Nonenzymatic amperometric determination of glucose by CuO nanocubes–graphene nanocomposite modified electrode

Schottky Interface Enabled Electrospun Rhodium Oxide Doped Gold for Both pH Sensing and Glucose Measurements in Neutral Buffer and Human Serum

This study has focused on adjusting sensing environment from basic to neutral pH and improve sensing performance by doping electrodeposited gold (Au) with metal oxide for nonenzymatic glucose measurements in forming a Schottky interface for superior glucose sensing with detailed analysis for the sensing mechanism. The prepared sensor also holds the ability to measure pH with the identical electrospun metal oxide-electrodeposited Au, which composed a dual sensor (glucose and pH sensor) through applying chronoamperometry and open circuit potential methods. The rhodium oxide nanocoral structure was fabricated with an electrospinning precursor solution, followed by a calcination process, and it was mixed with electrodeposited nanocoral gold to form the Schottky interface by constructing a p-n type heterogeneous junction for improved sensitivity in glucose detection. The prepared materials were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectrometry (XPS), etc. The prepared materials were used for both pH responsive testing and amperometric glucose measurements. The rhodium oxide nanocoral doped gold demonstrated a sensitivity of 3.52 μA mM-1 cm-2 and limit of detection of 20 μM with linear range up to 3 mM glucose concentration compared to solely electrodeposited gold for a sensitivity of 0.46 μA mM-1 cm-2 and a limit of detection of 450 μM. The Mott-Schottky method was used for the analysis of an electron transfer process from noble metal to metal oxide to electrolyte in demonstrating the improved sensitivity at neutral pH for glucose measurements due to the Schottky barrier adjustment mechanism at an applied flat band potential of 0.3 V. This work opens a new venue in illustrating the metal oxide/metal materials in the glucose neutral response mechanism. In the end, human serum samples were tested against current commercial glucose meter to certify the accuracy of the proposed sensor.

Anodized CuO-based reusable non-enzymatic glucose sensor as an alternative method for the analysis of pharmaceutical glucose infusions: a cyclic voltammetric approach

Analyzing pharmaceutical products is a quality control requirement in a production facility. This study presents a CuO electrode-based reusable non-enzymatic sensor as an alternative method for rapid analysis of glucose levels in glucose infusions. CuO is extensively employed as an electrode material in non-enzymatic glucose sensors. Conventionally, these electrodes are fabricated using chemical synthesis of CuO followed by immobilization to the electrode substrate. In contrast, here, Cu metal was mechanically modified to create a grooved surface, followed by electrochemical anodization and subsequent annealing process to grow a seamless CuO layer in situ with enhanced catalytic activity. The morphology of the electrodes was characterized using scanning electron microscopy (SEM) and X-ray diffractometry (XRD). The direct electrocatalytic activity of the developed CuO-modified electrode towards glucose oxidation in alkaline media was investigated by cyclic voltammetry in detail. The CuO-modified electrode commenced the oxidation process around 0.10 V vs. Ag pseudo-reference electrode, demonstrating a significant reduction in the overvoltage for glucose oxidation compared to the bare Cu electrode. The sensor is capable of detecting glucose at low oxidation potentials such as 0.2 V with a sensitivity value of 0.37 µA ppm-1, a wide linear range (80-2300 ppm), limit of quantification (LOQ) of 1 ppm, greater repeatability, 1% precision, 3% bias, a short response time (80 s), good reproducibility and excellent reusability (196 consecutive attempts). The enhanced performance and cost-effectiveness make this sensor a promising alternative method for product analysis in glucose injection solutions.

Engineering of graphene-based composites with hexagonal boron nitride and PEDOT:PSS for sensing applications

A unique nanomaterial has been developed for sweat analysis, including glucose level monitoring. Simple resusable low-cost sensors from composite materials based on graphene, hexagonal boron nitride, and conductive PEDOT:PSS (poly(3,4-ethylenedioxythiophene)polystyrene sulfonate) polymer have been developed and fabricated via 2D printing on flexible substrates. The sensors were tested as biosensors using different water-based solutions. A strong increase in the current response (several orders of magnitude) was observed for aqua vapors or glucose solution vapors. This property is associated with the sorption capacity of graphene synthesized in a volume of plasma jets and thus having many active centers on the surface. The structure and properties of graphene synthesized in a plasma are different from those of graphene created by other methods. As a result, the current response for a wearable sensor is 3-5 orders of magnitude higher for the reference blood glucose concentration range of 4-14 mM. It has been found that the most promising sensor with the highest response was fabricated based on the graphene:PEDOT:PSS composite. The graphene:h-BN:PEDOT:PSS (h-BN is hexagonal boron nitride) sensors demonstrated a longer response and the highest response after the functionalization of the sensors with a glucose oxidase enzyme. The reusable wearable graphene:PEDOT:PSS glucose sensors on a paper substrate demonstrated a current response of 10-10 to 10-5 A for an operating voltage of 0.5 V and glucose range of 4-10 mM.

