Biotin-exposure-based immunomagnetic separation coupled with nucleic acid lateral flow biosensor for visibly detecting viable Listeria monocytogenes

Polystyrene microsphere-mediated optical sensing strategy for ultrasensitive determination of aflatoxin M1 in milk

Aflatoxin M₁ (AFM₁) contamination poses a serious threat to human health globally. Hence, it is necessary to develop reliable and ultrasensitive methods for the determination of AFM₁ residue in food products at low levels. In this study, a novel polystyrene microsphere-mediated optical sensing (PSM-OS) strategy was constructed to solve the problems of low sensitivity and susceptibility to interference from the matrix in AFM₁ determination. Polystyrene (PS) microspheres have the advantages of low cost, high stability, and controllable particle size. They can be useful optical signal probes for qualitative and quantitative analyses attributed to the fact that they have strong ultraviolet-visible (UV-vis) characteristic absorption peaks. Briefly, magnetic nanoparticles were modified with the complex of bovine serum protein and AFM₁ (MNP₁₅₀-BSA-AFM₁), and biotinylated antibodies of AFM₁ (AFM₁-Ab-Bio). Meanwhile, PS microspheres were also functionalized with streptavidin (SA-PS₉₅₀). In the presence of AFM₁, a competitive immune reaction was triggered leading to the changes in AFM₁-Ab-Bio concentrations on the surface of MNP₁₅₀-BSA-AFM₁. The complex of MNP₁₅₀-BSA-AFM₁-Ab-Bio binds with SA-PS₉₅₀ to form the immune complexes due to the special binding of biotin and streptavidin. The remaining SA-PS₉₅₀ in the supernatant was determined by UV-Vis spectrophotometer after magnetic separation, which positively correlated with the concentration of AFM₁. This strategy allows for ultrasensitive determination of AFM₁ with limits of detection as low as 3.2 pg/mL. It was also successfully validated for AFM₁ determination in milk samples, and a high consistency was found with the chemiluminescence immunoassay. Overall, the proposed PSM-OS strategy can be used for the rapid, ultrasensitive, and convenient determination of AFM₁, as well as other biochemical analytes.

Smartphone-assisted colorimetric detection of Salmonella typhimurium based on the catalytic reduction of 4-nitrophenol by β-cyclodextrin-capped gold nanoparticles

Salmonella typhimurium (S. typhimurium) is one of the most common pathogens in the environment, such as in drinking water and soil. Herein, an on-site detection method was developed by combining silver-coated magnetic nanoparticles (Fe₃O₄@Ag NPs) with the β-cyclodextrin-capped gold nanoparticles (β-CD-Au NPs) to achieve sensitive detection of S. typhimurium. After they formed a sandwich structure in the presence of S. typhimurium, the 4-nitrophenol was reduced to 4-aminophenol based on the nitro-reductase activity of β-CD-Au NPs. The naked eyes were able to observe the color change from yellow to colorless. Under optimal conditions, the detection range of S. typhimurium was 10-10⁷ CFU mL^-1, and the limit of detection (LOD) was 10 CFU mL^-1. The total detection time was 90 min, showing satisfactory performance in real samples. We combined a smartphone app with the colorimetric method, making it possible to semi-quantitatively detect S. typhimurium by analyzing the grey value. In conclusion, this assay detects S. typhimurium in environmental samples, offering an accurate and sensitive detection method without sophisticated equipment.

Advances in magnetic nanoparticles for the separation of foodborne pathogens: Recognition, separation strategy, and application

Foodborne pathogens contamination is one of the main sources of food safety problems. Although the existing detection methods have been developed for a long time, the complexity of food samples is still the main factor affecting the detection time and sensitivity, and the rapid separation and enrichment of pathogens is still an objective to be studied. Magnetic separation strategy based on magnetic nanoparticles (MNPs) is considered to be an effective tool for rapid separation and enrichment of foodborne pathogens in food. Therefore, this study comprehensively reviews the development of MNPs in the separation of foodborne pathogens over the past decade. First, various biorecognition reagents for identification of foodborne pathogens and their modifications on the surface of MNPs are introduced. Then, the factors affecting the separation of foodborne pathogens, including the size of MNPs, modification methods, separation strategies and separation forms are discussed. Finally, the application of MNPs in integrated detection methods is reviewed. Moreover, current challenges and prospects of MNPs for the analysis of foodborne pathogens are discussed. Further research should focus on the design of multifunctional MNPs, the processing of large-scale samples, the simultaneous analysis of multiple targets, and the development of all-in-one small analytical device with separation and detection.

