Airborne Cladosporium and other fungi in damp versus reference residences

Aerobiological study of bacterial and fungal community composition in the atmosphere of Mexico City throughout an annual cycle

The atmosphere as a temporary habitat for airborne microbial communities is a valuable topic to explore, and it is through aerobiological studies that the diversity of biological particles and their release, emission, transport, deposition, and impact are assessed. Specific microorganisms are involved in meteorological processes, and phytosanitary and public health concerns. Airborne microbial composition is related to factors such as geographic region and weather conditions. In this study a metagenomic approach was used to determine the composition of bacterial and fungal communities in the air of two different land-use areas (urban area and semi-rural area), during dry and rainy seasons in Mexico City. Air sampling was carried out with a Hirst-type spore trap, collecting the samples simultaneously in both study areas. Forty-two bioaerosol samples were collected, and the DNA obtained was sequenced using Next-Generation Sequencing. The results indicated that the bacterial communities were represented mainly by the phyla Actinobacteria, Proteobacteria, Firmicutes, Bacteroidetes, Cyanobacteria, and the fungal communities by the phyla Ascomycota followed by Basidiomycota. The evident changes in microbial composition were related more to seasonality than to locality, since both UA and SRA showed a high degree of urbanization, despite some differences in land use. Continuous monitoring of atmospheric bioaerosols is essential to determine the influence of meteorological factors on the composition of the aerial microbiota.

Probabilistic assessment of the potential indoor air impacts of vent-free gas heating appliances in energy-efficient homes in the United States

Use of vent-free gas heating appliances for supplemental heating in U.S. homes is increasing. However, there is currently a lack of information on the potential impact of these appliances on indoor air quality for homes constructed according to energy-efficient and green building standards. A probabilistic analysis was conducted to estimate the impact of vent-free gas heating appliances on indoor air concentrations of carbon monoxide (CO), nitrogen dioxide (NO₂), carbon dioxide (CO₂), water vapor, and oxygen in "tight" energy-efficient homes in the United States. A total of 20,000 simulations were conducted for each Department of Energy (DOE) heating region to capture a wide range of home sizes, appliance features, and conditions, by varying a number of parameters, e.g., room volume, house volume, outdoor humidity, air exchange rates, appliance input rates (Btu/hr), and house heat loss factors. Predicted airborne levels of CO were below the U.S. Environmental Protection Agency (EPA) standard of 9 ppm for all modeled cases. The airborne concentrations of NO₂ were below the U.S. Consumer Product Safety Commission (CPSC) guideline of 0.3 ppm and the Health Canada benchmark of 0.25 ppm in all cases and were below the World Health Organization (WHO) standard of 0.11 ppm in 99-100% of all cases. Predicted levels of CO₂ were below the Health Canada standard of 3500 ppm for all simulated cases. Oxygen levels in the room of vent-free heating appliance use were not significantly reduced. The great majority of cases in all DOE regions were associated with relative humidity (RH) levels from all indoor water vapor sources that were less than the EPA-recommended 70% RH maximum to avoid active mold and mildew growth. The conclusion of this investigation is that when installed in accordance with the manufacturer's instructions, vent-free gas heating appliances maintain acceptable indoor air quality in tight energy-efficient homes, as defined by the standards referenced in this report.

IMPLICATIONS

Probabilistic modeling of indoor air concentrations of carbon monoxide (CO), nitrogen dioxide (NO₂), carbon dioxide (CO₂), water vapor, and oxygen associated with use of vent-free gas heating appliances provides new data indicating that uses of these devices are consistent with acceptable indoor air quality in "tight" energy-efficient homes in the United States. This study will provide authoritative bodies such as the International Code Council with definitive information that will assist in the development of future versions of national building codes, and will provide evaluation of the performance of unvented gas heating products in energy conservation homes.

