Enhanced photocatalytic and antibacterial activity of acridinium-grafted g-C3N4 with broad-spectrum light absorption for antimicrobial photocatalytic therapy

Quercetin sensitized covalent organic framework for boosting photocatalytic H2O2 production and antibacterial

In order to overcome the problems of narrow absorption spectrum, easy recombination of photogenerated carriers, and low solar energy utilization of single semiconductor photocatalysts, sensitization systems have been developed to further improve the efficiency of photocatalytic performance. However, the current sensitizers are mainly focused on relatively single dye molecules, which are easily decomposed during the photoreaction process. Therefore, the development of a novel sensitization system with high activity and stability is imminent. In this work, the natural compound Quercetin was used as a sensitizer to sensitized TAPPy-Da-COF. The Quercetin/TAPPy-Da-COF composites promoted rapid separation of photogenerated electron pairs and exhibited a broad visible-light response, which effectively improved the photocatalytic efficiency. The H2O2 yield of Quercetin/TAPPy-Da-COF in pure water is 289.84 μmol·h-1·g-1, which is 1.3 times higher than that of TAPPy-Da-COF. In addition, the reactive oxygen species (ROS) produced by photocatalysis under visible light had obvious antibacterial effects against Escherichia coli (E.coil) and Staphylococcus aureus (S.aureus). Meanwhile, At the same time, Quercetin/TAPPy-Da-COF/polyvinyl alcohol (PVA) aerogel was prepared by cross-linking method combined with freeze-drying method. It not only efficiently produced H2O2 and in-situ antimicrobial, but also realized rapid reuse of the catalyst. This work demonstrates that the natural compound Quercetin can be used as a sensitizer to sensitize semiconductor materials and promote the improvement of photocatalytic performance. This not only provides a new perspective for the subsequent development of green, efficient, and low-cost photosensitizers, but also offers a promising pathway for the synthesis of high-performance photocatalytic composites.

Photocatalytic TiO2/HAP nanocomposite for antimicrobial treatment, promineralization, and tooth whitening

Early dental caries and tooth staining are prevalent clinical conditions, so it is of great clinical significance to develop a multifunctional material. Photocatalytic therapies play a significant role in the medical field. However, the use of photocatalytic materials in the dental field is relatively limited. In this study, multifunctional titanium dioxide/nanohydroxyapatite (TiO2/HAP) nanocomposites were synthesised using a hydrothermal method and investigated for their antibacterial properties, mineralization-promoting effects, tooth whitening capabilities, and biocompatibility. TiO2 serves as a photocatalyst, facilitating antimicrobial treatment and improving teeth whitening through a photodynamic reaction. HAP, as a mineralization-promoting agent, effectively promotes enamel remineralization following plaque removal. The results of the whitening experiment indicated after treatment by TiO2/HAP combined with blue light irradiation, the tooth color improved from C4 to A1. In a rat molar model of early caries, TiO2/HAP effectively removed dental plaque and increased the calcium-to-phosphorus ratio to 1.58, further validating the results of the microhardness test. Meanwhile, TiO2/HAP nanocomposites demonstrated good biocompatibility in vivo and did not significantly alter the oral microbial community. The results indicate that TiO2/HAP plays a significant role in antimicrobial activity, remineralization, and tooth whitening, offering a novel strategy for the prevention and treatment of early caries and tooth staining.

Semiconductor photocatalytic antibacterial materials and their application for bone infection treatment

Bacterial infection in bone tissue engineering is a severe clinical issue. Traditional antimicrobial methods usually cause problems such as bacterial resistance and biosecurity. Employing semiconductor photocatalytic antibacterial materials is a more controlled and safer strategy, wherein semiconductor photocatalytic materials generate reactive oxygen species under illumination for killing bacteria by destroying their cell membranes, proteins, DNA, etc. In this review, P-type and N-type semiconductor photocatalytic materials and their antibacterial mechanisms are introduced. Type II heterojunctions, P-N heterojunctions, type Z heterojunctions and Schottky junctions have been reported to reduce the recombination of carriers, while element doping, sensitization and up-conversion luminescence expand the photoresponse range. Furthermore, the applications of semiconductor photocatalytic antibacterial materials in bone infection treatment such as osteomyelitis treatment, bone defect repair and dental tissue regeneration are summarized. Finally, the conclusion and future prospects of semiconductor photocatalytic antibacterial materials in bone tissue engineering were analyzed.