Carbon nanotubes: a powerful bridge for conductivity and flexibility in electrochemical glucose sensors

The utilization of nanomaterials in the biosensor field has garnered substantial attention in recent years. Initially, the emphasis was on enhancing the sensor current rather than material interactions. However, carbon nanotubes (CNTs) have gained prominence in glucose sensors due to their high aspect ratio, remarkable chemical stability, and notable optical and electronic attributes. The diverse nanostructures and metal surface designs of CNTs, coupled with their exceptional physical and chemical properties, have led to diverse applications in electrochemical glucose sensor research. Substantial progress has been achieved, particularly in constructing flexible interfaces based on CNTs. This review focuses on CNT-based sensor design, manufacturing advancements, material synergy effects, and minimally invasive/noninvasive glucose monitoring devices. The review also discusses the trend toward simultaneous detection of multiple markers in glucose sensors and the pivotal role played by CNTs in this trend. Furthermore, the latest applications of CNTs in electrochemical glucose sensors are explored, accompanied by an overview of the current status, challenges, and future prospects of CNT-based sensors and their potential applications.

Non-enzymatic electrochemical detection of creatinine based on a glassy carbon electrode modified with a Pd/Cu2O decorated polypyrrole (PPy) nanocomposite: an analytical approach

The major constraints of standard enzymatic biosensors are poor long-term storage stability and high cost. Hence, there is extensive research towards fabrication of reliable enzymeless biosensors based on nanomaterials. In this paper, we present the development of an enzymeless electrochemical biosensor for highly precise detection of creatinine. This involves the use of a simple yet effective alternative to the commonly utilized Pd/Cu₂O/PPy nanocomposite, which was characterized by different analytical methods. The present electrochemical sensor provides a wide detection range (0.1 to 150 μM), low detection limit (0.05 μM) and high sensitivity (0.207 μA), and is capable of detecting the creatinine level in human urine samples, which are inexpensive. The results are reproducible, and the sensor is stable. The sensor demonstrates good electrocatalytic activity and selectivity towards the detection of creatinine in the presence of various other similar biological entities. When compared to other existing counterparts, the electrocatalytic behaviour of the present sensor is comparable, if not better. So, the present electrochemical sensor for creatinine might be employed as a long-term diagnostic alternative.

Electrocatalytic Platform Based on Silver-Doped Sugar Apple-like Cupric Oxide Embedded Functionalized Carbon Nanotubes for Nanomolar Detection of Acetaminophen (APAP)

Economical and nanomolar-level determination of the analgesic drug, acetaminophen (APAP), is reported in this work. A novel ternary nanocomposite based on silver-doped sugar apple-like cupric oxide (CuO)-decorated amine-functionalized multi-walled carbon nanotubes (fCNTs) was sonochemically prepared. CuO nanoparticles were synthesized based on the ascorbic acid-mediated low-temperature method, and sidewall functionalization of CNTs was carried out. Important characterizations of the synthesized materials were analyzed using SEM, TEM, HAADF-STEM, elemental mapping, EDX, lattice fringes, SAED pattern, XRD, EIS, UV-Vis, micro-Raman spectroscopy, and FTIR. It was noted the sonochemically prepared nanocomposite diligently fabricated on screen-printed carbon electrode showcased outstanding electrocatalytic performance towards APAP determination. The APAP sensor exhibited ultra-low limit of detection of 4 nM, wide linear concentration ranges of 0.02-3.77 and 3.77-90.02 μM, and high sensitivity of 30.45 μA μM^-1 cm^-2. Moreover, further evaluation of the sensor's performance based on electrochemical experiments showcased outstanding selectivity, stability, reproducibility, and repeatability. Further, excellent practical feasibility of the proposed APAP sensor was affirmed with excellent recovery larger than 96.86% and a maximum RSD of 3.67%.

