Photocurrents from photosystem II in a metal oxide hybrid system: Electron transfer pathways

Photocurrent Generation by Plant Light-Harvesting Complexes is Enhanced by Lipid-Linked Chromophores in a Self-Assembled Lipid Membrane

The light-harvesting pigment-protein complex II (LHCII) from plants can be used as a component for biohybrid photovoltaic devices, acting as a photosensitizer to increase the photocurrent generated when devices are illuminated with sunlight. LHCII is effective at photon absorption in the red and blue regions of the visible spectrum, however, it has low absorption in the green region (550-650 nm). Previous studies have shown that synthetic chromophores can be used to fill this spectral gap and transfer additional energy to LHCII, but it was uncertain whether this would translate into an improved performance for photovoltaics. In this study, we demonstrate amplified photocurrent generation from LHCII under green light illumination by coupling this protein to Texas Red (TR) chromophores that are coassembled into a lipid bilayer deposited onto electrodes. Absorption spectroscopy shows that LHCII and lipid-linked TR are successfully incorporated into lipid membranes and maintained on electrode surfaces. Photocurrent action spectra show that the increased absorption due to TR directly translates into a significant increase of photocurrent output from LHCII. However, the absolute magnitude of the photocurrent appears to be limited by the lipid bilayer acting as an insulator and the TR enhancement effect reaches a maximum due to protein, lipid or substrate-related quenching effects. Future work should be performed to optimize the use of extrinsic chromophores within novel biophotovoltaic devices.

Extremozyme-Based Biosensors for Environmental Pollution Monitoring: Recent Developments

Extremozymes combine high specificity and sensitivity with the ability to withstand extreme operational conditions. This work presents an overview of extremozymes that show potential for environmental monitoring devices and outlines the latest advances in biosensors utilizing these unique molecules. The characteristics of various extremozymes described so far are presented, underlining their stability and operational conditions that make them attractive for biosensing. The biosensor design is discussed based on the detection of photosynthesis-inhibiting herbicides as a case study. Several biosensors for the detection of pesticides, heavy metals, and phenols are presented in more detail to highlight interesting substrate specificity, applications or immobilization methods. Compared to mesophilic enzymes, the integration of extremozymes in biosensors faces additional challenges related to lower availability and high production costs. The use of extremozymes in biosensing does not parallel their success in industrial applications. In recent years, the "collection" of recognition elements was enriched by extremozymes with interesting selectivity and by thermostable chimeras. The perspectives for biosensor development are exciting, considering also the progress in genetic editing for the oriented immobilization of enzymes, efficient folding, and better electron transport. Stability, production costs and immobilization at sensing interfaces must be improved to encourage wider applications of extremozymes in biosensors.

Photosystem II for photoelectrochemical hydrogen production

Water is a primary source of electrons and protons for photosynthetic organisms. For the production of hydrogen through the process of mimicking natural photosynthesis, photosystem II (PSII)-based hybrid photosynthetic systems have been created, both with and without an external voltage source. In the past 30 years, various PSII immobilization techniques have been proposed, and redox polymers have been created for charge transfer from PSII. This review considers the main components of photosynthetic systems, methods for evaluating efficiency, implemented systems and the ways to improve them. Recently, low-overpotential catalysts have emerged that do not contain precious metals, which could ultimately replace Pt and Ir catalysts and make water electrolysis cheaper. However, PSII competes with semiconductor analogues that are less efficient but more stable. Methods originally created for sensors also allow for the use of PSII as a component of a photoanode. To date, charge transfer from PSII remains a bottleneck for such systems. Novel data about action mechanism of artificial electron acceptors in PSII could develop redox polymers to level out mass transport limitations. Hydrogen-producing systems based on PSII have allowed to work out processes in artificial photosynthesis, investigate its features and limitations.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12551-023-01139-5.

