Influence of the preparation conditions on poly(ethylcyanoacrylate) nanocapsule formation

Natural biodegradable polymers based nano-formulations for drug delivery: A review

Nanomedicines are now considered as the new-generation medication in the current era mainly because of their features related to nano size. The efficacy of many drugs in their micro/macro formulations is shown to have poor bioavailability and pharmacokinetics after oral administration. To overcome this predicament, use of natural/synthetic biodegradable polymeric nanoparticles (NPs) have gained prominence in the field of nanomedicine for targeted drug delivery to improve biocompatibility, bioavailability, safety, enhanced permeability, better retention time and lower toxicity. For drug delivery, it is essential to have biodegradable nanoparticle formulations for safe and efficient transport and release of drug at the intended site. Moreover, depending on the target organ, a suitable biodegradable polymer can be selected as the drug-carrier for target specific as well as for sustained drug delivery. The aim of this review is to present the current status and scope of natural biodegradable polymers as well as some emerging polymers with special characteristics as suitable carriers for drug delivery applications. The most widely preferred preparation methods are discussed along with their characterization using different analytical techniques. Further, the review highlights significant features of methods developed using natural polymers for drug entrapment and release studies.

Recent advances in “bioartificial polymeric materials” based nanovectors

This chapter analyzes the advantages of the use of bioartificial polymers as carriers and the main strategies used for their design. Despite the enormous progresses in this field, more studies are required for the fully evaluation of these nanovectors in complex organisms and for the characterization of the pharmacodynamic and pharmacokinetic of the loaded drugs. Moreover, progresses in polymer chemistry are introducing a wide range of functionalities in the bioartificial polymeric material (BPM) nanostructures leading to a second generation of bioartificial polymer therapeutics based on novel and heterogeneous architectures with higher molecular weight and predictable structures, in order to achieve greater multivalency and increased loading capacity. Therefore, research on bioartificial polymeric nanovectors is an “on-going” field capable of attracting medical interest.

Nanotechnology in Sustainable Agriculture: Recent Developments, Challenges, and Perspectives

Nanotechnology monitors a leading agricultural controlling process, especially by its miniature dimension. Additionally, many potential benefits such as enhancement of food quality and safety, reduction of agricultural inputs, enrichment of absorbing nanoscale nutrients from the soil, etc. allow the application of nanotechnology to be resonant encumbrance. Agriculture, food, and natural resources are a part of those challenges like sustainability, susceptibility, human health, and healthy life. The ambition of nanomaterials in agriculture is to reduce the amount of spread chemicals, minimize nutrient losses in fertilization and increased yield through pest and nutrient management. Nanotechnology has the prospective to improve the agriculture and food industry with novel nanotools for the controlling of rapid disease diagnostic, enhancing the capacity of plants to absorb nutrients among others. The significant interests of using nanotechnology in agriculture includes specific applications like nanofertilizers and nanopesticides to trail products and nutrients levels to increase the productivity without decontamination of soils, waters, and protection against several insect pest and microbial diseases. Nanotechnology may act as sensors for monitoring soil quality of agricultural field and thus it maintain the health of agricultural plants. This review covers the current challenges of sustainability, food security and climate change that are exploring by the researchers in the area of nanotechnology in the improvement of agriculture.

Effect of solvents on forming poly(butyl-2-cyanoacrylate) encapsulated paeonol nanocapsules

The effect of ethanol or acetone, as oil phase solvents, upon the form of paeonol-loaded poly(butyl-2-cyanoacrylate) encapsulated nanocapsules (Pae@PNCs) by interfacial spontaneously polymerization were investigated. Pae@PNCs characterizations including morphology, radius distribution, polydispersity index (PDI), particle size, zeta potential, entrapment efficiency (EE%), drug loading (DL%) and in vitro paeonol release kinetics were evaluated. Results show that 100% acetone have a significant effect on forming nanocapsules, which showed the smaller size (168.3 ± 6.76 nm) under scanning electron microscopy (SEM) and one radius distribution by the particle size analyser. The data showed that using 100% acetone to prepare Pae@PNCs was leading to smaller particle size and lower polydispersity index (PDI), higher zeta potential, better EE (%) and perfect DL (%), which is linear decrease in radius (r² = 0.939) and PDI (r² = 0.974) and linear increase EE% (r² = 0.9879) and DL% (r² = 0.9892) with the acetone concentration (range 10-100% v/v). Paeonol encapsulated into and adhered on PNCs were confirmed by UV-Visible spectra (UV-Vis), Fourier transform infrared spectroscopy (FTIR) and Differential scanning calorimetry (DSC). Drug release behavior in vitro showed that 100% acetone as solvents on developing Pae@PNCs have greater advantages in controlling and prolonging paeonol release. Results demonstrated that solvents have a significant influence on forming Pae@PNCs.