Hierarchical Structures Composed of Cu(OH)2 Nanograss within Directional Microporous Cu for Glucose Sensing

Cu(OH)₂ nanomaterials are widely investigated for non-enzymatic glucose sensors due to their low-cost and excellent performance. Cu(OH)₂ nanomaterials usually grow on substrates to form sensor electrodes. Reported works mainly focus on structure adjusting of the Cu(OH)₂ nanostructures, while the optimization of substrates is still lacking. In the present work, directional porous Cu (DPC) was applied as the substrate for the growth of Cu(OH)₂ nanograss (NG), and hierarchical structures of Cu(OH)₂@DPC were prepared by alkaline oxidation. The morphology and microstructure evolution of the prepared hierarchical structures was investigated, and the non-enzymatic glucose sensing performance was evaluated. Cu(OH)₂@DPC exhibits enhanced comprehensive non-enzymatic glucose sensing performance compared to the reported ones, which may benefit from both the effective adsorption of the Cu(OH)₂ NG with a relatively high surface area and the high solute exchange of the DPC by a channel effect. This work provides new insights into the further improvement of the non-enzymatic glucose sensing performance of Cu(OH)₂ nanostructures by optimizing the substrate structure.

Non-Enzymatic Glucose Sensors Involving Copper: An Electrochemical Perspective

Non-enzymatic glucose sensors based on the use of copper and its oxides have emerged as promising candidates to replace enzymatic glucose sensors owing to their stability, ease of fabrication, and superior sensitivity. This review explains the theories of the mechanism of glucose oxidation on copper transition metal electrodes. It also presents an overview on the development of among the best non-enzymatic copper-based glucose sensors in the past 10 years. A brief description of methods, interesting findings, and important performance parameters are provided to inspire the reader and researcher to create new improvements in sensor design. Finally, several important considerations that pertain to the nano-structuring of the electrode surface is provided.

Copper/reduced graphene oxide film modified electrode for non-enzymatic glucose sensing application

Numerous studies suggest that modification with functional nanomaterials can enhance the electrode electrocatalytic activity, sensitivity, and selectivity of the electrochemical sensors. Here, a highly sensitive and cost-effective disposable non-enzymatic glucose sensor based on copper(II)/reduced graphene oxide modified screen-printed carbon electrode is demonstrated. Facile fabrication of the developed sensing electrodes is carried out by the adsorption of copper(II) onto graphene oxide modified electrode, then following the electrochemical reduction. The proposed sensor illustrates good electrocatalytic activity toward glucose oxidation with a wide linear detection range from 0.10 mM to 12.5 mM, low detection limit of 65 µM, and high sensitivity of 172 μA mM^–1 cm^–2 along with satisfactory anti-interference ability, reproducibility, stability, and the acceptable recoveries for the detection of glucose in a human serum sample (95.6–106.4%). The copper(II)/reduced graphene oxide based sensor with the superior performances is a great potential for the quantitation of glucose in real samples.

A Screen-Printed Electrode Modified With Graphene/Co3O4 Nanocomposite for Electrochemical Detection of Tramadol

In this paper, graphene (Gr)/Co₃O₄ nanocomposite was synthesized and utilized for the development of a novel electrochemical sensor to detect tramadol. Tramadol determination was examined by linear sweep voltammetry, differential pulse voltammetry, cyclic voltammetry, and chronoamperometry on Gr/Co₃O₄ nanocomposite-modified screen-printed electrode (Gr/Co₃O₄/SPE) in phosphate-buffered saline (PBS). Under the optimized condition, the detection limit of tramadol is 0.03 μM (S/N = 3) in the linear ranges of 0.1–500.0 μM. Furthermore, Gr/Co₃O₄/SPE was satisfactorily utilized to detect tramadol in tramadol tablet and urine specimens.

Green fabrication of Cu/rGO decorated SWCNT buckypaper as a flexible electrode for glucose detection

As a paper-like membrane composed of single-walled carbon nanotube (SWCNT), buckypaper possesses high conductivity, ideal flexibility, large surface area, great thermal/chemical stability and biocompatibility, which has manifested its potential as an alternative support material. However, due to the lack of defects, high quality SWCNT synthesized by arc-discharge method is difficult to be modified with metal nanoparticles for electro-catalysis. In this paper, a novel green strategy has been developed to fabricate SWCNT buckypaper decorated with Cu/reduced graphene oxide (Cu/rGO-BP) for the first time, in which graphene oxide functions as the intermediate between SWCNT and Cu nanoparticles. The fabricated Cu/rGO-BP was applied as a flexible electrode for electrochemical glucose detection. The electrode exhibited excellent electro-catalytic activity for glucose oxidation. The sensor based on Cu/rGO-BP performed a high upper limit of linear range (25 mM), which is close to commercial glucose sensors. The proposed strategy for Cu/rGO-BP fabrication can be extended to modify buckypaper with other metal or metal oxide nanoparticles, and thus opens an innovative route to potential practical applications of flexible buckypaper in wearable bioelectronics.

