Technological solutions for long-term storage of partially used nuclear waste: A critical review

A Study on the Separation of Nitric Acid and Acetic Acid from Simulated Reprocessing Waste by TBP Extraction

The PUREX process is a key technology for spent fuel reprocessing, designed to selectively recover uranium and plutonium mainly through multiple chemical separation stages, minimizing high-level waste. Acetohydroxamic acid (AHA) enhances selectivity in this process but decomposes into acetic acid (HAc), which disrupts chemical equilibrium and reduces extraction efficiency. This study examines the extraction and separation of nitric acid (HNO3) and HAc using 30% tributyl phosphate in organic kerosene (TBP-OK) under various conditions. Results show that 30%TBP-OK preferentially extracts HAc over HNO3, especially in the low acid concentration range (HNO₃ < 1 mol/L, HAc < 0.2 mol/L). The selectivity coefficient drops from 3.05 in a 0.5 mol/L HNO3-0.1 mol/L HAc system to 2.18 in a 1 mol/L HNO3-0.2 mol/L HAc system. TBP forms stable 1:1 complexes with both acids, with equilibrium constants around 0.85 under typical conditions. Increasing TBP concentration enhances HNO3 extraction, while phase ratio adjustments improve HAc separation. A 16-stage countercurrent extraction simulation confirms that optimizing these factors effectively separates HNO3 and HAc, offering theoretical and technical support for refining the PUREX process.

Extraction and Complexation of Fission Products with Unsymmetrical Phenanthroline Diamide Ligands from Simulated High-Level Liquid Waste

The extraction performance and complexation properties between some typical fission products (FPs) with phenanthroline-based ligands N2,N,2N9-triethyl-N9-tolyl-1,10-phenanthroline-2,9-dicarboxamide (DE-ET-DAPhen) and N2-ethyl-N,9N9-dioctyl-N2-tolyl-1,10-phenanthroline-2,9-dicarboxamide (DO-ET-DAPhen) were described in this work. The low distributions of Ln(III) observed in the solvent extraction study showed the potential of the ligands for the separation of actinides and lanthanides in high-level liquid waste (HLLW). Further extraction studies on other FPs showed that the ligands could efficiently extract Pd(II) and Cd(II) using n-octanol as a diluent. Various methods including slope analysis, 1H NMR titration, UV-vis spectroscopic titration, and single-crystal X-ray diffraction were adopted to explore the complexation behavior of the ligands with target metal ions. The complexation study results indicated that the ligands formed 1:1 complexes with Ln(III) in single-phase solutions, while 1:1 and 2:1 complexes with Cd(II) and Pd(II) were detected. Meanwhile, the stability constants (log β) of the complexes measured through UV-vis spectroscopic titration were reported. According to the diffraction data of the single crystals, the complex structures of [Ln(DE-ET-DAPhen)(NO3)3] (Ln = La, Tb, and Lu) and [Cd2(DE-ET-DAPhen)2(NO3)4] were proposed. The systematic study of the extraction and interaction between some typical FPs with the ligands provides a comprehensive understanding of the ligands' properties, which contribute to the development of the application process of the ligands in the reprocessing of HLLW.

Understanding solvent polarity effects on the separation of uranyl porphyrin-derivative complexes

Solvation is a crucial task in developing efficient and selective extractants for actinide elements, but an understanding and perspective of solvent effects on the extraction of uranyl are still lacking. Herein, we present investigations into solvent effects on the geometry, stability and bonding properties of five uranyl porphyrin derivative complexes (UO2(L)) in four solvents via relativistic quantum chemical calculations, and reveal some trends in the influence of solvent polarity on uranyl compounds. All five [L]2- ligands equatorially coordinate [UO2]2+ in a hexa-dentate (κ6) fashion. Thus, the uranium center is bound to six N atoms by U-N bonds, and the properties of the U-N bond are affected by the ligands rather than by the solvent. The relative stability of these UO2(L) complexes is obviously affected by the solvent polarity; lower polar solvents stabilize more UO2(L) complexes from higher polar solvents, resulting in more extensive interaction of U-N. By computing the reaction energy, we track the conversion of pure [UO2]2+ to UO2(L) complexes in different solvents; the uranyl dipentafluorobenziamethyrin species exhibit the greatest selectivity to higher polarity solvents, with significant orbital interactions of U-N accounting for this stability and selectivity. This study provides a general procedure for theoretical screening of the binding ability and solvent selectivity of macrocyclic ligands towards uranyl, and searching for suitable ligands and solvents that will later be applied in nuclear science disciplines.

