Structural analysis of Tc1 elements in Caenorhabditis elegans var. Bristol (strain N2)

Population frequencies of transposable elements in selfing and outcrossing Caenorhabditis nematodes

Population genetics theory predicts that differences in breeding systems should be an important factor in the dynamics of selfish genetic elements, because of different intensities of selection on both hosts and elements. We examined population frequencies of transposable elements (TEs) in natural populations of the self-fertilizing nematode Caenorhabditis elegans and its outcrossing relative Caenorhabditis remanei. We identified a Tc1-like class of elements in the C. remanei genome with homology to the terminal inverted repeats of the C. elegans Tc1 transposon, which we name mTcre1. We measured levels of insertion polymorphism for all 32 Tc1 elements present in the genome sequence of the C. elegans N2 strain, and 16 mTcre1 elements from the genome sequence of the C. remanei PB4641 strain. We show that transposons are less polymorphic and segregate at higher frequencies in C. elegans compared with C. remanei. Estimates of the intensity of selection based on the population frequencies of polymorphic elements suggest that transposons are selectively neutral in C. elegans, but subject to purifying selection in C. remanei. These results are consistent with a reduced efficacy of natural selection against TEs in selfing populations, but may in part be explained by non-equilibrium TE dynamics.

Characterisation of a polymorphic Tc1-like transposable element of the parasitic nematode Haemonchus contortus

Hctc1, a member of the Tc1-family of transposable elements was isolated from the parasitic nematode Haemonchus contortus. Hctc1 is 1590 bp long, is flanked by 55 bp inverted repeats and carries a single open reading frame of a 340 amino acid transposase-like protein. Hctc1 is similar to Tc1 of Caenorhabditis elegans and elements Tcb1 and Tcb2 of Caenorhabditis briggsae in the inverted terminal repeats, the open reading frame, as well as the target insertion sequence. Furthermore, the copy number of Hctc1 is comparable with the Tc1 copy number in low copy strains of C. elegans. The sequence of Hctc1 is highly variable in H. contortus due to deletions, insertions and point mutations, with at least five distinct length variants of Hctc1. Most of the Hctc1 variation was within rather than between H. contortus populations. The high level of sequence variation is probably due to variation generally found for members of the Tc1-family, as well as a high background level of genetic variation of H. contortus.

Abortive gap repair: underlying mechanism for Ds element formation

The mechanism by which the maize autonomous Ac transposable element gives rise to nonautonomous Ds elements is largely unknown. Sequence analysis of native maize Ds elements indicates a complex chimeric structure formed through deletions of Ac sequences with or without insertions of Ac-unrelated sequence blocks. These blocks are often flanked by short stretches of reshuffled and duplicated Ac sequences. To better understand the mechanism leading to Ds formation, we designed an assay for detecting alterations in Ac using transgenic tobacco plants carrying a single copy of Ac. We found frequent de novo alterations in Ac which were excision rather than sequence dependent, occurring within Ac but not within an almost identical Ds element and not within a stable transposase-producing gene. The de novo DNA rearrangements consisted of internal deletions with breakpoints usually occurring at short repeats and, in some cases, of duplication of Ac sequences or insertion of Ac-unrelated fragments. The ancient maize Ds elements and the young Ds elements in transgenic tobacco showed similar rearrangements, suggesting that Ac-Ds elements evolve rapidly, more so than stable genes, through deletions, duplications, and reshuffling of their own sequences and through capturing of unrelated sequences. The data presented here suggest that abortive Ac-induced gap repair, through the synthesis-dependent strand-annealing pathway, is the underlying mechanism for Ds element formation.

