An Enzymatic Reaction Modulated Fluorescence-on Omethoate Biosensor Based on Fe3O4@GO and Copper Nanoparticles

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

The extraction of lithium (Li) from complex brines presents significant challenges due to the interference of competing ions, particularly magnesium (Mg2⁺), which complicates the selective separation process. Herein, a strategy is introduced employing charge-lock enhanced 2D heterogeneous channels for the rapid and selective uptake of Li⁺. This approach integrates porous ZnFe2O4/ZnO nanosheets into Ag+-modulated sub-nanometer interlayer channels, forming channels optimized for Li⁺ extraction. The novelty lies in the charge-lock mechanism, which selectively captures Mg2⁺ ions, thereby facilitating the effective separation of Li from Mg. This mechanism is driven by a charge transfer during the formation of ZnFe2O4/ZnO, rendering O atoms in Fe-O bonds more negatively charged. These negative charges strongly interact with the high charge density of Mg2⁺ ions, enabling the charge-locking mechanism and the targeted capture of Mg2⁺. Optimization with Ag⁺ further improves interlayer spacing, increasing ion transport rates and addressing the swelling issue typical of 2D membranes. The resultant membrane showcases high water flux (44.37 L m⁻2 h⁻¹ bar⁻¹) and an impressive 99.8% rejection of Mg2⁺ in real brine conditions, achieving a Li⁺/Mg2⁺ selectivity of 59.3, surpassing existing brine separation membranes. Additionally, this membrane demonstrates superior cyclic stability, highlighting its high potential for industrial applications.

Development of photoelectrochemical immunosensor based on halide perovskite protected by organometallic compounds for determining interleukin-17A (IL-17A)

The overexpression of interleukin-17A (IL-17A) is closely associated with the pathogenesis of autoimmune diseases and cancer, rendering precise identification of IL-17A level critical for disease diagnosis and prognosis monitoring. In this study, CsPbBr3 nanoclusters (NCs) were embedded in C16H14Br2O6Pb2 organometallic compound (Pb-MA MOC) via a hot injection approach. Through this way, the issue of CsPbBr3 NCs susceptible to decomposition in water was solved, and the photocurrent intensity that is generated by CsPbBr3 was significantly enhanced. A highly sensitive photoelectrochemical (PEC) sensor for detecting IL-17A in human serum was developed using CsPbBr3/Pb-MA as the photoactive material. The electrode was initially modified with CsPbBr3/Pb-MA. Then, antibody-modified Fe3O4 magnetic nanoparticles (MNs) with target analyte IL-17A captured, and IL-17A antibody-modified Au@CuNi diatomic catalyst (DAC) formed sandwich immune complex structure on the electrode. The existence of CuNi DAC led to a substantial reduction in photoelectric signal intensity due to oxidation of ascorbic acid in the supporting electrolyte. The photocurrent intensity exhibited linear correlation with IL-17A concentration within the range 15-750 pg/mL, and achieving an impressive detection limit of 1 pg/mL. Moreover, the sensor was successfully applied to the determination of IL-17A in human serum, suggesting its potential clinical applications.

Near-infrared light-driven lab-on-paper cathodic photoelectrochemical aptasensing for di(2-ethylhexyl)phthalate based on AgInS2/Cu2O/FeOOH photocathode

Di(2-ethylhexyl)phthalate (DEHP) is commonly released from plastics in aqueous environment, which can disrupt endocrine system and cause adverse effects on public health. There is a pressing need to highly sensitive detect DEHP. Herein, a near-infrared (NIR) light-driven lab-on-paper cathodic photoelectrochemical aptasensing platform integrated with AgInS2/Cu2O/FeOOH photocathode and "Y"-like ternary conjugated DNA nanostructure-mediated "ON-OFF" catalytic switching of hemin monomer-to-dimer was established for ultrasensitive DEHP detection. Profiting from the collaborative roles of the effective photosensitization of NIR-response AgInS2 and the fast hole extraction of FeOOH, the NIR light-activated AgInS2/Cu2O/FeOOH photocathode generated a markedly enhanced photocathodic signal. The dual hemin-labelled "Y"-like ternary conjugated DNA nanostructures made the hemin monomers separated in space and they maintained highly active to catalyze in situ generation of electron acceptors (O2). The hemin monomers were relocated in close proximity with the help of target-induced allosteric change of DNA nanostructures, which could spontaneously dimerize into catalytically inactive hemin dimers and fail to mediate electron acceptors generation, resulting in a decreased photocathodic signal. Therefore, the ultrasensitive DEHP detection was realized with a linear response range of 1 pM-500 nM and a detection limit of 0.39 pM. This work rendered a promising prototype to construct powerful paper-based photocathodic aptasensing system for sensitive and accurate screening of DEHP in aqueous environment.

