Interaction of nanoclay-reinforced packaging nanocomposites with food simulants and compost environments

MIL-101(Fe)@ceramic-monolith for arsenic removal in aqueous solutions

In this work, we present the preparation of a hybrid material constituted by a Metal-Organic Framework (type MIL-101(Fe)) and a natural clay ceramic monolith (NCCM), the materials were successfully assembled through an in-situ hydrothermal method. The composites were characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), N2 adsorption-desorption isotherms at 77 K and CO2 adsorption at 273 K; these techniques confirmed the obtaining of the hybrid material and, in addition, through studies before and after adsorption mechanisms involved were identified. Then, the As(V) adsorption capacity of the materials was evaluated using an aqueous arsenic solution; from which high adsorption capacities of up to 268 mg g- 1 and 61.5 mg g- 1, respectively. In addition, kinetic and equilibrium studies of As(V) adsorption were carried out. Finally, the potential capacities of the hybrid material consisting of Al2O3, AlO6-SiO4 and Fe3O4 for the adsorption of H3AsO4, were studied through density functional theory calculations.

Hygroscopic Growth of Adsorbed Water Films on Smectite Clay Particles

Hygroscopic growth of adsorbed water films on clay particles underlies a number of environmental science questions, from the air quality and climate impacts of mineral dust aerosols to the hydrology and mechanics of unsaturated soils and sedimentary rocks. Here, we use molecular dynamics (MD) simulations to establish the relation between adsorbed water film thickness (h) and relative humidity (RH) or disjoining pressure (Π), which has long been uncertain due to factors including sensitivity to particle shape, surface roughness, and aqueous chemistry. We present a new MD simulation approach that enables precise quantification of Π in films up to six water monolayers thick. We find that the hygroscopicity of phyllosilicate mineral surfaces increases in the order mica < K-smectite < Na-smectite. The relationship between Π and h on clay surfaces follows a double exponential decay with e-folding lengths of 2.3 and 7.5 Å. The two decay length scales are attributed to hydration repulsion and osmotic phenomena in the electrical double layer (EDL) at the clay-water interface.

Nanoclays-containing bio-based packaging materials: properties, applications, safety, and regulatory issues

Food packaging is an important concept for consumer satisfaction and the increased shelf life of food products. The introduction of novel food packaging materials has become an emerging trend in recent years, which could be mainly due to environmental pollution caused by plastic packaging and to reduce food waste. Recently, numerous studies have been carried out on nanoclays or nanolayered silicate to be used in packaging material development as reinforcing filler composites. Different types of nanoclays have been used as food packaging materials, while montmorillonite (MMT), halloysite, bentonite (BT), Cloisite, and organically modified nanoclays have become of great interest. The incorporation of nanoclays into the packaging matrix improves the mechanical and barrier properties and at the same time prolongs the biodegradation of the packaging material. The purpose of this article is to examine the development of nanoclay-based food packaging materials. The review article highlights the current state of research on bio-based polymers with nanoclay for food packaging. In addition, the report analyses the mechanical, barrier, and antibacterial characteristics of nanoclay-based food packaging materials. Finally, it discusses the migration of nanoclays, toxicity levels, and the legislation associated with the application of nanoclays.

Graphical abstract

Increased shelf life of Oncorhynchus mykiss (Rainbow trout) through Cu-Clay nanocomposites

Microbial growth is widely responsible for shortened shelf life of cold water-living fish products. So, it seems that current chemical-based food packaging has no acceptable efficacy, and food industrialists tend to the usage of more novel approaches like active food packaging. Among them, there is a great research interest in nanotechnology-emerging approaches. This study aimed to investigate the anti-microbial efficacies of Polyethylene/CuNP/nanoclay nanocomposites to enhance the shelf life and physiochemical features of rainbow trout. Three main nanocomposites with various concentrations of Cu and clay nanoparticles were examined. SEM, XRD, and EDX (as physiochemical analysis), disk diffusion (as antimicrobial assays), total volatile nitrogen (TVB-N), and peroxide value (PV) (as biochemical parameters) were measured. Based on the results, nanocomposites could reduce the microorganism growth rate by reducing the number of colonies (33.3%), inhibitory activities against both gram-positive (8 mm) and gram-negative bacteria (10 mm), maintenance of TVB-N (42% reduction), and PV (44% reduction) below the standard range. To sum up, these new nanocomposites can be a good candidate to enhance the shelf life of Rainbow Trout.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01031-0.

Effect of Organic Modifier Types on the Physical-Mechanical Properties and Overall Migration of Post-Consumer Polypropylene/Clay Nanocomposites for Food Packaging

The deterioration of the physical-mechanical properties and loss of the chemical safety of plastics after consumption are topics of concern for food packaging applications. Incorporating nanoclays is an alternative to improve the performance of recycled plastics. However, properties and overall migration from polymer/clay nanocomposites to food require to be evaluated case-by-case. This work aimed to investigate the effect of organic modifier types of clays on the structural, thermal and mechanical properties and the overall migration of nanocomposites based on 50/50 virgin and recycled post-consumer polypropylene blend (VPP/RPP) and organoclays for food packaging applications. The clay with the most hydrophobic organic modifier caused higher thermal stability of the nanocomposites and greater intercalation of polypropylene between clay mineral layers but increased the overall migration to a fatty food simulant. This migration value was higher from the 50/50 VPP/RPP film than from VPP. Nonetheless, clays reduced the migration and even more when the clay had greater hydrophilicity because of lower interactions between the nanocomposite and the fatty simulant. Conversely, nanocomposites and VPP/RPP control films exhibited low migration values in the acid and non-acid food simulants. Regarding tensile parameters, elongation at break values of PP film significantly increased with RPP addition, but the incorporation of organoclays reduced its ductility to values closer to the VPP.