Advanced microscopy techniques to assess solid-state properties of inhalation medicines

Nanoscale colocalized thermal and chemical mapping of pharmaceutical powder aerosols

Inhalation of pharmaceutical aerosol formulations is widely used to treat respiratory diseases. Spatially resolved thermal characterization offers promise for better understanding drug release rates from particles; however, this has been an analytical challenge due to the small particle size (from a few micrometers down to nanometers) and the complex composition of the formulations. Here, we employ nano-thermal analysis (nanoTA) to probe the nanothermal domain of a pharmaceutical aerosol formulation containing a mixture of fluticasone propionate (FP), salmeterol xinafoate (SX), and excipient lactose, which is widely used to treat asthma and chronic obstructive pulmonary disease (COPD). Furthermore, atomic force microscopy-infrared spectroscopy (AFM-IR) and AFM force measurements are performed to provide nanochemical and nanomechanical information to complement the nanothermal data. The colocalized thermal and chemical mapping clearly reveals the surface heterogeneity of the drugs in the aerosol particles and demonstrates the contribution of the surface chemical composition to the variation in the thermal properties of the particles. We present a powerful analytical approach for in-depth characterization of thermal/chemical/morphological properties of dry powder inhaler particles at micro- and nanometer scales. This approach can be used to facilitate the comparison between generics and reference inhalation products and further the development of high-performance pharmaceutical formulations.

Controlling the performance of adhesive mixtures for inhalation using mixing energy

A concept of mixing energy, ME, has been developed and applied to blending of adhesive mixtures for inhalation in a high shear blender. Six different systems were investigated, four of which included a coating agent. For blends containing a coating agent, it is shown that the applied ME is key to the control of two important functional mechanisms: i) coating of the carrier by the coating agent, and ii) the dispersibility of the active pharmaceutical ingredient (API). The mass of the carrier was identified to be the mass which is relevant to the forces acting during mixing. The dispersibility in terms of the fine particle fraction (FPF) can be expressed as the product of two exponentials which both are functions of ME. The first factor accounts for the initial increase in FPF, while the second accounts for the decrease observed at extensive mixing. For adhesive mixtures without a coating agent, a similar decrease in FPF is observed when high forces are applied during mixing. Mechanistic interpretation of the behavior is provided.

Morphology and microstructural analysis of bioactive-loaded micro/nanocarriers via microscopy techniques; CLSM/SEM/TEM/AFM

Efficient characterization of the physicochemical attributes of bioactive-loaded micro/nano-vehicles is crucial for the successful product development. The introduction of outstanding science-based strategies and techniques makes it possible to realize how the characteristics of the formulation ingredients affect the structural and (bio)functional properties of the final bioactive-loaded carriers. The important points to be solved, at a microscopic level, are investigating how the features of the formulation ingredients affect the morphology, surface, size, dispersity, as well as the particulate interactions within bioactive-comprising nano/micro-delivery systems. This review presents a detailed description concerning the application of advanced microscopy techniques, i.e., confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) in characterizing the attributes of nano/microcarriers for the efficient delivery of bioactive compounds. Furthermore, the fundamental principles of these approaches, instrumentation, specific applications, and the strategy to choose the most proper technique for different carriers has been discussed.

3D characterisation of dry powder inhaler formulations: Developing X-ray micro computed tomography approaches

Carrier-based dry powder inhaler (DPI) formulations need to be accurately characterised for their particle size distributions, surface roughnesses, fines contents and flow properties. Understanding the micro-structure of the powder formulation is crucial, yet current characterisation methods give incomplete information. Commonly used techniques like laser diffraction (LD) and optical microscopy (OM) are limited due to the assumption of sphericity and can give variable results depending on particle orientation and dispersion. The aim of this work was to develop new three dimensional (3D) powder analytical techniques using X-ray computed tomography (XCT) that could be employed for non-destructive metrology of inhaled formulations. α-lactose monohydrate powders with different characteristics have been analysed, and their size and shape (sphericity/aspect ratio) distributions compared with results from LD and OM. The three techniques were shown to produce comparable size distributions, while the different shape distributions from XCT and OM highlight the difference between 2D and 3D imaging. The effect of micro-structure on flowability was also analysed through 3D measurements of void volume and tap density. This study has demonstrated for the first time that XCT provides an invaluable, non-destructive and analytical approach to obtain number- and volume-based particle size distributions of DPI formulations in 3D space, and for unique 3D characterisation of powder micro-structure.

Agglomerated novel spray-dried lactose-leucine tailored as a carrier to enhance the aerosolization performance of salbutamol sulfate from DPI formulations

Spray-drying allows to modify the physicochemical/mechanical properties of particles along with their morphology. In the present study, _L-leucine with varying concentrations (0.1, 0.5, 1, 5, and 10% w/v) were incorporated into lactose monohydrate solution for spray-drying to enhance the aerosolization performance of dry powder inhalers containing spray-dried lactose-leucine and salbutamol sulfate. The prepared spray-dried lactose-leucine carriers were analyzed using laser diffraction (particle size), differential scanning calorimetry (thermal behavior), scanning electron microscopy (morphology), powder X-ray diffraction (crystallinity), Fourier transform infrared spectroscopy (interaction at molecular level), and in vitro aerosolization performance (deposition). The results showed that the efficacy of salbutamol sulfate’s aerosolization performance was, in part, due to the introduction of _L-leucine in the carrier, prior to being spray-dried, accounting for an increase in the fine particle fraction (FPF) of salbutamol sulfate from spray-dried lactose-leucine (0.5% leucine) in comparison to all other carriers. It was shown that all of the spray-dried carriers were spherical in their morphology with some agglomerates and contained a mixture of amorphous, α-lactose, and β-lactose. It was also interesting to note that spray-dried lactose-leucine particles were agglomerated during the spray-drying process to make coarse particles (volume mean diameter of 79 to 87 μm) suitable as a carrier in DPI formulations.

The Future of Pharmaceutical Manufacturing Sciences

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular-based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed.

Insights into the multifaceted application of microscopic techniques in plant tissue culture systems

Microscopic techniques remain an integral tool which has allowed for the better understanding and manipulation of in vitro plant culture systems. The recent advancements will inevitably help to unlock the long-standing mysteries of fundamental biological mechanisms of plant cells. Beyond the classical applications in micropropagation aimed at the conservation of endangered and elite commercial genotypes, plant cell, tissue and organ cultures have become a platform for elucidating a myriad of fundamental physiological and developmental processes. In conjunction with microscopic techniques, in vitro culture technology has been at the centre of important breakthroughs in plant growth and development. Applications of microscopy and plant tissue culture have included elucidation of growth and development processes, detection of in vitro-induced physiological disorders as well as subcellular localization using fluorescent protein probes. Light and electron microscopy have been widely used in confirming the bipolarity of somatic embryos during somatic embryogenesis. The technique highlights basic anatomical, structural and histological evidence for in vitro-induced physiological disorders during plant growth and development. In this review, we discuss some significant biological insights in plant growth and development, breakthroughs and limitations of various microscopic applications and the exciting possibilities offered by emergent in vivo live imaging and fluorescent protein engineering technologies.