Effect of silicon content on the sintering and biological behaviour of Ca10(PO4)(6-x)(SiO4)x(OH)(2-x) ceramics

Microporous Hydroxyapatite-Based Ceramics Alter the Physiology of Endothelial Cells through Physical and Chemical Cues

Incorporation of silicate ions in calcium phosphate ceramics (CPC) and modification of their multiscale architecture are two strategies for improving the vascularization of scaffolds for bone regenerative medicine. The response of endothelial cells, actors for vascularization, to the chemical and physical cues of biomaterial surfaces is little documented, although essential. We aimed to characterize in vitro the response of an endothelial cell line, C166, cultivated on the surface CPCs varying either in terms of their chemistry (pure versus silicon-doped HA) or their microstructure (dense versus microporous). Adhesion, metabolic activity, and proliferation were significantly altered on microporous ceramics, but the secretion of the pro-angiogenic VEGF-A increased from 262 to 386 pg/mL on porous compared to dense silicon-doped HA ceramics after 168 h. A tubulogenesis assay was set up directly on the ceramics. Two configurations were designed for discriminating the influence of the chemistry from that of the surface physical properties. The formation of tubule-like structures was qualitatively more frequent on dense ceramics. Microporous ceramics induced calcium depletion in the culture medium (from 2 down to 0.5 mmol/L), which is deleterious for C166. Importantly, this effect might be associated with the in vitro static cell culture. No influence of silicon doping of HA on C166 behavior was detected.

Hydroxyapatite Nanoparticles in Drug Delivery: Physicochemistry and Applications

Hydroxyapatite (HAP) has been the gold standard in the biomedical field due to its composition and similarity to human bone. Properties such as shape, size, morphology, and ionic substitution can be tailored through the use of different synthesis techniques and compounds. Regardless of the ability to determine its physicochemical properties, a conclusion for the correlation with the biological response it is yet to be found. Hence, a special focus on the most desirable properties for an appropriate biological response needs to be addressed. This review provides an overview of the fundamental properties of hydroxyapatite nanoparticles and the characterization of physicochemical properties involved in their biological response and role as a drug delivery system. A summary of the main chemical properties and applications of hydroxyapatite, the advantages of using nanoparticles, and the influence of shape, size, functional group, morphology, and crystalline phase in the biological response is presented. A special emphasis was placed on the analysis of chemical and physical interactions of the nanoparticles and the cargo, which was explained through the use of spectroscopic and physical techniques such as FTIR, Raman, XRD, SEM, DLS, and BET. We discuss the properties tailored for hydroxyapatite nanoparticles for a specific biomolecule based on the compilation of studies performed on proteins, peptides, drugs, and genetic material.

Copper containing silicocarnotite bioceramic with improved mechanical strength and antibacterial activity

Copper is well known for its multifunctional biological effects including antibacterial and angiogenic activities, while silicon-containing bioceramic has proved to possess superior biological properties to hydroxyapatite (HA). In this work, CuO was introduced to silicocarnotite (Ca₅(PO₄)₂SiO₄, CPS) to simultaneously enhance its mechanical and antibacterial properties, and its cytocompatibility was also evaluated. Results showed that CuO could significantly facilitate the densification process of CPS bioceramic through liquid-phase sintering. The bending strength of CPS with the addition of 3.0 wt% CuO improved from 29.2 MPa to 63.4 MPa after sintered at 1200 °C. Moreover, Cu-CPS bioceramics demonstrated superior in vitro antibacterial property against both S. aureus and E. coli strains by destroying their membrane integrity, and the antibacterial activity augmented with CuO content. Meanwhile, the released Cu ions from Cu-CPS bioceramics could promote the proliferation of human umbilical vein endothelial cells (HUVECs), and the in vitro cytocompatibility exhibited concentration dependence on Cu ions. These suggest that Cu-CPS bioceramics might be promising candidates for bone tissue regeneration with an ability to prevent postoperative infections.

Development of osteogenic chitosan/alginate scaffolds reinforced with silicocarnotite containing apatitic fibers

