Synthesis and adsorption properties of chitosan-CDTA-GO nanocomposite for removal of hexavalent chromium from aqueous solutions

Interpretation of adsorption isotherm and kinetics behind fluorene degradation

The gradual release of slow-degrading polycyclic aromatic hydrocarbons into the environment creates a high level of threat to aquatic and terrestrial life worldwide. Remediation of these PAHs should be designed in such a way that it poses as few or no environmental hazards as possible. In our study, we examined the degradation ability of the synthesized MnO2 nanoparticles against fluorene. The MnO2 nanoparticle prepared was found to be spherical from the SEM analysis. XRD analysis confirms the average crystallite size as 31.8652 nm. Further, the characterization of nanoparticles was confirmed by UV-DRS, FT-IR, DLS, and HPLC techniques. The extent of adsorption potential of the synthesized nanoparticles was established from the batch adsorption studies and the kinetic and isotherm model was interpreted. The antimicrobial properties of the synthesized MnO2 nanoparticles were analyzed.

Effect of Modified Biochar Prepared by Co-pyrolysis of MgO on Phosphate Adsorption Performance and Seed Germination

Biochar is currently used as a phosphate adsorbent in water and subsequently as a soil amendment. In this study, modified biochar was prepared directly by co-pyrolysis of MgO and rice straw, and a preliminary ecotoxicological assessment was performed before the application of modified biochar to soil. The effects of single factors, such as pyrolysis temperature, dosage, pH, and coexisting ions, on phosphate adsorption performance were investigated. In addition, after phosphate adsorption, the effects of modified biochar leachate on the germination of corn and rice seeds were examined. The results showed that phosphate adsorption by the modified biochar first increased and then decreased as the pyrolysis temperature increased, with modified biochar prepared at 800 °C showing the greatest adsorption. In addition, a comprehensive cost analysis showed that the best phosphate adsorption effect of modified biochar was achieved at a dosage of 0.10 g and a solution pH of 3. In contrast, the presence of competitive coexisting ions, Cl- , NO3 - , CO3 2- , and SO4 2- , reduced the phosphate adsorption capacity of the modified biochar. The adsorption kinetics results revealed that the process of phosphate adsorption by the modified biochar was more in line with the pseudo-second-order model and dominated by chemisorption. Moreover, the adsorption isotherm results indicated that the process was more in line with the Langmuir model and dominated by monomolecular layer adsorption, with a maximum adsorption of 217.54 mg/g. Subsequent seed germination tests showed that phosphate-adsorbed modified biochar leachate had no significant effect on the germination rate of corn seeds, whereas it improved the germination rate of rice seeds. Together, these results provide guidance for the application of modified biochar firstly as an adsorbent of phosphate and subsequently as a soil remediator.

Spatial distribution and pollution assessment of heavy metals in surface and bottom water along the eastern part of the Egyptian Mediterranean coast

Seawater contamination with heavy metals (HMs) as a result of anthropogenic activities is a global challenge due to its negative impacts on marine environments and coastal communities. This study investigates the distribution of HMs (Fe, Zn, Cu, Mn, Cd, Ni and Co) and assesses the quality of surface and bottom seawater. Samples were collected in winter 2020 and summer 2021 from eleven sectors along the eastern Egyptian Mediterranean Sea coast. The water quality was evaluated using Water Quality Index (WQI), Metal Index (MI), heavy metal pollution index (HMI) and Metal Pollution index (MPI). The results indicated that, Eastern Harbour, Abu-Qir and Port Said sectors were polluted with HMs. Based on Two-Way ANOVA test there was seasonal variation for dissolved HMs (Zn, Ni, Cd and Mn in bottom layer and Cu in surface layer), while, (Cd, Co, Cu, Zn and Mn (in bottom layer)) revealed spatial differences among sectors.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

A review of novel green adsorbents as a sustainable alternative for the remediation of chromium (VI) from water environments

