Packaging Concepts for Ready-to-Eat Food: Recent Progress

Ready-to-Cook Foods: Technological Developments and Future Trends-A Systematic Review

Ready-to-cook (RTC) foods can significantly improve the cooking experience of busy or unskillful consumers, based on production involving technical combinations of food processing and packaging. Initialized by a market survey of 172 products in Beijing, this systematic review analyzes RTC foods' development status according to ingredients, packaging, and storage conditions to further clarify the scope of RTC foods. The working principles and efficacy of various food processing techniques, such as washing, cutting, marinating, and frying, and packaging design or innovations such as modified atmosphere packaging (MAP) were both summarized in detail, with attention to their ability to extend shelf life, reduce safety risks, and maximize production efficiency in RTC food production. The cutting-edge technologies that may potentially apply in the RTC food processing or packaging sector were compared with current approaches to visualize the direction of future developments. In conclusion, we have observed the specific pattern of RTC food varieties and packaging formats in the Beijing market and revealed the advancements in RTC food technologies that will continue playing a critical role in shaping this growing market, while challenges in scalability, cost-efficiency, and sustainability remain key areas for future research. The data and perspectives presented will articulate the conceptions and existing challenges of RTC food, foster consumer perception and recognition of similar products, and deliver useful guidance for stakeholders interested in such products.

Production of Lipopeptides from Bacillus velezensis BVQ121 and Their Application in Chitosan Antibacterial Coating

The extracellular substance of Bacillus has antibacterial effects inhibiting multiple foodborne pathogens and plays important roles in food production. This study found one Bacillus velezensis BVQ121 strain producing antibacterial lipopeptides (BVAL). After optimization of the fermentation conditions, the BVAL yield was the highest at 1.316 ± 0.03 g/L in reality with the initial pH 6.0, temperature 31 °C, and shaker speed 238 rpm when the optimal nitrogen and carbon sources were used in Landy medium for fermentation. The antibacterial components were identified as iturin, surfactin, and fengycin by HPLC and MALDI-TOF-MS. The MIC was at 2 mg/mL and MBC was at 5 mg/mL. The 6% weight ratio of nanocellulose dosage in chitosan solution could improve the tensile length and strength of the film, and the antibacterial performance was enhanced by the addition of BVAL. The addition of BVAL had no effect on the color and ductility of the film and improved its antibacterial effect. The shelf life of pigeon eggs can be extended by more than 10 days to resist bacterial infections after coating with the chitosan-nanocellulose-BVAL film solution.

The Influence of Storage Temperature and Packaging Technology on the Durability of Ready-to-Eat Preservative-Free Meat Bars with Dried Plasma

Food business operators must include the results of shelf life testing in their HACCP plan. Ready-to-eat preservative-free meat products enriched with blood plasma are an unfathomable area of research in food safety. We tested modified atmosphere (80% N2 and 20% CO2) and vacuum packaged RTE preservative-free baked and smoked pork bars with dried blood plasma for Aerobic Plate Count, yeast and mould, lactic acid bacteria, Staphylococcus aureus, Enterobacteriaceae, Escherichia coli, and Campylobacter spp., and the presence of Listeria monocytogenes and Salmonella spp. during storage (temperatures from 4 to 34 °C) up to 35 days after production. The obtained data on the count of individual groups of microorganisms were subjected to analysis of variance (ANOVA) and statistically tested (Student's t-test with the Bonferroni correction); for temperatures at which there were statistically significant differences and high numerical variability, the trend of changes in bacterial counts were visualised using mathematical modelling. The results show that the optimal storage conditions are refrigerated temperatures (up to 8 °C) for two weeks. At higher temperatures, food spoilage occurred due to the growth of aerobic bacteria, lactic acid bacteria, yeast, and mould. The MAP packaging method was more conducive to spoilage of the bars, especially in temperatures over 8 °C.

A Review on Antimicrobial Packaging for Extending the Shelf Life of Food

Food packaging systems are continually impacted by the growing demand for minimally processed foods, changing eating habits, and food safety risks. Minimally processed foods are prone to the growth of harmful microbes, compromising quality and safety. As a result, the need for improved food shelf life and protection against foodborne diseases alongside consumer preference for minimally processed foods with no or lesser synthetic additives foster the development of innovative technologies such as antimicrobial packaging. It is a form of active packaging that can release antimicrobial substances to suppress the activities of specific microorganisms, thereby improving food quality and safety during long-term storage. However, antimicrobial packaging continues to be a very challenging technology. This study highlights antimicrobial packaging concepts, providing different antimicrobial substances used in food packaging. We review various types of antimicrobial systems. Emphasis is given to the effectiveness of antimicrobial packaging in various food applications, including fresh and minimally processed fruit and vegetables and meat and dairy products. For the development of antimicrobial packaging, several approaches have been used, including the use of antimicrobial sachets inside packaging, packaging films, and coatings incorporating active antimicrobial agents. Due to their antimicrobial activity and capacity to extend food shelf life, regulate or inhibit the growth of microorganisms and ultimately reduce the potential risk of health hazards, natural antimicrobial agents are gaining significant importance and attention in developing antimicrobial packaging systems. Selecting the best antimicrobial packaging system for a particular product depends on its nature, desired shelf life, storage requirements, and legal considerations. The current review is expected to contribute to research on the potential of antimicrobial packaging to extend the shelf life of food and also serves as a good reference for food innovation information.