(Re)integrating radioactive materials and waste into a global sustainable development context

The 17 Sustainable Development Goals (SDGs) of the United Nations, established in 2015, aim to achieve global sustainability by 2030 through the improvement of environmental, social, and economic parameters. However, unlike earlier concepts such as the Agenda 21 of 1992, the SDGs overlook radioactive waste management and related challenges of radiation itself. First, we investigate the historic consideration and unexplained disappearance of radioactive waste in earlier sustainability concepts. Then, we propose amending seven SDGs to address this gap. For SDGs 6 (Clean Water and Sanitation), 14 (Life Below Water), and 15 (Life on Land), new or revised indicators should monitor the release of hazardous materials. SDGs 9 (Industry, Innovation and Infrastructure), 16 (Peace, Justice and Strong Institutions), and 17 (Partnerships for the Goals) require additional targets and indicators to integrate international cooperation and social implications of nuclear facilities' operation. Redefining "hazardous waste" in SDG 12 (Responsible Consumption and Production) and "environmentally sound technologies" in SDG 17 is necessary to encompass radioactive waste. Implementing these changes demands statistical efforts, but the existing monitoring infrastructure, particularly in Europe and North America, can facilitate this. As 2030 approaches, it is crucial to reintroduce radioactive waste management into sustainability agendas, whether within the SDGs themselves or in a subsequent framework.

Study on uranium leaching from uranium purification residue with ammonium hydrogen fluoride

Residues generated from the uranium purification process, characterized by a high uranium content, pose a significant challenge for recovery through leaching and present a considerable environmental threat. After using XRD and SEM-mapping characterization analysis combined with the BCR continuous graded extraction test to analyze the content of different states of uranium, it was found that the main reason why the uranium in the residue was difficult to leach because it was encapsulated by SiO2 crystals. Using NH4HF2 as a leaching agent, a leaching study of uranium in the residue was carried out, and the results showed that the H+ and F- produced by NH4HF2could react with SiO2, destroying the crystal lattice of SiO2 and causing the encapsulated uranium to come into contact with the leaching agent, facilitating the leaching of uranium in the residue. The optimum conditions for uranium leaching were 10% mass fraction of NH4HF2, a liquid-solid ratio of 30:1, a reaction temperature of 30 °C and a reaction time of 120 min, and the leaching efficiency of uranium from the residue was as high as 98.95%. The leaching kinetics of uranium by NH4HF2 were consistent with the mixed controlled model in the shrinking core models, indicating that the surface chemical reaction and mass diffusion dominated both uranium leaching processes. This may provide a viable method for resource recovery and the treatment of uranium purification residues.

Ultrafast Removal of Thorium and Uranium from Radioactive Waste and Groundwater Using Highly Efficient and Radiation-Resistant Functionalized Triptycene-Based Porous Organic Polymers

Thorium (Th) and uranium (U) are important strategic resources in nuclear energy-based heavy industries such as energy and defense sectors that also generate significant radioactive waste in the process. The management of nuclear waste is therefore of paramount importance. Contamination of groundwater/surface water by Th/U is increasing at an alarming rate in certain geographical locations. This necessitates the development of strategic adsorbent materials with improved performance for capturing Th/U species from radioactive waste and groundwater. This report describes the design of a unique, robust, and radiation-resistant porous organic polymer (POP: TP-POP-SO3NH4), which demonstrates ultrafast removal of Th(IV) (<30 s)/U(VI) (<60 s) species present in simulated radioactive wastewater/groundwater samples. Thermal, chemical, and radiation stabilities of these POPs were studied in detail. The synthesized ammoniated POP revealed exceptional capture efficiency for trace-level Th (<4 ppb) and U (<3 ppb) metal ions through the cation-exchange mechanism. TP-POP-SO3NH4 shows a significant sorption capacity [Th (787 mg/g) and U (854 mg/g)] with an exceptionally high distribution coefficient (Kd) of 107 mL/g for Th. This work also demonstrates a facile protocol to convert a nonperforming POP, by simple chemical modifications, into a superfast adsorbent for efficient uptake/removal of U/Th.

