Biomechanical comparison between the rectangular-tunnel and the round-tunnel anterior cruciate ligament reconstruction procedures with a bone-patellar tendon-bone graft

Bone-Patellar Tendon-Bone Versus Quadriceps Tendon-Bone Autografts in Anatomic Rectangular Tunnel Anterior Cruciate Ligament Reconstruction

Background

Anatomic rectangular tunnel anterior cruciate ligament reconstruction (ART-ACLR) can mimic the fiber arrangement of the native ACL and restore normal knee biomechanics, compared with the conventional round tunnel ACLR. ART-ACLR using a bone-patellar tendon-bone (BPTB) graft can provide satisfactory clinical outcomes; however, some issues such as secondary ACL injury and donor-site morbidity, including postoperative anterior knee pain (AKP), remain to be solved. Due to these issues, quadriceps tendon-bone (QTB) grafts have recently become more popular.

Purpose

To compare the 2-year clinical outcomes of ART-ACLR with BPTB and QTB autografts.

Study Design

Cohort study; Level of evidence, 3.

Methods

A total of 134 patients underwent primary ART-ACLR with BPTB (n = 70) or QTB (n = 64). All patients had a minimum follow-up period of 2 years postoperatively. Outcome evaluations included the International Knee Documentation Committee (IKDC), Knee injury and Osteoarthritis Outcome Score (KOOS), side-to-side differences (SSDs) with the KT-1000 knee arthrometer, rate of secondary ACL injury, and incidence of AKP.

Results

Regarding age, sex, height, weight,and concomitant procedures, there were no significant differences between the 2 groups. All clinical scores significantly improved from preoperatively to 6 months postoperatively and further increased throughout the 2-year postoperative period in both groups. The IKDC and all subscales of the KOOS, except Sport and Recreation, were equivalent between the BPTB and QTB groups at each postoperative time point. There were no significant differences in the SSD value of KT-1000 arthrometer between the 2 groups. The rates of secondary ACL injury were 10.0% on the ipsilateral side and 2.9% on the contralateral side in the BPTB group and 3.1% on the ipsilateral side and 4.7% on the contralateral side in the QTB group, with no significant difference between both groups. The incidence of AKP was 17.1% and 4.9% in the BPTB group and QTB group, respectively, with significance of P = .02).

Conclusion

The clinical scores, SSD value of the KT-1000 arthrometer, and secondary ACL injury rates were equivalent between the BPTB and QTB groups. However, the incidence of AKP was significantly lower in the QTB group, suggesting that QTB could be a favorable graft for ACLR.

Mechanical Evaluation of Bone-Patellar Tendon-Bone Graft Fixation to the Tibia in ACL Reconstruction: Bone Plug Tensioning and Fixation System versus Interference Screw

This study aimed to evaluate the mechanical properties of bone plug fixation to the tibia with a novel device, the Bone plug Tensioning and Fixation (BTF) system.Forty bone-tendon-bone grafts consisting of the whole patella-patellar tendon-tibial bone plug of 10-mm width and tibiae from the porcine were prepared. After creating a 10-mm tibial tunnel, the tibial bone plug was fixed to the tibia with the BTF system or the interference screw (IFS) to prepare a test specimen of the patella-patellar tendon-tibial bone plug fixed to the tibia. For the graft tension controllability study, a predetermined initial tension of 9.8 or 19.6 N was applied and maintained for 5 minutes. Then the bone plug was fixed to the tibia with the BTF system or IFS in 10 specimens, monitoring the residual tension for an additional 5 minutes. Then, a cyclic loading test and a tension-to-failure test were performed.The mean difference between the residual tension and the predetermined tension was significantly smaller in BTF fixation (9.8 N → 10.6 ± 2.2 N; 19.6 N → 18.9 ± 2.1 N) than in IFS fixation (9.8 N → 23.4 ± 7.4 N; 19.6 N → 28.9 ± 11.5 N). The mean displacement of the bone plug after cyclic loading was significantly less in the BTF group (1.2 ± 0.6 mm) than in the IFS group (2.2 ± 1.0 mm; p < 0.01). Stiffness was significantly greater in the BTF group (504.6 ± 148.8 N/mm) than in the IFS group (294.7 ± 96.7 N/mm; p < 0.01), whereas the maximum failure loads in the two groups did not differ significantly (724.2 ± 180.3 N in the BTF and 634.8 ± 159.4 N in the IFS groups).BTF system better performed in graft tension controllability than IFS did. BTF fixation was superior to IFS fixation in the displacement of the bone plug during the cyclic loading test and in stiffness in the tension-to-failure test.

Rectangular-Tunnel Anterior Cruciate Ligament Reconstruction Using Quadriceps Tendon-Patellar Bone Autograft Can Reduce Early Donor Site Morbidity While Maintaining Comparable Short-term Clinical Outcomes

Background

Rectangular tunnel and graft have been recently designed to closely resemble the native anatomy in anterior cruciate ligament reconstruction (ACLR). This study was performed to compare the short-term clinical outcomes between rectangular and round femoral tunnels in ACLR using quadriceps tendon-patellar bone (QTPB) autografts.

Methods

A total of 78 patients who underwent primary ACLR with QTPB autografts performed by three senior surgeons and had at least 1 year of postoperative follow-up were retrospectively reviewed. Patients who underwent rectangular tunnel ACLR (n = 40) were compared to those treated with the conventional round tunnel ACLR (n = 38). Outcomes including knee stability, clinical scores, quadriceps strength, associated complications, postoperative knee range of motion, and cross-sectional area of the graft were assessed.

Results

Significant improvements in knee stability and clinical scores were observed after surgery in both groups (all p < 0.001). The postoperative measurements of knee stability and clinical scores were not significantly different between the two groups. Knee extension strength deficit at 60°/sec was significantly less in the rectangular tunnel group than in the round tunnel group at postoperative 6 months (41.7% vs. 48.9%, p = 0.032). The cross-sectional area of the partial-thickness QTPB graft was approximately 60% of the full-thickness QTPB graft.

Conclusions

In the short-term, rectangular tunnel ACLR was comparable to round tunnel ACLR with QTPB autograft despite the smaller cross-sectional area. Additionally, the rectangular tunnel ACLR allowed partial-thickness grafting technique, which could subsequently reduce early donor site morbidity.

Research progress on preparation of lateral femoral tunnel and graft fixation in anterior cruciate ligament reconstruction

Anterior cruciate ligament (ACL) injury is one of the most common types of sports injuries. People's need to participate in sports and desire for a high quality of life promotes the continuous development of ACL reconstruction technology. Arthroscopic ACL reconstruction has been recognized as an effective method for the treatment of ACL injuries. This review analyses and summarizes the advantages and limitations of each surgical procedure for arthroscopic ACL reconstruction reported in the relevant literature so as to promote the future development of more relevant techniques.

The Effect of Lateral Extra-articular Tenodesis in an ACL-Reconstructed Knee With Partial Medial Meniscectomy: A Biomechanical Study

BACKGROUND

Knee laxity increases with medial meniscectomy in anterior cruciate ligament (ACL)-reconstructed knees; however, the biomechanical effect of an additional lateral extra-articular tenodesis (LET) is unknown.

PURPOSE/HYPOTHESIS

The purpose of this study was to determine the kinematic effect of a LET in knees that underwent combined ACL reconstruction (ACL-R) and partial medial meniscus posterior horn (MMPH) meniscectomy. It was hypothesized that the addition of LET would reduce laxity in the ACL-reconstructed knee.

STUDY DESIGN

Controlled laboratory study.

METHODS

Ten fresh-frozen human cadaveric knees (mean age, 41.5 years) were tested using a robotic system under 3 loads: (1) 89.0 N of anterior tibial (AT) load, (2) 5 N·m of internal rotation (IR) tibial torque, and (3) a simulated pivot shift-a combined valgus of 7 N·m and IR torque of 5 N·m-at 0°, 15°, 30°, 45°, 60°, and 90° of knee flexion. Kinematic data were acquired in 4 states: (1) intact, (2) ACL-R, (3) ACL-R + partial MMPH meniscectomy (MMPH), and (4) ACL-R + partial MMPH meniscectomy + LET (MMPH+LET).

RESULTS

In response to AT loading, there was a significant increase seen in AT translation (ATT) in the MMPH state at all knee flexion angles compared with the ACL-R state, with the highest increase at 90° of knee flexion (mean difference, 3.1 mm) (P < .001). Although there was a significant decrease in ATT at 15° of knee flexion with MMPH+LET (P = .022), no significant differences were found at other knee flexion angles (P > .05). In MMPH with IR torque, a significant increase was observed in IR at all knee flexion angles except 90° compared with the ACL-R state (range, 2.8°-4.9°), and this increase was significantly decreased at all flexion angles with the addition of LET (range, 0.7°-1.6°) (P < .05).

