Ti3C2Tx MXene/urchin-like PANI hollow nanosphere composite for high performance flexible ammonia gas sensor

Noninvasive Diagnosis of Early-Stage Chronic Kidney Disease and Monitoring of the Hemodialysis Process in Clinical Practice via Exhaled Breath Analysis Using an Ultrasensitive Flexible NH3 Sensor Assisted by Pattern Recognition

To achieve the early diagnosis of chronic kidney disease (CKD), noninvasive hemodialysis monitoring, and accurate determination of dialysis duration and adequacy, a noninvasive, point-of-care, user-friendly device should be developed. Here, a flexible, room temperature NH3 gas sensor sensitive to the key breath biomarkers of CKD─NH3 and creatinine─was fabricated. The sensor had detection limits of 100 ppb for NH3 and 1 ppm for creatinine. Clinically, a total of 96 exhaled breath samples, half from 39 CKD patients and the other half from 48 healthy controls were collected and analyzed. With the assistance of a pattern recognition algorithm , the early diagnosis of CKD was achieved by the sensor, with PCA being used due to sensor's cross-sensitivity to CKD biomarkers. Diagnostic models distinguishing CKD versus non-CKD and early-stage CKD versus advanced-stage CKD were constructed using the SVM algorithm, achieving an overall accuracy of 0.93 and 0.94, with area under the curve (AUC) values of 0.97 and 0.99 for all subjects in receiver operating characteristic (ROC) analysis, respectively. The hemodialysis processes of patients were monitored in real-time, with the sensor response values exhibiting ideal exponential decay over time. The sensor response values showed a strong positive correlation with serum creatinine levels (r = 0.85) and a moderate positive correlation with blood urea nitrogen levels (r = 0.62), both of which are key clinical diagnostic indicators for CKD. These are good results, as 54% of CKD samples are from early-stage CKD patients. These results suggest that the sensor could serve as a noninvasive alternative to traditional blood tests for renal function evaluation and CKD diagnosis. Overall, this sensor demonstrates great potential in clinical practice for early diagnosis of CKD, monitoring the daily health status of CKD patients, optimizing the dialysis schedule, and monitoring the dialysis process in real-time.

Real-Time and Wireless Transmission of a Nitrogen-Doped Ti3C2Tx Wearable Gas Sensor for Efficient Detection of Food Spoilage and Ammonia Leakage

With the rising popularity of smart homes, there is an urgent need for devices that can perform real-time online detection of ammonia (NH3) concentrations for food quality measurement. In addition, timely warning is crucial to preventing individual deaths from NH3. However, few studies can realize continuous monitoring of NH3 with high stability and subsequent application validation. Herein, we report on an integrated device equipped with a nitrogen-doped Ti3C2Tx gas sensor that shows great potential in detecting food spoilage and NH3 leakage. The nitrogen doping results in the lattice misalignment of Ti3C2Tx, subsequently realizing effective barrier height modulation and enhanced charge transfer efficiency of nitrogen-doped Ti3C2Tx. Density functional theory calculations confirm the greatly enhanced adsorption of NH3 on nitrogen-doped Ti3C2Tx. Our work can inspire the design of efficient gas sensors for real-time and wireless detection of food spoilage and NH3 leakage.

High versatility of polyethylene terephthalate (PET) waste for the development of batteries, biosensing and gas sensing devices

Continuously growing adoption of electronic devices in energy storage, human health and environmental monitoring systems increases demand for cost-effective, lightweight, comfortable, and highly efficient functional structures. In this regard, the recycling and reuse of polyethylene terephthalate (PET) waste in the aforementioned fields due to its excellent mechanical properties and chemical resistance is an effective solution to reduce plastic waste. Herein, we review recent advances in synthesis procedures and research studies on the integration of PET into energy storage (Li-ion batteries) and the detection of gaseous and biological species. The operating principles of such systems are described and the role of recycled PET for various types of architectures is discussed. Modifying the composition, crystallinity, surface porosity, and polar surface functional groups of PET are important factors for tuning its features as the active or substrate material in biological and gas sensors. The findings indicate that conceptually new pathways to the study are opened up for the effective application of recycled PET in the design of Li-ion batteries, as well as biochemical and catalytic detection systems. The current challenges in these fields are also presented with perspectives on the opportunities that may enable a circular economy in PET use.

