Development of an oxidative dehydrogenation-based fluorescent probe for Cu2+ and its biological imaging in living cells

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

A highly selective and sensitive ICT-based Cu2+ fluorescent probe and its application in bioimaging

Cu²⁺ is an essential trace element for the organism, but its excess can also cause irreversible damage to the organism. As such, a "Turn-Off" fluorescent probe DPAP for the specific detection of Cu²⁺ was successfully constructed. DPAP exhibits large Stokes shift (120 nm), fast reaction speed (1 min), low detection limit (15.2 nM), low toxicity, and good cell permeability. Cu²⁺ quenches the fluorescence of DPAP by blocking its intramolecular charge transfer process to achieve the detection of Cu²⁺ and has been confirmed by HRMS, ¹H NMR and DFT calculations. Excitingly, the five-cycle detection of Cu²⁺ and the successful recovery of trace Cu²⁺ in environmental water samples fully demonstrate the potential of DPAP for practical applications. In particular, DPAP can observe the distribution and translocation patterns of exogenous Cu²⁺ in HeLa cells and zebrafish in real-time. This research concept has offered important theoretical support for the study of the environmental behavior of heavy metal ions.

Photoinduced electron transfer (PeT) based fluorescent probes for cellular imaging and disease therapy

Typical PeT-based fluorescent probes are multi-component systems where a fluorophore is connected to a recognition/activating group by an unconjugated linker. PeT-based fluorescent probes are powerful tools for cell imaging and disease diagnosis due to their low fluorescence background and significant fluorescence enhancement towards the target. This review provides research progress towards PeT-based fluorescent probes that target cell polarity, pH and biological species (reactive oxygen species, biothiols, biomacromolecules, etc.) over the last five years. In particular, we emphasise the molecular design strategies, mechanisms, and application of these probes. As such, this review aims to provide guidance and to enable researchers to develop new and improved PeT-based fluorescent probes, as well as promoting the use of PeT-based systems for sensing, imaging, and disease therapy.

An aggregation-induced emissive pyridoxal derived tetradentate Schiff base for the fluorescence turn-off sensing of copper(ii) in an aqueous medium

An aggregation-induced emissive pyridoxal derived tetradentate Schiff base was developed for the fluorescence sensing of copper(ii) and sulphide ions.

Chitosan based macromolecular probes for the selective detection and removal of Fe3+ ion

Chitosan has been widely used due to its biodegradable, cost-effective and environmentally friendly properties. Modification of chitosan attracts much attention as promising methods to detect and remove organic and inorganic pollutants. In this work, chitosan-based macromolecular probes were designed and synthesized. The probes can detect Fe³⁺ in the presence of other metal ions. The detection mechanism is investigated as well. The probe's fluorescence quenching upon the addition of Fe³⁺ ion could be ascribed to the complexation between the electron-deficient ion Fe³⁺ and "C=N" (electron-rich group) of fluorescent chitosan probes. What's more, the obtained fluorescent macromolecular probes can be used for the removal of Fe³⁺ in solution. The probes could adsorb the Fe³⁺ in solution and the removal efficiency can reach as high as 62.0% while the removal efficiency of original chitosan is only 16.0%. The probes have good selective detection for Fe³⁺ and the detection limit reaches 1.2 μM.

Sensitive and Visual Detection of Phosgene by a TICT-Based BODIPY Dye with 8-(o-Hydroxy)aniline as the Active Site