Titanium dioxide nanoparticles enhance photocurrent generation of cyanobacteria

Photosynthetic microorganisms such as cyanobacteria can convert photons into electrons, providing ideal eco-friendly materials for converting solar energy into electricity. However, the electrons are hardly transported outside the cyanobacterial cells due to the insulation feature of the cell wall/membrane. Various nanomaterials have been reported to enhance extracellular electron transfer of heterotrophic electroactive microorganisms, but its effect on intact photosynthetic microorganisms remains unclear. In this study, we investigated the effect of six different nanomaterials on the photocurrent generation of cyanobacterium Synechocystis sp. PCC 6803. Among the nanomaterials tested, titanium dioxide (TiO₂) nanoparticles increased the photocurrent generation of Synechocystis sp. PCC 6803 up to four-fold at the optimum concentration of 2 mg/mL. Transmission electron microscopy and scanning electron microscopy showed that TiO₂ bound to cyanobacterial cells and likely penetrated inside of cell membrane. Photochemical analyses for photosystems showed that TiO₂ blocked the electrons transfer downstream in PS I, implying a possible extracellular electron pathway mediated by TiO₂. This study provides an alternative approach for enhancing the photocurrent generation of cyanobacteria, showing the potential of photosynthetic-nanomaterial hybrids.

Effects of Novel Photosynthetic Inhibitor [CuL2]Br2 Complex on Photosystem II Activity in Spinach

The effects of the novel [CuL₂]Br₂ complex (L = bis{4H-1,3,5-triazino [2,1-b]benzothiazole-2-amine,4-(2-imidazole)}copper(II) bromide complex) on the photosystem II (PSII) activity of PSII membranes isolated from spinach were studied. The absence of photosynthetic oxygen evolution by PSII membranes without artificial electron acceptors, but in the presence of [CuL₂]Br₂, has shown that it is not able to act as a PSII electron acceptor. In the presence of artificial electron acceptors, [CuL₂]Br₂ inhibits photosynthetic oxygen evolution. [CuL₂]Br₂ also suppresses the photoinduced changes of the PSII chlorophyll fluorescence yield (F_V) related to the photoreduction of the primary quinone electron acceptor, Q_A. The inhibition of both characteristic PSII reactions depends on [CuL₂]Br₂ concentration. At all studied concentrations of [CuL₂]Br₂, the decrease in the F_M level occurs exclusively due to a decrease in Fv. [CuL₂]Br₂ causes neither changes in the F₀ level nor the retardation of the photoinduced rise in F_M, which characterizes the efficiency of the electron supply from the donor-side components to Q_A through the PSII reaction center (RC). Artificial electron donors (sodium ascorbate, DPC, Mn²⁺) do not cancel the inhibitory effect of [CuL₂]Br₂. The dependences of the inhibitory efficiency of the studied reactions of PSII on [CuL₂]Br₂ complex concentration practically coincide. The inhibition constant Ki is about 16 µM, and logKi is 4.8. As [CuL₂]Br₂ does not change the aromatic amino acids’ intrinsic fluorescence of the PSII protein components, it can be proposed that [CuL₂]Br₂ has no significant effect on the native state of PSII proteins. The results obtained in the present study are compared to the literature data concerning the inhibitory effects of PSII Cu(II) aqua ions and Cu(II)-organic complexes.

The coupled photocycle of phenyl-p-benzoquinone and Light-Harvesting Complex II (LHCII) within the biohybrid system

The combination of trimeric form of the light-harvesting complex II (LHCII₃), a porous graphite electrode (GE), and the application of phenyl-p-benzoquinone (PPBQ), the quinone derivative, allow the construction of a new type of biohybrid photoactive system. The Chl fluorescence decay and voltammetric analyzes revealed that PPBQ impacts LHCII₃ proportionally to accessible quenching sites and that PPBQ forms redox complexes with Chl in both ground and excited states. As a result, photocurrent generation is directly dependent on PPBQ-induced quenching of Chl fluorescence. Since PPBQ also undergoes photoactivation, the action of GE-LHCII₃-PPBQ depends on the mutual coupling of LHCII₃ and PPBQ photocycles. The GE-LHCII₃-PPBQ generates a photocurrent of up to 4.5 µA and exhibits considerable stability during operation. The three-dimensional arrangement of graphite scraps in GE builds an active electrode surface and stabilizes LHCII₃ in its native form in low-density multilayers. The results indicate the future usability of such designed photoactive device.

Photosystem II in bio-photovoltaic devices

Hybrid photoelectrodes containing biological pigment-protein complexes can be used for environmentally friendly solar energy conversion, herbicide detection, and other applications. The total number of scientific publications on hybrid bio-based devices has grown rapidly over the past decades. Particular attention is paid to the integration of the complexes of PSII into photoelectrochemical devices. A notable feature of these complexes from a practical point of view is their ability to obtain electrons from abundant water. The utilization or imitation of the PSII functionality seems promising for all of the following: generating photoelectricity, photo-producing hydrogen, and detecting herbicides. This review summarizes recent advances in the development of hybrid devices based on PSII. In a brief historical review, we also highlighted the use of quinone-type bacterial reaction centers in hybrid devices. These proteins are the first from which the photoelectricity signal was detected. The photocurrent in these first systems, developed in the 70s-80s, was about 1 nA cm-2. In the latest work, by Güzel et al. (2020), a stable current of about 888 μA cm-2 as achieved in a PSII-based solar cell. The present review is inspired by this impressive progress. The advantages, disadvantages, and future endeavors of PSII-inspired bio-photovoltaic devices are also presented.

