Interaction of melittin with glycosphingolipids and phospholipids in mixed monolayers at different temperatures. Effect of the lipid physical state

The reverse sequence of Aβ amyloid self-triggers isolated nano-fibers and oligomers in lipid environment

Nanostructured lipid/peptide film at air/water interface allow to build different molecular arrangements depending of peptide sequence, peptide proportion and type of lipid. We studied the surface properties of Aβ(1 -42) and its retro-isomer Aβ(42 -1) amyloid peptides mixed with 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) lipid at the air/water interface. In absence of lipids, pure form of both Aβ(1 -42) and Aβ(42 -1) form insoluble monolayer films without appreciable fibril-like structures despite the high interfacial confinement. We show the lipid/peptide interfacial organization depends on the reversing sequence peptide in lipid enriched environment. In POPC/Aβ(1 -42) mixed film we have observed network fibril-like structures. However, using Aβ(42 -1) retro-isomer peptide to form the mixed film, the induced structuration acquired an isolated fibers arrangement associated with oligomers. The above structures are clearly visualized at the interface by using Brewster Angle Microscopy. In the same way, the isolate fibers and oligomers become Thioflavin T positive when they are observed by Fluorescence Microscopy. Thus, we attributed an amyloid behavior at the air/water interface that was also evidenced by Scanning Electron Microscopy when the mixed film was transferred to mica support. Changes from an exclusive β-sheet in pure peptide to a notable increase in α-helix/unordered conformations were induced by the presence of the lipid keeping with fibril-like structures. We postulated that the amyloid fibril formation at the membrane interface not only depends on the interfacial lipid environment and the low amyloid peptide content but also by the reversing sequencing that imposed a differential lipid/peptide interaction at the interface. Despite the retro-isomer peptide has not impact nor the overall molecular hydrophobicity neither on the interfacial behavior although perform a "conformational selective process" that depends on the β-sheet and α-helix contents.

Melittin-Induced Structural Transformations in DMPG and DMPS Lipid Membranes: A Langmuir Monolayer and AFM Study

In this study, we explore the interactions between melittin, a cationic antimicrobial peptide, and model lipid membranes composed of the negatively charged phospholipids 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG) and 1,2-dimyristoyl-sn-glycero-3-phosphoserine (DMPS). Using the Langmuir monolayer technique and atomic force microscopy (AFM), we reveal novel insights into these interactions. Our key finding is the observation of the ripple phase in the DMPS bilayer on mica, a phenomenon not previously reported for negatively charged single bilayers. This discovery is significant given the critical role of phosphatidylserine (PS) in cancer biology and the potential of melittin as an anticancer agent. We also highlight the importance of subphase composition, as melittin interacts preferentially with lipids in the liquid-condensed phase; thus, selecting the appropriate subphase composition is crucial because it affects lipid behavior and consequently melittin interactions. Our results show that melittin incorporates into lipid monolayers in both liquid-expanded and liquid-condensed phases, enhancing membrane fluidity and disorder, but is expelled from DMPS in the solid phase. AFM imaging further reveals that melittin induces substantial structural changes in the DMPG membrane and forms the ripple phase in the DMPS bilayers. Despite these alterations, melittin does not cause pore formation or membrane rupture, suggesting strong electrostatic adsorption on the membrane surface that prevents penetration. These findings highlight the differential impacts of melittin on lipid monolayers and bilayers and underscore its potential for interacting with membranes without causing disruption.

Interfacial Aβ fibril formation is modulated by the disorder-order state of the lipids: The concept of the physical environment as amyloid inductor in biomembranes

The behavior of amphiphilic molecules such as lipids, peptides and their mixtures at the air/water interface allow us to evaluate and visualize the arrangement formed in a confined and controlled surface area. We have studied the surface properties of the zwitterionic DPPC lipid and Aβ(1-40) amyloid peptide in mixed films at different temperatures (from 15 to 40 °C). In this range of temperature the surface properties of pure Aβ(1-40) peptide remained unchanged, whereas DPPC undergoes its characteristic liquid-expanded → liquid-condensed bidimensional phase transition that depends on the temperature and lateral pressure. This particular property of DPPC makes it possible to dynamically study the influence of the lipid phase state on amyloid structure formation at the interface in a continuous, isothermal and abrupt change on the environmental condition. As the mixed film is compressed the fibril-like structure of Aβ(1-40) is triggered specifically in the liquid-expanded region, independently of temperature, and it is selectively excluded from the well-visible liquid condensed domains of DPPC. The Aβ amyloid fibers were visualized by using BAM and AFM and they were Thio T positive. In mixed DPPC/Aβ(1-40) films the condensed domains (in between 11 mN/m to 20 mN/m) become irregular probably due to the fibril-like structures is imposing additional lateral stress sequestering lipid molecules in the surrounding liquid-expanded phase to self-organize into amyloids.

