Three-dimensional porous self-assembled chestnut-like nickel-cobalt oxide structure as an electrochemical sensor for sensitive detection of hydrazine in water samples

Composite materials based on covalent organic frameworks for multiple advanced applications

Covalent organic frameworks (COFs) stand for a class of emerging crystalline porous organic materials, which are ingeniously constructed with organic units through strong covalent bonds. Their excellent design capabilities, and uniform and tunable pore structure make them potential materials for various applications. With the continuous development of synthesis technique and nanoscience, COFs have been successfully combined with a variety of functional materials to form COFs-based composites with superior performance than individual components. This paper offers an overview of the development of different types of COFs-based composites reported so far, with particular focus on the applications of COFs-based composites. Moreover, the challenges and future development prospects of COFs-based composites are presented. We anticipate that the review will provide some inspiration for the further development of COFs-based composites.

Aerosol-assisted nanostructuring of nickel/cobalt oxide thin films for viable electrochemical hydrazine sensing

Herein, we report the fabrication of NiO-CoO films for the electrochemical detection of hydrazine. An electrochemical sensor was devised where aerosol assisted chemical vapor deposition (AACVD) was employed as a nifty method for synthesizing NiO-CoO films over FTO electrodes. NiO-CoO-nanoparticle (NP) and NiO-CoO-nanowall (NW) films were fabricated over FTO substrates. The electrocatalytic analysis was performed in a standard three-electrode electrochemical setup. NiO-CoO-NW/FTO showed enhanced electro-oxidation for hydrazine at all concentrations tested. XRD, XPS, EDX, and FE-SEM techniques were used to characterize the structural, morphological, and elemental properties of NiO-CoO films. The results showed improved sensitivity, a large dynamic range, and good long-term stability of NiO-CoO-NW films. The amperometric response was used to measure the detection limit, and it was as low as 0.01 μM, and the sensitivity is ∼33 μA μM-1 cm-2. Besides, the NiO-CoO-NW/FTO electrodes showed significant selectivity towards hydrazine upon testing cross-sensitivity to other common interfering molecules. This strategy of using NiO-CoO-NW/FTO electrodes prepared via AACVD has great potential for the direct determination of hydrazine in environmental sensing applications.

Three-dimensional Nanoporous Cu-Doped Ni Coating as Bifunctional Electrocatalyst for Hydrazine Sensing and Hydrogen Evolution Reaction

Developing a cost-effective and efficient bifunctional electrocatalyst with simple synthesis strategy for hydrazine sensing and H evolution reaction (HER) is of utmost importance. Herein, a three-dimensional porous Cu-doped metallic Ni coating on Ti mesh (Ni(Cu) coating/TM) was successfully electrodeposited by a facile electrochemical method. Electrochemical etching of the electrodeposited Ni(Cu) coating with metallic Ni and Cu mixed phase on a Ti mesh contributed to the formation of a three-dimensional porous Cu-doped metallic Ni coating. Owing to the large specific surface area and enhanced electroconductivity caused by the porous structure and Cu doping, respectively, the developed Ni(Cu) coating/TM exhibited superior hydrazine sensing performance and electrocatalytic activity toward hydrogen evolution reaction (HER). The Ni(Cu) coating/TM electrode presented a good sensitivity of 3909μA mM^-1cm^-2and two relatively broad linear ranges from 0.004 mM to 2.915 mM and from 2.915 mM to 5.691 mM as well as a low detection limit of 1.90μM. In addition, the Ni(Cu) coating/TM required a relatively low HER overpotential of 140 mV to reach -10 mA cm^-2and exhibited robust durability in alkaline solution. The excellent hydrazine electrooxidation and HER performance guarantee its promising application in hydrazine detection and energy conversion.

Covalent organic frameworks (COFs) for electrochemical applications

Covalent organic frameworks are a class of extended crystalline organic materials that possess unique architectures with high surface areas and tuneable pore sizes. Since the first discovery of the topological frameworks in 2005, COFs have been applied as promising materials in diverse areas such as separation and purification, sensing or catalysis. Considering the need for renewable and clean energy production, many research efforts have recently focused on the application of porous materials for electrochemical energy storage and conversion. In this respect, considerable efforts have been devoted to the design and synthesis of COF-based materials for electrochemical applications, including electrodes and membranes for fuel cells, supercapacitors and batteries. This review article highlights the design principles and strategies for the synthesis of COFs with a special focus on their potential for electrochemical applications. Recently suggested hybrid COF materials or COFs with hierarchical porosity will be discussed, which can alleviate the most challenging drawback of COFs for these applications. Finally, the major challenges and future trends of COF materials in electrochemical applications are outlined.

A redox-active covalent organic framework for the efficient detection and removal of hydrazine

The removal and detection of soluble hydrazine is of importance due to its harm to soil and subterranean water, but challenging. Herein, we preferentially disposed a porous and redox active covalent-organic framework (DAAQ-TFP COF, denoted as DQ-COF) to simultaneously removal and detect hydrazine. Electroactive sites (anthraquinone units) can be intelligently incorporated into the channel walls/pores of COF. DQ-COF has high crystallinity and good thermal stability, and DQ-COF dropped onto nickel matrix (DQ-COF/Ni composite) still retains high surface area, characterized by PXRD, FT-IR, nitrogen adsorption and TGA. Subsequently, a detailed study of DQ-COF towards hydrazine uptake and detection potentials is explored. DQ-COF as adsorbent unfolds strong removal ability towards hydrazine, the maximum removal capacity of which is up to 1108 mg g^-1, following Friedrich and pseudo-second-order kinetic models. Meanwhile, the DQ-COF supported on nickel renders attractive electrochemical properties, which is efficiently responsive to hydrazine at a part per billion (ppb) level, coupled with a wide linear range (0.5 ˜ 1223 μM), low detection limit (0.07 μM) and high anti-interference ability. There is no other COFs with such a favorable capability in synchronous removal and selective detection towards hydrazine, probably applying in superintending water quality and disposing wastewater.

In situ generated chromophore as the indicator for background-free sensing strategy of hydrazine with high sensitivity with in vitro and in vivo applications

A background-free sensing assay for hydrazine was developed by using a fluorescent chromophore generated in situ as the signal indicator.

Three-dimensional interconnected Co(OH)2 nanosheets on Ti mesh as a highly sensitive electrochemical sensor for hydrazine detection

Three-dimensional interconnected Co(OH)₂ nanosheets on TM, prepared by low cost and simple electrodeposition method, exhibit highly sensitive electrochemical hydrazine detection.