PsbX maintains efficient electron transport in Photosystem II and reduces susceptibility to high light in Synechocystis sp. PCC 6803

PsbX is a 4.1 kDa intrinsic Photosystem II (PS II) protein, found together with the low-molecular-weight proteins, PsbY and PsbJ, in proximity to cytochrome b559. The function of PsbX is not yet fully characterized but PsbX may play a role in the exchange of the secondary plastoquinone electron acceptor QB with the quinone pool in the thylakoid membrane. To study the role of PsbX, we have constructed a PsbX-lacking strain of Synechocystis sp. PCC 6803. Our studies indicate that the absence of PsbX causes sensitivity to high light and impairs electron transport within PS II. In addition to a change in the QB-binding pocket, PsbX-lacking cells exhibited sensitivity to sodium formate, suggesting altered binding of the bicarbonate ligand to the non-heme iron between the sequential plastoquinone electron acceptors QA and QB. Experiments using 35S-methionine revealed high-light-treated PsbX-lacking cells restore PS II activity during recovery under low light by an increase in the turnover of PS II-associated core proteins. These labeling experiments indicate the recovery after exposure to high light requires both selective removal and replacement of the D1 protein and de novo PS II assembly.

Generation of Photoelectric Responses by Photosystem II Core Complexes in the Presence of Externally Added Cytochrome c

The effect of exogenous cytochrome c (cyt c) on kinetics of photoelectric responses (Δψ) of two types of photosystem II (PSII) core complexes (intact - PSII with active water-oxidizing complex and Mn-depleted complex) reconstituted into liposomes has been investigated by direct electrometric technique. PSII complexes were localized in the proteoliposome membranes with their donor side outward. An additional electrogenic phase was observed in the kinetics of Δψ generation in response to a laser flash besides the main fast (<0.3 µs) electrogenic component due to electron transfer from the redox-active tyrosine Y_Z to the primary quinone acceptor Q_A in the presence of oxidized cyt c (cyt c³⁺) entrapped in the internal space of proteoliposomes with intact PSII complexes. This component with characteristic time τ ≈ 40 µs and relative amplitude of ~10% of the total Δψ was attributed to the vectorial electron transfer from Q_A^- to cyt c³⁺ serving as an external acceptor. An additional electrogenic component with τ ~ 70 µs and a relative amplitude of ~20% of the total Δψ also appeared in the kinetics of Δψ formation, when cyt c²⁺ was added to the suspension of proteoliposomes containing Mn-depleted PSII core complexes. This component was attributed to the electrogenic transfer of an electron from cyt c²⁺ to photooxidized tyrosine Y_Z. These data imply that cyt c³⁺ serves as a very effective exogenous electron acceptor for Q_A^- in the case of intact PSII core complexes, and cyt c²⁺ is an extremely efficient artificial electron donor for Y_Z in the Mn-depleted PSII. The obtained data on the roles of cyt c²⁺ and cyt c³⁺ as an electron donor and acceptor for PSII, respectively, can be used to develop hybrid photoelectrochemical solar energy-converting systems based on photosynthetic pigment-protein complexes.

Photosynthetic Nanomaterial Hybrids for Bioelectricity and Renewable Energy Systems

Harvesting solar energy in the form of electricity from the photosynthesis of plants, algal cells, and bacteria has been researched as the most environment-friendly renewable energy technology in the last decade. The primary challenge has been the engineering of electrochemical interfacing with photosynthetic apparatuses, organelles, or whole cells. However, with the aid of low-dimensional nanomaterials, there have been many advances, including enhanced photon absorption, increased generation of photosynthetic electrons (PEs), and more efficient transfer of PEs to electrodes. These advances have demonstrated the possibility for the technology to advance to a new level. In this article, the fundamentals of photosynthesis are introduced. How PE harvesting systems have improved concerning solar energy absorption, PE production, and PE collection by electrodes is discussed. The review focuses on how different kinds of nanomaterials are applied and function in interfacing with photosynthetic materials for enhanced PE harvesting. Finally, the review analyzes how the performance of PE harvesting and stand-alone systems have evolved so far and its future prospects.

