Variation in frequency of transformation by plasmid YRp7 in Saccharomyces cerevisiae

Protoplast transformation of Kluyveromyces marxianus

The dairy yeast Kluyveromyces marxianus is a promising cell factory for producing bioethanol and heterologous proteins, as well as a robust synthetic biology platform host, due to its safe status and beneficial traits, including fast growth and thermotolerance. However, the lack of high-efficiency transformation methods hampers the fundamental research and industrial application of this yeast. Protoplast transformation is one of the most commonly used fungal transformation methods, but it yet remains unexplored in K. marxianus. Here, we established the protoplast transformation method of K. marxianus for the first time. A series of parameters on the transformation efficiency were optimized: cells were collected in the late-log phase and treated with zymolyase for protoplasting; the transformation was performed at 0 °C with carrier DNA, CaCl₂ , and PEG; after transformation, protoplasts were recovered in a solid regeneration medium containing 3-4% agar and 0.8 m sorbitol. By using the optimized method, plasmids of 10, 24, and 58 kb were successfully transformed into K. marxianus. The highest efficiency reached 1.8 × 10⁴ transformants per μg DNA, which is 18-fold higher than the lithium acetate method. This protoplast transformation method will promote the genetic engineering of K. marxianus that requires high-efficiency transformation or the introduction of large DNA fragments.

Expression of monellin in a food-grade delivery system in Saccharomyces cerevisiae

BACKGROUND

Genetically modified (GM) foods have caused much controversy. Construction of a food-grade delivery system is a desirable technique with presumptive impact on industrial applications from the perspective of bio-safety. The aim of this study was to construct a food-grade delivery system for Saccharomyces cerevisiae and to study the expression of monellin from the berries of the West African forest plant Dioscoreophyllum cumminsii in this system.

RESULTS

A food-grade system for S. cerevisiae was constructed based on ribosomal DNA (rDNA)-mediated homologous recombination to enable high-copy-number integration of the expression cassette inserted into the rDNA locus. A copper resistance gene (CUP1) was used as the selection marker for yeast transformation. Because variants of transformants containing different copy numbers at the CUP1 locus can be readily selected after growth in the presence of elevated copper levels, we suggest that this system would prove useful in the generation of tandemly iterated gene clusters. Using this food-grade system, a single-chain monellin gene was heterologously expressed. The yield of monellin reached a maximum of 675 mg L(-1) .

CONCLUSION

This system harbors exclusively S. cerevisiae DNA with no antibiotic resistance genes, and it should therefore be appropriate for safe use in the food industry. Monellin was shown to be expressed in this food-grade delivery system. To our knowledge, this is the first report so far on expression of monellin in a food-grade expression system in S. cerevisiae.

Studies on the transformation of intact yeast cells by the LiAc/SS-DNA/PEG procedure

An improved lithium acetate (LiAc)/single-stranded DNA (SS-DNA)/polyethylene glycol (PEG) protocol which yields > 1 x 10(6) transformants/micrograms plasmid DNA and the original protocol described by Schiestl and Gietz (1989) were used to investigate aspects of the mechanism of LiAc/SS-DNA/PEG transformation. The highest transformation efficiency was observed when 1 x 10(8) cells were transformed with 100 ng plasmid DNA in the presence of 50 micrograms SS carrier DNA. The yield of transformants increased linearly up to 5 micrograms plasmid per transformation. A 20-min heat shock at 42 degrees C was necessary for maximal yields. PEG was found to deposit both carrier DNA and plasmid DNA onto cells. SS carrier DNA bound more effectively to the cells and caused tighter binding of 32P-labelled plasmid DNA than did double-stranded (DS) carrier. The LiAc/SS-DNA/PEG transformation method did not result in cell fusion. DS carrier DNA competed with DS vector DNA in the transformation reaction. SS plasmid DNA transformed cells poorly in combination with both SS and DS carrier DNA. The LiAc/SS-DNA/PEG method was shown to be more effective than other treatments known to make cells transformable. A model for the mechanism of transformation by the LiAc/SS-DNA/PEG method is discussed.

High efficiency transformation of intact yeast cells using single stranded nucleic acids as a carrier

A method, using LiAc to yield competent cells, is described that increased the efficiency of genetic transformation of intact cells of Saccharomyces cerevisiae to more than 1 X 10(5) transformants per microgram of vector DNA and to 1.5% transformants per viable cell. The use of single stranded, or heat denaturated double stranded, nucleic acids as carrier resulted in about a 100 fold higher frequency of transformation with plasmids containing the 2 microns origin of replication. Single stranded DNA seems to be responsible for the effect since M13 single stranded DNA, as well as RNA, was effective. Boiled carrier DNA did not yield any increased transformation efficiency using spheroplast formation to induce DNA uptake, indicating a difference in the mechanism of transformation with the two methods.

Transformation of yeast spheroplasts without cell fusion

The efficiency of genetic transformation of Saccharomyces cerevisiae spheroplasts has been increased 10- to 100-fold over previously published procedures. Optimal transformation frequencies for single-stranded and double-stranded replicating plasmids are 2 X 10(7) and 5 X 10(6) transformants/microgram, respectively. At saturating DNA concentrations, 12 and 3%, respectively, of the viable spheroplasts contain plasmid DNA. The percentage of transformants that have undergone nuclear fusion varies from 0.1 to 3%, indicating that fusion is not required for the uptake of DNA by yeast spheroplasts.