CONCLUSION

Performing a partial MMPH meniscectomy increased ATT and IR in response to AT and IR loads compared with the isolated ACL-R state in a cadaveric model. However, when the LET procedure was performed after partial MMPH meniscectomy, a significant decrease was seen at all knee flexion angles except 90° in response to IR and torque, and a significant decrease was seen at 15° of knee flexion in response to AT load.

CLINICAL RELEVANCE

LET may be a useful adjunct procedure after ACL-R with partial MMPH meniscectomy to reduce knee laxity.

Increased ACL direct insertion coverage provided more positive biomechanical effects on graft and bone tunnel during knee flexion: a simulation study

PURPOSE

Flattened femoral tunnels were recently applied in anatomical single-bundle anterior cruciate ligament (ACL) reconstruction. Little is known about the biomechanical effect of such changes during knee flexion. The aim of the present simulation study was to assess the effect of altered ACL direct insertion coverage on the biomechanics of the graft and bone tunnel.

METHODS

Five finite element (FE) models, including a round femoral tunnel and four progressively flattened rounded rectangular femoral tunnels, were established to represent the ACL reconstructions. In vivo knee kinematics data obtained from the validated dual fluoroscopic imaging techniques controlled the FE models to simulate lunge motions. The maximal principal stress of the graft and the volume of equivalent strain within 1000-3000 microstrain (V1000-3000) of the cancellous bone were subsequently calculated at 0°, 30°, 60° and 90° of knee flexion.

RESULTS

A lower stress state on the graft and a more beneficial strain state on the cancellous bone were observed when the femoral tunnel better covered the ACL direct insertion. The average maximal principal stress of each model were 3.93 ± 0.60 MPa, 3.82 ± 0.54 MPa, 3.43 ± 0.44 MPa, 3.45 ± 0.44 MPa and 3.05 ± 0.43 MPa, respectively. The average V1000-3000 of the cancellous bone of each model were 179.06 ± 89.62 mm3, 221.40 ± 129.83 mm3, 247.57 ± 157.78 mm3, 282.74 ± 178.51 mm3 and 295.71 ± 162.59 mm3, respectively. Both the stress and strain values exhibited two peaks during the flexion simulation. The highest value occurred at 30° of flexion, and the second highest value occurred at 90° of flexion.

CONCLUSIONS

Increased ACL direct insertion coverage provided more positive biomechanical effects after anatomical single-bundle ACL reconstruction during knee flexion.

Ultrasonic Technique for Femoral Tunnel Creation in Anterior Cruciate Ligament Reconstruction

Bone tunnel creation in the anatomical location is essential in anterior cruciate ligament (ACL) reconstruction with an autogenous graft and is commonly performed with a drill bit matched to graft diameter. Anatomic rectangular tunnel ACL reconstruction with a bone-patellar tendon-bone autograft has been developed to anatomically create bone tunnels inside the ACL footprints and has been reported to achieve excellent outcomes. To make the rectangular tunnel, the surgeon needs to dilate 2 adjacent bone tunnels after creation of 2 round tunnels with a drill bit, while the tunnel wall occasionally cracks during dilating. An ultrasonic (US) device was developed with improvement of output power and has been implemented with a rectangular shape blade in the field of arthroscopic surgery. This US device can provide a precise and effective bone cut compared to drills. We introduced this device to clinically create a rectangular tunnel during ACL reconstruction. The US device can be useful for rectangular femoral tunnel creation and can create a precise rectangular femoral tunnel in the ACL footprint.

Changes in patellar height after anatomical ACL reconstruction with BTB autograft with a focus on patellar tendon removal volume

BACKGROUND

Although anatomical anterior cruciate ligament reconstruction (ACLR) can provide satisfactory outcomes, little is known about how this procedure impacts patellar height. Since harvesting bone-patellar tendon-bone (BTB) autografts is a potential risk factor for decreased patellar height, we examined changes in patellar height after anatomical ACLR with BTB autograft with a focus on the size of the harvested graft.

METHODS

Subjects were 84 patients (49 males, 35 females; mean age, 23 years) who underwent primary anatomical ACLR with central third BTB autograft. Preoperative to postoperative Caton-Deschamps index (CDI) ratio was calculated using lateral knee radiographs before and 6 months after surgery. The length and cross-sectional area (CSA) of the graft were measured intraoperatively, and the CSA of the contralateral patellar tendon was measured by ultrasound 6 months postoperatively. The difference in graft CSA relative to the contralateral tendon CSA, expressed as a percentage (gCSA:ctCSA percentage), was also calculated.

RESULTS

Patellar height decreased slightly after surgery (preoperative CDI: 0.856 ± 0.113; postoperative CDI: 0.841 ± 0.113), with a mean difference between preoperative and postoperative CDIs of -0.015 (range: -0.293 to 0.101). Although the CDI of male subjects significantly decreased after surgery (preoperative: 0.852 ± 0.117; postoperative: 0.827 ± 0.115), no significant changes were noted in female subjects (preoperative: 0.862 ± 0.108; postoperative: 0.861 ± 0.108). Graft length and CSA did not significantly impact the CDI ratio (r = -0.138 and r = -0.038, respectively). Moreover, no significant relationship was observed between the gCSA:ctCSA percentage and CDI ratio (r = 0.118).

CONCLUSIONS

Although patellar height slightly, but significantly, decreased at 6 months after anatomical ACLR with BTB autograft, it was not affected by the length and CSA of harvested grafts. The decrease in postoperative patellar height was observed only in male subjects, suggesting the potential importance of sex differences in soft tissue healing during the postoperative period.

A Biomechanical Comparison of 2 Over-the-Top Anterior Cruciate Ligament Reconstruction Techniques: A Cadaveric Study Using a Robotic Simulator

Background

For skeletally immature patients, over-the-top (OTT) anterior cruciate ligament (ACL) reconstruction (ACLR) is preferred. However, increased anterior laxity at deep knee flexion angles remains concerning. We modified the procedure to proximally shift the graft fixation site on the femur to prevent graft loosening at higher knee flexion angles and named it the supra-OTT procedure.

Purpose

To compare anterior laxity and in situ forces of the ACL graft between conventional OTT and supra-OTT ACLR in a cadaveric model.

Study Design

Controlled laboratory study.

Methods

A total of 11 fresh-frozen cadaveric knee specimens underwent 4 robotic testing conditions: ACL intact, ACL resected, conventional OTT, and supra-OTT. For each condition, a 100-N load was applied at 0°, 15°, 30°, 60°, and 90° of knee flexion to simulate the Lachman test or anterior drawer test. In addition, a combined load of 5-N·m internal tibial torque and 10-N·m valgus torque was applied at 15° and 30° of knee flexion as a simulated pivot-shift test. Anterior tibial translation and in situ graft forces were recorded. The only difference between conventional OTT and supra-OTT ACLR was the graft fixation site on the femur. For conventional OTT ACLR, graft fixation was performed just on the proximal and lateral ends of the posterior condyle. For supra-OTT ACLR, the fixation point was around the proximal insertion of the lateral head of the gastrocnemius and the lateral edge of the posterior cortex, approximately 2 cm proximal to the conventional OTT position.

Results

On the simulated anterior drawer test at 60° and 90° of knee flexion, anterior tibial translation after supra-OTT ACLR was significantly smaller than after conventional OTT ACLR (P < .01). However, no significant differences were noted at other flexion angles or on the simulated pivot-shift test between the conventional OTT and supra-OTT procedures. Some overconstraint and higher graft forces were noted with both techniques, but the supra-OTT technique caused even more overconstraint at higher flexion angles.

Conclusion

Supra-OTT ACLR showed better biomechanical performance to control anterior laxity than conventional OTT ACLR at higher knee flexion angles.

Clinical Relevance

The supra-OTT procedure may improve anterior stability at deep knee flexion angles.

Relooking at double-bundle versus single-bundle anterior cruciate ligament reconstruction: A biomechanical model to evaluate which can confer better rotatory stability

BACKGROUND

To treat anterior cruciate ligament (ACL) injuries, double-bundle ACL reconstruction has been proposed as a more anatomical approach relative to single-bundle reconstruction. However, controversy remains over which technique is superior in addressing knee instability, particularly rotational laxity. We hypothesize that double-bundle reconstruction better restores rotational knee laxity, while both methods are similar in restoring anterior knee laxity, to intact knee levels.

METHODS

A controlled laboratory study. Eight cadaveric knees were tested accordingly: (1) static anterior laxity testing under 150 N-anterior tibial loading at 20°, 60° and 90° knee flexion using a material testing machine, followed by (2) dynamic simulated pivot-shift with knee-specific loading involving iliotibial band forces, valgus and internal rotation torques, while the knee was brought from extension to 90° flexion on a 6°-of-freedom custom-designed rig. Tibiofemoral kinematics were recorded using an electromagnetic tracking system for the ACL-intact, ACL-deficient, single-bundle and double-bundle ACL-reconstructed knee conditions.