Melittin-solid phospholipid mixed films trigger amyloid-like nano-fibril arrangements at air-water interface

We used the Langmuir monolayers technique to study the surface properties of melittin toxin mixed with either liquid-condensed DSPC or liquid-expanded POPC phospholipids. Pure melittin peptide forms stable insoluble monolayers at the air-water interface without interacting with Thioflavin T (Th-T), a sensitive probe to detect protein amyloid formation. When melittin peptide is mixed with DSPC lipid at 50 % of peptide area proportion at the surface, we observed the formation of fibril-like structures detected by Brewster angle microscopy (BAM), but they were not observable with POPC. The nano-structures in the melittin-DSPC mixtures became Th-T positive labeling when the arrangement was observed with fluorescence microscopy. In this condition, Th-T undergoes an unexpected shift in the typical emission wavelength of this amyloid marker when a 2D fluorescence analysis is conducted. Even when reflectivity analysis of BAM imaging evidenced that these structures would correspond to the DSPC lipid component of the mixture, the interpretation of ATR-FTIR and Th-T data suggested that both components were involved in a new lipid-peptide rearrangement. These nano-fibril arrangements were also evidenced by scanning electron and atomic force microscopy when the films were transferred to a mica support. The fibril formation was not detected when melittin was mixed with the liquid-expanded POPC lipid. We postulated that DSPC lipids can dynamically trigger the process of amyloid-like nano-arrangement formation at the interface. This process is favored by the relative peptide content, the quality of the interfacial environment, and the physical state of the lipid at the surface.

Gangliosides smelt nanostructured amyloid Aβ(1-40) fibrils in a membrane lipid environment

Gangliosides induced a smelting process in nanostructured amyloid fibril-like films throughout the surface properties contributed by glycosphingolipids when mixed with 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/Aβ(1-40) amyloid peptide. We observed a dynamical smelting process when pre-formed amyloid/phospholipid mixture is laterally mixed with gangliosides. This particular environment, gangliosides/phospholipid/Aβ(1-40) peptide mixed interfaces, showed complex miscibility behavior depending on gangliosides content. At 0% of ganglioside covered surface respect to POPC, Aβ(1-40) peptide forms fibril-like structure. In between 5 and 15% of gangliosides, the fibrils dissolve into irregular domains and they disappear when the proportion of gangliosides reach the 20%. The amyloid interfacial dissolving effect of gangliosides is taken place at lateral pressure equivalent to the organization of biological membranes. Domains formed at the interface are clearly evidenced by Brewster Angle Microscopy and Atomic Force Microscopy when the films are transferred onto a mica support. The domains are thioflavin T (ThT) positive when observed by fluorescence microscopy. We postulated that the smelting process of amyloids fibrils-like structure at the membrane surface provoked by gangliosides is a direct result of a new interfacial environment imposed by the complex glycosphingolipids. We add experimental evidence, for the first time, how a change in the lipid environment (increase in ganglioside proportion) induces a rapid loss of the asymmetric structure of amyloid fibrils by a simple modification of the membrane condition (a more physiological situation).

Aβ-Amyloid Fibrils Are Self-Triggered by the Interfacial Lipid Environment and Low Peptide Content

