Bacterial transformation by electroporation

Electrotransformation of thermophilic bacterium Caldimonas manganoxidans

Caldimonas manganoxidans is a Gram-negative, thermophilic, bioplastic-producing bacterium that is a promising strain to overcome the drawbacks of existing bioplastic manufacturing methods. However, genetic manipulation of this species has not previously been studied. Here, we developed an optimized electrotransformation protocol for C. manganoxidans by screening conditions, including the bacterial growth phase, electroporation buffer, pulse strength, and recovery time. The optimized transformation protocol obtained (3.1 ± 0.78) × 10⁸ colony-forming units/μg DNA of plasmid pBBR1MCS-2. High transformation efficiency was observed when using plasmid DNA isolated from C. manganoxidans. The DNA methylases of Escherichia coli did not affect the transformation efficiency of C. manganoxidans. The electrotransformation technique proposed here will be beneficial for the genetic manipulation of thermophilic Caldimonas species.

Gene transfer to plants by electroporation: methods and applications

Developing gene transfer technologies enables the genetic manipulation of the living organisms more efficiently. The methods used for gene transfer fall into two main categories; natural and artificial transformation. The natural methods include the conjugation, transposition, bacterial transformation as well as phage and retroviral transductions, contain the physical methods whereas the artificial methods can physically alter and transfer genes from one to another organisms' cell using, for instance, biolistic transformation, micro- and macroinjection, and protoplast fusion etc. The artificial gene transformation can also be conducted through chemical methods which include calcium phosphate-mediated, polyethylene glycol-mediated, DEAE-Dextran, and liposome-mediated transfers. Electrical methods are also artificial ways to transfer genes that can be done by electroporation and electrofusion. Comparatively, among all the above-mentioned methods, electroporation is being widely used owing to its high efficiency and broader applicability. Electroporation is an electrical transformation method by which transient electropores are produced in the cell membranes. Based on the applications, process can be either reversible where electropores in membrane are resealable and cells preserve the vitality or irreversible where membrane is not able to reseal, and cell eventually dies. This problem can be minimized by developing numerical models to iteratively optimize the field homogeneity considering the cell size, shape, number, and electrode positions supplemented by real-time measurements. In modern biotechnology, numerical methods have been used in electrotransformation, electroporation-based inactivation, electroextraction, and electroporative biomass drying. Moreover, current applications of electroporation also point to some other uncovered potentials for various exploitations in future.

Methods to Study Fitness and Compensatory Adaptation in Plasmid-Carrying Bacteria

Mobile genetic elements such as plasmids mediate horizontal gene transfer in prokaryotes, promoting bacterial adaptation and evolution. Despite the potential advantages conferred by these genetic elements, plasmids can also produce a fitness cost when they arrive to a new host. This initial burden is one of the main limits to the spread of plasmids in bacterial populations. However, plasmid costs can be ameliorated over time through compensatory mutations in the plasmid or the chromosome (compensatory adaptation). Understanding the origin of the cost produced by plasmids and the potential for compensatory adaptation is crucial to predict the spread and evolution of plasmid-mediated traits, such as antibiotic resistance. Here, we describe a simple protocol designed to analyze the fitness effects of a plasmid in a new host bacterium. We also provide a method to examine the potential for compensatory adaptation, using experimental evolution, and to elucidate if compensation originates in the plasmid, the bacterium, or both.

A Modified Shuttle Plasmid Facilitates Expression of a Flavin Mononucleotide-Based Fluorescent Protein in Treponema denticola ATCC 35405

Oral pathogens, including Treponema denticola, initiate the dysregulation of tissue homeostasis that characterizes periodontitis. However, progress of research on the roles of T. denticola in microbe-host interactions and signaling, microbial communities, microbial physiology, and molecular evolution has been hampered by limitations in genetic methodologies. This is typified by an extremely low transformation efficiency and inability to transform the most widely studied T. denticola strain with shuttle plasmids. Previous studies have suggested that robust restriction-modification (R-M) systems in T. denticola contributed to these problems. To facilitate further molecular genetic analysis of T. denticola behavior, we optimized existing protocols such that shuttle plasmid transformation efficiency was increased by >100-fold over prior reports. Here, we report routine transformation of T. denticola ATCC 35405 with shuttle plasmids, independently of both plasmid methylation status and activity of the type II restriction endonuclease encoded by TDE0911. To validate the utility of this methodological advance, we demonstrated expression and activity in T. denticola of a flavin mononucleotide-based fluorescent protein (FbFP) that is active under anoxic conditions. Addition of routine plasmid-based fluorescence labeling to the Treponema toolset will enable more-rigorous and -detailed studies of the behavior of this organism.

