A validated stability-indicating UPLC method for determination of diclofenac sodium in its pure form and matrix formulations

Polystyrene nanoplastics alter the ecotoxicological effects of diclofenac on freshwater microalgae Scenedesmus obliquus

Due to the escalating risk of plastic pollution, nanoplastics have attracted considerable attention in the recent past. They can co-exist and interact with other contaminants like pharmaceuticals in the aquatic environment. Therefore, it is pertinent to understand how these pollutants interact with one another in the ecosystem. The current study examined the individual and combined effects of fluorescent polystyrene nanoplastics (FNPs) and diclofenac (DCF) on Scenedesmus obliquus using a full factorial design. The toxicity of S. obliquus significantly increased in a dose-dependent manner upon exposure to pristine forms of DCF and FNPs. The major cause of individual toxicity of DCF and FNPs in S. obliquus was oxidative stress. In the combined toxicity tests when FNPs (0.01, 0.1, and 1 mg L-1) and DCF (1 mg L-1) were mixed, a synergistic effect was noted compared to the respective pristine FNPs. However, when the DCF concentration in the mixture was decreased to 0.25 mg L-1, the combined toxicity with FNPs (0.01, 0.1, and 1 mg L-1) reduced indicating an antagonistic effect. The independent action model also showed an antagonistic effect for low-dose combinations of DCF and a synergistic effect for high-dose combinations. The estimation of oxidative stress parameters, antioxidant enzyme activity, and photosynthetic pigment content in the algae further validated the cytotoxicity data. The mean hydrodynamic diameter and surface charge analyses further indicated that the colloidal stability of the FNPs in the medium was affected when they were combined with DCF. The key reason for differences in the cytotoxicity of combinations could be observed variations in the aggregation of FNPs and differential adsorption patterns of DCF on the FNPs. These factors efficiently altered cell-particle interactions in the mixture demonstrating a hormesis effect. Thus, this current study highlighted the hazardous nature of the nanoplastics and their co-exposure risks with pharmaceuticals on microalgae in freshwater environments.

Validation of an HPLC Method for the Determination of Diclofenac Diethylamine and Three of Its Impurities in a Gel Pharmaceutical Form

BACKGROUND

Monitoring impurities in drug products is a principal requirement of pharmaceutical regulatory authorities all over the world to ensure drug safety. For this reason, there is a great need for analytical QC of dugs products.

OBJECTIVE

In this study, a simple, efficient, and direct HPLC method was developed for the determination of three impurities of diclofenac.

METHODS

The HPLC method was developed using a mobile phase which consisted of an HPLC grade mixture, acetonitrile-0.01M phosphoric acid adjusted to pH 2.3 (1 + 3, by volume).

RESULTS

The separation was performed in 15 min. The calibration curves of the three impurities were linear; the correlation coefficients were 0.999 at concentrations of 0.00015-0.003 µg/mL.

CONCLUSION

The validation of this method shows that it meets all validation criteria. This shows the reliability of this method for the routine control of diclofenac impurities.

HIGHLIGHTS

The validation of a robust HPLC method for the determination of diclofenac impurities is of great importance for the pharmaceutical industry to control its products.

UPLC Technique in Pharmacy—An Important Tool of the Modern Analyst

In recent years, ultra-efficient liquid chromatography (UPLC) has gained particular popularity due to the possibility of faster separation of small molecules. This technique, used to separate the ingredients present in multi-component mixtures, has found application in many fields, such as chemistry, pharmacy, food, and biochemistry. It is an important tool in both research and production. UPLC created new possibilities for analytical separation without reducing the quality of the obtained results. This technique is therefore a milestone in liquid chromatography. Thanks to the increased resolution, new analytical procedures, in many cases, based on existing methods, are being developed, eliminating the need for re-analysis. Researchers are trying to modify and transfer the analytical conditions from the commonly used HPLC method to UPLC. This topic may be of strategic importance in the analysis of medicinal substances. The information contained in this manuscript indicates the importance of the UPLC technique in drug analysis. The information gathered highlights the importance of selecting the appropriate drug control tools. We focused on drugs commonly used in medicine that belong to various pharmacological groups. Rational prescribing based on clinical pharmacology is essential if the right drug is to be administered to the right patient at the right time. The presented data is to assist the analyst in the field of broadly understood quality control, which is very important, especially for human health and treatment. This manuscript shows that the UPLC technique is now an increasingly used tool for assessing the quality of drugs and determining the identity and content of active substances. It also allows the monitoring of active substances and finished products during their processing and storage.