The Interaction of Water-Soluble Nitroxide Radicals with Photosystem II

In this work, we investigated the redox transients of a number of water-soluble spin labels upon their interactions with Photosystem II (PS II) core complexes isolated from spinach leaves. We have found that the reactivity of nitroxide radicals, determined by the rate of their reduction upon illumination of PS II, depends on the chemical structure of radicals and the capability of their coming close to low-potential redox centers of photoactive PS II complexes. An enhanced capability of nitroxide radicals to accept electrons from PS II correlates with their chemical structure. Nitroxide radicals NTI (2,2,5,5-tetramethyl-4-nitromethylene-3-imidazolidine-N-oxyl) and Tacet (4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl-acetate), containing polar groups, appear to be most efficient acceptors of electrons donated by PS II compared to neutral (TEMPOL, 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) or positively charged (Tamine, 4-amino-2,2,6,6-tetramethylpiperidine-l-oxyl) spin labels. We assume that enhanced reactivities of polar nitroxide radicals, NTI and Tacet, are determined (1) by their relatively high redox potentials, providing the possibility to accept electrons from PS II, and (2) by their affinities to the closest binding sites on the surface of PS II in the vicinity of the primary plastoquinone acceptor PQA (12-14 Å) or/and in the intraprotein cavity for the secondary plastoquinone PQB (~ 22 Å).

LPA2 protein is involved in photosystem II assembly in Chlamydomonas reinhardtii

Photosynthetic eukaryotes require the proper assembly of photosystem II (PSII) in order to strip electrons from water and fuel carbon fixation reactions. In Arabidopsis thaliana, one of the PSII subunits (CP43/PsbC) was suggested to be assembled into the PSII complex via its interaction with an auxiliary protein called Low PSII Accumulation 2 (LPA2). However, the original articles describing the role of LPA2 in PSII assembly have been retracted. To investigate the function of LPA2 in the model organism for green algae, Chlamydomonas reinhardtii, we generated knockout lpa2 mutants by using the CRISPR-Cas9 target-specific genome editing system. Biochemical analyses revealed the thylakoidal localization of LPA2 protein in the wild type (WT), whereas lpa2 mutants were characterized by a drastic reduction in the levels of D1, D2, CP47 and CP43 proteins. Consequently, reduced PSII supercomplex accumulation, chlorophyll content per cell, PSII quantum yield and photosynthetic oxygen evolution were measured in the lpa2 mutants, leading to the almost complete impairment of photoautotrophic growth. Pulse-chase experiments demonstrated that the absence of LPA2 protein caused reduced PSII assembly and reduced PSII turnover. Taken together, our data indicate that, in C. reinhardtii, LPA2 is required for PSII assembly and proper function.

Enhanced interfacial electron transfer between thylakoids and RuO2 nanosheets for photosynthetic energy harvesting

The harvesting of photosynthetic electrons (PEs) directly from photosynthetic complexes has been demonstrated over the past decade. However, their limited efficiency and stability have hampered further practical development. For example, despite its importance, the interfacial electron transfer between the photosynthetic apparatus and the electrode has received little attention. In this study, we modified electrodes with RuO₂ nanosheets to enhance the extraction of PEs from thylakoids, and the PE transfer was promoted by proton adsorption and surface polarity characteristics. The adsorbed protons maintained the potential of an electrode more positive, and the surface polarity enhanced thylakoid attachment to the electrode in addition to promoting ensemble docking between the redox species and the electrode. The RuO₂ bioanode exhibited a five times larger current density and a four times larger power density than the Au bioanode. Last, the electric calculators were successfully powered by photosynthetic energy using a RuO₂ bioanode.

Investigation of the spectroelectrochemical behavior of quercetin isolated from Zanthoxylum bungeanum

Flavonoids are common bioactive components in plants. Quercetin is the most abundant flavonoid in the human diet, accounting for more than half of the total daily consumption of flavonoids. In this study, adsorption and electrocatalytic activities of quercetin isolated from Zanthoxylum bungeanum on an electrode was studied via homemade electrodes. An in situ UV-Visible thin-layer spectroelectrochemical method was used to study the electrochemical behavior of quercetin in detail and to explore its electrochemical reaction mechanism. This experiment proves that UV-Vis thin-layer spectroelectrochemistry is a feasible way for studying the electrochemical reaction mechanism of flavonoids in plants.

