Choline chloride-based deep eutectic solvents as plasticizer and active agent in chitosan films

The growing concern over extending the shelf life of food products, coupled with the escalating environmental impact of synthetic plastic waste, has fuelled a quest for bio-based alternatives in packaging research. In response to this pressing need, our study delves into the synthesis of chitosan-based films incorporating a deep eutectic solvents (DES). Choline chloride and diverse hydrogen bond donors were used as plasticizers, we also explored the active properties of DES integrated into the chitosan (Ch) matrix. The Ch-based films with chlorine chloride: citric acid can prevent the mold spotting up to 29 days longer in comparison to bread wrapped in polyethylene films (PE). The obtained Ch/DES films exhibited mechanical properties comparable to conventional PE (e.g., up to tensile strength of 26 MPa and up to 210% in case of elongation at break). This synthesis approach represents a significant stride towards environmentally friendly packaging materials, aligning with the principles of green chemistry.

'Kent') pulp: Ultrasound assisted extraction and green solvents

Mango is a good source of carotenoids for use in food, cosmetic, and pharmaceutical products because of their organoleptic and health-promoting properties. Safe and sustainable methods for their extraction is required. The present investigation was aimed to study concentration and carotenoid profile of 'Kent' mango pulp through a conventional extraction (CE) and ultrasound-assisted extraction (UAE) using traditional solvents (tetrahydrofuran-THF and diethyl ether: petroleum ether-DE:PE) and green solvents (GS) (2-metiltetrahydrofuran, 2 m-THF; cyclopentyl methyl ether, CPME). Mango showed (μg/g d.w.) β-carotene (29.4), zeaxanthin (1.28), β-cryptoxanthin (2.8), phytoene (18.68) and phytofluene (7.45) in a CE using DE:PE. Similar results were obtained applying DE:PE in UAE and GS in a CE, so CPME and 2-mTHF seem suitable solvents to replace DE:PE in CE. The yield of total carotenes, xanthophylls and carotenoids using GS combined with UAE was lower than with CE, but important enough to be used as a sustainable procedure for obtaining carotenoids from mango pulp.

Polyhydroxyalkanoate recovery overview: properties, characterizations, and extraction strategies

Due to their excellent properties, polyhydroxyalkanoates are gaining increasing recognition in the biodegradable polymer market. These biogenic polyesters are characterized by high biodegradability in multiple environments, overcoming the limitation of composting plants only and their versatility in production. The most consolidated techniques in the literature or the reference legislation for the physical, chemical and mechanical characterisation of the final product are reported since its usability on the market is still linked to its quality, including the biodegradability certificate. This versatility makes polyhydroxyalkanoates a promising prospect with the potential to replace fossil-based thermoplastics sustainably. This review analyses and compares the physical, chemical and mechanical properties of poly-β-hydroxybutyrate and poly-β-hydroxybutyrate-co-β-hydroxyvalerate, indicating their current limitations and strengths. In particular, the copolymer is characterised by better performance in terms of crystallinity, hardness and workability. However, the knowledge in this area is still in its infancy, and the selling prices are too high (9-18 $ kg-1). An analysis of the main extraction techniques, established and in development, is also included. Solvent extraction is currently the most widely used method due to its efficiency and final product quality. In this context, the extraction phase of the biopolymer production process remains a major challenge due to its high costs and the need to use non-halogenated toxic solvents to improve the production of good-quality bioplastics. The review also discusses all fundamental parameters for optimising the process, such as solubility and temperature.

A systematic review on green and natural polymeric nanofibers for biomedical applications

Electrospinning is the simplest technique to produce ultrathin nanofibers, which enables the use of nanotechnology in various applications. Nanofibrous materials produced through electrospinning have garnered significant attention in biomedical applications due to their unique properties and versatile potential. In recent years, there has been a growing emphasis on incorporating sustainability principles into material design and production. However, electrospun nanofibers, owing to their reliance on solvents associated with significant drawbacks like toxicity, flammability, and disposal challenges, frequently fall short of meeting environmentally friendly standards. Due to the limited solvent choices and heightened concerns for safety and hygiene in modern living, it becomes imperative to carefully assess the implications of employing electrospun nanofibers in diverse applications and consumer products. This systematic review aims to comprehensively assess the current state of research and development in the field of "green and natural" electrospun polymer nanofibers as well as more fascinating and eco-friendly commercial techniques, solvent preferences, and other green routes that respect social and legal restrictions tailored for biomedical applications. We explore the utilization of biocompatible and biodegradable polymers sourced from renewable feedstocks, eco-friendly processing techniques, and the evaluation of environmental impacts. Our review highlights the potential of green and natural electrospun nanofibers to address sustainability concerns while meeting the demanding requirements of various biomedical applications, including tissue engineering, drug delivery, wound healing, and diagnostic platforms. We analyze the advantages, challenges, and future prospects of these materials, offering insights into the evolving landscape of environmentally responsible nanofiber technology in the biomedical field.

Dimethyl carbonate as a green alternative to acetonitrile in reversed-phase liquid chromatography. Part II: Purification of a therapeutic peptide

Preparative liquid chromatography in reversed phase conditions (RPLC) is the most common approach adopted in the downstream processing for the purification of therapeutic peptides at industrial level. Due to the strict requirements on the quality imposed by the Regulatory Agencies, routinary methods based on the use of aqueous buffers and acetonitrile (ACN) as organic modifier are commonly used, where ACN is practically the only available choice for the purification of peptide derivatives. However, ACN is known to suffers of many shortcomings, such as drastic shortage in the market, high costs and, most importantly, it shows unwanted toxicity for human health and environment, which led it among the less environmentally friendly ones. For this reason, the selection of a suitable alternative becomes crucial for the sustainable downstream processing of peptides and biopharmaceuticals in general. In this paper, a promising green solvent, namely dimethyl carbonate (DMC) has been used for the separation of a peptide not only in linear conditions but also for its purification through non-linear overloaded chromatography. The performance of the process has been compared to that achievable with the common method where ACN is used as organic modifier and to that obtained with two additional solvents (namely ethanol and isopropanol), already used as greener alternatives to ACN. This proof-of-concept study showed that, thanks to its higher elution strength, DMC can be considered a green alternative to ACN, since it allows to reduce method duration while reaching good purities and recoveries. Indeed, at a target purity fixed to 98.5 %, DMC led to the best productivity with respect to all the other solvents tested, confirming its suitability as a sustainable alternative to ACN for the purification of complex biopharmaceutical products.

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

Deep eutectic solvents in sample preparation and determination methods of pesticides: Recent advances and future prospects

This review summarizes recent advances of deep eutectic solvents (DESs) in sample preparation and determination methods of pesticides in food, environmental, and biological matrices since 2019. Emphasis is placed on new DES categories and emerging microextraction techniques. The former incorporate hydrophobic deep eutectic solvents, magnetic deep eutectic solvents, and responsive switchable deep eutectic solvents, while the latter mainly include dispersive liquid-liquid microextraction, liquid-liquid microextraction based on in-situ formation/decomposition of DESs, single drop microextraction, hollow fiber-liquid phase microextraction, and solid-phase microextraction. The principles, applications, advantages, and limitations of these microextraction techniques are presented. Besides, the use of DESs in chromatographic separation, electrochemical biosensors, fluorescent sensors, and surface-enhanced Raman spectroscopy are discussed. This review is expected to provide a valuable reference for extracting and detecting pesticides or other hazardous contaminants in the future.

