3C2Tx MXenes is one to two orders of magnitude larger than pristine Ti3C2Tx, illustrating the potential for dilute metal incorporation to enhance linear magnetic responses at room temperature.

MXene Hollow Spheres Supported by a C-Co Exoskeleton Grow MWCNTs for Efficient Microwave Absorption

High-performance microwave absorption (MA) materials must be studied immediately since electromagnetic pollution has become a problem that cannot be disregarded. A straightforward composite material, comprising hollow MXene spheres loaded with C-Co frameworks, was prepared to develop multiwalled carbon nanotubes (MWCNTs). A high impedance and suitable morphology were guaranteed by the C-Co exoskeleton, the attenuation ability was provided by the MWCNTs endoskeleton, and the material performance was greatly enhanced by the layered core-shell structure. When the thickness was only 2.04 mm, the effective absorption bandwidth was 5.67 GHz, and the minimum reflection loss (RLmin) was - 70.70 dB. At a thickness of 1.861 mm, the sample calcined at 700 °C had a RLmin of - 63.25 dB. All samples performed well with a reduced filler ratio of 15 wt%. This paper provides a method for making lightweight core-shell composite MA materials with magnetoelectric synergy.

Synthesis of Hierarchical CF@Fe3O4 Fibers Decorated with MoS2 Layers Forming Core-Sheath Microstructure toward Tunable and Efficient Electromagnetic Wave Absorption

Hierarchical structural design has been verified as a feasible strategy to fabricate effective electromagnetic wave (EMW) absorbers, so we designed hierarchical core-sheath composites with magnetic particles and dielectric layers. In this work, a hierarchical structure of carbon fiber (CF)@Fe3O4@MoS2 (CPDF7-M) was prepared by introducing Fe3O4 and depositing MoS2 layers on the surface of fibers. Due to the synergistic effects from the CF@Fe3O4 increasing the conductive and magnetic loss and the outer MoS2 layers improving the impedance matching, the optimal reflection loss (RL) value was -63.1 dB at 2.7 mm and the effective absorption bandwidth (EAB) was 9.1 GHz covering the X and Ku band. Moreover, the EAB values were adjusted with a specific MoS2 loading at different thicknesses, which provided the necessary reference for the construction of efficient and flexible absorbers in the EMW absorption fields.

Two-Dimensional Cr5Te8@Graphite Heterostructure for Efficient Electromagnetic Microwave Absorption

Two-dimensional (2D) transition metal chalcogenides (TMCs) hold great promise as novel microwave absorption materials owing to their interlayer interactions and unique magnetoelectric properties. However, overcoming the impedance mismatch at the low loading is still a challenge for TMCs due to the restricted loss pathways caused by their high-density characteristic. Here, an interface engineering based on the heterostructure of 2D Cr5Te8 and graphite is in situ constructed via a one-step chemical vapor deposit to modulate impedance matching and introduce multiple attenuation mechanisms. Intriguingly, the Cr5Te8@EG (ECT) heterostructure exhibits a minimum reflection loss of up to - 57.6 dB at 15.4 GHz with a thin thickness of only 1.4 mm under a low filling rate of 10%. The density functional theory calculations confirm that the splendid performance of ECT heterostructure primarily derives from charge redistribution at the abundant intimate interfaces, thereby reinforcing interfacial polarization loss. Furthermore, the ECT coating displays a remarkable radar cross section reduction of 31.9 dB m2, demonstrating a great radar microwave scattering ability. This work sheds light on the interfacial coupled stimulus response mechanism of TMC-based heterogeneous structures and provides a feasible strategy to manipulate high-quality TMCs for excellent microwave absorbers.

Room-temperature assembled 3D macro-porous Ti3C2Tx/RGO hybrid hydrogel and the application as the self-standing electrode for sodium-ion storage

Assembling two-dimensional (2D) MXene nanosheets into monolithic three-dimensional (3D) structures is an efficient pathway to transfer the nanoscale properties to practical applications. Nevertheless, the majority of the preparation schemes described in the literature are carried out at relatively high temperatures, which inevitably leads to the notorious high-temperature oxidation issue of MXenes. Preparing MXene-based hydrogels at lower temperatures or even room temperature is of great research importance. In this study, we report a novel and efficient room-temperature gelation method for fabricating 3D macro-porous Ti3C2Tx MXene/reduced graphene oxide (RGO) hybrid hydrogels, using anhydrous sodium sulfide (Na2S) as the primary reducing agent and l-cysteine as the auxiliary crosslinker. This room-temperature preparation technique successfully prevents the oxidation issue of MXenes and generates porous aerogels with excellent structural robustness after freeze-drying. As the self-standing anode for sodium-ion storage, the optimized 3D Ti3C2Tx MXene/RGO electrode possesses a specific capacity of 152 mAh/g at 0.1 A/g and good cycling stability with no significant capacity degradation after 500 cycles, which is significantly higher than that of the vacuum-filtered MXene film. This work demonstrates a straightforward room-temperature gelation method for constructing 3D MXene-based hydrogels to avoid the oxidation of MXenes, and casts new insight on the mechanism of the graphene oxide (GO)-assisted gelation.

