The hemostatic performance and mechanism of palygorskite with structural regulate by oxalic acid gradient leaching

Palygorskite (Pal) is a naturally available one-dimensional clay mineral, featuring rod-shaped morphology, nanoporous structure, permanent negative charges as well as abundant surface hydroxyl groups, exhibiting promising potential as a natural hemostatic material. In this study, the hemostatic performance and mechanisms of Pal were systematically investigated based on the structural regulate induced by oxalic acid (OA) gradient leaching from perspectives of structure, surface attributes and ion release.In vitroandin vivohemostasis evaluation showed that Pal with OA leaching for 1 h exhibited a superior blood procoagulant effect compared with the raw Pal as well as the others leached for prolonging time. This phenomenon might be ascribed to the synergistic effect of the intact nanorod-like morphology, the increase in the surface negative charge, the release of metal ions (Fe3+and Mg2+), and the improved blood affinity, which promoted the intrinsic coagulation pathway, the fibrinogenesis and the adhesion of blood cells, thereby accelerating the formation of robust blood clots. This work is expected to provide experimental and theoretical basis for the construction of hemostatic biomaterials based on clay minerals.

Investigation into Brazilian Palygorskite for Its Potential Use as Pharmaceutical Excipient: Perspectives and Applications

Palygorskite is an aluminum and magnesium silicate characterized by its fibrous morphology, providing it with great versatility in industrial applications, including pharmaceuticals. Although most of the reserves are in the United States, in recent years occurrences of commercially exploited deposits in Brazil have been recorded, mainly in the country's northeast region. This has motivated this study, which analyzes raw Brazilian palygorskite compared to a commercial sample (Pharmasorb^® colloidal) to demonstrate its pharmaceutical potential. The chemical and mineral composition of the samples were evaluated for surface properties, granulometry, morphology, crystallography, thermal analysis, and spectroscopy. Raw palygorskite presented 67% purity, against 74% for Pharmasorb^® colloidal. The percentage purity relates to the presence of contaminants, mainly carbonates and quartz (harmless under conventional conditions of pharmaceutical use). Furthermore, it was possible to confirm the chemical composition of these phyllosilicates, formed primarily of silicon, aluminum, and magnesium oxides. The crystallographic and spectroscopic profiles were consistent in both samples, showing characteristic peaks for palygorskite (2θ = 8.3°) and bands attributed to fibrous phyllosilicates below 1200 cm^-1, respectively. The thermal analysis allowed the identification of the main events of palygorskite, with slight differences between the evaluated samples: loss of water adsorbed onto the surface (~85 °C), removal of water contained in the channels (~200 °C), coordinated water loss (~475 °C), and, finally, the dehydroxylation (>620 °C). The physicochemical characteristics of raw palygorskite align with pharmacopeial specifications, exhibiting a high specific surface area (122 m²/g), moderately negative charge (-13.1 mV), and compliance with the required limits for heavy metals and arsenic. These favorable technical attributes indicate promising prospects for its use as a pharmaceutical ingredient in the production of medicines and cosmetics.

Biocomposite for Prolonged Release of Water-Soluble Drugs

This study aimed to develop a prolonged-release system based on palygorskite and chitosan, which are natural ingredients widely available, affordable, and accessible. The chosen model drug was ethambutol (ETB), a tuberculostatic drug with high aqueous solubility and hygroscopicity, which is incompatible with other drugs used in tuberculosis therapy. The composites loaded with ETB were obtained using different proportions of palygorskite and chitosan through the spray drying technique. The main physicochemical properties of the microparticles were determined using XRD, FTIR, thermal analysis, and SEM. Additionally, the release profile and biocompatibility of the microparticles were evaluated. As a result, the chitosan-palygorskite composites loaded with the model drug appeared as spherical microparticles. The drug underwent amorphization within the microparticles, with an encapsulation efficiency greater than 84%. Furthermore, the microparticles exhibited prolonged release, particularly after the addition of palygorskite. They demonstrated biocompatibility in an in vitro model, and their release profile was influenced by the proportion of inputs in the formulation. Therefore, incorporating ETB into this system offers improved stability for the administered product in the initial tuberculosis pharmacotherapy dose, minimizing its contact with other tuberculostatic agents in the treatment, as well as reducing its hygroscopicity.