Green extraction of polysaccharides from Camellia oleifera fruit shell using tailor-made deep eutectic solvents

Camellia oleifera fruit shells are often discarded as byproducts in the C. oleifera industry. There is a general interest in isolating high-value natural products to valorize those fruit shells with green, rapid, and effective extraction methods. This study employed 43 combinations of deep eutectic solvents (DESs) to extract polysaccharides from C. oleifera fruit shells. Two choline chloride-based DESs and a ternary DES with propionic acid and 1,3-butanediol as hydrogen bond donors exhibited relatively high extraction efficiency. The polysaccharide yield reached 15.03 ± 0.35 % under optimized extraction time (55 min), extraction temperature (70 °C), and DES water content (33.33 %). The physicochemical composition and preliminary structure of obtained polysaccharides were characterized. Additionally, DESs-extracted polysaccharides exhibited higher in vitro antioxidant activities and hypoglycemic effects compared to water-extracted polysaccharides. These findings suggested that the optimized DES-assisted extraction method could be a potential approach for polysaccharides extraction from C. oleifera.

Neutral natural deep eutectic solvents as anti-biofilm agents

Natural deep eutectic solvents (NADES) are a class of liquids with promising properties as components in pharmaceutical formulations, such as a low toxicity profile, biodegradability and versatility. Recently, their potential use as anti-biofilm agents has been proposed, due to their ability to solubilize and stabilize biological macromolecules. In the current work, the ability to break down biofilm matrix and the biofilm killing activity of three NADES of neutral pH were investigated against Staphylococcus aureus ATCC 6538 and Pseudomonas aeruginosa ATCC 9027 biofilms. The tested NADES were choline chloride:xylitol (ChX), choline chloride:glycerol (ChG) and betaine:sucrose (BS). Two of the NADES (ChX and ChG) significantly reduced the number of remaining viable cells of both bacterial species in pre-formed biofilm by 4-6 orders of magnitude, while the average biofilm biomass removal for all NADES was 27-67% (S. aureus) and 34-49% (P. aeruginosa). The tested NADES also inhibited biofilm formation of both bacterial species at concentrations at or below 0.5 x the minimal inhibitory concentration (MIC), possibly in part due to observed restrictions imposed by NADES on planktonic growth. These results demonstrate the potential value of neutral NADES as anti-biofilm agents in future antimicrobial preparations.

A green method to extract rutin from Sophora japonica L

Sophora japonica L. contains high levels of rutin, which has great potential for use in pharmaceutical products for the treatment of diseases related to the cardiovascular and circulatory systems. We proposed a method of extracting rutin from S. japonica by using a green solvent.•Green deep eutectic solvents (DESs) of choline chloride and ethylene glycol (ChCl-Eth) showed the highest extraction efficiency of rutin from S. japonica.•Under optimal conditions, the extraction yield of ChCl-Eth was 1.34 times higher than that of methanol as solvent.•Rutin was recovered from the DES extracts using water as the antisolvent with a high recovery yield, and the DESs of ChCl-Eth could be productively recovered and reused at least 3 times.

Ionic liquid-based dispersive liquid-liquid microextraction of succinic acid from aqueous streams: COSMO-RS screening and experimental verification

AbstractIn the present investigation, a total of 108 combinations of ionic liquids (ILs) were screened using the conductor-like screening model for real solvents (COSMO-RS) with the aid of six cations and eighteen anions for the extraction of succinic acid (SA) from aqueous streams through dispersive liquid-liquid microextraction (DLLME). Using the screened ILs, an ionic liquid-based DLLME (IL-DLLME) was developed to extract SA and the role of different reaction parameters in the effectiveness of IL-DLLME approach was investigated. COSMO-RS results suggested that, quaternary ammonium and choline cations form effective IL combinations with [OH], [F], and [SO₄²] anions due to hydrogen bonding. In view of these results, one of the screened ILs, tetramethylammonium hydroxide [TMAm][OH] was chosen as the extractant in IL-DLLME process and acetonitrile was adopted as the dispersive solvent. The highest SA removal efficiency of 97.8% was achieved using 25 μL of IL [TMAm][OH] as a carrier and 500 μL of acetonitrile as dispersive solvent. The highest amount of SA was extracted with a stir time of 20 min at 300 rpm, followed by centrifugation for 5 min at 4500 rpm. Overall, the findings showed that IL-DLLME is efficient in extracting succinic acid from aqueous environments while adhering to the first-order kinetics.

Natural deep eutectic solvents for Ultrasonic-Assisted extraction of nutritious date Sugar: Molecular Screening, Experimental, and prediction

The aim of this study is to develop an environmentally friendly and effective method for the extraction of nutritious date sugar using natural deep eutectic solvents (NADES) and ultrasound-assisted extraction (USAE). The careful design of a suitable NADES-USAE system was systematically supported by COSMO-RS screening, response surface method (RSM) and artificial neural network (ANN). Initially, 26 natural hydrogen bond donors (HBDs) were carefully screened for sugar affinity using COSMO-RS. The best performing HBDs were then used for the synthesis of 5 NADES using choline chloride (ChCl) as HBA. Among the synthesized NADES, the mixture of ChCl, citric acid (CA) and water (1:1:1 with 20 wt% water) resulted in the highest sugar yield of 78.30 ± 3.91 g/100 g, which is superior to conventional solvents such as water (29.92 ± 1.50 g/100 g). Further enhancements using RSM and ANN led to an even higher sugar recovery of 87.81 ± 2.61 g/100 g, at conditions of 30 °C, 45 min, and a solvent to DFP ratio of 40 mL/g. The method NADES-USAE was then compared with conventional hot water extraction (CHWE) (61.36 ± 3.06) and showed 43.1% higher sugar yield. The developed process not only improves the recovery of the nutritious date sugar but also preserves the heat-sensitive bioactive compounds in dates, making it an attractive alternative to CHWE for industrial utilization. Overall, this study shows a promising approach for the extraction of nutritive sugars from dates using environmentally friendly solvents and advanced technology. It also highlights the potential of this approach for valorizing underutilized fruits and preserving their bioactive compounds.

Choline chloride-based deep eutectic solvent as an inhibitor of metalloproteases (collagenase and elastase) in cosmetic formulation

Green chemistry and engineering are potential alternatives for achieving higher sustainability and lower generation of hazardous compounds in chemical product design, production, and use. Deep Eutectic Solvents (DES) are characterized as green solvents and have become increasingly attractive due to their characteristic design solvents. In this work, two DES (choline chloride (ChCl)/glycerol and ChCl/Urea), aqueous solutions of the DES-forming components, and green tea extracts obtained with DES were used as anti-ageing active in cosmetic products using in vitro tests to inhibit extracellular matrix metalloproteases (such as collagenase and elastase). Finally, the stability of the formulations with DES as a cosmetic active was also evaluated. The results showed that DES based on ChCl/Urea and ChCl/glycerol exhibited remarkable inhibition values of collagenase (91.1 and 92.7%, respectively) and elastase (49.8 and 45.7%, respectively). However, pure urea displayed better inhibition values (66%) for elastase, possibly due to its direct contribution to intramolecular hydrogen bonds. ChCl/glycerol showed remarkable stability in the average cube diameter values, which may indicate no change in the conformation of the micellar structure of the cosmetic formulation. Moreover, the formulation containing this DES remained stable at room temperature. Given the remarkable results, DES can be applied in cosmetic products for anti-ageing purposes.

