Tutorial: Volumetric absorptive microsampling (VAMS)

Fingerprick volumetric absorptive microsampling for therapeutic drug monitoring of antiseizure medications: Reliability and real-life feasibility in epilepsy patients

Volumetric absorptive microsampling (VAMS) is increasingly proposed as a clinically reliable therapeutic drug monitoring (TDM) sampling methodology. The study aimed to establish the reliability and real-life feasibility of patient self-collected capillary VAMS for TDM of antiseizure medication (ASMs), using plasma ASMs concentrations from venous blood as a reference standard. Nurses collected venous and capillary blood samples using VAMS. Afterward, persons with epilepsy (PWE) performed VAMS sampling by themselves. All samples were analyzed by UHPLC-MS/MS. We performed a cross-validation study, comparing ASMs concentrations obtained by VAMS nurses and patients' self-collected versus plasma through Bland-Altman analysis and Passing-Bablok regression. We enrolled 301 PWE (M: F 42.5%:57.5%; mean age 44±16 years), treated with 13 ASMs, providing a total of 464 measurements. Statistical analysis comparing VAMS self-collected versus plasma ASMs concentrations showed a bias close to zero and slope and intercept values indicating a good agreement for CBZ, LCS, LEV, LTG, OXC, PB, and PHT, while a systematic difference between the two methods was found for VPA, PMP, TPM and ZNS. This is the first study showing the reliability and feasibility of the real-world application of PWE self-collected VAMS for most of the ASMs considered, giving a promising basis for at-home VAMS applications.

A miniaturized sample preparation method for routine elemental determination in whole blood using volumetric absorptive micro-sampling by ICP-QQQ

Volumetric absorptive micro-sampling (VAMS) has emerged as a simple and safe tool for collecting and storing blood samples in clinical and bioanalytical fields. This study presents a novel method for determining essential and non-essential trace elements (As, Be, Cd, Cs, Cu, Fe, Mg, P, Pb, S, Sb, Se, Tl, V, U) in VAMS-collected blood samples using microwave-assisted digestion with diluted acid as sample preparation method and an inductively coupled plasma triple quadrupole mass spectrometry (ICP-QQQ) as determination technique. While certain elements posed challenges due to VAMS tip background issues (Al, Ti, Cr, Mn, Co, Ni, Sn, Mo, Ba), the method demonstrated high precision and accuracy for the targeted analytes. It was demonstrated that 4.5 mol L-1 HNO3 plus 100 µL H2O2 30% (w/w) was suitable for an efficiency of digestion for further elemental determination using micro-analysis (spending less than 300 µL analytical solution) by ICP-QQQ, given that the residual carbon content (RCC) after the digestion procedure was lower than 5%. All the results higher than limit of quantification (LOQ) were in agreement with reference values for all analytes. Accuracy was assessed through reference material analysis and recovery tests using spiked samples. Moreover, suitable agreements (p > 0.05) between this method (VAMS-M) and the comparative method (liquid sampling method) were obtained for all analytes >LOQ. Furthermore, all results >LOQ showed good precision according to precision requirements (Horwitz equation). In this way, with the use of dilute acid, low dilution factor (30-fold), and excellent digestion efficiency (>95%), the proposed method was able to achieve an excellent detection limit, precision, and accuracy for 15 elements: As, Be, Cd, Cs, Cu, Fe, Mg, P, Pb, S, Sb, Se, Tl, V, and U using ICP-MS/MS, without the need for matrix-matched calibration curves. This research showcases an innovative analytical approach using VAMS for blood samples, offering biosafety, practicality, sensitivity, versatility, and robustness. This method contributes to the advancement of trace element analysis in biomedical research and clinical applications.

Evaluation of Patient-Centric Sample Collection Technologies for Pharmacokinetic Assessment of Large and Small Molecules

Low-volume sampling devices offer the promise of lower discomfort and greater convenience for patients, potentially reducing patient burden and enabling decentralized clinical trials. In this study, we determined whether low-volume sampling devices produce pharmacokinetic (PK) data comparable to conventional venipuncture for a diverse set of monoclonal antibodies (mAbs) and small molecules. We adopted an open-label, non-randomized, parallel-group, single-site study design, with four cohorts of 10 healthy subjects per arm. The study drugs, doses, and routes of administration included: crenezumab (15 mg/kg, intravenous infusion), etrolizumab (210 mg, subcutaneous), GDC-X (oral), and hydroxychloroquine (HCQ, 200 mg, oral). Samples were collected after administration of a single dose of each drug using conventional venipuncture and three low-volume capillary devices: TassoOne Plus for liquid blood, Tasso-M20 for dry blood, both applied to the arm, and Neoteryx Mitra® for dry blood obtained from fingertips. Serum/plasma concentrations from venipuncture and TassoOne Plus samples overlapped and PK parameters were comparable for all drugs, except HCQ. After applying a baseline hematocrit value, the dry blood concentrations and PK parameters for the two monoclonal antibodies were comparable to those obtained from venipuncture. For the two small molecules, two bridging strategies were evaluated for converting dry blood concentrations to equivalent plasma concentrations. A baseline hematocrit correction and/or linear regression-based correction was effective for GDC-X, but not for HCQ. Additionally, the study evaluated the bioanalytical data quality and comparability from the various collection methods, as well as patient preference for the devices.

Doxorubicin, doxorubicinol, cardiotoxicity, breast cancer, volumetric absorptive microsampling, LC-MS/MS

<b>Background and Objective:</b> Doxorubicin is an anticancer therapy belonging to the anthracycline class, which has clinical activity in breast cancer. Doxorubicin can cause cardiotoxic effects due to the formation of doxorubicinol as its main metabolite. The purpose of this study was to obtain the optimum sample preparation conditions for the analysis of doxorubicin in VAMS and as a form of therapeutic drug monitoring (TDM) in patients with cancer breasts. <b>Materials and Methods:</b> Analyze doxorubicin and doxorubicinol levels with Volumetric Absorptive Microsampling (VAMS) in patients' cancer breasts receiving doxorubicin in their therapeutic regimen. The sample was analyzed using Ultra Performance Liquid Chromatography tandem Mass Spectrometry (LC-MS/MS). The method uses deep linear range concentrations of 8-200 ng/mL for doxorubicin and 3-100 ng/mL for doxorubicinol. <b>Results:</b> Multiple reaction monitoring (MRM) value set at m/z 544.22>396.9 for doxorubicin; m/z 546.22>398.9 for doxorubicinol and m/z 528.5>362.95 for daunorubicin. The LLOQ value obtained was 8 ng/mL for doxorubicin and 3 ng/mL for doxorubicinol with linearity of 0.9904 for doxorubicin and 0.9902 for doxorubicinol. Analysis results show doxorubicin levels were in the range of 9.47 ng/mL to 87.84 ng/mL and doxorubicinol range between 4.24 and 54.02 ng/mL. <b>Conclusion:</b> Dosage cumulative doxorubicin ranges between 47.93 and 346.09 mg/m²; with this, the risk of cardiomyopathy in the patients surveyed is under 4%, according to the literature.

Effects of storage temperature and time on metabolite profiles measured in dried blood spots, dried blood microsamplers, and plasma

The practical advantages of capillary whole blood collection over venipuncture plasma collection for human exposome research are well known. However, before epidemiologists, clinicians, and public health researchers employ these microvolume sample collections, a rigorous evaluation of pre-analytical storage conditions is needed to develop protocols that maximize sample stability and reliability over time. Therefore, we performed a controlled experiment of dried whole blood collected on 10 μL Mitra microsamplers (DBM), 5-mm punches of whole blood from a dried blood spot (DBS), and 10 μL of plasma, and evaluated the effects of storage conditions at 4 °C, -20 °C, or -80 °C for up to 6 months on the resulting metabolite profiles measured with untargeted liquid chromatography-high resolution mass spectrometry (LC-HRMS). At -80 °C storage conditions, metabolite profiles from DBS, DBM, and plasma showed similar stability. While DBS and DBM metabolite profiles remained similarly stable at -20 °C storage, plasma profiles showed decreased stability at -20 °C compared to -80 °C storage. At refrigerated temperatures (4 °C), metabolite profiles collected on DBM were more stable than plasma or DBS, particularly for lipid classes. These results inform robust capillary blood sample storage protocols for DBM and DBS at potentially warmer temperatures than -80 °C, which may facilitate blood collections for populations outside of a clinical setting.

