Biodegradable dextran-based microspheres for delivery of anticancer drug mitomycin C

Biopolymeric Prodrug Systems as Potential Antineoplastic Therapy

Nowadays, cancer represents a major public health issue, a substantial economic issue, and a burden for society. Limited by numerous disadvantages, conventional chemotherapy is being replaced by new strategies targeting tumor cells. In this context, therapies based on biopolymer prodrug systems represent a promising alternative for improving the pharmacokinetic and pharmacologic properties of drugs and reducing their toxicity. The polymer-directed enzyme prodrug therapy is based on tumor cell targeting and release of the drug using polymer–drug and polymer–enzyme conjugates. In addition, current trends are oriented towards natural sources. They are biocompatible, biodegradable, and represent a valuable and renewable source. Therefore, numerous antitumor molecules have been conjugated with natural polymers. The present manuscript highlights the latest research focused on polymer–drug conjugates containing natural polymers such as chitosan, hyaluronic acid, dextran, pullulan, silk fibroin, heparin, and polysaccharides from Auricularia auricula.

Use of Self-Assembled Colloidal Prodrug Nanoparticles for Controlled Drug Delivery of Anticancer, Antifibrotic and Antibacterial Mitomycin

Herein we present the synthesis of a polymeric prodrug nanomaterial capable of spontaneous, self-assembled nanoparticle formation and of the conjugation (encapsulation) of drugs with amino and/or carboxyl and/or hydroxyl groups via ester and/or amide linkage. Mitomycin C (MMC) a versatile drug with antibiotic, antibacterial and antineoplastic properties, was used to prove this concept. The in vitro drug release experiments showed a fast release for the pure MMC (k = 49.59 h^-n); however, a significantly lower MMC dissolution rate (k = 2.25, 1.46, and 1.35 h^-n) was obtained for the nanoparticles with increased cross-link density (3, 10, 21%). The successful modification and conjugation reactions were confirmed using FTIR and EDX measurements, while the mucoadhesive properties of the self-assembled particles synthesized in a simple one-pot reaction were proved by rheological measurement. The prepared biocompatible polymeric prodrugs are very promising and applicable as a drug delivery system (DDS) and useful in the area of cancer treatment.

In vivo effect of magnetic microspheres loaded with E2-a in the treatment of alveolar echinococcosis

The alveolar echinococcosis of human is a severe helminthic disease caused by the larva of Echinococcus multilocularis tapeworms. Novel compounds or therapy strategies for the treatment of alveolar echinococcosis are urgently needed due to the limitation of the widely used albendazole. Magnetic microspheres as drug carriers in magnetically targeted therapy of tumor have gained growing interests advantaged by delivering the drug to the aimed site, achieving localized therapeutic effect effectively under the influence of an external magnetic field. In this study, we formulated magnetic microspheres loaded with E2-a (PLGA-Fe-E2-a) and identified the activity in E. multilocularis-infected mice which infected with 3,000 protoscoleces intraperitoneally. Compared with the untreated control, with the help of a magnet, there was a significant reduction in parasite burden with PLGA-Fe-E2-a treatment and similar reduction observed with albendazole. PLGA-Fe-E2-a treatment group also showed a significant increase in the IFN-γ level and impaired morphological and ultrastructural alterations. Most importantly, one-third concentrations of E2-a from PLGA-Fe-E2 based on the release profile of E2-a was equally effective in inhibiting metacestode growth as E2-a treated group, supporting efficacy and bioavailability of a drug. It will be an alternative treatment for alveolar echinococcosis using magnetic microspheres as drug carriers.

The Use of TAT Peptide-Functionalized Graphene as a Highly Nuclear-Targeting Carrier System for Suppression of Choroidal Melanoma

