Pharmaceutical and Cosmetic Uses of Fibrous Clays

Natural and Synthetic Clay Minerals in the Pharmaceutical and Biomedical Fields

Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses.

Bentonite- and Palygorskite-Based Gels for Topical Drug Delivery Applications

Bentonite or palygorskite-based hydrogels have recently been suggested as a strategy to increase bioavailability and control the retention and release of therapeutic candidates. In this work, clay-based hydrogels loaded with diclofenac acid nanocrystals have been successfully designed and developed. The aim was to improve diclofenac solubility, its dissolution rate and to enhance its local bioavailability after topical application. For this purpose, diclofenac acid nanocrystals were prepared by wet media milling technology and then loaded into inorganic hydrogels based on bentonite and/or palygorskite. Diclofenac acid nanocrystals were characterized by morphology, size, and zeta potential. Moreover, rheological behavior, morphology, solid state, release studies, and in vitro skin penetration/permeation of diclofenac acid nanocrystals-loaded hydrogels were performed. The hydrogels were characterized by a crystalline structure, and demonstrated that the inclusion of diclofenac in clay-based hydrogels resulted in an increased thermal stability. The presence of both palygorskite and bentonite reduced nanocrystal mobility, and consequently its release and penetration into the skin. On the other hand, bentonite- or palygorskite-based hydrogels revealed great potential as an alternative strategy to enhance topical bioavailability of DCF nanocrystals, enhancing their penetration to the deeper skin layers.

Clay-Based Hydrogels as Drug Delivery Vehicles of Curcumin Nanocrystals for Topical Application

The poor water solubility of a significant number of active pharmaceutical ingredients (API) remains one of the main challenges in the drug development process, causing low bioavailability and therapeutic failure of drug candidates. Curcumin is a well-known Biopharmaceutics Classification System (BCS) class IV drug, characterized by lipophilicity and low permeability, which hampers topical bioavailability. Given these premises, the aim of this work was the design and the development of curcumin nanocrystals and their incorporation into natural inorganic hydrogels for topical application. Curcumin nanocrystals were manufactured by the wet ball milling technique and then loaded in clay-based hydrogels. Bentonite and/or palygorskite were selected as the inorganic gelling agents. Curcumin nanocrystal-loaded hydrogels were manufactured by means of a homogenization process and characterized with respect to their chemico-physical properties, in vitro release, antioxidant activity and skin permeation. The results highlighted that the presence of bentonite provided an increase of curcumin skin penetration and simultaneously allowed its radical scavenging properties, due to the desirable rheological characteristics, which should guarantee the necessary contact time of the gel with the skin.

Characterization and purification of Algerian natural bentonite for pharmaceutical and cosmetic applications

INTRODUCTION

Bentonitic clays from the Hammam Boughrara deposit in the Maghnia area (northwestern Algeria) were studied by mineralogical, chemical and physicochemical characterization to evaluate their potential suitability as raw and purified materials in pharmaceutical and cosmetic applications.

METHODOLOGY

Natural bentonite was purified by Na+ ion exchange treatment combined with sedimentation techniques. Before use in the pharmaceutical industry, bentonite samples must be safe and conform to recommendations and directives of pharmacopeia. A set of technological tests were investigated with the samples, such as cation exchange capacity (CEC), specific surface area (SSA), swelling capacity (SC),sedimentation volume (SV) and viscosity, and mineralogical, chemical and microbial properties were also identified by X-ray fluorescence (XRF), X-ray diffraction (XRD) and scanning electron microscopy (SEM).

RESULTS

Mineralogical data proved that the raw bentonite is mainly composed of smectite and illite with small quantities of gangue minerals such quartz, feldspars (orthoclase and albite) and calcite. The purified bentonite matches the mineralogical properties of Wyoming bentonite as an international standard clay (deposits of high economic value). Quartz and feldspars were successfully eliminated in the absence of illite and calcite after beneficiation. Investigation of chemical analyses indicated that the contents of trace elements (particularly Pb and As) were below the more restrictive limits proposed by major pharmacopeias for raw and purified bentonite clay. For microbiological tests, the absence of Escherichia coli, Salmonella species, Staphylococcus aureus and Pseudomonas aeruginosa was confirmed. Moreover, we note that a high cation exchange capacity, large surface area, and good swelling capacity and sedimentation volume were also obtained for purified bentonite.

CONCLUSION

In view of the fundamentals of major pharmacopoeias for the use of bentonite in pharmacies and considering the results obtained, we identified a pharmaceutically acceptable designation for purified Algerian bentonite, which can be used as a pharmaceutical excipient and in cosmetic products such as creams, powders and emulsions.

Clay nanoparticles as pharmaceutical carriers in drug delivery systems

INTRODUCTION

Clay minerals are a class of silicates with chemical inertness, colloid, and thixotropy, which have excellent physicochemical properties, good biocompatibility, low toxicity, and have high application potential in biomedical fields. These inorganic materials have been widely used in pharmaceutical excipients and active substances. In recent years, nanoclay mineral materials have been used as drug vehicles for the delivery of a variety of drugs based on their broad specific surface area, rich porosity, diverse morphology, good adsorption performance, and high ion exchange capacity.