FINDINGS

Double-bundle reconstruction reduced internal rotation under pivot-shift to levels not significantly different from ACL-intact conditions (P > .173), unlike single-bundle that remained significantly higher at 10-40° flexion (P < .05). For anterior laxity, there was no significant difference between double-bundle, single-bundle, and ACL-intact conditions under static testing (P > .175) or pivot-shift (P = .219). The maximum extent of knee envelope laxity was significantly reduced for double-bundle relative to single-bundle, particularly for the rotatory component (P = .012).

INTERPRETATION

Double-bundle was biomechanically superior to single-bundle in addressing envelope of rotation, while both techniques restored anterior knee laxity to ACL-intact levels.

No Difference in Knee Kinematics Between Anterior Cruciate Ligament-First and Posterior Cruciate Ligament-First Fixation During Single-Stage Multiligament Knee Reconstruction: A Biomechanical Study

Background:

For combined reconstruction of both the anterior cruciate ligament (ACL) and the posterior cruciate ligament (PCL), there is no consensus regarding which graft should be tensioned and fixed first.

Purpose:

The purpose of this study was to determine which sequence of graft tensioning and fixation better restores normal knee kinematics. The hypothesis was that ACL-first fixation would more closely restore normal knee kinematics, graft force, and the tibiofemoral orientation in the neutral (resting) position compared with PCL-first fixation.

Study Design:

Controlled laboratory study.

Methods:

A total of 15 unpaired human cadaveric knees were examined using a robotic testing system under the following 4 conditions: (1) 89.0-N anterior tibial load at different knee angles; (2) 89.0-N posterior tibial load at different knee angles; (3) combined rotational 7.0-N·m valgus and 5.0-N·m internal rotation load (simulated pivot shift) at 0°, 15°, and 30° of flexion; and (4) 5.0-N·m external rotation load at 0°, 15°, and 30° of flexion. The 4 evaluated knee states were (1) intact ACL and PCL (intact), (2) ACL and PCL deficient (deficient), (3) combined anatomic ACL-PCL reconstruction fixing the ACL first (ACL-first), and (4) combined anatomic ACL-PCL reconstruction fixing the PCL first (PCL-first). A 9.0 mm–diameter quadriceps tendon autograft was used for the ACL graft, tensioned with 40.0 N at 30° of flexion. A 9.5 mm–diameter hamstring tendon autograft (gracilis and semitendinosus, quadrupled loop, and augmented with an additional allograft strand if needed), tensioned with 40.0 N at 90° of flexion, was used for the PCL graft.

Results:

There were no statistically significant differences between ACL-first and PCL-first fixation regarding knee kinematics. ACL-first fixation restored anterior tibial translation to the intact state at all tested knee angles, while PCL-first fixation showed higher anterior tibial translation than the intact state at 90° of flexion (9.05 ± 3.05 and 5.87 ± 2.40 mm, respectively; P = .018). Neither sequence restored posterior tibial translation to the intact state at 30°, 60°, and 90° of flexion. At 15° of flexion, PCL-first fixation restored posterior tibial translation to the intact state, whereas ACL-first fixation did not.

Conclusion:

There were no differences in knee laxity between ACL-first and PCL-first fixation with the ACL graft fixed at 30° and the PCL graft fixed at 90°.

Clinical Relevance:

This study showed that there was no evidence to support the use of one tensioning sequence over the other in single-stage multiligament knee reconstruction.

The effects of initial graft tension on femorotibial relationship following anatomical rectangular tunnel anterior cruciate ligament reconstruction using bone-patellar tendon-bone graft

BACKGROUND

The purpose of this study was to elucidate the effects of the difference of initial graft tension on the femorotibial relationship on an axial plane and its chronological change following anatomical anterior cruciate ligament (ACL) reconstruction.

METHODS

A total of 63 patients who underwent anatomical ACL reconstruction were included in this study. The graft was fixed at full knee extension with manual maximum (higher graft tension; group H) and 80 N (lower graft tension; group L) pulls in 31 and 32 patients, respectively. The femorotibial positional relationship in axial computed tomography at 1 week and 1 year postoperatively were retrospectively evaluated. The side-to-side differences (SSDs) and the amount of changes of SSDs over 1 year were compared between groups.

RESULTS

The SSDs of the external rotational angle of the tibia in group H were significantly larger than those in group L at postoperative 1 week (2.7 ± 3.9° vs. 0.3 ± 3.3°; P < 0.01). The amount of internal rotational changes of SSDs of the internal-external rotational angles over 1 year in group H was significantly larger than that in group L (-3.6 ± 3.9° vs. - 0.3 ± 2.7°; P < 0.01). No significant differences were observed on the anterior-posterior translation distance and medial-lateral shift distance.

CONCLUSION

The application of higher initial graft tension resulted in excessive external rotation of the tibia to the femur at 1 week postoperatively in anatomical ACL reconstruction, and the excessive early external tibial rotation had resolved over 1 year.

High initial graft tension increases external tibial rotation on the axial plane after anatomical anterior cruciate ligament reconstruction

PURPOSE

The purpose of this study was to clarify the effects of applying different amounts of initial graft tension on the femorotibial positional relationship on the axial plane after anatomical ACL reconstruction.

METHODS

Eighty patients who underwent isolated ACL reconstructions using bone-patellar tendon-bone grafts were included in this study. In 40 of the 80 patients, the grafts were fixed at full knee extension with maximum manual force (high graft tension; Group H), whereas in the other 40 patients, the grafts were fixed at full knee extension with force of 80 N (low graft tension; Group L). One week postoperatively, all patients underwent computed tomography (CT) on bilateral knee joints with knee extension. The femorotibial positional relationship in axial CT images were retrospectively evaluated. Side-to-side differences (the surgical side minus the unaffected side) were calculated in these variables.

RESULTS

The side-to-side differences in anterior tibial translation distances were - 1.8 ± 2.1 mm in Group H and - 1.9 ± 2.0 mm in Group L, with no significant difference between the two groups. The side-to-side differences in tibial lateral shifts were - 0.2 ± 1.5 mm in Group H and 0.0 ± 1.4 mm in Group L, with no significant difference between the two groups. The side-to-side differences in tibial external rotation angles were 2.7 ± 4.5° in Group H and 0.3 ± 3.3° in Group L, with a significant difference between the two groups (P < 0.01).

CONCLUSION

Applying high initial graft tension (maximum manual force) resulted in the external rotation of the tibia against the femur just after anatomical ACL reconstruction. In contrast, applying low initial graft tension (80 N at full knee extension) did not change the femorotibial rotational relationship.

Influence of hamstring tendon and bone-patellar tendon-bone autografts on worsened patient reported outcome measurements in revision anterior cruciate ligament reconstruction: Comparing outcomes between primary and revision reconstructions

Background

This study aimed to compare the clinical outcomes and patient reported outcome measurement scales (PROMs) between hamstring tendon (HT) or bone-patellar tendon-bone (BTB) grafts in each primary and revision anterior cruciate ligament (ACL) reconstruction. Additionally, the clinical outcomes and PROMs between primary and revision surgeries were compared.

Methods

A total of 150 patients (109 primary and 41 revision ACL reconstructions) were enrolled and followed up for an average of 3.9 years (2 years minimum). Knee injury and osteoarthritis outcome scores (KOOS) were examined as PROMs. Side-to-side differences of anterior knee laxity were assessed using KT-1000 and were recorded at the final follow-up. After categorizing patients into HT and BTB reconstruction groups, regression analysis was performed to determine the relationship between revision surgery and changes in KOOS.

Results

In patients who underwent primary surgery, there was no significant difference in side-to-side differences of anterior laxity and KOOS between HT and BTB grafts. In those who underwent revision surgery, BTB grafts had a higher KOOS for activities of daily living (ADL) than HT grafts (p = 0.032). Comparing primary and revision surgeries, postoperative side-to-side differences of anterior laxity in the revision group were significantly larger than those in the primary group (p = 0.001). The KOOS for sports after overall revision reconstruction was significantly lower than that after primary reconstruction (p = 0.026). Comparing the KOOS after dividing all patients into HT and BTB reconstruction groups, in the HT reconstruction group, postoperative KOOS results were not different in any subscale from BTB grafts. In contrast, the KOOS for sports (p = 0.008) and QOL (p = 0.039) were significantly lower in revision surgery than in primary surgery. Furthermore, regression analysis including multiple confounders in the HT reconstruction group showed revision surgery using HT graft was correlated with worsened KOOS for symptoms (p = 0.012) and sports (p = 0.010). Revision surgery using BTB graft was not correlated with decreased KOOS.