Determinants, reproducibility, and seasonal variation of ergosterol levels in house dust

This study aimed to clarify the determinants that affect the concentrations of ergosterol and viable fungi in house dust and to examine the seasonal variation and reproducibility of ergosterol concentrations indoors. In studying the determinants, dust samples from living room floors and vacuum cleaner dust bags were collected from 107 farming and 105 non-farming homes. Ergosterol levels were determined with gas chromatography-mass spectrometry,and the dust bag dust was cultivated for enumeration of fungal genera. Lifestyle and environmental factors, for example using of the fireplace, and visible mold observations in homes, explained 20–26% of the variation of fungal concentrations. For the reproducibility study, samples were collected from five urban homes in four different seasons. The reproducibility of ergosterol determinations within a sample was excellent (ICC = 89.8) for floor dust and moderate (ICC = 63.8) for dust bag dust, but poor when sampling the same home throughout a year (ICC = 31.3 and 12.6, respectively) due to large temporal variation in ergosterol concentrations. In conclusion, environmental characteristics only partially predicted the variation of fungal concentrations. Based on these studies, we recommend repeated sampling of dust over time if one seeks to adequately describe overall fungal levels and exposure in a home.

PRACTICAL IMPLICATIONS

This study shows that levels of ergosterol and viable fungi in house dust are related to visible mold observations. Only 20% of the variation in fungal levels can be explained with questionnaires, and therefore, environmental samples need to be taken in addition. Reproducibility of ergosterol determination was excellent for floor dust, and thus, ergosterol measurements from floor dust samples could be suitable for assessing the fungal load in building investigations. The temporal variation needs to be taken into account when describing the ergosterol concentration of urban homes.

Exposure level and distribution characteristics of airborne bacteria and fungi in Seoul metropolitan subway stations

The exposure level and distribution characteristics of airborne bacteria and fungi were assessed in the workers' activity areas (station office, bedroom, ticket office and driver's seat) and passengers' activity areas (station precinct, inside the passenger carriage, and platform) of the Seoul metropolitan subway. Among investigated areas, the levels of airborne bacteria and fungi in the workers' bedroom and station precincts were relatively high. No significant difference was found in the concentration of airborne bacteria and fungi between the underground and above ground activity areas of the subway. The genera identified in all subway activity areas with a 5% or greater detection rate were Staphylococcus, Micrococcus, Bacillus and Corynebacterium for airborne bacteria and Penicillium, Cladosporium, Chrysosporium, Aspergillus for airborne fungi. Staphylococcus and Micrococcus comprised over 50% of the total airborne bacteria and Penicillium and Cladosporium comprised over 60% of the total airborne fungi, thus these four genera are the predominant genera in the subway station.

Microbial volatile organic compounds

Microbial volatile organic compounds (MVOCs) are a variety of compounds formed in the metabolism of fungi and bacteria. Of more than 200 compounds identified as MVOCs in laboratory experiments, none can be regarded as exclusively of microbial origin or as specific for certain microbial species. Thus, the recognition of microbially contaminated areas by MVOC measurements is not successful with current methods. In this review, the basic physical and chemical properties of 96 typical MVOCs have been summarised. Of these, toxicological and exposure data were gathered for the 15 MVOCs most often analysed and reported in buildings with moisture and microbial damage. The most obvious health effect of MVOC exposure is eye and upper-airway irritation. However, in human experimental exposure studies, symptoms of irritation have appeared at MVOC concentrations several orders of magnitude higher than those measured indoors (single MVOC levels in indoor environments have ranged from a few ng/m(3) up to 1 mg/m(3)). This is also supported by dose-dependent sensory-irritation response, as determined by the American Society for Testing and Materials mouse bioassay. On the other hand, the toxicological database is poor even for the 15 examined MVOCs. There may be more potent compounds and other endpoints not yet evaluated.

Real-time PCR for detection of the Aspergillus genus

Aspergillus is a genus of mold that has strong indoor sources, including several species capable of acting as opportunistic pathogens. Previous studies suggest that Aspergillus could serve as an indicator for abnormal mold growth or moisture, making it an important genus for environmental monitoring. Here, a quantitative polymerase chain reaction (qPCR, or real-time PCR) assay is presented for Aspergillus. The assay shows good specificity for the genus, detecting all Aspergillus species tested, although a few non-Aspergillus species are also amplified. Sensitivity testing demonstrates that DNA representing one conidium can be detected. A validation study compared qPCR results against direct microscopy counts using A. fumigatus conidia aerosolized into a laboratory chamber. The assay was then used to quantify Aspergillus in indoor air samples, demonstrating its utility for environmental monitoring. Analysis of a small number of clinical sputum samples showed complete agreement with culturing results.