State of the art: Lateral flow assays toward the point-of-care foodborne pathogenic bacteria detection in food samples

Diverse chemicals and some physical phenomena recently introduced in nanotechnology have enabled scientists to develop useful devices in the field of food sciences. Concerning such developments, detecting foodborne pathogenic bacteria is now an important issue. These kinds of bacteria species have demonstrated severe health effects after consuming foods and high mortality related to acute cases. The most leading path of intoxication and infection has been through food matrices. Hence, quick recognition of foodborne bacteria agents at low concentrations has been required in current diagnostics. Lateral flow assays (LFAs) are one of the urgent and prevalently applied quick recognition methods that have been settled for recognizing diverse types of analytes. Thus, the present review has stressed on latest developments in LFAs-based platforms to detect various foodborne pathogenic bacteria such as Salmonella, Listeria, Escherichia coli, Brucella, Shigella, Staphylococcus aureus, Clostridium botulinum, and Vibrio cholera. Proper prominence has been given on exactly how the labels, detection elements, or procedures have affected recent developments in the evaluation of diverse bacteria using LFAs. Additionally, the modifications in assays specificity and sensitivity consistent with applied food processing techniques have been discussed. Finally, a conclusion has been drawn for highlighting the main challenges confronted through this method and offered a view and insight of thoughts for its further development in the future.

Basic Principles and Recent Advances in Magnetic Cell Separation

Magnetic cell separation has become a key methodology for the isolation of target cell populations from biological suspensions, covering a wide spectrum of applications from diagnosis and therapy in biomedicine to environmental applications or fundamental research in biology. There now exists a great variety of commercially available separation instruments and reagents, which has permitted rapid dissemination of the technology. However, there is still an increasing demand for new tools and protocols which provide improved selectivity, yield and sensitivity of the separation process while reducing cost and providing a faster response. This review aims to introduce basic principles of magnetic cell separation for the neophyte, while giving an overview of recent research in the field, from the development of new cell labeling strategies to the design of integrated microfluidic cell sorters and of point-of-care platforms combining cell selection, capture, and downstream detection. Finally, we focus on clinical, industrial and environmental applications where magnetic cell separation strategies are amongst the most promising techniques to address the challenges of isolating rare cells.

Recent advances in magnetic nanoparticle-based microfluidic devices for the pretreatment of pathogenic bacteria

Rapid and sensitive detection of pathogenic bacteria in various samples, including food and drinking water, is important to prevent bacterial diseases. Most bacterial solutions contain only a small number of bacteria in complex matrices with impurities; hence, pretreatment is necessary to separate and concentrate target bacteria before sensing. Among various pretreatment methods, iron oxide magnetic nanoparticle (MNP)-based pretreatment has drawn attention owing to the unique properties of MNP, such as high magnetic susceptibility, superparamagnetism, and biocompatibility. After target bacteria are captured by recognition molecule-functionalized MNPs, bacteria-MNP complexes can be easily separated and enriched by applying an external magnetic field. Various devices, such as optical, electrochemical, and magnetoresistance sensors, can be used to detect target bacteria, and their detection principles have been discussed in numerous review papers. Herein, we focus on recent research advances and challenges in magnetic pretreatment of pathogenic bacteria using microfluidic devices, which offer the advantages of process automation and miniaturization.