TLC–Densitometry for Determination of Omeprazole in Simple and Combined Pharmaceutical Preparations

TLC combined with densitometry was used and chromatographic conditions developed to separate omeprazole and diclofenac sodium from their potential impurities. The development of the TLC–densitometry method is based on the elaboration of new chromatographic conditions allowing for the simultaneous determination of omeprazole and diclofenac sodium in a pharmaceutical preparation. Identification and quantification of omeprazole in simple and combined (with diclofenac) pharmaceutical preparations was performed on silica gel 60F₂₅₄ using one mobile phase: chloroform–methanol–ammonia (36:4:0.60, v/v). Diclofenac sodium was determined in the presence of omeprazole after 2D separation on silica gel using two mobile phases of the first phase of chloroform–methanol–ammonia (36:4:0.60, v/v) and the second mobile phase cyclohexane–chloroform–methanol–glacial acetic acid (6:3:0.5:0.5 v/v). The developed method is simple, economical, specific, precise, accurate, sensitive, and robust, with a good range of linearity for the quantification of omeprazole and diclofenac sodium. TLC in combination with densitometry can be used as an effective analytical tool for quality control and quantitative determination of omeprazole in simple and combined pharmaceutical preparations containing diclofenac sodium. TLC in combination with densitometry can be recommended for the analysis of omeprazole and diclofenac sodium in the absence of HPLC or spectrophotometer in the laboratory or to confirm results obtained with other analytical techniques.

Ultra-Performance Liquid Chromatographic and Densitometric Methods for Sensitive Determination of Xipamide and Triamterene in Pure and Pharmaceutical Dosage Forms

BACKGROUND

Validated UPLC method and TLC densitometric method were prescribed for determination of antihypertensive components. Objectives: To establish and validate rapid and accurate Ultra performance liquid chromatographic (UPLC) and TLC densitometric methods for determination of Xipamide and Triamterene in pure and dosage forms.

METHODS

The first method; UPLC method, depended on using Agilent Zorbax Eclipse Plus C8 (50 mm × 2.1 mm, 1.8 μm), as the column, mobile phase composed of (acetonitrile-water) (70 + 30, v/v) adjusted by acetic acid to obtain (pH 3), 0.2 mL/min flow rate and UV detection at 231.4 nm. The second method was a thin layer chromatography (TLC) densitometric method, separation was achieved by using toluene-methanol-ethyl chloride-acetic acid (7 + 2 + 1 + 0.2, v/v/v) as the mobile phase, pre coated silica gel plates as the stationary phase and UV detection at 300.0 nm.

RESULTS

The obtained results were validated and statistically compared with official and reported methods. The obtained results showed high accuracy and reproducible results with excellent mean recoveries for both drugs.

CONCLUSIONS

The UPLC method showed shorter retention time for both Xipamide (0.88 min) and Triamterene (0.63 min), lower detection limit less than 0.055 µg/mL for both drugs with high selectivity, decreased injection volume (1 µL) and lower flow rate other than any HPLC method. Both proposed methods were sensitive, selective, and effectively applied to pure and dosage forms (Epitens®).

HIGHLIGHTS

Unprecedented sensitive, rapid, and reproducible UPLC and TLC methods were developed for selective determination of mixture of Xipamide and Triamterene with LOD less than 0.076 µg/mL for both drugs.

Quantification and Classification of Diclofenac Sodium Content in Dispersed Commercially Available Tablets by Attenuated Total Reflection Infrared Spectroscopy and Multivariate Data Analysis

A new methodology, based on Fourier transform infrared spectroscopy equipped with an attenuated total reflectance accessory (ATR FT-IR), was developed for the determination of diclofenac sodium (DS) in dispersed commercially available tablets using chemometric tools such as partial least squares (PLS) coupled with discriminant analysis (PLS-DA). The results of PLS-DA depicted a perfect classification of the tablets into three different groups based on their DS concentrations, while the developed model with PLS had a sufficiently low root mean square error (RMSE) for the prediction of the samples’ concentration (~5%) and therefore can be practically used for any tablet with an unknown concentration of DS. Comparison with ultraviolet/visible (UV/Vis) spectrophotometry as the reference method revealed no significant difference between the two methods. The proposed methodology exhibited satisfactory results in terms of both accuracy and precision while being rapid, simple and of low cost.