The presence of heavy metal, chromium (VI), in water environments leads to various diseases in humans, such as cancer, lung tumors, and allergies. This review comparatively examines the use of several adsorbents, such as biosorbents, activated carbon, nanocomposites, and polyaniline (PANI), in terms of the operational parameters (initial chromium (VI) concentration (C_o), temperature (T), pH, contact time (t), and adsorbent dosage) to achieve the Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption. The study finds that the use of biosorbents (fruit bio-composite, fungus, leave, and oak bark char), activated carbons (HCl-treated dry fruit waste, polyethyleneimine (PEI) and potassium hydroxide (KOH) PEI-KOH alkali-treated rice waste-derived biochar, and KOH/hydrochloric acid (HCl) acid/base-treated commercial), iron-based nanocomposites, magnetic manganese-multiwalled carbon nanotubes nanocomposites, copper-based nanocomposites, graphene oxide functionalized amino acid, and PANI functionalized transition metal are effective in achieving high Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption, and that operational parameters such as initial concentration, temperature, pH, contact time, and adsorbent dosage significantly affect the Langmuir's maximum adsorption capacity (q_m). Magnetic graphene oxide functionalized amino acid showed the highest experimental and pseudo-second-order kinetic model equilibrium adsorption capacities. The iron oxide functionalized calcium carbonate (IO@CaCO₃) nanocomposites showed the highest heterogeneous adsorption capacity. Additionally, Syzygium cumini bark biosorbent is highly effective in treating tannery industrial wastewater with high levels of chromium (VI).

A review on current progress of graphene-based ternary nanocomposites in the removal of anionic and cationic inorganic pollutants

The current review aims to summarize the ongoing advances in high-performing graphene-based ternary nanocomposites for removing cationic and anionic inorganic pollutants. Graphene derivatives are extensively utilized for the development of composites due to their high synergism with co-functional materials, rational design, flexible surface chemistry, high mobile charge carriers, improved binding properties, and many more. The past ten years have witnessed progressive research on graphene-based ternary nanocomposites in a multitude of pollution remediation applications. Therefore, the focus falls on understanding how these ternary nanocomposites are tailored to capture the inorganic cationic and anionic contaminants with particular emphasis on graphene derivatives as base matrix and filler. The review investigates the synthesis, categorization, and characterization techniques of graphene-based ternary composites. Besides, the study broadens the understanding of the binding mechanism of the pollutants onto graphene ternary composites. The review also assesses the separation and recycling efficacy of the composites in detail. The future prospects in improving the practical application of the ternary systems also have been discussed. The comprehensive review on graphene based ternary systems detailing their structural and functional aspects, as well as their performance as inorganic decontaminants can provide deep insights for researchers in improvising wastewater treatment technologies.

Carbon-based adsorbents as proficient tools for the removal of heavy metals from aqueous solution: A state of art-review emphasizing recent progress and prospects

Carbon-centric adsorbents (CCA) are diverse forms, from simple biochar (BC) to graphene derivatives, carbon nanotubes (CNTs), and activated carbon (AC), which have been vastly explored for their removal of a plethora of pollutants, including heavy metals (HM). The prominent features of CCA are their operational attributes like extensive surface area, the occurrence of flexible surface functional groups, etc. This work offers a comprehensive examination of contemporary research on CCA for their superior metal removal aptitude and performances in simulated solutions and wastewater flows; via portraying the recent research advances as an outlook on the appliances of CACs for heavy metal adsorption for removal via distinct forms like AC, BC, Graphene oxide (GO), and CNTs. The bibliometric analysis tool was employed to highlight the number of documents, country-wise contribution, and co-occurrence mapping based on the Scopus database. The coverage of research works in this review is limited to the last 5 years (2017-2021) to highlight recent progress and prospects in using CCAs such as AC, BC, GO, and CNTs to remove HM from aqueous media, which makes the review unique. Besides an overview of the common mechanisms of CACs, the future scope of CAC, especially towards HM mitigation, is also discussed in this review. This review endorses that further efforts should be commenced to enhance the repertory of CCAs that effectively eliminate multiple targeted metals in both simulated and real wastewater.

Chromium toxicity and its remediation by using endophytic bacteria and nanomaterials: A review

Chromium (Cr) is a crucial element for all life forms. Various anthropogenic activities have been responsible for environmental contamination with Cr (VI) in recent years. For this review, articles were collected using electronic databases such as Web of Science, Pubmed, ProQuest, and Google Scholar as per the guidelines of PRISMA-2015, applying the Boolean search methods. Chromium can cause severe health complications in humans and animals and threatens the surrounding environment, with negative impacts on crop yield, development, and quality. Hence, monitoring Cr contamination is essential, and various remediation technologies have emerged in the past 50 years to reduce the amount of Cr in the environment. This review focuses on chromium exposure and the associated environmental health risks. We also reviewed sustainable remediation processes, with emphasis on nanoparticle and endophytic remediation processes.