Conclusions

There were no differences between the clinical outcome and KOOS in primary and revision surgery, except for ADL scores following revision ACL reconstruction using BTB graft. Side-to-side difference of anterior laxity and KOOS for sports following revision ACL reconstruction were inferior to those following primary ACL reconstruction.Furthermore, revision ACL reconstruction using HT grafts were correlated with low scores in KOOS for symptoms and sports, while there was no difference of anterior laxity between BTB and HT grafts in revision surgery.

No Differences In Clinical Outcomes Between Rectangular and Round Tunnel Techniques For Anterior Crucial Ligament Reconstruction

PURPOSE

To compare the clinical outcomes between conventional round tunnel and rectangular tunnel in anatomic anterior cruciate ligament (ACL) reconstruction.

METHODS

This was a retrospective comparative cohort study between March 2015 and September 2018. The primary ACL reconstructions using anteromedial portal technique with minimum of 2 years follow-up were enrolled for this study. The exclusion criteria were patients with revision ACL reconstruction, high tibial osteotomy, multiligament injuries, and associated fractures around the knee. Outcome measures included the subjective International Knee Documentation Committee score, Tegner activity score, knee laxity testing, and measurement of the centers of the femoral and tibial tunnels on postoperative computed tomography (CT) images.

RESULTS

Forty-seven patients with ACL reconstruction with rectangular tunnel (group 1) and 108 patients with ACL reconstructions with conventional rounded tunnel (group 2) were included consecutively. There were no significant differences between groups in terms of clinical scores or knee laxity, as well as femoral and tibial tunnel positions on CT. One patient in group 2 had ACL failure because of trauma and was treated with revision surgery. Two patients had incomplete tibial fracture, but they healed spontaneously and showed no residual laxity at final follow-up. The intraobserver and interobserver reliability for the radiological measurements ranged from 0.78 to 0.86.

CONCLUSIONS

There were no differences in radiological and clinical results between rectangular tunnel group and conventional round tunnel group for arthroscopic ACL reconstruction. ACL reconstruction with a rectangular tunnel could be considered as a reliable technique, but care should be taken during tunnel establishment because of risk of fractures and malposition of rectangular tunnel.

Anatomical rectangular tunnel anterior cruciate ligament reconstruction provides excellent clinical outcomes

PURPOSE

The purpose of this study was to prospectively evaluate the clinical outcomes following anatomical rectangular tunnel anterior cruciate ligament (ACL) reconstruction with a bone-patellar tendon-bone (BTB) graft using an adjustable-length femoral cortical fixation device with enough patients and a high follow-up rate.

METHODS

This study included 125 patients who underwent anatomical rectangular tunnel ACL reconstruction with a BTB graft. A BTB TightRope^® was used for femoral graft fixation. Clinical evaluations were performed more than 2 years after surgery using the International Knee Documentation Committee (IKDC) Form. Patients interviewed by telephone were only subjectively evaluated. The side-to-side difference in anterior laxity at a manual maximum force was measured using the KT-2000 Arthrometer^®.

RESULTS

Among the 125 patients, 99 were ultimately included and 26 were lost to follow-up (follow-up rate: 79%). Eight patients had re-tear (re-tear rate: 8%) and six patients had ACL injuries to the contralateral knee. Three patients did not follow our rehabilitation programme. One patient suffered septic arthritis. These 18 patients were considered ineligible for clinical evaluations. Therefore, clinical evaluations were performed in 81 of the 99 patients (64 were available for direct follow-up and 17 were available for a telephone interview). The follow-up period was 30 ± 10 months (range 24-68 months). According to the IKDC subjective assessment, 48 (59%) and 33 (41%) knees were graded as normal and nearly normal, respectively. A loss of extension (3°-5°) was observed in five patients (8%), whereas one patient (2%) exhibited a loss of flexion (3°-5°). The Lachman test was negative in 63 patients (98%). The pivot shift test was negative in 59 patients (92%). The side-to-side difference in KT value was 0.4 ± 0.7 mm (range - 1-4 mm).

CONCLUSION

Anatomical rectangular tunnel ACL reconstruction with a BTB graft using an adjustable-length femoral cortical fixation device provided excellent clinical outcomes both subjectively and objectively more than 2 years after surgery, whereas 8 of the 99 patients had re-tear of the graft. The adjustable-length femoral cortical fixation device could be safely used in anatomical rectangular tunnel ACL reconstruction with a BTB graft.

LEVEL OF EVIDENCE

III.

Flat-Tunnel Technique With Independently Tensioned Bundles Better Restores Rotational Stability Than Round-Tunnel Technique in Anatomic Anterior Cruciate Ligament Reconstruction Using Hamstring Graft: A Cadaveric Biomechanical Study

PURPOSE

To investigate the kinematics differences between round-tunnel (ROT) and flat-tunnel (FLT) techniques in anterior cruciate ligament (ACL) reconstruction when using hamstring graft.

METHODS

Nine matched pairs of fresh-frozen cadaveric knees were evaluated for the kinematics of intact, ACL-sectioned, and either ROT or FLT reconstructed knees. The graft bundles for FLT technique were separately tensioned. A 6 degrees of freedom robotic system was used to assess knee laxity: (1) 134-N anterior tibial load at 0°, 15°, 30°, 60°, and 90°of knee flexion; (2) 10 Nm of valgus torque followed by 5 Nm of internal rotation torque simulates a pivot-shift test at 15° and 30°; (3) 5-Nm internal and external rotation torques at 0°, 15°, 30°, 60°, and 90°; (4) 10-Nm varus and valgus torques at 15° and 30°.

RESULTS

Significant differences were found for ROT versus FLT techniques in terms of the simulated pivot-shift test at 15° (2.5 mm vs 1.4 mm, respectively, difference from intact; P =.039) and the internal rotation test at 15° (2.5° vs 0.5°, respectively, difference from intact; P =.034) and 30° (2.0° vs 0.4°, respectively, difference from intact; P =.014). No significant differences were found between groups during 134-N anterior tibial load, external rotation and valgus/varus rotation. Neither technique was able to reproduce the intact state during an anterior tibial load and simulated pivot-shift test.

CONCLUSIONS

The FLT technique with independently tensioned bundles shows the same anterior control as the ROT technique but better restores rotational stability in terms of the simulated pivot-shift test and the internal rotation test in anatomic ACL reconstruction at time zero.

CLINICAL RELEVANCE

The FLT technique with independently tensioned bundles of ACL reconstruction appears to be a viable, more anatomic technique than the ROT technique in mimicking flat anatomy and rotational stability of native ACL.

ACL graft with extra-cortical fixation rotates around the femoral tunnel aperture during knee flexion

PURPOSE

An understanding of the behavior of a new ACL graft in the femoral tunnel during knee motion and external loading can provide information pertinent to graft healing, tunnel enlargement, and graft failure. The purpose of the study was to measure the percentage of the tunnel filled by the graft and determine the amount and location of the graft-tunnel contact with knee motion and under external knee loads.

METHODS

Single bundle anatomical ACL reconstruction was performed on six cadaveric knees. Specimens were positioned with a robotic testing system under: (1) passive flexion-extension, (2) 89-N anterior and posterior tibial loads, (3) 5-N m internal and external torques, and (4) 7-N m valgus moment. The knees were then dissected, repositioned by the robot and the geometry of the femoral tunnel and graft were digitized by laser scanning. The percentage of tunnel filled and the contact region between graft and tunnel at the femoral tunnel aperture were calculated.

RESULTS

The graft occupies approximately 70% of the femoral tunnel aperture and anterior tibial loading tended to reduce this value. The graft contacted about 60% of the tunnel circumference and the location of the graft-tunnel contact changed significantly with knee flexion.

CONCLUSION

This study found that the graft tends to rotate around the tunnel circumference during knee flexion-extension and contract under knee loading. The "windshield-wiper" and "bungee cord" effect may contribute to femoral tunnel enlargement, affect graft healing, and lead to graft failure. There can be a considerable motion of the graft in the tunnel after surgery and appropriate rehabilitation time should be allowed for graft-tunnel healing to occur. To reduce graft motion, consideration should be given to interference screw fixation or a graft with bone blocks, which may allow an earlier return to activity.

The Resistance Force of the Anterior Cruciate Ligament during Pull Probing Is Related to the Mechanical Property

There are various methods for reconstructing the anterior cruciate ligament (ACL) from other muscles or tendons. Initial tension of the reconstructed ACL is one of the key elements affecting postoperative outcomes. However, tension cannot be measured after graft fixation. The only intraoperative assessment is pull probing, which is performed by pulling joint soft tissues with the arthroscopic probe and can be measured quantitatively. Therefore, its value might be used as an alternative value for the mechanical property of the ACL. Using a probing device one author developed to measure the resistance force of soft tissues quantitatively while probing, we measured the resistance force of dissected ACLs and used tensile testing to investigate the correlation between the resistance force and the mechanical property of the ligaments. According to the results, when a certain amount of tension (strain; 16.6%) was applied, its mechanical properties were moderately correlated (r = 0.56 [p = 0.045]) with the probing force. Therefore, the tension of the reconstructed ACL after fixation under real ACL reconstruction surgery can be derived from the value of the probing device.

