Analysis of the vegetative replication origin of broad-host-range plasmid RK2 by transposon mutagenesis

Plant development inhibitory genes in binary vector backbone improve quality event efficiency in soybean transformation

Conventional Agrobacterium-mediated plant transformation often produces a significant frequency of transgenic events containing vector backbone sequence, which is generally undesirable for biotechnology applications. We tested methods to reduce the frequency of transgenic plants containing vector backbone by incorporating genes into the backbone that inhibit the development of transgenic plants. Four backbone frequency reduction genes, bacterial levansucrase (sacB), maize cytokinin oxidase (CKX), Phaseolus GA 2-oxidase (GA 2-ox), and bacterial phytoene synthase (crtB), each expressed by the enhanced CaMV 35S promoter, were placed individually in a binary vector backbone near the left border (LB) of binary vectors. In transformed soybean plants, the lowest frequency of backbone presence was observed when the constitutively expressed CKX gene was used, followed by crtB. Higher backbone frequencies were found among the plants transformed with the GA 2-oxidase and sacB vectors. In some events, transfer of short backbone fragments appeared to be caused by LB readthrough and termination within the backbone reduction gene. To determine the effect of the backbone genes on transformation frequency, the crtB and CKX vectors were then compared to a control vector in soybean transformation experiments. The results revealed that there was no significant transformation frequency difference between the crtB and control vectors, but the CKX vector showed a significant transformation frequency decrease. Molecular analysis revealed that the frequency of transgenic plants containing one or two copies of the transgene and free of backbone was significantly increased by both the CKX and crtB backbone reduction vectors, indicating that there may be a correlation between transgene copy number and backbone frequency.

Plasmids from freshwater environments capable of IncQ retrotransfer are diverse and include pQKH54, a new IncP-1 subgroup archetype

Nine mercury-resistance plasmids isolated from river epilithon were assessed for their ability to retrotransfer the non-conjugative IncQ plasmid, R300B, derivatives of which have commercial uses that may result in accidental or deliberate release into the environment. Retrotransfer frequencies ranging from 2.1 x 10(-4) to 1.75 x 10(-5) were obtained for five of the nine plasmids--the remaining plasmids showed low or undetectable retrotransfer ability. The majority of the retrotransfer-proficient plasmids could not be classified by the tests used. Classical incompatibility testing with RP4 identified pQKH6, pQKH54 and pQM719 as IncP-1. Hybridization to replicon probes confirmed this for pQKH6 and pQM719 and added pQKH33. PCR with primers designed to amplify trfA and korA regions of IncP-1 plasmids did not identify any other plasmids. Plasmids pQKH6 and pQM719 but not pQKH54 produced similar SphI restriction profiles to the IncP-1beta subgroup. The complete nucleotide sequence of pQKH54 was determined, revealing it to have a complete IncP-1 backbone but belonging to a new distinct subgroup which was designated IncP-1gamma. The results emphasize the ubiquity and diversity of IncP-1 plasmids in the environment but demonstrate that plasmids of as yet unknown groups are also able to retrotransfer IncQ plasmids efficiently.

DnaA box sequences as the site for helicase delivery during plasmid RK2 replication initiation in Escherichia coli

DnaA box sequences are a common motif present within the replication origin region of a diverse group of bacteria and prokaryotic extrachromosomal genetic elements. Although the origin opening caused by binding of the host DnaA protein has been shown to be critical for the loading of the DnaB helicase, to date there has been no direct evidence presented for the formation of the DnaB complex at the DnaA box site. For these studies, we used the replication origin of plasmid RK2 (oriV), containing a cluster of four DnaA boxes that bind DnaA proteins isolated from different bacterial species (Caspi, R., Helinski, D. R., Pacek, M., and Konieczny, I. (2000) J. Biol. Chem. 275, 18454-18461). Size exclusion chromatography, surface plasmon resonance, and electron microscopy experiments demonstrated that the DnaB helicase is delivered to the DnaA box region, which is localized approximately 200 base pairs upstream from the region of origin opening and a potential site for helicase entry. The DnaABC complex was formed on both double-stranded superhelical and linear RK2 templates. A strict DnaA box sequence requirement for stable formation of that nucleoprotein structure was confirmed. In addition, our experiments provide evidence for interaction between the plasmid initiation protein TrfA and the DnaABC prepriming complex, formed at DnaA box region. This interaction is facilitated via direct contact between TrfA and DnaB proteins.