Porous composite scaffolds of chitosan-alginate (CH-AL) reinforced by biphasic calcium phosphate fibers containing silicon (Si) were prepared using the freeze-drying method. The fibers were synthesized using a homogenous precipitation method with differing reaction times and were characterized by XRD, FTIR, SEM, and ICP-OES. Fibers produced with no Si incorporation using two different reaction times of 4 d and 8 d comprised two phases of hydroxyapatite (∼93-96 wt%) and β-tricalcium phosphate (β-TCP). No new phases were observed by adding 0.8 wt% of Si during 4 d of precipitation. However, the addition of Si to fibers synthesized within 8 d under reflux conditions produced biphasic fibers with 1.9 wt% Si which consisted of a new phase of silicocarnotite (∼94 wt%) associated with the β-TCP phase. The whisker-like fibers were 10-200 µm in length and 0.2-5 µm in width. The physicochemical, mechanical, and biological properties of composite scaffolds fabricated by adding different fiber contents and types were investigated. The scaffolds exhibited favorable microstructures with a high porosity (66-88%) and the interconnected pores varied in size between 40 and 250 µm. Scaffolds containing silicocarnotite showed a significant improvement in their mechanical properties and in vitro bioactivity (using SBF testing and characterization of the apatite layer by ATR-FTIR and SEM/EDS) as well as proliferation, mineralization and adhesion of MG63 cells, when evaluated by MTT assay, alkaline phosphatase, and SEM. Scaffolds reinforced with silicocarnotite fibers also exhibited better mechanical properties and water uptake, compared to ones containing incorporated fibers made of Si. Composite scaffolds reinforced by 50 wt% fibers precipitated after 8 d were superior in terms of their mechanical properties and achieved a compressive strength and modulus of 272 kPa and 4.9 MPa, respectively, which is 400% greater than CH-AL scaffolds. The results indicate that the addition of Si into biphasic fibers, leading to the formation of silicocarnotite, makes silicocarnotite a potential candidate for the bioactive reinforcement of composite scaffolds for bone tissue engineering.

Ultrasound-assisted synthesis of nanocrystallized silicocarnotite biomaterial with improved sinterability and osteogenic activity

It has been proved that silicon-substituted calcium phosphate ceramics possess superior bone regeneration and resorbability to HA, while the synthesis of single-phase nanocrystallized high Si-containing calcium phosphate is still a challenge. In the present work, a novel and facile aqueous precipitation method assisted with ultrasonic irradiation was adopted firstly to synthesise a single-phase nanocrystallized calcium silicophosphate (Ca₅(PO₄)₂SiO₄, CPS) biomaterial. Crystallization and morphology of Si-apatite precursors synthesized with or without ultrasonic assistance were primarily investigated and the related mechanism was discussed. Moreover, the sinterability, in vitro bioactivity and osteogenic activity of the synthesized CPS were studied in detail. Results showed that an ultrasonic cavitation effect could be beneficial to form a highly dispersive CPS precursor with a single Si-apatite phase, which greatly reduced the calcination temperature of CPS from 1350 °C to 1000 °C. Nanocrystallized CPS powders were obtained successfully under ultrasound-assisted conditions, which showed superior sinterability, in vitro bioactivity and osteogenic activity than those of micron-sized CPS and HA powders. It might be a promising candidate material for bone tissue regeneration applications.

Silicon substituted hydroxyapatite/VEGF scaffolds stimulate bone regeneration in osteoporotic sheep

Silicon-substituted hydroxyapatite (SiHA) macroporous scaffolds have been prepared by robocasting. In order to optimize their bone regeneration properties, we have manufactured these scaffolds presenting different microstructures: nanocrystalline and crystalline. Moreover, their surfaces have been decorated with vascular endothelial growth factor (VEGF) to evaluate the potential coupling between vascularization and bone regeneration. In vitro cell culture tests evidence that nanocrystalline SiHA hinders pre-osteblast proliferation, whereas the presence of VEGF enhances the biological functions of both endothelial cells and pre-osteoblasts. The bone regeneration capability has been evaluated using an osteoporotic sheep model. In vivo observations strongly correlate with in vitro cell culture tests. Those scaffolds made of nanocrystalline SiHA were colonized by fibrous tissue, promoted inflammatory response and fostered osteoclast recruitment. These observations discard nanocystalline SiHA as a suitable material for bone regeneration purposes. On the contrary, those scaffolds made of crystalline SiHA and decorated with VEGF exhibited bone regeneration properties, with high ossification degree, thicker trabeculae and higher presence of osteoblasts and blood vessels. Considering these results, macroporous scaffolds made of SiHA and decorated with VEGF are suitable bone grafts for regeneration purposes, even in adverse pathological scenarios such as osteoporosis. STATEMENT OF SIGNIFICANCE: For the first time, the in vivo behavior of scaffolds made of silicon substituted hydroxyapatites (SiHA) has been evaluated under osteoporosis conditions. In order to optimize the bone regeneration properties of these bioceramics, 3D macroporous scaffolds have been manufactured by robocasting and implanted in osteoporotic sheep. Our experimental design shed light on the important issue of the biological response of nano-sized bioceramics vs highly crystalline bioceramics, as well as on the importance of coupling vascularization and bone growth processes by decorating SiHA scaffolds with vascular endothelial growth factor.