Silk Nanofibril-Palygorskite Composite Membranes for Efficient Removal of Anionic Dyes

To develop membrane materials with good performance for water purification that are green and low cost, this work reports an organic-inorganic composite membrane composed of silk nanofibrils (SNFs) and palygorskite (PGS). To improve the stability of the the composite membrane, genipin was used as a crosslinking agent to induce the conformational transition of SNF chains from random coils to β-sheets, reducing the swelling and hydrolysis of the membrane. The separation performance can be adjusted by tailoring the component ratio of the nanomaterial. The results showed that these membranes can effectively remove anionic dyes from water, and they exhibit excellent water permeability. The SNF-based membrane had strong mechanical and separation properties, and the PGS could tune the structure of composite membranes to enhance their permeability, so this green composite membrane has good prospects in water treatment and purification applications.

Immobilization of EreB on Acid-Modified Palygorskite for Highly Efficient Degradation of Erythromycin

Erythromycin is one of the most commonly used macrolide antibiotics. However, its pollution of the ecosystem is a significant risk to human health worldwide. Currently, there are no effective and environmentally friendly methods to resolve this issue. Although erythromycin esterase B (EreB) specifically degrades erythromycin, its non-recyclability and fragility limit the large-scale application of this enzyme. In this work, palygorskite was selected as a carrier for enzyme immobilization. The enzyme was attached to palygorskite via a crosslinking reaction to construct an effective erythromycin-degradation material (i.e., EreB@modified palygorskite), which was characterized using FT-IR, SEM, XRD, and Brunauer-Emmett-Teller techniques. The results suggested the successful modification of the material and the loading of the enzyme. The immobilized enzyme had a higher stability over varying temperatures (25-65 °C) and pH values (6.5-10.0) than the free enzyme, and the maximum rate of reaction (V_max) and the turnover number (k_cat) of the enzyme increased to 0.01 mM min^-1 and 169 min^-1, respectively, according to the enzyme-kinetics measurements. The EreB@modified palygorskite maintained about 45% of its activity after 10 cycles, and degraded erythromycin in polluted water to 20 mg L^-1 within 300 min. These results indicate that EreB could serve as an effective immobilizing carrier for erythromycin degradation at the industrial scale.

Structural Evolution of Palygorskite as the Nanocarrier of Silver Nanoparticles for Improving Antibacterial Activity

The carrier performance of palygorskite (Pal) can be significantly affected by its structure, morphology, and activity, which was regulated by controlling the dissolution degree of the metal-oxygen octahedron of raw Pal (RPal) under the action of oxalic acid (OA) in this study. The RPal and OA-leached RPal (OPal) then served as supports for immobilizing silver nanoparticles (AgNPs) to form RPal/AgNPs and OPal/AgNPs antibacterial nanocomposites. The structural and morphological characterizations were used to confirm the dispersion uniformity of AgNPs on the RPal and OPal nanorods, and antibacterial experiments were conducted to evaluate the performance of as-prepared composites and also investigate their antibacterial mechanism. The results showed that OPal-48h (OA leaching for 48 h) loaded with AgNPs (OPal-48h/AgNPs) possesses the most excellent and broad-spectrum antibacterial properties, where its minimum inhibitory concentration values against E. coli, S. aureus, ESBL-E. coli, and MRSA reached 0.25, 0.125, 0.25, and 0.5 mg/mL, respectively, which are mainly attributed to the optimal balance between surface activity and structural stability of OPal-48h that maximally increased its dispersibility and active sites, therefore contributing to the in situ formation of monodisperse AgNPs on the nanorods of OPal-48h.

Incorporation of Different Metal Ion for Tuning Color and Enhancing Antioxidant Activity of Curcumin/Palygorskite Hybrid Materials

Curcumin is one of the dietary dyes extracted from turmeric and used for prevention and treatment of various illnesses. However, the low bioavailability and poor stability of curcumin limits its relevant applications. Therefore, different metal ions including Cu²⁺, Zn²⁺, Mg²⁺, Al³⁺, or Fe³⁺ were incorporated to tune the color, enhance the environmental stability and antioxidant activity of curcumin in the presence of palygorskite in this study. The as-prepared samples were studied using X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Zeta potential, and transmission electron microscopy. In addition, the density functional theory calculation was also performed to explore the possible interaction among metal ions, curcumin and palygorskite. It was found that the color changing and stability enhancing were ascribed to the curcumin-metal ions coordination as well as chemical interactions between curcumin-metal complex and palygorskite. Moreover, the as-prepared composites showed more excellent color, thermal stability, antioxidant activity, and fluorescence properties than that of the curcumin/palygorskite composites due to the presence of metal ions. The finding of this investigation may contribute to developing the multifunctional composites with different colors and good antioxidant activity for relevant applications based on curcumin and palygorskite.