Host-dependent requirement for specific DnaA boxes for plasmid RK2 replication

The replication origin of the broad-host-range plasmid RK2, oriV, contains four DnaA boxes, which bind the DnaA protein isolated from Escherichia coli. Using a transformation assay, mutational analysis of these boxes showed a differential requirement for replication in different Gram-negative bacteria. DnaA boxes 3 and 4 were required in E. coli and Pseudomonas putidabut not as strictly in Azotobacter vinelandii and not at all in P. aeruginosa. In vitro replication results using an extract prepared from E. coli demonstrated that the activity of origin derivatives containing mutations in boxes 3 or 4 or a deletion of all four DnaA boxes could be restored by the addition of increasing amounts of purified DnaA protein. High levels of DnaA protein in the presence of the TrfA protein also resulted in the stimulation of open complex formation and DnaB helicase loading on oriV, even in the absence of the four DnaA boxes. These observations at least raise the possibility that an alternative mechanism of initiation of oriV is being used in the absence of the four DnaA boxes and that this mechanism may be similar to that used in P. aeruginosa, which does not require these four DnaA boxes for replication.

A critical DnaA box directs the cooperative binding of the Escherichia coli DnaA protein to the plasmid RK2 replication origin

The requirement of DnaA protein binding for plasmid RK2 replication initiation the Escherichia coli was investigated by constructing mutations in the plasmid replication origin that scrambled or deleted each of the four upstream DnaA boxes. Altered origins were analyzed for replication activity in vivo and in vitro and for binding to the E. coli DnaA protein using a gel mobility shift assay and DNase I footprinting. Most strikingly, a mutation in one of the boxes, box 4, abolished replication activity and eliminated stable DnaA protein binding to all four boxes. Unlike DnaA binding to the E. coli origin, oriC, DnaA binding to two of the boxes (boxes 4 and 3) in the RK2 origin, oriV, is cooperative with box 4 acting as the "organizer" for the formation of the DnaA-oriV nucleoprotein complex. Interestingly, the inversion of box 4 also abolished replication activity, but did not result in a loss of binding to the other boxes. However, DnaA binding to this mutant origin was no longer cooperative. These results demonstrate that the sequence, position, and orientation of box 4 are crucial for cooperative DnaA binding and the formation of a nucleoprotein structure that is functional for the initiation of replication.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

Replication origin of the broad host range plasmid RK2. Positioning of various motifs is critical for initiation of replication

The 393-base pair minimal origin, oriV, of plasmid RK2 contains three iterated motifs essential for initiation of replication: consensus sequences for binding the bacterial DnaA protein, DnaA boxes, which have recently been shown to bind the DnaA protein; 17-base pair direct repeats, iterons, which bind the plasmid encoded replication protein, TrfA; and A + T-rich repeated sequences, 13-mers, which serve as the initial site of helix destabilization. To investigate how the organization of the RK2 origin contributes to the mechanism of replication initiation, mutations were introduced into the minimal origin which altered the sequence and/or spacing of each particular region relative to the rest of the origin. These altered origins were analyzed for replication activity in vivo and in vitro, for localized strand opening and for DnaB helicase mediated unwinding. Mutations in the region between the iterons and the 13-mers which altered the helical phase or the intrinsic DNA curvature prevented strand opening of the origin and consequently abolished replication activity. Insertions of more or less than one helical turn between the DnaA boxes and the iterons also inactivated the replication origin. In these mutants, however, strand opening appeared normal but the levels of DnaB helicase activity were substantially reduced. These results demonstrate that correct helical phasing and intrinsic DNA curvature are critical for the formation of an open complex and that the DnaA boxes must be on the correct side of the helix to load DnaB helicase.

The korF region of broad-host-range plasmid RK2 encodes two polypeptides with transcriptional repressor activity

Broad-host-range IncP plasmid RK2 possesses a series of operons involved in plasmid maintenance, whose expression is coordinated by a number of regulators, most of which are encoded in the central regulatory korA-korB operon. The nucleotide sequence of two new cistrons in this operon, comprising what we have previously designated the korF locus located between coordinates 57.0 and 56.0 kb on the genome of the IncP alpha plasmid RK2, is presented. The cistrons encode polypeptides of 173 and 175 amino acids. Each can repress transcription from the promoters for the kfrA (a monocistronic operon which follows the korA-korB operon) and trfA (a polycistronic operon encoding a putative single-stranded-DNA-binding protein as well as the essential plasmid replication protein TrfA) operons. In addition, the korF loci allow korB to repress kfrA transcription. Both polypeptides contain hydrophobic segments, suggesting that they may be membrane associated. KorFI is highly basic protein whose predicted properties are similar to those of histone like proteins.