Tumorous metastasis is a difficult challenge to resolve for researchers and for clinicians. Targeted delivery of antitumor drugs towards tumor cells' nuclei can be a practical approach to resolving this issue. This work describes an efficient nuclear-targeting delivery system prepared from trans-activating transcriptional activator (TAT) peptide-functionalized graphene nanocarriers. The TAT peptide, originally observed in a human immunodeficiency virus 1 (HIV-1), was incorporated with graphene via an edge-functionalized ball-milling method developed by the author's research group. High tumor-targeting capability of the resulting nanocarrier was realized by the strong affinity between TAT and the nuclei of cancer cells, along with the enhanced permeability and retention (EPR) effect of two-dimensional graphene nanosheets. Subsequently, a common antitumor drug, mitomycin C (MMC), was covalently linked to the TAT-functionalized graphene (TG) to form a nuclear-targeted nanodrug MMC-TG. The presence of nanomaterials inside the nuclei of ocular choroidal melanoma (OCM-1) cells was shown using transmission electron microscopy (TEM) and confocal laser scanning microscopy. In vitro results from a Transwell co-culture system showed that most of the MMC-TG nanodrugs were delivered in a targeted manner to the tumorous OCM-1 cells, while a very small amount of MMC-TG was delivered in a non-targeted manner to normal human retinal pigment epithelial (ARPE-19) cells. TEM results further confirmed that apoptosis of OCM-1 cells was started from the lysis of nuclear substances, followed by the disappearance of nuclear membrane and cytoplasm. This suggests that the as-synthesized MMC-TG is a promising nuclear-target nanodrugfor resolution of tumorous metastasis issues at the headstream.

The Potential of Magnetic Nanoparticles for Diagnosis and Treatment of Cancer Based on Body Magnetic Field and Organ-on-the-Chip

Cancer is an abnormal cell growth which tends to proliferate in an uncontrolled way and, in some cases, leads to metastasis. If cancer is left untreated, it can immediately cause death. The use of magnetic nanoparticles (MNPs) as a drug delivery system will enable drugs to target tissues and cell types precisely. This study describes usual strategies and consideration for the synthesis of MNPs and incorporates payload drug on MNPs. They have advantages such as visual targeting and delivering which will be discussed in this review. In addition, we considered body magnetic field to make drug delivery process more effective and safer by the application of MNPs and tumor-on-chip.

Preparation and drug delivery of dextran-drug complex

Dextran as a drug carrier for inhibiting cancer cells effectively reduces the toxic and side effects of the drug in the biological body. Targeting improves the concentration of active substance around the target tissue, which reduces damage to other heavy organs and other normal tissues. Dextran will be a potential carrier for the delivery of antitumor drugs in the future, which provides the possibility of slow-release chemotherapy and targeted drug delivery. Herein, the preparation and drug delivery of dextran-drug complex were summarized and discussed in detail.

LHRH Targeted Chonderosomes of Mitomycin C in Breast Cancer: An In Vitro/ In Vivo Study

BACKGROUND

Mitomycin C (MMC) is an anti-cancer drug used for the treatment of breast cancer with limited therapeutic index, extreme gastric adverse effects and bone marrow suppression. The purpose of the present study was the preparation of a dual-targeted delivery system of MMC for targeting CD44 and LHRH overexpressed receptors of breast cancer.

METHODS

MMC loaded LHRH targeted chonderosome was prepared by precipitation method and was characterized for their physicochemical properties. Cell cycle arrest and cytotoxicity tests were studied on cell lines of MCF-7, MDA-MB231 and 4T1 (as CD44 and LHRH positive cells) and BT-474 cell line (as CD44 negative receptor cells). The in vivo histopathology and antitumor activity of MMC-loaded chonderosomes were compared with free MMC in 4T1 cells inducing breast cancer in Balb-c mice.

RESULTS

MMC loaded LHRH targeted chonderosomes caused 3.3 and 5.5 fold more cytotoxicity on MCF-7 and 4T1 cells than free MMC at concentrations of 100μM and 10μM, respectively. However, on BT-474 cells the difference was insignificant. The cell cycle test showed no change for MMC mechanism of action when it was loaded in chonderosomes compared to free MMC. The in vivo antitumor studies showed that MMC loaded LHRH targeted chonderosomes were 6.5 fold more effective in the reduction of tumor volume than free MMC with the most severe necrosis compared to non-targeted chonderosomes in pathological studies on harvested tumors.

CONCLUSION

The developed MMC loaded LHRH targeted chonderosomes were more effective in tumor growth suppression and may be promising for targeted delivery of MMC in breast cancer.