Electroporation-based applications in biotechnology

Electroporation is already an established technique in several areas of medicine, but many of its biotechnological applications have only started to emerge; we review here some of the most promising. We outline electroporation as a phenomenon and then proceed to applications, first outlining the best established - the use of reversible electroporation for heritable genetic modification of microorganisms (electrotransformation), and then explore recent advances in applying electroporation for inactivation of microorganisms, extraction of biomolecules, and fast drying of biomass. Although these applications often aim to upscale to the industrial and/or clinical level, we also outline some important chip-scale applications of electroporation. We conclude our review with a discussion of the main challenges and future perspectives.

Genetic tools for manipulating Acinetobacter baumannii genome: an overview

Acinetobacter baumannii is an emerging nosocomial pathogen involved in a variety of infections ranging from minor soft-tissue infections to more severe infections such as ventilator-associated pneumonia and bacteraemia. A. baumannii has become resistant to most of the commonly used antibiotics and multidrug-resistant isolates are becoming a severe problem in the healthcare setting. In the past few years, whole-genome sequences of >200 A. baumannii isolates have been generated. Several methods and molecular tools have been used for genetic manipulation of various Acinetobacter spp. Here, we review recent developments of various genetic tools used for modification of the A. baumannii genome, including various ways to inactivate gene function, chromosomal integration and transposon mutagenesis.

Improved method for high-efficiency electrotransformation of Escherichia coli with the large BAC plasmids

High transformation competency of Escherichia coli is one of the critical factors in the bacterial artificial chromosome (BAC)-based DNA library construction. Many electroporation protocols have been published until now, but the majority of them was optimized for transformation of small plasmids. Large plasmids with a size above 50 kbp display reduced transformation efficiency and thereby require specific conditions in the preparation and electroporation of electrocompetent cells. In the present work, we have optimized the parameters critical to the application of BAC DNA electrotransformation into E. coli. Systematic evaluation of electroporation variables has revealed several key factors like temperature of growth, media supplements, washing buffer, and cell concentration. Improvements made in the transformation protocol have led to electrocompetent cells with transformation efficiency up to 7 × 10(8) transformants per microgram of 120 kbp BAC plasmid DNA. We have successfully used in-house prepared competent cells, the quality of which is comparable with those produced by different companies, in the construction of metagenomic libraries from the soil. Our protocol can also be beneficial for other application with limited DNA source.

Lightning-triggered electroporation and electrofusion as possible contributors to natural horizontal gene transfer

Phylogenetic studies show that horizontal gene transfer (HGT) is a significant contributor to genetic variability of prokaryotes, and was perhaps even more abundant during the early evolution. Hitherto, research of natural HGT has mainly focused on three mechanisms of DNA transfer: conjugation, natural competence, and viral transduction. This paper discusses the feasibility of a fourth such mechanism--cell electroporation and/or electrofusion triggered by atmospheric electrostatic discharges (lightnings). A description of electroporation as a phenomenon is followed by a review of experimental evidence that electroporation of prokaryotes in aqueous environments can result in release of non-denatured DNA, as well as uptake of DNA from the surroundings and transformation. Similarly, a description of electrofusion is followed by a review of experiments showing that prokaryotes devoid of cell wall can electrofuse into hybrids expressing the genes of their both precursors. Under sufficiently fine-tuned conditions, electroporation and electrofusion are efficient tools for artificial transformation and hybridization, respectively, but the quantitative analysis developed here shows that conditions for electroporation-based DNA release, DNA uptake and transformation, as well as for electrofusion are also present in many natural aqueous environments exposed to lightnings. Electroporation is thus a plausible contributor to natural HGT among prokaryotes, and could have been particularly important during the early evolution, when the other mechanisms might have been scarcer or nonexistent. In modern prokaryotes, natural absence of the cell wall is rare, but it is reasonable to assume that the wall has formed during a certain stage of evolution, and at least prior to this, electrofusion could also have contributed to natural HGT. The concluding section outlines several guidelines for assessment of the feasibility of lightning-triggered HGT.

