Ethylcellulose Oleogels: Structure, Functionality, and Food Applications

Development and Characterization of Ethylcellulose Oleogels Based on Pumpkin Seed Oil and Rapeseed Oil

In contrast to rapeseed oil, pumpkin seed oil has yet to be well investigated in terms of oleogelation, and, to the best of our knowledge, no study related to the use of ethylcellulose (EC) in the structuring of this oil has been identified in the current scientific literature. Therefore, the present study evaluated several oleogels formulated with EC as the oleogelator in different concentrations of 7% (OG7) and 9% (OG9), based on cold-pressed pumpkin seed oil (PO) and refined rapeseed oil (RO), as well as on mixtures of the two oils in different combinations: PO:RO (3:1) (PRO) and PO:RO (1:1) (RPO). Physicochemical properties such as visual appearance, gel formation time (GFT), oil-binding capacity (OBC), oxidative and thermal stability, and textural characteristics were analyzed. Analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) were used in the statistical analysis of the data, with a significance level of p < 0.05. EC proved to be an effective structuring agent of the mentioned edible oils; the type of oils and the concentration of oleogelator significantly influenced the characteristics of the obtained oleogels. The 9% EC oleogels exhibited a more rigid structure, with a higher OBC and a reduced GFT. Pumpkin seed oil led to more stable oleogels, while the mixture of pumpkin seed oil with rapeseed oil caused a significant reduction in their mechanical properties and decreased the OBC. After 14 days of storage, all oleogels demonstrated proper oxidative stability within the bounds set by international regulations for edible fats, regardless of the kind of oil and EC concentration. All of the oleogels showed a higher oxidative stability than the oils utilized in their formulation; however, those prepared with cold-pressed pumpkin seed oil indicated a lower level of lipid oxidation among all oleogels. The P-OG9 and PR-OG9 oleogels, which mainly included PO and contained 9% EC, demonstrated the optimum levels of quality in texture, GFT, OBC, and oxidative stability.

Bioconjugation of Vegetable Oils with UV Absorbers: New Approach in Skin Photoprotection

We reported the tunable synthesis of new vegetable oil-UV filter bioconjugates using sea buckthorn oil (SBO) and p-methoxycinnamic acid (p-MCA) as an alternative to the common UV filter, ethylhexyl-p-methoxycinnamate (octinoxate). The synthetic strategy is based on the sustainable ring-opening reaction of epoxidized SBO with p-MCA in heterogenous catalysis in eco-friendly solvents. The amount of UV-absorptive moieties grafted on the triglyceride backbone is controlled by different epoxidation degrees as determined by NMR spectroscopy. The performance of the new UV-absorber bioconjugates was assessed by in vitro sun protection factor (SPF) measurements after inclusion in SBO-ethylcellulose (EC) oleogels and comparison with the SPF value of the SBO-EC-octinoxate oleogel with equivalent p-MCA acid moieties (10% wt/wt). The concentration obtained for the SBO-EC oleogel formulated with the bioconjugate with the lowest degree of functionalization, namely 55%, represents 45% of the SPF determined for the SBO-EC-octinoxate oleogel, regardless of the concentration of measured solutions. The new concept of vegetable oil-UV-absorber bioconjugates has potential UV-B photoprotective properties when included in oleogel formulations and deserves further investigation of their properties and stability including association with UV-A absorbers, respectively.

Development and Comparative Evaluation of Ciprofloxacin Nanoemulsion-Loaded Bigels Prepared Using Different Ratios of Oleogel to Hydrogels

