The catalysis by heparin of the reaction between thrombin and antithrombin

A catalytic role of heparin within the extracellular matrix

We investigated the mechanism by which heparin enhances the binding of vascular endothelial growth factor (VEGF) to the extracellular matrix protein fibronectin. In contrast to other systems, where heparin acts as a protein scaffold, we found that heparin functions catalytically to modulate VEGF binding site availability on fibronectin. By measuring the binding of VEGF and heparin to surface-immobilized fibronectin, we show that substoichiometric amounts of heparin exposed cryptic VEGF binding sites within fibronectin that remain available after heparin removal. Measurement of association and dissociation kinetics for heparin binding to fibronectin indicated that the interaction is rapid and transient. We localized the heparin-responsive element to the C-terminal 40-kDa Hep2 domain of fibronectin. A mathematical model of this catalytic process was constructed that supports a mechanism whereby the heparin-induced conformational change in fibronectin is accompanied by release of heparin. Experiments with endothelial extracellular matrix suggest that this process may also occur within biological matrices. These results indicate a novel mechanism whereby heparin catalyzes the conversion of fibronectin to an open conformation by transiently interacting with fibronectin and progressively hopping from molecule to molecule. Catalytic activation of the extracellular matrix might be an important mechanism for heparin to regulate function during normal and disease states.

Characterisation of silica-based heparin affinity sorbents from equilibrium binding studies on plasma fractions containing thrombin

The binding properties of rigid heparin sorbents, synthesised by end-point-attachment of heparin onto aminopropylderivatised silica through reductive amination, were characterised through batch-adsorption studies employing human plasma fractions containing thrombin. Thrombin was quantified using a chromogenic assay that had been specially modified for these studies. These investigations yielded information regarding the maximum adsorption capacities/stoichiometries and binding affinities for thrombin present in complex protein mixtures. Of the two types of heparin-silica evaluated, heparin-Fractosil 1000, with a pore size of 1000 A, displayed a capacity of 2.4 mol of thrombin/mol of heparin (mol T-mol H). This stoichiometry was significantly higher than the value of 1.8 mol T-mol H obtained for the commercial soft gel heparin-Sepharose CL-6B. Furthermore, the heparin-Fractosil 1000 sorbents were superior in capacity and binding site accessibility to heparin-LiChroprep Si60 sorbents, where the smaller pore size of 60 A largely restricts the ligand-protein interactions to the outer surface of the sorbent particles. Nevertheless, heparin-LiChroprep Si60 sorbents were useful, in that they simulated a non-porous particle system, in which intra-pore diffusion effects are eliminated. The batch adsorption results with these sorbents indicated that the adsorption involved both high and low binding affinity characteristics. This bimodal binding mechanism was also evident with the commercial heparin-Sepharose sorbent. Binding stoichiometries and affinities in the high concentration range were similar to values reported for a largely non-specific electrostatic thrombin-heparin interaction. Dissociation constants in the nanomolar range were observed in the low concentrations range. This stronger binding affinity is more similar to highly specific bio-affinity interactions. Thus, the results indicated that heparin-thrombin interactions with these systems involve both a weak electrostatic and a strong biospecific interaction component.

Mechanism of thrombin inactivation by immobilized heparin

The ability of heparin to interact with plasma proteins, in particular antithrombin III (ATIII) and thrombin, is its primary mechanism as an anticoagulant drug. Research efforts have focused on the biological activity of heparin under three conditions: in solution as a free molecule, chemically coupled directly onto a polymer surface, and coupled onto a polymer surface using hydrophilic spacer groups. Each of these conditions yields altered biological activity, presumably a result of differing binding interactions with ATIII and thrombin. In this report, insights into binding interaction of direct versus polyethylene oxide space immobilized heparin with ATIII, thrombin, and the generation of the thrombin-antithrombin complex will be presented.

Mechanism of heparin action

Heparin catalysis of clotting proteinase inactivation occurs most efficiently through the reaction of the proteinase with the antithrombin-heparin complex. The efficiency of a heparin molecule in this reaction depends on the presence of a specific pentasaccharide sequence in it, and its molecular weight. The mechanism by which such high affinity heparin acts when antithrombin III is the inhibitor is promotion of the formation of an intermediate proteinase-heparin-antithrombin complex. Heparin promotion of thrombin inactivation by heparin cofactor II may occur by a similar mechanism. The requirement for a specific oligosaccharide sequence within the heparin molecule does not, however, exist for heparin cofactor II. Binding of heparin to both thrombin and antithrombin III interferes with thrombin inactivation. This binding is very dependent on the ionic strength of the reaction mixture and may explain some of the discordant results and interpretations from early studies on the mechanism of heparin action. Low ionic strength in in vitro reactions also results in cleavage of antithrombin III by thrombin in the presence of heparin and effectively converts antithrombin III from an inhibitor to a substrate.