Homologous Recombination-Experimental Systems, Analysis, and Significance

Homologous recombination is the most complex of all recombination events that shape genomes and produce material for evolution. Homologous recombination events are exchanges between DNA molecules in the lengthy regions of shared identity, catalyzed by a group of dedicated enzymes. There is a variety of experimental systems in Escherichia coli and Salmonella to detect homologous recombination events of several different kinds. Genetic analysis of homologous recombination reveals three separate phases of this process: pre-synapsis (the early phase), synapsis (homologous strand exchange), and post-synapsis (the late phase). In E. coli, there are at least two independent pathway of the early phase and at least two independent pathways of the late phase. All this complexity is incongruent with the originally ascribed role of homologous recombination as accelerator of genome evolution: there is simply not enough duplication and repetition in enterobacterial genomes for homologous recombination to have a detectable evolutionary role and therefore not enough selection to maintain such a complexity. At the same time, the mechanisms of homologous recombination are uniquely suited for repair of complex DNA lesions called chromosomal lesions. In fact, the two major classes of chromosomal lesions are recognized and processed by the two individual pathways at the early phase of homologous recombination. It follows, therefore, that homologous recombination events are occasional reflections of the continual recombinational repair, made possible in cases of natural or artificial genome redundancy.

Plasmid artificial modification: a novel method for efficient DNA transfer into bacteria

Bacterial transformation is an essential component of many molecular biological techniques, but bacterial restriction-modification (R-M) systems can preclude the efficient introduction of shuttle vector plasmids into target bacterial cells. Whole-genome DNA sequences have recently been published for a variety of bacteria. Using homology and motif analyses, putative R-M genes can be identified from genome sequences. Introducing DNA methyltransferase genes into Escherichia coli cells causes subsequently transformed plasmids to be modified by these enzymes. We propose a new method, designated Plasmid Artificial Modification (PAM). A PAM plasmid encoding the modification enzymes expressed by the target bacterial host is transformed into E. coli (PAM host). Propagation of a shuttle vector from the PAM host to the target bacterium ensures that the plasmid will be modified such that it is protected from restriction endonuclease digestion in the target bacterium. The result will be a higher transformation efficiency. Here, we describe the use of PAM and electroporation to transform Bifidobacterium adolescentis ATCC15703. By introducing two genes encoding modification enzymes, we improved transformation efficiency 10(5)-fold.

Recombinant expression of bioactive peptide lunasin in Escherichia coli

Lunasin, a cancer-preventive peptide, was isolated from soybean, barley, and wheat. Previous studies showed that this 43-amino acid peptide has the ability to suppress chemical carcinogen-induced transformation in mammalian cells and skin carcinogenesis in mice. In this study, we attempted to use the Escherichia coli T7 expression system for expression of lunasin. The lunasin gene was synthesized by overlapping extension polymerase chain reaction and expressed in E. coli BL21(DE3) with the use of vector pET29a. The recombinant lunasin containing his-tag at the C-terminus was expressed in soluble form which could be purified by immobilized metal affinity chromatography. After 4 h, the expression level is above 4.73 mg of recombinant his-tagged lunasin/L of Luria-Bertani broth. It does not affect the bacterial growth and expression levels. This is the first study that successfully uses E. coli as a host to produce valuable bioactive lunasin. The result of in vitro bioassay showed that the purified recombinant lunasin can inhibit histone acetylation. Recombinant lunasin also inhibits the release of pro-inflammatory cytokines (tumor necrosis factor-alpha, interleukin-1beta, and nitric oxide production). Compared with other research methods on extraction or chemical synthesis to produce lunasin, our method is very efficient in saving time and cost. In the future, it could be applied in medicine and structure-function determination.

Spontaneous excision of the Salmonella enterica serovar Enteritidis-specific defective prophage-like element phiSE14

