Effects of tricalcium silicate cements on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells in vitro

Electrospun Biomimetic Periosteum Capable of Controlled Release of Multiple Agents for Programmed Promoting Bone Regeneration

The effective repair of large bone defects remains a major challenge due to its limited self-healing capacity. Inspired by the structure and function of the natural periosteum, an electrospun biomimetic periosteum is constructed to programmatically promote bone regeneration using natural bone healing mechanisms. The biomimetic periosteum is composed of a bilayer with an asymmetric structure in which an aligned electrospun poly(ε-caprolactone)/gelatin/deferoxamine (PCL/GEL/DFO) layer mimics the outer fibrous layer of the periosteum, while a random coaxial electrospun PCL/GEL/aspirin (ASP) shell and PCL/silicon nanoparticles (SiNPs) core layer mimics the inner cambial layer. The bilayer controls the release of ASP, DFO, and SiNPs to precisely regulate the inflammatory, angiogenic, and osteogenic phases of bone repair. The random coaxial inner layer can effectively antioxidize, promoting cell recruitment, proliferation, differentiation, and mineralization, while the aligned outer layer can promote angiogenesis and prevent fibroblast infiltration. In particular, different stages of bone repair are modulated in a rat skull defect model to achieve faster and better bone regeneration. The proposed biomimetic periosteum is expected to be a promising candidate for bone defect healing.

In vitro and in vivo evaluation of iRoot BP Plus as a coronal sealing material for regenerative endodontic procedures

OBJECTIVES

To investigate in vitro effects of a nanoparticle bioceramic material, iRoot BP Plus, on stem cells from apical papilla (SCAP) and in vivo capacity to induce pulp-dentin complex formation.

MATERIALS AND METHODS

The sealing ability of iRoot BP Plus was measured via scanning electron microscopy (SEM). SCAP were isolated and treated in vitro by iRoot BP Plus conditioned medium, with mineral trioxide aggregate (MTA) conditioned medium and regular medium used as controls, respectively. Cell proliferation was assessed by BrdU labeling and MTT assay and cell migration was evaluated with wound healing and transwell assays. Osteo/odontogenic potential was evaluated by Alizarin red S staining and qPCR. Pulp-dentin complex formation in vivo was assessed by a tooth slice subcutaneous implantation model.

RESULTS

iRoot BP Plus was more tightly bonded with the dentin. There was no difference in SCAP proliferation between iRoot BP Plus and control groups (P > 0.05). iRoot BP Plus had a greater capacity to elevated cell migration (P < 0.05) and osteo/odontogenic marker expression and mineralization nodule formation of SCAP compared with MTA groups (P < 0.05). Furthermore, the new continuous dentine layer and pulp-like tissue was observed in the iRoot BP Plus group in vivo.

CONCLUSIONS

iRoot BP Plus showed excellent sealing ability, promoted the migration and osteo/odontogenesis of SCAP and induced pulp-dentin complex formation without affecting the cell proliferation, which indicated iRoot BP Plus was a promising coronal sealing material in REPs.

CLINICAL RELEVANCE

The coronal sealing materials play crucial roles for the outcomes of REPs. This study showed that iRoot BP Plus has good coronal sealing and promote pulp-dentin complex formation compared with MTA, providing experimental evidences for the clinical application of iRoot BP Plus as a promising coronal seal material in REPs.

In vitroandin vivocharacterization of a novel tricalcium silicate-based ink for bone regeneration using laser-assisted bioprinting