Advancements in MXene Composite Materials for Wearable Sensors: A Review

In recent years, advancements in the Internet of Things (IoT), manufacturing processes, and material synthesis technologies have positioned flexible sensors as critical components in wearable devices. These developments are propelling wearable technologies based on flexible sensors towards higher intelligence, convenience, superior performance, and biocompatibility. Recently, two-dimensional nanomaterials known as MXenes have garnered extensive attention due to their excellent mechanical properties, outstanding electrical conductivity, large specific surface area, and abundant surface functional groups. These notable attributes confer significant potential on MXenes for applications in strain sensing, pressure measurement, gas detection, etc. Furthermore, polymer substrates such as polydimethylsiloxane (PDMS), polyurethane (PU), and thermoplastic polyurethane (TPU) are extensively utilized as support materials for MXene and its composites due to their light weight, flexibility, and ease of processing, thereby enhancing the overall performance and wearability of the sensors. This paper reviews the latest advancements in MXene and its composites within the domains of strain sensors, pressure sensors, and gas sensors. We present numerous recent case studies of MXene composite material-based wearable sensors and discuss the optimization of materials and structures for MXene composite material-based wearable sensors, offering strategies and methods to enhance the development of MXene composite material-based wearable sensors. Finally, we summarize the current progress of MXene wearable sensors and project future trends and analyses.

MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces. One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials. MXenes, a new family of 2D nanomaterials, have been drawing attention since the last decade due to their high electronic conductivity, processability, mechanical robustness and chemical tunability. In this review, we encompass the fabrication of MXene-based polymeric nanocomposites, their structure-property relationship, and applications in the flexible sensor domain. Moreover, our discussion is not only limited to sensor design, their mechanism, and various modes of sensing platform, but also their future perspective and market throughout the world. With our article, we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

H2S/Butane Dual Gas Sensing Based on a Hydrothermally Synthesized MXene Ti3C2Tx/NiCo2O4 Nanocomposite

Real-time sensing of hydrogen sulfide (H2S) at room temperature is important to ensure the safety of humans and the environment. Four kinds of different nanocomposites, such as MXene Ti3C2Tx, Ti3AlC2, WS2, and MoSe2/NiCo2O4, were synthesized using the hydrothermal method in this paper. Initially, the intrinsic properties of the synthesized nanocomposites were studied using different techniques. P-type butane and H2S-sensing behaviors of nanocomposites were performed and analyzed deeply. Four sensor sheets were fabricated using a spin-coating method. The gas sensor was distinctly part of the chemiresistor class. The MXene Ti3C2Tx/NiCo2O4-based gas sensor detected the highest response (16) toward 10 ppm H2S at room temperature. In comparison, the sensor detected the highest response (9.8) toward 4000 ppm butane at 90 °C compared with the other three fabricated sensors (Ti3AlC2, WS2, and MoSe2/NiCo2O4). The MXene Ti3C2Tx/NiCo2O4 sensor showed excellent responses, minimum limits of detection (0.1 ppm H2S and 5 ppm butane), long-term stability, and good reproducibility compared with the other fabricated sensors. The highest sensing properties toward H2S and butane were accredited to p-p heterojunctions, higher BET surface areas, increased oxygen species, etc. These simply synthesized nanocomposites and fabricated sensors present a novel method for tracing H2S and butane at the lowest concentration to prevent different gas-exposure-related diseases.

Room Temperature Chemiresistive Gas Sensors Based on 2D MXenes

Owing to their large surface area, two-dimensional (2D) semiconducting nanomaterials have been extensively studied for gas-sensing applications in recent years. In particular, the possibility of operating at room temperature (RT) is desirable for 2D gas sensors because it significantly reduces the power consumption of the sensing device. Furthermore, RT gas sensors are among the first choices for the development of flexible and wearable devices. In this review, we focus on the 2D MXenes used for the realization of RT gas sensors. Hence, pristine, doped, decorated, and composites of MXenes with other semiconductors for gas sensing are discussed. Two-dimensional MXene nanomaterials are discussed, with greater emphasis on the sensing mechanism. MXenes with the ability to work at RT have great potential for practical applications such as flexible and/or wearable gas sensors.