Validation of Mitra® VAMS® as a blood collection technique for trace elements analysis using ICP-MS/MS

Background: Clinical dosage of toxic and essential elements in blood is well established and the collection method is still by venipuncture. This method has drawbacks and is not suited for everyone. Volumetric absorptive microsampling (VAMS) has been shown to have advantages over venipuncture. Materials & methods: Using inductively coupled plasma tandem mass spectrometry, a method for quantifying elements in whole blood sampled on VAMS was developed/validated. Method's performance was assessed by comparison with whole blood results. Results: Validation and performance assessment tests tend to show that most of the targeted elements provides accurate and reproducible results comparing to a method of reference. Conclusion: Overall, VAMS presents good preliminary results to eventually become an alternative to venipuncture for blood sampling for some trace elements analysis purposes.

Microbiome metabolite quantification methods enabling insights into human health and disease

Many of the health-associated impacts of the microbiome are mediated by its chemical activity, producing and modifying small molecules (metabolites). Thus, microbiome metabolite quantification has a central role in efforts to elucidate and measure microbiome function. In this review, we cover general considerations when designing experiments to quantify microbiome metabolites, including sample preparation, data acquisition and data processing, since these are critical to downstream data quality. We then discuss data analysis and experimental steps to demonstrate that a given metabolite feature is of microbial origin. We further discuss techniques used to quantify common microbial metabolites, including short-chain fatty acids (SCFA), secondary bile acids (BAs), tryptophan derivatives, N-acyl amides and trimethylamine N-oxide (TMAO). Lastly, we conclude with challenges and future directions for the field.

Development and validation of a bioanalytical method for the quantification of methotrexate from serum and capillary blood using volumetric absorptive microsampling (VAMS) and on-line solid phase extraction (SPE) LC-MS

High-dose methotrexate is part of the polychemotherapy protocols for the treatment of Acute lymphoblastic leukaemia (ALL) with therapeutic drug monitoring (TDM) to adjust leucovorin rescue. An immunoassay is commonly used to analyse serum samples collected via venous blood sampling. However, immunoassays cannot distinguish between the parent drug and its metabolites. Besides, the blood volume required by venous blood sampling is high. Therefore, the aim of this project was to develop a fast, simple, reliable and cost-efficient micro sampling bioanalytical method using capillary blood to minimize the harm of children and to analyse both methotrexate and its metabolites. To achieve this aim, a LC-MS method with on-line solid phase extraction (SPE) for the simultaneous detection of methotrexate and its metabolites from capillary blood using volumetric-absorptive-microsampling (VAMS) technology was developed and fully validated. Besides, the method was also validated and modified for serum samples to compare the results with the immunoassay. A single-quadrupole MS detector was used for detection. Through the use of on-line SPE technology, a lower limit of quantitation of 0.03 µM for MTX and 7-OH-MTX and of 0.05 µM for DAMPA from a 10 μL capillary blood sample was achieved. The accuracy is between 90.0 and 104% and the precision between 4.7 and 12% for methotrexate and its metabolites, respectively. Because of the cross reactivity of the immunoassay a cross-validation was not successful. Besides, a correlation factor of 0.46 for MTX between plasma and whole-blood was found. A fast, simple, reliable and cost-efficient extraction and analysis LC-MS method could be developed and validated, which is applicable in ambulatory and clinical care.

Revolutionizing Blood Collection: Innovations, Applications, and the Potential of Microsampling Technologies for Monitoring Metabolites and Lipids

Blood serves as the primary global biological matrix for health surveillance, disease diagnosis, and response to drug treatment, holding significant promise for personalized medicine. The diverse array of lipids and metabolites in the blood provides a snapshot of both physiological and pathological processes, with many routinely monitored during conventional wellness checks. The conventional method involves intravenous blood collection, extracting a few milliliters via venipuncture, a technique limited to clinical settings due to its dependence on trained personnel. Microsampling methods have evolved to be less invasive (collecting ≤150 µL of capillary blood), user-friendly (enabling self-collection), and suitable for remote collection in longitudinal studies. Dried blood spot (DBS), a pioneering microsampling technique, dominates clinical and research domains. Recent advancements in device technology address critical limitations of classical DBS, specifically variations in hematocrit and volume. This review presents a comprehensive overview of state-of-the-art microsampling devices, emphasizing their applications and potential for monitoring metabolites and lipids in blood. The scope extends to diverse areas, encompassing population studies, nutritional investigations, drug discovery, sports medicine, and multi-omics research.

Utilization of volumetric absorptive microsampling and dried plasma spot for quantification of anti-fungal triazole agents in pediatric patients by using liquid chromatography-tandem mass spectrometry

BACKGROUND

Recently, increasing attention has been paid to the use of microsampling techniques for therapeutic drug monitoring (TDM) in neonatal and pediatric populations. Volumetric Absorptive Microsampling (VAMS) has been introduced in the market under the name Mitra® (Neoteryx). These devices consist of porous absorbent tips that allow collection of fixed blood volumes (10-30 µL) to overcome the DBS-related hematocrit effect. Here, the authors analyzed the concentrations of triazole agents (voriconazole, posaconazole, and isavuconazole) in VAMS and dried plasma spot (DPS) samples.

METHODS

Fifty whole blood samples were obtained from pediatric patients subjected to systemic anti-fungal therapy. VAMS were collected by dipping the tip into whole blood before centrifugation for plasma recovery. Then, 30 µL of plasma was carefully spotted on filter paper to obtain DPS. Anti-fungal concentrations were measured using a validated LC-MS/MS kit (MassTox® Antimycotic Drugs/EXTENDED) provided by Chromsystems (Chromsystems Instruments & Chemicals). Drug concentrations in VAMS and DPS samples were compared to those in fresh plasma using Passing-Bablok and Bland-Altman tests.

RESULTS

Plasma concentrations of voriconazole, posaconazole, and isavuconazole were positively and significantly correlated with those obtained in VAMS and DPS samples (Spearman r range, 0.82-0.94, p < 0.001). Data were further analyzed using the Bland-Altman test, which showed a % mean difference compared to fresh plasma of -15.06-10.98 (range). The stability of both VAMS and DPS was ensured for at least 14 d at room temperature.

CONCLUSIONS

These results demonstrate that VAMS and DPS can be used for the TDM of anti-fungal agents. Owing to their stability, both sampling devices can be easily stored and shipped, without the need for refrigeration, to TDM laboratories that facilitate remote TDM applications. Finally, VAMS could be particularly suitable for pediatric and neonatal patients because they allow the collection of a few microliters of blood, thus improving ethical and compliance limitations.

Volumetric absorptive microsampling for the therapeutic drug monitoring of psychiatric patients treated with cariprazine

Psychiatric disorders are usually treated with antipsychotic agents belonging to different pharmacological and chemical classes, the most recent ones collectively known as "third-generation antipsychotics", such as cariprazine, approved in 2015 for the treatment of patients affected by schizophrenia. For these patients, a frequent therapeutic drug monitoring (TDM) becomes essential to assess compliance and to optimise and personalise their therapy, also due to cariprazine interindividual variability and narrow therapeutic range. In this study, a bioanalytical method featuring miniaturised sampling and pretreatment was developed, based on volumetric absorptive microsampling (VAMS) for TDM of psychiatric patients under cariprazine treatment and compared to a reference method based on fluid plasma analysis. Minimally invasive whole blood VAMS was coupled to an original instrumental method based on ultra-high performance liquid chromatography hyphenated to mass spectrometry (UHPLC-MS). A feasible and streamlined, yet reliable VAMS pretreatment protocol was carefully optimised and the VAMS-UHPLC-MS methodology was validated with satisfactory results in terms of linearity (r2 > 0.9970 in the 1.5-100 ng/mL range), precision (%RSD < 11.7), extraction yield (> 90.0 %) and matrix effect (8.2 ≤ %RE ≤ 10.9). Finally, the microsampling approach coupled to UHPLC-MS was successfully applied to the TDM of psychiatric patients treated with cariprazine and compared with standard fluid plasma analysis, providing reliable quali-quantitative results, and proving to be readily applicable to the clinical practice in TDM programs as a useful alternative to cariprazine plasma analysis. This is the first report of a successful microsampling application, and in particular the first report of VAMS application, for the TDM of cariprazine.