Grafts aside, current strategies employed to overcome bone loss still fail to reproduce native tissue physiology. Among the emerging bioprinting strategies, Laser-Assisted Bioprinting (LAB) offers very high resolution, allowing designing micrometric patterns in a contactless manner, providing a reproducible tool to test ink formulation. To this date, no LAB associated ink succeeded to provide a reproducible ad integrum bone regeneration on a murine calvaria critical size defect model. Using the CE approved BioRoot RCS® as a mineral addition to a collagen-enriched ink compatible with LAB, the present study describes the process of the development of a solidifying tricalcium silicate-based ink as a new bone repair promoting substrates in a LAB model. This ink formulation was mechanically characterized by rheology to adjust it for LAB. Printed aside Stromal Cells from Apical Papilla (SCAPs), this ink demonstrated a great cytocompatibility, with significant in vitro positive impact upon cell motility, and an early osteogenic differentiation response in the absence of another stimulus. Results indicated that the in vivo application of this new ink formulation to regenerate critical size bone defect tends to promote the formation of bone volume fraction without affecting the vascularization of the neo-formed tissue. The use of LAB techniques with this ink failed to demonstrate a complete bone repair, whether SCAPs were printed or not of at its direct proximity. The relevance of the properties of this specific ink formulation would therefore rely on the quantity applied in situ as a defect filler rather than its cell modulation properties observed in vitro. For the first time, a tricalcium silicate-based printed ink, based on rheological analysis, was characterized in vitro and in vivo, giving valuable information to reach complete bone regeneration through formulation updates. This LAB-based process could be generalized to normalize the characterization of candidate ink for bone regeneration.

In vitro biocompatibility and bioactivity of calcium silicate‑based bioceramics in endodontics (Review)

Calcium silicate-based bioceramics have been applied in endodontics as advantageous materials for years. In addition to excellent physical and chemical properties, the biocompatibility and bioactivity of calcium silicate-based bioceramics also serve an important role in endodontics according to previous research reports. Firstly, bioceramics affect cellular behavior of cells such as stem cells, osteoblasts, osteoclasts, fibroblasts and immune cells. On the other hand, cell reaction to bioceramics determines the effect of wound healing and tissue repair following bioceramics implantation. The aim of the present review was to provide an overview of calcium silicate-based bioceramics currently applied in endodontics, including mineral trioxide aggregate, Bioaggregate, Biodentine and iRoot, focusing on their in vitro biocompatibility and bioactivity. Understanding their underlying mechanism may help to ensure these materials are applied appropriately in endodontics.

Effects of pre-mixed hydraulic calcium silicate putties on osteogenic differentiation of human dental pulp stem cells in vitro

OBJECTIVES

An experimental tricalcium silicate and dicalcium silicate-containing endodontic putty has been designed to overcome the issue of reduced shelf life after exposure to atmospheric moisture during repeated opening of the container for clinical retrieval. The present study examined the effects of this experimental hydraulic putty on the mineralogenic characteristics of osteogenic lineage-committed human dental pulp stem cells (hDPSCs), by comparing the cellular responses with a commercially available putty (EndoSequence BC RRM Putty).

METHODS

The osteogenic potential of hDPSCs that had been exposed to the putties was examined using quantitative reverse-transcription polymerase chain reaction for osteogenic gene expressions and western blot for osteogenic protein expressions. Alkaline phosphatase activity assay and alizarin red S staining were performed to detect changes in production of the intracellular enzyme and extracellular matrix mineralization respectively.

RESULTS

Osteogenic differentiation of the hDPSCs was significantly enhanced after exposure to the pre-mixed hydraulic putties, with no significant difference between these two examined putties.

CONCLUSIONS

The experimental hydraulic tricalcium silicate putty enhances osteogenic differentiation of hDPSCs to the same extent as a commercially available tricalcium silicate putty.

CLINICAL SIGNIFICANCE

The experimental hydraulic putty appears to be an alternative to the commercial putty when used for applications involving the regeneration of bone in endodontics. Animal models are required for validating its potential in enhancing osteogenesis in vivo.

Biocompatible Nanocomposite Enhanced Osteogenic and Cementogenic Differentiation of Periodontal Ligament Stem Cells In Vitro for Periodontal Regeneration