Synthesis of Functionalized Carboxylated Graphene Oxide for the Remediation of Pb and Cr Contaminated Water

With the growing scarcity of water, the remediation of water polluted with heavy metals is the need of hour. The present research work is aimed to address this problem by adsorbing heavy metals ions (Pb (II) and Cr (VI)) on modified graphene oxide having an excess of carboxylic acid groups. For this, graphene oxide (GO) was modified with chloroacetic acid to produce carboxylated graphene oxide (GO-COOH). The successful synthesis of graphene oxide and its modification has been confirmed using Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX) and Transmission electron microscopy (TEM). The increase in surface area of graphene oxide after treatment with chloroacetic acid characterized by BET indicated its successful modification. A batch experiment was conducted to optimize the different factors affecting adsorption of both heavy metals on GO-COOH. After functionalization, we achieved maximum adsorption capacities of 588.23 mg g^-1 and 370.37 mg g^-1 for Pb and Cr, respectively, by GO-COOH which were high compared to the previously reported adsorbents of this kind. The Langmuir model (R² = 0.998) and Pseudo-second-order kinetic model (R² = 0.999) confirmed the monolayer adsorption of Pb and Cr on GO-COOH and the chemisorption as the dominant process governing adsorption mechanism. The present work shows that the carboxylation of GO can enhance its adsorption capacity efficiently and may be applicable for the treatment of wastewater.

Synthesis of hybrid biosorbent based on 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and organo-functionalized calcium alginate for adsorptive removal of Cu(II)

The present study is based on the synthesis of a novel hybrid biosorbent using 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and amino-thiocarbamate moiety functionalized sodium alginate (CDTA-CS/TSC-CA). The fabricated sorbent was employed to investigate the efficient recovery of Cu(II) from aqueous media. CDTA-CS/TSC-CA was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Analysis confirmed the successful modification of both biopolymers and subsequent loading of Cu(II) ions. CDTA-CS/TSC-CA was casted in the form of hydrogel beads having different CDTA-CS to TSC-CA mass ratios i.e., 10.0-40.0% by mass. The hydrogel beads 4CDTA-CS/TSC-CA with CDTA-CS/TSC-CA mass ratio of 40.0% was found most effective for copper sorption. Equilibrium sorption results showed that initial concentration of copper, medium pH, contact time, sorbent dosage and temperature influenced the sorption capacity (q_e). Rate of sorption data was interpreted using different kinetic models and found best fitted with pseudo second order rate expression (R² ≈ 0.99), illustrating that the rate determining step includes the electron density transfer from sorbent coordination sites to central copper ions. Crank's RIDE equation and Elovich chemisorption model (ECM) revealed the presence of two sorption phases, initially rapid sorption followed by comparatively a slow uptake. Equilibrium sorption data was well depicted by Langmuir model and maximum monolayer adsorption capacity (q_m) was computed as 276.53 mg·g^-1 at 298 K. Standard Gibbs free energy change, ∆G° (-19.99, -20.18 and -20.36 kJ/ mol), standard enthalpy change, ∆H° (-8.95 kJmol) and standard entropy change, ∆S° (0.04 kJ/mol K^-1) values suggested that the adsorption process is spontaneous and exothermic. Hence, 4CDTA-CS/TSC-CA was found efficient biosorbent for copper removal from its dilute effluents.

Synthesis of 3D graphene-based materials and their applications for removing dyes and heavy metals

Contamination of water streams by dyes and heavy metals has become a major problem due to their persistence, accumulation, and toxicity. Therefore, it is essential to eliminate and/or reduce these contaminants before discharge into the natural environment. In recent years, 3D graphene has drawn intense research interests owing to its large surface area, superior charge conductivity, and thermal conductivity properties. Due to their unique surface and structural properties, 3D graphene-based materials (3D GBMs) are regarded as ideal adsorbents for decontamination and show great potential in wastewater or exhaust gas treatment. Here, this minireview summarizes the recent progress on 3D GBMs synthesis and their applications for adsorbing dyes and heavy metals from wastewater based on the structures and properties of 3D GBMs, which provides valuable insights into 3D GBMs' application in the environmental field.

A review on cleaner strategies for extraction of chitosan and its application in toxic pollutant removal

Existence of human beings in this world require a cleaner environment, in which, water is the main requirement for living. Owing to the considerable development in civilisation and considerable population explosion, an increase in the contamination of natural water resources by means of non-biodegradable contaminants like heavy metals is observed thereby increasing the need for treatment of water before usage. Despite the existence of specific limits for disposal of heavy metals in water resources, studies still show high contamination of heavy metals in all these water resources. This review provides a brief note on sources and toxicity of different heavy metals in various oxidation states, their effects as well as highlights the numerous available and advanced techniques for heavy metals removal. Of all techniques adsorption is found to be beneficial as it doesn't inculcate any secondary pollutants to the environment. Additionally, this article has investigated the advantages of polymer nanocomposites in adsorption and mainly focused on biopolymer chitosan owing to its abundance in natural environment. The cleaner techniques for the extraction of chitosan and its functionalisation using different types of nanofillers are comprehensively discussed in this review. This article suggests a better alternative for conventional adsorbents as well as aids in remediation of wastes.