Metal-free photocatalyst with reduced graphene oxide-doped graphitic carbon nitride homojunctions for efficient antibacterial applications

Bacterial infections are a major global health challenge, posing severe risks to human well-being. Although numerous strategies have been developed to combat bacterial pathogens, their practical application is often hindered by operational constraints. Photocatalytic materials have emerged as promising candidates for bacterial disinfection and food preservation due to their efficiency and sustainability. In this study, a graphitic carbon nitride (g-C3N4) homojunction was synthesized, with reduced graphene oxide (RGO) incorporated to suppress the rapid recombination of photocarriers. The resulting composites demonstrated significantly enhanced photocatalytic antibacterial activity compared to original g-C3N4. The improvement is due to the critical role of RGO, which not only facilitates efficient electron transport but also introduces sharp edges that mechanically disrupt bacterial cell membranes. The experimental results demonstrated that the composite exhibited a bactericidal efficiency of 99.92% against Escherichia coli and 99.85% against Staphylococcus aureus within 180 minutes, highlighting its potential for practical antibacterial applications.

2D V2C MXene/2D g-C3N4 nanosheet heterojunctions constructed via a one-pot method for remedying water pollution through high-efficient adsorption together with in situ photocatalytic degradation

With the development of modern industry, the problems of water pollution have become increasingly serious. There is a strong need to develop highly efficient and environmentally friendly technologies to address water pollution. In this work, a novel 2D V2C MXene/2D g-C3N4 nanosheet heterojunction was constructed via a one-pot method. The obtained composite materials displayed excellent purifying capacity for dye pollutants, with removal ratios for crystal violet (CV), Rhodamine B (RhB) and methylene blue (MB) of 99.5%, 99.5%, and 95% within 80 min (including an adsorption process for 50 min and photodegradation process for 27 min), respectively. The extraordinary purifying capacity was accomplished through high-efficient adsorption together with in situ photocatalytic degradation within the unique 2D/2D heterojunction structure. The successful exploitation of 2D V2C MXene/2D g-C3N4 nanosheet heterojunctions provided a simple method to efficiently remedy water pollution.

Developing zinc oxide and peanut shell-derived carbon star-shaped composite materials for effective photo-antibacterial treatment

The development of new carbon-based materials using natural biowaste for biomedical applications has remained a significant challenge in the past decades. In this study, we successfully synthesized and characterized composite materials made from peanut shell-derived carbon (PNS-C) decorated on ZnO that formed star-shaped particles via a simple hydrothermal technique. The as-prepared composites possess several advantages, including unique optical properties and high photostability. We evaluate the antibacterial performance against Escherichia coli, a gram-negative bacterium and Staphylococcus aureus, a gram-positive bacterium, under irradiated and non-irradiated conditions. Interestingly, the photo-antibacterial activities of ZnO/PNS-C composites showed great inhibition of bacterial growth as compared to pure ZnO. Moreover, significant disruptions in cellular activities occur when the composites make direct contact with the bacterial cell wall. The electrons and holes produced by excitation in composites provide a pronounced deactivating effect on bacterial activity. In addition, ZnO/PNS-C composites are highly biocompatible with normal cells. Thus, these newly developed composites made from a natural biowaste system with an affordable price, abundance, and non-toxicity could provide a potentially environmentally friendly and fruitful route for antibacterial therapy in future applications.