Effects of Geomaterial-Originated Fillers on Microstructure and Mechanical/Physical Properties of α- and β-Chitosan-Based Films

Edible films and coatings with good mechanical/physical properties are highly required for carrying medical substances and food packaging. So, solvent-cast films of α- or β-chitosan filled with palygorskite, montmorillonite or geopolymer-containing material (GCM), were prepared, and the effects of their clay contents (up to 50 wt.%) on the mechanical/physical properties were assessed. The microstructure of the films was investigated using FT-IR spectroscopy, SEM and thermal analysis. The results showed that, except for the films composed of GCM and β-chitosan, the mechanical properties of the films with limited (up to 5 wt.%) to moderate (5–25 wt.%) amounts of fillers increased as a result of the attractive electrostatic forces formed between the fillers and chitosan functional groups (–NH₃⁺, CH₂OH and NHCOCH₃). However, due to the occurrence of coarse aggregates, the strength of filler-rich films declined. The addition of fillers led to an increase in porosity and water absorption of the films, but it had irregular effects on their wettability and water vapor transmission rate. These observations as well as the thermal stability of the films were discussed in relation to the characterization results.

Palygorskite-Based Organic-Inorganic Hybrid Nanocomposite for Enhanced Antibacterial Activities

A synergistic antibacterial strategy is effective in enhancing the antibacterial efficacy of a single antibacterial material. Plant essential oils (PEOs) are safe antibacterial agents. However, some of their characteristics such as intense aroma, volatility, and poor thermal stability limit their antibacterial activity and applications. In this paper, five kinds of PEOs were incorporated onto ZnO/palygorskite (ZnO/PAL) nanoparticles by a simple adsorption process to form organic-inorganic nanocomposites (PEOs/ZnO/PAL) with excellent antibacterial properties. TEM and SEM analyses demonstrated that ZnO nanoparticles uniformly anchored onto the surface of rod-like PAL, and that the structure of ZnO/PAL maintained after the incorporation of ZnO nanoparticles and PEOs. It was found that carvacrol/ZnO/palygorskite (CAR/ZnO/PAL) exhibited higher antibacterial activities than other PEOs/ZnO/PAL nanocomposites, with minimum inhibitory concentration (MIC) values of 0.5 mg/mL and 1.5 mg/mL against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. Moreover, the antibacterial efficiency of CAR/ZnO/PAL nanocomposites was superior to that of ZnO/PAL and pure CAR, demonstrating the synergistic effect that occurs in the combined system. PAL serving as a carrier for the combination of organic PEOs and ZnO nanoparticles is an effective strategy for enhanced, clay-based, organic-inorganic hybrid antibacterial nanocomposites.

Raw and modified palygorskite in water treatment applications for low-concentration ammonium removal

Raw palygorskite (Pal) samples went under acid (H-Pal), NaCl (Na-Pal), and CaCl₂ treatment (Ca-Pal) in order to be examined as ammonium (NH₄ ⁺ ) sorbents from aqueous solutions. The samples were characterized by XRD and FT-IR techniques to examine potential structural differences after modifications, and batch kinetic experiment series were applied to determine the optimal conditions for NH₄ ⁺ removal. According to thermodynamic analysis, the removal reaction for sodium- and calcium-treated samples was endothermic (ΔΗ⁰  > 0, 1.65 kJ/mol and 24.66 kJ/mol, respectively), in contrast with the exothermic reactions of raw and acidic-treated palygorskite samples (ΔΗ⁰  < 0, -37.18 kJ/mol and -27.56 kJ/mol respectively). Moreover, each sample presented a different order of sorbed ions preference, whereas the strong affinity for Ca²⁺ sorption was common in all cases since the NH₄ ⁺ removal inhibited. Nevertheless, a similar pattern was followed for raw and modified samples at isotherm study, rendering the linear form of Freundlich isotherm to express better the NH₄ ⁺ sorption on palygorskite sample, indicating that it is a heterogeneous procedure. In all cases, the NH₄ ⁺ maximum uptake was within 15 min using 8 g/L of each sorbent, especially for the Na-Pal sample, which could reach almost 100% removal of low concentration NH₄ ⁺ . PRACTITIONER POINTS: Modified palygorskite samples were tested for NH₄ ⁺ removal from aqueous solutions. NaCl-treated palygorskite had the higher removal efficiency, which could reach almost 100% removal of low concentration NH₄ ⁺ . NH₄ ⁺ maximum uptake was within 15 minutes using 8 g/L of each sorbent. NH₄ ⁺ adsorption was an endothermic reaction for NaCl- and CaCl₂ -treated palygorskite sorbents. NH₄ ⁺ adsorption was an exothermic reaction for raw and acid-treated palygorskite sorbents.