Cloning and mapping of Saccharomyces cerevisiae photoreactivation gene PHR1

The yeast Saccharomyces cerevisiae, like most organisms, is able to directly repair pyrimidine dimers by using a photoreactivating enzyme and visible light. Cells carrying the phr1 mutation were shown previously to be unable to photoreactivate dimers, but neither the map position nor the primary gene product of the PHR1 gene has been determined. We have cloned this gene and determined its map position. A plasmid containing a 6.4-kilobase yeast DNA insert has been isolated and shown to restore photoreactivation in a phr1 strain. A 3.1-kilobase subclone has also been shown to complement phr1. The original plasmid was targeted to integrate into chromosomal DNA at a site homologous to the insert by cutting within the insert. Two of these integrants have been mapped on the right arm of chromosome XV; the integrants have been further mapped at ca. 13 centimorgans from prt1. It has also been independently determined that phr1 maps at this location. Thus, we have determined the map position of PHR1 and also have shown that the plasmid contains PHR1 rather than a suppressor of the phr1 mutation.

Cloning and mapping of Saccharomyces cerevisiae photoreactivation gene PHR1

The yeast Saccharomyces cerevisiae, like most organisms, is able to directly repair pyrimidine dimers by using a photoreactivating enzyme and visible light. Cells carrying the phr1 mutation were shown previously to be unable to photoreactivate dimers, but neither the map position nor the primary gene product of the PHR1 gene has been determined. We have cloned this gene and determined its map position. A plasmid containing a 6.4-kilobase yeast DNA insert has been isolated and shown to restore photoreactivation in a phr1 strain. A 3.1-kilobase subclone has also been shown to complement phr1. The original plasmid was targeted to integrate into chromosomal DNA at a site homologous to the insert by cutting within the insert. Two of these integrants have been mapped on the right arm of chromosome XV; the integrants have been further mapped at ca. 13 centimorgans from prt1. It has also been independently determined that phr1 maps at this location. Thus, we have determined the map position of PHR1 and also have shown that the plasmid contains PHR1 rather than a suppressor of the phr1 mutation.

Transformation of protoplasted yeast cells is directly associated with cell fusion

The frequency of cell fusion during transformation of yeast protoplasts with various yeast plasmids with a chromosome replicon (YRp or YCp) or 2 mu DNA (YEp) was estimated by two methods. In one method, a mixture of protoplasts of two haploid strains with identical mating type and complementary auxotrophic nuclear markers with or without cytoplasmic markers was transformed. When the number of various phenotypic classes of transformants for the nuclear markers was analyzed by equations derived from binominal distribution theory, the frequency of nuclear fusion among the transformants was 42 to 100% in transformations with the YRp or YCp plasmids and 28 to 39% with the YEp plasmids. In another method, a haploid bearing the sir mutation, which allows a diploid (or polyploid) homozygous for the MAT (mating type) locus to sporulate by the expression of the silent mating-type loci HML and HMR, was transformed with the plasmids. Sporulation ability was found in 43 to 95% of the transformants with the YRp or YCp plasmids, and 26 to 31% of the YEp transformants. When cytoplasmic mixing was included with the nuclear fusion, 96 to 100% of the transformants were found to be cell fusants. Based upon these observations, we concluded that transformation of yeast protoplasts is directly associated with cell fusion.

Transformation of protoplasted yeast cells is directly associated with cell fusion

The frequency of cell fusion during transformation of yeast protoplasts with various yeast plasmids with a chromosome replicon (YRp or YCp) or 2 mu DNA (YEp) was estimated by two methods. In one method, a mixture of protoplasts of two haploid strains with identical mating type and complementary auxotrophic nuclear markers with or without cytoplasmic markers was transformed. When the number of various phenotypic classes of transformants for the nuclear markers was analyzed by equations derived from binominal distribution theory, the frequency of nuclear fusion among the transformants was 42 to 100% in transformations with the YRp or YCp plasmids and 28 to 39% with the YEp plasmids. In another method, a haploid bearing the sir mutation, which allows a diploid (or polyploid) homozygous for the MAT (mating type) locus to sporulate by the expression of the silent mating-type loci HML and HMR, was transformed with the plasmids. Sporulation ability was found in 43 to 95% of the transformants with the YRp or YCp plasmids, and 26 to 31% of the YEp transformants. When cytoplasmic mixing was included with the nuclear fusion, 96 to 100% of the transformants were found to be cell fusants. Based upon these observations, we concluded that transformation of yeast protoplasts is directly associated with cell fusion.

Direct selection of Saccharomyces cerevisiae resistant to the antibiotic G418 following transformation with a DNA vector carrying the kanamycin-resistance gene of Tn903

We have developed a new procedure for selecting yeast transformants without the need for complementing auxotrophic markers. The procedure is based on resistance to antibiotic G418 imparted to transformants by recombinant DNA vectors. We constructed several Escherichia coli-yeast shuttle vectors containing the kanamycin (G418)-resistance gene of Tn903, plus several yeast genes making dual selections possible. The efficiency for selecting G418-resistant transformants was dependent upon several factors including the composition of the growth medium and the time at which G418 selective pressure was administered. Media which contained levels of salts found in yeast nitrogen base rendered cells partially to completely resistant to G418 and could not be used for selecting G418-resistant transformants. On the other hand, untransformed cells remained sensitive to G418 when grown on YEPD medium thus allowing selection of G418-resistant transformants. A lag phase of 12 to 18 h, following growth at 30 degrees C, was required prior to administration of G418 to achieve maximal transformation frequency. Transformation frequencies ranged from 100 to 700 per micrograms of DNA and varied with the vector and strain used. The kanamycin gene imparted resistance to G418 in either the episomally or chromosomally integrated state. The gene was highly stable in the integrated state, even without selective pressure. The utility of the procedure was demonstrated by selecting transformants of four different strains of Saccharomyces cerevisiae and by cloning autonomous replication sequences (ARS) from the yeast Kluyveromyces lactis. We believe that this or related procedures could be used to develop transformation systems for many eukaryotic and prokaryotic cells for which no transformation procedure is available.