Packaging materials and technologies for microwave applications: a review1

Packaging materials for microwave application should be generally designed based on products properties and processing conditions such as microwavability, susceptibility, processing condition, barrier properties, mechanical properties, storage condition, sustainability, convenience, and so on. Ready-to-eat products are packed in materials that can sustain thermal processing in an industrial oven and warming process in a household oven. In this context, high barrier polymers are versatile microwave packaging materials due to the microwave transparency (unlike metalized film) and high barrier. Additionally, microwave packaging materials used for ready-to-cook are intended to facilitate the microwave heating of the products in a domestic oven. The introduction of a functional feather to microwave packaging tends to improve the microwaving efficiency such as susceptor and shielding in the household oven or self-venting microwave packaging to safely release the internal steam. Furthermore, microwave-assisted thermal processing intends to control microbial contamination, requiring materials with adequate stability during processing and storage. The features of these materials are addressed in this review along with details on the basic requirements and advanced technologies for microwave packaging, microwave processing of prepackaged food, and migration testing. The prospects of microwave packaging materials in the near future are also discussed.

Characterization and Food Application of the Novel Lytic Phage BECP10: Specifically Recognizes the O-polysaccharide of Escherichia coli O157:H7

Escherichia coli O157:H7 is a global concern that causes serious diseases, such as hemolytic uremic syndrome and bloody diarrhea. To control E. coli O157:H7 in food, a novel siphophage, BECP10, that targets the O157 serotype was isolated and characterized. Unlike other E. coli phages, BECP10 can only infect E. coli O157 strains, and thus, did not infect other strains. The 48 kbp genome of BECP10 contained 76 open reading frames (ORFs), including 33 putative functional ORFs. The phage did not contain lysogeny-related modules or toxin-associated genes, suggesting that the phage might be strictly lytic. The tail spike protein (TSP) sequence had very low homology with the reported T1-like phages, indicating that TSP might be related to this unique host spectrum. The specific O-antigen residue of E. coli O157:H7 may be a key factor for phage infection by adsorption and receptor identification. The phage exhibited strong antibacterial activity against E. coli O157:H7 over a broad pH range and showed little development of phage-insensitive mutants. The phage sustained viability on the burger patties and reduced E. coli O157:H7 to a non-detectable level without the emergence of resistant cells at low temperatures for five days. Therefore, phage BECP10 might be a good biocontrol agent for E. coli O157:H7-contaminated food matrices.

Shelf-life, quality, safety evaluations of blueberry fruits coated with chitosan nano-material films

Chitosan coating (B/CH) in addition with nano-material films as silicon (B/CH/Nano-SiO₂) and titanium (B/CH/Nano-TiO₂) dioxides were developed and applied to detect potential changes on fresh blueberry fruits in commercial storage temperature. Physical, mechanical parameters (weight loss, decay rate, colour index and firmness), phytochemical contents (ascorbic acid, acidity, soluble solids concentration, titratable acidity, and repining index), phenolic enzymes (peroxidase and polyphenoloxidase), pigments (anthocyanin) and microbiological analysis (mesophilic aerobic, yeasts and molds populations) were detected every other day until the end of the experiment. Nano-coating based on (Nano-TiO₂) established the most suitable values for weight loss (2.22%), titratable acidity (0.45% citric acid), and repining index. (B/CH/Nano-TiO₂) reported a gradual increase in polyphenoloxidase and peroxidase enzyme activities (659.45 U/min g) and (20.39 U/min g), respectively. While, (B/CH/Nano-SiO₂) established the slightest change in acidity (2.61), anthocyanin (105.19 cyanidin-3-O-glucoside mg/100 g FW) and minimized the growth of mesophilic aerobic, yeasts, and molds populations (3.73–3.98 log CFU/g), respectively. (B/CH) films maintained lightness (6.80% loss) and recorded the highest ascorbic acid content (7.34 g/100 g FW). Therefore, chitosan nano-material films can maintain nutrients and control the microbial growth for extending the shelf life of fresh blueberry fruits.

