The c-di-GMP recognition mechanism of the PilZ domain of bacterial cellulose synthase subunit A

Insertion of a Divergent GAF-like Domain Defines a Novel Family of YcgR Homologues That Bind c-di-GMP in Leptospirales

The Leptospiraceae family, which includes the genera Leptospira, Leptonema, and Turneriella, is an ecologically diverse group that includes saprophytic strains from soil and water as well as important pathogenic strains. Adaptation to these multiple environments relies strongly on signal transduction to adjust their morphology, motility, and metabolism to the changing environmental conditions. Members of the genus Leptospira distinguish themselves among spirochetes for having an elevated number of signal transduction genes. In this study, we describe a novel signal transduction protein that has gained multiple paralogues in the Leptospiraceae. These proteins are members of the YcgR/DgrA/MotI family, whose orthologs in several bacterial lineages have been shown to regulate the flagellar motor upon binding to c-di-GMP through their N-terminal PilZ domain. Unlike previously described versions of YcgR, the spirochetal proteins are characterized by the insertion of a divergent GAF domain within their N-terminal PilZ domain. We show that one member of this protein family from Leptospira interrogans is still a monomeric c-di-GMP binding protein and that these novel YcgR-like proteins have mostly replaced other members of the YcgR family in Leptospiraceae. Marked divergence among the paralogs suggests this family's expansion was accompanied by neofunctionalization, with the likely emergence of novel interactions in the signal transduction network controlling the flagellum rotor and other processes affected by changes in levels of c-di-GMP.

Tandem GGDEF-EAL Domain Proteins Pleiotropically Modulate c-di-GMP Metabolism Enrolled in Bacterial Cellulose Biosynthesis

Cyclic diguanosine monophosphate (c-di-GMP) is a crucial secondary messenger that regulates bacterial cellulose (BC) synthesis. It is synthesized by diguanylate cyclase (DGC) containing a Gly-Gly-Asp/Glu-Glu-Phe (GGDEF) domain and degraded by phosphodiesterase (PDE) with a Glu-Ala-Leu (EAL) domain. In this work, a systematic analysis of ten GGDEF-EAL tandem domain proteins from Komagataeibacter xylinus CGMCC 2955 assessed their c-di-GMP metabolic functions and effects on BC titer and structure. Of these, five proteins exhibited DGC activity, and five exhibited PDE activity in vitro. GE03 was identified as a bifunctional protein. Most mutant strains deficient in GGDEF-EAL protein showed changes in BC metabolism, motility, and c-di-GMP levels. The combined knockout of identified PDE proteins increased the BC titer by 48.1% compared to the wild type. Overall, our findings advance our understanding of c-di-GMP signaling and its role in BC synthesis, introducing novel concepts and effective strategies for enhancing industrial BC production.

Bacterial Cellulose-Based Blends and Composites: Versatile Biomaterials for Tissue Engineering Applications

Cellulose of bacterial origin, known as bacterial cellulose (BC), is one of the most versatile biomaterials that has a huge potential in tissue engineering due to its favourable mechanical properties, high hydrophilicity, crystallinity, and purity. Additional properties such as porous nano-fibrillar 3D structure and a high degree of polymerisation of BC mimic the properties of the native extracellular matrix (ECM), making it an excellent material for the fabrication of composite scaffolds suitable for cell growth and tissue development. Recently, the fabrication of BC-based scaffolds, including composites and blends with nanomaterials, and other biocompatible polymers has received particular attention owing to their desirable properties for tissue engineering. These have proven to be promising advanced materials in hard and soft tissue engineering. This review presents the latest state-of-the-art modified/functionalised BC-based composites and blends as advanced materials in tissue engineering. Their applicability as an ideal biomaterial in targeted tissue repair including bone, cartilage, vascular, skin, nerve, and cardiac tissue has been discussed. Additionally, this review briefly summarises the latest updates on the production strategies and characterisation of BC and its composites and blends. Finally, the challenges in the future development and the direction of future research are also discussed.

Structural snapshot of a glycoside hydrolase family 8 endo-β-1,4-glucanase capturing the state after cleavage of the scissile bond

Bacterial cellulose (BC), which is produced by bacteria, is a biodegradable and biocompatible natural resource. Because of its remarkable physicochemical properties, BC has attracted attention for the development and manufacture of biomedical and industrial materials. In the BC production system, the enzyme endo-β-1,4-glucanase, which belongs to glycoside hydrolase family 8 (GH8), acts as a cleaner by trimming disordered cellulose fibers to produce high-quality BC. Understanding the molecular mechanism of the endo-β-1,4-glucanase would help in developing a reasonable biosynthesis of BC. Nevertheless, all of the steps in the reaction of this endo-β-1,4-glucanase are not clear. This study confirms the BC hydrolytic activity of the endo-β-1,4-glucanase from the BC-producing bacterium Enterobacter sp. CJF-002 (EbBcsZ) and reports crystal structures of EbBcsZ. Unlike in previously reported GH8 endo-β-1,4-glucanase structures, here the base catalyst was mutated (D242A) and the structure of this mutant bound to cellooligosaccharide [EbBcsZ(D242A)CPT] was analyzed. The EbBcsZ(D242A)CPT structure showed two cellooligosaccharides individually bound to the plus and minus subsites of EbBcsZ. The glucosyl unit in subsite −1 presented a distorted 5 S 1 conformation, a novel snapshot of a state immediately after scissile-bond cleavage. In combination with previous studies, the reaction process of endo-β-1,4-glucanase is described and the β-1,4-glucan-trimming mechanism of EbBcsZ is proposed. The EbBcsZ(D242A)CPT structure also showed an additional β-1,4-glucan binding site on the EbBcsZ surface, which may help to accept the substrate.