Detection of botulinum neurotoxin A (BoNT/A) enzymatic activity by pregnancy test strips based on hCG-modified magnetic nanoparticles

The detection of botulinum neurotoxin A (BoNT/A) endopeptidase activity by pregnancy test paper based on human chorionic gonadotropin (hCG)-functionalized peptide-modified magnetic nanoparticles (MNs) is described for the first time. HCG-functionalized SNAP-25 peptide substrate with hydrolysis recognition sites was optimally designed. HCG can be recognized by pregnancy test strips. BoNT/A light chain (BoNT-LcA) is the central part of the endopeptidase function in holotoxin, which can specifically hydrolyze SNAP-25 peptide to release the hCG-peptide probe, and the hCG-peptide probe released can be quantitatively detected by pregnancy test strips, achieving indirect determination of BoNT/A. By quantifying the T-line color intensity of test strips, the visual detection limit for BoNT-LcA is 12.5 pg/mL, and the linear range of detection for BoNT-LcA and BoNT/A holotoxin was 100 pg/mL to 1 ng/mL and 25 to 250 ng/mL. The ability of the method to quantify BoNT/A was validated in human serum samples. This method shows the potential for sensitive detecting BoNT/A and has prospects for the diagnosis and prognosis of clinical botulism.

Double-enzyme active MnO2@BSA mediated lab-on-paper dual-modality aptasensor for di(2-ethylhexyl)phthalate

Di(2-ethylhexyl)phthalate (DEHP), as an environmental endocrine disruptor, has adverse effects on eco-environments and health. Thus, it is crucial to highly sensitive on-site detect DEHP. Herein, a double-enzyme active MnO2@BSA mediated dual-modality photoelectrochemical (PEC)/colorimetric aptasensing platform with the cascaded sensitization structures of ZnIn2S4 and TiO2 as signal generators was engineered for rapid and ultrasensitive detection of DEHP using an all-in-one lab-on-paper analytical device. Benefitting from cascaded sensitization effect, the ZnIn2S4/TiO2 photosensitive structures-assembled polypyrrole paper electrode gave an enhanced photocurrent signal. The MnO2@BSA nanoparticles (NPs) with peroxidase-mimic and oxidase-mimic double-enzymatic activity induced multiple signal quenching effects and catalyzed color development. Specifically, the MnO2@BSA NPs acted as peroxidase mimetics to generate catalytic precipitates, which not only obstructed interfacial electron transfer but also served as electron acceptors to accept photogenerated electrons. Besides, the steric hindrance effect from MnO2@BSA NPs-loaded branchy polymeric DNA duplex structures further decreased photocurrent signal. The target recycling reaction caused the detachment of MnO2@BSA NPs to increase PEC signal, realizing the ultrasensitive detection of DEHP with a low detection limit of 27 fM. Ingeniously, the freed MnO2@BSA NPs flowed to colorimetric zone with the aid of fluid channels and acted as oxidase mimetics to induce color intensity enhancement, resulting in the rapid visual detection of DEHP. This work provided a prospective paradigm to develop field-based paper analytical tool for DEHP detection in aqueous environment.

Deep eutectic solvents in sample preparation and determination methods of pesticides: Recent advances and future prospects

This review summarizes recent advances of deep eutectic solvents (DESs) in sample preparation and determination methods of pesticides in food, environmental, and biological matrices since 2019. Emphasis is placed on new DES categories and emerging microextraction techniques. The former incorporate hydrophobic deep eutectic solvents, magnetic deep eutectic solvents, and responsive switchable deep eutectic solvents, while the latter mainly include dispersive liquid-liquid microextraction, liquid-liquid microextraction based on in-situ formation/decomposition of DESs, single drop microextraction, hollow fiber-liquid phase microextraction, and solid-phase microextraction. The principles, applications, advantages, and limitations of these microextraction techniques are presented. Besides, the use of DESs in chromatographic separation, electrochemical biosensors, fluorescent sensors, and surface-enhanced Raman spectroscopy are discussed. This review is expected to provide a valuable reference for extracting and detecting pesticides or other hazardous contaminants in the future.