State-of-the-art in carbides/carbon composites for electromagnetic wave absorption

Electromagnetic wave absorbing materials (EWAMs) have made great progress in the past decades, and are playing an increasingly important role in radiation prevention and antiradar detection due to their essential attenuation toward incident EM wave. With the flourish of nanotechnology, the design of high-performance EWAMs is not just dependent on the intrinsic characteristics of single-component medium, but pays more attention to the synergistic effects from different components to generate rich loss mechanisms. Among various candidates, carbides and carbon materials are usually labeled with the features of chemical stability, low density, tunable dielectric property, and diversified morphology/microstructure, and thus the combination of carbides and carbon materials will be a promising way to acquire new EWAMs with good practical application prospects. In this review, we introduce EM loss mechanisms related to dielectric composites, and then highlight the state-of-the-art progress in carbides/carbon composites as high-performance EWAMs, including silicon carbide/carbon, MXene/carbon, molybdenum carbide/carbon, as well as some uncommon carbides/carbon composites and multicomponent composites. The critical information regarding composition optimization, structural engineering, performance reinforcement, and structure-function relationship are discussed in detail. In addition, some challenges and perspectives for the development of carbides/carbon composites are also proposed after comparing the performance of some representative composites.

Structural design and preparation of Ti3C2Tx MXene/polymer composites for absorption-dominated electromagnetic interference shielding

Electromagnetic interference (EMI) is a pervasive and harmful phenomenon in modern society that affects the functionality and reliability of electronic devices and poses a threat to human health. To address this issue, EMI-shielding materials with high absorption performance have attracted considerable attention. Among various candidates, two-dimensional MXenes are promising materials for EMI shielding due to their high conductivity and tunable surface chemistry. Moreover, by incorporating magnetic and conductive fillers into MXene/polymer composites, the EMI shielding performance can be further improved through structural design and impedance matching. Herein, we provide a comprehensive review of the recent progress in MXene/polymer composites for absorption-dominated EMI shielding applications. We summarize the fabrication methods and EMI shielding mechanisms of different composite structures, such as homogeneous, multilayer, segregated, porous, and hybrid structures. We also analyze the advantages and disadvantages of these structures in terms of EMI shielding effectiveness and the absorption ratio. Furthermore, we discuss the roles of magnetic and conductive fillers in modulating the electrical properties and EMI shielding performance of the composites. We also introduce the methods for evaluating the EMI shielding performance of the materials and emphasize the electromagnetic parameters and challenges. Finally, we provide insights and suggestions for the future development of MXene/polymer composites for EMI shielding applications.

Boosting Interfacial Polarization Through Heterointerface Engineering in MXene/Graphene Intercalated-Based Microspheres for Electromagnetic Wave Absorption

Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption. However, avoiding agglomeration and achieving layer-by-layer ordered intercalation remain challenging. Here, 3D reduced graphene oxide (rGO)/MXene/TiO2/Fe2C lightweight porous microspheres with periodical intercalated structures and pronounced interfacial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell-Wagner effect. Such approach reinforced interfacial effects via defects introduction, porous skeleton, multi-layer assembly and multi-component system, leading to synergistic loss mechanisms. The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polarization charges while generating abundant polarization sites, resulting in boosted interfacial polarization, which is verified by CST Microwave Studio simulations. By precisely tuning the 2D nanosheets intercalation in the heterostructures, both the polarization loss and impedance matching improve significantly. At a low filler loading of 5 wt%, the polarization loss rate exceeds 70%, and a minimum reflection loss (RLmin) of -67.4 dB can be achieved. Moreover, radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres. These results not only provide novel insights into understanding and enhancing interfacial effects, but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.

Self-Healing MXene- and Graphene-Based Composites: Properties and Applications

Today, self-healing graphene- and MXene-based composites have attracted researchers due to the increase in durability as well as the cost reduction in long-time applications. Different studies have focused on designing novel self-healing graphene- and MXene-based composites with enhanced sensitivity, stretchability, and flexibility as well as improved electrical conductivity, healing efficacy, mechanical properties, and energy conversion efficacy. These composites with self-healing properties can be employed in the field of wearable sensors, supercapacitors, anticorrosive coatings, electromagnetic interference shielding, electronic-skin, soft robotics, etc. However, it appears that more explorations are still needed to achieve composites with excellent arbitrary shape adaptability, suitable adhesiveness, ideal durability, high stretchability, immediate self-healing responsibility, and outstanding electromagnetic features. Besides, optimizing reaction/synthesis conditions and finding suitable strategies for functionalization/modification are crucial aspects that should be comprehensively investigated. MXenes and graphene exhibited superior electrochemical properties with abundant surface terminations and great surface area, which are important to evolve biomedical and sensing applications. However, flexibility and stretchability are important criteria that need to be improved for their future applications. Herein, the most recent advancements pertaining to the applications and properties of self-healing graphene- and MXene-based composites are deliberated, focusing on crucial challenges and future perspectives.