Nanoemulsions and bigels are biphasic delivery systems that can be used for topical applications. The aim of this study was to incorporate an oil-in-water ciprofloxacin hydrochloride nanoemulsion (CIP.HCl NE) into two types of bigels, Type I (oleogel (OL)-in-hydrogel (WH)) and Type II (WH-in-OL) to enhance drug penetration into skin and treat topical bacterial infections. Bigels were prepared at various ratios of OL and WH (1:1, 1:2, and 1:4). Initially, CIP.HCl NE was prepared and characterized in terms of droplet size, zeta potential, polydispersity index, morphology, and thermodynamic and chemical stability. Then CIP.HCl NE was dispersed into the OL or WH phase of the bigel. The primary physical stability studies showed that Type I bigels were physically stable, showing no phase separation. Whereas Type II bigels were physically unstable, hence excluded from the study. Type I bigels were subjected to microstructural, rheological, in vitro release, antimicrobial, and stability studies. The microscopic images showed a highly structured bigel network with nanoemulsion droplets dispersed within the bigel network. Additionally, bigels exhibited pseudoplastic flow and viscoelastic properties. A complete drug release was achieved after 4-5 h. The in vitro and ex vivo antimicrobial studies revealed that bigels exhibited antimicrobial activity against different bacterial strains. Moreover, stability studies showed that the rheological properties and physical and chemical stability varied based on the bigel composition over three months. Therefore, the physicochemical and rheological properties, drug release rate, and antimicrobial activity of Type I bigels could be modified by altering the OL to WH ratio and the phase in which the nanoemulsion dispersed in.

Effects of vegetable oil and ethylcellulose on the oleogel properties and its application in Harbin red sausage

The effects of ethylcellulose (EC) concentration (6-12 %) and types of vegetable oil (sunflower, peanut, corn, and flaxseed oils) on the color, hardness, oil loss, lipid oxidation, and rheology property of oleogels were investigated in this study. Peanut oil (PO) oleogel was selected to replace pork fat partially in Harbin red sausage. Meanwhile, the fatty acid profile, texture, and sensory attributes of the reformulated sausages were analyzed. Oleogels formulated with higher EC concentration had higher brightness and hardness, a higher degree of lipid oxidation, and greater storage (G') and loss (G'') moduli. Oleogels formulated with PO had lower oil loss, flaxseed oil oleogel had higher hardness. Corn oil and PO oleogels had a lower level of lipid oxidation. The texture, lipid oxidation, and sensory attributes of the reformulated sausages, in which 10-30 % pork fat was replaced with PO oleogel, did not significantly differ from those without oleogel replacement. Meanwhile, the reformulated sausages had a healthier fatty acids profile and higher nutritional value.

Ethylcellulose-stabilized fat-tissue phantom for quality assurance in clinical hyperthermia

BACKGROUND

Phantoms accurately mimicking the electromagnetic and thermal properties of human tissues are essential for the development, characterization, and quality assurance (QA) of clinically used equipment for Hyperthermia Treatment (HT). Currently, a viable recipe for a fat equivalent phantom is not available, mainly due to challenges in the fabrication process and fast deterioration.

MATERIALS AND METHODS

We propose to employ a glycerol-in-oil emulsion stabilized with ethylcellulose to develop a fat-mimicking material. The dielectric, rheological, and thermal properties of the phantom have been assessed by state-of-the-art measurement techniques. The full-size phantom was then verified in compliance with QA guidelines for superficial HT, both numerically and experimentally, considering the properties variability.

RESULTS

Dielectric and thermal properties were proven equivalent to fat tissue, with an acceptable variability, in the 8 MHz to 1 GHz range. The rheology measurements highlighted enhanced mechanical stability over a large temperature range. Both numerical and experimental evaluations proved the suitability of the phantom for QA procedures. The impact of the dielectric property variations on the temperature distribution has been numerically proven to be limited (around 5%), even if higher for capacitive devices (up to 20%).

CONCLUSIONS

The proposed fat-mimicking phantom is a good candidate for hyperthermia technology assessment processes, adequately representing both dielectric and thermal properties of the human fat tissue while maintaining structural stability even at elevated temperatures. However, further experimental investigations on capacitive heating devices are necessary to better assess the impact of the low electrical conductivity values on the thermal distribution.