Room-temperature chemiresistive ammonia sensors based on 2D MXenes and their hybrids: recent developments and future prospects

Detection of ammonia (NH3) gas at room temperature is essential in a variety of sectors, including pollution monitoring, commercial safety and medical services, etc. Two-dimensional (2D) materials have emerged as fascinating candidates for gas-sensing applications due to their distinct properties. MXenes, a type of 2D transition metal carbides/nitrides/carbonotrides, have drawn the interest of researchers due to their high conductivity, large surface area, and changing surface chemistry. The review begins by describing the NH3 gas-detecting methods of 2D materials and then concentrates on MXene-based sensors, emphasising the benefits that MXenes provide in this context. The study also explains the prime factors involved in evaluating sensor performance, which include sensor response, sensitivity, selectivity, stability, charge transfer values, adsorption energy and response/recovery times. Subsequently, the review covers two main categories: pristine/intercalated MXenes and MXene-based hybrid materials. The review investigates the approaches for improving the sensing characteristics of pristine and intercalated MXenes by introducing MXene hybrids like MXene-metal oxide hybrids, MXene-transition metal dichalcogenides hybrid, MXene-other 2D materials hybrid, MXene-polymers and other hybrids and other MXene-derived materials. In summary, this review offers a thorough overview of current advancements and potential applications for room-temperature ammonia sensors based on 2D MXenes and their hybrids. In order to pave the way for future improvements in MXene-based gas-sensing technology for room temperature ammonia detection, the study concludes by outlining potential future scope and conclusions.

Application of Titanium Carbide MXenes in Chemiresistive Gas Sensors

The titanium carbide MXenes currently attract an extreme amount of interest from the material science community due to their promising functional properties arising from the two-dimensionality of these layered structures. In particular, the interaction between MXene and gaseous molecules, even at the physisorption level, yields a substantial shift in electrical parameters, which makes it possible to design gas sensors working at RT as a prerequisite to low-powered detection units. Herein, we consider to review such sensors, primarily based on Ti3C2Tx and Ti2CTx crystals as the most studied ones to date, delivering a chemiresistive type of signal. We analyze the ways reported in the literature to modify these 2D nanomaterials for (i) detecting various analyte gases, (ii) improving stability and sensitivity, (iii) reducing response/recovery times, and (iv) advancing a sensitivity to atmospheric humidity. The most powerful approach based on designing hetero-layers of MXenes with other crystals is discussed with regard to employing semiconductor metal oxides and chalcogenides, noble metal nanoparticles, carbon materials (graphene and nanotubes), and polymeric components. The current concepts on the detection mechanisms of MXenes and their hetero-composites are considered, and the background reasons for improving gas-sensing functionality in the hetero-composite when compared with pristine MXenes are classified. We formulate state-of-the-art advances and challenges in the field while proposing some possible solutions, in particular via employing a multisensor array paradigm.

MXene-Based Nanomaterials for Multifunctional Applications

MXene is becoming a "rising star" material due to its versatility for a wide portfolio of applications, including electrochemical energy storage devices, electrocatalysis, sensors, biomedical applications, membranes, flexible and wearable devices, etc. As these applications promote increased interest in MXene research, summarizing the latest findings on this family of materials will help inform the scientific community. In this review, we first discuss the rapid evolutionary change in MXenes from the first reported M₂XT_x structure to the last reported M₅X₄T_x structure. The use of systematically modified synthesis routes, such as foreign atom intercalation, tuning precursor chemistry, etc., will be further discussed in the next section. Then, we review the applications of MXenes and their composites/hybrids for rapidly growing applications such as batteries, supercapacitors, electrocatalysts, sensors, biomedical, electromagnetic interference shielding, membranes, and flexible and wearable devices. More importantly, we notice that its excellent metallic conductivity with its hydrophilic nature distinguishes MXene from other materials, and its properties and applications can be further modified by surface functionalization. MXene composites/hybrids outperform pristine MXenes in many applications. In addition, a summary of the latest findings using MXene-based materials to overcome application-specific drawbacks is provided in the last few sections. We hope that the information provided in this review will help integrate lab-scale findings into commercially viable products.