Rapid Raman Spectroscopic Analysis of Stress Induced Degradation of the Pharmaceutical Drug Tetracycline

Stress factors caused by inadequate storage can induce the unwanted degradation of active compounds in pharmaceutical formulations. Resonance Raman spectroscopy is presented as an analytical tool for rapid monitoring of small concentration changes of tetracycline and the metabolite 4˗epianhydrotetracycline. These degradation processes were experimentally induced by changes in temperature, humidity, and irradiation with visible light over a time period of up to 23 days. The excitation wavelength λ_exc = 413 nm was proven to provide short acquisition times for the simultaneous Raman spectroscopic detection of the degradation of tetracycline and production of its impurity in small sample volumes. Small concentration changes could be detected (down to 1.4% for tetracycline and 0.3% for 4-epianhydrotetracycline), which shows the potential of resonance Raman spectroscopy for analyzing the decomposition of pharmaceutical products.

Application of Thin-Layer Chromatography in Combination with Densitometry for the Determination of Diclofenac in Enteric Coated Tablets

Diclofenac belongs to the drug class non-steroidal anti-inflammatory drugs widely used in Europe as well as all over the world. Thus, it is important to conduct research on its quality control of available pharmaceutical preparations like for example enteric coated tablets. Among various analytical techniques, thin-layer chromatography (TLC) is ideal for this task due to their short time analysis, ease of operation and low cost. Hence, the aim of this study was to develop the optimal conditions of analysis and quantitative determination of diclofenac sodium in enteric tablets by using TLC in combination with densitometry. Of all chromatographic systems tested, the best is the one which consists of silica gel 60F₂₅₄ and cyclohexane: chloroform:methanol:glacial acetic acid (6:3:0.5:0.5 v/v) as the mobile phase, which allows the successful separation of examined diclofenac sodium as active component and the largest number (twelve) of its degradation products as potential impurities of its pharmaceutical products. This indicates that the newly developed method is more effective than previously reported assays by Starek and Krzek. Linearity range was found to be 4.00–18.00 μg/spot for diclofenac sodium. The results of the assay of enteric tablet formulations equals 98.8% of diclofenac sodium in relation to label claim is in a good agreement with pharmaceutical requirements.

Recent Advances on Drug Analyses Using Ultra Performance Liquid Chromatographic Techniques and their Application to the Biological Samples

Introduction:

Ultra-Performance Liquid Chromatographic (UPLC) method enables analyst to establish an analysis at higher pressure than High Performance Liquid Chromatographic (HPLC) method towards liquid chromatographic methods. UPLC method provides the opportunity to study a higher pressure compared to HPLC, and therefore smaller column in terms of particle size and internal diameter are generally used in drug analysis. The UPLC method has attracted gradually due to its advantages such as short analysis time, the small amount of waste reagents and the significant savings in the cost of their destruction process. In this review, the recent selected studies related to the UPLC method and its method validation are summarized. The drug analyses and the results of the studies which were investigated by UPLC method, with certain parameters from literature are presented.

Background:

Quantitative determination of drug active substances by High-Performance Liquid Chromatography (HPLC) from Liquid Chromatography (LC) methods has been carried out since the 1970's with the use of standard analytical LC methods. In today's conditions, rapid and very fast even ultra-fast, flow rates are achieved compared to conventional HPLC due to shortening analysis times, increasing method efficiency and resolution, reducing sample volume (and hence injection volume), reducing waste mobile phase. Using smaller particles, the speed and peak capacity are expanding to new limit and this technology is named as Ultra Performance Liquid Chromatography. In recent years, as a general trend in liquid chromatography, ultra-performance liquid chromatography has taken the place of HPLC methods. The time of analysis was for several minutes, now with a total analysis time of around 1-2 minutes. The benefits of transferring HPLC to UPLC are much better understood when considering the thousands of analyzes performed for each active substance, in order to reduce the cost of analytical laboratories where relevant analysis of drug active substances are performed without lowering the cost of research and development activities.

