Development of an automatic multi-channel ink-jet ejection chemiluminescence system and its application to the determination of horseradish peroxidase

Carbon dots derived from expired drugs based ratiometric fluorescent sensor for horseradish peroxidase in fruits and vegetables and screening inhibitors

Household storage of pharmaceuticals to extract raw materials synthesized from carbon points facilitates the utilization of solid waste resources. A novel ratiometric fluorescence sensing technique was developed to ascertain the presence of horseradish peroxidase (HRP) in fruits and vegetables. The method employed a fluorescent probe, synthesized from expired amoxicillin (referred to as carbon dots, or A-CDs), serving as a reference fluorophore. Additionally, 2,3-diaminophenazine (DAP) was utilized as a specific response signal. DAP resulted from a catalytic reaction system involving phenylenediamine and hydrogen peroxide under the catalysis of HRP. The fluorescence intensity corresponding to DAP at 562 nm exhibited a substantial increase, simultaneous with the fluorescence quenching of A-CDs at 450 nm. The ratiometric fluorescence nanosensors displayed a broad linear range and high sensitivity for the detection of HRP. Across the concentration range 0.01 to 6 U L-1, the fluorescence intensity ratio between DAP and A-CDs demonstrated a proportional increase with rising HRP concentration, achieving an impressive detection limit of 0.002 U L-1. The recovery of HRP in fruit and vegetable samples ranged from 96.1 to 103%, with an RSD value of less than 3.8%. The proposed method facilitated the screening of inhibitors of HRP enzyme activity, contributing to the preservation of freshness in fruits and vegetables.

Cationic AIEgen micelle-improved chemiluminescent H2O2 assay by integrating reactant approach and CRET

The enhancement of chemiluminescence (CL) intensity is significant in the development of chemiluminescent detection systems with improved sensitivity. In this study, a cationic surfactant with an intrinsic aggregation-induced emission emitter (AIEgen) has been applied to boost the CL signal of the horseradish peroxidase-luminol-H₂O₂ system. The formed cationic AIEgen micelles enhance the CL signal in two ways: the electrostatic attraction-mediated enrichment and approach of reactants and the high CRET efficiency between excited luminol radicals and AIEgen in the surfactant backbone. As a result, strong CL intensity is produced. Rapid and sensitive H₂O₂ detection is realized through the proposed cationic AIEgen micelle-containing chemiluminescent system with a limit of detection of 100 nM. The favourable selectivity over other possible interferents including metal ions and anions is due to the specific chemical reaction. Practical H₂O₂ analysis of thawing water samples with high accuracy using the proposed chemiluminescent platform is realized and is consistent with standard methods.

Self-Illuminating Photodynamic Therapy with Enhanced Therapeutic Effect by Optimization of the Chemiluminescence Resonance Energy Transfer Step to the Photosensitizer

The major obstacles to the wider application of photodynamic therapy (PDT) are drawbacks of the current photosensitizers and the tissue penetration limit of the common outer light source. In the present study, the chemiluminescence (CL) from the luminol-H₂O₂-horseradish peroxidase reaction was explored as a potential inner light source for the intracellular activation of carbon dots (CDs)-based PDT system. To fully use the light and enhance the overall PDT yield, the nanocarrier of CDs, the light of CL, and the PDT agent chlorin e6 (Ce6) were carefully selected and designed to form an efficient and united system. Bright-yellow-emissive CDs (y-CDs) were synthesized through purposeful regulation of the absorption and emission spectra to enhance the overlapping areas in the chemiluminescence resonance energy transfer (CRET) and fluorescence resonance energy transfer (FRET) processes. Our results reflected CL-induced y-CDs-Ce6 system (10 μM) successfully generated reactive oxygen species (ROS, 35.93%), killed ∼90% SMMC-7721 cells in vitro, and significantly delayed tumor growth in vivo. On the basis of immunohistochemical observations of proliferating cell nuclear antigen (PCNA) and platelet/endothelial cell adhesion molecule-1 (PECAM-1 or CD31) results, we concluded that the CL-induced y-CDs-Ce6 system had excellent performance in cancer therapy. The enhanced therapeutic effect was ascribed to two pathways: a direct CRET process and another process of CRET with subsequent y-CD-mediated FRET (CRET-to-FRET).