Insights into chitosan-based cellulose nanowhiskers reinforced nanocomposite material via deep eutectic solvent in green chemistry

In the present work, the synthesis of cellulose nanowhiskers (CNW)/chitosan nanocomposite films via deep eutectic solvents (DES) changing the chemical structures were carried out. It was observed that a pure chitosan film has broadband at 3180-3400 cm^-1, indicating amide and hydroxyl groups. Upon CNW incorporation, the peak gets sharper and stronger and shifts to a greater wavelength. Further, the addition of DES infuses more elements of amide into the nanocomposite films. Moreover, the mechanical properties incorporating CNW filler into a chitosan matrix show an enhancement in tensile strength (TS), Young's modulus (YM), and elongation at break. The TS and YM increase while the elongation decrease as the CNW concentration increases. The YM of biocomposite films is increased to 723 MPa at 25% CNW into chitosan films. Besides, the TS has enhanced to 11.48 MPa at 15% CNW concentration in the biocomposite films. The elongation at break has decreased to 11.7% at 25% CNW concentration. Hence, incorporating CNW into the chitosan matrix via DES can still improve the mechanical properties of the nanocomposite films. Therefore, the application of DES results in a lower YM and TS as the films are hygroscopic. In conclusion, DES can be considered the new green solvent media for synthesizing materials. It has the potential to replace ionic liquids due to its biodegradability and non-toxic properties while preserving the character of low-vapour pressure. Besides that, chitosan can be used as potential material for applications in process industries, such as the biomedical and pharmaceutical industries. Thus, DES can be used as a green solvent and aim to reduce the toxic effect of chemicals on the environment during chemical production.

Combining environmental, health, and safety features with a conductor like Screening Model for selecting green solvents for antibiotic analyses

Extraction and chromatographic techniques for analyzing pharmaceutically active compounds necessitate large quantities of organic solvents, resulting in a high volume of hazardous waste. The concept of green solvents focuses on protecting the environment by reducing or even eliminating the use of toxic solvents. The main objective of this critical review article is to build a framework for choosing green solvents for antibiotic analyses. The article briefly discusses the chemical properties of ciprofloxacin, sulfamethoxazole, tetracycline, and trimethoprim, and the current state of methodologies for their analyses in water and wastewater. It evaluates the greenness of solvents used for antibiotic analyses and includes insights on the comparison between conventional and green solvents for the analyses. An economic and environmental health and safety analysis combined with a Conductor-like Screening Model for Real Solvent (COSMO-RS) molecular simulation technique for predicting extraction efficiency was used in the evaluation. Methyl acetate and propylene carbonate tied for the greenest solvents from an environmental and economic perspective, whereas the COSMO-RS approach suggests dimethyl sulfoxide (DMSO) as the most suitable candidate. Although DMSO ranked third environmentally and economically, after methyl acetate and propylene carbonate, it would be an ideal replacement of hazardous solvents if it could be manufactured at a lower cost. DMSO showed the highest extraction capacity, as it can interact with antibiotics through hydrophobic interaction and hydrogen bonding. This article can be used as a green solvent selection guide for developing sustainable processes for antibiotic analyses.

Process intensification strategies for green solvent mediated biomass pretreatment

Demonstrated to be highly effective for lignocellulosic biomass pretreatment, deep eutectic solvent (DES) has attracted increasing attention owing to its advantages of simple synthesis, relatively low chemical cost, and better biocompatibility as compared to certain ionic liquids. Here we provide a critical review of the status of the design/selection of DES for the pretreatment of biomass feedstocks with an emphasis on the process intensification strategies: 1) integration of microwave, ultrasound, and high solid extrusion for pretreating biomass, 2) one-pot DES pretreatment, enzymatic hydrolysis, and fermentation, 3) strategies for DES recycling and product recovery; and 4) recent progress on molecular simulations toward understanding the interactions between DES and biomass compounds such as lignin and cellulose. Lastly, we provide perspectives toward cost-effective, continuous, high-solid, environmental-benign, and industrial-relevant applications and point to future research directions to address the challenges associated with DES pretreatment.

Uncovering biodegradability and biocompatibility of betaine-based deep eutectic systems

Deep eutectic systems (DES) have shown increasing popularity in last decade; however, the number of studies on the potential toxicity towards living organisms remains scarce. These studies are of the utmost importance to infer on the claimed non-toxicity and biocompatibility of DES. Most articles published, at this moment, only evaluate the toxicity towards a cell model or in different strains of bacteria. For this purpose, in this work, the effect of two DES (betaine:sorbitol:water 1:1:3 and betaine:glycerol 1:2) and their individual components were evaluated at different concentrations after administered via intraperitoneal injection in zebrafish (Danio rerio). The total antioxidant capacity, lipoperoxidation, and the activity of various enzymes that work in different antioxidant pathways (superoxide dismutase, glutathione peroxidase, catalase, and glutathione S-transferase) were assessed. The results show no significant toxicity within the tested concentrations: up to 5000 µM and 3000 µM, for the assays using the system betaine:sorbitol:water 1:1:3 and for betaine:glycerol 1:2, respectively. The toxicity of individual components was studied up to 1000 µM. Based on the encouraging results that have been obtained, it is safe to conclude that these two deep eutectic systems can be used as the new class of environmentally friendly solvents.

Biocatalysis of Steroids by Mycobacterium sp. in Aqueous and Organic Media

Mycobacterium sp. can convert steroids such as β-sitosterol, campesterol, and cholesterol, by selective side-chain cleavage and oxidation of the C3 hydroxyl group to a ketone, into key intermediates that can be easily functionalized to yield commercially interesting pharmaceutical products. In aqueous systems, the biocatalysis is limited by the low solubility of the steroids in water. Several strategies have been introduced to tackle this limitation, e.g., formation of cyclodextrin-steroid complexes and generation of aqueous microdispersions with steroid particle size in the range of hundreds of nanometers. Still, the introduction of an organic phase acting as a substrate and/or product reservoir is a well-established and relatively easy to implement strategy to overcome the sparing water solubility of steroid molecules. However, the organic phase has to be carefully chosen to prevent tampering with the activity/viability of microbial cells.In this chapter, we describe the methodology for the biocatalysis of β-sitosterol to 4-androstene-3,17-dione (AD) and 1,4-androstadiene-3,17-dione (ADD), both in aqueous and organic:aqueous systems. In the latter case, both traditional organic solvents and green solvents are proposed.

Valorization of coffee pulp as bioactive food ingredient by sustainable extraction methodologies

Coffee pulp is an underutilized by-product of coffee industrial production rich in bioactive compounds such as phenolic compounds, caffeine, and dietary fiber. The widely known antioxidant, anti-inflammatory, anti-aging, antimicrobial and hepatoprotective health-promoting properties attributed to mentioned compounds enhance the use of coffee pulp as a bioactive food ingredient. Furthermore, the application of green sustainable extraction techniques pursuing highly efficient and selective extraction processes promotes this by-product exploitation in food science. Hence, this review gathers the available information relative to the impact of the extraction processes on the bioactive compound's recovery from coffee pulp, providing an overview of the most recent advances. An in-depth comparison workout between conventional and alternative extraction methods was performed to identify the most suitable techniques for coffee pulp valorization as functional ingredient until date. A critical discussion focused on advantages and drawbacks of the extraction methods applied to coffee pulp was included together a prospective of emerging extraction techniques.