Adsorption Behavior of Crystal Violet and Congo Red Dyes on Heat-Treated Brazilian Palygorskite: Kinetic, Isothermal and Thermodynamic Studies

The effect of heat treatment on the adsorptive capacity of a Brazilian palygorskite to remove the dyes crystal violet (CV) and congo red (CR) was investigated. The natural palygorskite was calcined at different temperatures (300, 500 and 700 °C) for 4 h. Changes in the palygorskite structure were evaluated using X-ray diffraction, X-ray fluorescence, thermogravimetric and differential thermal analysis, N₂ adsorption/desorption and Fourier transform infrared spectroscopy. The adsorption efficiency of CV and CR was investigated through the effect of initial concentration, contact time, temperature, pH and dosage of adsorbent. The calcination increased the adsorption capacity of palygorskite, and the greatest adsorption capacity of CV and CR dyes occurred in the sample calcined at 700 °C (Pal-700T). The natural and calcined samples at 300 and 500 °C followed the Freundlich isothermal model, while the Pal-700T followed the Langmuir isothermal model. Adsorption kinetics results were well described by the Elovich model. Pal-700T showed better adsorption performance at basic pH, with removal greater than 98%, for both dyes. Pal-700T proved to be a great candidate for removing cationic and anionic dyes present in water.

Synergy Effect of Nano-Organic Palygorskite on the Properties of Star-Shaped SBS-Modified Asphalt

With the rapid development of economic construction, styrene-butadiene-styrene (SBS)-modified asphalt is being more and more widely used in highway engineering, but there are still many deficiencies in the process of its use. In order to further improve its performance for use, nano-organic palygorskite (A-Pal) and star-shaped SBS were compounded to obtain modified asphalt in this study. The high-temperature stability of SBS-modified asphalt was enhanced after incorporation with A-Pal for the high-temperature stability test by a dynamic shear rheometer. The A-Pal should improve the surface free energy and adhesion of SBS-modified asphalt by the water stability test analysis. The aging test shows that A-Pal can reduce the thermal oxygen decomposition of SBS and improve the anti-aging performance and the fatigue resistance of SBS-modified asphalt. A-Pal has a certain improvement effect on the low temperature performance of SBS-modified asphalt as shown by a low temperature crack resistance test. A-Pal-compounded SBS-modified asphalt features good storage stability in normal temperatures with the lowest critical compatibility temperature.

Preparation and application of pH-responsive composite hydrogel beads as potential delivery carrier candidates for controlled release of berberine hydrochloride

For improving the effective concentration of berberine hydrochloride (BH) in the gastrointestinal tract, a series of pH-responsive hydrogel beads were prepared based on carboxymethylstarch-g-poly (acrylic acid)/palygorskite/starch/sodium alginate (CMS-g-PAA/PGS/ST/SA) in the present work. The developed hydrogel beads were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TG). Effect of palygorskite (PGS) content on the swelling properties of hydrogel beads and BH cumulative release were discussed. The pH responsiveness of hydrogel beads was also investigated in different media. Results illustrated that swelling of hydrogel beads and BH cumulative release from hydrogel beads were obviously affected by PGS content. The swelling ratio and BH cumulative release of composite hydrogel beads remarkably slowed down with PGS content increasing in the range from 10 to 40 wt%. The composite hydrogel beads were pH-responsive. At pH 7.4, the swelling ratio and BH cumulative release from composite hydrogel beads were the fastest among the dissolution media of pH 1.2, pH 6.8 and pH 7.4. The BH cumulative release from hydrogel beads was related to the swelling and relaxation of composite hydrogel beads and could be fitted better by the Higuchi model. The obtained composite hydrogel beads could be potentially used for the development of BH pharmaceutical dosage forms.