Decays in the roots of teeth is prevalent in seniors as people live longer and retain more of their teeth to an old age, especially in patients with periodontal disease and gingival recession. The objectives of this study were to develop a biocompatible nanocomposite with nano-sized calcium fluoride particles (Nano-CaF₂), and to investigate for the first time the effects on osteogenic and cementogenic induction of periodontal ligament stem cells (hPDLSCs) from human donors.Nano-CaF₂ particles with a mean particle size of 53 nm were produced via a spray-drying machine.Nano-CaF₂ was mingled into the composite at 0%, 10%, 15% and 20% by mass. Flexural strength (160 ± 10) MPa, elastic modulus (11.0 ± 0.5) GPa, and hardness (0.58 ± 0.03) GPa for Nano-CaF₂ composite exceeded those of a commercial dental composite (p < 0.05). Calcium (Ca) and fluoride (F) ions were released steadily from the composite. Osteogenic genes were elevated for hPDLSCs growing on 20% Nano-CaF₂. Alkaline phosphatase (ALP) peaked at 14 days. Collagen type 1 (COL1), runt-related transcription factor 2 (RUNX2) and osteopontin (OPN) peaked at 21 days. Cementogenic genes were also enhanced on 20% Nano-CaF₂ composite, promoting cementum adherence protein (CAP), cementum protein 1 (CEMP1) and bone sialoprotein (BSP) expressions (p < 0.05). At 7, 14 and 21 days, the ALP activity of hPDLSCs on 20% Nano-CaF₂ composite was 57-fold, 78-fold, and 55-fold greater than those of control, respectively (p < 0.05). Bone mineral secretion by hPDLSCs on 20% Nano-CaF₂ composite was 2-fold that of control (p < 0.05). In conclusion, the novel Nano-CaF₂ composite was biocompatible and supported hPDLSCs. Nano-CaF₂ composite is promising to fill tooth root cavities and release Ca and F ions to enhance osteogenic and cementogenic induction of hPDLSCs and promote periodontium regeneration.

Real-time nanoleakage and the flow characteristics of calcium silicate root canal filling materials

This study aimed to investigate the real-time nanoleakage and flow characteristics of calcium silicate-based (Ca-Si) root canal filling materials. Extracted human teeth (n = 30) were decoronated and standardized in their inner and outer dimensions. After root canal enlargement, the roots were filled with gutta-percha (GP) and AH26 sealer, GP and EndoSeal MTA sealer, or Biodentine. The roots were connected to a Nanoflow device (IB Systems) under hydrostatic pressure (40 cm∙H₂O) and fluid flow was traced through the filled roots. Data were detected at the nanoscale twice per second and automatically recorded in units of nL/s. Leakage was quantified as the mean slope until the curve plateaued over time, and all static flow intervals lasting longer than 1 s were analyzed to identify any increase in flow and duration. Data were statistically analyzed using the Kruskal-Wallis test. The calculated leakage values were 0.0670 ± 0.0516 nL/s for GP/AH26, 0.1397 ± 0.1579 nL/s for GP/EndoSeal MTA, and 0.0358 ± 0.0538 nL/s for Biodentine, with no statistically significant differences among the root filling materials (P > 0.05). An analysis of real-time flow data for 1000 s to identify spot trends and the overall tendency of flow until a plateau was reached revealed a stepwise increase in the roots filled with Ca-Si material, whereas the GP/AH26-filled roots showed a linear increase. Real-time measurements under hydrostatic pressure with the Nanoflow device enabled precise fluid flow tracing through the root canal filling material. In terms of nanoleakage, the tested root canal filling materials showed no significant differences, while the real-time flow patterns of roots filled with Ca-Si material showed different characteristics from those of GP/AH26-filled roots.

Synergistic Effect of Cell-Derived Extracellular Matrices and Topography on Osteogenesis of Mesenchymal Stem Cells

Cell-derived matrices (CDMs) are an interesting alternative to conventional sources of extracellular matrices (ECMs) as CDMs mimic the natural ECM composition better and are therefore attractive as a scaffolding material for regulating the functions of stem cells. Previous research on stem cell differentiation has demonstrated that both surface topography and CDMs have a significant influence. However, not much focus has been devoted to elucidating possible synergistic effects of CDMs and topography on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hBM-MSCs). In this study, polydimethylsiloxane (PDMS)-based anisotropic topographies (wrinkles) with various topography dimensions were prepared and subsequently combined with native ECMs produced by human fibroblasts that remained on the surface topography after decellularization. The synergistic effect of CDMs combined with topography on osteogenic differentiation of hBM-MSCs was investigated. The results showed that substrates with specific topography dimensions, coated with aligned CDMs, dramatically enhanced the capacity of osteogenesis as investigated using immunofluorescence staining for identifying osteopontin (OPN) and mineralization. Furthermore, the hBM-MSCs on the substrates decorated with CDMs exhibited a higher percentage of (Yes-associated protein) YAP inside the nucleus, stronger cell contractility, and greater formation of focal adhesions, illustrating that enhanced osteogenesis is partly mediated by cellular tension and mechanotransduction following the YAP pathway. Taken together, our findings highlight the importance of ECMs mediating the osteogenic differentiation of stem cells, and the combination of CDMs and topography will be a powerful approach for material-driven osteogenesis.

