Retention behaviour of polar compounds using porous graphitic carbon with water-rich mobile phases

Analysis of human biological samples using porous graphitic carbon columns and liquid chromatography-mass spectrometry: a review

Liquid chromatography-mass spectrometry (LC-MS) has emerged as a powerful analytical technique for analyzing complex biological samples. Among various chromatographic stationary phases, porous graphitic carbon (PGC) columns have attracted significant attention due to their unique properties-such as the ability to separate both polar and non-polar compounds and their stability through all pH ranges and to high temperatures-besides the compatibility with LC-MS. This review discusses the applicability of PGC for SPE and separation in LC-MS-based analyses of human biological samples, highlighting the diverse applications of PGC-LC-MS in analyzing endogenous metabolites, pharmaceuticals, and biomarkers, such as glycans, proteins, oligosaccharides, sugar phosphates, and nucleotides. Additionally, the fundamental principles underlying PGC column chemistry and its advantages, challenges, and advances in method development are explored. This comprehensive review aims to provide researchers and practitioners with a valuable resource for understanding the capabilities and limitations of PGC columns in LC-MS-based analysis of human biological samples, thereby facilitating advancements in analytical methodologies and biomedical research.

Enhancing enantiomeric and diastereomeric separations: A single chromatograph approach for two-dimensional heart-cut methodology

A high-performance chromatograph was adapted and reconfigured to establish a two-dimensional methodology for separations that are not easily achievable using a single enantioselective column. Allethrin, a pyrethroid used widely as a pesticide in domestic environments, was chosen as the model analyte. With three chiral centers, it has eight stereoisomers and is considered one of the more difficult chiral separations. Diastereomeric separation was achieved in the first dimension using a shape-selective stationary phase based on ultrapure porous graphitic carbon (particle diameter, 3 μm) in the reversed phase mode. Advanced asymmetric bidirectional peak functions (half-Gaussian modified Gaussian and exponentially modified Gaussian) were employed to extract overlapping peak areas. The four diastereomeric peaks were heart-cut and sent to the second dimension online using a standard six-port 2-position rotary valve. Enantiomeric separation was attained in the second dimension using an immobilized-cellulose tris(3,5-dichlorophenylcarbamate) column (3 μm) with chromatographic resolutions >2.7 for all enantiomeric pairs. The second dimension method was developed using the information from circular dichroism detection. The baseline separation of seven peaks of allethrin in a single dimension was also demonstrated using (2-hydroxypropyl)-β-cyclodextrin. The enantiomeric purity of a purified formulation of allethrin in a commercial pesticide was validated using the developed 2D approach.

Isomeric Separation of N-Glycopeptides Derived from Glycoproteins by Porous Graphitic Carbon (PGC) LC-MS/MS

Protein glycosylation is involved in many biological processes and physiological functions. Despite the recent advances in LC-MS/MS methodologies, the profiling of site-specific glycosylation is one of the major analytical challenges of glycoprotein analysis. Herein, we report that the separation of glycopeptide isomers on porous graphitic carbon (PGC)-LC was significantly improved by elevating the separation temperature under basic mobile phases. These findings permitted the isomeric separation of glycopeptides resulting from highly specific enzymatic digestions. The selectivity for different glycan types was studied using bovine fetuin, asialofetuin, IgG, ribonuclease B, and alpha-1 acid glycoprotein (AGP) by PGC-LC-MS. Comprehensive structural isomeric separation of glycopeptides was observed by high-resolution MS and confirmed by MS/MS. The specific structures of the glycopeptide isomers were identified and confirmed through exoglycosidase digestions. Glycosylation analysis of human AGP revealed the potential use of PGC-LC-MS for extensive glycoprotein analysis for biomarker discovery. This newly developed separation technique was shown as a reproducible and useful analytical method to study site-specific isomeric glycosylation.