Selective detection of carbendazim using a upconversion fluorescence sensor modified by biomimetic molecularly imprinted polymers

The persistence of carbendazim residues in the food chain poses a potential risk to human health. Therefore, an eco-friendly selective and sensitive fluorescence nanosensor was established for carbendazim determination based on molecularly imprinted polymer (MIP) modified upconversion nanoparticles (UCNPs). The molecularly imprinted coating with methacrylamide as a functional monomer and carbendazim as a template molecule grafted on the UCNPs (UCNPs@MIP) constituted fluorescent recognition elements. The fluorescence emission of UCNPs@MIP significantly declined in the presence of carbendazim due to electron transfer induced by its selective binding with MIP cavities. The quenched fluorescence of UCNPs@MIP was recovered once the template carbendazim was eluted from the probe system. Under the optimized conditions, the proposed method offers a good linear correlation between 0.01 and 1 μg/mL, with a limit of detection (LOD) of 0.0036 μg/mL for carbendazim residues. The analytical utility and reliability of the developed biomimetic platform were examined in real food samples with good recoveries (88.790%∼102.675%) and relative standard deviation (RSD) values (0.491%∼3.779%). The method was further validated by a standard HPLC method in terms of student's t-test (p > 0.05) with no significant differences between the two methods. Hence, the proposed fluorescence sensor has prospects for rapid determination of carbendazim.

Homogeneous photoelectrochemical biosensor for sensitive detection of omethoate via ALP-mediated pesticide assay and Bi2S3@Bi2Sn2O7 heterojunction as photoactive material

A simple homogeneous photoelectrochemical (PEC) sensing platform based on an alkaline phosphatase (ALP)-mediated pesticide assay was established for the sensitive detection of omethoate (OM). The Bi₂S₃@Bi₂Sn₂O₇ heterojunction was used as a photoactive material to provide stable background photocurrent signals. The inhibition of OM on ALP and PEC determination was carried out in the homogeneous system. In the absence of OM, dephosphorylation of L-ascorbic acid 2-phosphate trisodium salt (AAP) was catalyzed by ALP to produce the enzyme-catalyzed product (L-ascorbic acid, AA). AA, as an electron donor, could capture photogenerated holes on the Bi₂S₃@Bi₂Sn₂O₇ heterojunction, thus inhibiting the recombination of electron holes to achieve an increase of the photocurrent signal. When the OM was introduced, the enzyme activity of ALP was reduced due to the organophosphorus pesticides (OPs)-based enzyme inhibition, and the AA produced by catalytic hydrolysis was also reduced, thus reducing the photocurrent signal. Compared with the traditional PEC sensor for OPs, this homogeneous PEC sensor avoided immobilization procedures, covalent labeling, separation, and the steric hindrance effect caused by immobilized biomolecules, which achieved high recognition efficiency and caused a reduction in analysis time. Additionally, an ALP-mediated pesticide assay for the determination of OPs with a simplified experimental process further improved the stability and reproducibility of the PEC sensor. The PEC sensor showed high sensitivity to the target OM within a dynamic range of 0.05 ~ 500 ng mL^-1, and the detection limit was 0.0146 ng mL^-1. Additionally, the PEC biosensing system showed good selectivity and anti-interference ability, and exhibited a satisfactory result in spinach and mustard samples. A homogeneous PEC biosensor based on ALP inhibition strategy was constructed for OM detection in vegetable samples via Bi₂S₃@Bi₂Sn₂O₇ heterojunction as the photoactive substrate material.

Dual-strategy biosensing of glucose based on multifunctional CuWO4 nanoparticles

The multifunctional CuWO4 NPs were prepared and exhibit large specific surface area, good conductivity and excellent peroxidase-like activity, which was exploited for electrochemical and colorimetric dual-strategy biosensing of glucose.