Strain evolution in Caenorhabditis elegans: transposable elements as markers of interstrain evolutionary history

Evolutionary relationships across taxa can be deduced from sequence divergence of proteins, RNA, or DNA; sequences which diverge rapidly, such as those of mitochondrial genes, have been especially useful for comparisons of closely related species, and--within limits--of strains within a species. We have utilized the transposable element Tc1 as a polymorphic marker to evaluate the evolutionary relationships among nine Caenorhabditis elegans strains. For five low-Tc1-copy strains, we compared patterns of restriction fragments hybridizing to a cloned Tc1 probe. Twenty of the 40 Tc1 insertion sites thus characterized were common to all five strains, and so presumably preceded strain divergence; the 20 differential bands were used to construct a maximum-parsimony tree relating these strains. In four high-copy-number stocks (three wild-type strains and a subline), we determined occupancy of 35 individual Tc1 insertion sites by a polymerase chain reaction assay. Surprisingly, the high-copy strains share a common subset of these Tc1 insertions, and the chromosomal distribution of conserved Tc1 sites is "clustered" with respect to the other elements tested. These data imply a close evolutionary relationship among the high-copy strains, such that two of these strains appear to have been derived from the highest-copy-number lineage (represented by two stocks) through crossing with a low-Tc1 strain. Abundances of Tc1 elements were also estimated for the four high-copy-number stocks, at approximately 200-500 copies per haploid genome, by quantitative dot-blot hybridization relative to two low-copy strains. Annealing with 32P-labeled probes corresponding to full-length Tc1, an oligonucleotide within the Tc1 terminal inverted repeats, and an internal Tc1 oligonucleotide, gave essentially identical results--indicating that Tc1 termini exist in the genome primarily as components of full-length Tc1 elements. A composite evolutionary tree is proposed, based on the locations and numbers of Tc1 elements in these strains, which is consistent with a four-branch intraspecific tree deduced previously by maximum-parsimony analyses of mitochondrial sequence changes; it also serves to elucidate the evolutionary history of transposon mobility.

Tc1 transposition and mutator activity in a Bristol strain of Caenorhabditis elegans

In most strains of Caenorhabditis elegans with a low copy number of Tc1 transposable elements, germline transposition is rare or undetectable. We have observed low-level Tc1 transposition in the genome of the C. elegans var. Bristol strain KR579 (unc-13[e51]) resulting in an increase in Tc1 copy number and subsequent mutator activity. Examination of genomic blots from KR579 and KR579-derived strains revealed that more Tc1-hybridizing bands were present than in other Bristol strains. A novel Tc1-hybridizing fragment was cloned from a KR579-derived strain. Unique sequence DNA flanking the Tc1 element identified a 1.6 kb restriction fragment length difference between the KR579 and N2 strains consistent with a Tc1 insertion at a new genomic site. The site of insertion of this Tc1 was sequenced and is similar to the published Tc1 insertion site consensus sequence. Several isolates of KR579 were established and maintained on plates for a period of 3 years in order to determine if Tc1 copy number would continue to increase. In one isolate, KR1787, a further increase in Tc1 copy number was observed. Examination of the KR1787 strain has shown that it also exhibits mutator activity as assayed by the spontaneous mutation frequency at the unc-22 (twitcher) locus. The KR579 strain differs from most low copy number strains in that it exhibits low-level transposition which has developed into mutator activity.

Isolation and sequence analysis of Caenorhabditis briggsae repetitive elements related to the Caenorhabditis elegans transposon Tc1

We have identified two repetitive element families in the genome of the nematode Caenorhabditis briggsae with extensive sequence identity to the Caenorhabditis elegans transposable element Tc1. Five members each of the TCb1 (previously known as Barney) and TCb2 families were isolated by hybridization to a Tc1 probe. Tc1-hybridizing repetitive elements were grouped into either the TCb1 or TCb2 family based on cross-hybridization intensities among the C. briggsae elements. The genomic copy number of the TCb1 family is 15 and the TCb2 family copy number is 33 in the C. briggsae strain G16. The two transposable element families show numerous genomic hybridization pattern differences between two C. briggsae strains, suggestive of transpositional activity. Two members of the TCb1 family, TCb1#5 and TCb1#10, were sequenced. Each of these two elements had suffered an independent single large deletion. TCb1#5 had a 627-bp internal deletion and TCb1#10 had lost 316 bp of one end. The two sequenced TCb1 elements were highly conserved over the sequences they shared. A 1616-bp composite TCb1 element was constructed from TCb1#5 and TCb1#10. The composite TCb1 element has 80-bp terminal inverted repeats with three nucleotide mismatches and two open reading frames (ORFs) on opposite strands. TCb1 and the 1610-bp Tc1 share 58% overall nucleotide sequence identity, and the greatest similarity occurs in their ORF1 and inverted repeat termini.