Analysis of Molecular Changes Induced By Mineral Trioxide Aggregate On sPLA2

The aim of this study was to analyze the effects of MTA on the structure and enzymatic activity of sPLA2 in order to provide subsidies for improvement in the formulation of the product. MTA powder was incubated for 60 min in the presence of sPLA2 and was analyzed by chromatography, electrospray mass (ESI-MS) and small-angle X-ray scattering (SAXS). It was find that the elution profile, retention time, and fragmentation of sPLA2 were altered after treatment with MTA. Calcium was the MTA component that most amplified the inflammatory signal. Significant interactions were found between MTA and sPLA2, which could aid in our understanding of the mechanisms of action of MTA during the inflammatory process and it may facilitate the structural modification of MTA, thereby improving its biological safety and consequently the rate of the treatment success.

Muscone Promotes The Adipogenic Differentiation Of Human Gingival Mesenchymal Stem Cells By Inhibiting The Wnt/β-Catenin Signaling Pathway

Objectives

This study was performed to evaluate the effects of muscone on the proliferation, migration and differentiation of human gingival mesenchymal stem cells (GMSCs) and to explore the relevant mechanisms.

Materials and methods

We performed studies to determine the effects and mechanisms of muscone on GMSC proliferation, migration and differentiation. We conducted CCK-8, colony formation, transwell chamber, scratch wound, alkaline phosphatase (ALP) staining and activity, and alizarin red and oil red O staining assays, as well as real-time quantitative polymerase chain reaction (qRT-PCR), to ascertain the effects of muscone on GMSC proliferation, migration and differentiation in vitro. The mechanism by which muscone influences the osteogenic and adipogenic differentiation of GMSCs was elucidated by qRT-PCR and Western blotting.

Results

We found that muscone significantly promoted GMSC proliferation, chemotaxis, wound healing and fat droplet formation and inhibited ALP activity and mineral deposition. Notably, we observed that the Wnt/β-catenin pathway was closely related to the ability of muscone to inhibit the osteogenic differentiation and promote the adipogenic differentiation of GMSCs. The effect of muscone on the multidirectional differentiation capacity of GMSCs was significantly reversed by the agonist lithium chloride through the Wnt/β-catenin signaling pathway.

Conclusion

Muscone effectively increased the proliferation and migration, promoted the adipogenic differentiation and inhibited the osteogenic differentiation of GMSCs by inhibiting the Wnt/β-catenin signaling pathway. These results may provide a theoretical basis for the application of GMSCs and muscone in tissue engineering and regenerative medicine.

Novel metformin-containing resin promotes odontogenic differentiation and mineral synthesis of dental pulp stem cells

This represents the first report on the development of metformin-containing dental resins. The objectives were to use the resin as a carrier to deliver metformin locally to stimulate dental cells for dental tissue regeneration and to investigate the effects on odontogenic differentiation of dental pulp stem cells (DPSCs) and mineral synthesis. Metformin was incorporated into a resin at 20% by mass as a model system. DPSC proliferation attaching on resins was evaluated. Dentin sialophosphoprotein (DSPP), dentin matrix phosphoprotein 1 (DMP-1), alkaline phosphatase (ALP), and runt-related transcription factor 2 (Runx2) genes expressions were measured. ALP activity and alizarin red staining (ARS) of mineral synthesis by the DPSCs on resins were determined. DPSCs on metformin-containing resin proliferated well (mean ± SD; n = 6), and the number of cells increased by 4-fold from 1 to 14 days (p > 0.1). DSPP, ALP, and DMP-1 gene expressions of DPSCs on metformin resin were much higher than DPSCs on control resin without metformin (p < 0.05). ALP activity of metformin group was 70% higher than that without metformin at 14 days (p < 0.05). Mineral synthesis by DPSCs on metformin-containing resin at 21 days was 9-fold that without metformin (p < 0.05). A novel metformin-containing resin was developed, achieving substantial enhancement of odontoblastic differentiation of DPSCs and greater mineral synthesis. The metformin resin is promising for deep cavities and perforated cavities to stimulate DPSCs for tertiary dentin formation, for tooth root coatings with metformin release for periodontal regeneration, and for root canal fillings with apical lesions to stimulate bone regeneration.