Microwave hydrodiffusion and gravity model with a unique hydration strategy for exhaustive extraction of anthocyanins from strawberries and raspberries

This study aimed to verify if microwave hydrodiffusion and gravity (MHG) could efficiently extract anthocyanins from strawberries and raspberries with low environmental impact and costs. Our findings revealed that it was possible to extract 69 and 64% anthocyanins from the strawberries and raspberries in a single extraction step, respectively. When the co-product (product remaining after extracting in natura fruits) was hydrated with green solvents and subjected to re-extraction, it was possible to exhaustively extract the anthocyanins from both fruits. Using the Green Analytical Procedure Index (GAPI), the MHG proved to cause low environmental impact due to the solvents used, enabling the reuse of the co-product for food and pharmaceutical products application. Moreover, the MHG was economically viable, and the sample pretreated with distilled water was the most indicated re-extraction method. The MHG process proved to be exhaustive for strawberry and raspberry anthocyanins, thus demonstrating to be an excellent alternative for sustainable extraction.

One-step sustainable extraction of Silymarin compounds of wild Algerian milk thistle (Silybum marianum) seeds using Gas Expanded Liquids

This work reports the application of Gas Expanded Liquid (GXL) extraction to concentrate the flavonolignan fraction (silymarin) and taxifolin from Silybum marianum seeds, which have proven to be highly valuable health-promoting compounds. GXL using green solvents was used to isolate silymarin with the objective of replacing conventional methods. In one hand, the effect of different compositions of solvents, aqueous ethanol (20%, 50% or 80% (v/v)) at different CO2/liquid (25, 50 and 75%) ratios, on the GXL extraction was investigated. The obtained extracts have been chemically and functionally characterized by means of UHPLC-ESI-MS/MS (triple quadrupole) and in-vitro assays such as anti-inflammatory, anti-cholinergic and antioxidant. Results revealed that the operating conditions influenced the extraction yield, the total phenolic content and the presence of the target compounds. The best obtained yield was 55.97% using a ternary mixture of solvents composed of CO2:EtOH:H2O (25:60:15) at 40 °C and 9 MPa in 160 min. Furthermore, the results showed that obtained extracts had significant antioxidant and anti-inflammatory activities (with best IC50 value of 8.80 µg/mL and 28.52 µg/mL, respectively) but a moderate anti-cholinesterase activity (with best IC50 value of 125.09 µg/mL). Otherwise, the concentration of silymarin compounds in extract can go up to 59.6% using the present one-step extraction method without further purification, being silybinA+B the predominant identified compound, achieving value of 545.73 (mg silymarin/g of extract). The obtained results demonstrate the exceptional potential of GXL to extract high-added values molecules under sustainable conditions from different matrices.

Assessment of deep eutectic solvents toxicity in zebrafish (Danio rerio)

Deep Eutectic Systems (DES) have emerged as a "green alternative" to organic solvents and have been coined as biocompatible and biodegradable. However, the number of studies concerning the real biodegradability and biocompatibility are scarce. Thus, to study the toxicity of certain DES, two different approaches were used: i) zebrafish exposure via water, where the system (DES) was tested at potentially realistic environmental concentrations and ii) via intraperitoneal injection, where the system was tested in different concentrations, relevant to the pharmaceutical industry. These studies were performed using zebrafish, a standardized animal model often used in biomedicine and toxicological assays. The results show low toxicity according to tested concentrations (up to 73.47 μM), when the system CA:T:W, with a 2:1:3 molar ratio, was tested through exposure via water and also in the intraperitoneal injection tests with concentrations up to 6000 μM. The activity of different enzymes involved in antioxidant pathways (glutathione S-transferase, catalase, glutathione peroxidase), the total antioxidant capacity (TAC) and lipoperoxidation (MDA content) were determined suggesting low toxicity of the tested system (DES). The promising results herein presented show that DES present the potential to be used as the new class of green solvents, not only for use in the pharmaceutical industry, but also in cosmetic and chemical engineering processes without causing negative impact on living organisms.

Greenness of lab-on-a-chip devices for analytical processes: Advances & future prospects

Lab-on-a-chip devices have now-a-days become an important aspect of analytical/bioanalytical chemistry having wide range of applications including clinical diagnosis, drug screening, cell biology, environmental monitoring, food safety analysis etc. Conventional lab-on-a-chip devices generally employ chemicals that are not environmentally friendly and were commonly fabricated on hard plastic platform which are non-degradable and hence ignore the importance of green analytical chemistry. In today's scenario, it is highly imperative to protect our environment by using less toxic and environmentally friendly chemicals/solvents and biocompatible platforms. Accordingly, the present article comprehensively reviews on the various green aspects of lab-on-a-chip devices for analytical processes which aim at fabricating environmentally friendly and cost-effective downsized devices so that the risk factor at the user's end upon longer exposure as well as to the environment can be reduced. The decisive factors for the accomplishment of green aspects of lab-on-a-chip devices including sample preparation using lab-on-a-chip systems to minimize the amount of sample/solvents to few microliters only, substitution of harmful solvents with green alternatives, minimal waste generation or proper treatment of waste and biodegradable and biocompatible platforms for fabricating lab-on-a-chip devices have been discussed in details. Additionally, the challenges that may hinder their commercialization are also critically discussed.

Defatted rice bran pretreated with deep eutectic solvents and sequential use as feedstock for subcritical water hydrolysis

Deffated rice bran has potential to processing into ethanol due to its lignocellulosic composition and agricultural productivity. The composition of the pretreated deffated rice bran with Deep Eutectic Solvent was investigated aiming the production of sugars and bioproducts using subcritical water hydrolysis. Changes in the deffated rice bran composition at different pretreatment times and mixtures of deep eutectic solvent were evaluated by the derivative of thermogravimetric analysis. The pretreated deffated rice bran presented an enrichment in the content of hemicelluloses (281.0%) and delignification (59.3 %). Under the same condition of subcritical water hydrolysis (230 °C/R-100) the yield of fermentable sugars increased 2.20 times in the same study time interval (20 min) when comparing pretreated and untreated deffated rice bran.

The ability of deep eutectic solvent systems to extract bioactive compounds from apple pomace

The objective of this study was to examine the bioactivity of extracts from apple pomace obtained by non-conventional green extraction methods (DES systems). Bioactivity was antioxidant capacity and ability to stimulate insulin secretion from pancreatic beta-cells. The antioxidant capacity of extracts was examined using the DPPH and the FRAP assay. Impact of the extracts on cell viability and insulin secretion were examined using the BRIN-BD11 cell line. ChCl:EG(1:4) extracts resulted in high antioxidant capacity in the DPPH assay (80.1% inhibition versus 11.3%). Extracts obtained from the classical systems demonstrated an ability to promote insulin secretion significantly higher than the positive control, p < 0.05. ChCl:EG(1:4) extracts stimulated insulin secretion to a lesser extent. Overall, the data provides evidence for the potential of DES systems to extract bioactive compounds from apple pomace that have relevance for metabolic health. Further optimisation of the extraction procedures should be tailored to the desired bioactive properties.