Effect of thermal treatment on microcracking characteristics of granite under tensile condition based on bonded-particle model and moment tensor

It is known that the heterogeneity caused by thermally induced micro-cracks and thermal stress can affect the mechanical behavior of granite. The laboratory-scale tests have the intrinsic limitation of non-repeatability and lack of effective methods to characterize the interaction effect between thermal micro-cracks and thermal stresses. In this study, we demonstrate how advancements in particle bonded model and moment tensor can help better understand the roles of high temperature in weakening granite and thermally induced cracking process in Brazilian test. Our results show that the types of micro-cracks (intergranular, intragranular, and transcrystalline ones) are related to their thermal expansion coefficients of mineralogical compositions. The intergranular tensile micro-cracks are predominant during the heating and heating-cooling processes. An obvious weakening of granite and non-central initiation is associated with the heterogeneity caused by the thermal damage and thermal stress. We also quantitatively evaluate the thermal damage based on orientation distribution, b-value, and nature of the sources, which gives a new microcracking perspective on tensile characteristics subjected to high temperature.

Research on the Properties of Wasteforms after Direct Involvement of Uranium-Containing Silica Gel in Glass Network Formation

Uranium-containing silica gel (UCSG) is a secondary waste generated during the advanced treatment of nuclear wastewater. In order to reduce the growing storage pressure for UCSG, from the perspective of building a borosilicate glass network, UCSG was used to replace SiO2 in the glass-cured formula to directly achieve the immobilization of UCSG. SEM-EDS results showed that uranium was uniformly distributed in the matrix, and the maximum solid solubility of UCSG (two components: silica gel and uranyl ions) in the formula was as high as 55 wt %. At the same time, TG-MS proved that silica gel lost OH groups (down about 4.61 wt %) and formed Si-O-Si bond by condensation. FT-IR and XPS proved a change in the number of Si-O-Si bond, and new Si-O-B and Si-O-Al bond appeared on the spectrum. This was evidence that silica gel could self-involved participate in the construction of glass networks. EPR analysis obtained the changes in the coordination environment of U atom, the U atom decreased spin electrons number in the glass than in uranyl crystals. The glass also has good physical properties (hardness: 6.51 ± 0.23 GPa; density: 2.3977 ± 0.0056 g/cm3) and chemical durability (normalized leaching rate: LRU = 2.34 × 10-4 ± 2.05 × 10-6 g·m2·days-1 after 42 days), this research provided tactics for simple treatment of uranium-containing silica gel in one step.

Source, occurrence, distribution, fate, and implications of microplastic pollutants in freshwater on environment: A critical review and way forward

The generation of microplastics (MPs) has increased recently and become an emerging issue globally. Due to their long-term durability and capability of traveling between different habitats in air, water, and soil, MPs presence in freshwater ecosystem threatens the environment with respect to its quality, biotic life, and sustainability. Although many previous works have been undertaken on the MPs pollution in the marine system recently, none of the study has covered the scope of MPs pollution in the freshwater. To consolidate scattered knowledge in the literature body into one place, this work identifies the sources, fate, occurrence, transport pathways, and distribution of MPs pollution in the aquatic system with respect to their impacts on biotic life, degradation, and detection techniques. This article also discusses the environmental implications of MPs pollution in the freshwater ecosystems. Certain techniques for identifying MPs and their limitations in applications are presented. Through a literature survey of over 276 published articles (2000-2023), this study presents an overview of solutions to the MP pollution, while identifying research gaps in the body of knowledge for further work. It is conclusive from this review that the MPs exist in the freshwater due to an improper littering of plastic waste and its degradation into smaller particles. Approximately 15-51 trillion MP particles have accumulated in the oceans with their weight ranging between 93,000 and 236,000 metric ton (Mt), while about 19-23 Mt of plastic waste was released into rivers in 2016, which was projected to increase up to 53 Mt by 2030. A subsequent degradation of MPs in the aquatic environment results in the generation of NPs with size ranging from 1 to 1000 nm. It is expected that this work facilitates stakeholders to understand the multi-aspects of MPs pollution in the freshwater and recommends policy actions to implement sustainable solutions to this environmental problem.