In vitro and in vivo evaluation of a novel mitomycin nanomicelle delivery system

Mitomycin C (MMC), naturally synthesized by Streptomyces caespitosus, is a potent antineoplastic antibiotic for the treatment of various solid tumors. However, the defects of conventional MMC injections have greatly limited its clinical application due to its toxic side effects and non-specific interactions. To solve this problem, the PEG_2k-Fmoc-Ibuprofen (PEG-FIbu) micellar nanocarrier was synthesized and the MMC-loaded micelles (PEG-FIbu/MMC) were prepared by thin film hydration method and characterized. Ibuprofen was used as a hydrophobic domain of PEG-FIbu nanocarrier, and we expect it to synergize with codelivered MMC in the overall antitumor activity. The in vitro release of PEG-FIbu/MMC was examined by dialysis method using MMC injection as a control. Our data suggested that PEG-FIbu/MMC micelles presented appropriate particle size, low CMC value, good stability, high drug loading efficiency and sustained release properties. In vitro cytotoxicity studies with several tumor cell lines showed that the carrier was effective in mediating intracellular delivery of MMC to tumor cells. In vivo pharmacokinetics, tissue distribution and therapeutic study proved that PEG-FIbu/MMC micelles prolonged blood circulation, significantly improved the tumor accumulation and therapeutic efficacy, and reduced undesirable side effect on normal tissues compared to MMC injection. In general, PEG-FIbu/MMC micelles represented an effective strategy to improve the performance for the delivery of MMC and safety of medication.

The introduction of a micellar delivery system of MMC increase efficiency, reduce toxicity and enhance specific interactions in tumor.

Synthesis of amine-polyglycidol functionalised Fe3O4@SiO2nanocomposites for magnetic hyperthermia, pH-responsive drug delivery, and bioimaging applications

We report the biocompatible Fe₃O₄@SiO₂@APG-F nanocomposite for drug delivery and hyperthermia applications. The Fe₃O₄@SiO₂@APG-F nanocomposite could serve as a good hyperthermia agent, drug delivery carrier, and fluorescent contrast agent.

Mitomycin C-soybean phosphatidylcholine complex-loaded self-assembled PEG-lipid-PLA hybrid nanoparticles for targeted drug delivery and dual-controlled drug release

Most present drug-phospholipid delivery systems were based on a water-insoluble drug-phospholipid complex but rarely water-soluble drug-phospholipid complex. Mitomycin C (MMC) is a water-soluble anticancer drug extensively used in first-line chemotherapy but is limited by its poor aqueous stability in vitro, rapid elimination from the body, and lack of target specificity. In this article, we report the MMC-soybean phosphatidylcholine complex-loaded PEG-lipid-PLA hybrid nanoparticles (NPs) with Folate (FA) functionalization (FA-PEG-PE-PLA NPs@MMC-SPC) for targeted drug delivery and dual-controlled drug release. FA-PEG-PE-PLA NPs@MMC-SPC comprise a hydrophobic core (PLA) loaded with MMC-SPC, an amphiphilic lipid interface layer (PE), a hydrophilic shell (PEG), and a targeting ligand (FA) on the surface, with a spherical shape, a nanoscaled particle size, and high drug encapsulation efficiency of almost 95%. The advantage of the new drug delivery systems is the early phase controlled drug release by the drug-phospholipid complex and the late-phase controlled drug release by the pH-sensitive polymer-lipid hybrid NPs. In vitro cytotoxicity and hemolysis assays demonstrated that the drug carriers were cytocompatible and hemocompatible. The pharmacokinetics study in rats showed that FA-PEG-PE-PLA NPs@MMC-SPC significantly prolonged the blood circulation time compared to that of the free MMC. More importantly, FA-PEG-PE-PLA NPs@MMC-SPC presented the enhanced cell uptake/cytotoxicity in vitro and superior tumor accumulation/therapeutic efficacy in vivo while reducing the systemic toxicity. A significant accumulation of MMC in the nuclei as the site of MMC action achieved in FA-PEG-PE-PLA NPs@MMC-SPC made them ideal for MMC drug delivery. This study may provide an effective strategy for the design and development of the water-soluble drug-phospholipid complex-based targeted drug delivery and sustained/controlled drug release.