Machine learning approaches to predict the Plant-associated phenotype of Xanthomonas strains

BACKGROUND

The genus Xanthomonas has long been considered to consist predominantly of plant pathogens, but over the last decade there has been an increasing number of reports on non-pathogenic and endophytic members. As Xanthomonas species are prevalent pathogens on a wide variety of important crops around the world, there is a need to distinguish between these plant-associated phenotypes. To date a large number of Xanthomonas genomes have been sequenced, which enables the application of machine learning (ML) approaches on the genome content to predict this phenotype. Until now such approaches to the pathogenomics of Xanthomonas strains have been hampered by the fragmentation of information regarding pathogenicity of individual strains over many studies. Unification of this information into a single resource was therefore considered to be an essential step.

RESULTS

Mining of 39 papers considering both plant-associated phenotypes, allowed for a phenotypic classification of 578 Xanthomonas strains. For 65 plant-pathogenic and 53 non-pathogenic strains the corresponding genomes were available and de novo annotated for the presence of Pfam protein domains used as features to train and compare three ML classification algorithms; CART, Lasso and Random Forest.

CONCLUSION

The literature resource in combination with recursive feature extraction used in the ML classification algorithms provided further insights into the virulence enabling factors, but also highlighted domains linked to traits not present in pathogenic strains.

Genetic modification for enhancing bacterial cellulose production and its applications

Bacterial cellulose (BC) is higher in demand due to its excellent properties which is attributed to its purity and nano size. Komagataeibacter xylinum is a model organism where BC production has been studied in detail because of its higher cellulose production capacity. BC production mechanism shows involvement of a series of sequential reactions with enzymes for biosynthesis of cellulose. It is necessary to know the mechanism to understand the involvement of regulatory proteins which could be the probable targets for genetic modification to enhance or regulate yield of BC and to alter BC properties as well. For the industrial production of BC, controlled synthesis is desired so as to save energy, hence genetic manipulation opens up avenues for upregulating or controlling the cellulose synthesis in the bacterium by targeting genes involved in cellulose biosynthesis. In this review article genetic modification has been presented as a tool to introduce desired changes at genetic level resulting in improved yield or properties. There has been a lack of studies on genetic modification for BC production due to limited availability of information on whole genome and genetic toolkits; however, in last few years, the number of studies has been increased on this aspect as whole genome sequencing of several Komagataeibacter strains are being done. In this review article, we have presented the mechanisms and the targets for genetic modifications in order to achieve desired changes in the BC production titer as well as its characteristics.

Systematic Understanding of Recent Developments in Bacterial Cellulose Biosynthesis at Genetic, Bioprocess and Product Levels

Engineering biological processes has become a standard approach to produce various commercially valuable chemicals, therapeutics, and biomaterials. Among these products, bacterial cellulose represents major advances to biomedical and healthcare applications. In comparison to properties of plant cellulose, bacterial cellulose (BC) shows distinctive characteristics such as a high purity, high water retention, and biocompatibility. However, low product yield and extensive cultivation times have been the main challenges in the large-scale production of BC. For decades, studies focused on optimization of cellulose production through modification of culturing strategies and conditions. With an increasing demand for BC, researchers are now exploring to improve BC production and functionality at different categories: genetic, bioprocess, and product levels as well as model driven approaches targeting each of these categories. This comprehensive review discusses the progress in BC platforms categorizing the most recent advancements under different research focuses and provides systematic understanding of the progress in BC biosynthesis. The aim of this review is to present the potential of ‘modern genetic engineering tools’ and ‘model-driven approaches’ on improving the yield of BC, altering the properties, and adding new functionality. We also provide insights for the future perspectives and potential approaches to promote BC use in biomedical applications.

Cyclic di-GMP signaling controlling the free-living lifestyle of alpha-proteobacterial rhizobia

Cyclic-di-GMP (c-di-GMP) is a ubiquitous bacterial second messenger which has been associated with a motile to sessile lifestyle switch in many bacteria. Here, we review recent insights into c-di-GMP regulated processes related to environmental adaptations in alphaproteobacterial rhizobia, which are diazotrophic bacteria capable of fixing nitrogen in symbiosis with their leguminous host plants. The review centers on Sinorhizobium meliloti, which in the recent years was intensively studied for its c-di-GMP regulatory network.