Fabrication of Eco-Friendly Betanin Hybrid Materials Based on Palygorskite and Halloysite

Eco-friendly betanin/clay minerals hybrid materials with good stability were synthesized by combining with adsorption, grinding, and heating treatment using natural betanin extracted from beetroot and natural 2:1 type palygorskite or 1:1 type halloysite. After incorporation of clay minerals, the thermal stability and solvent resistance of natural betanin were obviously enhanced. Due to the difference in the structure of palygorskite and halloysite, betanin was mainly adsorbed on the outer surface of palygorskite or halloysite through hydrogen-bond interaction, but also part of them also entered into the lumen of Hal via electrostatic interaction. Compared with palygorskite, hybrid materials prepared with halloysite exhibited the better color performance, heating stability and solvent resistance due to the high loading content of betanin and shielding effect of lumen of halloysite.

Safety of Nanoclay/Spring Water Hydrogels: Assessment and Mobility of Hazardous Elements

The presence of impurities in medicinal products have to be controlled within safety limits from a pharmaceutical quality perspective. This matter is of special significance for those countries and regions where the directives, guidelines, or legislations, which prescribe the rules for the application of some products is quite selective or incomplete. Clay-based hydrogels are quite an example of this matter since they are topically administered, but, in some regions, they are not subjected to well-defined legal regulations. Since hydrogels establish an intimate contact with the skin, hazardous elements present in the ingredients could potentially be bioavailable and compromise their safety. The elemental composition and mobility of elements present in two hydrogels have been assessed. Sepiolite, palygorskite, and natural spring water were used as ingredients. The release of a particular element mainly depends on its position in the structure of the hydrogels, not only on its concentration in each ingredient. As a general trend, elements' mobility reduced with time. Among the most dangerous elements, whose presence in cosmetics is strictly forbidden by European legal regulations, As and Cd were mobile, although in very low amounts (0.1 and 0.2 μg/100 g of hydrogel, respectively). That is, assuming 100% bioavailability, the studied hydrogels would be completely safe at normal doses. Although there is no sufficient evidence to confirm that their presence is detrimental to hydrogels safety, legally speaking, their mobility could hinder the authorization of these hydrogels as medicines or cosmetics. In conclusion, the present study demonstrates that hydrogels prepared with sepiolite, palygorskite, and Alicún spring water could be topically applied without major intoxication risks.

Wound Healing Activity of Nanoclay/Spring Water Hydrogels

BACKGROUND

hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed.

METHODS

in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process.

RESULTS

all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control.

CONCLUSION

fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations.

Effect of Type and Concentration of Nanoclay on the Mechanical and Physicochemical Properties of Bis-GMA/TTEGDMA Dental Resins

Bis-GMA/TTEGDMA-based resin composites were prepared with two different types of nanoclays: an organically modified laminar clay (Cloisite® 30B, montmorillonite, MMT) and a microfibrous clay (palygorskite, PLG). Their physicochemical and mechanical properties were then determined. Both MMT and PLG nanoclays were added into monomer mixture (1:1 ratio) at different loading levels (0, 2, 4, 6, 8 and 10 wt.%), and the resulting composites were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and mechanical testing (bending and compressive properties). Thermal properties, depth of cure and water absorption were not greatly affected by the type of nanoclay, while the mechanical properties of dental resin composites depended on both the variety and concentration of nanoclay. In this regard, composites containing MMT displayed higher mechanical strength (both flexural and compression) than those resins prepared with PLG due to a poor nanoclay dispersion as revealed by SEM. Solubility of the composites was dependent not only on nanoclay-type but also the mineral concentration. Dental composites fulfilled the minimum depth cure and solubility criteria set by the ISO 4049 standard. In contrast, the minimum bending strength (50 MPa) established by the international standard was only satisfied by the dental resins containing MMT. Based on these results, composites containing either MMT or PLG (at low filler contents) are potentially suitable for use in dental restorative resins, although those prepared with MMT displayed better results.

Hydrothermal Fabrication of Spindle-Shaped ZnO/Palygorskite Nanocomposites Using Nonionic Surfactant for Enhancement of Antibacterial Activity

In order to improve the antibacterial performance of natural palygorskite, spindle-like ZnO/palygorskite (ZnO/PAL) nanocomposites with controllable growth of ZnO on the surface of PAL were prepared in the presence of non-ionic surfactants using an easy-to-operate hydrothermal method. The obtained ZnO/PAL nanocomposites have a novel and special spindle-shaped structure and good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and are also low cost. The minimum inhibitory concentrations of ZnO/PAL nanocomposites toward E. coli and S. aureus reached 1.5 and 5 mg/mL, respectively.