Controllable Architecture of ZnO/FeNi Composites Derived from Trimetallic ZnFeNi Layered Double Hydroxides for High-Performance Electromagnetic Wave Absorbers

The optimization design of micro-structure and composition is an important strategy to obtain high-performance metal-based electromagnetic (EM) wave absorption materials. In this work, ZnO/FeNi composites derived from ZnFeNi layered double hydroxides are prepared by a one-step hydrothermal method and subsequent pyrolysis process, and can be employed as an effective alternative for high-performance EM wave absorber. A series of ZnO/FeNi composites with different structures are obtained by varying the molar ratios of Zn²⁺ /Fe³⁺ /Ni²⁺ , and the ZnO/FeNi composites with a Zn²⁺ /Fe³⁺ /Ni²⁺ molar ratio of 6:1:3 show a hierarchical flower-like structure. Owing to the strong synergistic loss mechanism of dielectric-magnetic components and favorable structural features, this hierarchical flower-like ZnO/FeNi sample supplies the optimal EM wave absorption performance with the highest reflection loss of -52.08 dB and the widest effective absorption bandwidth of 6.56 GHz. The EM simulation further demonstrates that impedance matching plays a determining role in EM wave absorption performance. This work provides a new way for the fabrication of a high-performance metal-based EM wave absorber.

Induced Crystallization-Controllable Nanoarchitectonics of 3D-Ordered Hierarchical Macroporous Co@N-Doped Carbon Frameworks for Enhanced Microwave Absorption

The construction of ordered hierarchical porous structures in metal-organic frameworks (MOFs) and their derivatives is highly promising to meet the low-density and high-performance demands of microwave absorption materials. However, traditional methods based on sacrificial templates or corrosive agents inevitably suffer from the collapse of the microporous framework and the accumulation of nanoparticles during the carbonization transformation, resulting in the deteriorating impedance match, which greatly limits the incident and attenuation of microwaves. Herein, an induced crystallization and controllable nanoarchitectonics strategy is employed to replace traditional growing-etching methods and successfully synthesize carbonized 3D-ordered macroporous Co@N-doped carbon (3DOM Co@NDC) based on the 3D-ordered template. The obtained 3D-ordered macroporous structure ensures the stable growth of hybrid carbon frameworks and CoC nanoparticles without collapse, preserves abundant interfaces for both the incident and attenuation performance, so as to significantly improve the impedance matching and absorption properties compared to conventional MOFs derivatives. The minimum reflection loss of 3DOM Co@NDC is -57.36 dB at the thickness of 1.9 mm, and the effective bandwidth is 7.36 GHz at 1.6 mm. Moreover, the innovative strategy to prepare 3D-ordered hierarchical macroporous structures opens up a new avenue for advanced MOFs-derived absorbers with excellent performance.

1D CNT-Expanded 3D Carbon Foam/Si3N4 Sandwich Heterostructure: Utilizing the Polarization Compensation Effect for Keeping Stable Electromagnetic Absorption Performance at Elevated Temperature

Modern electromagnetic (EM) absorbing materials (EAMs) are experiencing a revolution triggered by advanced information technology. Simultaneously, the diverse harsh EM application scenarios entail a more stringent appeal of practicability to EAMs, especially under high-temperature conditions. Therefore, exploring EAMs with both excellent absorbing performance and practicability at elevated temperatures is necessary. Herein, a novel 3D porous carbon foam/carbon nanotubes@Si₃N₄ (CF/CNTs@Si₃N₄) heterostructure was constructed by the chemical vapor infiltration process. The optimally grown 1D CNTs embedded in 3D CF/Si₃N₄ are utilized to provide abundant nanointerface coupling effects to compensate for the excessive increase in the conductive loss during rising temperature to realize a self-adjustment in response to high temperature. A high-efficiency EM absorption over a wide temperature range from 25 to 480 °C was achieved (with a ≥90% absorbing ratio covering the whole X-band). In addition, the Si₃N₄ coating can improve the thermal stability of the carbon matrix and maintain the tailored inner structure. Multiple investigations into other environmental adaptabilities also exhibited the application perspective of such a heterostructure. This work points out a new strategy for preparing designable, efficient, and high-temperature applicable EAMs, promoting the diverse development of electronic devices.