Technical note: rectangular femoral tunnel for anterior cruciate ligament reconstruction using a new ultrasonic device: a feasibility study

PURPOSE

The goal of this preliminary report was to show the use of novel Ultrasound (US) technology for anterior cruciate ligament (ACL) reconstruction surgery and evaluate its feasibility for the creation of a rectangular femoral bone tunnel during an arthroscopic procedure in a human cadaver model.

METHODS

Two fresh frozen human cadaver knees were prepared for arthroscopic rectangular femoral tunnel completion using a prototype US device (OLYMPUS EUROPA SE & CO. KG). The desired rectangular femoral tunnel was intended to be located in the femoral anatomical ACL footprint. Its tunnel aperture was planned at 10 × 5 mm and a depth of 20 mm should be achieved. For one knee, the rectangular femoral tunnel was realized without a specific cutting guide and for the other with a 10 × 5 mm guide. One experienced orthopedic surgeon performed the two procedures consecutively. The time for femoral tunnel completion was evaluated. CT scans with subsequent three-dimensional image reconstructions were performed in order to evaluate tunnel placement and configuration.

RESULTS

In the two human cadaver models the two 10 × 5x20mm rectangular femoral tunnels were successfully completed and located in the femoral anatomical ACL footprint without adverse events. The time for femoral tunnel completion was 14 min 35 s for the procedure without the guide and 4 min 20 s with the guide.

CONCLUSION

US technology can be used for the creation of a rectangular femoral bone tunnel during an arthroscopic ACL reconstruction procedure. The use of a specific cutting guide can reduce the time for femoral tunnel completion. Additional experience will further reduce the time of the procedure.

No Difference in Ligamentous Strain or Knee Kinematics Between Rectangular or Cylindrical Femoral Tunnels During Anatomic ACL Reconstruction With a Bone-Patellar Tendon-Bone Graft

BACKGROUND

As our understanding of anterior cruciate ligament (ACL) anatomy has evolved, surgical techniques to better replicate the native anatomy have been developed. It has been proposed that the introduction of a rectangular socket ACL reconstruction to replace a ribbon-shaped ACL has the potential to improve knee kinematics after ACL reconstruction.

PURPOSE

To compare a rectangular femoral tunnel (RFT) with a cylindrical femoral tunnel (CFT) in terms of replicating native ACL strain and knee kinematics in a time-zero biomechanical anatomic ACL reconstruction model using a bone-patellar tendon-bone (BTB) graft.

STUDY DESIGN

Controlled laboratory study.

METHODS

In total, 16 fresh-frozen, human cadaveric knees were tested in a 5 degrees of freedom, computed tomography-compatible joint motion simulator. Knees were tested with the ACL intact before randomization to RFT or CFT ACL reconstruction using a BTB graft. An anterior translation load and an internal rotation moment were each applied at 0°, 30°, 60°, and 90° of knee flexion. A simulated pivot shift was performed at 0° and 30° of knee flexion. Ligament strain and knee kinematics were assessed using computed tomography facilitated by insertion of zirconium dioxide beads placed within the substance of the native ACL and BTB grafts.

RESULTS

For the ACL-intact state, there were no differences between groups in terms of ACL strain or knee kinematics. After ACL reconstruction, there were no differences in ACL graft strain when comparing the RFT and CFT groups. At 60° of knee flexion with anterior translation load, there was significantly reduced strain in the reconstructed state ([mean ±standard deviation] CFT native, 2.82 ± 3.54 vs CFT reconstructed, 0.95 ± 2.69; RFT native, 2.77 ± 1.71 vs RFT reconstructed, 1.40 ± 1.76) independent of the femoral tunnel type. In terms of knee kinematics, there were no differences when comparing the RFT and CFT groups. Both reconstructive techniques were mostly effective in restoring native knee kinematics and ligament strain patterns as compared with the native ACL.

CONCLUSION

In the time-zero biomechanical environment, similar graft strains and knee kinematics were achieved using RFT and CFT BTB ACL reconstructions. Both techniques appeared to be equally effective in restoring kinematics associated with the native ACL state.

CLINICAL RELEVANCE

These data suggest that in terms of knee kinematics and graft strain, there is no benefit in performing the more technically challenging RFT as compared with a CFT BTB ACL reconstruction.

Minimal tibial tunnel enlargement after anatomic rectangular tunnel anterior cruciate ligament reconstruction with bone-patellar tendon-bone graft

BACKGROUND

The purpose of this study was to evaluate the tibial tunnel enlargement after the anatomical rectangular tunnel (ART) anterior cruciate ligament reconstruction (ACLR) with a bone-patellar tendon-bone (BTB) graft and to elucidate the correlation between the enlargement and length of the tendinous portion inside the tibial tunnel. In addition, we aimed to analyze the correlation between patient characteristics and tibial tunnel enlargement.

METHODS

This study included 50 patients who underwent ART ACLR. Lateral radiographs at the time of surgery and at 2 years were compared to evaluate the tibial tunnel enlargement. Subsequently, correlations between the tunnel enlargement and (1) length of tendinous portion inside the tibial tunnel or (2) characteristics of the patients, including anterior knee laxity measured by KT-1000 arthrometer, age, sex, height, body weight, and Tegner activity level scale, were analyzed.

RESULTS

The tibial tunnel was enlarged by 2.6 ± 4.2% 2 years postoperatively. The length of the tendinous portion inside the tibial tunnel was 7.8 ± 4.9 mm. There was no significant correlation between tunnel enlargement and length of tendinous portion inside the tunnel. None of the patient characteristics were detected as a risk factor for tibial tunnel enlargement.

CONCLUSIONS

(1) The postoperative tibial tunnel enlargement was minimum after ART ACLR with a BTB graft. (2) There was no correlation between tibial tunnel enlargement and length of tendinous portion of BTB graft inside the tunnel. (3) None of the patient characteristics were detected as a risk factor of the tibial tunnel enlargement.

Japanese Orthopaedic Association (JOA) clinical practice guidelines on the management of anterior cruciate ligament injury - Secondary publication

BACKGROUND

This clinical guideline presents recommendations for the management of patients with anterior cruciate ligament (ACL) injury, endorsed by the Japanese Orthopaedic Association (JOA) and Japanese Orthopaedic Society of Knee, Arthroscopy and Sports Medicine (JOSKAS).

METHODS

The JOA ACL guideline committee revised the previous guideline based on "Medical Information Network Distribution Service Handbook for Clinical Practice Guideline Development 2014", which proposed a desirable method for preparing clinical guidelines in Japan. Furthermore, the importance of "the balance of benefit and harm" was also emphasized. This guideline consists of 21 clinical questions (CQ) and 23 background questions (BQ). For each CQ, outcomes from the literature were collected and evaluated systematically according to the adopted study design.

RESULTS

We evaluated the objectives and results of each study in order to make a decision on the level of evidence so as to integrate the results with our recommendations for each CQ. For BQ, the guideline committee proposed recommendations based on the literature.

CONCLUSIONS

This guideline is intended to be used by physicians, orthopedic surgeons, physical therapists, and athletic trainers managing ACL injuries. We hope that this guideline is useful for appropriate decision-making and improved management of ACL injuries.

A more flattened bone tunnel has a positive effect on tendon-bone healing in the early period after ACL reconstruction

PURPOSE

The purpose of this study was to evaluate whether a flattened bone tunnel has a positive effect on the tendon-bone healing (TBH) process in the early period after anterior cruciate ligament (ACL) reconstruction.

METHODS

Seventy-two New Zealand White rabbits were randomly allocated into two groups, the flattened tunnel (FT) group and the conventional round tunnel (RT) group. We compared the cross-sectional areas and diameters of the bone tunnels between the two groups through computed tomography (CT) scanning. TBH results between the two groups were assessed by histological analysis, micro-CT scanning and biomechanical tests at 4 weeks, 8 weeks and 12 weeks after operation.

RESULTS

The cross-sectional areas of the bone tunnels between the two groups were almost the same. However, the shape of bone tunnels in the FT group was more flattened. A faster cellular and collagen remoulding process were found in the FT group. Semiquantitative histological analysis of Safranin O staining showed that there was more fibrocartilage formation in the interface region in the FT group (P < 0.05). Sirius Red staining showed that the tissues in the interface areas were more intense in the FT group. Micro-CT scanning showed that more new bone formation could be found in the interface region in the FT group. The biomechanical tests also showed that FT ACL reconstruction will result in a stronger regenerated tendon-bone interface.