Study of horseradish peroxidase and hydrogen peroxide bi-analyte sensor with boronate affinity-based molecularly imprinted film

A novel electrochemical horseradish peroxidase (HRP) sensor was developed based on boronate affinity-based electropolymerized polythionine (PTh) molecularly imprinted polymer (MIP) as specific recognition element for HRP on gold nanoparticles (AuNPs) modified glassy carbon electrode, in which PTh acted as the electrochemical probe for the sensor. The sensor was characterized by scanning electron microscopy and electron dispersive spectroscopy. Electrochemical impedance spectroscopy, cyclic voltammetry, and differential pulse voltammetry were exploited for the study of the properties of the MIP sensor. The MIP sensor exhibited excellent linear response over the range of 2.0 × 10−10 mg/mL ∼ 1.0 × 10−7 mg/mL for HRP. In addition, with MIP film as HRP immobilized matrices, the sensor for the detection of H2O2 was developed with the MIP sensor based on the reduction of H2O2 catalyzed by HRP in the presence of electron mediator PTh. The sensor showed linear relationships between the current response and H2O2 concentration from 6.0 × 10−7 to 2.0 × 10−5 mol/L. HRP and H2O2 bi-analyte sensor based on MIP film was successfully developed in this work. The developed method can also be applicable for enzyme and its enzymatic substrate bi-analyte sensor.

InP/ZnS quantum dot-based fluorescent probe for directly sensitive and selective detection of horseradish peroxidase

InP/ZnS quantum dot (QD)-based fluorescent probe for directly sensitive and selective detection of horseradish peroxidase (HRP) was reported herein. Fluorescence of InP/ZnS QDs was statically quenched by HRP, due to the ground state complex formation of InP/ZnS QDs with HRP. Such ground state complex formation between InP/ZnS QDs and HRP reduced both the α-helix content and the melting temperature of HRP. Several key factors including InP/ZnS QDs concentration, buffer pH value, ionic strength, reaction temperature, and reaction time those affected the analytical performance of InP/ZnS QDs in HRP determination were investigated thoroughly. Under the optimal conditions, fluorescence intensity of InP/ZnS QDs was linearly decreased with the increasing of HRP concentration during the range of 1.0 × 10^-9 M ∼ 3.0 × 10^-8 M (0.01 U ml^-1 ∼ 0.3 U ml^-1) with the detection limit as low as 1.2 × 10^-10 M (1.2 mU ml^-1). The present method showed excellent selectivity for HRP over some amino acids, nucleotides, and common proteins. This method was utilized to detect HRP in synthetic samples successfully.

Recent advances in chemiluminescence based on carbonaceous dots

Herein, a broad overview concerning the most recent progress of carbon dots (CDs) in chemiluminescence (CL) as well as the mechanisms and applications are presented. CDs have excellent optical and electronic properties and are very important advancement in the fast growing domain of nanotechnology. CDs enhance the ultraweak CL of different systems. The mechanisms and applications of these enhanced CL reactions are discussed. It is worthy to note that CDs participate in CL reactions as catalysts, energy acceptors or are directly involved in redox reactions with radicals in CL systems. Sometimes, these processes taking place simultaneously to enhance CL intensity. In this report, recent advances in CD based CL are comprehensively summarized and their applications in detection of various reagents and biological molecules are reviewed. The challenges and future prospects of this field are also discussed.