Functionalization of Hydroxyapatite Ceramics: Raman Mapping Investigation of Silanization

Surface modification of bioceramic materials by covalent immobilization of biomolecules is a promising way to improve their bioactivity. This approach implies the use of organic anchors to introduce functional groups on the inorganic surface on which the biomolecules will be immobilized. In this process, the density and surface distribution of biomolecules, and in turn the final biological properties, are strongly influenced by those of the anchors. We propose a new approach based on Raman 2D mapping to evidence the surface distribution of organosilanes, frequently used as anchors on biomaterial surfaces on hydroxyapatite and silicated hydroxyapatite ceramics. Unmodified and silanized ceramic surfaces were characterized by means of contact angle measurements, atomic force microscopy (AFM) and Raman mapping. Contact angle measurements and AFM topographies confirmed the surface modification. Raman mapping highlighted the influence of both the ceramic’s composition and silane functionality (i.e., the number of hydrolysable groups) on the silane surface distribution. The presence of hillocks was shown, evidencing a polymerization and/or an aggregation of the molecules whatever the silane and the substrates were. The substitution of phosphate groups by silicate groups affects the covering, and the spots are more intense on SiHA than on HA.

Characterization and biological properties of a novel synthesized silicon-substituted hydroxyapatite derived from eggshell

In the present study, the effect of adding different concentrations of silicon on physical, mechanical and biological properties of a synthesized aqueous precipitated eggshell-derived hydroxyapatite (e-HA) was evaluated. No secondary phases were detected by X-ray diffraction for the specimens e-HA and e-HA containing silicon (Si-e-HAs) before and after heating at 1200°C. A reduction in the crystallite size and a-axis as well as an increase in c-axis was occurred when silicon replacement was happened in the structure of e-HA. The presence of Si-O vibrations and carbonate modes for Si-e-HAs was confirmed by Fourier transform infrared spectroscopy analysis. The range of porosity and density was varied from 25% and 2.4 g cm^-3 to 7% and 2.8 g cm^-3 for e-HA and Si-e-HAs. The values of Young's modulus ( E) and compressive strength were varied for e-HA and Si-e-HAs. The porous structure of the samples was reduced when they were heated as e-HA kept the porous microstructure containing some dense areas and Si-e-HAs possessed a rough surface including slight levels of microporosity. The acellular in vitro bioactivity represented different apatite morphologies for e-HA and Si-e-HAs. The G-292 osteoblastic cells were stretched well on the surface with polygon-shaped morphology for 0.8Si-e-HA after 7 days of culture. According to MTT assay and alkaline phosphatase test, the maximum cell activity was related to 0.8Si-e-HA. The minimum inhibitory concentration for 0.8Si-e-HA and e-HA was estimated to be about 3.2 and 4.4 mg/mL, respectively. In overall, the sample 0.8Si-e-HA exhibited a higher bacteriostatic effect than e-HA against gram-negative bacterial strain Escherichia coli.

Silicocarnotite Synthesis and Bioactivity in Artificial Saliva Medium

The aim of this study is the synthesis and investigation of bioactive response of acrystalline silicophosphate.A monophasic silicocarnotite was elaborated by solid state reaction from a mixture of beta-tricaliciumphosphate and dicalcium silicate based on mussel shells according to the diagram of system Ca3(PO4)2–Ca2SiO4, at 65 % and 35% respectively , these starting materials are heated up to 1450 °C to obtain a monophasic silicocaronitite. The obtained result probed that the main crystalline phase which was detected and recognized in the heated sample at 1400 and 1450 °C was a well-crystallized silicocarnotite. The test of bioactivity of silicocarnotite in artificial saliva causes the appearance of a reaction layer on the materials surface after 4 hours soaking and growth up during 30 days.This layer is constituted of a biphasic mixture of Si–Ca–P–H material, silicated hydroxyapatite and hydroxyapatite phase are the mainly developing ones with increasing soaking time.The analysis and characterization of the precipitated appearing on the material surface has confirmed experimentally the in vitro bioactivity of silicocarnotite monophasic material.