Modifying the Cyanobacterial Metabolism as a Key to Efficient Biopolymer Production in Photosynthetic Microorganisms

Cyanobacteria are photoautotrophic bacteria commonly found in the natural environment. Due to the ecological benefits associated with the assimilation of carbon dioxide from the atmosphere and utilization of light energy, they are attractive hosts in a growing number of biotechnological processes. Biopolymer production is arguably one of the most critical areas where the transition from fossil-derived chemistry to renewable chemistry is needed. Cyanobacteria can produce several polymeric compounds with high applicability such as glycogen, polyhydroxyalkanoates, or extracellular polymeric substances. These important biopolymers are synthesized using precursors derived from central carbon metabolism, including the tricarboxylic acid cycle. Due to their unique metabolic properties, i.e., light harvesting and carbon fixation, the molecular and genetic aspects of polymer biosynthesis and their relationship with central carbon metabolism are somehow different from those found in heterotrophic microorganisms. A greater understanding of the processes involved in cyanobacterial metabolism is still required to produce these molecules more efficiently. This review presents the current state of the art in the engineering of cyanobacterial metabolism for the efficient production of these biopolymers.

Towards control of cellulose biosynthesis by Komagataeibacter using systems-level and strain engineering strategies: current progress and perspectives

The strains of the Komagataeibacter genus have been shown to be the most efficient bacterial nanocellulose producers. Although exploited for many decades, the studies of these species focused mainly on the optimisation of cellulose synthesis process through modification of culturing conditions in the industrially relevant settings. Molecular physiology of Komagataeibacter was poorly understood and only a few studies explored genetic engineering as a strategy for strain improvement. Only since recently the systemic information of the Komagataeibacter species has been accumulating in the form of omics datasets representing sequenced genomes, transcriptomes, proteomes and metabolomes. Genetic analyses of the mutants generated in the untargeted strain modification studies have drawn attention to other important proteins, beyond those of the core catalytic machinery of the cellulose synthase complex. Recently, modern molecular and synthetic biology tools have been developed which showed the potential for improving targeted strain engineering. Taking the advantage of the gathered knowledge should allow for better understanding of the genotype–phenotype relationship which is necessary for robust modelling of metabolism as well as selection and testing of new molecular engineering targets. In this review, we discuss the current progress in the area of Komagataeibacter systems biology and its impact on the research aimed at scaled-up cellulose synthesis as well as BNC functionalisation.

Key points • The accumulated omics datasets advanced the systemic understanding of Komagataeibacter physiology at the molecular level. • Untargeted and targeted strain modification approaches have been applied to improve nanocellulose yield and properties. • The development of modern molecular and synthetic biology tools presents a potential for enhancing targeted strain engineering. • The accumulating omic information should improve modelling of Komagataeibacter’s metabolism as well as selection and testing of new molecular engineering targets.

Comparative genomics analysis of c-di-GMP metabolism and regulation in Microcystis aeruginosa

BACKGROUND

Cyanobacteria are of special concern because they proliferate in eutrophic water bodies worldwide and affect water quality. As an ancient photosynthetic microorganism, cyanobacteria can survive in ecologically diverse habitats because of their capacity to rapidly respond to environmental changes through a web of complex signaling networks, including using second messengers to regulate physiology or metabolism. A ubiquitous second messenger, bis-(3',5')-cyclic-dimeric-guanosine monophosphate (c-di-GMP), has been found to regulate essential behaviors in a few cyanobacteria but not Microcystis, which are the most dominant species in cyanobacterial blooms. In this study, comparative genomics analysis was performed to explore the genomic basis of c-di-GMP signaling in Microcystis aeruginosa.

RESULTS

Proteins involved in c-di-GMP metabolism and regulation, such as diguanylate cyclases, phosphodiesterases, and PilZ-containing proteins, were encoded in M. aeruginosa genomes. However, the number of identified protein domains involved in c-di-GMP signaling was not proportional to the size of M. aeruginosa genomes (4.97 Mb in average). Pan-genome analysis showed that genes involved in c-di-GMP metabolism and regulation are conservative in M. aeruginosa strains. Phylogenetic analysis showed good congruence between the two types of phylogenetic trees based on 31 highly conserved protein-coding genes and sensor domain-coding genes. Propensity for gene loss analysis revealed that most of genes involved in c-di-GMP signaling are stable in M. aeruginosa strains. Moreover, bioinformatics and structure analysis of c-di-GMP signal-related GGDEF and EAL domains revealed that they all possess essential conserved amino acid residues that bind the substrate. In addition, it was also found that all selected M. aeruginosa genomes encode PilZ domain containing proteins.

CONCLUSIONS

Comparative genomics analysis of c-di-GMP metabolism and regulation in M. aeruginosa strains helped elucidating the genetic basis of c-di-GMP signaling pathways in M. aeruginosa. Knowledge of c-di-GMP metabolism and relevant signal regulatory processes in cyanobacteria can enhance our understanding of their adaptability to various environments and bloom-forming mechanism.