Nanomaterial application in bio/sensors for the detection of infectious diseases

Infectious diseases are a potential risk for public health and the global economy. Fast and accurate detection of the pathogens that cause these infections is important to avoid the transmission of the diseases. Conventional methods for the detection of these microorganisms are time-consuming, costly, and not applicable for on-site monitoring. Biosensors can provide a fast, reliable, and point of care diagnostic. Nanomaterials, due to their outstanding electrical, chemical, and optical features, have become key players in the area of biosensors. This review will cover different nanomaterials that employed in electrochemical, optical, and instrumental biosensors for infectious disease diagnosis and how these contributed to enhancing the sensitivity and rapidity of the various sensing platforms. Examples of nanomaterial synthesis methods as well as a comprehensive description of their properties are explained. Moreover, when available, comparative data, in the presence and absence of the nanomaterials, have been reported to further highlight how the usage of nanomaterials enhances the performances of the sensor.

Antibody- and nucleic acid-based lateral flow immunoassay for Listeria monocytogenes detection

Listeria monocytogenes is an invasive opportunistic foodborne pathogen and its routine surveillance is critical for protecting the food supply and public health. The traditional detection methods are time-consuming and require trained personnel. Lateral flow immunoassay (LFIA), on the other hand, is an easy-to-perform, rapid point-of-care test and has been widely used as an inexpensive surveillance tool. In recent times, nucleic acid-based lateral flow immunoassays (NALFIA) are also developed to improve sensitivity and specificity. A significant improvement in lateral flow-based assays has been reported in recent years, especially the ligands (antibodies, nucleic acids, aptamers, bacteriophage), labeling molecules, and overall assay configurations to improve detection sensitivity, specificity, and automated interpretation of results. In most commercial applications, LFIA has been used with enriched food/environmental samples to ensure detection of live cells thus prolonging the assay time to 24-48 h; however, with the recent improvement in LFIA sensitivity, results can be obtained in less than 8 h with shortened and improved enrichment practices. Incorporation of surface-enhanced Raman spectroscopy and/or immunomagnetic separation could significantly improve LFIA sensitivity for near-real-time point-of-care detection of L. monocytogenes for food safety and public health applications.

Listeria monocytogenes: review of pathogenesis and virulence determinants-targeted immunological assays

Listeria monocytogenes is one of the most invasive foodborne pathogens and is responsible for numerous outbreaks worldwide. Most of the methods to detect this bacterium in food require selective enrichment using traditional bacterial culture techniques that can be time-consuming and labour-intensive. Moreover, molecular methods are expensive and need specific technical knowledge. In contrast, immunological approaches are faster, simpler, and user-friendly alternatives and have been developed for the detection of L. monocytogenes in food, environmental, and clinical samples. These techniques are dependent on the constitutive expression of L. monocytogenes antigens and the specificity of the antibodies used. Here, updated knowledge on pathogenesis and the key immunogenic virulence determinants of L. monocytogenes that are used for the generation of monoclonal and polyclonal antibodies for the serological assay development are summarised. In addition, immunological approaches based on enzyme-linked immunosorbent assay, immunofluorescence, lateral flow immunochromatographic assays, and immunosensors with relevant improvements are highlighted. Though the sensitivity and specificity of the assays were improved significantly, methods still face many challenges that require further validation before use.

Vancomycin-dendrimer based multivalent magnetic separation nanoplatforms combined with multiplex quantitative PCR assay for detecting pathogenic bacteria in human blood

Sepsis caused by bacteria has high morbidity and mortality, and it is neccerssay to establish a fast, convenient, and facility assays for detection of bacteria. In this study, we have developed established a simple, rapid, and ultrasensitive vancomycin (Van) and dendrimer nanoparticles-based method to isolate and detect bacteria in human blood using a multivalent binding strategy. The proposed Bio-den-Van multivalent capture nanoplatform combined with m-qPCR for simultaneous detection of two kinds of bacteria was demonstrated with rapid 2 min bacteria isolation with a linear range at 3.2 × 10¹-3.2 × 10⁶ CFU·mL^-1 for L. monocytogenes and 4.1 × 10¹-4.1 × 10⁶ CFU·mL^-1 for S. aureus, respectively. The limit of detection (LOD) for simultaneous detection of L. monocytogenes and S. aureus were 32 and 41 CFU·mL^-1 in spiked human blood samples, respectively. Other bacteria had an insignificant interference with the test results. This Bio-den-Van multivalent capture nanoplatform combined with m-qPCR detection exhibited rapid, high sensitivity and specificity in simultaneous detection of various bacteria. To our knowledge, this is the first time that Bio-den-Van multivalent capture nanoplatform was used with Van as a recognition molecule for the simultaneous capture and subsequent detection of two bacteria from spiked human blood sample. This method holds great potential for future clinical applications.