Lanthanum-silicate-substituted apatite synthesized by fast mechanochemical method: Characterization of powders and biocoatings produced by micro-arc oxidation

Lanthanum-silicate substituted apatite with equal concentrations of the substituents in the range of 0.2-6.0 mol were produced by a fast method - mechanochemical synthesis. This method makes it possible to synthesize a nanosized single-phase product by activating reaction mixtures containing CaHPO₄, CaO, La(OH)₃ and SiO₂·H₂O for 25-30 min in AGO-2 and AGO-3 planetary mills. The structure of the apatites was investigated by the FTIR and XRD methods. It was found that the synthesized samples with substituent concentrations up to 2 mol are substituted oxy-hydroxyapatites, at higher concentrations, they are substituted oxyapatites. The mechanochemically synthesized apatite with a substituent concentration of 0.5 mol was used for depositing biocoatings on titanium substrates by the micro-arc oxidation method. The structure of the coatings is mainly amorphous. In vitro biological tests demonstrated high biocompatibility of the coatings and the absence of cytotoxic action on mesenchymal stem cells.

Functionalization of phosphocalcic bioceramics for bone repair applications

This work is devoted to the processing of bone morphogenetic protein (BMP-2) functionalized silicate substituted hydroxyapatite (SiHA) ceramic spheres. The motivation behind it is to develop injectable hydrogel/bioceramic composites for bone reconstruction applications. SiHA microspheres were shaped by spray drying and thoroughly characterized. The silicate substitution was used to provide preferred chemical sites at the ceramic surface for the covalent immobilization of BMP-2. In order to control the density and the release of the immobilized BMP-2, its grafting was performed via ethoxysilanes and polyethylene glycols. A method based on Kaiser's test was used to quantify the free amino groups of grafted organosilanes available at the ceramic surface for BMP-2 immobilization. The SiHA surface modification was investigated by means of X-ray photoelectron spectroscopy, Fourier transformed infrared spectroscopy and thermogravimetry coupled with mass spectrometry. The BMP-2 bioactivity was assessed, in vitro, by measuring the luciferase expression of a stably transfected C3H10 cell line (C3H10-BRE/Luc cells). The results provided evidence that the BMP-2 grafted onto SiHA spheres remained bioactive.

The Effect and Osteoblast Signaling Response of Trace Silicon Doping Hydroxyapatite

It is commonly accepted that silicon-doped hydroxyapatite (HAp) can achieve good repair effects for both spinal fusion and bone defect filling. However, the underlying mechanism by which silicon aids such beneficial effects is still not fully understood. Herein, we report on silicon-doped hydroxyapatites with excellent biocompatibility to osteoblast cells and suggest the signaling pathway involved. Non-doped HAp and trace Si-doped HAp (Si/HAp) with Si concentration close to and higher than natural bones were synthesized (i.e., 32, 260, and 2000 ppm Si). The composition, crystal lattice vibration pattern, and morphology of these samples are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), and SEM, respectively. Positive biological activities of these Si-doped HAp materials were demonstrated through a cytotoxicity study and with the MTT and alkaline phosphatase (ALP) activity assays. The Si-doped samples were not toxic to MC3T3-E1 cells. Indeed, osteoblast proliferation measurement illustrated that 2000 ppm Si-doped HAp increased osteoblast proliferation by about 1.6 times compared to non-doped HAp. The ALP assay also proves that the trace Si doping has the function to enhance cell proliferation and differentiation. The ALP assay showed that Si doping also enhanced cell differentiation. QRT-PCR results revealed that Si-doped HAp enhanced osteogenic differentiation of osteoblast cells by upregulating genes such as MAPK3, Fzd1, Wnt1, Lrp6, and BMP2. In conclusion, Si-doped HAp promotes osteoblast proliferation and differentiation by activating the Wnt/β-catenin and MAPK signaling pathways. This work could provide useful information of the beneficial effects of silicon in human bones and provide clues as to the molecular mechanism of the promotive effect of Si-doped HAp biomaterials.

Repair of rat calvarial defects using Si-doped hydroxyapatite scaffolds loaded with a bone morphogenetic protein-2-related peptide

Tissue engineering promises therapies ideal for treating conventional large bone injuries and defects. In the present study, we developed a novel Si-HA scaffold loaded with a synthetic BMP-2-related peptide, P28, and tested its ability to repair a critical-sized calvarial defect. We created a calvarial defect (5 mm in diameter) in the parietal bone of 32 rats and implanted one of the following biomaterials: No implant (control), Si-HA, P28/Si-HA, or rhBMP-2/Si-HA. As assessed by micro CT imaging and histological evaluations, the P28/Si-HA scaffold promoted bone recovery to a similar degree as the rhBMP-2/Si-HA scaffold. In addition, both P28/Si-HA and rhBMP-2/Si-HA promoted recovery better than Si-HA alone. The novel P28/Si-HA scaffold might represent a promising biomaterial for future bone tissue engineering applications. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1874-1882, 2016.