Comparative genetic organization of incompatibility group P degradative plasmids

Plasmids that encode genes for the degradation of recalcitrant compounds are often examined only for characteristics of the degradative pathways and ignore regions that are necessary for plasmid replication, incompatibility, and conjugation. If these characteristics were known, then the mobility of the catabolic genes between species could be predicted and different catabolic pathways might be combined to alter substrate range. Two catabolic plasmids, pSS50 and pSS60, isolated from chlorobiphenyl-degrading strains and a 3-chlorobenzoate-degrading plasmid, pBR60, were compared with the previously described IncP group (Pseudomonas group P-1) plasmids pJP4 and R751. All three of the former plasmids were also members of the IncP group, although pBR60 is apparently more distantly related. DNA probes specific for known genetic loci were used to determine the order of homologous loci on the plasmids. In all of these plasmids the order is invariant, demonstrating the conservation of this "backbone" region. In addition, all five plasmids display at least some homology with the mercury resistance transposon, Tn501, which has been suggested to be characteristic of the beta subgroup of the IncP plasmids. Plasmids pSS50 and pSS60 have been mapped in detail, and repeat sequences that surround the suspected degradation genes are described.

Broad-host-range gyrase A gene probe

The Escherichia coli gyrase A gene was cloned in the broad-host-range cosmid vector pLA2917. The resulting plasmid, pNJR3-2, conferred quinolone susceptibility on a gyrA mutant of E. coli. To analyze the expression of this E. coli gene in Pseudomonas aeruginosa, pNJR3-2 or pLA2917 was mobilized via conjugation into P. aeruginosa PAO2 and several well-characterized quinolone-resistant mutants of this strain. The vector pLA2917 did not significantly affect the quinolone susceptibilities of any of the P. aeruginosa strains. However, pNJR3-2 conferred wild-type quinolone susceptibility on P. aeruginosa cfxA (gyrA) mutants and intermediate quinolone susceptibility on cfxA-cfxB double mutants of P. aeruginosa. The quinolone susceptibility of P. aeruginosa PAO2 gyrA+ was unaffected by pNJR3-2. Also, pNJR3-2 had no significant effect on P. aeruginosa cfxB (permeability) mutants. These results demonstrate that the DNA gyrase A gene from E. coli is expressed in P. aeruginosa and confers dominant susceptibility on gyrA mutants. Thus, pNJR3-2 can be used to detect the quinolone resistance mutations that occur in the gyrase A gene of this organism. pNJR3-2 also appears to discriminate between mutations in gyrA and mutations which alter permeability. This gyrase A probe was used successfully in the analysis of quinolone resistance in clinical isolates of P. aeruginosa.

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

The complete nucleotide sequence of a small cryptic plasmid from Lactobacillus plantarum

The complete nucleotide sequence of a cryptic plasmid isolated from a Lactobacillus plantarum strain has been determined. The plasmid, designated pC30i1, has a molecular size of 2140 bp and a GC content of 37%. The sequence contains one major open reading frame (ORF R) of 951 bp, encoding a basic polypeptide of 317 amino acids, and a molecular weight of 36,956. ORF R shows extensive sequence similarity with genes coding for replication-associated proteins in a group of gram-positive plasmids known to replicate via single-stranded intermediates (ssDNA plasmids), and a stretch of 9 amino acids in the translation of ORF R closely matches a conserved region in these proteins, as well as the active site of the phi X174 Rep protein. Sequences similar to the ssDNA plasmid origins of replication are also present in the pC30i1 sequence, strengthening the hypothesis that pC30i1 belongs to the ssDNA plasmid family. The other main feature of the pC30i1 sequence is a noncoding region consisting of 14 direct, imperfect repeats of a 17-bp sequence, which may have an incompatibility function.

Replication of mini RK2 plasmid in extracts of Escherichia coli requires plasmid-encoded protein TrfA and host-encoded proteins DnaA, B, G DNA gyrase and DNA polymerase III

Soluble extracts of Escherichia coli capable of carrying out replication of the mini-RK2 derivative pCT461 have been prepared from cells carrying this plasmid or from plasmid-free bacteria. The latter are dependent upon exogenously added plasmid-encoded replication protein (TrfA) and require additional DnaA protein for optimum activity. This dependence upon DnaA was confirmed by the failure of DnaA-deficient cell extracts to support replication of pCT461 in the absence of added DnaA protein. Replication is unidirectional and begins at or near oriV, the vegetative replication origin of RK2. DNase I protection studies with purified TrfA indicate that this protein acts by binding to short (17 base-pairs) directly repeated DNA sequences present in oriV. The in vitro replication is resistant to rifampicin but can be abolished by antibodies against DnaG protein (E. coli primase) or DnaB protein (helicase) and by DNA gyrase inhibitors. Inhibition by arabinosyl-CTP suggests that DNA polymerase III is responsible for elongation of nascent DNA strands. These results are discussed in relation to the mechanism of RK2 replication and in the context of the host range of the plasmid.