Biotin exposure-based immunomagnetic separation coupled with sodium dodecyl sulfate, propidium monoazide, and multiplex real-time PCR for rapid detection of viable Salmonella Typhimurium, Staphylococcus aureus, and Listeria monocytogenes in milk

In this study, we established a rapid and sensitive method for the detection of viable Salmonella Typhimurium, Staphylococcus aureus, and Listeria monocytogenes in milk using biotin-exposure-based immunomagnetic separation (IMS) combined with sodium dodecyl sulfate (SDS), propidium monoazide (PMA), and multiplex real-time PCR (mRT-PCR). We used IMS to lessen the assay time for isolation of target bacteria. We then optimized the coupling conditions and immunomagnetic capture process. The immunoreaction and incubation times for 5 μg of mAb coupled with 500 μg of streptavidin-functionalized magnetic beads using a streptavidin-biotin system were 90 and 30 min, respectively. Treatment with SDS-PMA before mRT-PCR amplification eliminated false-positive outcomes from dead bacteria and identified viable target bacteria with good sensitivity and specificity. The limit of detection of IMS combined with the SDS-PMA-mRT-PCR assay for the detection of viable Salmonella Typhimurium, Staph. aureus, and L. monocytogenes in spiked milk matrix samples was 10 cfu/mL and remained significant even in the appearance of 10⁶ cfu/mL of nontarget bacteria. The entire detection process was able to identify viable bacteria within 9 h. The combination of biotin-exposure-mediated IMS and SDS-PMA-mRT-PCR has potential value for the rapid and sensitive detection of foodborne pathogens.

Immunomagnetic separation: An effective pretreatment technology for isolation and enrichment in food microorganisms detection

The high efficiency and accurate detection of foodborne pathogens and spoilage microorganisms in food are a task of great social, economic, and public health importance. However, the contamination levels of target bacteria in food samples are very low. Owing to the background interference of food ingredients and negative impact of nontarget flora, the establishment of efficient pretreatment techniques is very crucial for the detection of food microorganisms. With the significant advantages of high specificity and great separation efficiency, immunomagnetic separation (IMS) assay based on immunomagnetic particles (IMPs) has been considered as a powerful system for the separation and enrichment of target bacteria. This paper mainly focuses on the development of IMS as well as their application in food microorganisms detection. First, the basic principle of IMS in the concentration of food bacteria is presented. Second, the effect of different factors, including the sizes of magnetic particles (MPs), immobilization of antibody and operation parameters (the molar ratio of antibody to MPs, the amount of IMPs, incubation time, and bacteria concentration) on the immunocapture efficiency of IMPs are discussed. The performance of IMPs in different food samples is also evaluated. Finally, the combination of IMS and various kinds of detection methods (immunology-based methods, nucleic acid-based methods, fluorescence methods, and biosensors) to detect pathogenic and spoilage organisms is summarized. The challenges and future trends of IMS are also proposed. As an effective pretreatment technique, IMS can improve the detection sensitivity and shorten their testing time, thus exhibiting broad prospect in the field of food bacteria detection.

Recent progress and challenges on the bioassay of pathogenic bacteria

The present review (containing 242 references) illustrates the importance and application of optical and electrochemical methods as well as their performance improvement using various methods for the detection of pathogenic bacteria. The application of advanced nanomaterials including hyper branched nanopolymers, carbon-based materials and silver, gold and so on. nanoparticles for biosensing of pathogenic bacteria was also investigated. In addition, a summary of the applications of nanoparticle-based electrochemical biosensors for the identification of pathogenic bacteria has been provided and their advantages, detriments and future development capabilities was argued. Therefore, the main focus in the present review is to investigate the role of nanomaterials in the development of biosensors for the detection of pathogenic bacteria. In addition, type of nanoparticles, analytes, methods of detection and injection, sensitivity, matrix and method of tagging are also argued in detail. As a result, we have collected electrochemical and optical biosensors designed to detect pathogenic bacteria, and argued outstanding features, research opportunities, potential and prospects for their development, according to recently published research articles.