Recent developments in green approaches for sustainable synthesis of indole-derived scaffolds

An important issue to discover biological structures is the design of sustainable, safe, clean, cost-effective, excellent efficient synthetic reactions, and minimal energy consumption to provide structural diversity compounds with interesting biological properties. Among five-membered nitrogen-containing heterocyclic compounds, indole-containing scaffolds are heterocyclic structures found in abundance in natural products and various synthetic compounds, which have received remarkable attention in recent years due to their therapeutic and pharmaceutical properties and valuable role in the process of drug discovery. Indoles can be synthesized by various procedures although most of these procedures have their own restrictions and drawbacks such as performing the reaction in a toxic solvent, need of transition-metal catalysts, and amount of waste solvents. Due to the medicinal importance of indole and the need for green methods of drug synthesis, this review highlights the latest green synthetic methods leading to the formation of indole-containing compounds focusing on the past 4 years with typical examples. This review is divided into two sections: green solvents and green techniques that lead to the synthesis of indole-derived scaffolds.

Developing highly transparent yet ultraviolet blocking fully biocomposite films based on chitin and lignin using ethanol/water as processing solvents

Developing fully biobased products with functionality in a green fashion is highly desirable to meet the increasing demand for environmental sustainability and mitigate "white pollution" by petroleum-based counterparts. Here, chitin from shrimp shells was propionylated to obtain chitin propionate (CP) with significantly improved solubility in organic solvents, organosolv lignin (OSL) was extracted from the forest harvest residuals. The fully biobased composite consisting of CP as a matrix and OSL as a UV-blocker were successfully prepared using acidic ethanol/water as a green processing solvent. The results indicated that the 5% OSL addition enabled the CP film to block approximately 98% UV light while allowing 71% visible light transmittance; tensile and thermal properties were also retained. Nearly 100% UV light was blocked with 20% OSL addition, but visible light transmittance was moderately sacrificed. This study provides an alternative solution to produce novel fully biobased films with high transparency yet excellent UV protection for potential packaging applications.

Miniaturized green sample preparation approaches for pharmaceutical analysis

The development of green sample preparation procedures is an extremely important research field in which more and more applications are constantly being proposed in different areas, including pharmaceutical analysis. This review article is aimed at providing a general overview of the development of miniaturized green analytical sample preparation procedures in the pharmaceutical analysis field, with special focus on the works published between January 2017 and July 2021. Particular attention has been paid to the application of environmentally friendly solvents and sorbents as well as nanomaterials or high extraction capacity sorbents in which the solvent volumes and reagents amounts are drastically reduced, with their subsequent advantages from the sustainability point of view.

A review of green solvent extraction techniques and their use in antibiotic residue analysis

Antibiotic residues are being continuously recognized in the aquatic environment and in food. Though the concentration of antibiotic residues is typically low, adverse effects on the environment and human health have been observed. Hence, an efficient method to determine numerous antibiotic residues should be simple, inexpensive, selective, with high throughput and with low detection limits. Liquid-based extractions have been exceedingly used for clean-up and preconcentration of antibiotics prior to chromatographic analysis. In order to make methods more green and environmentally sustainable, conventional hazardous organic solvents can be replaced with green solvents. This review presents sampling strategies as well as comprehensive and up-to-date methods for chemical analysis of antibiotic residues in different sample matrices. Particularly, solvent-based sample preparation techniques using green solvents are discussed along with applications in antibiotic residue analysis.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Environmentally friendly achiote seed extracts with higher δ-tocotrienol content have higher in vitro and in vivo antioxidant activity than the conventional extract

Achiote (Bixa orellana) is highly appreciated as a condiment and as the main source of bixin and tocotrienols, both having antioxidant properties. To explore the possibility of maximizing the antioxidant activity of achiote seed extracts using clean methodologies, the use of sonication and green solvents were tested. Ethyl lactate, isopropyl acetate, and ethanol combined with probe sonication produced the best results, obtaining similar bixin contents but higher δ-tocotrienol contents, as well as significantly higher in vitro and in vivo antioxidant activity compared with the maceration method extract, requiring low energy and saving time and solvents. The probe-sonicated achiote extract with the highest δ-tocotrienol content was better at increasing the Caenorhabditis elegans resistance to oxidative stress than the extract obtained through maceration. This is the first report about the effect of sonication combined with green solvents on the bixin and δ-tocotrienol content in achiote seed extracts and its relevance on the in vitro and in vivo antioxidant activity.

Comparative analysis of various extraction processes based on economy, eco-friendly, purity and recovery of polyhydroxyalkanoate: A review

Bioplastics have been an interesting area of research and development in the last few decades. Normal plastics are made out of petroleum products, which is a non-renewable resource. Apart from that, its non-biodegradable nature makes it a serious threat to the environment, and hence a better alternative is needed. Bioplastics are synthesized by microorganisms and are biodegradable; this property makes them a promising alternative to normal plastic. However, the major drawback related to bioplastic is the high cost of its production. Polyhydroxyalkanoate (PHA) is a very popular biopolymer produced by different types of microbes. The review focuses on the different methods of extraction of PHA based on the percentage of purity, recovery, eco-friendly, and cost-effectiveness. There is a wide array of extraction methods reported to date, wherein there is the involvement of different types of solvents (like halogenated, non-halogenated, and green solvents) or mechanical or enzymatic methods. Each extraction process has its advantages and disadvantages. In this study, we have attempted to present a structured comparison of these different methods and highlight the factors that can be addressed for better extraction of PHA thereby making it a feasible alternative to commercial synthetic plastic.

Green Solvents Combined with Bioactive Compounds as Delivery Systems: Present Status and Future Trends

Green solvents such as ionic liquids (ILs) unlock possibilities for developing innovative biomedical and pharmaceutical solutions. ILs are the most investigated solvents for compound extractions, as reaction media and/or catalysts, and a desired eco-friendly solvent to process biomacromolecules for biomaterial production. Investigations demonstrate that the tunable nature and physicochemical features of ILs are also beneficial for building up delivery systems through their combination with bioactive compounds. Bioactive compounds from synthetic origins, like ibuprofen, ketoprofen, and natural sources such as curcumin, flavonoids, and polyphenols are essential starting points as preventive and therapeutic agents for treating diseases. Therefore, the association of those compounds with ILs opens up windows of opportunities in this research field. This Review assesses some of the main and important recent information and the current challenges concerning delivery platforms based on ILs combined with bioactive compounds of both natural and synthetic origins. Moreover, the chemistry, bioavailability, and biological functions of the main bioactive compounds used in the ILs-based delivery platforms are described. These data are presented and are discussed, together with the main delivery routes of the systems.

Modulating solvation interactions of deep eutectic solvents formed by ammonium salts and carboxylic acids through varying the molar ratio of hydrogen bond donor and acceptor

Deep eutectic solvents (DESs) have gained increasing popularity in separation science due to the fact that their physico-chemical properties can be easily fine-tuned by varying the type or ratio of hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). While it is well-known that the molar ratio of HBA/HBD affects the melting point of a eutectic mixture, much less is understood regarding its effect on the magnitude of individual solvation interactions. This is largely due to the fact that established solvatochromic dye methods lack sensitivity when the HBA/HBD ratio is varied slightly in a eutectic mixture. Herein, this study is the first to measure the variation of DES solvation interactions with small changes in the molar ratio of HBA/HBD using inverse gas chromatography (IGC). Solute-solvent interactions of three different DES systems comprised of ammonium salts and organic acids were examined. The probe molecules were studied for 18 eutectic mixtures of varied HBA and HBD composition. DES hydrogen bond basicity, hydrogen bond acidity, and dispersive-type interactions exhibited the greatest change when the molar ratio of HBA/HBD was varied in the eutectic mixture. Results from this study demonstrate that the HBA/HBD ratio can be used to modulate the solvation characteristics for this class of DESs in separations and that the stoichiometric ratio of the HBA/HBD is important in ensuring their reproducible preparation.