AREAS COVERED

This review introduces the structures, properties, and applications of various common natural and synthetic nanoclay materials as drug carriers. Natural nanoclays have different morphologies including nanoplates, nanotubes, and nanofibers. Synthetic materials have controllable sizes and flexible structures, where mesoporous silica nanoparticles, laponite, and imogolite are typical ones. These inorganic nanoparticles are often linked to polymers to form multifunctional drug delivery systems for better pharmaceutical performance.

EXPERT OPINION

The clay nanomaterials have typical properties, including enhanced solubility of insoluble drugs, targeting therapeutic sites, controlled release, and stimulation of responsive drug delivery systems.

Safety of Nanoclay/Spring Water Hydrogels: Assessment and Mobility of Hazardous Elements

The presence of impurities in medicinal products have to be controlled within safety limits from a pharmaceutical quality perspective. This matter is of special significance for those countries and regions where the directives, guidelines, or legislations, which prescribe the rules for the application of some products is quite selective or incomplete. Clay-based hydrogels are quite an example of this matter since they are topically administered, but, in some regions, they are not subjected to well-defined legal regulations. Since hydrogels establish an intimate contact with the skin, hazardous elements present in the ingredients could potentially be bioavailable and compromise their safety. The elemental composition and mobility of elements present in two hydrogels have been assessed. Sepiolite, palygorskite, and natural spring water were used as ingredients. The release of a particular element mainly depends on its position in the structure of the hydrogels, not only on its concentration in each ingredient. As a general trend, elements' mobility reduced with time. Among the most dangerous elements, whose presence in cosmetics is strictly forbidden by European legal regulations, As and Cd were mobile, although in very low amounts (0.1 and 0.2 μg/100 g of hydrogel, respectively). That is, assuming 100% bioavailability, the studied hydrogels would be completely safe at normal doses. Although there is no sufficient evidence to confirm that their presence is detrimental to hydrogels safety, legally speaking, their mobility could hinder the authorization of these hydrogels as medicines or cosmetics. In conclusion, the present study demonstrates that hydrogels prepared with sepiolite, palygorskite, and Alicún spring water could be topically applied without major intoxication risks.

Wound Healing Activity of Nanoclay/Spring Water Hydrogels

BACKGROUND

hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed.

METHODS

in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process.

RESULTS

all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control.

CONCLUSION

fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations.

Natural Inorganic Ingredients in Wound Healing

Background:

One of the major clinical challenges is to achieve a rapid and efficient treatment of complex chronic wounds. Nowadays, most wound dressings currently available are unable to find a solution the challenges of resistance to bacterial infection, protein adsorption and increased levels of exudates. Natural inorganic ingredients (clay minerals, metal cations, zeolites, etc) could be the key to solve the problem satisfactorily. Some of these materials have shown biocompatibility and ability to enhance cell adhesion, proliferation and cellular differentiation and uptake. Besides, some natural inorganic ingredients effectively retain drugs, allowing the design of drug delivery matrices.

Objective:

possibilities of natural inorganic ingredients in wound healing treatments have been reviewed, the following sections have been included: 1. Introduction 2. Functions of Inorganic Ingredients in wound healing 2.1. Antimicrobial effects 2.2. Hemostatic effects 3. Clay minerals for wound healing 3.1. Clay minerals 3.2. Clay mineral semisolid formulations 3.3. Clay/polymer composites and nanocomposites 3.4. Clay minerals in wound dressings 4. Other inorganic materials for wound healing 4.1. Zeolites 4.2. Silica and other silicates 4.3. Other minerals 4.4. Transition metals 5. Conclusion

Conclusion:

inorganic ingredients possess useful features in the development of chronic wounds advanced treatments. They improve physical (mechanical resistance and water vapor transmission), chemical (release of drugs, hemostasis and/or adsorption of exudates and moisture) and biological (antimicrobial effects and improvement of healing) properties of wound dressings. In summary, inorganic ingredients have proved to be a promising and easily accessible products in the treatment of wounds and, more importantly, chronic wounds.

Variations in the Texture Profile Analysis (TPA) Properties of Clay/Mineral-Medicinal Water Mixtures for Pelotherapy: Effect of Anion Type

A peloid’s liquid phase can be mineral, sea or salt-lake water. This study examines the interactions among three materials, two special clays (bentonite and sepiolite) and one common clay, and three chemically different mineral-medicinal waters. In all clay–water mixtures, the hardness and adhesiveness decreased with the amount of water in the mixture. For a given hardness or adhesiveness, sepiolite retained more water than the other clays, especially in the presence of sulphate-rich mineral-medicinal water (73%). In contrast, the common clay retained the least amount of water (26%), and the bentonite samples returned an intermediate value for the amount of retained water (52–53%). These differences had a strong influence on the thermal behaviour of the mixtures and, hence, should be taken into account for their use in thermotherapy applications. There were no significant differences in the instrumental texture of the clay pastes according to the predominant anion in the mineral-medicinal waters.

The Use of Some Clay Minerals as Natural Resources for Drug Carrier Applications

The goal of modern research is to use environmentally preferable materials. In this context, clay minerals are emerging candidates for their bio- and ecocompatibility, low cost and natural availability. Clay minerals present different morphologies according to their layer arrangements. The use of clay minerals, especially in biomedical applications is known from ancient times and they are regaining attention in recent years. The most representative clay minerals are kaolinit, montmorillonite, sepiolites and halloysite. This review summarizes some clay minerals and their derivatives for application as nanocontainer for biologically active species.