Paper chip-based colorimetric assay for detection of Salmonella typhimurium by combining aptamer-modified Fe3O4@Ag nanoprobes and urease activity inhibition

A rapid and sensitive colorimetric assay is described for Salmonella typhimurium (S. typhimurium) detection using urea/phenol red impregnated test paper. Aptamer-modified Fe₃O₄@Ag multifunctional hybrid nanoprobes (apt-Fe₃O₄@Ag NPs) were used to specifically captured S. typhimurium; the nanoprobes were quickly etched by H₂O₂ to form Ag⁺. The generated Ag⁺ can inhibit the urease-catalyzed hydrolysis reaction of urea to produce NH₄⁺. Consequently, the as-prepared test paper displayed a yellow color. In the presence of S. typhimurium, the target bacteria can cause aggregation of apt-Fe₃O₄@Ag NPs, and the deposited Ag on the nanoprobe's surface is shielded against H₂O₂-induced oxidative decomposition leading to reduced Ag⁺ production. The catalytic activity of urease cannot be inhibited completely by inadequate amount of Ag⁺. An obvious color change from yellow to pink can be monitored directly using our test paper as a result of increased NH₄⁺. The entire assay procedure could be completed within 1 h. A limit of detection of 48 cfu/mL is achieved with a linear range of 1 × 10² to 1 × 10⁶ cfu/mL. The recoveries of S. typhimurium spiked in pure milk samples were 92.48-94.05%. Graphical abstract Schematic diagram of the proposed colorimetric assay for S. typhimurium detection based on etching of bifunctional apt-Fe₃O₄@Ag NPs and inhibiting catalytic activity of urease by Ag⁺. A color change from yellow to pink can be observed and correlated to the concentration of S. typhimurium.

One-step and DNA amplification-free detection of Listeria monocytogenes in ham samples: Combining magnetic relaxation switching and DNA hybridization reaction

Early screening of L. monocytogenes in ready-to-eat food can prevent and control its harmful effects. In this study, we propose a highly sensitive magnetic DNA sensor based on nucleic acid hybridization reaction and magnetic signal readout. We design the L. monocytogenes specific probe₁ and probe₂ and label them on the 30 and 250 nm magnetic nanoparticles, respectively. The hybridization reaction between the magnetic probes and DNA of L. monocytogenes could form a sandwich nanocomplex. After magnetic separation, the unbound MNP₃₀-probe₂ can act as the transverse relaxation time (T₂) signal readout probe. This assay allows the one-step detection of L. monocytogenes as low as 50 CFU/mL within 2 h without DNA amplification, and the average recovery in the spiked ham sausage samples can reach 92.6%. This system integrates the high sensitivity of magnetic sensing and high efficiency of hybridization reaction, providing a promising detection platform for pathogens.

Rapid determination of aflatoxin B1 by an automated immunomagnetic bead purification sample pretreatment method combined with high-performance liquid chromatography

We aimed to establish an automated versatile sample preconcentration method based on the modified immunomagnetic beads, which was utilized to enrich for aflatoxin B1 from the matrices. The critical main parameters affecting the extraction efficiency, such as usage amount of immunomagnetic beads, reaction time, elution time, and blending way were investigated. Under the optimized conditions, the content of aflatoxin B1 was analyzed by high-performance liquid chromatography, the mobile phase consists of water-acetonitrile-methanol (42:18:10, v/v/v), and fluorescence detection was performed with excitation and emission wavelengths at 360 and 440 nm, respectively. Moreover, the performance of preconcentration method was compared with the conventional method based on the immunoaffinity column. The accuracy of two clean-up methods was within the error range. In addition, the stability and recyclability of the immunomagnetic beads was studied by recycling them five times. The results for the respective analysis in various samples demonstrated that the developed extraction platform provides a promising approach that is simple, rapid, sensitive, and easy to use.