Structural Conservation and Diversity of PilZ-Related Domains

The widespread bacterial second messenger cyclic diguanylate (c-di-GMP) regulates a variety of processes, including protein secretion, motility, cell development, and biofilm formation. c-di-GMP-dependent responses are often mediated by its binding to the cytoplasmic receptors that contain the PilZ domain. Here, we present comparative structural and sequence analysis of various PilZ-related domains and describe three principal types of them: (i) the canonical PilZ domain, whose structure includes a six-stranded beta-barrel and a C-terminal alpha helix, (ii) an atypical PilZ domain that contains two extra alpha helices and forms stable tetramers, and (iii) divergent PilZ-related domains, which include the eponymous PilZ protein and PilZN (YcgR_N) and PilZNR (YcgR_2) domains. We refine the second c-di-GMP binding motif of PilZ as [D/N]hSXXG and show that the hydrophobic residue h of this motif interacts with a cluster of conserved hydrophobic residues, helping maintain the PilZ domain fold. We describe several novel PilZN-type domains that are fused to the canonical PilZ domains in specific taxa, such as spirochetes, actinobacteria, aquificae, cellulose-degrading clostridia, and deltaproteobacteria. We propose that the evolution of the three major groups of PilZ domains included (i) fusion of pilZ with other genes, which produced Alg44, cellulose synthase, and other multidomain proteins; (ii) insertion of an ∼200-bp fragment, which resulted in the formation of tetramer-forming PilZ proteins; and (iii) tandem duplication of pilZ genes, which led to the formation of PilZ dimers and YcgR-like proteins.IMPORTANCE c-di-GMP is a ubiquitous bacterial second messenger that regulates motility, biofilm formation, and virulence of many bacterial pathogens. The PilZ domain is a widespread c-di-GMP receptor that binds c-di-GMP through its RXXXR and [D/N]hSXXG motifs; some PilZ domains lack these motifs and are unable to bind c-di-GMP. We used structural and sequence analysis to assess the diversity of PilZ-related domains and define their common features. We show that the hydrophobic residue h in the second position of the second motif is highly conserved; it may serve as a readout for c-di-GMP binding. We describe three principal classes of PilZ-related domains, canonical, tetramer-forming, and divergent PilZ domains, and propose the evolutionary pathways that led to the emergence of these PilZ types.

Effect of ethanol supplementation on the transcriptional landscape of bionanocellulose producer Komagataeibacter xylinus E25

Ethanol exerts a strong positive effect on the cellulose yields from the widely exploited microbial producers of the Komagataeibacter genus. Ethanol is postulated to provide an alternative energy source, enabling effective use of glucose for cellulose biosynthesis rather than for energy acquisition. In this paper, we investigate the effect of ethanol supplementation on the global gene expression profile of Komagataeibacter xylinus E25 using RNA sequencing technology (RNA-seq). We demonstrate that when ethanol is present in the culture medium, glucose metabolism is directed towards cellulose production due to the induction of genes related to UDP-glucose formation and the repression of genes involved in glycolysis and acetan biosynthesis. Transcriptional changes in the pathways of cellulose biosynthesis and c-di-GMP metabolism are also described. The transcript level profiles suggest that Schramm-Hestrin medium supplemented with ethanol promotes bacterial growth by inducing protein biosynthesis and iron uptake. We observed downregulation of genes encoding transposases of the IS110 family which may provide one line of evidence explaining the positive effect of ethanol supplementation on the genotypic stability of K. xylinus E25. The results of this study increase knowledge and understanding of the regulatory effects imposed by ethanol on cellulose biosynthesis, providing new opportunities for directed strain improvement, scaled-up bionanocellulose production, and wider industrial exploitation of the Komagataeibacter species as bacterial cellulose producers.

Comparative genomics of the Komagataeibacter strains-Efficient bionanocellulose producers

Komagataeibacter species are well-recognized bionanocellulose (BNC) producers. This bacterial genus, formerly assigned to Gluconacetobacter, is known for its phenotypic diversity manifested by strain-dependent carbon source preference, BNC production rate, pellicle structure, and strain stability. Here, we performed a comparative study of nineteen Komagataeibacter genomes, three of which were newly contributed in this work. We defined the core genome of the genus, clarified phylogenetic relationships among strains, and provided genetic evidence for the distinction between the two major clades, the K. xylinus and the K. hansenii. We found genomic traits, which likely contribute to the phenotypic diversity between the Komagataeibacter strains. These features include genome flexibility, carbohydrate uptake and regulation of its metabolism, exopolysaccharides synthesis, and the c-di-GMP signaling network. In addition, this work provides a comprehensive functional annotation of carbohydrate metabolism pathways, such as those related to glucose, glycerol, acetan, levan, and cellulose. Findings of this multi-genomic study expand understanding of the genetic variation within the Komagataeibacter genus and facilitate exploiting of its full potential for bionanocellulose production at the industrial scale.

LotS/LotR/Clp, a novel signal pathway responding to temperature, modulating protease expression via c-di-GMP mediated manner in Stenotrophomonas maltophilia FF11

Stenotrophomonas maltophilia as one of increasing food spoilage bacteria and fish pathogens has become a threat to aquiculture industry. A major factor contributing to the success of bacterium is its outstanding ability to secrete protease at low temperatures. Here, a cAMP receptor like protein (Clp) shows a positive regulation on this protease, named S. maltophilia temperature-response protease (SmtP). Interestingly, a two-component system, comprising of LotS sensor and LotR regulator, for low-temperature response is also confirmed to modulate SmtP expression with similar effect to Clp. Evidence is presented that LotS/LotR modulates smtP (coding SmtP) expression via Clp: clp promoter activity was reduced significantly at low temperatures and protease activity was partially restored by Clp overexpressed in lotS or lotR deletion strain. Furthermore, as a Clp negative effector, the binding ability of c-di-GMP with Clp is not impacted by temperature. c-di-GMP level was increased in S. maltophilia growing at high temperature, but not exhibited significantly in lotR deleted strain, these indicate that LotR is required for temperature modulating c-di-GMP level, although the synthesis or degradation activity of c-di-GMP by LotR was not detected. These findings suggest that LotS/LotR/Clp play an important role in responding to temperature stimuli via c-di-GMP mediated manner.