Stereolithography-Based 3D Printed "Pillar Plates" that Minimizes Fluid Transfers During Enzyme Linked Immunosorbent Assays

Enzyme linked immunosorbent assay (ELISA) is one of the most popular and indispensable tools in molecular biology. Despite numerous advances in ELISA methods that markedly improve the sensitivity and throughput of detection, a hallmark of all ELISA continues to be repeated pipetting of fluids that is not only cumbersome but can easily introduce errors or contaminations. Robotics, despite obvious advantages, remains expensive. Here, we designed and produced cheap "pillar plates" using stereolithography-based 3D printing that can be readily inserted into conventional 96- and 384- well plates and serve as the substrate for ELISA. We demonstrate that ELISA using these "pillar plates" affords comparable specificity and sensitivity of detection of serum antibodies to traditional sandwich ELISA, while markedly reducing the time and efforts associated with fluid transfer. These results underscore "pillar plates" as an attractive platform for rapid yet robotics-free ELISA.

High sensitivity, high surface area Enzyme-linked Immunosorbent Assay (ELISA)

BACKGROUND

Enzyme-linked immunosorbent assays (ELISA) are considered the gold standard in the demonstration of various immunological reactions with an application in the detection of infectious diseases such as during outbreaks or in patient care.

OBJECTIVE

This study aimed to produce an ELISA-based diagnostic with an increased sensitivity of detection compared to the standard 96-well method in the immunologic diagnosis of infectious diseases.

METHODS

A '3DStack' was developed using readily available, low cost fabrication technologies namely nanoimprinting and press stamping with an increased surface area of 4 to 6 times more compared to 96-well plates. This was achieved by stacking multiple nanoimprinted polymer sheets. The flow of analytes between the sheets was enhanced by rotating the 3DStack and confirmed by Finite-Element (FE) simulation. An Immunoglobulin G (IgG) ELISA for the detection of antibodies in human serum raised against Rubella virus was performed for validation.

RESULTS

An improved sensitivity of up to 1.9 folds higher was observed using the 3DStack compared to the standard method.

CONCLUSIONS

The increased surface area of the 3DStack developed using nanoimprinting and press stamping technologies, and the flow pattern between sheets generated by rotating the 3DStack were potential contributors to a more sensitive ELISA-based diagnostic device.

Application of 3D Printing Technology in Increasing the Diagnostic Performance of Enzyme-Linked Immunosorbent Assay (ELISA) for Infectious Diseases

Enzyme-linked Immunosorbent Assay (ELISA)-based diagnosis is the mainstay for measuring antibody response in infectious diseases and to support pathogen identification of potential use in infectious disease outbreaks and clinical care of individual patients. The development of laboratory diagnostics using readily available 3D printing technologies provides a timely opportunity for further expansion of this technology into immunodetection systems. Utilizing available 3D printing platforms, a ‘3D well’ was designed and developed to have an increased surface area compared to those of 96-well plates. The ease and rapidity of the development of the 3D well prototype provided an opportunity for its rapid validation through the diagnostic performance of ELISA in infectious disease without modifying current laboratory practices for ELISA. The improved sensitivity of the 3D well of up to 2.25-fold higher compared to the 96-well ELISA provides a potential for the expansion of this technology towards miniaturization and Lab-On-a-Chip platforms to reduce time, volume of reagents and samples needed for such assays in the laboratory diagnosis of infectious and other diseases including applications in other disciplines.

Study on Enhancement Principle and Stabilization for the Luminol-H2O2-HRP Chemiluminescence System