Ionic hydrophobic deep eutectic solvents in developing air-assisted liquid-phase microextraction based on experimental design: Application to flame atomic absorption spectrometry determination of cobalt in liquid and solid samples

This paper reports a new and simple microextraction procedure for cobalt determination using green ionic hydrophobic deep eutectic solvent in developing air-assisted liquid-phase microextraction and flame atomic absorption spectrometry. Thecomplexationof Co(II) ions was carried out by using dithizone solution as complexing agent at pH5.The key variables affecting microextraction steps were optimized by response surface methodology (RSM) based on central composite design. Under the optimum microextraction conditions, calibration graph was linear in the range of 0.1-500 µg L^-1 Co(II) with correlation coefficient of 0.9985. Additionally, detection limit, quantitation limit and enrichment factor were found to be 0.04 µg L^-1, 0.1 µg L^-1 and 175, respectively. The reproducibility and repeatability were ≤ 2.9% and ≤ 3.6%, respectively. Based on the results obtained, the proposed methodology has been successfully employed for Co analysis in liquid and solid samples with recovery range of 94.2-105%.

Towards safer non-volatile tissue fixatives: Evaluation of choline-based ionic liquids for fixing ocular tissues

Volatile organic chemicals (VOCs) are routinely used for processing biological tissue samples in clinical laboratories. Recognizing their serious health and environmental impacts, a few non-volatile green solvents (choline based ionic liquids, ILs) were evaluated as tissue fixatives here. Microscopic evaluation of histo-morphology, fixation and staining quality, and macromolecular integrity (DNA and proteins) were assessed in human eye tissues (sclera, choroid, retinal layers and retinal pigmented epithelium, eyelid and orbit) after IL-fixation. Formalin-fixed tissues were used as standard reference. Microscopic examination revealed favorable histomorphology, tissue fixation and staining characteristics in most tissues immersed in ILs. Time taken to fix, and stability over a period of time (24 h, 48 h, 1 week, 1 month) was also recorded. Electrophoretic analysis revealed stability of cellular proteins and nucleic acids in IL-fixed scleral tissues. Heterogeneity in tissue fixation property relative to the type of ocular tissue, duration of fixation and storage, warrant further design and optimization of ILs to fix biological tissues. The simple cholinium salts based ILs tested here show favorable potential for tissue fixation application, and as an alternative approach to the use of VOCs, towards sustainable biomedical practice.

Green extraction of proteins, umami and other free amino acids from brown macroalgae Ascophyllum nodosum and Fucus vesiculosus

Seaweeds are a valuable potential source of protein, as well as free amino acids (FAAs) with umami flavour which are in high demand by the food industry. The most commonly used flavouring agents in the food industry are chemically synthesised and therefore are subject to concerns regarding their safety and associated consumer resistance. This study focuses on the effects of extraction time (1 and 2 h) and solvents (0.1 M HCl, 1% citric acid and deionised water) on the extraction of protein and FAAs including umami FAAs from Irish brown seaweeds (Ascophyllum nodosum and Fucus vesiculosus). Extraction yields were influenced by both the extraction solvent and time, and also varied according to the seaweed used. Both seaweeds investigated were found to be good sources of protein, FAAs including umami FAAs, demonstrating potential application as flavouring agents in the food industry. Overall, the use of green solvents (deionised water and citric acid) resulted in higher recoveries of compounds compared to HCl. The results of this study will facilitate the use of more sustainable solvents in industry for the extraction of proteins and flavouring agents from seaweed.

Solvent-based washing as a treatment alternative for onshore petroleum drill cuttings in Thailand

In Thailand, onshore drill cuttings (DC) contaminated with total petroleum hydrocarbon (TPH) are currently transported off-site for incineration, causing high transportation cost and potential leakage to the environment. To address the issues, we develop solvent-based washing as a greener alternative for onshore DC remediation, focusing on solvent selection, washing process optimization, and solvent recovery. The results showed that ethyl lactate (EL) was the best green solvent for DC washing, compared to water, ethylene glycol, and ethyl acetate. Based on response surface methodology assisted with central composite design, the maximum TPH removal of 87.1% was achieved from 4 mL g^-1 liquid-to-solid ratio, 14 min washing time, and 80 rpm stirring speed, and the TPH removal rate by EL fitted well with the second-order reaction (R² = 0.9774). Furthermore, the spent EL was successfully recycled by simple and low-energy adsorption using granular activated carbon (GAC). With the sufficient GAC dosage, TPH could be completely removed from the spent EL without impairing the original EL properties. Moreover, the recycled EL exhibited its successful reuse in the subsequent DC washing process. These findings suggest that solvent washing accompanied with solvent recovery by adsorption could be a novel and greener remedial scheme for onshore DC management.

Electrochemical (bio) sensors go green

Electrochemical (bio) sensors are now widely acknowledged as a sensitive detection tool for disease diagnosis as well as the detection of numerous species of pharmaceutical, clinical, industrial, food, and environmental origin. The term 'green' demonstrates the development of electrochemical (bio) sensing platforms utilizing biodegradable and sustainable materials. Development of green sensing platforms is one of the most active areas of research minimizing the use of toxic/hazardous reagents and solvent systems, thereby further reducing the production of chemical wastes in sensor fabrication. The present review includes green electrochemical (bio) sensors which are based on firstly, green sensors comprising natural and non-hazardous materials (e.g., paper/clay/zeolites/biowastes), secondly sensors based on nanomaterials synthesized by green methods and lastly sensors constituting green solvents (e.g., ionic liquids/deep eutectic solvents). Electrochemical performances of such green sensors and their benefits such as biodegradability, non-toxicity, sustainability, low-cost, sensitive surfaces, etc. Have been discussed for quantification of various target analytes. Associated challenges, possible solutions, and opportunities towards fabricating green electrochemical sensors and biosensors have been provided in the conclusion section.

Green Solvent: Green Shadow on Chemical Synthesis

The natural beauty and purity of our planet has been contaminated deeply due to human selfish activities such as pollution, improper waste management, and various industrial and commercial discharges of untreated toxic by-products into the lap of nature. The collective impact of these hazardous suspensions into the natural habitat is very deadly. Challenges due to human activity on the environment have become ubiquitous. The chemical industry has a major role in human evolution and, predictably, opened gates of increased risk of pollution if the production is not done sustainably. In these circumstances, the notion of Green Chemistry has been identified as the efficient medium of synthesis of chemicals and procedures to eradicate the toxic production of harmful substances. Principles of Green Chemistry guide the scientist in their hunt towards chemical synthesis which requires the use of solvents. These solvents contaminate our air, water, land and surrounding due to its toxic properties. Even though sufficient precautions are taken for proper disposal of these solvents but it is difficult to be recycled. In order to preserve our future and coming generation from the adverse impacts associated with solvents it is very important to find alternative of this which will be easy to use, reusable and also eco-friendly. Solvents are used daily in various industrial processes as reaction medium, as diluters, and in separation procedures. As reaction medium, the role of solvent is to bring catalysts and reactants together and to release heat thus affecting activity and selectivity. The proper selection of the solvent considering its biological, physical and chemical properties is very necessary for product separation, environmental, safety handling and economic factors. Green solvents are the boon in this context. They are not only environmentally benign but also cost effective. The biggest challenge faced by the chemists is adaptation of methods and selection of solvents during chemical synthesis which will give negligible waste product and will remain human and nature friendly. During designing compounds for a particular reaction it is difficult to give assurance regarding the toxicity and biodegradability of the method. Chemists are still far away from predicting the various chemical and biological effects of the compounds on the back of the envelope. To achieve that point is formidable task but it will definitely act as inspiration for the coming generation of chemists. The green solvents are undoubtedly a far better approach to eliminate the negative impacts and aftermath of any chemical synthesis on the environment. Our study in this review covers an overview of green solvents, their role in safer chemical synthesis with reference to some of the important green solvents and their detail summarization.