Prevalence and predictors of residential health hazards: a pilot study

This article reports the results of a pilot study designed to ascertain the prevalence of lead-based paint (LBP), vermin, mold, and safety conditions and hazards and to validate observations and self-reports against environmental sampling data. Data are based on a convenience sample of 70 dwellings in a low-income, urban neighborhood in Brooklyn, New York. The vast majority of residences (96%) contained multiple conditions and/or hazards: LBP hazards (80%), vermin (79%), elevated levels of airborne mold (39%), and safety hazards (100%). Observations and occupant reports were associated with environmental sampling data. In general, the more proximate an observed condition was to an actual hazard, the more likely it was to be associated with environmental sampling results (e.g., peeling LBP was associated with windowsill dust lead levels, and cockroach sightings by tenants were associated with Blatella germanica [Bla g 1] levels). Conversely, the more distal an observed condition was to an actual hazard, the less likely it was to be associated with environmental sampling results (e.g., water damage, alone, was not statistically associated with elevated levels of dust lead, Bla g 1, or airborne mold). Based on the findings from this pilot study, there is a need for industrial hygienists and others to adopt more comprehensive and integrative approaches to residential hazard assessment and remediation. Further research--using larger, randomly drawn samples, representing a range of housing types and geographical areas--is needed to clarify the relationship between readily observable conditions, occupant reports, and environmental sampling data and to assess the cumulative impact on human health.

Microbial growth inside insulated external walls as an indoor air biocontamination source

The association between moisture-related microbial growth (mesophilic fungi and bacteria) within insulated exterior walls and microbial concentrations in the indoor air was studied. The studied apartment buildings with precast concrete external walls were situated in a subarctic zone. Actinomycetes in the insulation layer were found to have increased concentrations in the indoor air. The moisture content of the indoor air significantly affected all measurable airborne concentrations.

Prevalence and residential determinants of fungi within homes in Melbourne, Australia

BACKGROUND

Recent epidemiological studies suggest that the adverse respiratory health effects caused by the inhalation of fungal propagules are substantial. Knowledge of the prevalence and environmental determinants of indoor fungal levels is essential in designing effective avoidance measures.

AIM

To investigate the prevalence of fungi and the influence of residential characteristics on levels of fungi within homes in Melbourne, Australia.

METHODS

Floor dust and air samples were collected from bedrooms in 485 houses over 1 year. The dust was analysed for ergosterol, a marker of cumulative fungal biomass exposure. Total and genera-specific fungal propagules were identified in air samples. Details of the relevant residential characteristics were documented using a questionnaire. Independent predictors (P < 0.05) of ergosterol and total fungal propagules were identified by multiple linear regression.

RESULTS

Fifty-five percent of the houses had viable fungal propagules exceeding 500 CFU/m3. Cladosporium and Penicillium were identified as the most prevalent and abundant fungal genera in indoor air. The median ergosterol level in bedroom floor was 3.8 microg/g of dust. Multivariate analysis showed that total fungal propagules in indoor air were lower in bedrooms with a ceiling fan, without visible mould, and those that were more frequently vacuumed, had a solid fuel fire, had windows closed at the time of the sampling or lacked pets. The presence of more than one cat had the greatest effect on total fungal propagules. Ergosterol levels were significantly lower in homes without old fitted carpets, visible mould or pets and those with frequent airing and regular use of an extractor fan in the kitchen. Old wall-to-wall carpets had the greatest effect on ergosterol.

CONCLUSIONS

High indoor fungal exposures were associated with infrequent ventilation or vacuuming, presence of pets, visible mould and old carpets.