Salmonella enterica serovar Enteritidis has emerged as a major health problem worldwide in the last few decades. DNA loci unique to S. Enteritidis can provide markers for detection of this pathogen and may reveal pathogenic mechanisms restricted to this serovar. An in silico comparison of 16 Salmonella genomic sequences revealed the presence of an approximately 12.5-kb genomic island (GEI) specific to the sequenced S. Enteritidis strain NCTC13349. The GEI is inserted at the 5' end of gene ydaO (SEN1377), is flanked by 308-bp imperfect direct repeats (attL and attR), and includes 21 open reading frames (SEN1378 to SEN1398), encoding primarily phage-related proteins. Accordingly, this GEI has been annotated as the defective prophage SE14 in the genome of strain NCTC13349. The genetic structure and location of phiSE14 are conserved in 99 of 103 wild-type strains of S. Enteritidis studied here, including reference strains NCTC13349 and LK5. Notably, an extrachromosomal circular form of phiSE14 was detected in every strain carrying this island. The presence of attP sites in the circular forms detected in NCTC13349 and LK5 was confirmed. In addition, we observed spontaneous loss of a tetRA-tagged version of phiSE14, leaving an empty attB site in the genome of strain NCTC13349. Collectively, these results demonstrate that phiSE14 is an unstable genetic element that undergoes spontaneous excision under standard growth conditions. An internal fragment of phiSE14 designated Sdf I has been used as a serovar-specific genetic marker in PCR-based detection systems and as a tool to determine S. Enteritidis levels in experimental infections. The instability of this region may require a reassessment of its suitability for such applications.

Helicobacter pylori HopE and HopV porins present scarce expression among clinical isolates

AIM

To evaluate how widely Helicobacter pylori (H. pylori) HopE and HopV porins are expressed among Chilean isolates and how seroprevalent they are among infected patients in Chile.

METHODS

H. pylori hopE and hopV genes derived from strain CHCTX-1 were cloned by polymerase chain reaction (PCR), sequenced and expressed in Escherichia coli AD494 (DE3). Gel-purified porins were used to prepare polyclonal antibodies. The presence of both genes was tested by PCR in a collection of H. pylori clinical isolates and their expression was detected in lysates by immunoblotting. Immune responses against HopE, HopV and other H. pylori antigens in sera from infected and non-infected patients were tested by Western blotting using these sera as first antibody on recombinant H. pylori antigens.

RESULTS

PCR and Western blotting assays revealed that 60 and 82 out of 130 Chilean isolates carried hopE and hopV genes, respectively, but only 16 and 9, respectively, expressed these porins. IgG serum immunoreactivity evaluation of 69 H. pylori-infected patients revealed that HopE and HopV were infrequently recognized (8.7% and 10.1% respectively) compared to H. pylori VacA (68.1%) and CagA (59.5%) antigens. Similar values were detected for IgA serum immunoreactivity against HopE (11.6%) and HopV (10.5%) although lower values for VacA (42%) and CagA (17.4%) were obtained when compared to the IgG response.

CONCLUSION

A scarce expression of HopE and HopV among Chilean isolates was found, in agreement with the infrequent seroconversion against these antigens when tested in infected Chilean patients.

Construction of stably maintained non-mobilizable derivatives of RSF1010 lacking all known elements essential for mobilization

Background

RSF1010 is a well-studied broad-host-range plasmid able to be mobilized to different bacteria and plants. RSF1010-derived plasmid vectors are widely used in both basic research and industrial applications. In the latter case, exploiting of mobilizable plasmids or even the plasmids possessing negligible mobilization frequency, but containing DNA fragments that could promote conjugal transfer, is undesirable because of biosafety considerations. Previously, several mutations significantly decreasing efficiency of RSF1010 mobilization have been selected. Nevertheless, construction of the RSF1010 derivative lacking all known loci involved in the conjugal transfer has not been reported yet.

Results

Novel non-mobilizable derivatives of RSF1010 lacking all known DNA sequences involved in the mobilization process have been obtained due to the exploiting of λRed-driven recombination between the plasmid and a constructed in vitro linear DNA fragment. To provide auto-regulated transcription of the essential replication gene, repB, the plasmid loci oriT, mobC and mobA were substituted by the DNA fragment containing P_lacUV5→lacI. Mobilization of the obtained RSFmob plasmid was not detected in standard tests. The derivative of RSFmob with increased copy number has been obtained after lacI elimination. High stability of both constructed plasmids has been demonstrated in Escherichia coli and Pantoea ananatis. Design of RSFmob allows easy substitution of P_lacUV5 by any desirable promoter for construction of novel derivatives with changed copy number or host range.

Conclusion

Novel non-mobilizable derivatives of RSF1010 lacking all known DNA sequences involved in the mobilization process and stably maintained at least in E. coli and P. ananatis have been constructed. The obtained plasmids became the progenitors of new cloning vectors answering all biosafety requirements of genetically modified organisms used in scale-up production.