We studied the surface properties of Aβ(1-40) amyloid peptides mixed with 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) (liquid state) or 1,2-disteraoyl-phosphatidylcholine (DSPC) (solid state) phospholipids by using nanostructured lipid/peptide films (Langmuir monolayers). Pure Aβ(1-40) amyloid peptides form insoluble monolayers without forming fibril-like structures. In a lipid environment [phospholipid/Aβ(1-40) peptide mixtures], we observed that both miscibility and stability of the films depend on the peptide content. At low Aβ(1-40) amyloid peptide proportion (from 2.5 to 10% of peptide area proportion), we observed the formation of a fibril-like structure when mixed only with POPC lipids. The stability acquired by these mixed films is within 20-35 mN·m^-1 compatible with the equivalent surface pressure postulated for natural biomembranes. Fibrils are clearly evidenced directly from the monolayers by using Brewster angle microscopy. The so-called nanostructured fibrils are thioflavin T positive when observed by fluorescence microscopy. The amyloid fibril network at the surface was also evidenced by atomic force microscopy when the films are transferred onto a mica support. Aβ(1-40) amyloid mixed with the solid DSPC lipid showed an immiscible behavior in all peptide proportions without fibril formation. We postulated that the amyloid fibrillogenesis at the membrane can be dynamically nano-self-triggered at the surface by the quality of the interfacial environment, that is, the physical state of the water-lipid interface and the relative content of amyloid protein present at the interface.

Lipid-packing perturbation of model membranes by pH-responsive antimicrobial peptides

The indiscriminate use of conventional antibiotics is leading to an increase in the number of resistant bacterial strains, motivating the search for new compounds to overcome this challenging problem. Antimicrobial peptides, acting only in the lipid phase of membranes without requiring specific membrane receptors as do conventional antibiotics, have shown great potential as possible substituents of these drugs. These peptides are in general rich in basic and hydrophobic residues forming an amphipathic structure when in contact with membranes. The outer leaflet of the prokaryotic cell membrane is rich in anionic lipids, while the surface of the eukaryotic cell is zwitterionic. Due to their positive net charge, many of these peptides are selective to the prokaryotic membrane. Notwithstanding this preference for anionic membranes, some of them can also act on neutral ones, hampering their therapeutic use. In addition to the electrostatic interaction driving peptide adsorption by the membrane, the ability of the peptide to perturb lipid packing is of paramount importance in their capacity to induce cell lysis, which is strongly dependent on electrostatic and hydrophobic interactions. In the present research, we revised the adsorption of antimicrobial peptides by model membranes as well as the perturbation that they induce in lipid packing. In particular, we focused on some peptides that have simultaneously acidic and basic residues. The net charges of these peptides are modulated by pH changes and the lipid composition of model membranes. We discuss the experimental approaches used to explore these aspects of lipid membranes using lipid vesicles and lipid monolayer as model membranes.

Comparison between the behavior of different hydrophobic peptides allowing membrane anchoring of proteins

Membrane binding of proteins such as short chain dehydrogenase reductases or tail-anchored proteins relies on their N- and/or C-terminal hydrophobic transmembrane segment. In this review, we propose guidelines to characterize such hydrophobic peptide segments using spectroscopic and biophysical measurements. The secondary structure content of the C-terminal peptides of retinol dehydrogenase 8, RGS9-1 anchor protein, lecithin retinol acyl transferase, and of the N-terminal peptide of retinol dehydrogenase 11 has been deduced by prediction tools from their primary sequence as well as by using infrared or circular dichroism analyses. Depending on the solvent and the solubilization method, significant structural differences were observed, often involving α-helices. The helical structure of these peptides was found to be consistent with their presumed membrane binding. Langmuir monolayers have been used as membrane models to study lipid-peptide interactions. The values of maximum insertion pressure obtained for all peptides using a monolayer of 1,2-dioleoyl-sn-glycero-3-phospho-ethanolamine (DOPE) are larger than the estimated lateral pressure of membranes, thus suggesting that they bind membranes. Polarization modulation infrared reflection absorption spectroscopy has been used to determine the structure and orientation of these peptides in the absence and in the presence of a DOPE monolayer. This lipid induced an increase or a decrease in the organization of the peptide secondary structure. Further measurements are necessary using other lipids to better understand the membrane interactions of these peptides.