The loading of Fe ions on N-doped carbon nanosheets to boost photocatalytic cascade for water disinfection

The pervasive presence of pathogenic bacteria in water environment poses a serious threat to public health. Here, a photocatalytic cascade was developed to reveal great water disinfection. Firstly, N-doped carbon nanosheets (N-CNSs) about 30-50 nm in size were synthesized by a hydrothermal strategy. It revealed wide-spectrum photocatalysis for H2O2 generation via a typical two-step single-electron process. A Fenton agent (Fe ion) was loaded, N-CNSs-Fe can in-situ convert photocatalytic H2O2 into ·OH with high oxidation potential. Moreover, its Fenton active is three times greater than pure Fe2+ owing to electron enrichment from N-CNSs to Fe for Fe3+/Fe2+ cycle. Further investigation displayed that Fe loading also could decrease bad gap and promote charge separation to boost photocatalysis. In addition, N-CNSs-Fe possesses positive surface potential to exhibit strong interaction with negative bacteria, facilitating the capture. Therefore, the nanocomposite can effectively inactivate E. coli with a lethality rate of 99.7 % under stimulated sunlight irradiation. In addition, it also was employed to treat a complex lake water sample, revealing great antibacterial (95.1 %) and dye-decolored (92.3 %) efficiency at the same time. With novel biocompatibility and antibacterial ability, N-CNSs-Fe possessed great potential for water disinfection.

Nitrogen-functionalization of carbon materials for supercapacitor: Combining with nanostructure directly is superior to doping amorphous element

Just how heteroatomic functionalization enhances electrochemical capacity of carbon materials is a recent and widely studied field in scientific research. However, there is no consensus on whether combining with heteroatom-bearing nanostructures directly or doping amorphous elements is more advantageous. Herein, two kinds of porous carbon nanosheets were prepared from coal tar pitch through anchoring graphitic carbon nitride (PCNs/GCNs-5) or doping amorphous nitrogen element (PCNs/N). The structural characteristics and electrochemical properties of the two PCNs were revealed and compared carefully. It can be found that the amorphous nitrogen of PCNs/N will have a grievous impact on its carbon skeleton network, resulting in reduced stability in charge and discharge process, while the structural collapse of carbon network could be avoided in PCNs/GCNs-5 by the heteroatoms in the form of nanostructure. Particularly, PCNs/GCNs-5 exhibits extremely high specific capacity of 388 F g-1 at 1 A g-1, and splendid the capacitance retention rate of 98% after 10,000 cycles of charge and discharge, which are overmatch than the amorphous nitrogen doped carbon materials reported recently and PCNs/N. The combining strategy with nanostructure will inspire the design of carbon materials towards high-performance supercapacitor.

Type I photodynamic antimicrobial therapy: Principles, progress, and future perspectives

The emergence of drug-resistant bacteria has significantly diminished the efficacy of existing antibiotics in the treatment of bacterial infections. Consequently, the need for finding a strategy capable of effectively combating bacterial infections has become increasingly urgent. Photodynamic therapy (PDT) is considered one of the most promising emerging antibacterial strategies due to its non-invasiveness, low adverse effect, and the fact that it does not lead to the development of drug resistance. However, bacteria at the infection sites often exist in the form of biofilm instead of the planktonic form, resulting in a hypoxic microenvironment. This phenomenon compromises the treatment outcome of oxygen-dependent type-II PDT. Compared to type-II PDT, type-I PDT is not constrained by the oxygen concentration in the infected tissues. Therefore, in the treatment of bacterial infections, type-I PDT exhibits significant advantages over type-II PDT. In this review, we first introduce the fundamental principles of type-I PDT in details, including its physicochemical properties and how it generates reactive oxygen species (ROS). Next, we explore several specific antimicrobial mechanisms utilized by type-I PDT and summarize the recent applications of type-I PDT in antimicrobial treatment. Finally, the limitations and future development directions of type-I photosensitizers are discussed. STATEMENT OF SIGNIFICANCE: The misuse and overuse of antibiotics have accelerated the development of bacterial resistance. To achieve the effective eradication of resistant bacteria, pathfinders have devised various treatment strategies. Among these strategies, type I photodynamic therapy has garnered considerable attention owing to its non-oxygen dependence. The utilization of non-oxygen-dependent photodynamic therapy not only enables the effective elimination of drug-resistant bacteria but also facilitates the successful eradication of hypoxic biofilms, which exhibits promising prospects for treating biofilm-associated infections. Based on the current research status, we anticipate that the novel type I photodynamic therapy agent can surmount the biofilm barrier, enabling efficient treatment of hypoxic biofilm infections.