Development and validation of a selective and effective pressurized liquid extraction followed by liquid chromatography-mass spectrometry method for the determination of fructosazine analogues in the ammonia treated extract of Eugenia jambolana Lamarck seeds

This study describes a selective and effective pressurized liquid extraction (PLE) coupled with HPLC-DAD-ESI/MS method for the identification and quantification of three fructosazine analogues (FZAs), fructosazine, 2,6- and 2,5-deoxyfructosazine in Madeglucyl^® (MG) which is an ammonia treated extract of Eugenia jambolana Lamarck seeds, and is the world's first anti-diabetic phytodrug. FZAs were extracted from MG by PLE using methanol as extraction solvent. The PLE extract was then analyzed directly by HPLC-DAD-ESI/MS without cleanup step. Chromatographic separation of these highly related structures was achieved on a porous graphic carbon (PGC) column. The identification of the target FZAs was confirmed by the similar retention time, similar UV and MS spectra to the corresponding pure standards. The quantification was performed by using an electrospray positive ionization mass spectrometry in the selected ion monitoring (SIM) mode. The PLE procedure was optimized and overall method was validated in terms of sensitivity, linearity, selectivity and matrix effect, precision, accuracy and recovery, and stability of the target FZAs in the aqueous solution and in the PLE extracts solution of MG. The developed method was proved to be selective, sensitive, precise, accurate for the quantification of FZAs in MG.

Diazonium modification of porous graphitic carbon with catechol and amide groups for hydrophilic interaction and attenuated reversed phase liquid chromatography

Porous graphitic carbon (PGC) is an increasingly popular and attractive phase for HPLC on account of its chemical and thermal stability, and its unique separation mechanism. However, native PGC is strongly hydrophobic and in some instances excessively retentive. As part of our effort to build a library of hydrophilic covalently modified PGC phases, we functionalized PGC with catechol and amide groups by means of aryl diazonium chemistry to produce two new phases. Successful grafting was confirmed by X-ray photoelectron spectroscopy (XPS). Under HILIC conditions, the Catechol-PGC showed up to 5-fold increased retention relative to unmodified PGC and selectivity that differed from four other HILIC phases. Under reversed phase conditions, the Amide-PGC reduced the retentivity of PGC by almost 90%. The chromatographic performance of Catechol-PGC and Amide-PGC is demonstrated by separations of nucleobases, nucleosides, phenols, alkaline pharmaceuticals, and performance enhancing stimulants. These compounds had retention factors (k) ranging from 0.5 to 13.

Application of Carbonaceous Materials in Separation Science

Porous carbons in the separation sciences occupy an important niche owing to their unique retention characteristics, chemical stability and the ability to control pore structure through template strategies. However, these same synthetic processes utilise oil-based carbonising resins and high temperature, energy-intensive pyrolysis steps to ensure the carbon product has pore-size regularity, minimal micropore content and homogeneous surface chemistry. This chapter will primarily focus on the development of porous carbons for application as chromatographic stationary phases. Discussion will cover the unique characteristics of the porous carbon retention mechanism and its application in separating a broad range of analyte classes. The chapter then moves on to describe the current disadvantages in the manufacture of commercially available carbon phase and then highlight recent efforts aimed at the development of alternative porous carbon stationary phases derived from sustainable carbon precursors.

Carboxylate modified porous graphitic carbon: a new class of hydrophilic interaction liquid chromatography phases

Stationary phases for hydrophilic interaction liquid chromatography (HILIC) are predominantly based on silica and polymer supports. We present porous graphitic carbon particles with covalently attached carboxylic acid groups (carboxylate-PGC) as a new HILIC stationary phase. PGC particles were modified by adsorbing the diazonium salt of 4-aminobenzoic acid onto the PGC, followed by reduction of the adsorbed salt with sodium borohydride. The newly developed carboxylate-PGC phase exhibits different selectivity than that of 35 HPLC columns, including bare silica, zwitterionic, amine, reversed, and unmodified PGC phases. Carboxylate-PGC is stable from pH 2.0 to 12.6, yielding reproducible retention even at pH 12.6. Characterization of the new phase is presented by X-ray photoelectron spectroscopy, thermogravimetry, zeta potentials, and elemental analysis. The chromatographic performance of carboxylate-PGC as a HILIC phase is illustrated by separations of carboxylic acids, nucleotides, phenols, and amino acids.