Challenges and opportunities for biochar to promote circular economy and carbon neutrality

Biochar, derived from unused biomass, is widely considered for its potential to deal with climate change problems. Global interest in biochar is attributed to its ability to sequester carbon in soil and to remediate aquatic environment from water pollution. As soil conditioner and/or adsorbent, biochar offers opportunity through a circular economy (CE) paradigm. While energy transition continues, progress toward low-emissions materials accelerates their advance towards net-zero emissions. However, none of existing works addresses CE-based biochar management to achieve carbon neutrality. To reflect its novelty, this work provides a critical overview of challenges and opportunities for biochar to promote CE and carbon neutrality. This article also offers seminal perspectives about strengthening biomass management through CE and resource recovery paradigms, while exploring how the unused biomass can promote net zero emissions in its applications. By consolidating scattered knowledge in the body of literature into one place, this work uncovers new research directions to close the loops by implementing the circularity of biomass resources in various fields. It is conclusive from a literature survey of 113 articles (2003-2023) that biomass conversion into biochar can promote net zero emissions and CE in the framework of the UN Sustainable Development Goals (SDGs). Depending on their physico-chemical properties, biochar can become a suitable feedstock for CE. Biochar application as soil enrichment offsets 12% of CO₂ emissions by land use annually. Adding biochar to soil can improve its health and agricultural productivity, while minimizing about 1/8 of CO₂ emissions. Biochar can also sequester CO₂ in the long-term and prevent the release of carbon back into the atmosphere after its decomposition. This practice could sequester 2.5 gigatons (Gt) of CO₂ annually. With the global biochar market reaching USD 368.85 million by 2028, this work facilitates biochar with its versatile characteristics to promote carbon neutrality and CE applications.

Trends in the Electronic Structure and Chemical Bonding of a Series of Porphyrinoid-Uranyl Complexes

In this paper, we have explored the relativistic density functional theory study on a series of deprotonated porphyrinoid (Lⁿ) complexes of uranyl to investigate the geometrical structures and chemical bonding. The ligands bound with uranyl in the 1:1 complexes [UO₂(Lⁿ)]^x (n = 4, 5, 6; x = 0, -1, -2), showing more thermodynamic stability for "in-cavity" structures of L⁵ and L⁶ than that of the "side-on" structure of L⁴ and an increase in stability with the increase of negative charges, L^2- < L^3- < L^4-. Among the six ligands, the cyclo[6]pyrrole presents the best selectivity toward uranyl. Based on chemical bonding analyses, the U-N_L bond in the in-cavity complexes adopts a typical dative N_L → U bond with mainly ionic bonding and significant covalency, which comes from the significant orbital interaction of U 5f_ϕ6d_δ7s hybrid AOs and N_L 2p-based MOs. This work provides a systematic understanding of the coordination chemistry in uranyl pyrrole-containing macrocycle complexes and the nature of chemical bonding in such systems, which may provide inspirations for the future design of synthetic targets that could be relevant to actinide separations or in the remediation of spent nuclear fuel.

Radioactivity: Sustainable Materials and Innovative Techniques

Radioisotopes, also known as radionuclides, are atoms with unstable nuclei that emit ionizing radiation [...]

Influence of Fe2O3 and bacterial biofilms on Cu(II) distribution in a simulated aqueous solution: A feasibility study to sediments in the Pearl River Estuary (PR China)

This study investigated physico-chemical interactions among Cu(II), biogenic materials, and Fe₂O₃ in a continuous-flow biofilm reactor system under a well-controlled environment. The effects of Fe₂O₃ and bacterial biofilms on the distribution of Cu(II) in a simulated aquatic environment were studied. To control biological and abiotic elements in the marine environment, a biofilm reactor was designed to understand the metal speciation of Cu(II) and its distribution. The reactor consisted of a biofilm chamber equipped with glass slides for biofilms attachment. Due to its ability to grow as biofilm in the medium, Pseudomonas atlantica was cultivated to adsorb trace Cu(II) to attached and suspended cells. It was found that biofilms with 170-285 mequiv chemical oxygen demand (COD) concentration/m² of total oxidizable materials accelerated the Cu(II) adsorption to the surface of the reactor significantly by a factor of five. A significant inhibition to the bacterial growth took place (p ≤ 0.05; t-test) when Cu(II) concentration was higher than 0.5 mg/L. In the absence of Cu(II), bacterial cells grew normally to 0.075 of optical density (OD). However, at the Cu(II) concentration of 0.2 mg/L, the cells grew to a lower OD of 0.58. The presence of glycine and EDTA substantially reduced the toxicity of Cu(II) on bacterial growth (p ≤ 0.05; paired t-test). Their complexation with Cu(II) rendered the metal ions less available to bacterial cells. This implies that the Fe₂O₃ and bacterial biofilm affected Cu(II) distribution and speciation in the aquatic environment.