Magnetic Lateral Flow Immunoassays

A new generation of magnetic lateral flow immunoassays is emerging as powerful tool for diagnostics. They rely on the use of magnetic nanoparticles (MNP) as detecting label, replacing conventional gold or latex beads. MNPs can be sensed and quantified by means of external devices, allowing the development of immunochromatographic tests with a quantitative capability. Moreover, they have an added advantage because they can be used for immunomagnetic separation (IMS), with improvements in selectivity and sensitivity. In this paper, we have reviewed the current knowledge on magnetic-lateral flow immunoassay (LFIA), coupled with both research and commercially available instruments. The work in the literature has been classified in two categories: optical and magnetic sensing. We have analysed the type of magnetic nanoparticles used in each case, their size, coating, crystal structure and the functional groups for their conjugation with biomolecules. We have also taken into account the analytical characteristics and the type of transduction. Magnetic LFIA have been used for the determination of biomarkers, pathogens, toxins, allergens and drugs. Nanocomposites have been developed as alternative to MNP with the purpose of sensitivity enhancement. Moreover, IMS in combination with other detection principles could also improve sensitivity and limit of detection. The critical analysis in this review could have an impact for the future development of magnetic LFIA in fields requiring both rapid separation and quantification.

Yersinia pestis detection using biotinylated dNTPs for signal enhancement in lateral flow assays

Due to the extreme infectivity of Yersinia pestis it poses a serious threat as a potential biowarfare agent, which can be rapidly and facilely disseminated. A cost-effective and specific method for its rapid detection at extremely low levels is required, in order to facilitate a timely intervention for containment. Here, we report an ultrasensitive method exploiting a combination of isothermal nucleic acid amplification with a tailed forward primer and biotinylated dNTPs, which is performed in less than 30 min. The polymerase chain reaction (PCR) and enzyme linked oligonucleotide assay (ELONA) were used to optimise assay parameters for implementation on the LFA, and achieved detection limits of 45 pM and 940 fM using SA-HRP and SA-polyHRP, respectively. Replacing PCR with isothermal amplification, namely recombinase polymerase amplification, similar signals were obtained (314 fM), with just 15 min of amplification. The lateral flow detection of the isothermally amplified and labelled amplicon was then explored and detection limits of 7 fM and 0.63 fg achieved for synthetic and genomic DNA, respectively. The incorporation of biotinylated dNTPs and their exploitation for the ultrasensitive molecular detection of a nucleic acid target has been demonstrated and this generic platform can be exploited for a multitude of diverse real life applications.

Magnetic Particles: Their Applications from Sample Preparations to Biosensing Platforms

The growing interest in magnetic materials as a universal tool has been shown by an increasing number of scientific publications regarding magnetic materials and its various applications. Substantial progress has been recently made on the synthesis of magnetic iron oxide particles in terms of size, chemical composition, and surface chemistry. In addition, surface layers of polymers, silica, biomolecules, etc., on magnetic particles, can be modified to obtain affinity to target molecules. The developed magnetic iron oxide particles have been significantly utilized for diagnostic applications, such as sample preparations and biosensing platforms, leading to the selectivity and sensitivity against target molecules and the ease of use in the sensing systems. For the process of sample preparations, the magnetic particles do assist in target isolation from biological environments, having non-specific molecules and undesired molecules. Moreover, the magnetic particles can be easily applied for various methods of biosensing devices, such as optical, electrochemical, and magnetic phenomena-based methods, and also any methods combined with microfluidic systems. Here we review the utilization of magnetic materials in the isolation/preconcentration of various molecules and cells, and their use in various techniques for diagnostic biosensors that may greatly contribute to future innovation in point-of-care and high-throughput automation systems.