CONCLUSIONS

Our study found that a flattened bone tunnel accelerated TBH in the early period after ACL reconstruction surgery in a rabbit model, which lays the groundwork for further clinical practice of this ACL reconstruction method.

Anatomical rectangular tunnels identified with the arthroscopic landmarks result in excellent outcomes in ACL reconstruction with a BTB graft

PURPOSE

To elucidate tunnel locations and clinical outcomes after anatomic rectangular tunnel (ART) anterior cruciate ligament reconstruction (ACLR) using a bone-patellar tendon-bone (BTB) graft.

METHODS

Sixty-one patients with a primary unilateral ACL injury were included. Tunnels were created inside the ACL attachment areas after carefully removing the ACL remnant and clearly identifying the bony landmarks. Using 3-dimensional computed tomography (3-D CT) images, the proportion of the tunnel apertures to the anatomical attachment areas was evaluated at 3 weeks. The clinical outcomes were evaluated at 2 years postoperatively.

RESULTS

Geographically, the 3-D CT evaluation showed the entire femoral tunnel aperture; at least 75% of the entire tibial tunnel aperture area was consistently located inside the anatomical attachment areas surrounded by the bony landmarks. In the International Knee Documentation Committee (IKDC) subjective assessment, all patients were classified as 'normal' or 'nearly normal'. The Lachman test and pivot-shift test were negative in 98.4% and 95.1% of patients, respectively. The mean side-to-side difference of the anterior laxity at the maximum manual force with a KT- 1000 Knee Arthrometer was 0.2 ± 0.9 mm, with 95.1% of patients ranging from - 1 to + 2 mm.

CONCLUSION

By identifying arthroscopic landmarks, the entire femoral tunnel aperture and at least 75% of the entire tibial tunnel aperture area were consistently located inside the anatomical attachment areas. With properly created tunnels inside the anatomical attachment areas, the ART ACLR using a BTB graft could provide satisfactory outcomes both subjectively and objectively in more than 95% of patients.

LEVEL OF EVIDENCE

Case series, Level IV.

Positioning the femoral bone socket and the tibial bone tunnel using a rectangular retro-dilator in anterior cruciate ligament reconstruction

Purpose

The purpose of this study was to evaluate the positions of femoral bone sockets and tibial bone tunnels made with the rectangular retro-dilator (RRD), which we manufactured for anterior cruciate ligament reconstruction (ACLR) with a bone-patella tendon-bone (BPTB) graft which is fixed into the rectangular bone socket and tunnel made at anatomical ACL insertion sites.

Methods

42 patients who had undergone ACLR with BPTB using the RRD were evaluated to assess bone socket and tunnel positions by the quadrant method and Magnussen classification using three-dimensional (3-D) CT. Intra-operative complications were also investigated in all patients.

Results

3-D CT of the operated knee joints using the RRD showed that the bone socket and tunnel were placed in anatomical positions. In the quadrant method, the mean position of the femoral bone socket aperture was located at 22.0 ± 4.2% along the Blumensaat’s line, and 37.4 ± 7.2% across the posterior condylar rim. The mean positions of the tibial bone tunnel aperture were 37.7 ± 5.2% and 46.1 ± 2.2% antero-posteriorly and medio-laterally, respectively. In addition, according to the Magnussen classification, 39 cases were evaluated as type 1, and almost all were located behind the lateral intercondylar ridge (also known as the resident’s ridge). 3 cases were classified as type 2, which overlapped with the resident’s ridge. A partial fracture of BPTB bone fragment was observed in 2 patients, but no serious complications including neurovascular injury were observed.

Conclusion

The study indicates that the use of RRD achieves a safe anatomical reconstruction of the ACL.

A Biomechanical Comparison of Single-, Double-, and Triple-Bundle Anterior Cruciate Ligament Reconstructions Using a Hamstring Tendon Graft

PURPOSE

The first objective of our cadaveric study was to perform a biomechanical comparison of single-bundle (SB), double-bundle (DB), and triple-bundle (TB) anterior cruciate ligament (ACL) reconstructions using a hamstring tendon graft to determine the laxity match pre-tension (LMP) value, which is the tension within the graft required to re-create the same anterior laxity as the ACL-intact knee. The second objective was to determine the anterior laxity and force distribution during the application of both an anterior force and a simulated pivot-shift test.

METHODS

Eleven fresh-frozen cadaveric knees were tested using a robotic/universal force-moment sensor system in the intact state, TB-reconstructed knee, DB-reconstructed knee, and SB-reconstructed knee. The LMP in each reconstruction was recorded. Each reconstructed knee was tested with an external load of 100-N anterior drawer and combined rotatory loads of 10-Nm valgus moment and 5-Nm internal rotation. The anterior tibial translation and tensile forces of each graft bundle were measured.

RESULTS

The LMP values for the TB reconstruction were 1.7 N for the anteromedial-medial graft, 1.7 N for the anteromedial-lateral graft, and 3.4 N for the posterolateral graft (PLG). The LMP value was 5.6 N for the anteromedial graft and PLG in the DB reconstruction. The LMP value was 26.3 N for the whole graft in the SB reconstruction. No statistically significant difference in stability was found between TB and DB reconstructions during the anterior load and the combined rotatory load test. For force distribution, the PLG tension in the TB reconstruction was statistically lower than that in the DB reconstruction.

CONCLUSIONS

Anatomic TB ACL reconstruction with the lowest initial tension on the graft stabilized the knee equally to DB or SB reconstruction, which required greater initial tension.

CLINICAL RELEVANCE

Although SB, DB, and TB ACL reconstructions through the anatomic tunnel position could equally restore stability, the initial tension on the graft required to restore stability was less in the latter 2 multi-tunnel reconstructions.

ACL Function in Bicruciate-Retaining Total Knee Arthroplasty

BACKGROUND

Bicruciate-retaining total knee arthroplasty (BCR-TKA) is attracting attention because of the functional and satisfaction outcomes associated with keeping the anterior cruciate ligament (ACL) intact. However, knowledge of the functional importance of the ACL after BCR-TKA is limited. We performed a biomechanical investigation of ACL function following BCR-TKA compared with that in the intact knee.

METHODS

We investigated 8 fresh-frozen human cadaveric knees using a 6-degrees-of-freedom robotic system that allowed natural joint motion. Three knee states-intact knee, BCR-TKA, and BCR-TKA with ACL transection (BCR-TKA + ACLT)-were evaluated. For each knee state, the kinematics during passive flexion-extension motion (from 0° to 120°) and anteroposterior laxity at 0°, 15°, 30°, 60°, and 90° of flexion in response to a 100-N load were investigated. The recorded knee motions of the intact and BCR-TKA knees during each test were repeated after ACLT to calculate the ACL in situ force.

RESULTS

The femur in the BCR-TKA group translated posteriorly and rotated externally during passive knee flexion and was in an anterior position compared with the femur in the intact-knee state. After ACLT, the femur translated posteriorly, compared with the BCR-TKA group, at 0° and 10° (p < 0.05). The anteroposterior laxities of the BCR-TKA and intact knees were comparable at all flexion angles and increased 2-fold or more after ACLT (p < 0.01). The ACL in situ force in the BCR-TKA knees was 2-fold to 6-fold higher than that in the intact knees at 0°, 15°, 90°, and 120° during a passive path (p < 0.05) and equivalent to that in the intact knees under anterior loading.

CONCLUSIONS

The preserved ACL in the BCR-TKA knees was functional, like the ACL in the intact knees, under anterior tibial loading and contributed to good anteroposterior stability. However, the kinematics and ACL in situ force differed between the intact and BCR-TKA knees during passive flexion-extension movements.

CLINICAL RELEVANCE

Surgeons may not be able to prevent overtensioning of the ACL during a standardized BCR-TKA procedure, which could potentially limit range of motion.

Anterior cruciate ligament graft fixation first in anterior and posterior cruciate ligament reconstruction best restores knee kinematics

PURPOSE

To evaluate the effect of different graft fixation sequences in one-stage anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) reconstruction on (1) knee biomechanics and (2) tibiofemoral alignment.

METHODS

Twelve porcine knees were used in this study. Five fixation sequences were performed (angle indicating knee flexion): (a) PCL at 30° and ACL at 30°, (b) PCL at 90° and ACL at 30°, (c) ACL at 30° and PCL at 30°, (d) ACL at 30° and PCL at 90°, and (e) ACL and PCL simultaneous fixation at 30°. Anterior and posterior tibial translation was measured under an 89 N load. A 3-D digitizer was used to measure the change in anteroposterior (AP) tibiofemoral position.

RESULTS

None of the graft fixation sequences restored the AP laxity of the intact knee, and there are minimal differences in the in situ tissue forces in the ACL and PCL grafts. The reconstructions with fixation of the PCL graft first resulted in a significantly larger change in AP tibiofemoral position from the intact knee at 60° and 90° of knee flexion than the reconstructions with fixation of the ACL graft first (p < 0.05).