In vivo evaluation of the subchronic systemic toxicity of akermanite bioceramic for bone regeneration following ISO standard methods

Although the akermanite (Ca2MgSi2O7) bioceramic has been confirmed to possess favorable osteogenic activity, until now little was known about its in vivo subchronic systemic toxicity, which is important for determining the biocompatibility and the clinical applications of the material in bone implants. In this study, the subchronic systemic toxicity of akermanite bioceramic was for the first time investigated according to well-accepted ISO standard methods. Following the method, healthy adult Wistar rats were injected with certain amounts of extracts of akermanite bioceramic that was intended to simulate the ionic product during the degradation of the material when implanted into the body. At day 28 after injection, the general body conditions, blood cytology, blood biochemistry and histology of all important organs of the rats were examined. The results showed that there was no significant difference in the hemoglobin concentration, red blood cell count, platelet count and white blood cell count between the rats with injection of akermanite bioceramic extracts and the saline control. The indicators of liver function, including aspartate aminotransferase and alkaline phosphatase, and kidney function, including blood urea nitrogen and creatinine, did not show significant difference between the two groups (P > 0.05). In addition, the results of histological examination showed that the extract of akermanite bioceramic did not cause any pathological changes to important organs such as the heart, liver and kidneys. These findings demonstrated that the ionic product derived from the degradation of akermanite bioceramic did not cause in vivo subchronic systemic toxicity. The results of the current study provided more strengthened evidence for the biosafety of akermanite bioceramic and suggest that this material with desirable biocompatibility may be a potential candidate for orthopedic clinical applications.

The Effect of Commercially Available Endodontic Cements and Biomaterials on Osteogenic Differentiation of Dental Pulp Pluripotent-Like Stem Cells

The aim of this study is to compare the osteogenic differentiation capacity of the dental pulp pluripotent-like stem cells (DPPSCs) using conditional media pretreated with ProRoot-MTA, Biodentine (BD) or the newly manufactured pure Portland cement Med-PZ (MZ). DPPSCs, isolated from human third molars, are the most relevant cell model to draw conclusions about the role of biomaterials on dental tissue regeneration. Cytotoxicity, alkaline phosphatase (ALP) activity, and calcium deposition analysis were evaluated at different differentiation time points. Gene expression of key osteogenic markers (RUNX2, Collagen I and Osteocalcin) was determined by qRT-PCR analysis. The osteogenic capacity of cells cultured in conditioned media prepared from MZ or MTA cements was comparable. BD conditioned media supported cell proliferation but failed to induce osteogenesis. Relative to controls and other cements, high osteogenic gene expression was observed in cultures pre-treated with the novel endodontic cement MZ. In conclusion, the in vitro behavior of a MZ- endodontic cement was evaluated, showing similar enhanced cell proliferation compared to other commercially available cements but with an enhanced osteogenic capacity with prospective potential as a novel cement for endodontic treatments.

Response of periodontium to mineral trioxide aggregate and Biodentine: a pilot histological study on humans

BACKGROUND

The aim of this study was to investigate for the first time the histological response of human periodontium to mineral trioxide aggregate (MTA) and Biodentine.

METHODS

Six patients scheduled for implant full-arch rehabilitation were randomly assigned to one of the two test groups: MTA or Biodentine treatment. For each patient, two teeth scheduled for strategic extraction were randomly assigned either to the test or to the control treatment. A lateral perforation was drilled on the root and either repaired with MTA/Biodentine or filled with gutta-percha(control). Three months later, the teeth were extracted along with the coronal third of the alveolar bone and a portion of gingival tissue, while performing implant placement, and processed for histological analysis.