The Interaction between PsbT and the DE Loop of D1 in Photosystem II Stabilizes the Quinone-Iron Electron Acceptor Complex

The X-ray-derived Photosystem II (PS II) structure from the thermophilic cyanobacterium Thermosynechococcus vulcanus (Protein Data Bank entry 4UB6) indicates Phe239 of the DE loop of the D1 protein forms a hydrophobic interaction with Pro27 and Ile29 at the C-terminus of the 5 kDa PsbT protein found at the monomer-monomer interface of the PS II dimer. To investigate the importance of this interaction, we created the F239A and F239L mutants in Synechocystis sp. PCC 6803 through targeted mutagenesis of the D1:Phe239 residue into either an alanine or a leucine. Under moderate-light conditions, the F239A strain displayed reduced rates of oxygen evolution and impaired rates of fluorescence decay following a single-turnover actinic flash, while the F239L strain behaved like the control; however, under high-light conditions, the F239A and F239L strains grew more slowly than the control. Our results indicate the quinone-iron acceptor complex becomes more accessible to exogenously added electron acceptors in the F239A mutant and a ΔPsbT strain when compared with the control and F239L strains. This led to the hypothesis that the interaction between D1:Phe239 and the PsbT subunit is required to restrict movement of the DE loop of the D1 subunit, and we suggest disruption of this interaction may perturb the binding of bicarbonate to the non-heme iron and contribute to the signal for PS II to undergo repair following photodamage.

Photovoltage generation by photosystem II core complexes immobilized onto a Millipore filter on an indium tin oxide electrode

The light-induced functioning of photosynthetic pigment-protein complex of photosystem II (PSII) is linked to the vectorial translocation of charges across the membrane, which results in the formation of voltage. Direct measurement of the light-induced voltage (∆V) generated by spinach oxygen-evolving PSII core complexes adsorbed onto a Millipore membrane filter (MF) on an indium tin oxide (ITO) electrode under continuous illumination has been performed. PSII was shown to participate in electron transfer from water to the ITO electrode, resulting in ∆V generation. No photovoltage was detected in PSII deprived of the water-oxidizing complex. The maximal and stable photoelectric signal was observed in the presence of disaccharide trehalose and 2,6-dichloro-1,4-benzoquinone, acting as a redox mediator between the primary quinone acceptor Q_A of PSII and electrode surface. Long time preservation of the steady-state photoactivity at room temperature in a simple in design ITO|PSII-MF|ITO system may be related to the retention of water molecules attached to the PSII surface in the presence of trehalose.

Semi-biological approaches to solar-to-chemical conversion

This review provides an overview of the cross-disciplinary field of semi-artificial photosynthesis, which combines strengths of biocatalysis and artificial photosynthesis to develop new concepts and approaches for solar-to-chemical conversion.

Structure-Activity Relationships of Hierarchical Three-Dimensional Electrodes with Photosystem II for Semiartificial Photosynthesis

Semiartificial photosynthesis integrates photosynthetic enzymes with artificial electronics, which is an emerging approach to reroute the natural photoelectrogenetic pathways for sustainable fuel and chemical synthesis. However, the reduced catalytic activity of enzymes in bioelectrodes limits the overall performance and further applications in fuel production. Here, we show new insights into factors that affect the photoelectrogenesis in a model system consisting of photosystem II and three-dimensional indium tin oxide and graphene electrodes. Confocal fluorescence microscopy and in situ surface-sensitive infrared spectroscopy are employed to probe the enzyme distribution and penetration within electrode scaffolds of different structures, which is further correlated with protein film-photoelectrochemistry to establish relationships between the electrode architecture and enzyme activity. We find that the hierarchical structure of electrodes mainly influences the protein loading but not the enzyme activity. Photoactivity is more limited by light intensity and electronic communication at the biointerface. This study provides guidelines for maximizing the performance of semiartificial photosynthesis and also presents a set of methodologies to probe the photoactive biofilms in three-dimensional electrodes.