Effect of a heparan sulphate with high affinity for antithrombin III upon inactivation of thrombin and coagulation factor Xa

The kinetics of inhibition of human alpha-thrombin and coagulation Factor Xa by antithrombin III were examined under pseudo-first-order reaction conditions as a function of the concentration of heparan sulphate with high affinity for antithrombin III. The maximum observed second-order rate constant was, for the antithrombin III-thrombin reaction, 1.2 x 10(9) M-1.min-1 compared with 2.4 x 10(9) M-1.min-1 in the presence of high-affinity heparin. However, the maximum rate was catalysed by much higher concentrations of heparan sulphate (1.3 microM) than of heparin (0.025 microM). Differences were also observed in the maximal acceleration of the antithrombin III-Factor Xa interaction: 1.2 x 10(9) M-1.min-1 at 0.2 microM-heparin sulphate compared with 2.2 x 10(9) M-1.min-1 at 0.04 microM-heparin. The differences in properties of heparan sulphate and heparin were analysed by using the random bi-reactant model of heparin action [Griffith (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 5460-5464]. It was observed that the apparent binding affinity for thrombin was higher for heparan sulphate (180 nM) than for heparin (14 nM). The rate constant for transformation of the antithrombin III-Factor Xa complex into irreversible product differed between heparan sulphate (96 min-1) and heparin (429 min-1). These properties of the high-affinity heparan sulphate may be of importance in consideration of a putative role in the control of intravascular haemostasis.

Effect of heparin on the interaction between thrombin and hirudin

The effect of heparin on the interaction between thrombin and hirudin has been examined by kinetic methods. Three forms of heparin fractionated on the basis of their affinity for antithrombin III and unfractionated heparin were found to act as noncompetitive inhibitors of the formation of the thrombin-hirudin complex. A three--four fold increase in the dissociation constant of the complex was observed at saturating heparin concentrations. This increase in the dissociation constant was due to a twofold decrease in the rate of association of thrombin and hirudin together with a similar increase in the rate of dissociation of the complex. Implications for the location of the heparin binding site on thrombin and the possible therapeutic use of the hirudin are discussed.

Comparison of the kinetic behavior of human and bovine proteins in the heparin-catalyzed antithrombin III/thrombin reaction

Significant differences between saturation kinetic properties of heparin-stimulated reactions between thrombin and antithrombin III from human and bovine species were observed. In both systems, the apparent Km for antithrombin III was higher than the KD for antithrombin III-heparin interaction, monitored by intrinsic protein fluorescence change. The Km for thrombin and kcat were much higher for proteins of the human species than the bovine species. The apparent Km for one human protein was dependent on the concentration of the other human protein, indicating interaction of the binding events. The reaction product formed from the bovine proteins was a potent inhibitor of the reaction but the product from the human proteins was a poor inhibitor. The major differences between the two species appeared to be related to interaction of thrombin or thrombin derivatives with heparin or heparin-antithrombin III complexes.

Multiple complexes of thrombin and heparin

Fluorescence polarization has been used to study the interaction of thrombin and heparin, and the catalysis by heparin of the combination of thrombin and antithrombin. At low ionic strength (20 mM Tris, pH 7.4), the addition of heparins of known molecular weights to thrombin led to the formation of large complexes (defined as 'complex 1'). Further addition of heparin led to a rearrangement of these large complexes to form smaller complexes (defined as 'complex 2'). The molar ratio of thrombin to heparin in complex 1 increased with increasing heparin molecular weight, and corresponded to one thrombin molecule for every heparin segment of Mr 3000. The stoichiometry of complex 2 was 1 heparin to 1 thrombin, irrespective of the heparin molecular weight. At higher ionic strength (150 mM NaCl) some complex 1 was still formed. However, by reversing the titration and adding thrombin to fluorescein-heparin the dissociation constant for complex 2 was estimated to be 1-3 microM and independent of the heparin molecular weight. The complex formed between thrombin and heparin, to which antithrombin was attached, has a dissociation constant of 1-2 microM, again irrespective of the heparin molecular weight. In the heparin-catalysed thrombin-antithrombin reaction, an increase in the size of heparin leads to a lowering of the observed Km for thrombin. A possible explanation is that thrombin, after initial binding to the heparin, moves rapidly to the site where it combines with antithrombin.