Efficient transformation of Lactococcus lactis IL1403 and generation of knock-out mutants by homologous recombination

Lactococcus lactis IL1403 is a Gram-positive bacterium of great biotechnological interest for food grade applications. Its use is however hampered by the difficulty to efficiently transform this strain. We here describe a detailed, optimized electrotransformation protocol which yields a transformation efficiency of 10(6) cfu/microg of DNA with the two E. coli Gram-positive shuttle vectors pC3 and pVA838. The utility of the protocol was demonstrated by the generation of single- and double-knock-out mutants by homologous recombination.

Tapping diversity lost in transformations--in vitro amplification of ligation reactions

Molecular evolution is a powerful means of engineering proteins. It usually requires the generation of a large recombinant DNA library of variants for cloning into a phage or plasmid vector, and the transformation of a host organism for expression and screening of the variant proteins. However, library size is often limited by the low yields of circular DNA and the poor transformation efficiencies of linear DNA. Here we have overcome this limitation by amplification of recombinant circular DNA molecules directly from ligation reactions. The amplification by bacteriophage Phi29 polymerase increased the number of transformants; thus from a nanogram-scale ligation of DNA fragments comprising two sub-libraries of variant antibody domains, we succeeded in amplifying a highly diverse and large combinatorial phage antibody library (>10(9) transformants in Escherichia coli and 10(5)-fold more transformants than without amplification). From the amplified library, but not from the smaller un-amplified library, we could isolate several antibody fragments against a target antigen. It appears that amplification of ligations with Phi29 polymerase can help recover clones and molecular diversity otherwise lost in the transformation step. A further feature of the method is the option of using PCR-amplified vectors for ligations.

The AGUAAA motif in cspA1/A2 mRNA is important for adaptation of Yersinia enterocolitica to grow at low temperature

Acclimatization of the psychrotolerant Yersinia enterocolitica after a cold shock from 30 degrees C to 10 degrees C causes transcription of the major cold shock protein (CSP) bicistronic gene cspA1/A2 to increase by up to 300-fold. Northern blot analysis of cspA1/A2 using four probes that hybridize specifically to different regions of CSP mRNA revealed the appearance of a number of cspA1/A2 transcripts that are smaller than the original transcript and transiently visible at the end of the acclimation period. Primer extension and RNA protection experiments demonstrated that these smaller mRNAs have 5' ends located in the same core sequence (5'-AGUAAA-3') at five different places within the mRNA, indicating preferential cleavage of the CSP mRNA transcripts. A similar result was obtained for cspB of Escherichia coli, containing two such core sequences. Furthermore, this motif is present in the major CSP genes of a variety of Gram-negative and Gram-positive bacteria. We have therefore termed this sequence cold shock cut box (CSC-box). After inserting a CSC-box into a plasmid-bound lacZ gene in Y. enterocolitica, the mRNA of this construct was cleaved within the CSC-box, and a change in this CSC-box from AGUAAA to AGUCCC dramatically reduced cleavage of the mutated lacZ gene. Mutating all CSC-boxes in Y. enterocolitica of a plasmid bound cspA1/A2 dramatically increases the lag time after a cold shock before re-growth occurs. Based on these results, we suggest that the role of the CSC-box is related to downregulation of cspA mRNA after acclimation to low temperature.

Multiple origins and replication proteins influence biological properties of beta-lactamase-producing plasmids from Neisseria gonorrhoeae

The beta-lactamase-producing Asia-type plasmid pJD4 of Neisseria gonorrhoeae is a 7.4-kb, broad-host-range plasmid. It is part of a family of plasmids which are structurally related yet vary in size, found in both N. gonorrhoeae and Haemophilus ducreyi. Branch-point analysis by electron microscopy indicates that pJD4 carries three clustered but distinguishable origins of replication, which we named ori1, ori2, and ori3. Although pJD4 belongs to incompatibility (Inc) group W, it also carries a silent IncFII determinant which is expressed when ori2 and ori3 are absent. The Africa-type plasmid pJD5, a naturally occurring deletion derivative of pJD4, carries only ori1, belongs to the IncFII group, and, in contrast to pJD4, requires DNA polymerase I (Pol I) for replication. Plasmids constructed from pJD4 which lack ori1 but carry ori2 and ori3 do not require Pol I and are incompatible with IncW plasmids, suggesting that the ori2 or ori3 region contains the IncW determinant. We have cloned a replication initiation protein (RepB) that is necessary for ori2 and ori3 to function. This Rep protein is distinct from RepA, which is necessary for ori1. Thus, pJD4 is unique because it is the smallest plasmid characterized containing three origins of replication and two unique Rep proteins.