Quantification of 4-methylimidazole in class III and IV caramel colors: validation of a new method based on heart-cutting two-dimensional liquid chromatography (LC-LC)

4-Methylimidazole (4MeI) is a nitrogen compound formed during the manufacture of class III and IV caramel colors. The European Commission has limited its content to 250 ppm. Two methods were compared to perform 4MeI quantification in caramels. The first one, currently used and considered to be the reference method, consists of a hot extraction of caramel color with dichloromethane and an analysis of the acetyl derivative of the extract by gas chromatography coupled to mass spectrometry (GC-MS). The second method is based on the heart-cutting two-dimensional liquid chromatography technique (LC-LC) to directly separate 4MeI from the other components present in caramel color sample (diluted in water) in <30 min. The accuracy profile validation method and the comparison between the results obtained with the two methods show that the new and completely automated LC-LC method is usable to quantify 4MeI in caramels.

Effects of the redox state of porous graphitic carbon on the retention of oligosaccharides

Retention of hydrophilic compounds on porous graphitic carbon (PGC) is afforded by polar interactions with induced dipoles within this polarizable stationary phase. These interactions depend on the redox state of PGC, which can be influenced by application of an electrical field or by chemical means. We explored the impact of oxidizing and reducing agents on the retention of fluorescence labeled neutral oligosaccharides. Malto-oligosaccharides were employed as simple model system. Subsequently, the effects on the retention of glycans typical for immunoglobulin G (IgG) antibodies were investigated. Chemical oxidation of the PGC surface increased the retention of all analytes tested. Selectivities were significantly altered by the redox treatment, emphasizing the need for controlling the redox state of PGC to achieve reproducible conditions. Furthermore a column pre-conditioning protocol is presented, which allowed for reproducible chromatography of neutral IgG glycans.

Determination of S-Adenosylmethionine and S-Adenosylhomocysteine by LC-MS/MS and evaluation of their stability in mice tissues

S-Adenosylmethionine (SAM) serves as a methyl donor in biological transmethylation reactions. S-Adenosylhomocysteine (SAH) is the product as well as the inhibitor of transmethylations and the ratio SAM/SAH is regarded as the measure of methylating capacity (“methylation index”). We present a rapid and sensitive LC–MS/MS method for SAM and SAH determination in mice tissues. The method is based on chromatographic separation on a Hypercarb column (30 mm × 2.1 mm, 3 μm particle size) filled with porous graphitic carbon stationary phase. Sufficient retention of SAM and SAH on the chromatographic packing allows simple sample preparation protocol avoiding solid phase extraction step. No significant matrix effects were observed by analysing the tissue extracts on LC–MS/MS. The intra-assay precision was less than 9%, the inter-assay precision was less than 13% and the accuracy was in the range 98–105% for both compounds. Stability of both metabolites during sample preparation and storage of tissue samples was studied: the SAM/SAH ratio in liver samples dropped by 34% and 48% after incubation of the tissues at 4 °C for 5 min and at 25 °C for 2 min, respectively. Storage of liver tissues at −80 °C for 2 months resulted in decrease of SAM/SAH ratio by 40%. These results demonstrate that preanalytical steps are critical for obtaining valid data of SAM and SAH in tissues.

Stability indicating method for famotidine in pharmaceuticals using porous graphitic carbon column

A simple, sensitive and rapid HPLC method was developed and validated for the simultaneous determination of famotidine (FMT) and related impurities in pharmaceuticals. Chromatographic separation was accomplished within 10 min on a porous graphitic carbon (PGC) column using 50:50 v/v ACN-water containing 0.5% pentane sulphonic acid (PSA) as the mobile phase. Separation was achieved with a flow rate of 1 mL/min and a detection wavelength of 265 nm. The calibration curves were linear over a concentration range of 1.5-100 microg/mL. The intra- and interday RSDs (n = 5) for the retention times and peak area were all less than 2%. The method was sensitive with an LOD (S/N = 3) of 0.1 microg/mL for FMT, imp. C and 0.05 microg/mL for imp. 2, A and D. All recoveries were greater than 98%. The method was demonstrated to be precise, accurate and specific with no interference from the tablet ingredients and separation of the drug peak from the peaks of the degradation products (oxidative degradation and acid and base degradation). The results indicated that the proposed method could be used for the determination of FMT in commercial dosage forms and as a stability-indicating assay.