Structural analyses unravel the molecular mechanism of cyclic di-GMP regulation of bacterial chemotaxis via a PilZ adaptor protein

The bacterial second messenger cyclic di-GMP (c-di-GMP) has emerged as a prominent mediator of bacterial physiology, motility, and pathogenicity. c-di-GMP often regulates the function of its protein targets through a unique mechanism that involves a discrete PilZ adaptor protein. However, the molecular mechanism for PilZ protein-mediated protein regulation is unclear. Here, we present the structure of the PilZ adaptor protein MapZ cocrystallized in complex with c-di-GMP and its protein target CheR1, a chemotaxis-regulating methyltransferase in Pseudomonas aeruginosa This cocrystal structure, together with the structure of free CheR1, revealed that the binding of c-di-GMP induces dramatic structural changes in MapZ that are crucial for CheR1 binding. Importantly, we found that restructuring and repositioning of two C-terminal helices enable MapZ to disrupt the CheR1 active site by dislodging a structural domain. The crystallographic observations are reinforced by protein-protein binding and single cell-based flagellar motor switching analyses. Our studies further suggest that the regulation of chemotaxis by c-di-GMP through MapZ orthologs/homologs is widespread in proteobacteria and that the use of allosterically regulated C-terminal motifs could be a common mechanism for PilZ adaptor proteins. Together, the findings provide detailed structural insights into how c-di-GMP controls the activity of an enzyme target indirectly through a PilZ adaptor protein.

A novel c-di-GMP binding domain in glycosyltransferase BgsA is responsible for the synthesis of a mixed-linkage β-glucan

BgsA is the glycosyltransferase (GT) involved in the synthesis of a linear mixed-linkage β-glucan (MLG), a recently described exopolysaccharide activated by c-di-GMP in Sinorhizobium meliloti and other Rhizobiales. Although BgsA displays sequence and structural homology with bacterial cellulose synthases (CS), it does not contain any predictable c-di-GMP binding domain. In this work we demonstrate that the cytoplasmic C-terminal domain of BgsA (C-BgsA) binds c-di-GMP with both high affinity (K_D = 0.23 μM) and specificity. C-BgsA is structurally different to the otherwise equivalent cytoplasmic C-terminal domain of CS, and does not contain PilZ motifs for c-di-GMP recognition. A combination of random and site-directed mutagenesis with surface plasmon resonance (SPR) allowed identification of the C-BgsA residues which are important not only for c-di-GMP binding, but also for BgsA GT activity. The results suggest that the C-BgsA domain is important for both, c-di-GMP binding and GT activity of BgsA. In contrast to bacterial CS where c-di-GMP has been proposed as a derepressor of GT activity, we hypothesize that the C-terminal domain of BgsA plays an active role in BgsA GT activity upon binding c-di-GMP.

Cyclic-di-GMP binding induces structural rearrangements in the PlzA and PlzC proteins of the Lyme disease and relapsing fever spirochetes: a possible switch mechanism for c-di-GMP-mediated effector functions

The c-di-GMP network of Borrelia burgdorferi, a causative agent of Lyme disease, consists of Rrp1, a diguanylate cyclase/response regulator; Hpk1, a histidine kinase; PdeA and PdeB, c-di-GMP phosphodiesterases; and PlzA, a PilZ domain c-di-GMP receptor. Borrelia hermsii, a causative agent of tick-borne relapsing fever, possesses a putative c-di-GMP regulatory network that is uncharacterized. While B. burgdorferi requires c-di-GMP to survive within ticks, the associated effector mechanisms are poorly defined. Using site-directed mutagenesis, size exclusion chromatography, isothermal titration calorimetry and fluorescence resonance energy transfer, we investigate the interaction of c-di-GMP with the Borrelia PilZ domain-containing Plz proteins: B. burgdorferi PlzA and B. hermsii PlzC. The Plz proteins were determined to be monomeric in their apo and holo forms and to bind c-di-GMP with high affinity with a 1:1 stoichiometry. C-di-GMP binding induced structural rearrangements in PlzA and PlzC. C-di-GMP binding proved to be dependent on positive charge at R₁₄₅ of the PilZ domain motif, R₁₄₅xxxR. Comparative sequence analyses led to the identification of Borrelia consensus sequences for the PilZ domain signature motifs. This study provides insight into c-di-GMP:Plz receptor interaction and identifies a possible switch mechanism that may regulate Plz protein effector functions.