Palygorskite Supplementation Improves Growth Performance, Oxidative Status, and Intestinal Barrier Function in Cherry Valley Ducks

The effects of dietary palygorskite (Pal) supplementation on growth performance, oxidative status, and intestinal barrier function in ducks were investigated. In total, 720 one-day-old Cherry Valley ducks were categorized into 4 treatments comprising 6 replicates with 30 ducks each. Ducks were fed a basal diet supplemented with 0, 5, 10, or 20 g/kg Pal for 42 days. Twenty-four ducks (1 male/replicate) were slaughtered at 14 and 42 days and samples were collected for analysis. Pal supplementation quadratically increased weight gain and linearly and quadratically increased feed intake (P<0.05) during the starter period. Pal enhanced serum glutathione peroxidase activity (GSHPx) at 14 (linear and quadratic, P<0.05) and 42 days (linear, P<0.001), and lowered serum malondialdehyde (MDA) content at 14 and 42 days (quadratic, P<0.05). It enhanced 42-day liver superoxide dismutase activity (linear, P=0.003) and GSH-Px activity at 14 (quadratic, P=0.044) and 42 days (linear and quadratic, P<0.001), but decreased 14-day liver MDA content (quadratic, P=0.003). Pal reduced 42-day serum diamine oxidase activity (linear and quadratic, P<0.05) and serum endotoxin content at 14 (linear and quadratic, P<0.05) and 42 days (quadratic, P=0.017). It linearly and quadratically increased jejunal mucosal immunoglobulin (Ig) M at 42 days and IgG at 14 and 42 days, and 42-day ileal mucosal IgG and secretory IgA (P<0.05). Ileal mucosal IgM content was quadratically increased at 14 and 42 days (P<0.05) by Pal. Moreover, Pal enhanced the mRNA expression of 14-day occludin in the jejunal mucosa (quadratic, P=0.033) and that of 42-day zonula occludens-1 in the ileal mucosa (linear, P=0.027). Thus, dietary Pal supplementation exerts beneficial effects through improving growth performance, antioxidant capacity, and intestinal barrier function of ducks.

Thermal Decomposition of Maya Blue: Extraction of Indigo Thermal Decomposition Steps from a Multistep Heterogeneous Reaction Using a Kinetic Deconvolution Analysis

Examining the kinetics of solids’ thermal decomposition with multiple overlapping steps is of growing interest in many fields, including materials science and engineering. Despite the difficulty of describing the kinetics for complex reaction processes constrained by physico-geometrical features, the kinetic deconvolution analysis (KDA) based on a cumulative kinetic equation is one practical method of obtaining the fundamental information needed to interpret detailed kinetic features. This article reports the application of KDA to thermal decomposition of clay minerals and indigo–clay mineral hybrid compounds, known as Maya blue, from ancient Mayan civilization. Maya blue samples were prepared by heating solid mixtures of indigo and clay minerals (palygorskite and sepiolite), followed by purification. The multistep thermal decomposition processes of the clay minerals and Maya blue samples were analyzed kinetically in a stepwise manner through preliminary kinetic analyses based on a conventional isoconversional method and mathematical peak deconvolution to finally attain the KDA. By comparing the results of KDA for the thermal decomposition processes of the clay minerals and the Maya blue samples, information about the thermal decomposition steps of the indigo incorporated into the Maya blue samples was extracted. The thermal stability of Maya blue samples was interpreted through the kinetic characterization of the extracted indigo decomposition steps.

Preparation of PVDF/Hyperbranched-Nano-Palygorskite Composite Membrane for Efficient Removal of Heavy Metal Ions

In this work, three kinds of hyperbranched polyamidoamine-palygorskite (PAMAM-Pal) were designed and synthesized by grafting the first generation polyamidoamine (G1.0 PAMAM), G2.0 PAMAM and G3.0 PAMAM onto Pal surfaces, respectively. Then, these PAMAM-Pals were used as additives to prepare polyvinylidene fluoride (PVDF)/hyperbranched polyamidoamine-palygorskite bicomponent composite membranes. The structures of the composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TEM), X-ray photoelectron spectroscopy (XPS), field-emission scanning electronmicroscopy (SEM), atomic force microscope (AFM) and Thermogravimetric analysis (TGA). The adsorption properties of composite membranes to heavy metal ions was studied, and the results found that the maximum adsorption capacities for Cu(II), Ni(II) and Cd(II) could reach 155.19 mg/g, 124.28 mg/g and 125.55 mg/g, respectively, for the PVDF/G3.0 PAMAM-Pal membrane, while only 23.70 mg/g, 17.74 mg/g and 14.87 mg/g could be obtained for unmodified membranes in the same conditions. The high adsorption capacity can be ascribed to the large number of amine-terminated groups, amide groups and carbonyl groups of the composite membrane. The above results indicated that the prepared composite membrane has a high adsorption capacity for heavy metal ions removal in water treatment.