Clinical Bridging Studies and Modeling Approach for Implementation of a Patient Centric Sampling Technique in Padsevonil Clinical Development

Volumetric absorptive microsampling (VAMS) techniques have gained popularity these last years as innovative tool for collection of blood pharmacokinetic (PK) samples in clinical trials as they offer many advantages over dried blood spot and conventional venous blood sampling. The use of Mitra®, a blood collection device based on volumetric absorptive microsampling (VAMS) technology, was implemented during clinical development of padsevonil (PSL), an anti-seizure medication (ASM) candidate. The present study describes the approach used to bridge plasma (obtained from conventional venous blood sampling) and blood exposures (obtained with Mitra®) to support the use of Mitra as sole blood PK sampling method in clinical trials. Paired blood (using Mitra®) and plasma samples (using conventional venous blood sampling) were collected in healthy volunteers as well as in patients with epilepsy. PSL concentration in plasma and blood were analyzed using different approaches which included evaluation of blood-to-plasma ratios (B/P) over time, linear regression, Bland-Altman analysis as well as development of a linear-mixed effect model based on clinical pharmacology studies. Results showed that the observed in vivo B/P and the measured bias between the 2 collection methods were consistent with the measured in vitro B/P. Graphical analysis demonstrated a clear time effect on the B/P which was confirmed in the linear mixed effect model with sampling time identified as significant covariate. Finally, the built-in model was validated using independent datasets and was shown to adequately predict plasma concentration based on blood concentration with a mean bias of less than 9% (predicted versus observed plasma concentration).

Volumetric Absorptive Microsampling in the Analysis of Endogenous Metabolites

Volumetric absorptive microsampling (VAMS) has arisen as a relevant tool in biological analysis, offering simplified sampling procedures and enhanced stability. Most of the attention VAMS has received in the past decade has been from pharmaceutical research, with most of the published work employing VAMS targeting drugs or other exogenous compounds, such as toxins and pollutants. However, biomarker analysis by employing blood microsampling has high promise. Herein, a comprehensive review on the applicability of VAMS devices for the analysis of endogenous metabolites/biomarkers was performed. The study presents a full overview of the analysis process, incorporating all the steps in sample treatment and validation parameters. Overall, VAMS devices have proven to be reliable tools for the analysis of endogenous analytes with biological importance, often offering improved analyte stability in comparison with blood under ambient conditions as well as a convenient and straightforward sample acquisition model.

Analytical and Clinical Validation of Assays for Volumetric Absorptive Microsampling (VAMS) of Drugs in Different Blood Matrices: A Literature Review

Volumetric absorptive microsampling (VAMS) is the newest and most promising sample-collection technique for quantitatively analyzing drugs, especially for routine therapeutic drug monitoring (TDM) and pharmacokinetic studies. This technique uses an absorbent white tip to absorb a fixed volume of a sample (10-50 µL) within a few seconds (2-4 s), is more flexible, practical, and more straightforward to be applied in the field, and is probably more cost-effective than conventional venous sampling (CVS). After optimization and validation of an analytical method of a drug taken by VAMS, a clinical validation study is needed to show that the results by VAMS can substitute what is gained from CVS and to justify implementation in routine practice. This narrative review aimed to assess and present studies about optimization and analytical validation of assays for drugs taken by VAMS, considering their physicochemical drug properties, extraction conditions, validation results, and studies on clinical validation of VAMS compared to CVS. The review revealed that the bio-analysis of many drugs taken with the VAMS technique was optimized and validated. However, only a few clinical validation studies have been performed so far. All drugs that underwent a clinical validation study demonstrated good agreement between the two techniques (VAMS and CVS), but only by Bland-Altman analysis. Only for tacrolimus and mycophenolic acid were three measurements of agreement evaluated. Therefore, VAMS can be considered an alternative to CVS in routine practice, especially for tacrolimus and mycophenolic acid. Still, more extensive clinical validation studies need to be performed for other drugs.

Biological Fluid Microsampling for Therapeutic Drug Monitoring: A Narrative Review

Therapeutic drug monitoring (TDM) is a specialized area of laboratory medicine which involves the measurement of drug concentrations in biological fluids with the aim of optimizing efficacy and reducing side effects, possibly modifying the drug dose to keep the plasma concentration within the therapeutic range. Plasma and/or whole blood, usually obtained by venipuncture, are the "gold standard" matrices for TDM. Microsampling, commonly used for newborn screening, could also be a convenient alternative to traditional sampling techniques for pharmacokinetics (PK) studies and TDM, helping to overcome practical problems and offering less invasive options to patients. Although technical limitations have hampered the use of microsampling in these fields, innovative techniques such as 3-D dried blood spheroids, volumetric absorptive microsampling (VAMS), dried plasma spots (DPS), and various microfluidic devices (MDS) can now offer reliable alternatives to traditional samples. The application of microsampling in routine clinical pharmacology is also hampered by the need for instrumentation capable of quantifying analytes in small volumes with sufficient sensitivity. The combination of microsampling with high-sensitivity analytical techniques, such as liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), is particularly effective in ensuring high accuracy and sensitivity from very small sample volumes. This manuscript provides a critical review of the currently available microsampling devices for both whole blood and other biological fluids, such as plasma, urine, breast milk, and saliva. The purpose is to provide useful information in the scientific community to laboratory personnel, clinicians, and researchers interested in implementing the use of microsampling in their routine clinical practice.

Volumetric absorptive microsampling as an effective microsampling technique for LC-MS/MS bioanalysis of biomarkers in drug discovery

Aim: Develop and validate a volumetric absorptive microsampling (VAMS)-based LC-MS/MS method to support the bioanalysis of amino acid and carboxylic acid biomarkers in mouse whole blood. Method: Mouse whole blood was collected using a 10 μl VAMS device. The analytes in VAMS were extracted and analyzed using an LC-MS/MS method. Results: The VAMS-based LC-MS/MS assay exhibited a linearity range of 10.0-10,000 ng/ml with acceptable precision and accuracy and consistent recovery. The analyte stability in mouse whole blood VAMS was shown for 7 days at ambient conditions and at -80°C, as well as with three freeze/thaw cycles. Conclusion: A simple and robust VAMS-based LC-MS/MS method was developed and further validated for simultaneous bioanalysis of nine biomarkers in mouse whole blood.

Microsampling and enantioselective liquid chromatography coupled to mass spectrometry for chiral bioanalysis of novel psychoactive substances

In this paper, the development of efficient enantioselective HPLC methods for the analysis of five benzofuran-substituted phenethylamines, two substituted tryptamines, and three substituted cathinones is described. For the first time, reversed-phase (eluents made up with acidic water-methanol solutions) and polar-ionic (eluent made up with an acetonitrile-methanol solution incorporating both an acidic and a basic additive) conditions fully compatible with mass spectrometry (MS) detectors were applied with a chiral stationary phase (CSP) incorporating the (+)-(18-crown-6)-tetracarboxylic acid chiral selector. Enantioresolution was achieved for nine compounds with α and R_S factors up to 1.32 and 5.12, respectively. Circular dichroism (CD) detection, CD spectroscopy in stopped-flow mode and quantum mechanical (QM) calculations were successfully employed to investigate the absolute stereochemistry of mephedrone, methylone and butylone and allowed to establish a (R)<(S) enantiomeric elution order for these compounds on the chosen CSP. Whole blood miniaturized samples collected by means of volumetric absorptive microsampling (VAMS) technology and fortified with the target analytes were extracted following an optimized protocol and effectively analysed by means of an ultra-high performance liquid chromatography-MS system. By this way a proof-of-concept procedure was applied, demonstrating the suitability of the method for quali-quantitative enantioselective assessment of the selected psychoactive substances in advanced biological microsamples. VAMS microsamplers including a polypropylene handle topped with a small tip of a polymeric porous material were used and allowed to volumetrically collect small aliquots of whole blood (10 μL) independently from its density. Highly appreciable volumetric accuracy (bias, in the -8.7-8.1% range) and precision (% CV, in the 2.8-5.9% range) turned out.