Structures of the activator of K. pneumonia biofilm formation, MrkH, indicates PilZ domains involved in c-di-GMP and DNA binding

The pathogenesis of Klebsiella pneumonia is linked to the bacteria's ability to form biofilms. Mannose-resistant Klebsiella-like (Mrk) hemagglutinins are critical for K pneumonia biofilm development, and the expression of the genes encoding these proteins is activated by a 3',5'-cyclic diguanylic acid (c-di-GMP)-regulated transcription factor, MrkH. To gain insight into MrkH function, we performed structural and biochemical analyses. Data revealed MrkH to be a monomer with a two-domain architecture consisting of a PilZ C-domain connected to an N domain that unexpectedly also harbors a PilZ-like fold. Comparison of apo- and c-di-GMP-bound MrkH structures reveals a large 138° interdomain rotation that is induced by binding an intercalated c-di-GMP dimer. c-di-GMP interacts with PilZ C-domain motifs 1 and 2 (RxxxR and D/NxSxxG) and a newly described c-di-GMP-binding motif in the MrkH N domain. Strikingly, these c-di-GMP-binding motifs also stabilize an open state conformation in apo MrkH via contacts from the PilZ motif 1 to residues in the C-domain motif 2 and the c-di-GMP-binding N-domain motif. Use of the same regions in apo structure stabilization and c-di-GMP interaction allows distinction between the states. Indeed, domain reorientation by c-di-GMP complexation with MrkH, which leads to a highly compacted structure, suggests a mechanism by which the protein is activated to bind DNA. To our knowledge, MrkH represents the first instance of specific DNA binding mediated by PilZ domains. The MrkH structures also pave the way for the rational design of inhibitors that target K pneumonia biofilm formation.

Diversity of Cyclic Di-GMP-Binding Proteins and Mechanisms

Cyclic di-GMP (c-di-GMP) synthetases and hydrolases (GGDEF, EAL, and HD-GYP domains) can be readily identified in bacterial genome sequences by using standard bioinformatic tools. In contrast, identification of c-di-GMP receptors remains a difficult task, and the current list of experimentally characterized c-di-GMP-binding proteins is likely incomplete. Several classes of c-di-GMP-binding proteins have been structurally characterized; for some others, the binding sites have been identified; and for several potential c-di-GMP receptors, the binding sites remain to be determined. We present here a comparative structural analysis of c-di-GMP-protein complexes that aims to discern the common themes in the binding mechanisms that allow c-di-GMP receptors to bind it with (sub)micromolar affinities despite the 1,000-fold excess of GTP. The available structures show that most receptors use their Arg and Asp/Glu residues to bind c-di-GMP monomers, dimers, or tetramers with stacked guanine bases. The only exception is the EAL domains that bind c-di-GMP monomers in an extended conformation. We show that in c-di-GMP-binding signature motifs, Arg residues bind to the O-6 and N-7 atoms at the Hoogsteen edge of the guanine base, while Asp/Glu residues bind the N-1 and N-2 atoms at its Watson-Crick edge. In addition, Arg residues participate in stacking interactions with the guanine bases of c-di-GMP and the aromatic rings of Tyr and Phe residues. This may account for the presence of Arg residues in the active sites of every receptor protein that binds stacked c-di-GMP. We also discuss the implications of these structural data for the improved understanding of the c-di-GMP signaling mechanisms.

Exploiting the commons: cyclic diguanylate regulation of bacterial exopolysaccharide production

Nowadays, there is increasing interest for bacterial polysaccharides in a wide variety of industrial sectors. This is due to their chemical and reological properties, and also the possibility to be obtained by fermentation processes. Biosynthesis of a growing number of exopolysaccharides (EPS) has been reported to be regulated by the ubiquitous second messenger c-di-GMP in a limited number of bacterial species. Since most bacteria are yet unexplored, it is likely that an unsuspected number and variety of EPS structures activated by c-di-GMP await to be uncovered. In the search of new EPS, manipulation of bacterial c-di-GMP metabolism can be combined with high throughput approaches for screening of large collections of bacteria. In addition, c-di-GMP activation of EPS production and promotion of cell aggregation may have direct applications in environmental industries related with biofuel production or wastewater treatments.

The Phytohormone Ethylene Enhances Cellulose Production, Regulates CRP/FNRKx Transcription and Causes Differential Gene Expression within the Bacterial Cellulose Synthesis Operon of Komagataeibacter (Gluconacetobacter) xylinus ATCC 53582