The potential of the pecan nut cake as an ingredient for the food industry

Pecan nut [Carya illinoinensis (Wangenh.) K. Koch] cake (PNC) is a co-product from the oil extraction industry and its potential as an ingredient for the food industry are not well known. In this work, the nutritional composition and the functional properties of PNC were studied. Additionally, the influence of different solvents (ethanol, water, and acetic acid) on the phytochemical composition and antioxidant capacity (reducing potential of the hydrophilic compounds - RPHC, 2,2-diphenyl-1-picrylhydrazyl - DPPH, and total reducing capacity - TRC) of PNC extracts were established using a simplex-centroid design. PNC is a source of carbohydrates, protein, and dietary fiber (40.5; 21.87 and 13.01 g 100 g^-1, respectively). The PNC exhibited a low energy value when compared to the raw nut (398.8 kcal 100 g^-1 and 645.54 kcal 100 g^-1, respectively). Mg, Mn and Co (416.74; 23.21 mg 100 g^-1 and 59.00 μg 100 g^-1, respectively) were the main minerals identified in PNC. The PNC also presented functional properties such as emulsifying and oil absorption capacities and a great ability to absorb water. Using the proposed solvent mixture system, the content of total phenolic compounds and condensed tannins recovered from PNC ranged between 172.43 and 2744.24 mg GAE 100 g^-1, and 253.42 to 1376.44 mg CE 100 g^-1, respectively. The antioxidant capacity of the PNC extract was showed through its ability to reduce hydrophilic (172.06-1714.96 mg GAE 100 g^-1) to transfer hydrogen atoms (12.55-74.11% scavenging activity) and lipophilic compounds (509.87-2070.80 mg QE 100 g^-1) using RPHC, DPPH, and TRC methods, respectively. Combining ethanol, water, and acetic acid at 30 °C for 15 min, positively affects the extraction of bioactive compounds from PNC, as well as the antioxidant activity of the extracts. The physicochemical, functional, phytochemical, and antioxidant properties demonstrate that pecan nut cake may represent a potential ingredient or additive for the food, pharmaceutical, and cosmetic industries.

Cyclodextrin-based sorbents for solid phase extraction

Cyclodestrins (CDs) are cyclic oligosaccharides well-known for their ability to form host-guest inclusion complexes with properly sized compounds. They have been used for decades as chiral selectors as well as drug delivery systems within the frameworks of separation science and pharmaceutical science. More recently, their use has been extended to the field of extractive science under the stimulus of additional advantageous characteristics, such as low-price, negligible environmental impact, non-toxicity, as arising from the fact that natural CDs are starch degradation products. To abate their solubility in water and generate novel sorbents for solid phase extraction, the following approaches have been employed: (i) immobilization onto inert materials (silica, attapulgite, etc.); (ii) immobilization onto nanomaterials (magnetic nanoparticles, titanium oxide, carbon nanotubes, graphene oxide, etc.); (iii) polymerisation with specific cross-linkers to form the so-called CD-based nanosponges. Particularly promising are these last ones for their selectivity, mesoporous structure, insolubility in aqueous media and good dispersibility. This review offers a concise overview on the state of art and future prospects of CDs in this important sector of the analytical chemistry, offering a critical perspective of the most significant applications.

Natural deep eutectic solvents and aqueous solutions as an alternative extraction media for propolis

Ethanolic extracts of propolis are consumed for their health benefits even though direct consumption of alcoholic extracts is not always ideal. Natural Deep Eutectic Solvents (NADES) can potentially extract similar compounds as alcoholic extracts while being better for direct consumption. Therefore, in this work alternative solvents for the extraction of green propolis including its biomarker artepillin C were examined. Sixteen NADES made from low toxicity chemicals, including the essential amino acid l-lysine, were explored along with twelve individual NADES components and honey, which showed similar physical-chemical properties to NADES. At 50 °C NADES made from choline chloride-propylene glycol or lactic acid proved to be equal or better than the benchmark EtOH:Water 7:3 (v/v). Alternatively, aqueous l-lysine appeared as a potential solvent for the preparation of aqueous propolis extracts. From these findings NADES, honey and aqueous l-lysine solutions all demonstrated the potential to replace ethanol or water for extracting green propolis.

DMSO EVOL™ as novel non-toxic solvent for polyethersulfone membrane preparation

The possibility of replacing traditional toxic solvents normally employed during the preparation of polymeric membranes with greener alternatives represents a great challenge for safeguarding the human health and protecting the environment. In this work, an improved and pleasant-smelling version of dimethylsulfoxide (DMSO), i.e., DMSO EVOL™, was used as "greener solvent" for the preparation of polyethersulfone (PES) microfiltration (MF) membranes using a combination of non-solvent and vapor-induced (NIPS and VIPS, respectively) phase separation technique for the first time. The effect of two different additives polyvinylpyrrolidone (PVP) and poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (Pluronic®) together with polyethylene glycol (PEG) on membrane properties and performances has been also evaluated. The membranes were characterized in terms of morphology, mechanical resistance, pore size, and water permeability. The obtained results show that DMSO EVOL™ is able to replace 1-methyl-2-pyrrolidone (NMP), which is a more toxic solvent normally used for the preparation of PES membranes. Furthermore, it was possible to tune the produced membranes in the range of MF (0.1-0.6 μm).

Multifunctional vesicular coacervates as engineered supramolecular solvents for wastewater treatment

In this study, multifunctional supramolecular solvents (SUPRASs) able to simultaneously extract ionic, polar and hydrophobic organic compounds from wastewater have been developed. SUPRASs were synthesized in aqueous solutions containing mixtures of carboxylic acids and carboxylates that underwent spontaneous self-assembly and coacervation under the addition of tetraalkylammonium ions. These SUPRAS consisted of coacervate droplets made up of large unilamellar vesicular aggregates bridged by tetraalkylammonium ions. Both, the high kinetic stability of vesicles and their strong interaction with tetraalkylammonium ions through different bonds working cooperatively, made supramolecular nanostructures in the SUPRAS chemically stable, which minimized the presence of solvent residues in the treated water. The suitability of the synthesized SUPRASs to behave as multifunctional extractants in water treatment was investigated by their application to the removal of anionic, cationic and ionizable dyes and PAHs. All the variables affecting the extraction process were optimized (i.e. chain length of the tetraalkylammonium ion, fractional SUPRAS phase volume, pH, ionic strength, pollutant concentration and stirring time/rate). All the pollutants selected were efficiently removed at room temperature and a fractional SUPRAS phase volume of 0.01. Applicability of the SUPRAS-based treatment to the efficient removal of dyes in textile effluents and benzo(a)pyrene in tap water was proved. Overall, the low cost, easy synthesis and high removal efficiency of these engineered SUPRASs make them highly promising for application in comprehensive wastewater treatments.