Self-assembly and lipid interactions of diacylglycerol lactone derivatives studied at the air/water interface

Synthetic diacylglycerol lactones (DAG-lactones) have been shown to be effective modulators of critical cellular signaling pathways. The biological activity of these amphiphilic molecules depends in part upon their lipid interactions within the cellular plasma membrane. This study explores the thermodynamic and structural features of DAG-lactone derivatives and their lipid interactions at the air/water interface. Surface-pressure/area isotherms and Brewster angle microscopy revealed the significance of specific side-groups attached to the terminus of a very rigid 4-(2-phenylethynyl)benzoyl chain of the DAG-lactones, which affected both the self-assembly of the molecules and their interactions with phospholipids. The experimental data highlight the formation of different phases within mixed DAG-lactone/phospholipid monolayers and underscore the relationship between the two components in binary mixtures of different mole ratios. Importantly, the results suggest that DAG-lactones are predominantly incorporated within fluid phospholipid phases rather than in the condensed phases that form, for example, by cholesterol. Moreover, the size and charge of the phospholipid headgroups do not seem to affect DAG-lactone interactions with lipids.

Biophysical properties of a synthetic transit peptide from wheat chloroplast ribulose 1,5-bisphosphate carboxylase

The surface properties of pure RuBisCo transit peptide (RTP) and its interaction with zwitterionic, anionic phospholipids and chloroplast lipids were studied by using the Langmuir monolayer technique. Pure RTP is able to form insoluble films and the observed surface parameters are compatible with an alpha-helix perpendicular to the interface. The alpha-helix structure tendency was also observed by using transmission FT-IR spectroscopy in bulk system of a membrane mimicking environment (SDS). On the other hand, RTP adopts an unordered structure in either aqueous free interface or in the presence of vesicles composed of a zwitterionic phospholipid (POPC). Monolayer studies show that in peptide/lipid mixed monolayers, RTP shows no interaction with zwitterionic phospholipids, regardless of their physical state. Also, with the anionic POPG at high peptide ratios RTP retains its individual surface properties and behaves as an immiscible component of the peptide/lipid mixed interface. This behaviour was also observed when the mixed films were composed by RTP and the typical chloroplast lipids MGDG or DGDG (mono- and di-galactosyldiacylglycerol). Conversely, RTP establishes a particular interaction with phosphatidylglycerol and cardiolipin at low peptide to lipid area covered relation. This interaction takes place with an increase in surface stability and a reduction in peptide molecular area (intermolecular interaction). Data suggest a dynamic membrane modulation by which the peptide fine-tunes its membrane orientation and its lateral stability, depending on the quality (lipid composition) of the interface.

Investigations of antimicrobial peptides in planar film systems

Planar systems--monolayers and films--constitute a useful platform for studying membrane-active peptides. Here, we summarize varied approaches for studying peptide organization and peptide-lipid interactions at the air/water interface, and focus on three representative antimicrobial membrane--associated peptides-alamethicin, gramicidin, and valinomycin. Experimental data, specifically surface pressure/area isotherms and Brewster angle microscopy images, provided information on peptide association and the effects of the lipid monolayers on peptide surface organization. In general, film analysis emphasized the effects of lipid layers in promoting peptide association and aggregation at the air/water interface. Importantly, the data demonstrated that in many cases peptide domains are phase-separated within the phospholipid monolayers, suggesting that this behavior contributes to the biological actions of membrane-active antimicrobial peptides.

Interfacial properties of the M1 segment of the nicotinic acetylcholine receptor

We have studied the thermodynamic, surface, and structural properties of alphaM1 transmembrane sequence of the nicotinic acetylcholine receptor (nAChR) by using Langmuir monolayer, FT-IR spectroscopy and molecular dynamics simulation techniques in membrane-mimicking environments. M1 spontaneously incorporates into a lipid-free air-water interface, showing a favourable adsorption free energy of -7.2 kcal/mol. A cross-sectional molecular area of 210 A(2)/molecule, a surface potential of 4.2 fV/molecule and a high stability of the film were deducted from pure M1 monolayers. FT-IR experiments and molecular dynamics simulations in membrane-mimicking environments (sodium-dodecyl-sulfate and CCl(4), respectively) indicate coexistence between helical and non-helical structures. Furthermore, mixed peptide-lipid monolayers and monolayer penetration experiments were performed in order to study the peptide-lipid interaction. Mixed with condensed lipids (dipalmitoyl-phosphocholine, and dipalmitoyl-phosphoglycerol), M1 shows immiscible/miscible behaviour at low/high peptide concentration, respectively. Conversely, a complete miscible peptide-lipid interface is observed with liquid-expanded lipids (palmitoyl-oleoyl-phosphocholine, and palmitoyl-oleoyl-phosphoglycerol). Peptide penetration experiments demonstrate that the M1 peptide preferentially interacts with zwitterionic phosphocholine interfaces.