A Brief Description of Cyclic Voltammetry Transducer-Based Non-Enzymatic Glucose Biosensor Using Synthesized Graphene Electrodes

The essential disadvantages of conventional glucose enzymatic biosensors such as high fabrication cost, poor stability of enzymes, pH value-dependent, and dedicated limitations, have been increasing the attraction of non-enzymatic glucose sensors research. Beneficially, patients with diabetes could use this type of sensor as a fourth-generation of glucose sensors with a very low cost and high performance. We demonstrate the most common acceptable transducer for a non-enzymatic glucose biosensor with a brief description of how it works. The review describes the utilization of graphene and its composites as new materials for high-performance non-enzymatic glucose biosensors. The electrochemical properties of graphene and the electrochemical characterization using the cyclic voltammetry (CV) technique of electrocatalysis electrodes towards glucose oxidation have been summarized. A recent synthesis method of the graphene-based electrodes for non-enzymatic glucose sensors have been introduced along with this study. Finally, the electrochemical properties such as linearity, sensitivity, and the limit of detection (LOD) for each sensor are introduced with a comparison with each other to figure out their strengths and weaknesses.

Electrochemical Preparation of Polyaniline- Supported Cu-CuO Core-Shell on 316L Stainless Steel Electrodes for Nonenzymatic Glucose Sensor

In this article, we reported the elaboration of a nonenzymatic glucose sensor based on the polyaniline-supported Cu-CuO core-shell structure prepared on the 316L stainless steel electrode by electrochemical methods. In the first step, polyaniline (PANI) film was electrodeposited on the 316L substrate from a solution of 0.1 M aniline and 0.5 M sulfuric acid in absolute ethanol by the cyclic voltammetry (CV) method. In the second step, the copper particles were electrodeposited on the PANI film from CuCl2·2H2O 0.01 M precursor prepared in a KCl 0.1 M solution by the CV method. In the third step, Cu particles were partially oxidized to CuO by the CV method in a NaOH 0.1 M electrolyte to form a Cu-CuO core-shell structure supported on the PANI film. The as-prepared electrode (Cu-CuO/PANI/316L) was used to detect glucose in a NaOH 0.1 M solution. The Cu-CuO/PANI/316L sensor exhibited a linear range of 0.1–5 mM (R2 = 0.995) with a detection limit of 0.1 mM (S/N = 3) and high sensitivity of (25.71 mA·mM−1·cm−2). In addition, no significant interference was observed from sucrose, maltose, lactose, and ascorbic acid. The results showed that the polyaniline-supported Cu-CuO core-shell structure has the potential to be applied as an electrode material for the nonenzymatic glucose sensor.

A Flexible Portable Glucose Sensor Based on Hierarchical Arrays of Au@Cu(OH)2 Nanograss

Flexible physiological medical devices have gradually spread to the lives of people, especially the elderly. Here, a flexible integrated sensor based on Au nanoparticle modified copper hydroxide nanograss arrays on flexible carbon fiber cloth (Au@Cu(OH)2/CFC) is fabricated by a facile electrochemical method. The sensor possesses ultrahigh sensitivity of 7.35 mA mM-1 cm-2 in the linear concentration range of 0.10 to 3.30 mM and an ultralow detection limit down to 26.97 nM. The fantastic sensing properties can be ascribed to the collective effect of the superior electrochemical catalytic activity of nanograss arrays with dramatically enhanced electrochemically active surface area as well as mass transfer ability when modified with Au and intimate contact between the active material (Au@Cu(OH)2) and current collector (CFC), concurrently supplying good conductivity for electron/ion transport during glucose biosensing. Furthermore, the device also exhibits excellent anti-interference and stability for glucose detection. Owing to the distinguished performances, the novel sensor shows extreme reliability for practical glucose testing in human serum and juice samples. Significantly, these unique properties and the soft structure of silk fabric can provide a promising structure design for a flexible micro-device and a great potential material candidate of electrochemical glucose sensor.