Self-Collection Blood Test for PFASs: Comparing Volumetric Microsamplers with a Traditional Serum Approach

A remote sampling approach was developed at Eurofins for quantifying per- and polyfluoroalkyl substances (PFASs) in whole blood samples collected using volumetric absorptive microsamplers (VAMSs), which allow for self-collection of blood using a finger prick. This study compares PFAS exposure measured by self-collection of blood using VAMSs to the standard venous serum approach. Blood samples were collected from participants (n = 53) in a community with prior PFAS drinking water contamination using a venous blood draw as well as participant self-collection using VAMSs. Whole blood from the venous tubes was also loaded onto VAMSs to compare differences in capillary vs venous whole blood PFAS levels. Samples were quantified for PFASs using liquid chromatography tandem mass spectrometry and online solid-phase extraction. PFAS levels in serum were highly correlated with measurements in capillary VAMSs (r ≥ 0.91 and p < 0.05). Serum PFAS levels were generally twofold higher than whole blood, reflecting expected differences in their composition. Of interest, FOSA was detected in whole blood (both venous and capillary VAMSs) but not in serum. Overall, these findings indicate that VAMSs are useful self-collection tools for assessing elevated human exposure to PFASs.

Volumetric Absorptive Microsampling for the Therapeutic Drug Monitoring of Everolimus in Patients Who Have Undergone Liver Transplant

BACKGROUND

Therapeutic drug monitoring (TDM) of everolimus is required to prevent organ rejection in patients who have undergone transplant. Volumetric absorptive microsampling (VAMS) is a minimally invasive method for accurately collecting a small amount of blood from a patient's fingers. This study aimed to assess the applicability of VAMS for TDM of everolimus.

METHODS

VAMS and venous blood samples were collected from 45 liver transplant recipients who had been receiving stable everolimus doses for at least 7 days. Whole blood everolimus concentrations were measured using ultrahigh performance liquid chromatography with tandem mass spectrometry. Deming regression and Bland-Altman analysis were performed to compare everolimus concentrations measured using VAMS (C VAMS ) and venous blood samples (C IV ). The regression coefficient (r 2 ) between C VAMS and C IV was calculated using a linear regression. The effects of the hematocrit and blood sampling time on the difference between C VAMS and C IV were investigated.

RESULTS

Thirty-two participants were included in the final analysis. The Deming regression line was C IV = 1.04 × C VAMS + 0.55 [95% confidence interval (CI) of slope, 0.91-1.18; 95% CI of intercept, -0.05 to 1.16]. C VAMS and C IV were strongly correlated (r 2 = 0.92), with no proportional or constant bias. The mean difference between C VAMS and C IV was -0.79 ng/mL, with the 95% limit of agreement ranging from -2.55 to 0.97 ng/mL in a Bland-Altman plot. No effect of the hematocrit or blood sampling time was observed.

CONCLUSIONS

VAMS and venous blood sampling showed good agreement for the measurement of whole blood everolimus concentrations. Less invasive VAMS can substitute for more invasive venous blood sampling in the TDM of everolimus in liver transplant patients.

Method development for the quantification of lead levels in whole blood sampled on Mitra® with VAMS® tips by inductively coupled plasma-MS/MS

Background: Lead is harmful for humans by having adverse effects on different biological systems. Venepuncture is the gold standard for blood lead level analysis, but this method has many flaws. The goal of this research was to develop and validate a more practical approach for blood sampling. Materials & methods: Mitra^® devices based on VAMS^® and inductively coupled plasma-MS/MS technologies were employed. Performance evaluation of the newly developed method was also performed by comparing it versus a commonly used method at the Centre de Toxicologie du Québec for blood lead level analysis. Results: Comparison showed no signs of significant difference between the two methods. Conclusion: VAMS may be a useful alternative sampling approach for further research on blood lead analysis and possibly for many other trace elements.

Applications of Volumetric Absorptive Microsampling Technique: A Systematic Critical Review

METHODS

A novel microsampling device called Volumetric Absorptive microsampling (VAMS), developed in 2014, appears to have resolved the sample inhomogeneity inherent to dried blood spots, with improved precision in the volume of sample collected for measuring drug concentration. A literature search was conducted to identify several analytical and pharmacokinetic studies that have used VAMS in recent years.

RESULTS

The key factors for proper experimental design and optimization of the extraction of drugs and metabolites of interest from the device were summarized. This review focuses on VAMS and elaborates on bioanalytical factors, method validation steps, and scope of this technique in clinical practice.

CONCLUSIONS

The promising microsampling method VAMS is especially suited for conducting pharmacokinetic studies with very small volumes of blood, especially in special patient populations. Clinical validation of every VAMS assay must be conducted prior to the routine practical implementation of this method.

Validation and application of volumetric absorptive microsampling (VAMS) dried blood method for phenylalanine measurement in patients with phenylketonuria

BACKGROUND

Frequent blood phenylalanine (Phe) measurement is required for phenylketonuria (PKU) patients for diagnosis and disease status monitoring. Though various methods are available for blood Phe measurement, there is a lack of validated quantitative methods for measuring Phe with less than 15% variability. A method to allow at home blood sample collection for the PKU community is in high demand.

METHODS

A volumetric absorptive microsampling (VAMS) dried blood collection high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method was developed and fully validated for blood Phe measurement in compliance with regulatory guidances. The method accuracy, precision, stability, selectivity, matrix and hematocrit effects were assessed. A venous plasma collection HPLC-MS/MS method was developed and validated as a reference method. 311 matching VAMS and plasma samples were collected from 24 PKU subjects in a Phase 2 clinical study. Phe measurements using the two methods were compared.

RESULTS

Both VAMS and the plasma sample collection methods met the acceptance criteria for Good Laboratory Practice (GLP) bioanalytical analysis. Comparisons showed a high Pearson's correlation of 0.9813. The Passing-Bablok analysis showed that the difference was estimated to be less than 5% and Bland Altman analysis indicated that the difference was proportional with Phe concentration and for the majority of samples (88.85%) the measurement was within ±20% difference. Following 7 days treatment with 60 or 20 mg/kg/day PTC923 (Sepiapterin) or 20 mg/kg/day sapropterin, PKU patients exhibited respectively -206.4, -146.9, and -91.5 µmol/L reductions of blood Phe as measured by the VAMS method.

CONCLUSIONS

Concordant results were obtained using VAMS and plasma methods, which demonstrated that VAMS is a reliable method for clinical applications to monitor blood Phe for PKU patients.

Microsampling tools for collecting, processing, and storing blood at the point-of-care

In the wake of the COVID-19 global pandemic, self-administered microsampling tools have reemerged as an effective means to maintain routine healthcare assessments without inundating hospitals or clinics. Finger-stick collection of blood is easily performed at home, in the workplace, or at the point-of-care, obviating the need for a trained phlebotomist. While the initial collection of blood is facile, the diagnostic or clinical utility of the sample is dependent on how the sample is processed and stored prior to transport to an analytical laboratory. The past decade has seen incredible innovation for the development of new materials and technologies to collect low-volume samples of blood with excellent precision that operate independently of the hematocrit effect. The final application of that blood (i.e., the test to be performed) ultimately dictates the collection and storage approach as certain materials or chemical reagents can render a sample diagnostically useless. Consequently, there is not a single microsampling tool that is capable of addressing every clinical need at this time. In this review, we highlight technologies designed for patient-centric microsampling blood at the point-of-care and discuss their utility for quantitative sampling as a function of collection material and technique. In addition to surveying methods for collecting and storing whole blood, we emphasize the need for direct separation of the cellular and liquid components of blood to produce cell-free plasma to expand clinical utility. Integrating advanced functionality while maintaining simple user operation presents a viable means of revolutionizing self-administered microsampling, establishing new avenues for innovation in materials science, and expanding access to healthcare.

A targeted UHPLC-MS/MS method to monitor lipidomic changes during a physical effort: optimization and application to blood microsamples from athletes

In recent years, lipidomics have been widely developed to try to better understand many diseases or physical conditions. In this study, the aim was to evaluate the possibility to conduct reliable lipidomic studies using hemaPEN® microsampling devices. Targeted lipidomic analysis was applied to investigate the impact of a short and intense physical activity on lipids blood concentration. HemaPEN® microsampling device was used to easily collect several samples directly on an athletics track. This device allows the accurate collection of four blood samples (2.74 µL each) in a non-invasive way and without any specific skills. In this study, nineteen healthy volunteers aged from 19 to 27 were included. Participants ran 400 m warm-up and 1600 m as fast as possible. Blood samples were collected at five different time points. One sample was collected before the exercise, two during the physical activity and two after. An extraction process as well as an ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) method were optimized to follow-up 11 compounds in these small volumes of blood. Blood concentration of five out of the eleven targeted analytes were significantly influenced by the physical exercise. Blood concentration of arachidonic acid, sphingosine and lactic acid were significantly increased after exercise, while concentration of 14:0 lysophosphatidylcholine and 18:1 lysophosphatidylcholine were significantly decreased.