Photocatalytic antibacterial agents based on inorganic semiconductor nanomaterials: a review

Microbial contamination and antibiotic pollution have threatened public health and it is important to develop a rapid and safe sterilization strategy. Among various disinfection strategies, photocatalytic antibacterial methods have drawn increasing attention due to their efficient disinfection performances and environment-friendly properties. Although there are some reviews about bacterial disinfection, specific reviews on photocatalysis focused on inorganic semiconductor nanomaterials are rarely reported. Herein, we present a systematic summary of recent disinfection developments based on inorganic nanomaterials (including metal oxides, sulfides, phosphides, carbon materials, and corresponding heterostructures) over the past five years. Moreover, key factors and challenges for inorganic nanomaterial-based photocatalytic disinfection are outlined, which holds great potential for future photocatalytic antibacterial applications.

Progress of disinfection catalysts in advanced oxidation processes, mechanisms and synergistic antibiotic degradation

Human diseases caused by pathogenic microorganisms make people pay more attention to disinfection. Meanwhile, antibiotics can cause microbial resistance and increase the difficulty of disease treatment, resulting in risk of triggering a vicious circle. Advanced oxidation process (AOPs) has been widely studied in the field of synergistic treatment of the two contaminates. This paper reviews the application of catalytic materials and their modification strategies in the context of AOPs for disinfection and antibiotic degradation. It also delves into the mechanisms of disinfection such as the pathways for microbial inactivation and the related influencing factors, which are essential for understanding the pivotal role of catalytic materials in disinfection principles by AOPs. More importantly, the exploratory research on the combined use of AOPs for disinfection and antibiotic degradation is discussed, and the potential and prospects in this field is highlighted. Finally, the limitations and challenges associated with the application of AOPs in disinfection and antibiotic degradation are summarized. It aims to provide a starting point for future research efforts to facilitate the widespread use of advanced oxidation processes in the field of public health.

Antibacterial micro/nanomotors: advancing biofilm research to support medical applications

Multi-drug resistant (MDR) bacterial infections are gradually increasing in the global scope, causing a serious burden to patients and society. The formation of bacterial biofilms, which is one of the key reasons for antibiotic resistance, blocks antibiotic penetration by forming a physical barrier. Nano/micro motors (MNMs) are micro-/nanoscale devices capable of performing complex tasks in the bacterial microenvironment by transforming various energy sources (including chemical fuels or external physical fields) into mechanical motion or actuation. This autonomous movement provides significant advantages in breaking through biological barriers and accelerating drug diffusion. In recent years, MNMs with high penetrating power have been used as carriers of antibiotics to overcome bacterial biofilms, enabling efficient drug delivery and improving the therapeutic effectiveness of MDR bacterial infections. Additionally, non-antibiotic antibacterial strategies based on nanomaterials, such as photothermal therapy and photodynamic therapy, are continuously being developed due to their non-invasive nature, high effectiveness, and non-induction of resistance. Therefore, multifunctional MNMs have broad prospects in the treatment of MDR bacterial infections. This review discusses the performance of MNMs in the breakthrough and elimination of bacterial biofilms, as well as their application in the field of anti-infection. Finally, the challenges and future development directions of antibacterial MNMs are introduced.

