Bipolar versus high-density surface electromyography for evaluating risk in fatiguing frequency-dependent lifting activities

The assistance of BAZAR robot promotes improved upper limb motor coordination in workers performing an actual use-case manual material handling

This study aims at evaluating upper limb muscle coordination and activation in workers performing an actual use-case manual material handling (MMH). The study relies on the comparison of the workers' muscular activity while they perform the task, with and without the help of a dual-arm cobot (BAZAR). Eleven participants performed the task and the flexors and extensors muscles of the shoulder, elbow, wrist, and trunk joints were recorded using bipolar electromyography. The results showed that, when the particular MMH was carried out with BAZAR, both upper limb and trunk muscular co-activation and activation were decreased. Therefore, technologies that enable human-robot collaboration (HRC), which share a workspace with employees, relieve employees of external loads and enhance the effectiveness and calibre of task completion. Additionally, these technologies improve the worker's coordination, lessen the physical effort required to interact with the robot, and have a favourable impact on his or her physiological motor strategy. Practitioner summary: Upper limb and trunk muscle co-activation and activation is reduced when a specific manual material handling was performed with a cobot than without it. By improving coordination, reducing physical effort, and changing motor strategy, cobots could be proposed as an ergonomic intervention to lower workers' biomechanical risk in industry.

High-density surface electromyography allows to identify risk conditions and people with and without low back pain during fatiguing frequency-dependent lifting activities

Low back pain (LBP) is a leading cause of disability in the workplace, often caused by manually lifting of heavy loads. Instrumental-based assessment tools are used to quantitatively assess the biomechanical risk of lifting activities. This study aims to verify that, during the execution of fatiguing frequency-dependent lifting, high-density surface electromyography (HDsEMG) allows the discrimination of healthy controls (HC) versus people with LBP and biomechanical risk levels. Fifteen HC and eight people with LBP performed three lifting tasks with a progressively increasing lifting index, each lasting 15 min. Erector spinae (ES) activity was recorded using HDsEMG and amplitude parameters were calculated to characterize the spatial distribution of muscle activity. LBP group showed a less ES activity than HC (lower root mean square across the grid and of the activation region) and an involvement of the same muscular area across the task (lower coefficient of variation of the center of gravity of muscle activity). The results indicate the usefulness of HDsEMG parameters to classify risk levels for both HC and LBP groups and to determine differences between them. The findings suggest that the use of HDsEMG could expand the capabilities of existing instrumental-based tools for biomechanical risk classification during lifting activities.

Trunk stability in fatiguing frequency-dependent lifting activities

BACKGROUND

Work-related low-back disorders (WLBDs) are one of the most frequent and costly musculoskeletal conditions. It has been showed that WLBDs may occur when intervertebral or torso equilibrium is altered by a biomechanical perturbations or neuromuscular control error. The capacity to react to such disturbances is heavily determined by the spinal stability, provided by active and passive tissues and controlled by the central nervous system.

RESEARCH QUESTION

This study aims to investigate trunk stability through the Lyapunov's maximum exponent during repetitive liftings in relation to risk level, as well as to evaluate its ability to discriminate these risk levels.

METHODS

Fifteen healthy volunteers performed fatiguing lifting tasks at three different frequencies corresponding to low, medium, and high risk levels according to the National Institute for Occupational Safety and Health (NIOSH) equation. We investigated changes in spinal stability during fatiguing lifting tasks at different risk levels using the maximum Lyapunov's index (λ_Max) computed from trunk accelerations recorded by placing three IMUs at pelvis, lower and upper spine levels. A two-way repeated-measures ANOVA was performed to determine if there was any significant effect on λ_Max among the three risk levels and the time (start, mid, and end of the task). Additionally, we examined the Pearson's correlation of λ_Max with the trunk muscle co-activation, computed from trunk sEMG.

RESULTS

Our findings show an increase in trunk stability with increasing risk level and as the lifting task progressed over time. A negative correlation between λ_Max and trunk co-activation was observed which illustrates that the increase in spinal stability could be partially attributed to increased trunk muscle co-activation.

SIGNIFICANCE

This study highlights the possibility of generating stability measures from kinematic data as risk assessment features in fatiguing tasks which may prove useful to detect the risk of developing work-related low back pain disorders and allow the implementation of early ergonomic interventions.

People with chronic low back pain display spatial alterations in high-density surface EMG-torque oscillations

We quantified the relationship between spatial oscillations in surface electromyographic (sEMG) activity and trunk-extension torque in individuals with and without chronic low back pain (CLBP), during two submaximal isometric lumbar extension tasks at 20% and 50% of their maximal voluntary torque. High-density sEMG (HDsEMG) signals were recorded from the lumbar erector spinae (ES) with a 64-electrode grid, and torque signals were recorded with an isokinetic dynamometer. Coherence and cross-correlation analyses were applied between the filtered interference HDsEMG and torque signals for each submaximal contraction. Principal component analysis was used to reduce dimensionality of HDsEMG data and improve the HDsEMG-based torque estimation. sEMG-torque coherence was quantified in the δ(0–5 Hz) frequency bandwidth. Regional differences in sEMG-torque coherence were also evaluated by creating topographical coherence maps. sEMG-torque coherence in the δ band and sEMG-torque cross-correlation increased with the increase in torque in the controls but not in the CLBP group (p = 0.018, p = 0.030 respectively). As torque increased, the CLBP group increased sEMG-torque coherence in more cranial ES regions, while the opposite was observed for the controls (p = 0.043). Individuals with CLBP show reductions in sEMG-torque relationships possibly due to the use of compensatory strategies and regional adjustments of ES-sEMG oscillatory activity.