Fully soluble polymeric foams for in-vial dried blood spot collection and analysis of acidic drugs by capillary electrophoresis

Polymeric foams tailor-made of polyvinylpyrrolidone (PVP) and carboxymethylcellulose/oxidized 6-carboxycellulose (CMC07/OC) composite were proposed as suitable sorbents for the collection and analysis of dried blood spots (DBSs). The PVP and CMC07/OC foams were easy to prepare, enabled collection of minute volumes of capillary blood, and blood drying at ambient temperature. The resulting foams were prepared as small porous discs with uniform dimensions (approx. 6 × 3 mm) and were fully soluble in aqueous solutions. The DBSs were formed in standard capillary electrophoresis (CE) vials fitted with the soluble foam discs and enabled the direct in-vial DBS processing and at-line analysis by CE. The DBSs were pretreated with a simple process, which involved a complete dissolution of the foam disc in an acidic solution and a simultaneous hollow fiber liquid-phase microextraction (HF-LPME) in one step. The complete solubility of the foam disc with the DBS served for a quantitative transfer of all blood components into the eluate and a nearly exhaustive HF-LPME of target analytes, whereas the blood matrix and the polymeric foam components were efficiently retained by the organic solvent impregnated in the walls of the HF. The suitability of the PVP and CMC07/OC foams for the collection and the direct analysis of DBSs was demonstrated by the HF-LPME/CE determination of model acidic drugs (warfarin, ibuprofen, naproxen, ketoprofen, and diclofenac) at therapeutically relevant concentrations. Repeatability of the analytical method was better than 8.1% (RSD), extraction recoveries ranged from 70 to 99% (for PVP foam), calibration curves were linear over two orders of magnitude (R² higher than 0.9991), and limits of detection were less than 44 μg/L (for concentrations in undiluted capillary blood). The soluble polymeric foams exhibited non-significant variations in analyte concentrations for DBSs prepared from blood samples with different hematocrit levels and for aged DBSs (less than 9.2%), moreover, they outperformed standard DBS sampling devices in terms of sample pretreatment time and extraction recovery.

VAMS-Based Blood Capillary Sampling for Mass Spectrometry-Based Human Metabolomics Studies

Volumetric absorptive microsampling (VAMS) is a recently developed sample collection method that enables single-drop blood collection in a minimally invasive manner. Blood biomolecules can then be extracted and processed for analysis using several analytical platforms. The integration of VAMS with conventional mass spectrometry (MS)-based metabolomics approaches is an attractive solution for human studies representing a less-invasive procedure compared to phlebotomy with the additional potential for remote sample collection. However, as we recently demonstrated, VAMS samples require long-term storage at -80 °C. This study investigated the stability of VAMS samples during short-term storage and compared the metabolome obtained from capillary blood collected from the fingertip to those of plasma and venous blood from 22 healthy volunteers. Our results suggest that the blood metabolome collected by VAMS samples is stable at room temperature only for up to 6 h requiring subsequent storage at -80 °C to avoid significant changes in the metabolome. We also demonstrated that capillary blood provides better coverage of the metabolome compared to plasma enabling the analysis of several intracellular metabolites presented in red blood cells. Finally, this work demonstrates that with the appropriate pre-analytical protocol capillary blood can be successfully used for untargeted metabolomics studies.

Therapeutic Drug Monitoring of Tacrolimus Based on Volumetric Absorptive Microsampling Technique (VAMS) in Renal Transplant Pediatric Recipients-LC-MS/MS Method Development, Hematocrit Effect Evaluation, and Clinical Application

Tacrolimus (TAC) is post-transplant pharmacotherapy's most widely used immunosuppressant. In routine clinical practice, frequent uncomfortable venipuncture is necessary for whole-blood (WB) collection to check trough TAC levels. Volumetric absorptive microsampling (VAMS) is an alternative strategy to WB collection. In this study, we aimed to validate and develop a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for TAC quantification in WB and VAMS samples. After extraction with water and protein precipitation, the samples were directly analyzed using LC-MS/MS. Whole-blood and VAMS capillary-blood samples were collected from 50 patients treated with TAC during the follow-up visits. The cross-correlation between the developed methods was evaluated using Passing-Bablok regression and a Bland-Altman bias plot. The matrix effect (ME) and carry-over were insignificant for both scenarios. There was a high correlation between the processes and no significant clinical deviation. LC-MS/MS methods were successfully developed and validated in the 0.5-60 ng/mL calibration range. This study demonstrated and confirmed the utility of VAMS-based TAC monitoring in the pediatric population. This is the first study to directly develop and validate the VAMS LC-MS/MS method for evaluating the hematocrit effect in the pediatric population. The statistical correlation between immunochemical and VAMS-based methods was satisfactory.

Volumetric Absorptive Microsampling in Therapeutic Drug Monitoring of Immunosuppressive Drugs-From Sampling and Analytical Issues to Clinical Application

Miniaturisation and simplification are novel approaches in clinical bioanalysis, especially in therapeutic drug monitoring (TDM). These contemporary trends are related to the sampling, pre-treatment, and analysis of biological fluids. Currently, dried blood spot (DBS), one of the most popular microsampling techniques, is feasible and inexpensive. However, obtaining reliable results with sample homogeneity and volume variability is difficult. Volumetric Absorptive Microsampling (VAMS) has recently enabled the accurate and precise collection of a fixed blood volume. It reduced the hematocrit effect, improved volumetric accuracy, and generated results correlating with the dose and drug exposure from wet blood. This review focuses on VAMS-Mitra™ devices, which have become increasingly important since 2014, mainly for TDM and toxicology studies. First, the current literature has been reviewed based on immunosuppressants and their determination in samples obtained using Mitra™. Second, the critical points, weaknesses, and strengths have been characterized in contrast to classic venipuncture and other microsampling methods. Finally, we indicate the points of attention according to the perspective of Mitra™ as well as its usefulness in clinical practice. VAMS is currently state-of-the-art in microsampling and seems to be a good instrument for improving adherence to immunosuppressive therapy, especially in the pediatric population.

A Volumetric Absorptive Microsampling UPLC-MS/MS Method for Simultaneous Quantification of Tacrolimus, Mycophenolic Acid and Creatinine in Whole Blood of Renal Transplant Recipients

(1) Background: Continuous monitoring of tacrolimus (TAC), mycophenolic acid (MPA), and creatinine (Cre) after renal transplantation is vitally important. In this study, we developed a new method based on volumetric absorptive microsampling (VAMS) combined with Ultra Performance Liquid Chromatography−Tandem Mass Spectrometry (UPLC-MS/MS) to simultaneously quantify three analytes including TAC, MPA, and Cre in whole blood. (2) Methods: The VAMS-based UPLC-MS/MS assay used a shared extraction and a single injection to simultaneously quantify the included TAC, MPA, and Cre. Development and validation were carried out following the Food and Drug Administration and European Medicines Agency guidelines for the validation of bioanalytical methods. Moreover, clinical validation for the three analytes was performed in both dried blood spot (DBS) and VAMS. Furthermore, a willingness survey was conducted using the system usability scale (SUS) for renal transplant recipients. (3) Results: The assay was successfully validated for all analytes. No interference, carryover, or matrix effects were observed, and extraction recoveries and process efficiencies were >90.00%. Analysis was unaffected by hematocrit (0.20~0.60, L/L) and anticoagulants (EDTA-2K). Dried VAMS samples were stable for 7 days at ambient temperature and stable for at least 1 month at −20 °C. During clinical validation, the measured TAC, corrected MPA, and Cre concentrations of VAMS samples met the analytical standards (95.00%, 88.57%, and 92.50%). When more stringent clinical acceptance criteria were set, the results obtained by VAMS (90.00%, 71.43%, and 85.00%) better than DBS (77.50%, 62.86%, and 70.00%). Compared with DBS, the survey found that renal transplant recipients are more inclined to use VAMS. (4) Conclusions: A robust extraction and UPLC-MS/MS analysis method in VAMS tips was developed and fully validated for the simultaneous quantification of TAC, MPA, and Cre concentrations. This method provides analytical support for the one-sample remote monitoring of both immunosuppressive drug concentrations and renal function in allo-renal recipients. Based on the good consistency between this method and the routine detection of venous blood samples and higher patient satisfaction than DBS, we believe that VAMS sampling can be a better alternative to venous whole-blood sampling.