Conversion of Pulse Protein Foam-Templated Oleogels into Oleofoams for Improved Baking Application

The food industry has long been searching for an efficient replacement for saturated-fatty-acid-rich fats for baking applications. Although oleogels have been considered a potential alternative for saturated and trans fats, their success in food application has been poor. The present study explored the use of oleofoams obtained by whipping the pulse protein foam-templated oleogels for cake baking. Oleogels were prepared at room temperature by adding canola oil containing high-melting monoglyceride (MAG) or candelilla wax (CW) to the freeze-dried pea or faba bean protein-stabilized foams. Oleogels were then whipped to create the oleofoams; however, only the oleogels containing MAG could form oleofoams. CW-oleogel could not form any oleofoam. The most stable oleofoams with the highest overrun, stability, and storage modulus were obtained from 3% MAG+pulse protein foam-templated oleogels. The MAG plus protein foam-templated oleogels showed smaller and more packed air bubbles than MAG-only oleofoam, which was ascribed to the protein's ability to stabilize air bubbles and provide a network in the continuous oil phase to restrict air bubble movement. A novel batter preparation method for oleofoam was developed to increase air bubble incorporation. The X-ray microtomography images of the cakes showed a non-homogeneous distribution of larger air bubbles in the oleofoam cake compared to the shortening cake although their total porosity was not much different. The oleofoam cakes made with the new method yielded similar hardness and chewiness compared to the shortening cakes. By improving rheology and increasing air incorporation in the batter, high-quality cakes can be obtained with MAG-containing oleofoams made from pulse protein foam-templated oleogels.

Electrospun lignin-PVP nanofibers and their ability for structuring oil

This work explores the electrospinnability of low-sulfonate Kraft lignin (LSL)/polyvinylpyrrolidone (PVP) solutions in N,N-dimethylformamide (DMF) and the ability of the different micro- and nano-architectures generated to structure castor oil. LSL/PVP solutions were prepared at different concentrations (8-15 wt%) and LSL:PVP ratios (90:10-0:100) and physico-chemically and rheologically characterized. The morphology of electrospun nanostructures mainly depends on the rheological properties of the solution. Electrosprayed nanoparticles or micro-sized particles connected by thin filaments were obtained from solutions with low LSL/PVP concentrations and/or high LSL:PVP ratios, whereas beaded or bead-free nanofibers were produced by increasing concentration and/or decreasing LSL:PVP ratio, due to enhanced extensional viscoelastic properties and non-Newtonian characteristics. Electrospun LSL/PVP nanofibers are able to form oleogels by simply dispersing them into castor oil at concentrations between 10 and 30 wt%. The rheological properties of the oleogels may be tailored by modifying the LSL:PVP ratio and nanofibers content. The potential application of these oleogels as bio-based lubricants was also explored in a tribological cell. Satisfactory friction and wear results are achieved when using oleogels structured by nanofibers mats with enhanced gel-like properties as lubricants. Overall, electrospinning of lignin/PVP solutions can be proposed as a simple and effective method to produce nanofibers for oil structuring.

Ethyl cellulose particles loaded with α-tocopherol for inhibiting thermal oxidation of soybean oil

Most endogenous antioxidants degrade and lose efficiency during frying. The study aimed to inhibit thermal oxidation of soybean oil by fabricating α-tocopherol loaded particles with ethyl cellulose (EC) of different viscosity grades (M9, M70 and M200) via anti-solvent method. As the viscosity of ethyl cellulose increased, particle size decreased from micrometer to nanometer. Confocal laser scanning microscope confirmed successful encapsulation and uniform distribution of α-tocopherol in the loaded particles. Differential scanning calorimetry and thermogravimetric analysis demonstrated that loaded particles protected α-tocopherol from oxidation and degradation. Meanwhile, Fourier transformed infrared demonstrated that α-tocopherol interacted with EC through hydrogen bond and hydrophobic effects. With excellent dispersibility in soybean oil, loaded particles effectively inhibited thermal oxidation of soybean oil and loaded M200 nanoparticles was the most effective, which performed far better than tert-butylhydroquinone (TBHQ). Therefore, the nanoparticles offered a promising way to enhance oxidative stability of oils during thermal processing.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.