RESULTS

Biodentine resulted in less extrusion into the periodontal environment. All the materials showed good biocompatibility. A new mineralized cementum-like tissue incorporating periodontal fibres was visible in all cases treated with MTA. A small amount of new mineralized tissue was found in two Biodentine cases but not in control cases. Biodentine resulted in less damage to the periodontal ligament.

CONCLUSIONS

Bioactivity and biocompatibility of MTA were confirmed in human models. Biodentine proved to be biocompatible, but it seems not to induce cementum regeneration.

Carbon dots for tracking and promoting the osteogenic differentiation of mesenchymal stem cells

Carbon dots and their derivatives are capable of both tracking and enhancing the osteogenic differentiation of MSCs.

Human gingival fibroblasts induced and differentiated into vascular endothelial-like cells

A novel method for repair of vascular disease, mechanical damage, and tissue rebuilding is urgently required. Vascular endothelial cells (VECs) play an essential role in vascular rebuilding and vasotransplantation. In the present study, human gingival fibroblasts (HGFs) were cultured and induced into endothelial-like cells in vitro in order to confirm that HGFs with stem cell properties possessed the potential for differentiation into endothelial-like cells. The epithelium was extracted from normal human gingiva consisting of epithelium and connective tissue, which was isolated from patients. The identification of HGFs and induced endothelial-like cells were confirmed by flow cytometry, reverse transcription polymerase chain reaction (RT-PCR), immunocytochemical stain (ICS), and immunofluorescence stain (ISA). The morphology of human gingival fibroblasts with 8 ng/mL VEGF165 induced for different periods of days were observed by inverted microscope. Before induction, flow cytometry analysis showed that HGFs were positive for vimentin, but negative for CD31. RT-PCR, ICS, and ISA showed vimentin, S100A4, α-SMA, collagen III, and S100A4 were specifically expressed in these fibroblast cells. After induction, ICS showed induced vascular endothelial-like cells were positive for CD34 and CD31; ISA showed cells induced were positive for vWF and E-cadherin; RT-PCR results demonstrated that tie2 was specifically expressed in the cells induced. Flow cytometry analysis of the transformation efficiency from HGFs to endothelial-like cells. In conclusion, we found that HGFs possessed capacity for being induced and differentiated into vessel endothelial-like cells with typical and specific morphological, ultrastructural, and immunological characters of endothelial-like cells by induction with VEGF.

Bioactive calcium silicate extracts regulate the morphology and stemness of human embryonic stem cells at the initial stage

We shed light on the impact of CS extracts on hESC's proliferation and differentiation, which is not clearly investigated.

Systematic investigation of β-dicalcium silicate-based bone cements in vitro and in vivo in comparison with clinically applied calcium phosphate cement and Bio-Oss®

Herein we systematically investigated the biological performance of a β-dicalcium silicate (β-C₂S)-based bone cement in comparison with the clinically used calcium phosphate cement (CPC) and Bio-Oss®.

Effects of a discoloration-resistant calcium aluminosilicate cement on the viability and proliferation of undifferentiated human dental pulp stem cells

Discoloration-resistant calcium aluminosilicate cement has been formulated to overcome the timely problem of tooth discoloration reported in the clinical application of bismuth oxide-containing hydraulic cements. The present study examined the effects of this experimental cement (Quick-Set2) on the viability and proliferation of human dental pulp stem cells (hDPSCs) by comparing the cellular responses with commercially available calcium silicate cement (white mineral trioxide aggregate; WMTA) after different aging periods. Cell viability and proliferation were examined using assays that examined plasma membrane integrity, leakage of cytosolic enzyme, caspase-3 activity for early apoptosis, oxidative stress, mitochondrial metabolic activity and intracellular DNA content. Results of the six assays indicated that both Quick-Set2 and WMTA were initially cytotoxic to hDPSCs after setting for 24 h, with Quick-Set2 being comparatively less cytotoxic than WMTA at this stage. After two aging cycles, the cytotoxicity profiles of the two hydraulic cements were not significantly different and were much less cytotoxic than the positive control (zinc oxide-eugenol cement). Based on these results, it is envisaged that any potential beneficial effect of the discoloration-resistant calcium aluminosilicate cement on osteogenesis by differentiated hDPSCs is more likely to be revealed after outward diffusion and removal of its cytotoxic components.