Komagataeibacter (formerly Gluconacetobacter) xylinus ATCC 53582 is a plant-associated model organism for bacterial cellulose (BC) biosynthesis. This bacterium inhabits the carposphere where it interacts with fruit through the bi-directional transfer of phytohormones. The majority of research regarding K. xylinus has been focused on identifying and characterizing structural and regulatory factors that control BC biosynthesis, but its ecophysiology has been generally overlooked. Ethylene is a phytohormone that regulates plant development in a variety of ways, but is most commonly known for its positive role on fruit ripening. In this study, we utilized ethephon (2-chloroethylphosphonic acid) to produce in situ ethylene to investigate the effects of this phytohormone on BC production and the expression of genes known to be involved in K. xylinus BC biosynthesis (bcsA, bcsB, bcsC, bcsD, cmcAx, ccpAx and bglAx). Using pellicle assays and reverse transcription quantitative polymerase chain reaction (RT-qPCR), we demonstrate that ethephon-derived ethylene enhances BC directly in K. xylinus by up-regulating the expression of bcsA and bcsB, and indirectly though the up-regulation of cmcAx, ccpAx, and bglAx. We confirm that IAA directly decreases BC biosynthesis by showing that IAA down-regulates bcsA expression. Similarly, we confirm that ABA indirectly influences BC biosynthesis by showing it does not affect the expression of bcs operon genes. In addition, we are the first to report the ethylene and indole-3-acetic acid (IAA) induced differential expression of genes within the bacterial cellulose synthesis (bcs) operon. Using bioinformatics we have identified a novel phytohormone-regulated CRP/FNRKx transcription factor and provide evidence that it influences BC biosynthesis in K. xylinus. Lastly, utilizing current and previous data, we propose a model for the phytohormone-mediated fruit-bacteria interactions that K. xylinus experiences in nature.

AmrZ regulates cellulose production in Pseudomonas syringae pv. tomato DC3000

In Pseudomonas syringae pv. tomato DC3000, the second messenger c-di-GMP has been previously shown to stimulate pellicle formation and cellulose biosynthesis. A screen for genes involved in cellulose production under high c-di-GMP intracellular levels led to the identification of insertions in two genes, wssB and wssE, belonging to the Pto DC3000 cellulose biosynthesis operon wssABCDEFGHI. Interestingly, beside cellulose-deficient mutants, colonies with a rougher appearance than the wild type also arouse among the transposants. Those mutants carry insertions in amrZ, a gene encoding a transcriptional regulator in different Pseudomonas. Here, we provide evidence that AmrZ is involved in the regulation of bacterial cellulose production at transcriptional level by binding to the promoter region of the wssABCDEFGHI operon and repressing cellulose biosynthesis genes. Mutation of amrZ promotes wrinkly colony morphology, increased cellulose production and loss of motility in Pto DC3000. AmrZ regulon includes putative c-di-GMP metabolising proteins, like AdcA and MorA, which may also impact those phenotypes. Furthermore, an amrZ but not a cellulose-deficient mutant turned out to be impaired in pathogenesis, indicating that AmrZ is a key regulator of Pto DC3000 virulence probably by controlling bacterial processes other than cellulose production.

Bacterial exopolysaccharides: biosynthesis pathways and engineering strategies

Bacteria produce a wide range of exopolysaccharides which are synthesized via different biosynthesis pathways. The genes responsible for synthesis are often clustered within the genome of the respective production organism. A better understanding of the fundamental processes involved in exopolysaccharide biosynthesis and the regulation of these processes is critical toward genetic, metabolic and protein-engineering approaches to produce tailor-made polymers. These designer polymers will exhibit superior material properties targeting medical and industrial applications. Exploiting the natural design space for production of a variety of biopolymer will open up a range of new applications. Here, we summarize the key aspects of microbial exopolysaccharide biosynthesis and highlight the latest engineering approaches toward the production of tailor-made variants with the potential to be used as valuable renewable and high-performance products for medical and industrial applications.

High-yield production of extracellular type-I cellulose by the cyanobacterium Synechococcus sp. PCC 7002

Cellulose synthase, encoded by the cesA gene, is responsible for the synthesis of cellulose in nature. We show that the cell wall of the cyanobacterium Synechococcus sp. PCC 7002 naturally contains cellulose. Cellulose occurs as a possibly laminated layer between the inner and outer membrane, as well as being an important component of the extracellular glycocalyx in this cyanobacterium. Overexpression of six genes, cmc–ccp–cesAB–cesC–cesD–bgl, from Gluconacetobacter xylinus in Synechococcus sp. PCC 7002 resulted in very high-yield production of extracellular type-I cellulose. High-level cellulose production only occurred when the native cesA gene was inactivated and when cells were grown at low salinity. This system provides a method for the production of lignin-free cellulose from sunlight and CO₂ for biofuel production and other biotechnological applications.

Dimeric c-di-GMP is required for post-translational regulation of alginate production in Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic human pathogen that secretes the exopolysaccharide alginate during infection of the respiratory tract of individuals afflicted with cystic fibrosis and chronic obstructive pulmonary disease. Among the proteins required for alginate production, Alg44 has been identified as an inner membrane protein whose bis-(3',5')-cyclic dimeric guanosine monophosphate (c-di-GMP) binding activity post-translationally regulates alginate secretion. In this study, we report the 1.8 Å crystal structure of the cytoplasmic region of Alg44 in complex with dimeric self-intercalated c-di-GMP and characterize its dinucleotide-binding site using mutational analysis. The structure shows that the c-di-GMP binding region of Alg44 adopts a PilZ domain fold with a dimerization mode not previously observed for this family of proteins. Calorimetric binding analysis of residues in the c-di-GMP binding site demonstrate that mutation of Arg-17 and Arg-95 alters the binding stoichiometry between c-di-GMP and Alg44 from 2:1 to 1:1. Introduction of these mutant alleles on the P. aeruginosa chromosome show that the residues required for binding of dimeric c-di-GMP in vitro are also required for efficient alginate production in vivo. These results suggest that the dimeric form of c-di-GMP represents the biologically active signaling molecule needed for the secretion of an important virulence factor produced by P. aeruginosa.