Effect of Frying Conditions on Self-Heating Fried Spanish Mackerel Quality Attributes and Flavor Characteristics

In this study, we investigated the effects of different frying conditions on the quality characteristics of fried Spanish mackerel (Scaberulous niphonius) to address the food quality degradation of self-heating fish products after frying, sterilization, and reheating. Furthermore, the effect of different moisture contents (65%, 60%, 55%, and 50%) of fried Spanish mackerel on texture, color, and microstructure after sterilization and self-heating were examined. The flavor fingerprints of different frying temperatures (140 °C, 160 °C, 180 °C, and 200 °C) coupled with the optimal moisture content were identified; furthermore, volatile organic compounds (VOCs) were studied using headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) with principal component analysis (PCA). The results indicated that the shear force value significantly increased, while the hardness and chewiness significantly decreased simultaneously with decreasing moisture content. Samples containing 65% moisture content showed the highest L*, a*, and W values, while their b* value was the lowest, and the most clearly visible fibrous veins with tiny cracks could be observed in them. Samples fried at 160 °C and 65% moisture content exhibited the richest VOCs, with a greasy or fried aroma. Based on the PCA, there were significant differences in the sample VOCs under different frying conditions. In summary, among all treatments, frying at 160 °C with 65% moisture content resulted in the highest food quality of fish filets. The results of this study could provide a theoretical basis for improving the food quality of self-heated fish products.

The Use of Edible Films Based on Sodium Alginate in Meat Product Packaging: An Eco-Friendly Alternative to Conventional Plastic Materials

The amount of plastics used globally today exceeds a million tonnes annually, with an alarming annual growth. The final result is that plastic packaging is thrown into the environment, and the problem of waste is increasing every year. A real alternative is the use bio-based polymer packaging materials. Research carried out in the laboratory context and products tested at the industrial level have confirmed the success of replacing plastic-based packaging with new, edible or completely biodegradable foils. Of the polysaccharides used to obtain edible materials, sodium alginate has the ability to form films with certain specific properties: resistance, gloss, flexibility, water solubility, low permeability to O2 and vapors, and tasteless or odorless. Initially used as coatings for perishable or cut fresh fruits and vegetables, these sodium alginate materials can be applied to a wide range of foods, especially in the meat industry. Used to cover meat products, sodium alginate films prevent mass loss and degradation of color and texture. The addition of essential oils prevents microbial contamination with Escherichia coli, Salmonella enterica, Listeria monocytogenes, or Botrytis cinerea. The obtained results promote the substitution of plastic packaging with natural materials based on biopolymers and, implicitly, of sodium alginate, with or without other natural additions. These natural materials have become the packaging of the future.

Rational Design of Packaging: Toward Safer and Ecodesigned Food Packaging Systems

It is necessary and urgent to reduce the impact of single-use plastics and in particular those used for beverages and similar products. Fewer plastics or reduced shelf-life need to be explored simultaneously while keeping open the possibilities of bringing on the innovative market designs and consumer experiences. This work details a general computational framework bridging simulation of coupled mass transfer and non-linear thermodynamics with 3D geometry optimization, ecodesign and other mass transfer-related risks (collapse, migration of chemicals). The three-dimensions (impacts, design, shelf-life) of the storage of alcoholic beverages in plastic containers are presented as a representative case-study of the multi-objective ecodesign problem and as an illustration of new trends to accelerate prototyping and innovation. The capacity to evaluate, maximize product shelf-life and minimize packaging waste was tested on 450 miniatures served usually in plane and train. Four alcoholic strengths (including pure water) and four storage conditions were considered. Several alternatives (900 different 3D designs) were explored by simulation and constrained optimization to reach the targeted shelf-life. The large set was used to establish the Pareto optimal design enabling to minimize weights while maximizing shelf-life. The approach is sufficiently versatile and flexible to adapt arbitrary designs and additional phenomena controlling shelf-life (aroma scalping, oxidation, migration of non-intentionally added substances).

Vegetables: New Zealand Children Are Not Eating Enough

We know that eating a variety of vegetables every day is associated with favorable health across the lifecourse. Internationally, food-based dietary guidelines encourage the consumption of a variety of vegetables and fruit but globally,people are not eating enough vegetables to meet the three-or-more-a-day guideline. Vegetables are good sources of vitamins and minerals, fiber, and many bioactive compounds that promote health and provide energy. They also help reduce hidden hunger (micronutrient deficiencies) and support the healthy growth and development of children. New Zealand is a world leader in the production of diverse nutrients and foods yet poverty and other environmental barriers mean only one in two children eats three-or-more servings of vegetables a day. Price and availability are limiting factors. The proliferation of community, school and home vegetable gardens and vegetable cooperatives may improve access. On a macro level, upstream policies such as a "living wage," affordable housing, and land-use planning are required. International dietary solutions include an agricultural shift to intensified horticulture with a focus on vegetables. The consumption of more plant-based foods including vegetables would reduce green-house gases, reduce land clearing, and help prevent diet-related disease if consumed daily across the lifecourse.