Volumetric Absorptive Microsampling (VAMS) for Targeted LC-MS/MS Determination of Tryptophan-Related Biomarkers

L-Tryptophan (TRP) metabolites and related biomarkers play crucial roles in physiological functions, and their imbalances are implicated in central nervous system pathologies and neurodegenerative diseases such as amyotrophic lateral sclerosis (ALS), Alzheimer’s disease, Parkinson’s disease, schizophrenia and depression. The measurement of TRP metabolites and related biomarkers possesses great potential to elucidate the disease mechanisms, aid preclinical drug development, highlight potential therapeutic targets and evaluate the outcomes of therapeutic interventions. An effective, straightforward, sensitive and selective liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed for the simultaneous determination of 24 TRP-related compounds in miniaturised murine whole blood samples. Sampling and sample pretreatment miniaturisation were achieved thanks to the development of a volumetric dried blood microsampling approach. Volumetric absorptive microsampling (VAMS) allows the accurate sampling of microvolumes of blood with advantages including, but not limited to, minimal sampling invasiveness, logistical improvements, method sustainability in terms of solvents and energy consumption, and improvement of animal studies in the framework of the 3Rs (Replacement, Reduction and Refinement) principles on animal welfare. The VAMS-LC-MS/MS method exhibited good selectivity, and correlation coefficient values for the calibration curves of each analyte were >0.9987. The limits of quantitation ranged from 0.1 to 25 ng/mL. The intra- and inter-day precisions in terms of RSD were <9.6%. All analytes were stable in whole blood VAMS samples stored at room temperature for at least 30 days with analyte losses < 14%. The developed method was successfully applied to the analysis of biological samples from mice, leading to the unambiguous determination of all the considered target analytes. This method can therefore be applied to analyse TRP metabolites and related biomarkers levels to monitor disease states, perform mechanistic studies and investigate the outcomes of therapeutic interventions.

Development and validation of a UPLC-MS/MS method with volumetric absorptive microsampling to quantitate cyclophosphamide and 4-hydroxycyclophosphamide

Cyclophosphamide (CP) is an anti-cancer alkylating prodrug, metabolized by CYP450 into its active metabolite 4-hydroxycyclophosphamide (4-OHCP). Its therapeutic effectiveness is determined by the 4-OHCP concentration. Several analytical methods in plasma and dried blood spots have been developed to analyze cyclophosphamide and 4-OHCP; however, there are many disadvantages. The objective of this study was to develop and validate the ultraperformance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method by volumetric absorptive microsampling (VAMS) and 4-hydroxycyclophosphamide-d4 (4-OHCP-d4) as an internal standard. VAMS requires small sample volumes, and it is not affected by the hematocrit values; therefore, it is an efficient sampling method. The samples were derivatized with 5 μL semicarbazide hydrochloride (SCZ) and 25 μL of the resulting 4-OHCP-SCZ; 4-OHCP-d4-SCZ derivatives were absorbed by VAMS and extracted by protein precipitation. The optimum conditions were obtained using the Waters Acquity® UPLC BEH C18 (2.1 × 100 mm; 1.7 μm) column; flow rate 0.15 ml/min; mobile phase 0.01% formic acid and methanol; gradient elution mode for 6 min by positive electrospray ionization; and multiple reaction monitoring of m/z 260.7 &gt; 140.0 for CP, 333.7 &gt; 221.0 for 4-OHCP-SCZ, and 337.7 &gt; 225.1 for 4-OHCP-d4-SCZ. The method met the validation requirements set by the FDA. The cyclophosphamide LLOQ value was 5 ng/mL, and the calibration curve range was 5—60,000 ng/ml. Furthermore, the 4-OHCP LLOQ value was 2.5 ng/ml, and the calibration curve range was 2.5—1,000 ng/ml.

Advanced Microsamples: Current Applications and Considerations for Mass Spectrometry-Based Metabolic Phenotyping Pipelines

Microsamples are collections usually less than 50 µL, although all devices that we have captured as part of this review do not fit within this definition (as some can perform collections of up to 600 µL); however, they are considered microsamples that can be self-administered. These microsamples have been introduced in pre-clinical, clinical, and research settings to overcome obstacles in sampling via traditional venepuncture. However, venepuncture remains the sampling gold standard for the metabolic phenotyping of blood. This presents several challenges in metabolic phenotyping workflows: accessibility for individuals in rural and remote areas (due to the need for trained personnel), the unamenable nature to frequent sampling protocols in longitudinal research (for its invasive nature), and sample collection difficulty in the young and elderly. Furthermore, venous sample stability may be compromised when the temperate conditions necessary for cold-chain transport are beyond control. Alternatively, research utilising microsamples extends phenotyping possibilities to inborn errors of metabolism, therapeutic drug monitoring, nutrition, as well as sport and anti-doping. Although the application of microsamples in metabolic phenotyping exists, it is still in its infancy, with whole blood being overwhelmingly the primary biofluid collected through the collection method of dried blood spots. Research into the metabolic phenotyping of microsamples is limited; however, with advances in commercially available microsampling devices, common barriers such as volumetric inaccuracies and the ‘haematocrit effect’ in dried blood spot microsampling can be overcome. In this review, we provide an overview of the common uses and workflows for microsampling in metabolic phenotyping research. We discuss the advancements in technologies, highlighting key considerations and remaining knowledge gaps for the employment of microsamples in metabolic phenotyping research. This review supports the translation of research from the ‘bench to the community’.

Mercury biomonitoring in German adults using volumetric absorptive microsampling

Mercury (Hg) is a global pollutant and a danger to human health. Human biomonitoring of Hg using a dried blood matrix instead of venous blood sampling for exposure assessment is of growing interest. This study aims to develop, validate, and evaluate the application of volumetric absorptive microsampling (VAMS) for Hg biomonitoring in humans. Sampling, drying, and storage conditions were evaluated during method development. Storage in pre-cleaned glass vials after drying for 2 h in a desiccator ensured analyte stability for at least 4 weeks. Sixty-eight paired capillary VAMS and venous blood samples from volunteers in Munich, Germany, were used for method validation. Hg levels in VAMS and venous blood samples were determined by direct mercury analysis. The limits of detection and quantitation for VAMS were 0.18 and 0.61 µg/l, respectively. However, sensitivity could be improved by using two microsamples for analysis instead of one. Hg levels in VAMS samples correlated very well with Hg levels in venous blood samples (R² = 0.958). Furthermore, VAMS showed a high accuracy (median recovery: 117%) and precision (median relative standard deviation: 8.7%), especially for Hg concentrations above 1.0 µg/l. In fact, accuracy and precision of VAMS improved with increasing Hg concentrations. In conclusion, VAMS in combination with direct mercury analysis is an accurate and viable alternative for human biomonitoring of Hg.

Automated Sequential Injection-Capillary Electrophoresis for Dried Blood Spot Analysis: A Proof-of-Concept Study

A hyphenated analytical platform that enables fully automated analyses of dried blood spots (DBSs) is proposed by the at-line coupling of sequential injection (SI) to capillary electrophoresis (CE). The SI system, exploited herein for the first time for unattended DBS handling, serves as the "front end" mesofluidic platform for facilitating exhaustive elution of the entire DBS by flow programming. The DBS eluates are thus free from hematocrit and nonhomogeneity biases. The SI pump transfers the resulting DBS eluates into CE sample vials through an internal port of the CE instrument and homogenizes the eluates, whereupon the eluted blood compounds are automatically injected, separated, and quantified by the CE instrument. The SI and CE are commercially available off-the-shelf instruments and are interconnected through standard nuts, ferrules, and tubing without additional instrumental adjustments. They are controlled by dedicated software and are synchronized for a fully autonomous operation. The direct determination of endogenous (potassium and sodium) and exogenous (lithium as a model drug) inorganic cations in DBS samples has been used for the proof-of-concept demonstration. The hyphenated SI-CE platform provides excellent precision of the analytical method with relative standard deviation (RSD) values of peak areas below 1.5 and 3.5% for intraday and interday analyses, respectively, of the endogenous concentrations of the two inorganic cations. For the determination of lithium, calibration is linear in a typical clinical range of the drug (R² better than 0.9993 for 2-20 mg/L), RSD values of peak areas are below 4.5% (in the entire calibration range), the limit of detection (0.4 mg/L) and the limit of quantification (1.3 mg/L) are well below the drug's minimum therapeutic concentration (4 mg/L), and total analysis time is shorter than 5 min. The SI-CE platform reflects the actual trends in the automation of analytical methods, offers rapid and highly flexible DBS elution/analysis processes, and might thus provide a general solution to modern clinical analysis as it can be applied to a broad range of analytes and dried biological materials.