Structure–retention relationship study of diastereomeric (Z)- and (E)-2-alkylidene-4-oxothiazolidines

Quantitative structure-retention relationship (QSRR) was developed for a series of the (Z)- and (E)-2-alkylidene-4-oxothiazolidine derivatives by the multiple linear regression (MLR) analysis. Full geometry optimization based on Austin Model 1 (AM1) semiempirical molecular orbital method was carried out and a set of physicochemical molecular descriptors was calculated from the optimized structures. In order to obtain useful experimental parameters, the lipophilic character of analytes was measured by RP-TLC, and lipophilicity parameters were correlated with physicochemical structural descriptors. Statistically significant and physically meaningful structure-retention relationships were obtained.

Retention behaviour of polyunsaturated fatty acid methyl esters on porous graphitic carbon

Retention with porous graphitic carbon was investigated with 25 structures of fatty acid methyl esters (FAMEs) with two different mobile phases: CH(3)CN:CHCl(3) 60:40 (v/v) and CH(3)OH:CHCl(3) 60:40 (v/v) with both 0.1% triethylamine (TEA) and an equimolar amount of HCOOH. Preliminary results showed that the use of TEA/HCOOH led to the response increase of saturated FAMEs with evaporative light scattering detection. No increase was observed for unsaturated one. These modifiers may slightly reduce the retention of FAMEs but did not significantly modify the separation factor with porous graphitic carbon. Thermodynamic parameters were calculated for each structure using Van't Hoff plot measured over the temperature range from 10 to 50 degrees C, with the both mobile phase conditions. All the studied compounds were found linked by the same retention mechanism on porous graphitic carbon. Quantitative in silico analysis of the retention using a molecular mechanics calculation demonstrated a good correlation between the retention factors and the molecular interaction energy values (r>0.93). Especially the Van der Waals energy was predominant, and the contribution of electrostatic energy was negligible for the quantitative analysis of the retention. The results indicate that Van der Waals force, hydrophobic interaction, is predominant for the retention of FAMEs on this packing material. The relative retention for highly unsaturated homologues can be changed by the selection of the weak solvent CH(3)CN or CH(3)OH. Then isomers differing only in the position of the carbon double bond on the alkyl chain can be separated and their behaviour is summarised as the closer the carbon double bonds to the FAME polar head, the more the retention decreases. Finally, the more important the number of carbon double bonds in the alkyl chain is, the smaller the retention is.

Identification of major metal complexing compounds in Blepharis aspera

Verbascoside and isoverbascoside, present at 0.7% and 0.2% (w/w dryweight), were identified to be major compounds that could contribute to the metal complexation in Blepharis aspera collected in Botswana, Africa. The metallophyte B. aspera has high ability to cope with a high level of metal accumulation. The presence of metal complexing compounds and/or antioxidants can prevent oxidative reactions in lipids, proteins and DNA that take place due to the metal accumulation. On-line liquid chromatography-solid phase extraction-nuclear magnetic resonance (LC-SPE-NMR) was applied for the identification, while electrospray-mass spectrometry (ESI-MS) and UV-vis spectroscopy was used to assess whether these compounds can complex with metals. It was found that verbascoside and isoverbascoside may form complexes with nickel, iron (verbascoside only) and copper. Thus, the presence of verbascoside and isoverbascoside can explain the survival of B. aspera in mineral-rich areas.

Use of porous graphitic carbon for the analysis of nitrate ester, nitramine and nitroaromatic explosives and by-products by liquid chromatography–atmospheric pressure chemical ionisation-mass spectrometry

A new LC/MS method was developed for the analysis of sixteen different analytes including the most common organic explosives encountered in forensic investigations. The separation was achieved using a porous graphitic carbon (PGC) column with a binary gradient elution. Molecular modeling suggested a possible interpretation for the elution order of explosive compounds on PGC. The introduction of ammonium formate in the mobile phase resulted in the formation of characteristic adduct ions thus enhancing the mass spectrometric detection of nitrate ester and nitramine compounds. Atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) were compared in terms of sensitivity. The final LC/APCI-MS method allowed easy identification of investigated compounds with limits of detection ranging from 0.04 to 1.06 ng/microl. The analysis of simulated forensic samples confirmed the performance of the method.