Phosgene and its substitutes (diphosgene and triphosgene) are widely utilized as chemical industrial materials and chemical warfare agents and pose a threat to public health and environmental safety due to their extreme toxicity. Research efforts have been directed to develop selective and sensitive detection methods for phosgene and its substitutes. In this paper, we have prepared two BODIPY-based fluorescent probes, o-Pah and o-Pha, which are two isomers with different active sites, ortho-aminohydroxy (3',4' or 4',3') phenyls at meso position of BODIPY, and compared their sensing performance toward triphosgene. The probe with o-(4'-amino-3'-hydroxyl), o-Pha, exhibits better sensing performance over the o-(3'-amino-4'-hydroxyl), o-Pah, for instance, a lower limit of detection (LOD) (0.34 nm vs. 1.2 nm), and more rapid response (10 s vs. 200 s). Furthermore, based on the above comparative studies, a red-fluorescence probe o-Phae has been constructed through extending 3,5-conjugation of o-Pha. The probe o-Phae displays rapid response (60 s), high sensitivity to triphosgene (LOD=0.88 nm), and high selectivity for triphosgene over relevant analytes including nitric oxide. Finally, a facile test strip for phosgene was fabricated by immobilizing o-Phae in a polyethylene oxide membrane for sensitive (<2 ppm) and selective detection of phosgene in the gas phase.

Activity-Based Sensing and Theranostic Probes Based on Photoinduced Electron Transfer

Fluorescent probes have become powerful tools in detection, imaging and disease diagnosis due to their high sensitivity, specificity, fast response, and technical simplicity. In the last decades, researchers have made remarkable progress in developing signaling mechanisms to design fluorescent probes such as photoinduced electron transfer (PET), intramolecular charge transfer (ICT), and fluorescence resonance energy transfer (FRET). Typical PET is composed of a multicomponent system in which a fluorophore (electron acceptor) is separately linked with a recognition group (electron donor) via a short spacer. PET probes normally feature a low fluorescence background and significant fluorescence enhancement in response to targets. Recent research revealed that PET probes have also been used as theranostic agents, whose fluorescence and toxicity can be simultaneously activated by cancer-specific parameters. In this Account, we highlight the recent advances of rational design and applications of PET probes, focusing primarily on studies from our research group. For example, different from the case of the traditional single-atom electron donor (O, S, N, Se, Te, etc.) in typical PET, we used more a electron-rich pyrrole ring to "switch off" the fluorescence of the fluorophore more efficiently through an "enhanced PET" effect which provided a lower background fluorescence and higher signal-to-noise ratio. Furthermore, normal PET represents the main principle behind the design of small molecule "off-on" fluorescent sensors. We developed new PET platform through intramolecular space folding (folding PET) to overcome the difficulty of designing PET enzyme-targeting probes. Therefore, based on typical PET and these new PET concepts, we, for instance, reported PET probes for the detection of Zn²⁺ without proton interference, a BODIPY-based d-PET probe for reporting local hydrophilicity within lysosomes, and an "enhanced PET" fluorescent probe for imaging HClO in cancer cells. We also developed COX-2-specific probe for identifying cancer cells and quantifying cancer-related events, and a KIAA1363-sensitive probe for tracking solid tumors in living mice. Furthermore, we first applied an aminopeptidase N (APN)-sensitive probe based on PET for cancer diagnosis and therapy. We anticipate that further development of PET fluorescent probes providing more sensitivity and selectivity to analytes of interest will be equipped with more functions and play indispensable roles in the studies of pathology, diagnostics, and cancer therapies.

Single fluorescent probe for reversibly detecting copper ions and cysteine in a pure water system

In this work, we have engineered a novel fluorescent probe PI, which remarkably can reversible detect copper ion and cysteine in pure water system for the first time.

New duel fluorescent "on-off" and colorimetric sensor for Copper(II): Copper(II) binds through N coordination and pi cation interaction to sensor

Schiff base derived from naphthylamine and benzil (L) binds to two Cu(2+) ions, one by coordination through N of the Schiff base and another by pi cation interaction through benzil rings. This bonding pattern determined by DFT calculation has been proved by matching electronic spectrum obtained from TDDFT calculation to the experimental one. L acts as "on-off" fluorescent and bare eye detectable colorimetric (purple color) sensor for Cu(2+) ion over the metal ions - Na(+), K(+), Ca(2+) Mn(2+), Co(2+) Ni(2+), Zn(2+), Pb(2+), Cd(2+), Hg(2+), Ag(+), Hg(2+) and Al(3+) in 1:1 v/v CH3CN:H2O. These metal ions do not interfere the fluorescent/colorimetric sensing. As fluorescent sensor the linear range of detection is 5×10(-5) to 3×10(-4)M and detection limit 10(-5)M.