Current development of bioanalytical sample preparation techniques in pharmaceuticals

Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity. Competent sample preparation to extract the desired analytes and remove redundant components is a crucial step in each bioanalytical approach. The matrix effect is a key hurdle in bioanalytical sample preparation, which has gained extensive consideration. Novel sample preparation techniques have advantages over classical techniques in terms of accuracy, automation, ease of sample preparation, storage, and shipment and have become increasingly popular over the past decade. Our objective is to provide a broad outline of current developments in various bioanalytical sample preparation techniques in chromatographic and spectroscopic examinations. In addition, how these techniques have gained considerable attention over the past decade in bioanalytical research is mentioned with preferred examples. Modern trends in bioanalytical sample preparation techniques, including sorbent-based microextraction techniques, are primarily emphasized.

•

Bioanalytical sampling techniques are described with suitable applications in pharmaceuticals.

•

The pros and cons of each bioanalytical sampling techniques are described.

•

Relevant biological matrices are outlined.

Volumetric absorptive microsampling as a suitable tool to monitor tyrosine kinase inhibitors

Therapeutic drug monitoring (TDM) of tyrosine kinase inhibitors (TKIs) shows significant potential in guiding personalized anticancer treatment. Dried blood microsampling could be a valuable alternative for traditional plasma sampling to provide TDM results faster and to reach a wider audience. Sample collection is easy and patient friendly as only a small volume of blood is collected via a fingerprick. This enables the possibility of home sampling by the patients themselves. Therefore, an LC-MS/MS method was developed and validated for the quantification of bosutinib, dasatinib, gilteritinib, ibrutinib, imatinib, midostaurin, nilotinib and ponatinib in dried blood samples collected via volumetric absorptive microsampling (VAMS). A VAMS device collects a fixed volume of blood (± 10 µL), irrespective of the sample's hematocrit (Hct). During method validation, special attention was paid to the possible impact of Hct (range 0.18-0.55) on matrix effect (ME), robustness of the extraction, and accuracy of the method. The method was successfully validated based on international guidelines in terms of calibration curves, precision (within-run CV 2.20-14.8%; between-run CV 2.40-12.3%), accuracy (within-run bias 0.34-12.5%; between-run bias -0.15 to 16.2%), carry-over and selectivity. IS-compensated ME and recovery were Hct independent and no significant impact of Hct on the accuracy of the TKI quantifications was observed. All TKIs were stable in VAMS samples stored at -20 °C, 4 °C and room temperature for at least 4 weeks and for 2 days at 60 °C (except ibrutinib). Lastly, we demonstrated a good agreement between liquid blood obtained from patients on TKI treatment and VAMS samples prepared from that venous blood. As this implies that there is no methodological impact of liquid versus dried blood analysis, the presented method can be applied in clinical follow-up studies for determining TKIs in (capillary) VAMS samples with varying Hct levels.

Dried Volumetric Microsampling Approaches for the Therapeutic Drug Monitoring of Psychiatric Patients Undergoing Clozapine Treatment

Clozapine is one of the most widely used second-generation antipsychotic drugs (SGAs) for the treatment of schizophrenia. Despite advantages over first-generation drugs, clozapine still shows significant side effects and interindividual variations in efficacy. In order to ensure frequent therapeutic drug monitoring (TDM) and improve the compliance of psychiatric patients undergoing clozapine treatment, two novel dried microsampling approaches based on whole blood and plasma volumetric absorptive microsampling (b-VAMS and p-VAMS) and microfluidic generated-dried blood spot technology (mfDBS) were developed and coupled to HPLC with electrochemical detection (ED). The proposed miniaturized strategies by means of VAMS and microfluidic channel-based devices provide several advantages in terms of collection, storage, and handling compared to classical blood and plasma processing. Satisfactory validation results were obtained for all microsampling platforms, with mean extraction yields >85.1%, precision as relative standard deviation (RSD) < 5.1%, and stability < 4.5% analyte loss after 30 days for p-VAMS; mean extraction yields > 83.4%, precision RSD < 5.4%, and stability < 4.6% analyte loss after 30 days for b-VAMS, and mean extraction yields > 74.0%, precision RSD < 5.6%, and stability < 4.9% analyte loss after 30 days for mfDBS. The original microsampling methodologies have been successfully applied to the blood and plasma collected from five psychiatric patients for the monitoring of the levels of clozapine and its main metabolites, providing robust and reliable quali-quantitative results. Comparisons between results of the two dried microsampling technologies with those obtained by classic fluid plasma analysis were in good agreement and have demonstrated that the proposed miniaturized approaches could be suitable for TDM purposes.

Thresholds for blood transfusion in extremely preterm infants: A review of the latest evidence from two large clinical trials

There are two recently completed large randomized clinical trials of blood transfusions in the preterm infants most at risk of requiring them. Liberal and restrictive strategies were compared with composite primary outcome measures of death and neurodevelopmental impairment. Infants managed under restrictive guidelines fared no worse in regard to mortality and neurodevelopment in early life. The studies had remarkably similar demographics and used similar transfusion guidelines. In both, there were fewer transfusions in the restrictive arm. Nevertheless, there were large differences between the studies in regard to transfusion exposure with almost 3 times the number of transfusions per participant in the transfusion of prematures (TOP) study. Associated with this, there were differences between the studies in various outcomes. For example, the combined primary outcome of death or neurodevelopmental impairment was more likely to occur in the TOP study and the mortality rate itself was considerably higher. Whilst the reasons for these differences are likely multifactorial, it does raise the question as to whether they could be related to the transfusions themselves? Clearly, every effort should be made to reduce exposure to transfusions and this was more successful in the Effects of Transfusion Thresholds on Neurocognitive Outcomes (ETTNO) study. In this review, we look at factors which may explain these transfusion differences and the differences in outcomes, in particular neurodevelopment at age 2 years. In choosing which guidelines to follow, centers using liberal guidelines should be encouraged to adopt more restrictive ones. However, should centers with more restrictive guidelines change to ones similar to those in the studies? The evidence for this is less compelling, particularly given the wide range of transfusion exposure between studies. Individual centers already using restrictive guidelines should assess the validity of the findings in light of their own transfusion experience. In addition, it should be remembered that the study guidelines were pragmatic and acceptable to a large number of centers. The major focus in these guidelines was on hemoglobin levels which do not necessarily reflect tissue oxygenation. Other factors such as the level of erythropoiesis should also be taken into account before deciding whether to transfuse.

Developing a Nationwide Infrastructure for Therapeutic Drug Monitoring of Targeted Oral Anticancer Drugs: The ON-TARGET Study Protocol

Simple Summary

Relationships between drug concentrations in blood and efficacy and/or toxicity have been reported for up to 80% of oral anticancer drugs (OADs). Most OADs exhibit highly variable drug concentrations at the approved dose. This may result in a significant proportion of patients with suboptimal drug concentrations. Therapeutic Drug Monitoring (TDM), which is dose optimization based on measured drug concentrations, can be used to personalize drug dosing with the overall goal to improve the benefit-risk ratio of anticancer drug treatment. The ON-TARGET study aims to investigate the feasibility of TDM in patients receiving either axitinib or cabozantinib for the treatment of renal-cell carcinoma with the main objective to improve severe tyrosine kinase inhibitor associated toxicity. Additionally, the feasibility of volumetric absorptive microsampling (VAMS), a novel minimally invasive and easy to handle blood sampling technique, for TDM sample collection is investigated.