PEG-PCL-DEX polymersome-protamine vector as an efficient gene delivery system via PEG-guided self-assembly

AIM

The nonviral carrier system based on the triblock copolymer PEG-PCL-DEX (PPD) and protamine was developed for nucleic acid delivery.

MATERIALS & METHODS

Self-assembly occurred in the PEG continuous phase to form 'dextran-interior' polymersomes. siRNA can be condensed by protamine and encapsulated into PPD polymersomes in order to form the PPD-protamine siRNA nanoparticles by thermodynamically preferential partition between the PEG continuous phase and the dextran cavity.

RESULTS

This system can package siRNA into PPD polymersomes to form 145.2 ± 8.02-nm (± standard deviation) nanoparticles, and the ζ-potential can be reduced to approximately 0 mV. PPD-protamine siRNA nanoparticles achieved cellular uptake of siRNA in SMMC-7721 cells with negligible cytotoxicity, and the GL3 gene expression can be reduced to 61.73 ± 6.25%. A biodistribution study of nanoparticles suggested that the PPD-protamine siRNA nanoparticles mainly accumulated in liver.

CONCLUSION

All of these results suggest that PPD-protamine carriers may offer a promising gene delivery strategy for the treatment of liver-related disease.

Amorphous calcium phosphate nanoparticles could function as a novel cancer therapeutic agent by employing a suitable targeted drug delivery platform

Employment of nanovehicular system for delivering apoptogenic agent to cancer cells for inducing apoptosis has widely been investigated. Loading efficacy and controlled release of the agents are of the inseparable obstacles that hamper the efforts in reaching an efficacious targeted cancer therapy method. When the carrier itself is apoptogenic, then there is no need to load the carrier with apoptogenic agent and just delivering of the particle to the specific location matters. Hence, we hypothesize that amorphous calcium phosphate nanoparticle (ACPN) is a potent candidate for apoptosis induction, although encapsulation in liposome shell, and surface decoration with targeting ligand (TL), and cell-penetrating peptide (CPP) plays a pivotal role in the employment of this agent. It is well understood that elevation in cytosolic Ca2+ ([Ca2+]c) would result in the induction of apoptosis. ACPN has the potential to cause imbalance in this medium by elevating [Ca2+]c. Owning to the fact that the nanoparticles should be delivered into cytosol, it is necessary to trap them in a liposomal shell for evading endocytosis. It was demonstrated that employment of the trans-activator of transcription (TAT) as CPP eminently enhances the efficacy of endosomal escape; therefore, the platform is designed in a way that TAT is positioned on the surface of the liposome. Due to the fact that the apoptosis should be induced in sole cancer cells, Folate as TL is also attached on the surface of the liposome. This hypothesis heralds the new generation of chemotherapeutic agents and platforms which could have less side effect than the most common ones, in addition to other advantages they have.

Mechanical, thermal and surface properties of polyacrylamide/dextran semi-interpenetrating network hydrogels tuned by the synthesis temperature

The mechanical, rheological, thermal, and surface behaviors of three polyacrylamide/dextran (PAAm/Dx) semi-interpenetrating polymer network (semi-IPN) hydrogels, prepared at 22°C, 5°C and −18°C, were investigated. The results were compared with those obtained on cross-linked PAAm without Dx synthesized under the same conditions. Hydrogels prepared at the lowest temperature were the most mechanically stable. The thermal stability of the semi-IPN hydrogels is slightly lower than the corresponding PAAm gels, irrespective of preparation temperature. The water vapor sorption capacity depended on the presence of Dx as well as preparation temperature, which determines the network morphology.

Synthesis and Characterization of Graft Copolymer of Dextran and 2-Acrylamido-2-methylpropane Sulphonic Acid

A novel biodegradable graft copolymer of dextran (Dx) and 2-acrylamido-2-methyl-1-propane sulphonic acid (AMPS) was synthesized by grafting poly-AMPS chains onto dextran backbone by free radical polymerization using ceric ammonium nitrate (CAN) as an initiator. Different amounts of AMPS were used to synthesize four different grades of graft copolymers with different side chain lengths. These grafted polymers were characterized by elemental analysis, FTIR, 1HNMR, rheological technique, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray diffractometry (XRD). They exhibited efficient flocculation performance in kaolin suspension.