Aerosol Delivery of siRNA to the Lungs. Part 2: Nanocarrier-based Delivery Systems

In this article, applications of engineered nanoparticles containing siRNA for inhalation delivery are reviewed and discussed. Diseases with identified protein malfunctions may be mitigated through the use of well-designed siRNA therapeutics. The inhalation route of administration provides local delivery of siRNA therapeutics to the lungs for various pulmonary diseases. A siRNA delivery system can be used to overcome the barriers of pulmonary delivery, such as anatomical barriers, mucociliary clearance, cough clearance, and alveolar macrophage clearance. Apart from naked siRNA aerosol delivery, previously studied siRNA carrier systems include those of lipidic, polymeric, peptide, or inorganic origin. These delivery systems can achieve pulmonary delivery through the generation of an aerosol via an inhaler or nebulizer. The preparation methodologies for these siRNA nanocarrier systems will be discussed herein. The use of inhalable nanocarrier siRNA delivery systems have barriers to their effective delivery, but overcoming these constraints while formulating a safe and effective delivery system will offer unique advances to the field of inhaled medicine.

Methods for the preparation and manufacture of polymeric nanoparticles

This review summarizes the different methods of preparation of polymer nanoparticles including nanospheres and nanocapsules. The first part summarizes the basic principle of each method of nanoparticle preparation. It presents the most recent innovations and progresses obtained over the last decade and which were not included in previous reviews on the subject. Strategies for the obtaining of nanoparticles with controlled in vivo fate are described in the second part of the review. A paragraph summarizing scaling up of nanoparticle production and presenting corresponding pilot set-up is considered in the third part of the review. Treatments of nanoparticles, applied after the synthesis, are described in the next part including purification, sterilization, lyophilization and concentration. Finally, methods to obtain labelled nanoparticles for in vitro and in vivo investigations are described in the last part of this review.

Magnetic PECA nanoparticles as drug carriers for targeted delivery: Synthesis and release characteristics

Magnetic poly(ethyl-2-cyanoacrylate) (PECA) nanoparticles containing anti-cancer drugs (Cisplatin and Gemcitabine) were prepared by inter-facial polymerization. The spherical nanoparticles (d = 250 +/- 15 nm) with smooth surfaces and moderately uniform size distributions were obtained. The amount of magnetite encapsulated inside the polymer matrix was increased up to 14.26% (w/w) by controlling the initial weight ratio of monomer/magnetite. It was found that the amount of Cisplatin encapsulated in the magnetic nanoparticle is much higher than that of Gemcitabine because Cisplatin (hydrophobic) is highly soluble in the oil phase and encapsulated easier inside nanoparticles compared to Gemcitabine (hydrophilic). The presence of magnetite and its super-paramagnetic characteristic were confirmed by FTIR spectra and VSM. In-vitro experiments of drug release and magnetic mobility under external magnetic field demonstrated that magnetic poly(ethyl-2-cyanoacrylate) (PECA) nanoparticles can be a highly versatile magnetic drug carrier with sustained release behaviour and sufficient magnetic susceptibility.

Design and production of nanoparticles formulated from nano-emulsion templates-a review

A considerable number of nanoparticle formulation methods are based on nano-emulsion templates, which in turn are generated in various ways. It must therefore be taken into account that active principles and drugs encapsulated in nanoparticles can potentially be affected by these nano-emulsion formulation processes. Such potential differences may include drug sensitivity to temperature, high-shear devices, or even contact with organic solvents. Likewise, nano-emulsion formulation processes must be chosen in function of the selected therapeutic goals of the nano-carrier suspension and its administration route. This requires the nanoparticle formulation processes (and thus the nano-emulsion formation methods) to be more adapted to the nature of the encapsulated drugs, as well as to the chosen route of administration. Offering a comprehensive review, this paper proposes a link between nano-emulsion formulation methods and nanoparticle generation, while at the same time bearing in mind the above-mentioned parameters for active molecule encapsulation. The first part will deal with the nano-emulsion template through the different formulation methods, i.e. high energy methods on the one hand, and low-energy ones (essentially spontaneous emulsification and the phase inversion temperature (PIT) method) on the other. This will be followed by a review of the different families of nanoparticles (i.e. polymeric or lipid nanospheres and nanocapsules) highlighting the links (or potential links) between these nanoparticles and the different nano-emulsion formulation methods upon which they are based.