A coelectroporation method for the isolation of cryptic plasmids from Lactococcus lactis

AIMS

A coelectroporation method using a marker plasmid for indirect selection of lactococcal plasmids with unassigned functions was evaluated.

METHODS AND RESULTS

Cryptic plasmids were mixed with an erythromycin resistance (Eryr) marker plasmid and introduced into a recipient strain by electroporation, followed by plasmid extraction of erythromycin-resistant transformants. By optimizing the ratio between the marker plasmid and the cryptic plasmids, an average of 20% cotransformants was obtained, including combinations of more than one cryptic plasmid. The marker plasmid pSA3 was easily eliminated from the cotransformed cells by subculture without selective pressure.

CONCLUSION

This cotransformation approach reduces the number of colonies that must be screened to find transformants harbouring cryptic plasmids.

SIGNIFICANCE AND IMPACT OF THE STUDY

The method facilitates the isolation of cryptic plasmids, helps in assigning functions to unknown plasmids and allows construction of food-grade lactococcal strains with new combinations of wild-type plasmids.

Subset of hybrid eukaryotic proteins is exported by the type I secretion system of Erwinia chrysanthemi

Erwinia chrysanthemi exports degradative enzymes by using a type I protein secretion system. The proteases secreted by this system lack an N-terminal signal peptide but contain a C-terminal secretion signal. To explore the substrate specificity of this system, we have expressed the E. chrysanthemi transporter system (prtDEF genes) in Escherichia coli and tested the ability of this ABC transporter to export hybrid proteins carrying C-terminal fragments of E. chrysanthemi protease B. The C terminus contains six glycine-rich repeated motifs, followed by two repeats of the sequences DFLV and DIIV. Two types of hybrid proteins were assayed for transport, proteins with the 93-residue-protease-B C terminus containing one glycine-rich repeat and both hydrophobic terminal repeats and proteins with the 181-residue C terminus containing all repeat motifs. Although the shorter C terminus is unable to export the hybrids, the longer C terminus can promote the secretion of hybrid proteins with N termini as large as 424 amino acids, showing that the glycine-rich motifs are required for the efficient secretion of these hybrids. However, the secretion of hybrids occurs only if these proteins do not carry disulfide bonds in their mature structures. These latter results suggest that disulfide bond formation can occur prior to or during the secretion. Disulfide bonds may prevent type I secretion of hybrids. One simple hypothesis to explain these results is that the type I channel is too narrow to permit the export of proteins with secondary structures stabilized by disulfide bonds.

The influence of the growth phase of enteric bacteria on electrotransformation with plasmid DNA

Salmonella typhimurium LB5000 and Escherichia coli JM109 were transformed by electroporation. In accordance with the chemical transformation methods, the growth phase of these electrocompetent bacteria had a strong impact on transformation efficiency. Survival of bacteria after the high-voltage electrical pulse was also influenced by the growth phase. Both bacterial species were most successfully electrotransformed when microbial cells were harvested at the late lag phase. The second optimum for transformation reached E. coli cells in the mid-exponential and S. typhimurium cells in the late exponential phase. Transformation efficiencies ranged from 3.4 x 10(4) to 2.7 x 10(5) transformants per microgram DNA in the case of S. typhimurium and from 2.8 x 10(2) to 8.8 x 10(5) transformants per microgram DNA in the case of E. coli. Survival of cells after the electrical pulse in late lag and late exponential phases was about 20% higher than during other phases of growth. Preparing electrocompetent cells from later phases of their growth is more useful for practice, because it provides more biomass with good yield of transformants.