A turn-on fluorescent pyrene-based chemosensor for Cu(ii) with live cell application

A pyrene-based fluorescent sensor (PHP) was synthesized for Cu(ii) detection.

A highly selective fluorescent probe for Cu2+ based on rhodamine B derivative

A new fluorescent probe 1 for Cu(2+) based on a rhodamine B derivative was designed and synthesized. Probe 1 displays high sensitivity toward Cu(2+) and about a 37-fold increase in fluorescence emission intensity is observed upon the addition of 10 equiv. Cu(2+) in 50% water/ethanol buffered at pH 7.10. Besides, upon binding Cu(2+) a remarkable color change from colorless to pink was easily observed by the naked eyes. The reversible dual chromo- and fluorogenic response toward Cu(2+) is likely due to the chelation-induced ring-opening of rhodamine spirolactam. The linear response range covers a concentration range of Cu(2+) from 8.0×10(-7) to 1.0×10(-4) mol/L and the detection limit is 3.0×10(-7) mol/L. Except Co(2+), the probe exhibits high selectivity for Cu(2+) over a large number of cations such as alkaline, alkaline earth and transitional metal ions. The accuracy and precision of the method were evaluated by the analysis of the standard reference material, copper in water (1.0 mol/L HNO3). The proposed probe has been used for direct measurement of Cu(2+) content in river water samples and imaging of Cu(2+) in living cells with satisfying results, which further demonstrates its value of practical applications in environmental and biological systems.

A coumarin-based sensitive and selective fluorescent sensor for copper(ii) ions

A new coumarin-derived fluorescent probe (1) exhibited significant fluorescence quenching in the presence of Cu²⁺ ions.

10-{4-[(2-Hydroxybenzylidene)amino]phenyl}-5,5-difluoro-1,3,7,9-tetramethyl-5H-dipyrrolo[1,2-c:2′,1′-f][1,3,2]diazaborinin-4-ium-5-uide

The title compound, C₂₆H₂₄BF₂N₃O, comprises a boron–dipyrromethene (BODIPY) framework and a phenolic Schiff base substituent group. The BODIPY unit is close to planar [maximum deviation from the least-squares plane = 0.040 (3) Å], and forms a dihedral angle of 80.38 (13)° with the meso-substituent phenyl ring and an angle of 56.57 (13)° with the phenolic ring in the extended substituent chain. An intra­molecular O—H⋯N hydrogen bond is formed between the phenolic hydroxyl group and the Schiff base N-atom. The crystal studied was a non-merohedral twin with a BASF factor of 0.447 (3) for the two components.

Rhodamine-based 'turn-on' fluorescent probe for Cu(II) and its fluorescence imaging in living cells

A novel rhodamine spirolactam derivative 3',6'-Bis(diethylamino)-2-(2-hydroxyethylamino) spiro[isoindoline-1,9'-xanthen]-3-one (RO1) was synthesized, and characterized by high-resolution mass spectrometry (HRMS), X-ray crystallography, Infrared spectroscopy (IR), and (1)H NMR and (13)C NMR spectroscopy. RO1 exhibited highly sensitive and exclusively selective fluorescence response toward Cu(2+) over other metal ions with a detection limit of 0.56ppb in mixed aqueous solution. The fluorescence was pH-independent in the wide range pH 3.1-11.6. The turn-on fluorescence enhancement of the probe is based on Cu(2+) induced ring-opening mechanism of the rhodamine spirolactam. Moreover, by means of fluorescence microscopy experiments, it was demonstrated that RO1 could monitor trace Cu(2+) changes by live cell imaging.