Abstract

Exposure-efficacy and/or exposure-toxicity relationships have been identified for up to 80% of oral anticancer drugs (OADs). Usually, OADs are administered at fixed doses despite their high interindividual pharmacokinetic variability resulting in large differences in drug exposure. Consequently, a substantial proportion of patients receive a suboptimal dose. Therapeutic Drug Monitoring (TDM), i.e., dosing based on measured drug concentrations, may be used to improve treatment outcomes. The prospective, multicenter, non-interventional ON-TARGET study (DRKS00025325) aims to investigate the potential of routine TDM to reduce adverse drug reactions in renal cell carcinoma patients receiving axitinib or cabozantinib. Furthermore, the feasibility of using volumetric absorptive microsampling (VAMS), a minimally invasive and easy to handle blood sampling technique, for sample collection is examined. During routine visits, blood samples are collected and sent to bioanalytical laboratories. Venous and VAMS blood samples are collected in the first study phase to facilitate home-based capillary blood sampling in the second study phase. Within one week, the drug plasma concentrations are measured, interpreted, and reported back to the physician. Patients report their drug intake and toxicity using PRO-CTCAE-based questionnaires in dedicated diaries. Ultimately, the ON-TARGET study aims to develop a nationwide infrastructure for TDM for oral anticancer drugs.

TELEmedicine for EPIlepsy Care (TELE-EPIC): protocol of a randomised, open controlled non-inferiority clinical trial

INTRODUCTION

Epilepsy is a chronic condition requiring consistent follow-up aimed at seizure control, and monitoring of anti-seizure medication (ASM) levels and side effects. Telemedicine (TM) offers invaluable support to patient follow-up, guaranteeing the prompt availability of a team of experts for persons with epilepsy (PWE) widely distributed across the country. Although many health institutions have endorsed the use of TM, robust data on effectiveness, safety and costs of TM applied to epilepsy are lacking. TELEmedicine for EPIlepsy Care (TELE-EPIC) will evaluate the effectiveness of video consultation (VC) via TM compared with usual care (UC) for the monitoring of PWE (TELE-EPIC_RCT). Moreover, TELE-EPIC will apply an innovative Volumetric Absorptive Microsampling (VAMS) device for quantitation of ASM through finger prick blood sampling as an alternative to venipuncture sampling (TELE-EPIC_VAMS).

METHODS AND ANALYSIS

TELE-EPIC_RCT is a multicentre, open, pragmatic two-arm randomised controlled trial prospectively including adult and paediatric outpatients with established diagnosis of epilepsy consecutively attending the Epilepsy Centres of Bologna and Rome, respectively. The primary outcome is the non-inferiority of VC on seizure control compared with UC after an 18-month follow-up. Secondary outcomes are adherence to treatment, ASM-related adverse events, quality of life, mood disorders, patient and caregiver satisfaction, safety and costs. TELE-EPIC_VAMS is a cross-validation study for blood ASM quantitation through a novel, VAMS-based device, comparing (1) VAMS versus plasma samples (reference standard method); and (2) nurse-collected versus self-collected blood by VAMS device.

ETHICS AND DISSEMINATION

The study has been approved by the local ethics committee (349-2019-SPER-AUSLBO). Complete information about the state of project, relevant events and results will be regularly updated on the project's webpage on ClinicalTrials.gov. The project's results and data on the potential impact of TM in epilepsy will be disseminated on social media. A closeout meeting will be convened for the communication and dissemination of the project, highlighting its main achievements and impacts.

TRIAL REGISTRATION NUMBER

NCT04496310.

Volumetric absorptive microsampling: its use in COVID-19 research and testing

COVID-19 led to changes in the way blood samples are collected. As societies were isolated to control viral spread, access to facilities became limited. Remote sample collection with a volumetric microsampling approach, using Mitra® devices based on VAMS® technology, proved to be highly effective. It allowed people to collect high-quality samples at home and post them to a laboratory. This enabled scientists to conduct large serosurveillance studies, with results showing that seroprevalence of COVID-19 was higher than initially expected. Furthermore, remote microsampling studies by several institutions were conducted to measure the relationship between antigen levels and antibody response and duration. VAMS technology was also used in COVID-19 clinical trials. In summary, the independent research reviewed in this paper proved that VAMS is an effective sample collection alternative.

Ion-Channel Antiepileptic Drugs: An Analytical Perspective on the Therapeutic Drug Monitoring (TDM) of Ezogabine, Lacosamide, and Zonisamide

The term seizures includes a wide array of different disorders with variable etiology, which currently represent one of the most important classes of neurological illnesses. As a consequence, many different antiepileptic drugs (AEDs) are currently available, exploiting different activity mechanisms and providing different levels of performance in terms of selectivity, safety, and efficacy. AEDs are currently among the psychoactive drugs most frequently involved in therapeutic drug monitoring (TDM) practices. Thus, the plasma levels of AEDs and their metabolites are monitored and correlated to administered doses, therapeutic efficacy, side effects, and toxic effects. As for any analytical endeavour, the quality of plasma concentration data is only as good as the analytical method allows. In this review, the main techniques and methods are described, suitable for the TDM of three AEDs belonging to the class of ion channel agents: ezogabine (or retigabine), lacosamide, and zonisamide. In addition to this analytical overview, data are provided, pertaining to two of the most important use cases for the TDM of antiepileptics: drug–drug interactions and neuroprotection activity studies. This review contains 146 references.

Dried blood sample analysis by antibody array across the total testing process

Dried blood samples (DBSs) have many advantages; yet, impediments have limited the clinical utilization of DBSs. We developed a novel volumetric sampling device that collects a precise volume of blood, which overcomes the heterogeneity and hematocrit issues commonly encountered in a traditional DBS card collection as well as allowing for more efficient extraction and processing procedures and thus, more efficient quantitation, by using the entire sample. We also provided a thorough procedure validation using this volumetric DBS collection device with an established quantitative proteomics analysis method, and then analyzed 1000 proteins using this approach in DBSs concomitantly with serum for future consideration of utility in clinical applications. Our data provide a first step in the establishment of a DBS database for the broad application of this sample type for widespread use in clinical proteomic and other analyses applications.

Validation of LC-MS/MS method for determination of rosuvastatin concentration in human blood collected by volumetric absorptive microsampling (VAMS)

In light of the shift toward patient-centric clinical trials, a measure of simplifying blood collection process and minimizing the volume of blood samples is on the rise. Volumetric absorptive microsampling (VAMS) is a microsampling device developed for blood sampling in non-hospital settings, which enables accurate hematocrit-independent collection of 10 or 20 µL of whole blood with a simple finger prick. In this study, liquid chromatography (LC)-tandem mass spectrometry workflow for quantification of rosuvastatin after VAMS sampling was developed and validated. The VAMS sample was stabilized by matrix drying and the optimum LC conditions and extraction methods were used to reach adequate sensitivity with lower limit of quantification verified at 1 ng/mL in 10 µL of blood. The bioanalytical method to quantify rosuvastatin from 1 to 100 ng/mL in VAMS sample was qualified by specificity, carryover, linearity, within-run and between-run reproducibility and stability. Inaccuracy was less than ± 6% and imprecision was less than 10% after analyzing the samples on 5 different days at all concentration levels. In addition, the feasibility of delivery to the analytical laboratory after home sampling during the guaranteed stability period of 10 days at room temperature was confirmed by evaluating concentration changes after VAMS sampling without adding pH buffer. Our results suggest that VAMS sampling did not have an effect on the stability of rosuvastatin, and it is a viable option for simple and accurate blood collection at home.

Dried matrix spots in forensic toxicology

Dried matrix spots (DMS) has gained the attention of different professionals in different fields, including toxicology. Investigations have been carried out in order to assess the potential of using DMS for the analysis of illicit substances, the main interest of forensic toxicologists. This technique uses minimal volumes of samples and solvents, resulting in simple and rapid extraction procedures. Furthermore, it has proved to increase analyte stability, improving storage and transportation. However, DMS presents some limitations: the hematocrit influencing accuracy and inconsistencies regarding the means of spotting samples and adding internal standard on paper. Thus, we provide an overview of analytical methodologies with forensic applications focusing on drugs of abuse and discussing the main particularities, limitations and achievements.

Solutions for hematocrit bias in dried blood spot hormone analysis

Over the last years, dried blood spot (DBS) sampling has gained significant interest due to development of analytical techniques combined with DBS, the simplicity and low cost of the method. Despite its wide use, DBS sampling can lead to inaccurate results due to the impact of the hematocrit (Hct) on the analysis. Some analytes have shown to be hardly impacted by Hct values. However, in other cases, a significant impact of Hct is observed, which requires the use of alternative approaches to circumvent this issue. This review describes the possible impact of Hct-related bias in DBS sampling in the context of hormone analysis and discusses the different methodologies that can be used to overcome this bias to ensure accurate results.