The Use of Molecular Oxygen for Liquid Phase Aerobic Oxidations in Continuous Flow

Molecular oxygen (O₂) is the ultimate “green” oxidant for organic synthesis. There has been recent intensive research within the synthetic community to develop new selective liquid phase aerobic oxidation methodologies as a response to the necessity to reduce the environmental impact of chemical synthesis and manufacture. Green and sustainable chemical processes rely not only on effective chemistry but also on the implementation of reactor technologies that enhance reaction performance and overall safety. Continuous flow reactors have facilitated safer and more efficient utilization of O₂, whilst enabling protocols to be scalable. In this article, we discuss recent advancements in the utilization of continuous processing for aerobic oxidations. The translation of aerobic oxidation from batch protocols to continuous flow processes, including process intensification (high T/p), is examined. The use of “synthetic air”, typically consisting of less than 10% O₂ in N₂, is compared to pure O₂ (100% O₂) as an oxidant source in terms of process efficiency and safety. Examples of homogeneous catalysis and heterogeneous (packed bed) catalysis are provided. The application of flow photoreactors for the in situ formation of singlet oxygen (¹O₂) for use in organic reactions, as well as the implementation of membrane technologies, green solvents and recent reactor solutions for handling O₂ are covered.

Evaluation of the influence of green extraction solvents on the cytotoxic activities of Crinum (Amaryllidaeae) alkaloid extracts using in-vitro-in-silico approach

ETHNOPHARMACOLOGICAL RELEVANCE

The traditional use of Amaryllidaceae plants to treat many disease have been known for a very long period of time. The chemical analysis of these plants has yielded a diversity of alkaloids with analgesic, anticholinergic, antitumor and antiviral activities. Crinum bulbispermum (Burm.f.) Milne-Redh. & Schweick in particular has been used by Zulu, Sotho and Tswana people to treat tumors as a form of chemotherapy, while in Madagascar, Crinum powellii Baker Handb. was used in the treatment of abscesses and tumors. Many of the alkaloids spawned by genus Crinum will surely take part in the production of anticancer drugs but their further clinical development is restricted by their limited commercial availability. An emerging area of research is the establishment of green extraction techniques of different targeted compounds.

AIM OF THE STUDY

Our comparative study has investigated the possibility of getting improved biological responses by changing extraction solvent to a better and greener one. This study aimed to assess the cytotoxic activity of Crinum powellii and Crinum bulbispermum bulbs, when extracted by different green solvents.

MATERIALS AND METHODS

The green solvents Genapol X-80 (a surfactant-aided extraction), DES-3 (Choline chloride: fructose 5:2) mixture (a natural deep eutectic solvent) and purified distilled water were used for extraction of the bulbs. Extracts were tested against two cell lines HEPG-2 and HCT 116, with doxorubicin as a positive reference. Molecular docking studies were carried out to illustrate binding orientations of the alkaloids in the active site of several molecular targets for treatment of hepatic and colorectal cancer.

RESULTS

DES aided extraction showed highest cytotoxicity against the two cell lines, followed by surfactant aided extracts and finally aqueous extracts. There is an obvious relationship between alkaloidal content and antiproliferative potency of extracts. Multivariate statistical analyses were performed to aid the prediction of the alkaloids responsible for the activity. The alkaloid crinine showed high correlation coefficient value against HCT colon cancer cell line in the orthogonal projection to latent structures (OPLS) model, suggesting that it could operate with a selective mode of action on this cell line. In addition, the alkaloid lycorine had almost no correlation to anti-proliferative activity against HCT colon cancer cells. Molecular docking studies confirmed the same conclusions.

CONCLUSION

Herein, it was demonstrated that natural deep eutectic solvents (NADES) components and surfactant solutions could be chosen to enhance biological activity of extracts prepared.

Green biotransformations catalysed by enzyme-inorganic hybrid nanoflowers in environmentally friendly ionic solvents

Environmentally friendly ionic solvents such as (a) ionic liquids (ILs) formulated with hydroxyl ammonium cations and various carboxylic acid anions and (b) choline chloride or ethyl ammonium chloride-based deep eutectic solvents (DES) were tested as media for hydrolytic and synthetic reactions catalysed by lipase-inorganic hybrid nanoflowers. The nature of ionic solvents used has a significant effect on the hydrolytic and synthetic activity of the immobilized lipase, as well as on its stability and reusability. In choline chloride-based DES, the activity and especially the operational stability of the biocatalyst are significantly increased compared to those observed in buffer, indicating the potential application of these solvents as green media for various biocatalytic processes of industrial interest.

Green techniques in comparison to conventional ones in the extraction of Amaryllidaceae alkaloids: Best solvents selection and parameters optimization

An undisputed trend in sample preparation at present is to meet the requirements of green chemistry especially in the field of natural products. Green technology continuously pursues new solvents to replace common organic solvents that possess inherent toxicity. Over the past two decades, non-ionic surfactants have gained enormous attention from the scientific community. The micelle-mediated extraction and cloud-point preconcentration (CPE) methods offer a convenient alternative to the conventional extraction systems. Recently, natural deep eutectic solvents (NDESs) have emerged as green and sustainable solvents for efficient extraction of bioactive compounds or drugs. They are generally composed of neutral, acidic or basic compounds that form liquids of high viscosity when mixed in certain molar ratio. The presented work aimed to comprehensively compare and evaluate the potential and effectiveness of NDES as well as non-ionic surfactants (Genapol X-080, Triton X-100 and Triton X-114) for extraction of Amaryllidaceae alkaloids from Crinum powellii bulbs as representative example of plant material, in comparison to the conventional solvents (methanol, ethanol and water).A new validated high-performance thin-layer chromatographic (HPTLC) method has been developed for the simultaneous quantitation of three alkaloids markers, lycorine, crinine and crinamine, in the bulbs of C. powellii. Extraction efficiency of the targeted alkaloids from the bulb matrix with organic and ecofriendly (green) solvents were studied. Results revealed that NDES and surfactants were significantly more efficient in alkaloid extraction than previous methods requiring the consumption of organic solvents and water. Genapol X-80 demonstrated 138%, 149% and 145%, while choline chloride: fructose (5:2): H₂O (35%) NDES mixture demonstrated 243%, 225% and 238% of the total alkaloidal extraction capacity of ethanol, methanol and water, respectively at 50 °C for extraction time 1 h using ultrasonication for all experiments. Furthermore, Box-Behnken response surface design combined with the overall desirability value were successfully employed to optimize and study the individual and interactive effect of process variables such as extraction temperature, time and surfactant %, for Genapol X-80, and sonication extraction temperature, time and water concentration, for choline chloride: fructose: H₂O NDES mixture, on the alkaloidal yield from C. powellii. It was evident that parameters interacting together can act in synergism if adjusted properly according to the optimized conditions to obtain maximum alkaloids extractability. It is for the first time that the efficiency of micelle-mediated extraction has been compared to that of natural deep eutectic solvents for the extraction of alkaloids and the results thoroughly discussed.