Fabrication of docetaxel surfaced Fe3O4 magnetite nanoparticles and their cytotoxicity on 4 T1 breast cancer cells

Background

In the recent years, there is an increasing attention to the using of Fe₃O₄ magnetite nanoparticles (MNPs) as drug delivery systems. Application of this nanoparticles could profit advantages of nanomedicine to enhance biological activity of pharmaceutical ingredients.

Methods

Fe₃O₄ MNPs were synthesised by a chemical method and characterized by transmission electron microscopy and energy-dispersive spectroscopy techniques. In the next step, docetaxel-coated Fe₃O₄ MNPs were prepared, using percipitation method. The surface chemistry of docetaxel-coated Fe₃O₄ MNPs as well as their thermal decomposition characteristics were examined using fourier transform infrared spectroscopy and thermogravimetric analyzer equipment, respectively. The cytotoxicity assay was conducted on 4 T1 breast cancer carsinoma by MTT assay to evaluate the possible in vitro antiproliferative effects of docetaxel-coated Fe₃O₄ MNPs.

Results

During precipitation process, docetaxel molecules were precipitated on the surface of Fe₃O₄ MNPs by the ratio of 3:100 w/w which indicates that each milligram of coated Fe₃O₄ MNPs averagely contained 30 μg pure docetaxel compound. Docetaxel showed aniproliferative effects against mentioned cell line. The higestest concentartion of docetaxel (80 μg/ml) caused about 80% cell death. However, the results demostarted that much lower amounts of docetaxel will be needed in combination of Fe₃O₄ MNPs to produce the potent antiproliferative effect compared to docetaxel alone. Dose response cytotoxicity assay of docetaxel-coated Fe₃O₄ MNPs against 4 T1 breast cancer cells showed that lower amount of docetaxel (0.6 μg/ml) can exhibit higher cytotoxic effect against this cancer cell line (90% cell death).

An efficient acetylation of dextran using in situ activated acetic anhydride with iodine

A facile, efficient, cost-effective and solvent-free acetylation method has been developed for the acetylation of dextran. Dextran acetates were successfully synthesized using different molar ratios of acetic anhydride in the presence of iodine as a catalyst without the use of any solvent. The reactions were realized at 50?C for 3 h under stirring and nitrogen. This efficient method yielded highly pure and organosoluble dextran esters. The reaction appears highly effective for obtaining higher degrees of substitution (DS) with great efficiency. Under solvent-free conditions, dextran triacetates were efficiently synthesized. It was also observed that the molar ratio can easily control the DS of pendant groups onto the polymer backbone. Hence, a range of products with varying DS were successfully designed, purified and characterized. Covalent attachment of the pendant groups onto the polymer backbone was verified by spectroscopic techniques. Thermogravimetric analysis indicated that the obtained dextran esters were thermally as stable as dextran. The DS of the pendant groups onto the polymer backbone was calculated using standard acid base titration after saponification. Furthermore, all products were thoroughly characterized by thermal analysis (TG and DTG), and FTIR and 1H-NMR spectroscopic analysis.

Characterization of a microsphere formulation containing glucose oxidase and its in vivo efficacy in a murine solid tumor model

PURPOSE

This work focused on the characterization and in vitro/in vivo evaluation of an alginate/chitosan microsphere (ACMS) formulation of glucose oxidase (GOX) for the locoregional delivery of reactive oxygen species for the treatment of solid tumors.

METHODS

The GOX distribution and ACMS composition were determined by confocal laser scanning microscopy and X-ray photoelectron spectroscopy. The mechanism of GOX loading and GOX-polymer interactions were examined with Fourier transform infrared spectroscopy and differential scanning calorimetry. In vitro cytotoxicity and in vivo efficacy of GOX-encapsulated ACMS (ACMS-GOX) were evaluated in EMT6 breast cancer cells and solid tumors.

RESULTS

GOX was loaded into calcium alginate (CaAlg) gel beads via electrostatic interaction and the CaAlg-GOX-chitosan complexation likely stabilized GOX. Higher concentrations of GOX near the surface of ACMS were detected. GOX retained its integrity upon adsorption to CaAlg gel beads during the coating and after release from ACMS. ACMS-GOX exhibited cytotoxicity to the breast cancer cells in vitro and their efficacy increased with increasing incubation time. Intratumorally delivered ACMS-GOX significantly delayed tumor growth with much lower general toxicity than free GOX.