CONCLUSION

Fixation of the ACL graft at 30° of knee flexion followed by fixation of the PCL graft can best restore the tibiofemoral position of the intact knee. This study has clinical relevance in regard to the effect of graft fixation sequence on the position of the tibia relative to the femur in one-stage ACL and PCL reconstruction.

Medial collateral ligament reconstruction is necessary to restore anterior stability with anterior cruciate and medial collateral ligament injury

PURPOSE

The purpose of this study was to compare knee kinematics and graft forces in anterior cruciate ligament (ACL) reconstruction combined with one of two superficial medial collateral ligament (sMCL) reconstruction techniques (parallel or triangular vector sMCL reconstruction).

METHODS

Twenty porcine knees were divided into two groups (n = 20), parallel or triangular vector sMCL reconstruction, with both groups having anatomic single-bundle ACL reconstruction. The knees were tested under (1) an 89-N anterior tibial load, (2) 4 Nm internal and external rotational tibial torques, and (3) a 7 Nm valgus torque.

RESULTS

With ACL/sMCL co-injuries, single-bundle ACL reconstruction alone does not restore anterior, valgus, and internal stability. Triangular vector sMCL reconstruction better restored anterior stability, and parallel sMCL reconstruction better restored valgus stability.

CONCLUSION

This study showed that single-bundle ACL reconstruction alone was not able to restore anterior tibial translation, valgus rotation, and external rotation of the intact knee with combined ACL and sMCL injuries and sMCL reconstruction was also required. The combined ACL and parallel sMCL reconstruction better restored valgus and external rotation stability, while the combined ACL and triangular vector method better restored anterior tibial translation. With combined ACL and severe sMCL injury, both ligaments should be reconstructed. The two sMCL reconstruction techniques exhibited slightly different kinematics and graft force; however, there was not enough difference to recommend one over the other.

Contact area between femoral tunnel and interference screw in anatomic rectangular tunnel ACL reconstruction: a comparison of outside-in and trans-portal inside-out techniques

PURPOSE

The purpose of this study was to compare the femoral tunnel length, the femoral graft bending angle at the femoral tunnel aperture, and the contact area between the femoral tunnel wall and an interference screw used for fixation in anatomic rectangular tunnel anterior cruciate ligament (ACL) reconstruction (ART ACLR).

METHODS

The study included 149 patients with primary ACL injury who underwent ART ACLR. Preoperatively, flexion angle of the index knee was checked under general anaesthesia. Those of less than 130° of passive flexion were assigned to the outside-in (OI) technique (78 patients), while the others to the trans-portal inside-out (TP) technique (71 patients). The patients underwent computed tomography with multiplanar reconstruction at 3-5 weeks post-operatively. Femoral tunnel length, graft bending angle, and contact ratio between the IFS and femoral tunnel were assessed. P < 0.05 was considered statistically significant.

RESULTS

The femoral tunnel length in the OI technique was significantly longer than that in the TP technique (P < 0.001). The femoral graft bending angle in the OI technique was significantly more acute than that in the TP technique (P < 0.001). The contact ratio in the OI technique was significantly larger than that in the TP technique at every point in the femoral tunnel (P < 0.001).

CONCLUSIONS

The OI technique resulted in a more acute femoral graft bending angle, longer mean femoral tunnel length, and larger contact ratio than the TP technique after ART ACLR.

LEVEL OF EVIDENCE

Retrospective comparative study, Level III.

Anterolateral rotatory instability in vivo correlates tunnel position after anterior cruciate ligament reconstruction using bone-patellar tendon-bone graft

AIM

To quantitatively assess rotatory and anterior-posterior instability in vivo after anterior cruciate ligament (ACL) reconstruction using bone-patellar tendon-bone (BTB) autografts, and to clarify the influence of tunnel positions on the knee stability.

METHODS

Single-bundle ACL reconstruction with BTB autograft was performed on 50 patients with a mean age of 28 years using the trans-tibial (TT) (n = 20) and trans-portal (TP) (n = 30) techniques. Femoral and tibial tunnel positions were identified from the high-resolution 3D-CT bone models two weeks after surgery. Anterolateral rotatory translation was examined using a Slocum anterolateral rotatory instability test in open magnetic resonance imaging (MRI) 1.0-1.5 years after surgery, by measuring anterior tibial translation at the medial and lateral compartments on its sagittal images. Anterior-posterior stability was evaluated with a Kneelax3 arthrometer.

RESULTS

A total of 40 patients (80%) were finally followed up. Femoral tunnel positions were shallower (P < 0.01) and higher (P < 0.001), and tibial tunnel positions were more posterior (P < 0.05) in the TT group compared with the TP group. Anterolateral rotatory translations in reconstructed knees were significantly correlated with the shallow femoral tunnel positions (R = 0.42, P < 0.01), and the rotatory translations were greater in the TT group (3.2 ± 1.6 mm) than in the TP group (2.0 ± 1.8 mm) (P < 0.05). Side-to-side differences of Kneelax3 arthrometer were 1.5 ± 1.3 mm in the TT, and 1.7 ± 1.6 mm in the TP group (N.S.). Lysholm scores, KOOS subscales and re-injury rate showed no difference between the two groups.

CONCLUSION

Anterolateral rotatory instability significantly correlated shallow femoral tunnel positions after ACL reconstruction using BTB autografts. Clinical outcomes, rotatory and anterior-posterior stability were overall satisfactory in both techniques, but the TT technique located femoral tunnels in shallower and higher positions, and tibial tunnels in more posterior positions than the TP technique, thus increased the anterolateral rotation. Anatomic ACL reconstruction with BTB autografts may restore knee function and stability.

Biomechanical characteristics of the anatomic rectangular tunnel anterior cruciate ligament reconstruction with a bone-patellar tendon-bone graft

PURPOSE

To clarify 1) the force sharing between two portions of BTB graft in anatomic rectangular tunnel (ART) reconstruction and 2) the knee stability in ART technique under anterior tibial load.

METHODS

Eleven fresh cadaveric knees were used. First, anterior-posterior (A-P) laxity was measured with Knee Laxity Tester^® in response to 134 N of A-P tibial load at 20° on the normal knees. Then ART ACL reconstruction was performed with a BTB graft. For graft, the patellar bone plug and tendon portion was longitudinally cut into half as AM and PL portions. After the tibial bone plug was fixed at femoral aperture, AM/PL portions were connected to the tension-adjustable force gauges at tibial tubercle, and were fixed with 10 N to each portion at 20°. Then the tension was measured 1) under anterior tibial load of 134 N at 0, 30, 60, and 90°, and 2) during passive knee extension from 120 to 0°. Next the graft tension was set at 0, 10, 20, 30, or 40 N at 20°, and the A-P laxity was measured by applying A-P load of 134 N. By comparing the laxity for the normal knee, the tension to restore the normal A-P laxity (LMP) was estimated.

RESULTS

The AM force was significantly smaller at 0° and larger at 90° than the PL force under anterior load, while the force sharing showed a reciprocal pattern. During knee extension motion, the tension of both portions gradually increased from around 5 N to 20-30 N with knee extended. And the LMP was 1.6 ± 1.0 N with a range from 0.3 to 3.5 N.

CONCLUSION

The pattern of force sharing was similar to that in the normal ACL in response to anterior tibial load and during passive knee extension motion. LMP in this procedure was close to the tension in the normal ACL.

LEVEL OF EVIDENCE

Level IV, a controlled-laboratory study.

Anterior Cruciate Ligament Reconstruction With Bone-Patellar Tendon-Bone Graft Through a Rectangular Bone Tunnel Made With a Rectangular Retro-dilator: An Operative Technique

Good clinical results have been reported with anatomic anterior cruciate ligament (ACL) reconstructions in which rectangular bone-patellar tendon-bone (BTB) grafts were fixed into rectangular bone tunnels made at anatomic ACL insertion sites of the femur and tibia (anatomic rectangular tunnel BTB ACL reconstruction). Notwithstanding these good results, some problems have remained unsolved, including procedural complexity and risk of damage to the femoral posterior tunnel wall, damage to nerves and blood vessels, and damage to cartilage. The purpose of this report is to present our technique of ACL reconstruction with BTB graft through a rectangular bone tunnel made with a rectangular retro-dilator. Our procedure may become a safe option for anatomic rectangular tunnel BTB ACL reconstruction because of the following advantages: (1) bone tunnels can be created more safely and accurately than in methods using transtibial and far medial portals, (2) the bone tunnel preparation procedure is less invasive than the standard outside-in method, (3) technical failure-related risks are lower because the guidewire is inserted only once, and (4) the operation time is shorter because the method is a single-bundle procedure.