Streptavidin-exposed magnetic nanoparticles for lectin magnetic separation (LMS) of Staphylococcus aureus prior to three quantification strategies

A lectin magnetic separation (LMS) method for Staphylococcus aureus (S. aureus) was developed with the aim to improve the efficiency of magnetic nanoparticles and to expand the scope of bacterial recognition. Poly(ethylene glycol) (PEG)-mediated magnetic nanoparticles modified with streptavidin (MNP-PEG-SA) were synthesized and then applied to a two-step LMS based on the use of wheat germ agglutinin (WGA). Three specific methods for S. aureus detection (suitable for different requirements including detection time and sensitivity) were designed. The new LMS has improved anchoring efficiency (compared to two-step LMS methods) and requires a reduced number of magnetic particles. The Baird-Parker (B-P) method can detect S. aureus with a detection limit of 3 × 10⁰ CFU·mL^-1 within 15 h; the polymerase chain reaction (PCR) method can be finished within 4 h, with the lowest detection limit (LOD) of 3 × 10² CFU·mL^-1. The LOD of HRP-pig IgG-based colorimetric method is 3 × 10⁵ CFU·mL^-1, and the method only lasts for 2 h. If combined with specific detection methods, it meets different needs for rapid detection of S. aureus. Graphical abstractSchematic representation of lectin magnetic separation (LMS) based on biotin-wheat germ agglutinin (WGA) and poly (ethylene glycol) (PEG)-mediated streptavidin-modified magnetic nanoparticles (MNP-PEG-SA) and three different quantification strategies (including B-P culture assay, PCR assay, and colorimetric assay) for S. aureus.

The coupling of immunomagnetic enrichment of bacteria with paper-based platform

In this study, the coupling of magnetic enrichment of bacteria from real samples with rapid surface enhanced Raman spectroscopy (SERS) detection was reported. The selective isolation and enrichment for the model bacteria Escherichia coli (E. coli) was performed using E. coli (primary) antibody bound-magnetic gold (Fe₃O₄@Au) nanoparticles. Following isolation and enrichment, the rennet enzyme was used to cleave of casein modified Fe₃O₄/Au-PEI nanoparticles from primary antibody-bound bacteria to prevent the nanoparticle aggregation and provide the movement of bacteria on nitrocellulose membrane. In the first part of the study, optimization studies were carried out namely; the amounts of gold nanoparticles (AuNPs), polyethyleneimine coated magnetic gold (Fe₃O₄/Au-PEI) nanoparticles, casein and rennet enzyme. The SERS signals of DTNB (5,5'-Dithiobis(2-nitrobenzoic acid)) molecule were collected on the test line and a calibration curve was plotted by using signal intensities. The correlation between the concentration of E. coli and SERS signal was found to be linear within the range of 10¹-10⁷ cfu/mL (R² = 0.984, LOD = 0.52 cfu/mL and LOQ = 1.57 cfu/mL). The selectivity of the paper-based lateral flow immunoassay (LFIA) was examined with Bacillus subtilis (B. subtilis), Micrococcus luteus (M. luteus), Salmonella enteritidis (S. enteritidis) which did not produce any significant response compared with E. coli measurement. Finally, the developed paper-based LFIA was tested with urine and milk samples. The obtained SERS results were compared with a plate counting method results which were in a good accordance. The developed method was found as rapid and sensitive to E. coli with a total analysis time of less than 60 min.

Colorimetric Immunoassay for Rapid Detection of Vibrio parahemolyticus Based on Mn2+ Mediates the Assembly of Gold Nanoparticles

Vibrio parahemolyticus ( V. parahemolyticus) is an important food-borne pathogen that causes food poisoning and acute gastroenteritis in humans. Herein, a novel colorimetric immunoassay was presented for rapid detection of V. parahemolyticus using gold nanoparticles (18.1 nm diameter) as chromogenic substrate, whose combination of a magnetic bead-based sandwich immunoassay and an optical sensing system via Mn²⁺ ions mediated aggregation of gold nanoparticles. MnO₂ nanoparticles coated with polyclonal IgG antibodies (7.8 nm diameter) are used to recognize the target and can be etched to generate manganese ions by ascorbic acid. A color change ranging from red to purple to blue can be easily discerned by bare eye, corresponding to V. parahemolyticus concentration in the range between 10 and 10⁶ cfu·mL^-1. The proposed method possesses high specificity with a limit of detection of 10 cfu·mL^-1 and was successfully applied to determination of V. parahemolyticus in oyster samples without pre-enrichment. In our perception, it shows promise in rapid instrumental and on-site visual detection of V. parahemolyticus.