The SLENDER gene of pea encodes a gibberellin 2-oxidase

The amount of active gibberellin (GA) in plant tissues is determined in part by its rate of catabolism through oxidation at C-2. In pea (Pisum sativum L.) seeds, GA 2-oxidation is controlled by the SLN (SLENDER) gene, a mutation of which produces seedlings characterized by a slender or hyper-elongated phenotype. We cloned a GA 2-oxidase cDNA from immature pea seeds by screening an expression library for enzyme activity. The clone contained a full-length open reading frame encoding a protein of 327 amino acids. Lysate of bacterial cultures expressing the protein converted the C(19)-GAs, GA(1), GA(4), GA(9), and GA(20) to the corresponding 2beta-hydroxy products. GA(9) and GA(20) were also converted to GA(51) and GA(29) catabolites, respectively. The gene appeared to be one member of a small family of GA 2-oxidases in pea. Transcript was found predominantly in roots, flowers, young fruits, and testae of seeds. The corresponding transcript from sln pea contained a point mutation and did not produce active enzyme when expressed heterologously. RFLP analysis of a seedling population segregating for SLN and sln alleles showed the homozygous mutant allele co-segregating with the characteristic slender phenotype. We conclude that SLN encodes GA 2-oxidase.

Semi-quantitative characterization of electroporation-assisted disinfection processes for inactivation of Giardia and Cryptosporidium

The effect of electroporation (very short duration pulses of high voltage electricity) on the viability of Giardia cysts and Cryptosporidium oocysts, and on the viability of these organisms in the presence of free chlorine, combined chlorine, hydrogen peroxide and potassium permanganate, was examined. While electroporation itself had only a minor effect on survival, the combination of electrical and chemical treatment produced superior inactivation, particularly with combined chlorine, hydrogen peroxide and potassium permanganate. This enhancement may provide a relatively practical way of achieving enhanced inactivation of resistant protozoa by water disinfection processes. Further study of kinetics and optimum treatment combinations is needed.

The hrpA and hrpC operons of Erwinia amylovora encode components of a type III pathway that secretes harpin

A 6.2-kb region of DNA corresponding to complementation groups II and III of the Erwinia amylovora hrp gene cluster was analyzed. Transposon mutagenesis indicated that the two complementation groups are required for secretion of harpin, an elicitor of the hypersensitive reaction. The sequence of the region revealed 10 open reading frames in two putative transcription units: hrpA, hrpB, hrcJ, hrpD, and hrpE in the hrpA operon (group III) and hrpF, hrpG, hrcC, hrpT, and hrpV in the hrpC operon (group II). From promoter regions of the hrpA, hrpC, and hrpN operons, sequences similar to those of the HrpL-dependent promoters of Pseudomonas syringae pathovars were identified with a consensus sequence of 5'-GGAAC-N17-18-CACTNAA-3'. The protein products of seven genes, hrpA, hrcJ, hrpE, hrpF, hrpG, hrcC, and hrpV, were visualized with a T7 polymerase/promoter expression system. HrcC, HrcJ, and HrpT sequences contained potential signal peptides, and HrcC appeared to be envelope associated based on a TnphoA translational fusion. Comparison of deduced amino acid sequences indicated that many of the proteins are homologous to proteins that function in the type III protein secretion pathway. HrcC is a member of the YscC-containing subgroup in the PulD/pIV superfamily of outer membrane proteins. HrcJ is a member of a lipoprotein family that includes YscJ of Yersinia spp., MxiJ of Shigella flexneri, and NolT of Rhizobim fredii. Additional similarities were detected between HrpB and YscI and between HrpE and YscL. HrcJ and HrpE were similar to flagellar biogenesis proteins FliF and FliH, respectively. In addition, HrpA, HrpB, HrcJ, HrpD, HrpE, HrpF, and HrcC showed various degrees of similarity to corresponding proteins of P. syringae. Comparison of hrp clusters with respect to gene organization and similarity of individual proteins confirms that the hrp systems of E. amylovora and P. syringae are closely related to each other and distinct from those of Ralstonia (Pseudomonas) solanacearum and Xanthomonas campestris. Possible implications of extensive similarities between the E. amylovora and P. syringae hrp systems in pathogenesis mechanisms are discussed.

Development of a gene transfer system in Treponema denticola by electroporation

Treponema denticola is strongly implicated in the etiology of periodontal diseases. However, genetic transformation of this organism has not been reported. We now demonstrate a gene transfer system in T. denticola by electroporation using a broad host plasmid pKT210 as a shuttle vector. Plasmid extraction, Southern blot hybridization as well as the polymerase chain reaction indicated the presence of the plasmid in T. denticola transformants. The restriction patterns of plasmid pKT210 rescued from the T. denticola transformants in Escherichea coli suggested that some of the rescued plasmids were identical to the original pKT210, but some of them had been modified. This transformation system could be a potentially useful tool for genetic manipulation of oral spirochetes.