Light controlled self-escape capability of non-cationic carbon nitride-based nanosheets in lysosomes for hepatocellular carcinoma targeting stimulus-responsive gene delivery

High positive charge-induced toxicity, easy lysosomal degradation of nucleic acid drugs, and poor lesion sites targeting are major problems faced in the development of gene carriers. Herein, we proposed the concept of self-escape non-cationic gene carriers for targeted delivery and treatment of photocontrolled hepatocellular carcinoma (HCC) with sufficient lysosome escape and multiple response capacities. Functional DNA was bound to the surface of biotin-PEG2000-modified graphitic carbon nitride (Bio-PEG-CN) nanosheets to form non-cationic nanocomplexes Bio-PEG-CN/DNA. These nanocomposites could actively target HCC tissue. Once these nanocomplexes were taken up by tumor cells, the accumulated reactive oxygen species (ROS) generated by Bio-PEG-CN under LED irradiation would disrupt the lysosome structure, thereby facilitating nanocomposites escape. Due to the acidic microenvironment and lipase in the HCC tissue, the reversible release of DNA could be promoted to complete the transfection process. Meanwhile, the fluorescence signal of Bio-PEG-CN could be monitored in real time by fluorescence imaging technology to investigate the transfection process and mechanism. In vitro and in vivo results further demonstrated that these nanocomplexes could remarkably upregulate the expression of tumor suppressor protein P53, increased tumor sensitivity to ROS generated by nanocarriers, and realized effective gene therapy for HCC via loading P53 gene.

Rational Designs of Biomaterials for Combating Oral Biofilm Infections

Oral biofilms, which are also known as dental plaque, are the culprit of a wide range of oral diseases and systemic diseases, thus contributing to serious health risks. The manner of how to achieve good control of oral biofilms has been an increasing public concern. Novel antimicrobial biomaterials with highly controllable fabrication and functionalization have been proven to be promising candidates. However, previous reviews have generally emphasized the physicochemical properties, action mode, and application effectiveness of those biomaterials, whereas insufficient attention has been given to the design rationales tailored to different infection types and application scenarios. To offer guidance for better diversification and functionalization of anti-oral-biofilm biomaterials, this review details the up-to-date design rationales in three aspects: the core strategies in combating oral biofilm, as well as the biomaterials with advanced antibiofilm capacity and multiple functions based on the improvement or combination of the abovementioned antimicrobial strategies. Thereafter, insights on the existing challenges and future improvement of biomaterial-assisted oral biofilm treatments are proposed, hoping to provide a theoretical basis and reference for the subsequent design and application of antibiofilm biomaterials.

A novel strategy to enhance photocatalytic killing of foodborne pathogenic bacteria by modification of non-metallic monomeric black phosphorus with Elaeagnus mollis polysaccharides

New antibacterial agents are needed to overcome the challenges of microbial food contamination. In this study, we investigated the potential of Elaeagnus mollis polysaccharide (EMP) to modify black phosphorus (BP) for use as a bactericide for foodborne pathogenic bacteria. The resulting compound (EMP-BP) displayed enhanced stability and activity compared with BP. EMP-BP exhibited an increased antibacterial activity (bactericidal efficiency of 99.999 % after 60 min of light exposure) compared to EMP and BP. Further studies revealed that photocatalytically generated reactive oxygen species (ROS) and active polysaccharides acted collectively on the cell membrane, leading to cell deformation and death. Furthermore, EMP-BP inhibited biofilm formation and reduced expression of virulence factors of Staphylococcus aureus, and material hemolysis and cytotoxicity tests prove that the material had good biocompatibility. In addition, bacteria treated with EMP-BP remained highly sensitive to antibiotics and did not develop significant resistance. In summary, we report an environmentally friendly method for controlling pathogenic foodborne bacteria that is efficient and apparently safe.