Effect of Natural Nanostructured Rods and Platelets on Mechanical and Water Resistance Properties of Alginate-Based Nanocomposites

A series of biopolymer-based nanocomposite films were prepared by incorporating natural one-dimensional (1D) palygorskite (PAL) nanorods, and two-dimensional (2D) montmorillonite (MMT) nanoplatelets into sodium alginate (SA) film by a simple solution casting method. The effect of different dimensions of nanoclays on the mechanical, water resistance, and light transmission properties of the SA/PAL or MMT nanocomposite films were studied. The field-emission scanning electron microscopy (FE-SEM) result showed that PAL can disperse better than MMT in the SA matrix in the case of the same addition amount. The incorporation of both PAL and MMT into the SA film can enhance the tensile strength (TS) and water resistance capability of the film. At a high content of nanoclays, the SA/PAL nanocomposite film shows relatively higher TS, and better water resistance than the SA/MMT nanocomposite film. The SA/MMT nanocomposite films have better light transmission than SA/PAL nanocomposite film at the same loading amount of nanoclays. These results demonstrated that 1D PAL nanorods are more suitable candidate of inorganic filler to improve the mechanical and water resistance properties of biopolymers/nanoclays nanocomposites.

Palygorskite Supported AuPd Alloy Nanoparticles as Efficient Nano-Catalysts for the Reduction of Nitroarenes and Dyes at Room Temperature

In this work, AuPd alloy palygorskite based Pal-NH₂@AuPd nano-catalysts were prepared and used as catalysts for the reduction of nitroarenes and dyes at room temperature. The surface of palygorskite (Pal) was first modified with 3-aminpropyltriethoxysilane, and then covered with AuPd alloy nanoparticles through co-reduction of HAuCl₄ and K₂PdCl₄. The morphology and structures of the Pal-NH₂@AuPd nano-catalysts were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). The as-synthesized Pal-NH₂@AuPd nano-catalysts displayed excellent catalytic performance in reducing 4-nitrophenol (4-NP) and various other nitroaromatic compounds. Moreover, the catalytic activities of the Pal-NH₂@AuPd nano-catalysts were adjustable via changing the atomic ratio of AuPd alloy nanoparticles, leading to the Pal-NH₂@Au₄₈Pd₅₂ component as having the best atomic ratio. The Pal-NH₂@Au₄₈Pd₅₂ continued to display good catalytic stability after being reused for several cycles and there were no obvious changes, either of the morphology or the particle size distribution of the nano-catalysts. Furthermore, these Pal-NH₂@Au₄₈Pd₅₂ nano-catalysts also provided a convenient and accessible way for the degradation of dyes in artificial industrial wastewater.

PVDF/Palygorskite Nanowire Composite Electrolyte for 4 V Rechargeable Lithium Batteries with High Energy Density

Solid electrolytes are crucial for the development of solid state batteries. Among different types of solid electrolytes, poly(ethylene oxide) (PEO)-based polymer electrolytes have attracted extensive attention owing to their excellent flexibility and easiness for processing. However, their relatively low ionic conductivities and electrochemical instability above 4 V limit their applications in batteries with high energy density. Herein, we prepared poly(vinylidene fluoride) (PVDF) polymer electrolytes with an organic plasticizer, which possesses compatibility with 4 V cathode and high ionic conductivity (1.2 × 10^-4 S/cm) at room temperature. We also revealed the importance of plasticizer content to the ionic conductivity. To address weak mechanical strength of the PVDF electrolyte with plasticizer, we introduced palygorskite ((Mg,Al)₂Si₄O₁₀(OH)) nanowires as a new ceramic filler to form composite solid electrolytes (CPE), which greatly enhances both stiffness and toughness of PVDF-based polymer electrolyte. With 5 wt % of palygorskite nanowires, not only does the elastic modulus of PVDF CPE increase from 9.0 to 96 MPa but also its yield stress is enhanced by 200%. Moreover, numerical modeling uncovers that the strong nanowire-polymer interaction and cross-linking network of nanowires are responsible for such significant enhancement in mechanically robustness. The addition of 5% palygorskite nanowires also enhances transference number of Li⁺ from 0.21 to 0.54 due to interaction between palygorskite and ClO₄^- ions. We further demonstrate full cells based on Li(Ni_1/3Mn_1/3Co_1/3)O₂ (NMC111) cathode, PVDF/palygorskite CPE, and lithium anode, which can be cycled over 200 times at 0.3 C, with 97% capacity retention. Moreover, the PVDF matrix is much less flammable than PEO electrolytes. Our work illustrates that the PVDF/palygorskite CPE is a promising electrolyte for solid state batteries.