In vitro and in vivo evaluation of silicated hydroxyapatite and impact of insulin adsorption

This study evaluates the biological behaviour, in vitro and in vivo, of silicated hydroxyapatite with and without insulin adsorbed on the material surface. Insulin was successfully adsorbed on hydroxyapatite and silicated hydroxyapatite bioceramics. The modification of the protein secondary structure after the adsorption was investigated by means of infrared and circular dichroism spectroscopic methods. Both results were in agreement and indicated that the adsorption process was likely to change the secondary structure of the insulin from a majority of α-helix to a β-sheet form. The biocompatibility of both materials, with and without adsorbed insulin on their surface, was demonstrated in vitro by indirect and direct assays. A good viability of the cells was found and no proliferation effect was observed regardless of the material composition and of the presence or absence of insulin. Dense granules of each material were implanted subcutaneously in mice for 1, 3 and 9 weeks. At 9 weeks of implantation, a higher inflammatory response was observed for silicated hydroxyapatite than for pure hydroxyapatite but no significant effect of adsorbed insulin was detected. Though the presence of silicon in hydroxyapatite did not improve the biological behaviour, the silicon substituted hydroxyapatite remained highly viable.

Accurate characterization of pure silicon-substituted hydroxyapatite powders synthesized by a new precipitation route

This paper presents a new aqueous precipitation method to prepare silicon-substituted hydroxyapatites Ca10(PO4)6-y(SiO4)y(OH)2-y(VOH)y (SiHAs) and details the characterization of powders with varying Si content up to y=1.25molmolSiHA(-1). X-ray diffraction, transmission electron microscopy, solid-state nuclear magnetic resonance and Fourier transform infrared spectroscopy were used to accurately characterize samples calcined at 400°C for 2h and 1000°C for 15h. This method allows the synthesis of monophasic SiHAs with controlled stoichiometry. The theoretical maximum limit of incorporation of Si into the hexagonal apatitic structure is y<1.5. This limit depends on the OH content in the channel, which is a function of the Si content, temperature and atmosphere of calcination. These results, particularly those from infrared spectroscopy, raise serious reservations about the phase purity of previously prepared and biologically evaluated SiHA powders, pellets and scaffolds in the literature.

Sintering of calcium phosphate bioceramics

Calcium phosphate ceramics have become of prime importance for biological applications in the field of bone tissue engineering. This paper reviews the sintering behaviour of these bioceramics. Conventional pressureless sintering of hydroxyapatite, Ca10(PO4)6(OH)2, a reference compound, has been extensively studied. Its physico-chemistry is detailed. It can be seen as a competition between two thermally activated phenomena that proceed by solid-state diffusion of matter: densification and grain growth. Usually, the objective is to promote the first and prevent the second. Literature data are analysed from sintering maps (i.e. grain growth vs. densification). Sintering trajectories of hydroxyapatite produced by conventional pressureless sintering and non-conventional techniques, including two-step sintering, liquid phase sintering, hot pressing, hot isostatic pressing, ultrahigh pressure, microwave and spark plasma sintering, are presented. Whatever the sintering technique may be, grain growth occurs mainly during the last step of sintering, when the relative bulk density reaches 95% of the maximum value. Though often considered very advantageous, most assisted sintering techniques do not appear very superior to conventional pressureless sintering. Sintering of tricalcium phosphate or biphasic calcium phosphates is also discussed. The chemical composition of calcium phosphate influences the behaviour. Similarly, ionic substitutions in hydroxyapatite or in tricalcium phosphate create lattice defects that modify the sintering rate. Depending on their nature, they can either accelerate or slow down the sintering rate. The thermal stability of compounds at the sintering temperature must also be taken into account. Controlled atmospheres may be required to prevent thermal decomposition, and flash sintering techniques, which allow consolidation at low temperature, can be helpful.

Cytocompatibility and osteogenic activity of a novel calcium phosphate silicate bioceramic: Silicocarnotite

In the present study, the effect of a novel bioceramic, silicon-containing calcium phosphate ceramic (silicocarnotite, Ca5 (PO4 )2 SiO4 , CPS) on attachment, proliferation, and osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells (rBMSC) has been investigated in comparison to hydroxyapatite (HA). The CPS showed a similar cell attachment behavior to HA, while the proliferation of rBMSC on CPS was significantly higher than that on HA, which indicated that CPS had a good cytocompatibility. Moreover, the expression of alkaline phosphatase activity and osteogenic-related genes, including Runx-2, osteopontin (OPN), bone sialoprotein (BSP) and osteocalcin (OC), demonstrated that CPS enhanced the osteogenic differentiation of rBMSC and accelerated the differentiation process. The results suggest that CPS ceramic exhibits a good cytocompatibility and osteogenic activity, which might be used as a potential candidate material for bone tissue engineering.