Oxygenic Photoreactivity in Photosystem II Studied by Rotating Ring Disk Electrochemistry

Protein film photoelectrochemistry has previously been used to monitor the activity of photosystem II, the water-plastoquinone photooxidoreductase, but the mechanistic information attainable from a three-electrode setup has remained limited. Here we introduce the four-electrode rotating ring disk electrode technique for quantifying light-driven reaction kinetics and mechanistic pathways in real time at the enzyme-electrode interface. This setup allows us to study photochemical H₂O oxidation in photosystem II and to gain an in-depth understanding of pathways that generate reactive oxygen species. The results show that photosystem II reacts with O₂ through two main pathways that both involve a superoxide intermediate to produce H₂O₂. The first pathway involves the established chlorophyll triplet-mediated formation of singlet oxygen, which is followed by its reduction to superoxide at the electrode surface. The second pathway is specific for the enzyme/electrode interface: an exposed antenna chlorophyll is sufficiently close to the electrode for rapid injection of an electron to form a highly reducing chlorophyll anion, which reacts with O₂ in solution to produce O₂^•-. Incomplete H₂O oxidation does not significantly contribute to reactive oxygen formation in our conditions. The rotating ring disk electrode technique allows the chemical reactivity of photosystem II to be studied electrochemically and opens several avenues for future investigation.

Interfacing Photosynthetic Membrane Protein with Mesoporous WO3 Photoelectrode for Solar Water Oxidation

Photosynthetic biocatalysts are emerging as a new class of materials, with their sophisticated and intricate structure, which promise improved remarkable quantum efficiency compared to conventional inorganic materials in artificial photosynthesis. To break the limitation of efficiency, the construction of bioconjugated photo-electrochemical conversion devices has garnered substantial interest and stood at the frontier of the multidisciplinary research between biology and chemistry. Herein, a biohybrid photoanode of a photosynthetic membrane protein (Photosystem II (PS II)), extracted from fresh spinach entrapped on mesoporous WO₃ film, is fabricated on fluorine-doped tin oxide. The PS II membrane proteins are observed to communicate with the WO₃ electrode in the absence of any soluble redox mediators and sacrificial reagents under the visible light of the solar spectrum, even to 700 nm. The biohybrid electrode undergoes electron transfer and generates a significantly enhanced photocurrent compared to previously reported PS II-based photoanodes with carbon nanostructures or other semiconductor substrates for solar water oxidation. The maximum incident photon-to-current conversion efficiency reaches 15.24% at 400 nm in the visible light region. This work provides some insights and possibilities into the efficient assembly of a future solar energy conversion system based on visible-light-responsive semiconductors and photosynthetic proteins.

On the performance of a photosystem II reaction centre-based photocell

The photosystem II reaction centre is the photosynthetic complex responsible for oxygen production on Earth. Its water splitting function is particularly favoured by the formation of a stable charge separated state via a pathway that starts at an accessory chlorophyll. Here we envision a photovoltaic device that places one of these complexes between electrodes and investigate how the mean current and its fluctuations depend on the microscopic interactions underlying charge separation in the pathway considered. Our results indicate that coupling to well resolved vibrational modes does not necessarily offer an advantage in terms of power output but can lead to photo-currents with suppressed noise levels characterizing a multi-step ordered transport process. Besides giving insight into the suitability of these complexes for molecular-scale photovoltaics, our work suggests a new possible biological function for the vibrational environment of photosynthetic reaction centres, namely, to reduce the intrinsic current noise for regulatory processes.

Electrocatalytic Mechanism Involving Michaelis-Menten Kinetics at the Preparative Scale: Theory and Applicability to Photocurrents from a Photosynthetic Algae Suspension With Quinones

In the past years, many strategies have been implemented to benefit from oxygenic photosynthesis to harvest photosynthetic electrons and produce a significant photocurrent. Therefore, electrochemical tools were considered and have globally relied on the electron transfer(s) between the photosynthetic chain and a collecting electrode. In this context, we recently reported the implementation of an electrochemical set-up at the preparative scale to produce photocurrents from a Chlamydomonas reinhardtii algae suspension with an appropriate mediator (2,6-DCBQ) and a carbon gauze as the working electrode. In the present work, we wish to describe a mathematical modeling of the recorded photocurrents to better understand the effects of the experimental conditions on the photosynthetic extraction of electrons. In that way, we established a general model of an electrocatalytic mechanism at the preparative scale (that is, assuming a homogenous bulk solution at any time and a constant diffusion layer, both assumptions being valid under forced convection) in which the chemical step involves a Michaelis-Menten-like behaviour. Dependences of transient and steady-state corresponding currents were analysed as a function of different parameters by means of zone diagrams. This model was tested to our experimental data related to photosynthesis. The corresponding results suggest that competitive pathways beyond photosynthetic harvesting alone should be taken into account.