Chromium contamination and effect on environmental health and its remediation: A sustainable approaches

Chromium (Cr) is a trace element critical to human health and well-being. In the last few decades, its contamination, especially hexavalent chromium [Cr(VI)] form in both terrestrial and aquatic ecosystems, has amplified as a result of various anthropogenic activities. Chromium pollution is a significant environmental threat, severely impacting our environment and natural resources, especially water and soil. Excessive exposure could lead to higher levels of accumulation in human and animal tissues, leading to toxic and detrimental health effects. Several studies have shown that chromium is a toxic element that negatively affects plant metabolic activities, hampering crop growth and yield and reducing vegetable and grain quality. Thus, it must be monitored in water, soil, and crop production system. Various useful and practical remediation technologies have been emerging in regulating chromium in water, soil, and other resources. A sustainable remediation approach must be adopted to balance the environment and nature.

Batch adsorption studies on surface tailored chitosan/orange peel hydrogel composite for the removal of Cr(VI) and Cu(II) ions from synthetic wastewater

Elimination of heavy metals from wastewater has been a significant process to improve the aquatic source's quality. Various materials act as very effective adsorbents to remove heavy metals, which cause toxicity to plants and all other living organisms. Thus, the present work focuses on removing heavy metals chromium (Cr) and copper (Cu) ions containing wastewater using biodegradable and cost-effective chitosan-based hydrogel composite. The composite was prepared via chemical cross-linking of radical chitosan with polyacrylamide and N,N'-Methylene bisacrylamide and blended with orange peel. The synthesis of the adsorbent has been confirmed by using Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy - Energy dispersive X-ray analysis (SEM-EDAX) and X-ray diffraction (XRD) studies. The adsorption power of the composite of metal ions at different time, pH, adsorbent dosages, different metal ion concentrations were analyzed by using Atomic Absorption Spectroscopy (AAS). The results concluded that the optimum pH for Cr(VI) and Cu (II) were 4 and 5, contact time: 360 min, adsorbent dosage: 4 g, and initial metal ion concentration: 100 mg/L for each metal ions. The adsorption isotherm models follow the Freundlich model and pseudo-second-order kinetics. From the results, the adsorption capacity was observed to be 80.43% for Cr(VI) and 82.47% for Cu(II) ions, respectively.

Adsorptive removal of heavy metal ions using graphene-based nanomaterials: Toxicity, roles of functional groups and mechanisms

The endless introduction of toxic heavy metals through industrialization has worsened the heavy metal pollution in the environment. Thus, the need for its effective removal has become more crucial than before. Studies on graphene-based nanomaterials and their use in removing heavy metals are gaining tremendous traction over the past decade. The properties of graphene oxide (GO), such as large surface areas, desired functional groups and excellent mechanical properties are advantageous. Nevertheless, due to its tendency to agglomerate and difficulty in phase separation after treatment, the functionalization of GO using various materials of different surface functional groups is an ongoing study. The surface modification of GO is done by using various materials to introduce heteroatoms, which have high affinity for heavy metals. This review summarizes the utilization of different surface functional groups, such as oxygen-containing, nitrogen-containing, and sulphur-containing functionalized graphene oxide composites in the adsorption of cationic and oxyanionic heavy metals. The toxicity of these heavy metals is also addressed. Furthermore, the interactions between adsorbents and heavy metals which are influenced by pH and surface functional groups, are also discussed in detail. This is followed by the review in adsorption isotherms and kinetics. Future research needs are also offered.

Characterization and deployment of surface-engineered chitosan-triethylenetetramine nanocomposite hybrid nano-adsorbent for divalent cations decontamination

The latency of toxic cations in the ecosystem poses serious ecological problems due to its bioaccumulation potential and toxicity to living organisms. The effective removal of these wastewater cations releasing from multi-industries is a bottleneck issue. Therefore, an attempt has been made to design a suitable sorbent for cations sorption from the aqueous environment. The chitosan biopolymer was modified with triethylenetetramine to incorporate active sites in the polymeric sequence to boost up its cations sorption capacity. Triethylenetetramine molecule anchoring chitosan (CH-TET) was authenticated through elemental assay, Fourier-transform infrared spectroscopy and ¹³C NMR in solid-state, scanning electron microscopy and thermal analysis. The sorption of lead (1.94 mmol g^-1), copper (2.79 mmol g^-1) and nickel (1.53 mmol g^-1) was carried out using the functionalized chitosan from aqueous solution, which showed higher sorption capacity for lead and copper than the pristine chitosan in terms of Langmuir sorption isotherm. To scrutinize the mechanism of sorption and energy of interaction between sorbent and sorbate, Langmuir, Temkin, and Freundlich isotherm models were used for sorption study. The Langmuir model showed the best fitting to the results based on lower error function values and a higher correlation coefficient (R²). It can be concluded that the triethylenetetramine-modified chitosan might be considered as an effective sorbent for cations removal from industrial wastewater.