Volatile compounds originating from mixed microbial cultures on building materials under various humidity conditions

We examined growth of mixed microbial cultures (13 fungal species and one actinomycete species) and production of volatile compounds (VOCs) in typical building materials in outside walls, separating walls, and bathroom floors at various relative humidities (RHs) of air. Air samples from incubation chambers were adsorbed on Tenax TA and dinitrophenylhydrazine cartridges and were analyzed by thermal desorption-gas chromatography and high-performance liquid chromatography, respectively. Metabolic activity was measured by determining CO2 production, and microbial concentrations were determined by a dilution plate method. At 80 to 82% RH, CO2 production did not indicate that microbial activity occurred, and only 10% of the spores germinated, while slight increases in the concentrations of some VOCs were detected. All of the parameters showed that microbial activity occurred at 90 to 99% RH. The microbiological analyses revealed weak microbial growth even under drying conditions (32 to 33% RH). The main VOCs produced on the building materials studied were 3-methyl-1-butanol, 1-pentanol, 1-hexanol, and 1-octen-3-ol. In some cases fungal growth decreased aldehyde emissions. We found that various VOCs accompany microbial activity but that no single VOC is a reliable indicator of biocontamination in building materials.

Indoor airborne fungal spores, house dampness and associations with environmental factors and respiratory health in children

BACKGROUND

Children living in a damp house are more likely to suffer from respiratory symptoms and it has been suggested that exposure to fungi is an important contributing factor. However, more knowledge about underlying mechanisms for the association are needed.

OBJECTIVE

To identify associations between measures of house dampness, levels of airborne fungal spores, housing factors and health outcomes in children.

METHODS

Eighty households with 148 children between 7 and 14 years of age were recruited in the Latrobe Valley, Victoria, Australia. Some 36% of participating children were asthmatic. Six sampling visits were made to each house between March 1994 and February 1995 on a 2-monthly cycle. Samples for airborne total and viable fungal spores were collected from bedrooms, living rooms, kitchens and outdoors. A detailed dwelling characterization, using a questionnaire and inspection surveys, was carried out. Skin-prick tests were performed with extracts of common aeroallergens and a respiratory questionnaire was completed for each child.

RESULTS

Large airborne fungal spore concentrations were recorded in association with: musty odour, water intrusion, high indoor humidity, limited ventilation through open windows, few extractor fans and failure to remove indoor mould growth. Visible mould growth or condensation evidence was associated with large concentrations of Cladosporium spores, but not with large total spore concentrations. Penicillium exposure was a risk factor for asthma, while Aspergillus exposure was a risk factor for atopy. Fungal allergies were more common among children exposed to Cladosporium or Penicillium in winter or to musty odour. Respiratory symptoms were marginally more common with exposure to Cladosporium or total spores in winter.

CONCLUSION

Indoor exposure to certain fungal genera in winter was a risk factor for asthma, atopy and respiratory symptoms in children. On the other hand, no significant associations were seen between average viable or total spore concentrations and child health. Actual measurements of fungal spores predict health outcomes better than reported dampness.

Functional and causal relationships between indoor and outdoor airborne fungi

From May to October, relationships of total numbers of airborne fungal propagules between indoor and outdoor sampling sites were very strong, particularly for Alternaria and Leptosphaeria, while that for unidentified ascospores was positive but to a lesser degree. Indoor and outdoor counts of Cladosporium, Epicoccum, Ganoderma, unidentified spores, hyphal fragments, and biodiversity (total number of fungal genera) were also significantly positively related. There appeared to be no functional relationship between Aspergillus/Penicillium conidia in indoor and outdoor air. From November to April, indoor and outdoor counts of Alternaria, Ganoderma, and hyphal fragments displayed negative relationships, but there was a positive correlation for Cladosporium, Epicoccum, Leptosphaeria, unidentified ascospores, total fungal spores, unidentified spores, and biodiversity. Once again, no functional relationship was detected between Aspergillus/Penicillium indoors and outdoors. The functional relationships of airborne fungi with indoor environmental factors are examined and discussed. A lack of causal relationships, as detected by path analysis, indicates that airborne spores of Alternaria, Leptosphaeria, unidentified ascospores, Coprinus, and Ganoderma came mainly from outdoor sources. All path models fitted this hypothesis well, except for Aspergillus/Penicillium. On the other hand, path analysis suggested that there were probably indoor sources of Cladosporium, Epicoccum, Aspergillus/Penicillium, unidentified basidiospores, and unidentified spores. Most of the models explained a large proportion of variance of indoor airborne fungi. Keywords: airborne fungal spores, redundancy analysis, path analysis.