A luminol-H2O2-HRP chemiluminescence system with high relative luminescent intensity (RLU) and long stabilization time was investigated. First, the comparative study on the enhancement effect of ten compounds as enhancers to the luminol-H2O2-HRP chemiluminescence system was carried out, and the results showed that 4-(imidazol-1-yl)phenol (4-IMP), 4-iodophenol (4-IOP), 4-bromophenol (4-BOP) and 4-hydroxy-4'-iodobiphenyl (HIOP) had the best performance. Based on the experiment, the four enhancers were dissolved in acetone, acetonitrile, methanol, and dimethylformamide (DMF) with various concentrations, the results indicated that 4-IMP, 4-IOP, 4-BOP and HIOP dissolved in DMF with the concentrations of 0.2%, 3.2%, 1.6% and 3.2% could get the highest RLU values. Subsequently, the influences of pH, ionic strength, HRP, 4-IMP, 4-IOP, 4-BOP, HIOP, H2O2 and luminol on the stabilization of the luminol-H2O2-HRP chemiluminescence system were studied, and we found that pH value, ionic strength, 4-IMP, 4-IOP, 4-BOP, HIOP, H2O2 and luminol have little influence on luminescent stabilization, while HRP has a great influence. In different ranges of HRP concentration, different enhancers should be selected. When the concentration is within the range of 0~6 ng/mL, 4-IMP should be selected. When the concentration of HRP ranges from 6 to 25 ng/mL, 4-IOP was the best choice. And when the concentration is within the range of 25~80 ng/mL, HIOP should be selected as the enhancer. Finally, the three well-performing chemiluminescent enhanced solutions (CESs) have been further optimized according to the three enhancers (4-IMP, 4-IOP and HIOP) in their utilized HRP concentration ranges.

Drop-by-drop chemical reaction and sample introduction for capillary electrophoresis

In this paper, we report a novel sample introduction and chemical reaction strategy by drop-by-drop inkjet injection for an electrophoretically mediated microanalysis (EMMA). This method makes it possible to achieve an on-line introduction of reactant solutions by alternately ejecting small plugs, with an overlapping region of the plugs for mixing the reactants by electrophoresis, supporting chemical reactions, followed by electrophoretic separation of the final compounds. As a proof-of-concept of the method, the EMMA of an inkjetted mixture of 4-fluoro-7-nitrobenzofurazan (NBD-F) and amino acids was carried out as a model chemical reaction. The product NBD-amino acids were quantified by detection with laser induced fluorescence. The optimal conditions for the procedure were: inkjet driving voltage: +40-44 V; pulse width: 20-24 μs; drop-by-drop injection of reactant solutions: alternately 2 drops × 25 times for the amino acid solution and the NBD-F solution; zone overlapping voltage and time: 3 kV and 2 s; incubation time after overlapping: 5 min; separation voltage: 18 kV. Under the optimized conditions, a significant enhancement in sensitivity and a sensitive quantitative analysis were realized. The results obtained were comparable with those using the off-line labeling method. This method is rapid, cost-effective, and readily automated for EMMA.

A new label-free strategy for a highly efficient chemiluminescence immunoassay

A new label-free chemiluminescence (CL) immunoassay method which is based on the co-immobilization of a capture antibody and horseradish peroxidase (HRP) on the Au nanoparticle–chitosan composite interface is proposed for the cheap, fast and convenient detection of proteins.

A piezoelectric drop-on-demand generator for accurate samples in capillary electrophoresis

In this work, we propose a piezoelectric droplet generator for injection of well-defined amounts of sample in capillary electrophoresis. We demonstrate stable, precise and drop-on-demand droplet formation for various solutions, with precise control of waveform driving piezoelectric crystal inside the ink-jet head. By tuning the waveform, we can also manipulate the droplet size and delivery frequency. This injector was used in sampling for capillary electrophoresis. As a state-of-the-art application, the analysis of theobromine, caffeine and theophiline using micellar electrokinetic chromatography was developed. The volume of sample (single droplet) analyzed in this experiment was 179 pL (RSD=1.2%, n=10). The detection limits for caffeine, theobromine, and theophiline are 0.02, 0.08 and 0.06 mM L(-1), respectively. Compared with conventional methods, the combination of picoliter droplet dispenser with capillary electrophoresis allows precise and accurate sampling, as well as for reduced sample consumption, which will prove to be an efficient tool in quantitative separation and analysis.