Molecular genetic analysis of bacterial plasmid promiscuity

The molecular genetic basis of the promiscuity of the wide host range conjugative IncP-1 alpha plasmids has been investigated by transposon mutagenesis and by the construction of minireplicons. The former has identified the origin of plasmid vegetative replication, the replication genes needed for initiation of plasmid replication, the DNA primase gene and a gene encoding a polypeptide of 52 kDa and mapping near the origin of plasmid transfer as all contributing to promiscuity. Minireplicon constructions confirm this conclusion but in addition establish that the origins of replication, transfer and other genomic regions produce complex interactions with respect to host range. DNA sequence analysis within the origin of replication show that the first direct repeat of the cluster of five repeats and sequences immediately 5' to it appear to be required in some (Escherichia coli) but not in other (Pseudomonas aeruginosa) hosts for plasmid replication.

Identification and classification of bacterial plasmids

Images

DnaA protein is required for replication of the minimal replicon of the broad-host-range plasmid RK2 in Escherichia coli

The minimal origin of replication of the broad-host-range plasmid RK2 has two potential recognition sequences for the DnaA protein of Escherichia coli. DNA transfer by transformation into a dnaA-null mutant of E. coli showed that DnaA protein is needed for replication or maintenance of mini-RK2. We isolated and purified DnaA protein as a chimeric protein, covalently attached to a piece of collagen and beta-galactosidase. The hybrid protein specifically bound to restriction fragments from the oriV region of RK2, which contained the two dnaA boxes. Deletion of the second dnaA box inactivated the origin and abolished the binding of the hybrid protein to the DNA fragment that had suffered the deletion. When the second dnaA box was replaced with an EcoRI linker of identical length, origin activity was restored. Binding experiments showed that the linker provided a weak dnaA box. An alternative explanation was that the linker restored proper spacing between sequences on either side of the deleted box, thus restoring origin activity.

DNA sequence analysis of host range mutants of the promiscuous IncP-1 plasmids R18 and R68 with Tn7 insertions in oriV

Transposon Tn7 insertions in the origin of vegetative replication (oriV) result in host range mutants of the promiscuous IncP-1 plasmids R18 and R68 which affect plasmid replication in Escherichia coli but not in Pseudomonas aeruginosa. The sites of these insertions have been analyzed by DNA sequence analysis. In two mutants, the insertions generated direct duplications of 5'GTATT3' at the target site which included the first base at the 5' end of the fourth 17-bp direct repeat in oriV. In a third mutant the duplication of 5'GACAC3' also involved the same direct repeat also at the 5' end but contiguous with the previous duplication. DNA sequence analysis of another Tn7-induced host range mutant of R18, characterized by reduced conjugational transmissibility into P. stutzeri while retaining normal transmissibility within P. aeruginosa, showed that the insertion generated a 474-bp deletion which brought the insertion 20 bp 5' to the 17-bp direct repeat between oriV and the oxytetracycline hydrochloride-resistant gene. The analysis of the DNA sequence data at the site of the Tn7 insertions shows that particular segments of the DNA sequence in oriV are differentially required for the replication of these plasmids in different bacterial hosts and thus of importance to the promiscuity of these plasmids.

Comparison of the organisation of the genomes of phenotypically diverse plasmids of incompatibility group P: members of the IncP beta sub-group are closely related

Comparison of physical maps of the broad host range plasmids R751, R906 and R772, belonging to the IncP beta sub-group of the Escherichia coli incompatibility group P, reveals two large regions of similarity, separated by dissimilar regions which contain the majority of the cleavage sites for restriction endonucleases with hexanucleotide recognition sites. Mapping of the regions of these plasmids which show homology to probes specific for genetically characterised segments of the distantly related IncP alpha plasmid RK2, involved in plasmid maintenance or conjugal transfer, reveals that all four plasmids share a similar genetic organisation. In each case the homologous plasmid backbone is interrupted by heterologous segments both between the essential replication loci oriV and trfA, and between the conjugal transfer regions tra1 and tra2, although in the case of R772 the segment of the backbone carrying the trfA and tra2 regions is inverted relative to that of the other plasmids. However, in the case of pJP4, shown to be a fourth member of the IncP beta sub-group, the backbone is interrupted only by a single large segment adjacent to the trfA region. Mapping of the regions of the four IncP beta plasmids which show homology to Tn501 and nucleotide sequence determination at the ends of the homologous regions reveals that R906, R772 and pJP4 share a common mercury resistance region. This region, which appears to have been inactivated in R772, was probably inserted into a common ancestor of these plasmids by the transposition of an element related to an ancestor of Tn501. R751 shows no trace of the mercury resistance region, but contains a short relict of Tn501, derived from an independent insertion event.