Interactions of amphotericin B derivative of low toxicity with biological membrane components—the Langmuir monolayer approach

Amphotericin B (AmB)--a polyene macrolide antibiotic--exhibits strong antifungal activity, however, is known to be very toxic to mammalian cells. In order to decrease AmB toxicity, a number of its derivatives have been synthesized. Basing on in vitro and in vivo research, it was evidenced that one of AmB derivatives, namely N-methyl-N-D-fructopyranosylamphotericin B methyl ester (in short MF-AME) retained most of the antifungal activity of the parent antibiotic, however, exhibited dramatically lower animal toxicity. Therefore, MF-AME seems to be a very promising modification product of AmB. However, further development of this derivative as potential new antifungal drug requires the elucidation of its molecular mechanism of reduced toxicity, which was the aim of the present investigations. Our studies were based on examining the binding energies by determining the strength of interaction between MF-AME and membrane sterols (ergosterol-fungi sterol, and cholesterol-mammalian sterol) and DPPC (model membrane phospholipid) using the Langmuir monolayer technique, which serves as a model of cellular membrane. Our results revealed that at low concentration the affinity of MF-AME to ergosterol is considerably stronger as compared to cholesterol, which correlates with the improved selective toxicity of this drug. It is of importance that the presence of phospholipids is essential since--due to very strong interactions between MF-AME and DPPC--the antibiotic used in higher concentration is "immobilized" by DPPC molecules, which reduces the concentration of free antibiotic, thus enabling it to selectively interact with both sterols.

Surface behavior and lipid interaction of Alzheimer beta-amyloid peptide 1-42: a membrane-disrupting peptide

Amyloid aggregates, found in patients that suffer from Alzheimer's disease, are composed of fibril-forming peptides in a beta-sheet conformation. One of the most abundant components in amyloid aggregates is the beta-amyloid peptide 1-42 (Abeta 1-42). Membrane alterations may proceed to cell death by either an oxidative stress mechanism, caused by the peptide and synergized by transition metal ions, or through formation of ion channels by peptide interfacial self-aggregation. Here we demonstrate that Langmuir films of Abeta 1-42, either in pure form or mixed with lipids, develop stable monomolecular arrays with a high surface stability. By using micropipette aspiration technique and confocal microscopy we show that Abeta 1-42 induces a strong membrane destabilization in giant unilamellar vesicles composed of palmitoyloleoyl-phosphatidylcholine, sphingomyelin, and cholesterol, lowering the critical tension of vesicle rupture. Additionally, Abeta 1-42 triggers the induction of a sequential leakage of low- and high-molecular-weight markers trapped inside the giant unilamellar vesicles, but preserving the vesicle shape. Consequently, the Abeta 1-42 sequence confers particular molecular properties to the peptide that, in turn, influence supramolecular properties associated to membranes that may result in toxicity, including: 1), an ability of the peptide to strongly associate with the membrane; 2), a reduction of lateral membrane cohesive forces; and 3), a capacity to break the transbilayer gradient and puncture sealed vesicles.

Surface behaviour and peptide–lipid interactions of the antibiotic peptides, Maculatin and Citropin

Surface behaviour of Maculatin 1.1 and Citropin 1.1 antibiotic peptides have been studied using the Langmuir monolayer technique in order to understand the peptide-membrane interaction proposed as critical for cellular lysis. Both peptides have a spontaneous adsorption at the air-water interface, reaching surface potentials similar to those obtained by direct spreading. Collapse pressures (Pi(c), stability to lateral compression), molecular areas at maximal packing and surface potentials (DeltaV) obtained from compression isotherms of both pure peptide monolayers are characteristic of peptides adopting mainly alpha-helical structure at the interface. The stability of Maculatin monolayers depended on the subphase and increased when pH was raised. In an alkaline environment, Maculatin exhibits a molecular reorganization showing a reproducible discontinuity in the Pi-A compression isotherm. Both peptides in lipid films with the zwitterionic palmitoyl-oleoyl-phosphatidylcholine (POPC) showed an immiscible behaviour at all lipid-peptide proportions studied. By contrast, in films with the anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG), the peptides showed miscible behaviour when the peptides represented less than 50% of total surface area. Additional penetration experiments also demonstrated that both peptides better interact with POPG compared with POPC monolayers. This lipid preference is discussed as a possible explanation of their antibiotic properties.