Macro-nutrients recovery from liquid waste as a sustainable resource for production of recovered mineral fertilizer: Uncovering alternative options to sustain global food security cost-effectively

Global food security, which has emerged as one of the sustainability challenges, impacts every country. As food cannot be generated without involving nutrients, research has intensified recently to recover unused nutrients from waste streams. As a finite resource, phosphorus (P) is largely wasted. This work critically reviews the technical applicability of various water technologies to recover macro-nutrients such as P, N, and K from wastewater. Struvite precipitation, adsorption, ion exchange, and membrane filtration are applied for nutrient recovery. Technological strengths and drawbacks in their applications are evaluated and compared. Their operational conditions such as pH, dose required, initial nutrient concentration, and treatment performance are presented. Cost-effectiveness of the technologies for P or N recovery is also elaborated. It is evident from a literature survey of 310 published studies (1985-2022) that no single technique can effectively and universally recover target macro-nutrients from liquid waste. Struvite precipitation is commonly used to recover over 95 % of P from sludge digestate with its concentration ranging from 200 to 4000 mg/L. The recovered precipitate can be reused as a fertilizer due to its high content of P and N. Phosphate removal of higher than 80 % can be achieved by struvite precipitation when the molar ratio of Mg²⁺/PO₄^3- ranges between 1.1 and 1.3. The applications of artificial intelligence (AI) to collect data on critical parameters control optimization, improve treatment effectiveness, and facilitate water utilities to upscale water treatment plants. Such infrastructure in the plants could enable the recovered materials to be reused to sustain food security. As nutrient recovery is crucial in wastewater treatment, water treatment plant operators need to consider (1) the costs of nutrient recovery techniques; (2) their applicability; (3) their benefits and implications. It is essential to note that the treatment cost of P and/or N-laden wastewater depends on the process applied and local conditions.

Functionalized maghemite nanoparticles for enhanced adsorption of uranium from simulated wastewater and magnetic harvesting

Maghemite (γ-Fe₂O₃) nanoparticles (MNPs) were functionalized with 3-aminopropyltriethoxysilane (APTES) to give APTES@Fe₂O₃ (AMNP) which was then reacted with diethylenetriamine-pentaacetic acid (DTPA) to give a nanohybrid DTPA-APTES@Fe₂O₃ (DAMNP). Nano-isothermal titration calorimetry shows that DTPA complexation with uranyl ions in water is exothermic and has a stoichiometry of two DTPA to three uranyl ions. Density functional theory calculations indicate the possibility of several complexes between DTPA and UO₂²⁺ with different stoichiometries. Interactions between uranyl ions and DAMNP functional groups are revealed by X-photoelectron and Fourier transform infrared spectroscopies. Spherical aberration-corrected Scanning Transmission Electron Microscopy visualizes uranium on the particle surface. Adsorbent performance metrics were evaluated by batch adsorption studies under different conditions of pH, initial uranium concentration and contact time, and the results expressed in terms of equilibrium adsorption capacities (q_e) and partition coefficients (PC). By either criterion, performance increases from MNP to AMNP to DAMNP, with the maximum uptake at pH 5.5 in all cases: MNP, q_e = 63 mg g^-1, PC = 127 mg g^-1 mM^-1; AMNP, q_e = 165 mg g^-1, PC = 584 mg g^-1 mM^-1; DAMNP, q_e = 249 mg g^-1, PC = 2318 mg g^-1 mM^-1 (at 25 °C; initial U concentration 0.63 mM; 5 mg adsorbent in 10 mL of solution; contact time, 3 h). The pH maximum is related to the predominance of mono- and di-cationic uranium species. Uptake by DAMNPs follows a pseudo-first-order or pseudo-second-order kinetic model and fits a variety of adsorption models. The maximum adsorption capacity for DAMNPs is higher than for other functionalized magnetic nanohybrids. This adsorbent can be regenerated and recycled for at least 10 cycles with less than 10% loss in activity, and shows high selectivity. These findings suggest that DAMNP could be a promising adsorbent for the recovery of uranium from nuclear wastewaters.

