Superparamagnetic magnesium ferrite/silica core-shell nanospheres: A controllable SiO2 coating process for potential magnetic hyperthermia application

Magneto-Induced Hyperthermia and Temperature Detection in Single Iron Oxide Core-Silica/Tb3+/Eu3+(Acac) Shell Nano-Objects

Multifunctional nano-objects containing a magnetic heater and a temperature emissive sensor in the same nanoparticle have recently emerged as promising tools towards personalized nanomedicine permitting hyperthermia-assisted treatment under local temperature control. However, a fine control of nano-systems' morphology permitting the synthesis of a single magnetic core with controlled position of the sensor presents a main challenge. We report here the design of new iron oxide core-silica shell nano-objects containing luminescent Tb³⁺/Eu³⁺-(acetylacetonate) moieties covalently anchored to the silica surface, which act as a promising heater/thermometer system. They present a single magnetic core and a controlled thickness of the silica shell, permitting a uniform spatial distribution of the emissive nanothermometer relative to the heat source. These nanoparticles exhibit the Tb³⁺ and Eu³⁺ characteristic emissions and suitable magnetic properties that make them efficient as a nanoheater with a Ln³⁺-based emissive self-referencing temperature sensor covalently coupled to it. Heating capacity under an alternating current magnetic field was demonstrated by thermal imaging. This system offers a new strategy permitting a rapid heating of a solution under an applied magnetic field and a local self-referencing temperature sensing with excellent thermal sensitivity (1.64%·K^-1 (at 40 °C)) in the range 25-70 °C, good photostability, and reproducibility after several heating cycles.

Hydroxypicolinic acid tethered on magnetite core-silica shell (HPCA@SiO2@Fe3O4) as an effective and reusable adsorbent for practical Co(II) recovery

The soaring demand and future supply risk for cobalt (Co) necessitate more efficient adsorbents for its recycling from electronic wastes, as a cheaper and less hazardous option for its production. Herein, a magnetic adsorbent covalently tethered with 5-hydroxypicolinic acid (HPCA) as Co(II) ligand was developed. The magnetic component (Fe₃O₄) was protected with silica (SiO₂), then silanized with chloroalkyl linker and subsequently functionalized with HPCA via S_N2 nucleophilic substitution (HPCA@SiO₂@Fe₃O₄). Results from FTIR, TGA, EA, and XPS confirm the successful adsorbent preparation with high HPCA loading of 2.62 mmol g^-1. TEM-EDS reveal its imperfect spherical morphology with ligands well-distributed on its surface. HPCA@SiO₂@Fe₃O₄ is hydrophilic, water-dispersible and magnetically retrievable, which is highly convenient for its recovery. The Co(II) capture on HPCA@SiO₂@Fe₃O₄ involves monodentate coordination with carboxylate (COO^-) and lone pair acceptance from pyridine (aromatic -N = ) moiety of HPCA, with minor interaction from acidic silanols (Si-O^-). The binding occurs at 2 HPCA: 1 Co(II) ratio, that follows the Sips isotherm model with competitive Q_max = 92.35 mg g^-1 and pseudo-second order kinetics (k₂ = 0.0042 g mg^-1 min^-1). In a simulated LIB liquid waste, HPCA@SiO₂@Fe₃O₄ preferentially captures Co(II) over Li(I) with α_Li(I)^Co(II)=166 and Mn(II) with α_Mn(II)^Co(II)=55, which highlights the importance of HPCA for Co(II) recovery. Silica protection of Fe₃O₄ rendered the adsorbent chemically stable in acidic thiourea solution for its regeneration by preventing the deterioration of the magnetic component. Covalent functionalization averted ligand loss, which allowed HPCA@SiO₂@Fe₃O₄ to deliver consistent and reversible adsorption/desorption performance. Overall results demonstrate the potential of HPCA@SiO₂@Fe₃O₄ as a competitive and practical adsorbent for Co(II) recovery in liquid waste sources.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

The Effects of a Varied Gold Shell Thickness on Iron Oxide Nanoparticle Cores in Magnetic Manipulation, T1 and T2 MRI Contrasting, and Magnetic Hyperthermia

Fe₃O₄–Au core–shell magnetic-plasmonic nanoparticles are expected to combine both magnetic and light responsivity into a single nanosystem, facilitating combined optical and magnetic-based nanotheranostic (therapeutic and diagnostic) applications, for example, photothermal therapy in conjunction with magnetic resonance imaging (MRI) imaging. To date, the effects of a plasmonic gold shell on an iron oxide nanoparticle core in magnetic-based applications remains largely unexplored. For this study, we quantified the efficacy of magnetic iron oxide cores with various gold shell thicknesses in a number of popular magnetic-based nanotheranostic applications; these included magnetic sorting and targeting (quantifying magnetic manipulability and magnetophoresis), MRI contrasting (quantifying benchtop nuclear magnetic resonance (NMR)-based T₁ and T₂ relaxivity), and magnetic hyperthermia therapy (quantifying alternating magnetic-field heating). We observed a general decrease in magnetic response and efficacy with an increase of the gold shell thickness, and herein we discuss possible reasons for this reduction. The magnetophoresis speed of iron oxide nanoparticles coated with the thickest gold shell tested here (ca. 42 nm) was only ca. 1% of the non-coated bare magnetic nanoparticle, demonstrating reduced magnetic manipulability. The T₁ relaxivity, r₁, of the thick gold-shelled magnetic particle was ca. 22% of the purely magnetic counterpart, whereas the T₂ relaxivity, r₂, was 42%, indicating a reduced MRI contrasting. Lastly, the magnetic hyperthermia heating efficiency (intrinsic loss power parameter) was reduced to ca. 14% for the thickest gold shell. For all applications, the efficiency decayed exponentially with increased gold shell thickness; therefore, if the primary application of the nanostructure is magnetic-based, this work suggests that it is preferable to use a thinner gold shell or higher levels of stimuli to compensate for losses associated with the addition of the gold shell. Moreover, as thinner gold shells have better magnetic properties, have previously demonstrated superior optical properties, and are more economical than thick gold shells, it can be said that “less is more”.