Concerted modulation by myelin basic protein and sulfatide of the activity of phospholipase A2 against phospholipid monolayers

The effect of myelin basic protein (MBP) on the activity of phospholipase A2 (PLA2, EC 3.1.1.4) against monolayers of dilauroylphosphatidylcholine (dlPC) or dilauroylphosphatidic acid (dlPA) containing different proportions of sulfatide (Sulf) and galactocerebroside (GalCer) was investigated. MBP was introduced into the interface by direct spreading as an initial constitutive component of the lipid-protein film or by adsorption and penetration from the subphase into the preformed lipid monolayers. The effect of MBP on PLA2 activity depends on the type of phospholipid and on the proportion of MBP at the interface. At a low mole fraction of MBP, homogeneously mixed lipid-protein monolayers are formed, and the PLA2 activity against dlPC is only slightly modified while the degradation of dlPA is markedly inhibited. This is probably due to favorable charge-charge interactions between dlPA and MBP that interfere with the enzyme action. The PLA2 activity against either phospholipid is increased when the mole fraction of MBP exceeds the proportion at which immiscible surface domains are formed. GalCer has little effect on the modulation by MBP of the phospholipase activity. The effect of Sulf depends on its proportions in relation to MBP. The individual effects of both components balance each other, and a finely tuned modulation is regulated by the interactions of MBP with Sulf or with the phospholipid.

The monolayer technique: a potent tool for studying the interfacial properties of antimicrobial and membrane-lytic peptides and their interactions with lipid membranes

Erudites of the antiquity already knew the calming effect of oil films on the sea waves. But one had to wait until 1774 to read the first scientific report on oil films from B. Franklin and again 1878 to learn the thermodynamic analysis on adsorption developed by J. Gibbs. Then, in 1891, Agnes Pockels described a technique to manipulate oil films by using barriers. Finally, in 1917, I. Langmuir introduced the experimental and theoretical modern concepts on insoluble monolayers. Since that time, and because it has been found to provide invaluable information at the molecular scale, the monolayer technique has been more and more extensively used, and, during the past decade, an explosive increase in the number of publications has occurred. Over the same period, considerable and ever-increasing interest in the antimicrobial peptides of various plants, bacteria, insects, amphibians and mammals has grown. Because many of these antimicrobial peptides act at the cell membrane level, the monolayer technique is entirely suitable for studying their physicochemical and biological properties. This review describes monolayer experiments performed with some of these antimicrobial peptides, especially gramicidin A, melittin, cardiotoxins and defensin A. After giving a few basic notions of surface chemistry, the surface-active properties of these peptides and their behavior when they are arranged in monomolecular films are reported and discussed in relation to their tridimensional structure and their amphipathic character. The penetration of these antimicrobial peptides into phospholipid monolayer model membranes, as well as their interactions with lipids in mixed films, are also emphasized.

Evidence of a strong interaction of 2,4-dichlorophenoxyacetic acid herbicide with human serum albumin

The interaction of 2,4-dichlorophenoxyacetic acid herbicide (2,4-D) with human serum albumin (HSA) was studied using fluorescence and differential scanning calorimetry (DSC). Fluorescence displacement of 1-anilino-8-naphtalenesulfonate (ANS) bound to HSA was used to evaluate the binding affinity of 2,4-D to HSA. The binding is associated to a high affinity site of HSA located in the IIIA subdomain. The association constant (Kass) of the herbicide was about 5 microM(-1), several times higher than the affinity found for pharmaceutical compounds. This relatively strong interaction with HSA was evidenced by the increase in HSA protein thermostability induced as consequence of herbicide interaction. 2,4-D induces an increase in the midpoint of thermal denaturation temperature from 60.1 degrees C in herbicide free solution to 75.6 degrees C in full ligand saturating condition. The calorimetric enthalpy and the excess heat capacity also increased upon 2,4-D binding. To investigate the possibility of other/s system/s of 2,4-D transport in blood, besides of HSA, the interaction of the herbicide with lipid monolayers was explored. No interaction was detected with any of the lipids tested. The overall results provided evidence that high affinity 2,4-D-HSA complex exhibits enhanced thermal stability and that HSA is the unique transport system for 2,4-D in blood.