Limitations of porous graphitic carbon as stationary phase material in the determination of catecholamines

A fast and sensitive capillary liquid chromatography (cLC) column-switching method with electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) detection for the simultaneous determination of dopamine (D), epinephrine (E), norepinephrine (NE) and serotonin (SE) was pursued. A sample volume of 100 microl was loaded with a mobile phase containing 0.1% pentafluoropropionic acid (PFPA) as ion-pairing agent on a 25 mm x 0.32 mm (i.d.) 5 microm Hypercarb column. A water-acetonitrile (AcN) gradient with 0.1% acetic acid (AcOH) backflushed the compounds onto a 34 mm x 0.32 mm (i.d.) 5 microm Hypercarb analytical column. However, during a series of analyses, oxidation of the catecholamines (CAs) was observed. This was suspected to be due to the loading mobile phase composition and precluded the usefulness of this method even though the achievable detection limit was in the range of 0.75-3.0 ng/ml. The combination of the porous graphitic carbon (PGC) material and the fluorinated strong acids which were required to get enough retention for preconcentration of large volumes cannot be used for easily oxidized compounds as the CAs.

Intermolecular interactions on multiwalled carbon nanotubes in reversed-phase liquid chromatography

Retention on multiwalled carbon nanotubes (MWCNTs) in RPLC has been correlated with solute descriptors of dispersion, polarizability, dipolarity, hydrogen bond donor acidity, and hydrogen bond acceptor basicity through the use of the linear solvation energy relationship. Intermolecular interactions influencing solute retention on MWCNTs were compared with those on a graphitic carbon-deposited zirconia and a common RPLC stationary phase, octylsilane-bonded silica.

Controlling LC–SPE–NMR systems

There are several stages of the LC-SPE-NMR process that should be monitored closely to ensure an efficient isolation and concentration of the target analyte, for instance analyte break-through and compound transfer from the LC-SPE to the NMR probe. In this study, analyte break-through monitoring was performed with a UV detector and a mass spectrometer placed after the SPE unit. Easy break-through was a problem when attempting multiple trapping of various compounds using C18 SPE cartridges with the original commercial system. However, on lowering the flow rate over the SPE system and using SPE cartridges packed with porous carbon, the number of trappings possible increased five-fold. To increase control over the on-line SPE-NMR transfer, a gradient pump-UV system was used to elute compounds trapped on an SPE to an NMR probe. The analyte band was placed in the active volume of the probe by a stop-flow mechanism. The modified LC-SPE system was also coupled with off-line NMR analysis for determination of a degradation product of the insecticide monuron, present in the low ppm range.

Determination and characterization of organic explosives using porous graphitic carbon and liquid chromatography–atmospheric pressure chemical ionization mass spectrometry

A new LC-MS method for the determination and characterization of three groups of commonly used organic explosives (nitroaromatic compounds, cyclic nitroamines and nitrate esters) was developed using a porous graphitic carbon (PGC) (Hypercarb) column. Twenty-one different explosive-related compounds--including 2,4,6-trinitrotoluene, its by-products and its degradation products--were chromatographically separated in a single analysis. This efficient separation facilitates the identification of the manufacturer of the explosive using the identified analytes as a fingerprint. A final, conclusive identification of the analytes can be obtained using LC-MS equipped with an atmospheric pressure chemical ionization (APCI) interface. Solvent effects on chromatographic behaviour were investigated, as were the effects of solvent mixtures and mobile phase additives. The number and the relative positions of the nitro groups within analyte molecules influence their order of elution; these effects were investigated. The data thus generated can be interpreted to support a hypothesis concerning the retention mechanism of nitro-containing compounds when using PGC. Limits of detection ranged from 0.5 to 41.2 ng. The new methodology described herein improves the sensitivity and selectivity of explosive detection. The effectiveness of the method is demonstrated by the analysis of soil samples containing explosives residue from test fields in Sweden and Afghanistan.