Biosorption of heavy metals from aqueous solutions using activated sludge, Aeromasss hydrophyla, and Branhamella spp based on modeling with GEOCHEM

This work tests the technical applicability of sewage sludge and isolated dead cells of Aeromasss hydrophyla and Branhamella spp for the elimination of inorganic pollutants such as Zn(II), Pb(II), Cd(II), and/or Cu(II) using synthetic wastewater with their initial concentrations of 100 mg/L, respectively. The sludge samples were collected from local sewage treatment plants. The effects of dose and pH on heavy metals removal were evaluated in batch studies and their removal performances were compared to those of previous studies. Both the Freundlich and the Langmuir models were plotted to study their biosorption using activated sludge and the bacteria. Isotherm data, resulting from the batch studies, were compared to the modeling results of Geochem. It was evident that the activated sludge could achieve 99% of Zn(II), Cd(II), Cu(II) and Pb(II) removal with 100 mg/L of concentration at pH 6.0 and 3 g/L of dose. Under the same conditions, 97% of Cd(II), Cu(II) and/or Pb(II) was removed by Aeromasss hydrophyla and Branhamella spp, as indicated by their adsorption capacities (activated sludge: 99.07 mg Pb²⁺/g; dewatered sludge: 57.15 mg Pb²⁺/g; digested sludge: 83.58 mg Pb²⁺/g; 24.47 mg Cd²⁺/g; Aeromasss hydrophylla: 71.91 mg Pb²⁺/g; Branhamella spp: 37.52 mg Cu²⁺/g). Of the four heavy metals studied, Pb(II) had the highest metal adsorption capacity for all adsorbents studied (Pb²⁺>Cu²⁺> Cd²⁺>Zn²⁺). The modeling results of the Geochem fitted well with the isotherm data of the batch studies at varying concentrations from 20 to 100 mg/L. The thermodynamic constant at pH 4 were comparable to those obtained from previous works. This indicates a reliable prediction over varying metal concentrations and pHs of the batch studies. In spite of the promising results, the treated effluents still could not meet the required effluent limits set by local legislation. Therefore, it is necessary to subsequently treat the samples using biological processes such as activated sludge.

α-Aminophosphonates, -Phosphinates, and -Phosphine Oxides as Extraction and Precipitation Agents for Rare Earth Metals, Thorium, and Uranium: A Review

α-Aminophosphonates, -phosphinates, and -phosphine oxides are a group of organophosphorus compounds that were investigated as extraction agents for rare earth (RE) metals and actinoids for the first time in the 1960s. However, more systematic investigations of their extraction properties towards REs and actinoids were not started until the 2010s. Indeed, recent studies have shown that these α-amino-functionalized compounds can outperform the commercial organophosphorus extraction agents in RE separations. They have also proven to be very efficient extraction and precipitation agents for recovering Th and U from RE concentrates. These actinoids coexist with REs in some of the commercially important RE-containing minerals. The efficient separation and purification of REs is becoming more and more important every year as these elements have a pivotal role in many existing technologies. If one also considers the facile synthesis of α-amino-functionalized organophosphorus extractants and precipitation agents, it is expected that they will be increasingly utilized in the extraction chemistry of REs and actinoids in the future. This review collates α-aminophosphonates, -phosphinates, and -phosphine oxides that have been utilized in the separation chemistry of REs and actinoids, including their most relevant synthetic routes and molecular properties. Their extraction and precipitation properties towards REs and actinoids are also discussed.

Transformation of Solid Waste Management in China: Moving towards Sustainability through Digitalization-Based Circular Economy

In China, environmental pollution due to municipal solid waste (MSW) over-generation is one of the country’s priority concerns. The increasing volume and complexity of the waste poses serious risks to the environment and public health. Currently, the annual growth of MSW generation is estimated to be approximately 8–10% and will increase to 323 million metric tons (Mt) by 2030. Based on the secondary data collected from a literature survey, this article critically evaluates the recent progress of MSW management (MSWM) in China and offers new insights into the waste sector in the era of Industry 4.0. This helps decision makers in China to plan a smooth transition nationwide to a circular economy (CE) in the waste sector. It is evident that digitalization is a driving force for China to move towards low-carbon development strategies within the framework of CE. Through digitalization, the waste sector has promoted prevention, reduction, reuse, and recycling (3Rs) of waste before waste disposal in landfills. A proper implementation of digitalization-based waste recycling has contributed to an efficient cooperation between the government and private sector, increased job opportunities, and promoted the conservation of resources. It is anticipated that this work not only contributes to the establishment of an integrated MSWM system in China, but also improves local MSWM through digitalization in the framework of a CE.