Recent Advances in Applications of Hybrid Graphene Materials for Metals Removal from Wastewater

The presence of traces of heavy metals in wastewater causes adverse health effects on humans and the ecosystem. Adsorption is a low cost and eco-friendly method for the removal of low concentrations of heavy metals from wastewater streams. Over the past several years, graphene-based materials have been researched as exceptional adsorbents. In this review, the applications of graphene oxide (GO), reduce graphene oxide (rGO), and graphene-based nanocomposites (GNCs) for the removal of various metals are analyzed. Firstly, the common synthesis routes for GO, rGO, and GNCs are discussed. Secondly, the available literature on the adsorption of heavy metals including arsenic, lead, cadmium, nickel, mercury, chromium and copper using graphene-based materials are reviewed and analyzed. The adsorption isotherms, kinetics, capacity, and removal efficiency for each metal on different graphene materials, as well as the effects of the synthesis method and the adsorption process conditions on the recyclability of the graphene materials, are discussed. Finally, future perspectives and trends in the field are also highlighted.

Contribution of Cross-Linker and Silica Morphology on Cr(VI) Sorption Performances of Organic Anion Exchangers Embedded into Silica Pores

Removal of Cr(VI) from the environment represents a stringent issue because of its tremendous effects on living organisms. In this context, design of sorbents with high sorption capacity for Cr(VI) is getting a strong need. For this purpose, poly(vinylbenzyl chloride), impregnated into porous silica (PSi), was cross-linked with either N,N,N',N'-tetramethyl-1,2-ethylenediamine (TEMED) or N,N,N',N'-tetramethyl-1,3-propanediamine, followed by the reaction of the free -CH2Cl groups with N,N-diethyl-2-hydroxyethylamine to generate strong base anion exchangers (ANEX) inside the pores. The PSi/ANEX composite sorbents were deeply characterized by FTIR spectroscopy, SEM-energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), and water uptake. The sorption performances of composites against Cr(VI) were investigated as a function of pH, contact time, initial concentration of Cr(VI), and temperature. It was found that the cross-linker structure and the silica morphology are the key factors controlling the sorption capacity. The adsorption process was spontaneous and endothermic and well described by pseudo-second-order kinetic and Sips isotherm models. The maximum sorption capacity of 311.2 mg Cr(VI)/g sorbent was found for the composite prepared with mesoporous silica using TEMED as cross-linker. The PSi/ANEX composite sorbents represent an excellent alternative for the removal of Cr(VI) oxyanions, being endowed with fast kinetics, equilibrium in about 60 min, and a high level of reusability in successive sorption/desorption cycles.

A Comparative Study of Raw and Metal Oxide Impregnated Carbon Nanotubes for the Adsorption of Hexavalent Chromium from Aqueous Solution

The present study reports the use of raw, iron oxide, and aluminum oxide impregnated carbon nanotubes (CNTs) for the adsorption of hexavalent chromium (Cr(VI)) ions from aqueous solution. The raw CNTs were impregnated with 1% and 10% loadings (weight %) of iron oxide and aluminum oxide nanoparticles using wet impregnation technique. The synthesized materials were characterized using scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Batch adsorption experiments were performed to assess the removal efficiency of Cr(VI) ions from water and the effects of pH, contact time, adsorbent dosage, and initial concentration of the Cr(VI) ions were investigated. Results of the study revealed that impregnated CNTs achieved significant increase in the removal efficiency of Cr(VI) ions compared to raw CNTs. In fact, both CNTs impregnated with 10% loading of iron and aluminum oxides were able to remove up to 100% of Cr(VI) ions from aqueous solution. Isotherm studies were carried out using Langmuir and Freundlich isotherm models. Adsorption kinetics of Cr(VI) ions from water was found to be well described by the pseudo-second-order model. The results suggest that metallic oxide impregnated CNTs have very good potential application in the removal of Cr(VI) ions from water resulting in better environmental protection.