Visible-light-induced strong oxidation capacity of metal-free carbon nanodots through photo-induced surface reduction for photocatalytic antibacterial and tumor therapy

Biocompatible metal-free carbon dots (CDs) with good photo-induced strong oxidation capacity in aqueous solutions are scarce for high-performance photocatalytic antibacterial and tumor therapy. In this work, we achieved effective visible light-induced cell death and antibacterial performance based on biocompatible metal-free CDs. The visible-light-induced reducing ability of the surface electron-withdrawing structure of the CDs allowed for the remaining photo-induced holes with high oxidation capacity to oxidize water molecules and generate hydroxyl radicals. Antibiotic-resistant bacteria were effectively inhibited by the CDs under xenon lamp irradiation with 450 nm long pass filter. Moreover, CD-based tumor photocatalytic therapy in mice was achieved using a xenon lamp with 450 nm long pass filter (0.3 W cm^-2).

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Non-Metal-Doped Porous Carbon Nitride Nanostructures for Photocatalytic Green Hydrogen Production

Photocatalytic green hydrogen (H2) production through water electrolysis is deemed as green, efficient, and renewable fuel or energy carrier due to its great energy density and zero greenhouse emissions. However, developing efficient and low-cost noble-metal-free photocatalysts remains one of the daunting challenges in low-cost H2 production. Porous graphitic carbon nitride (gCN) nanostructures have drawn broad multidisciplinary attention as metal-free photocatalysts in the arena of H2 production and other environmental remediation. This is due to their impressive catalytic/photocatalytic properties (i.e., high surface area, narrow bandgap, and visible light absorption), unique physicochemical durability, tunable electronic properties, and feasibility to synthesize in high yield from inexpensive and earth-abundant resources. The physicochemical and photocatalytic properties of porous gCNs can be easily optimized via the integration of earth-abundant heteroatoms. Although there are various reviews on porous gCN-based photocatalysts for various applications, to the best of our knowledge, there are no reviews on heteroatom-doped porous gCN nanostructures for the photocatalytic H2 evolution reaction (HER). It is essential to provide timely updates in this research area to highlight the research related to fabrication of novel gCNs for large-scale applications and address the current barriers in this field. This review emphasizes a panorama of recent advances in the rational design of heteroatom (i.e., P, O, S, N, and B)-doped porous gCN nanostructures including mono, binary, and ternary dopants for photocatalytic HERs and their optimized parameters. This is in addition to H2 energy storage, non-metal configuration, HER fundamental, mechanism, and calculations. This review is expected to inspire a new research entryway to the fabrication of porous gCN-based photocatalysts with ameliorated activity and durability for practical H2 production.

Enabling Antibacterial and Antifouling Coating via Grafting of a Nitric Oxide-Releasing Ionic Liquid on Silicone Rubber

Infections caused by bacteria and biofilms on the surfaces of biomedical devices and implants pose serious threats to public health. Herein, a nitric oxide (NO) gas-releasing quaternary ammonium-type ionic liquid (IL)-based coating on polydimethylsiloxane (PDMS), PDIL-NO, with effective and long-acting antibacterial and antifouling properties was prepared. N-(2-((2, 3-Dimethylbut-3-enoyl)oxy)ethyl)-N, N-dimethyloctan-1-aminium bromide (IL-Br), and 2-methyl-2-propenoic acid 2-(2-methoxyethoxy) ethyl ester were covalently grafted onto the surfaces of PDMS by a thiol-ene click chemical reaction, followed by incorporation of l-proline anions (Pro^-) through anion exchange with Br^- to adsorb NO gas. The prepared PDIL-NO showed a prolonged NO-releasing time (>1440 min) and a relatively high concentration (88 μM). Additionally, PDIL-NO possessed good and long-term antimicrobial activity, and could effectively reduce the adsorption of bovine serum albumin and adhesion of bacteria, as well as inhibit wound infection and reduce inflammation in vivo due to the synergetic effect of IL and the released NO. This study may provide a new approach to combat bacterial infections associated with biomedical devices and implants.