Analysis of proteoglycans derived sulphated disaccharides by liquid chromatography/mass spectrometry

A method has been developed for the identification and quantitative determination of sulphated disaccharides derived from chondroitin sulphate (CS) and dermatan sulphate (DS) chains attached to proteoglycans (PGs). After digestion with Chondroitinase ABC, the pool of disaccharides can be directly separated by liquid chromatography on a porous graphitized carbon (PGC) column and identified by on-line electrospray mass spectrometry under negative ionization conditions. The relative intensities of the fragment ions obtained by MS/MS allow to distinguish the sulphate position. Calibration with standard disaccharides allows the quantification of the different isomers. The method showed good repeatability in terms of relative standard deviation (RSD < 2%) and linearity between 0.5 and 50 ng (total injected amount) for both 4- and 6-sulphated disaccharides. The limit of detection achieved in full scan mode was 0.1 ng. The methodology was applied to different types of biological samples obtained from patients suffering from chronic lung inflammation such as: lung tissue, bronchoalveolar lavage fluid (BALF), induced sputum and urine.

Wheat digalactosyldiacylglycerol molecular species profiling using porous graphitic carbon stationary phase

The potential of porous graphitic carbon stationary phase (PGC) was assessed for the separation of molecular species of digalactosyldiacylglycerol (DGDG). Detection was by an evaporative light scattering detector (ELSD). A conventional optimization strategy allowed definition of a quaternary non-aqueous mobile phase and separation of 9 wheat DGDG molecular species with isocratic elution: methanol/toluene/tetrahydrofuran/chloroform 64.3/21.5/13.7/0.5 v/v with 0.1% of triethylamine and a stoichiometric amount of formic acid. The molecular species were identified by LC/MS. The chromatographic behavior of DGDG on PGC was then compared to previous studies. The addition of a carbon double bond on the alkyl chain decreased the retention. This contribution was less important when the number of unsaturations increased in the alkyl chain. The consequence of this retention behavior with PGC was an elution order of molecular species which did not agree with the partition number as observed with C18 grafted stationary phases.

Thermally-treated clay as a stationary phase in liquid chromatography

Spray-dried, spherical synthetic hectorite particles have been thermally-treated at 500 degrees C for 16 h and used as adsorbent materials in reversed-phase liquid chromatography. The retention of a 22 mono and disubstituted aromatic compounds was evaluated to study the retention mechanisms on the clay mineral. The retention of solutes on the thermally-treated clays was markedly different than that measured on octadecylsilica (ODS) columns under identical conditions, but remarkably similar to retention characteristics of the same solutes on porous graphitic carbon columns. The clay columns exhibit an enhanced selectivity over the ODS column in separation of nitroaromatic positional isomers. Under identical mobile phase compositions, a selectivity, alpha, of 7.15 between ortho- and para-dinitrobenzene isomers was measured on the clay column compared to a alpha of 1.04 on the ODS column.

Elucidation of retention mechanisms on hypercrosslinked polystyrene used as column packing material for high-performance liquid chromatography

Establishing of basic retention mechanisms was considered the key target during the development of new column packing materials. To extract, from an appropriate retention data matrix on hypercrosslinked polystyrene Chromalite 5HGN, certain factors that can be brought in an obvious correspondence with known retention mechanisms, the principal component analysis (PCA) was applied. The approach was used to elucidate the adsorption properties of the above novel HPLC packing. Besides HPLC, knowledge of retention mechanisms helps to reveal perspective application area for the hypercrosslinked polystyrene-type materials in solid-phase extraction (SPE) and low-pressure preparative LC.

Separation of polar compounds using carbon columns

The objective of this review with 122 references is to provide structure and retention mechanisms of porous graphitic carbon by chromatographic analysis and computational chemical analysis of retention mechanisms. Synthesis methods of porous graphitic carbon are described. Applications for use as matrix for dynamic coating on porous graphitic carbon and direct separation of polar compounds on porous graphitic carbon demonstrated that the physical and chemical stability of graphitic carbons performed in both chromatography and extraction, especially for polar compounds, those are difficult on both silica-based and organic polymer-based packing materials. The disadvantage is difficult desorption of non-polar compounds adsorbed on the surface. The development of 3.5-microm particles improves the separation power of graphitic carbon columns with the high theoretical plate number.