Novel mixed-linkage β-glucan activated by c-di-GMP in Sinorhizobium meliloti

An artificial increase of cyclic diguanylate (c-di-GMP) levels in Sinorhizobium meliloti 8530, a bacterium that does not carry known cellulose synthesis genes, leads to overproduction of a substance that binds the dyes Congo red and calcofluor. Sugar composition and methylation analyses and NMR studies identified this compound as a linear mixed-linkage (1 → 3)(1 → 4)-β-D-glucan (ML β-glucan), not previously described in bacteria but resembling ML β-glucans found in plants and lichens. This unique polymer is hydrolyzed by the specific endoglucanase lichenase, but, unlike lichenan and barley glucan, it generates a disaccharidic → 4)-β-D-Glcp-(1 → 3)-β-D-Glcp-(1 → repeating unit. A two-gene operon bgsBA required for production of this ML β-glucan is conserved among several genera within the order Rhizobiales, where bgsA encodes a glycosyl transferase with domain resemblance and phylogenetic relationship to curdlan synthases and to bacterial cellulose synthases. ML β-glucan synthesis is subjected to both transcriptional and posttranslational regulation. bgsBA transcription is dependent on the exopolysaccharide/quorum sensing ExpR/SinI regulatory system, and posttranslational regulation seems to involve allosteric activation of the ML β-glucan synthase BgsA by c-di-GMP binding to its C-terminal domain. To our knowledge, this is the first report on a linear mixed-linkage (1 → 3)(1 → 4)-β-glucan produced by a bacterium. The S. meliloti ML β-glucan participates in bacterial aggregation and biofilm formation and is required for efficient attachment to the roots of a host plant, resembling the biological role of cellulose in other bacteria.

A molecular description of cellulose biosynthesis

Cellulose is the most abundant biopolymer on Earth, and certain organisms from bacteria to plants and animals synthesize cellulose as an extracellular polymer for various biological functions. Humans have used cellulose for millennia as a material and an energy source, and the advent of a lignocellulosic fuel industry will elevate it to the primary carbon source for the burgeoning renewable energy sector. Despite the biological and societal importance of cellulose, the molecular mechanism by which it is synthesized is now only beginning to emerge. On the basis of recent advances in structural and molecular biology on bacterial cellulose synthases, we review emerging concepts of how the enzymes polymerize glucose molecules, how the nascent polymer is transported across the plasma membrane, and how bacterial cellulose biosynthesis is regulated during biofilm formation. Additionally, we review evolutionary commonalities and differences between cellulose synthases that modulate the nature of the cellulose product formed.

Mechanism of activation of bacterial cellulose synthase by cyclic di-GMP

The bacterial signaling molecule cyclic-di-GMP stimulates the synthesis of bacterial cellulose, frequently found in biofilms. Bacterial cellulose is synthesized and translocated across the inner membrane by a complex of the cellulose synthase BcsA and BcsB subunits. Here we present crystal structures of the cyclic-di-GMP-activated BcsA–B complex. The structures reveal that cyclic-di-GMP releases an auto-inhibited state of the enzyme by breaking a salt bridge which otherwise tethers a conserved gating loop that controls access to and substrate coordination at the active site. Disrupting the salt bridge by mutagenesis generates a constitutively active cellulose synthase. Additionally, the cyclic-di-GMP activated BcsA–B complex contains a nascent cellulose polymer whose terminal glucose unit rests at a novel location above BcsA’s active site where it is positioned for catalysis. Our mechanistic insights are the first examples of how cyclic-di-GMP allosterically modulates enzymatic functions.

CelR, an ortholog of the diguanylate cyclase PleD of Caulobacter, regulates cellulose synthesis in Agrobacterium tumefaciens

Cellulose fibrils play a role in attachment of Agrobacterium tumefaciens to its plant host. While the genes for cellulose biosynthesis in the bacterium have been identified, little is known concerning the regulation of the process. The signal molecule cyclic di-GMP (c-di-GMP) has been linked to the regulation of exopolysaccharide biosynthesis in many bacterial species, including A. tumefaciens. In this study, we identified two putative diguanylate cyclase genes, celR (atu1297) and atu1060, that influence production of cellulose in A. tumefaciens. Overexpression of either gene resulted in increased cellulose production, while deletion of celR, but not atu1060, resulted in decreased cellulose biosynthesis. celR overexpression also affected other phenotypes, including biofilm formation, formation of a polar adhesion structure, plant surface attachment, and virulence, suggesting that the gene plays a role in regulating these processes. Analysis of celR and Δcel mutants allowed differentiation between phenotypes associated with cellulose production, such as biofilm formation, and phenotypes probably resulting from c-di-GMP signaling, which include polar adhesion, attachment to plant tissue, and virulence. Phylogenetic comparisons suggest that species containing both celR and celA, which encodes the catalytic subunit of cellulose synthase, adapted the CelR protein to regulate cellulose production while those that lack celA use CelR, called PleD, to regulate specific processes associated with polar localization and cell division.