Interaction of a basic amphipathic peptide from the carboxyterminal part of the HIV envelope protein gp41 with negatively charged lipid surfaces

The interaction of the positively charged synthetic amphipathic peptide fragment gp41(828) corresponding to a segment from the carboxyterminal region of the HIV envelope glycoprotein gp41 with lipid monolayers spread at the air-water interface has been studied by film balance measurements. The peptide itself does not form a stable monolayer but interacts with phospholipids spread together on the aqueous surface. Upon compression of a mixed phosphatidylcholine-peptide monolayer the peptide is irreversibly squeezed out of the lipid-peptide monolayer. In contrast, with negatively charged phosphatidylglycerol stable lipid-peptide monolayers are formed even in the presence of up to 30 mol% peptide. The monolayer may be expanded and compressed repeatedly without significant loss of substance. After addition of calcium ions to the subphase of a phosphatidylglycerol-peptide monolayer the peptide is to some extent excluded from the monolayer. In contrast to phosphatidylcholine monolayers this process is partly reversible and the excluded material is reincorporated into the film during subsequent expansion. We conclude that attached to the headgroups of the lipid monolayer a peptide-layer stabilized at the surface by electrostatic interactions is formed. The surface action may lead to rigidified lipid-peptide domains causing an increased membrane permeability which might correspond to a cytopathologic function of the protein fragment.

Interaction of alpha-MSH and substance P with interfaces containing gangliosides

In the present work we studied the interaction of alpha-MSH and substance P neuropeptides with gangliosides using lipid monolayers, fluorescence spectroscopy, and differential scanning calorimetry techniques. The positively charged weak amphiphilic neuropeptides did not show surface activity in the range of concentrations tested (0.1-0.3 muM), but they were preferentially able to penetrate monolayers formed by acidic lipids, showing the best interaction with the more complex gangliosides. The general order of interaction found for both peptides is GTIh > GDIa = GMI > DLPA > sulphatide. Neither neuropeptide interacted with phosphatidylcholine monolayers above 10 mN.m-1. The binding of alpha-MSH to GMI micelles followed by changes in the fluorescence of its tryptophan residue takes place with an increase in the hydrophobic environment of the neuropeptide. An apparent dissociation constant of 13 muM was estimated for this process. Similar result was found with GMI:DMPC vesicles (1:10 molar ratio). The thermotropic profile of GMI micelles is modified in the presence of the neuropeptides. The calorimetric enthalpy of GMI transition increased 21% and 37% in the presence of alpha-MSH and substance P, respectively. Both neuropeptides induced the same increment in the transition temperature Tm from 19 to 20.5 degrees C. The basic physicochemical studies herein indicated that both positively charged neuropeptides, alpha-MSH and substance P, interact with interfaces containing gangliosides in a mainly electrostatic form, whereas the hydrophobic interaction seems to play a secondary role.

Surface topography of sulfatide and gangliosides in unilamellar vesicles of dipalmitoylphosphatidylcholine

The property of the dyes, acridine orange and methylene blue, to exhibit metachromatic changes upon binding to negatively charged groups that are within a defined spatial separation was employed to study the lateral and transverse topography of sulfatide and gangliosides GM1 and GD1a mixed with dipalmitoylphosphatidylcholine (DPPC) in unilamellar vesicles. The spectral changes of the dyes in the presence of liposomes containing anionic glycosphingolipids (GSLs) (hypochromism and frequency shift) are typical of polyanionic lattices while minor changes are found for neutral lipids. The metachromatic changes are abolished by the presence of Ca2+ in the external medium. The proportion of anionic GSLs accessible to the dyes on the external surface of the liposomes is greater as the GSLs are more complex (sulfatide less than GM1 less than GD1a) and as its proportion in the mixture decreases. The number of molecules of anionic GSLs that are laterally distributed on the external surface in a position favorable for the formation of dye dimers (at intermolecular distances not exceeding 1 nm) is greater for sulfatide than for ganglioside. This is correlated to the greater intermolecular distances and delocalization in ganglioside-, compared to sulfatide-containing interfaces. The experimental values indicate that the mixture with DPPC of any of the anionic GSLs studied behaves as if it was more enriched in the GSLs compared to the proportions of the whole mixture.