The biomechanical effects of graft rotation on ACL reconstruction tunnel mismatch

PURPOSE

Bone block protrusion out of the tibial tunnel due to a relatively long graft is a common complication in anterior cruciate ligament surgical reconstruction with a patellar tendon. One possible solution is to shorten the patellar tendon graft already fixed in the femur by applying external rotation. This study aimed to evaluate the degree of shortening and biomechanical changes in porcine patellar grafts subjected to relatively higher degrees of rotation. Data obtained with rotations of 0°, 540°, 720°, and 900° were compared.

METHODS

Forty patellar porcine ligaments were subjected to biomechanical tests of degree of shortening, modulus of elasticity and maximum tension in the tendon before rupture. Tests were conducted using a universal mechanical testing machine and a computerized system for acquiring strength and deformation data.

RESULTS

Progressive shortening of the patellar ligament occurred with rotations of 0°, 540° and 720°. However, the degree of shortening showed no statistically significant difference as rotation increased from 720° to 900°. Decreased modulus of elasticity was observed compared with the graft rotation at 0° in all groups tested, but no statistically significant differences were observed among 540°, 720° and 900°. The maximum tension of the patellar tendon showed no change before rupture, regardless of the degree of rotation.

CONCLUSIONS

Rotating the patellar tendon is an efficient method for shortening a relatively long graft; however, more biomechanical studies are necessary to recommend this technique in clinical practice owing to the resulting decrease in graft stiffness that could compromise knee stability.

The effect of anterior cruciate ligament graft rotation on knee biomechanics

PURPOSE

The purpose of this study was to evaluate the effects on knee biomechanics of rotating the distal end of the bone-patellar tendon graft 90° in anatomic single-bundle (SB) anterior cruciate ligament (ACL) reconstruction with a porcine model.

METHODS

Twenty (n = 20) porcine knees were evaluated using a robotic testing system. Two groups and three knee states were compared: (1) intact ACL, (2) deficient ACL and (3) anatomic SB ACL reconstruction with (a) non-rotated graft or (b) rotated graft (anatomic external fibre rotation). Anterior tibial translation (ATT), internal (IR) and external rotation (ER) and the in situ tissue force were measured under an 89-N anterior tibial (AT) load and 4-N m internal and external tibial torques.

RESULTS

A significant difference from the intact ACL was found in ATT at 60° and 90° of knee flexion for rotated and non-rotated graft reconstructions (p < 0.05). There was a significant difference in the in situ force from the intact ACL with AT loading for rotated and non-rotated graft reconstructions at 60° and 90° of knee flexion (p < 0.05). Under IR loading, the in situ force was significantly different from the intact ACL at 30° and 60° of knee flexion for rotated and non-rotated graft reconstructions (p < 0.05). There were no significant differences in ATT, IR, ER and the in situ force between rotated and non-rotated reconstructions.

CONCLUSION

Graft rotation can be used with anatomic SB ACL reconstruction and not have a deleterious effect on knee anterior and rotational biomechanics. This study has clinical relevance in regard to the use of graft rotation to better reproduce the native ACL fibre orientation in ACL reconstruction.

Kinematic outcomes following ACL reconstruction

Anterior cruciate ligament (ACL) reconstruction aims to restore the translational and rotational motion to the knee joint that is lost after injury. However, despite technical advancements, clinical outcomes are less than ideal, particularly in return to previous activity level. A major issue is the inability to standardize treatment protocols due to variations in materials and approaches used to accomplish ACL reconstruction. These include surgical techniques such as the transtibial and anteromedial portal methods that are currently under use and the wide availability of graft types that will be used to reconstruct the ACL. In addition, concomitant soft tissue injuries to the menisci and capsule are frequently present after ACL injury and, if left unaddressed, can lead to persistent instability even after the ACL has been reconstructed. Advances in the field of biomechanics that help to objectively measure motion of the knee joint may provide more precise data than current subjective clinical measurements. These technologies include extra-articular motion capture systems that measure the movement of the tibia in relation to the femur. With data gathered from these devices, a threshold for satisfactory knee stability may be established in order to correctly identify a successful reconstruction following ACL injury.

Prospective Randomized Study of Objective and Subjective Clinical Results Between Double-Bundle and Single-Bundle Anterior Cruciate Ligament Reconstruction

BACKGROUND

There is controversy as to whether double-bundle anterior cruciate ligament (ACL) reconstruction with hamstring tendon graft (DB-HT) or single-bundle ACL reconstruction with patellar tendon graft (SB-PT) obtains the best clinical outcomes.

PURPOSE

To compare the short-term clinical outcomes of DB-HT with those of rectangular-tunnel SB-PT (RTSB-PT) at 2-year follow-up and to identify the factors that affect subjective knee functional score.

STUDY DESIGN

Randomized controlled trial. Level of evidence, 1.

METHODS

Sixty-three male patients (mean age, 26.1 years) and 87 female patients (mean age, 25.8 years) were included in this study and were randomly distributed to either the DB-HT (n = 76) or RTSB-PT (n = 74) group. Clinical outcomes (knee flexion range of motion [ROM], heel-height difference, side-to-side difference in anterior laxity, rotational laxity, and Tegner activity score) were compared between the DB-HT and RTSB-PT groups, and examination of factors affecting subjective outcomes (Knee Injury and Osteoarthritis and Outcome Score [KOOS] results) was performed by multiple linear regression analysis.

RESULTS

Fourteen patients (9 DB-HT, 5 RTSB-PT) had secondary ACL injury within 2 years after primary ACL reconstruction and were excluded from analysis. In the examination of 136 patients at the 24-month follow-up, there was no significant difference between the 2 groups in clinical or subjective outcomes. The normalized knee extensor strength of the RTSB-PT group showed negative surgical technique effect in the early postoperative phase (P = .005), but there was no significant difference between the 2 groups at the 24-month follow-up (P = .114). There was no significant difference in change of normalized knee flexor strength between the 2 groups (P = .493). Age, sex, body mass index (BMI), and presence of meniscus injury were the factors that affected KOOS subscale scores.

CONCLUSION

In this prospective randomized controlled study, there was no significant difference in the incidence of secondary ACL injury and no difference in objective or subjective outcomes between the DB-HT and RTSB-PT reconstruction at 24-month follow-up. Age, sex, presence of meniscus injury, and BMI affected subjective KOOS subscale scores, while surgical technique did not.

Anatomic ACL reconstruction: rectangular tunnel/bone-patellar tendon-bone or triple-bundle/semitendinosus tendon grafting

Anatomic ACL reconstruction is the reasonable approach to restore stability without loss of motion after ACL tear. To mimic the normal ACL like a ribbon, our preferred procedures is the anatomic rectangular tunnel (ART) technique with a bone-patellar tendon-bone (BTB) graft or the anatomic triple bundle (ATB) procedure with a hamstring (HS) tendon graft. It is important to create tunnel apertures inside the attachment areas to lessen the tunnel widening. To identify the crescent-shaped ACL femoral attachment area, the upper cartilage margin, the posterior cartilage margin and the resident's ridge are used as landmarks. To delineate the C-shaped tibial insertion, medial intercondylar ridge, Parson's knob and anterior horn of the lateral meniscus are helpful. In ART-BTB procedure which is suitable for male patients engaged in contact sports, the parallelepiped tunnels with rectangular apertures are made within the femoral and tibial attachment areas. In ATB-HS technique which is mainly applied to female athletes engaged in non-contact sports including skiing or basketball, 2 femoral and 3 tibial round tunnels are created inside the attachment areas. These techniques make it possible for the grafts to run as the native ACL without impingement to the notch or PCL. After femoral fixation with an interference screw or cortical fixation devices including Endobutton, the graft is pretensioned in situ by repetitive manual pulls at 15-20° of flexion, monitoring the graft tension with tensioners on a tensioning boot installed on the calf. Tibial fixation with pullout sutures is achieved using Double Spike Plate and a screw at the pre-determined amount of tension of 10-20N. While better outcomes with less failure rate are being obtained compared to those in the past, higher graft tear rate remains a problem. Improved preventive training may be required to avoid secondary ACL injuries.

One-stage revision anatomic anterior cruciate ligament reconstruction with rectangular tunnel technique

We developed the anatomic rectangular tunnel anterior cruciate ligament reconstruction (ART ACLR) with a bone–patellar tendon–bone graft to mimic fibre arrangement inside the native ACL via tunnels with smaller apertures. With a 10-mm-wide graft, the cross-sectional area of the tunnels of 50 mm² in ART ACLR is less than that of 79 mm² in a 10-mm round tunnel one. Because tunnel encroachment would be less of a problem, the ART ACLR technique could be most frequently applied to patients after a failed primary ACLR. In this instructional lecture, the indication and technical considerations for ART ACLR as one-stage revision ACLR are described.