Mechanically Robust and Thermally Stable Colorful Superamphiphobic Coatings

Colorful super anti-wetting coatings are receiving growing attention, but are challenging to invent. Here, we report a general method for preparing mechanically robust and thermally stable colorful superamphiphobic coatings. A composite of palygorskite (PAL) nanorods and iron oxide red (IOR) was prepared by solid-state grinding or hydrothermal reaction, which was then modified by hydrolytic condensation of silanes to form a suspension. Superamphiphobic coatings were prepared by spray-coating the suspension onto substrates. The superamphiphobicity depends upon the surface microstructure and chemical composition, which are controllable by the PAL/IOR concentration and the solid-state grinding time. The colorful coatings show excellent superamphiphobicity with high contact angles and low sliding angles for water and various organic liquids of low surface tension, e.g., toluene and n-decane. The coatings also feature high mechanical, chemical and thermal stability, which is superior to all the reported colorful super anti-wetting coatings. Moreover, superamphiphobic coatings of different colors can be prepared via the same procedure using the other metal oxides instead of IOR. We believe the colorful superamphiphobic coatings may find applications in many fields like anti-climbing of oils and restoration of cultural relics, as the coatings are applicable onto various substrates.

Preparation of 1D Hierarchical Material Mesosilica/Pal Composite and Its Performance in the Adsorption of Methyl Orange

This paper highlights the synthesis of a one-dimensional (1D) hierarchical material mesosilica/palygorskite (Pal) composite and evaluates its adsorption performance for anionic dye methyl orange (MO) in comparison with Pal and Mobile crystalline material-41 (MCM-41). The Mesosilica/Pal composite is consisted of mesosilica coated Pal nanorods and prepared through a dual template approach using cetyltrimethyl ammonium bromide (CTAB) and Pal as soft and hard templates, respectively. The composition and structure of the resultant material was characterized by a scanning electron microscope (SEM), transmissionelectron microscopy (TEM), N₂ adsorption-desorption analysis, small-angle X-Ray powder diffraction (XRD), and zeta potential measurement. Adsorption experiments were carried out with different absorbents at different contact times and pH levels. Compared with Pal and MCM-41, the mesosilica/Pal composite exhibited the best efficiency for MO adsorption. Its adsorption ratio is as high as 70.4%. Its adsorption equilibrium time is as short as 30 min. Results testify that the MO retention is promoted for the micro-mesoporous hierarchical structure and positive surface charge electrostatic interactions of the mesosilica/Pal composite. The regenerability of the mesosilica/Pal composite absorbent was also assessed. 1D morphology makes it facile to separate from aqueous solutions. It can be effortlessly recovered and reused for up to nine cycles.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

A series of superporous carboxymethylcellulose-graft-poly(acrylamide)/palygorskite (CMC-g-PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Palygorskite changes heavy metal bioavailability and microbial functional diversity in sewage sludge composting

To investigate the effects of palygorskite on chemical forms of heavy metal and microbial functional diversity in the sewage sludge composting, a compost matrix of sewage sludge, wheat straw and varying contents of palygorskite were inoculated with the compound microbial preparation. The chemical speciation analysis by a Community Bureau of Reference-sequential extraction indicated the contribution of palygorskite to reduce the bioavailability of a model metal, Cu, during the composting process. The Biolog EcoPlate(TM) test revealed that the microbial community showed better capability of utilizing complex macro-molecules (such as miscellaneous and polymers) in the presence of palygorskite. Increasing the palygorskite contents from 1% to 5%, the microbial activity showed an increasing tendency. However, continuously increasing the palygorskite resulted in a decline of the microbial metabolism. Therefore, appropriate content of palygorskite is an ideal additive for composting, not only enhancing the microbial activity, but also reducing the metal toxicity.