Centre of pressure parameters for the assessment of biomechanical risk in fatiguing frequency-dependent lifting activities

Lifting tasks, among manual material handling activities, are those mainly associated with low back pain. In recent years, several instrumental-based tools were developed to quantitatively assess the biomechanical risk during lifting activities. In this study, parameters related to balance and extracted from the Centre of Pressure (CoP) data series are studied in fatiguing frequency-dependent lifting activities to: i) explore the possibility of classifying people with LBP and asymptomatic people during the execution of task; ii) examine the assessment of the risk levels associated with repetitive lifting activities, iii) enhance current understanding of postural control strategies during lifting tasks. Data were recorded from 14 asymptomatic participants and 7 participants with low back pain. The participants performed lifting tasks in three different lifting conditions (with increasing lifting frequency and risk levels) and kinetic and surface electromyography (sEMG) data were acquired. Kinetic data were used to calculated the CoP and parameters extracted from the latter show a discriminant capacity for the groups and the risk levels. Furthermore, sEMG parameters show a trend compatible with myoelectric manifestations of muscular fatigue. Correlation results between sEMG and CoP velocity parameters revealed a positive correlation between amplitude sEMG parameters and CoP velocity in both groups and a negative correlation between frequency sEMG parameters and CoP velocity. The current findings suggest that it is possible to quantitatively assess the risk level when monitoring fatiguing lifting tasks by using CoP parameters as well as identify different motor strategies between people with and without LBP.

Fundamental Concepts of Bipolar and High-Density Surface EMG Understanding and Teaching for Clinical, Occupational, and Sport Applications: Origin, Detection, and Main Errors

Surface electromyography (sEMG) has been the subject of thousands of scientific articles, but many barriers limit its clinical applications. Previous work has indicated that the lack of time, competence, training, and teaching is the main barrier to the clinical application of sEMG. This work follows up and presents a number of analogies, metaphors, and simulations using physical and mathematical models that provide tools for teaching sEMG detection by means of electrode pairs (1D signals) and electrode grids (2D and 3D signals). The basic mechanisms of sEMG generation are summarized and the features of the sensing system (electrode location, size, interelectrode distance, crosstalk, etc.) are illustrated (mostly by animations) with examples that teachers can use. The most common, as well as some potential, applications are illustrated in the areas of signal presentation, gait analysis, the optimal injection of botulinum toxin, neurorehabilitation, ergonomics, obstetrics, occupational medicine, and sport sciences. The work is primarily focused on correct sEMG detection and on crosstalk. Issues related to the clinical transfer of innovations are also discussed, as well as the need for training new clinical and/or technical operators in the field of sEMG.

Trunk Muscle Coactivation in People with and without Low Back Pain during Fatiguing Frequency-Dependent Lifting Activities

Lifting tasks are manual material-handling activities and are commonly associated with work-related low back disorders. Instrument-based assessment tools are used to quantitatively assess the biomechanical risk associated with lifting activities. This study aims at highlighting different motor strategies in people with and without low back pain (LBP) during fatiguing frequency-dependent lifting tasks by using parameters of muscle coactivation. A total of 15 healthy controls (HC) and eight people with LBP performed three lifting tasks with a progressively increasing lifting index (LI), each lasting 15 min. Bilaterally erector spinae longissimus (ESL) activity and rectus abdominis superior (RAS) were recorded using bipolar surface electromyography systems (sEMG), and the time-varying multi-muscle coactivation function (TMCf) was computed. The TMCf can significantly discriminate each pair of LI and it is higher in LBP than HC. Collectively, our findings suggest that it is possible to identify different motor strategies between people with and without LBP. The main finding shows that LBP, to counteract pain, coactivates the trunk muscles more than HC, thereby adopting a strategy that is stiffer and more fatiguing.

Alteration in HDEMG Spatial Parameters of Trunk Muscle Due to Handle Design during Pushing

Previous research identifies that pushing and pulling is responsible for approximately 9-18% of all low back injuries. Additionally, the handle design of a cart being pushed can dramatically alter a worker's capacity to push (≅9.5%). Surprisingly little research has examined muscle activation of the low back and its role in muscle function. Therefore, the purpose of this study was to examine the effects of handle design combination of pushing a platform truck cart on trunk muscle activity. Twenty participants (10 males and 10 females, mean age = 24.3 ± 4.3 years) pushed 475 lbs using six different handle combinations involving handle orientation (vertical/horizontal/semi-pronated) and handle height (hip/shoulder). Multichannel high-density EMG (HDsEMG) was recorded for left and right rectus abdominis, erector spinae, and external obliques. Pushing at hip height with a horizontal handle orientation design (HH) resulted in significantly less (p < 0.05) muscle activity compared to the majority of other handle designs, as well as a significantly higher entropy than the shoulder handle height involving either the semi-pronated (p = 0.023) or vertical handle orientation (p = 0.028). The current research suggests that the combination of a hip height and horizontal orientation handle design may require increased muscle demand of the trunk and alter the overall muscle heterogeneity and pattern of the muscle activity.