Electrochemical Detection of Gallic Acid-Capped Gold Nanoparticles Using a Multiwalled Carbon Nanotube-Reduced Graphene Oxide Nanocomposite Electrode

Recently, a plethora of ecofriendly methods have been developed for the synthesis of AuNPs using a multitude of biogenic agents. Polyphenols from plants are particularly attractive for producing AuNPs because in addition to helping with the synthesis of AuNPs, the polyphenol capping of the NPs can be used as a platform for versatile applications. Polyphenol-capped AuNPs could also make the detection of AuNPs possible, should they be released into the environment. Because polyphenols are redox-active, they can be used as a probe to detect AuNPs using electrochemical techniques. In this work, we have developed an MWCNT-rGO nanocomposite electrode for the sensitive detection of AuNPs capped with gallic acid (GA, a green-tea-derived polyphenol) using differential pulse voltammetry (DPV). The reduction of gallic acid-capped AuNPs was used as the quantification signal, and the calibration curve displayed a detection limit of 2.57 pM. Using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), we have shown that the modification of the electrode surface with an MWCNT-rGO hybrid nanocomposite resulted in a 10-fold increase in current response leading to the sensitive detection of GA-AuNPs compared to unmodified electrodes. We have also demonstrated the applicability of the electrochemical sensor in detecting GA-AuNPs in various analytical matrixes such as human serum and natural creek water (Highland Creek, ON) with good recovery.

Novel Preparation of Reduced Graphene Oxide-Silver Complex using an Electrical Spark Discharge Method

This study used an electrical discharge machine (EDM) to perform an electrical spark discharge method (ESDM), which is a new approach for reducing graphene oxide (GO) at normal temperature and pressure, without using chemical substances. A silver (Ag) electrode generates high temperature and high energy during gap discharge. Ag atoms and Ag nanoparticles (AgNP) are suspended in GO, and ionization generates charged Ag⁺ ions in the Ag plasma with a strong reducing property, thereby carrying O away from GO. A large flake-like structure of GO was simultaneously pyrolyzed to a small flake-like structure of reduced graphene oxide (rGO). When Ag was used as an electrode, GO was reduced to rGO and the exfoliated AgNP surface was coated with rGO, thus forming an rGOAg complex. Consequently, suspensibility and dispersion were enhanced.

Synthesis of wearable and flexible NiP0.1-SnOx/PANI/CuO/cotton towards a non-enzymatic glucose sensor

Ni-SnO_x, PANI and CuO nanoparticles were synthesized on cotton fabric through chemical methods to make a new flexible high-performance non-enzymatic glucose sensor. FESEM, XRD, XPS, EDS and ATR analysis were employed to characterize the structure and the morphology of the nanomaterials. The high electrochemical performance of nickel and copper oxide and hydroxide on a conductive template leads to fabrication of a wearable and flexible cotton electrode with an excellent electrocatalytic activity to oxidize glucose. This hybrid system on the fabric as an electrode indicates a detection limit of 130 nM with wide linear range of 0.001-10 mM. The sensitivity was measured to be 1625 and 1325 μA mM^-1 cm^-2 for the ranges of 0.001-1 and 1-10 mM, respectively. Long-term stability, appropriate selectivity and reusability for many times make possibility for utilizing the fabricated sensor in the practical applications. The fabric is a wide linear range electrode with low detection limit to sense glucose concentration in the body fluids as well as the human blood that can be presumably suggested for designing other similar flexible types of sensor.

A portable micro glucose sensor based on copper-based nanocomposite structure

A sensor device based on a copper-based nanocomposite structure is achieved and presents excellent sensing performance for glucose.

Green synthesis of copper oxide nanoparticles decorated reduced graphene oxide for high sensitive detection of glucose

A non-enzymatic glucose sensor based on pencil graphite electrode (PGE) modified by copper oxide nanoparticles decorated reduced graphene oxide (CuO(NP)/rGO-PGE) was prepared. XRD patterns showed partially electrochemically reduction of GO and monoclinic structure of CuO on the PGE. The prepared CuO(NP)/rGO exhibited a nanoporous structure by scanning electron microscopy (SEM). Transmittance electron microscopy (TEM) revealed copper oxide nanoparticles were well distributed on rGO and had semispherical shapes with diameter 3-5 nm. Cyclic voltammetry at CuO(NP)/rGO-PGE showed the immobilized CuO(NP)s were highly stable in alkaline solutions and had high electrocatalytic activity toward glucose oxidation. Using amperometry, the detection limit of [0.091 (±0.003) μM] and concentration sensitivity of [4760 (±3.2) μA mM^-1 cm^-2] for glucose was obtained at optimum conditions. The applicability of the sensor was evaluated to determine the glucose concentration in human blood serum samples and the experimental results were comparable with those measured by traditional spectrophotometric methods. The preparation of CuO(NP)/rGO-PGE was reproducible, very simple, fast and inexpensive for practical application.