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs across barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.

Nanoparticles and nanocapsules created using the Ouzo effect: spontaneous emulisification as an alternative to ultrasonic and high-shear devices

The preparation of polymeric particles and capsules by means of spontaneous droplet formation and subsequent polymer precipitation or synthesis is well-known. However, spontaneous emulsification is a phenomenon that has often been erroneously interpreted. This Minireview provides new insights into the preparation of metastable liquid dispersions by homogeneous liquid-liquid nucleation, and is based primarily on a recent study by Vitale and Katz (Langmuir, 2003, 19, 4105-4110). This spontaneous emulsification, which they named the Ouzo effect, occurs upon pouring, into water, a mixture of a totally water-miscible solvent and a hydrophobic oil--and optionally some water--thus generating long-lived small droplets, which are formed even though no surfactant is present. Herein, we review and reinterpret the most relevant publications on the synthesis of a variety of dispersions (pseudolatexes, silicone emulsions, biodegradable polymeric nanocapsules, etc.), which we believe have actually been synthesized using the Ouzo effect. The Ouzo effect may also become a substitute for high-shear techniques, which, to date have only been of limited utility on industrial scales.

Evidence for restrictive parameters in formulation of insulin-loaded nanocapsules

Poly(isobutylcyanoacrylate) nanocapsules with an oily core were originally proposed for lipophilic drug encapsulation [Int. J. Pharm. 28 (1986) 125] but insulin, a hydrosoluble protein, has also been successfully encapsulated by Damgé et al. [Diabetes 37 (1988) 246]. The aim of this work was to understand if several parameters were restrictive for the encapsulation of insulin into the oily core of the nanocapsules prepared by interfacial polymerization. The encapsulation efficiency of insulin was not affected by the type of insulin since the peptides adopted the same association state after their addition to the organic phase. Formulation parameters mainly affected the size of the nanocapsules obtained but did not influence the insulin encapsulation efficiency. In contrast, the order of introduction of insulin and of the monomer in the organic phase was shown to control the formation and the characteristics of the nanocapsules. The key parameters, which were found to clearly influence the encapsulation efficiency of insulin, were the pH of the aqueous insulin solution and the origin of the monomer. Both of these parameters can affect the rate of the interfacial polymerization. Consequently, the ability of insulin to be entrapped into the oil containing nanocapsules appeared to be governed more by the rate of the monomer polymerization.

Poly(alkylcyanoacrylates) as biodegradable materials for biomedical applications

This review considers the use of poly(alkylcyanoacrylates) (PACAs) as biomedical materials. We first present the different aspects of the polymerization of alkylcyanoacrylate monomers and briefly discuss their applications as skin adhesives, surgical glues and embolitic materials. An extensive review of the developments and applications of PACAs as nanoparticles for the delivery of drugs is then given. The methods of preparation of the nanoparticles are presented and considerations concerning the degradation, in vivo distribution, toxicity and cytotoxicity of the nanoparticles are discussed. The different therapeutic applications are presented according to the route of administration of the nanoparticles and include the most recent developments in the field.

Preparation techniques and mechanisms of formation of biodegradable nanoparticles from preformed polymers

The techniques available to prepare biodegradable nanoparticles (nanospheres and nanocapsules) from preformed polymers are reviewed. Although there is abundant literature on this topic, only a few focus on the thorough analysis of preparative procedures. In particular, four techniques are discussed in terms of their technological advantages and drawbacks: emulsification evaporation, solvent displacement, salting-out, and emulsification diffusion. The proposed mechanism of nanoparticle formation for each technique is described from a physicochemical perspective. The effects of preparative variables on nanoparticle size and drug-entrapment efficiency are also discussed.