Methods:

The German Chemist Friedrich Ferdinand Runge, proposed the use of reactive impregnated filter paper for the identification of dyestuffs in 1855 and at that time the first chromatographic method in which a liquid mobile phase was used, was reviewed. Christian Friedrich Chönbein, who reported that the substances were dragged at different speeds in the filter paper due to capillary effect, was followed by the Russian botanist Mikhail S. Tswet, who planted studies on color pigment in 1906. Tswet observes the color separations of many plant pigments, such as chlorophyll and xanthophyll when he passes the plant pigment extract isolated from plant through the powder CaCO3 that he filled in the glass column. This method based on color separation gives the name of "chromatographie" chromatography by using the words "chroma" meaning "Latin" and "graphein" meaning writing.

Results and Conclusion:

Because the UPLC method can be run smoothly at higher pressures than the HPLC method, it offers the possibility of analyzing using much smaller column sizes and column diameters. Moreover, UPLC method has advantages, such as short analysis time, the small amount of waste reagents and the significant savings in the cost of their destruction process. The use of the UPLC method especially analyses in biological samples such as human plasma, brain sample, rat plasma, etc. increasingly time-consuming due to the fact that the analysis time is very short compared to the HPLC, because of the small amount of waste analytes and the considerable savings in their cost.

Simultaneous extraction and determination of trace amounts of diclofenac from whole blood using supported liquid membrane microextraction and fast Fourier transform voltammetry

A novel, simple, and inexpensive analytical technique based on flat sheet supported liquid membrane microextraction coupled with fast Fourier transform stripping cyclic voltammetry on a reduced graphene oxide carbon paste electrode was used for the extraction and online determination of diclofenac in whole blood. First, diclofenac was extracted from blood samples using a polytetrafluoroethylene membrane impregnated with 1-octanol and then into an acceptor solution, subsequently it was oxidized on a carbon paste electrode modified with reduced graphene oxide nanosheets. The optimal values of the key parameters influencing the method were as follows: scan rate, 6 V/s; stripping potential, 200 mV; stripping time, 5 s; pH of the sample solution, 5; pH of the acceptor solution,7; and extraction time, 240 min. The calibration curves were plotted for the whole blood samples and the method was found to have a good linearity within the range of 1-25 μg/mL with a determination coefficient of 0.99. The limits of detection and quantification were 0.1 and 1.0 μg/mL, respectively. Using this coupled method, the extraction and determination were merged into one step. Accordingly, the speed of detection for sensitive determination of diclofenac in complex samples, such as blood, increased considerably.

Natural remedies for non-steroidal anti-inflammatory drug-induced toxicity

The liver is an important organ of the body, which has a vital role in metabolic functions. The non-steroidal anti-inflammatory drug (NSAID), diclofenac causes hepato-renal toxicity and gastric ulcers. NSAIDs are noted to be an agent for the toxicity of body organs. This review has elaborated various scientific perspectives of the toxicity caused by diclofenac and its mechanistic action in affecting the vital organ. This review suggests natural products are better remedies than current clinical drugs against the toxicity caused by NSAIDs. Natural products are known for their minimal side effects, low cost and availability. On the other hand, synthetic drugs pose the danger of adverse effects if used frequently or over a long period. Copyright © 2016 John Wiley & Sons, Ltd.

Multiple response optimization of processing and formulation parameters of Eudragit RL/RS-based matrix tablets for sustained delivery of diclofenac

CONTEXT

Multiple response optimization is an efficient technique to develop sustained release formulation while decreasing the number of experiments based on trial and error approach.

OBJECTIVE

Diclofenac matrix tablets were optimized to achieve a release profile conforming to USP monograph, matching Voltaren^®SR and withstand formulation variables. The percent of drug released at predetermined multiple time points were the response variables in the design. Statistical models were obtained with relative contour diagrams being overlaid to predict process and formulation parameters expected to produce the target release profile.

MATERIALS AND METHODS

Tablets were prepared by wet granulation using mixture of equivalent quantities of Eudragit RL/RS at overall polymer concentration of 10-30%w/w and compressed at 5-15KN.

RESULTS AND DISCUSSION

Drug release from the optimized formulation E4 (15%w/w, 15KN) was similar to Voltaren, conformed to USP monograph and found to be stable. Substituting lactose with mannitol, reversing the ratio between lactose and microcrystalline cellulose or increasing drug load showed no significant difference in drug release. Using dextromethorphan hydrobromide as a model soluble drug showed burst release due to higher solubility and formation of micro cavities.

CONCLUSION

A numerical optimization technique was employed to develop a stable consistent promising formulation for sustained delivery of diclofenac.