Electrochemical nonenzymatic sensing of glucose using advanced nanomaterials

An overview (with 376 refs.) is given here on the current state of methods for electrochemical sensing of glucose based on the use of advanced nanomaterials. An introduction into the field covers aspects of enzyme based sensing versus nonenzymatic sensing using nanomaterials. The next chapter cover the most commonly used nanomaterials for use in such sensors, with sections on uses of noble metals, transition metals, metal oxides, metal hydroxides, and metal sulfides, on bimetallic nanoparticles and alloys, and on other composites. A further section treats electrodes based on the use of carbon nanomaterials (with subsections on carbon nanotubes, on graphene, graphene oxide and carbon dots, and on other carbonaceous nanomaterials. The mechanisms for electro-catalysis are also discussed, and several Tables are given where the performance of sensors is being compared. Finally, the review addresses merits and limitations (such as the frequent need for working in strongly etching alkaline solutions and the need for diluting samples because sensors often have analytical ranges that are far below the glucose levels found in blood). We also address market/technology gaps in comparison to commercially available enzymatic sensors. Graphical Abstract Schematic representation of electrochemical nonenzymatic glucose sensing on the nanomaterials modified electrodes. At an applied potential, the nanomaterial-modified electrodes exhibit excellent electrocatalytic activity for direct oxidation of glucose oxidation.

Novel synthesis and characterization of pristine Cu nanoparticles for the non-enzymatic glucose biosensor

Non enzymatic electrochemical glucose sensing was developed based on pristine Cu Nanopartilces (NPs)/Glassy Carbon Electrode (GCE) which can be accomplished by simple green method via ocimum tenuiflorum leaf extract. Then, the affect of leaf extract addition on improving Structural, Optical and electrochemical properties of pristine cu NPs was investigated. The synthesized Cu NPs were characterized with X-ray diffraction (X-ray), Uv-Visible spectroscopy (Uv-Vis), Fourier transformation infrared spectroscopy (FTIR), Particle size distribution (PSA), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Transmission electron microscopy (TEM) for structural optical and morphological studies respectively. The synthesized Cu NPs were coated over glassy carbon electrode (GCE) to study the electrochemical response of glucose by cyclic voltammetry and ampherometer. The results indicates that the modified biosensor shows a remarkable sensitivity (1065.21 μA mM^-1 cm^-2), rapid response time (<3s), wide linear range (1 to 7.2 mM), low detection limit (0.038 μM at S/N = 3). Therefore, the prepared Cu NPs by the Novel Bio-mediated route were exploited to construct a non-enzymatic glucose biosensor for sustainable clinical field applications.

Sonochemical Synthesis of Sulfur Doped Reduced Graphene Oxide Supported CuS Nanoparticles for the Non-Enzymatic Glucose Sensor Applications

Over the present material synthesis routes, the sonochemical route is highly efficient and comfortable way to produce nanostructured materials. In this way, the copper sulfide (CuS-covellite) and sulfur doped reduced graphene oxide (S-rGO) nanocomposite was prepared by sonochemical method. Interestingly, the structure of the as-prepared S-rGO/CuS was changed from the covellite to digenite phase. Herein, the S-rGO was act as a mild oxidizer and liable for the structural transformations. These structural changes are sequentially studied by various physicochemical characterizations such as Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM). After scrupulous structural evaluations, the transformation of CuS phase was identified and documented. This oxidized CuS has an excellent electrocatalytic activity when compare to the bulk CuS. This S-rGO/CuS was further used for the determination of glucose and acquired good electrocatalytic performances. This S-rGO/CuS was exhibited a wide linear concentration range, 0.0001-3.88 mM and 3.88-20.17 mM, and a low-level detection limit of 32 nM. Moreover, we have validated the practicability of our developed glucose sensor in real biological samples.