CONCLUSION

The results suggest that the ACMS-GOX formulation has the potential for the intratumoral delivery of therapeutic proteins to treat solid tumors.

New Method to Prepare Mitomycin C Loaded PLA-Nanoparticles with High Drug Entrapment Efficiency

The classical utilized double emulsion solvent diffusion technique for encapsulating water soluble Mitomycin C (MMC) in PLA nanoparticles suffers from low encapsulation efficiency because of the drug rapid partitioning to the external aqueous phase. In this paper, MMC loaded PLA nanoparticles were prepared by a new single emulsion solvent evaporation method, in which soybean phosphatidylcholine (SPC) was employed to improve the liposolubility of MMC by formation of MMC-SPC complex. Four main influential factors based on the results of a single-factor test, namely, PLA molecular weight, ratio of PLA to SPC (wt/wt) and MMC to SPC (wt/wt), volume ratio of oil phase to water phase, were evaluated using an orthogonal design with respect to drug entrapment efficiency. The drug release study was performed in pH 7.2 PBS at 37 degrees C with drug analysis using UV/vis spectrometer at 365 nm. MMC-PLA particles prepared by classical method were used as comparison. The formulated MMC-SPC-PLA nanoparticles under optimized condition are found to be relatively uniform in size (594 nm) with up to 94.8% of drug entrapment efficiency compared to 6.44 mum of PLA-MMC microparticles with 34.5% of drug entrapment efficiency. The release of MMC shows biphasic with an initial burst effect, followed by a cumulated drug release over 30 days is 50.17% for PLA-MMC-SPC nanoparticles, and 74.1% for PLA-MMC particles. The IR analysis of MMC-SPC complex shows that their high liposolubility may be attributed to some weak physical interaction between MMC and SPC during the formation of the complex. It is concluded that the new method is advantageous in terms of smaller size, lower size distribution, higher encapsulation yield, and longer sustained drug release in comparison to classical method.

Doxorubicin-loaded polymeric micelle overcomes multidrug resistance of cancer by double-targeting folate receptor and early endosomal pH

An optimized, pH-sensitive mixed-micelle system conjugated with folic acid is prepared in order to challenge multidrug resistance (MDR) in cancers. The micelles are composed of poly(histidine (His)-co-phenylalanine (Phe))-b-poly(ethylene glycol) (PEG) and poly(L-lactic acid) (PLLA)-b-PEG-folate. Core-forming, pH-sensitive hydrophobic blocks of poly(His-co-Phe) of varying composition are synthesized. The pH sensitivity of the micelles is controlled by the copolymer composition and is fine tuned to early endosomal pH by blending PLLA(3K)-b-PEG(2K)-folate in the presence of a basic anticancer drug, doxorubicin (DOX). In vitro tests are conducted against both wild-type (A2780) and DOX-resistant ovarian carcinoma cell lines. A mixed-micelle system composed of poly(His-co-Phe (16 mole%))-b-PEG (80 wt%) and PLLA-b-PEG-folate (20 wt%) is selected to target early endosomal pH. DOX-loaded micelles effectively kill both wild-type sensitive (A2780) and DOX-resistant ovarian MDR cancer-cell lines (A2780/DOX(R)) through an instantaneous high dose of DOX in the cytosol, which results from active internalization, accelerated DOX release triggered by endosomal pH, and an endosomal membrance disruption.

The grafting and release behavior of doxorubincin from Fe(3)O(4)@SiO(2) core-shell structure nanoparticles via an acid cleaving amide bond: the potential for magnetic targeting drug delivery

Fe(3)O(4)@SiO(2) core-shell structure nanoparticles were first prepared and characterized by TEM, FTIR, XPS and XRD. Subsequently the widely used anticancer agent doxorubincin (DOX) was successfully grafted to the surface of the core-shell nanoparticles via an amide bond with the aid of a spacer arm we synthesized. The spacer arm met two needs: one end can couple to the core-shell nanoparticles' surface while the other end was the active -COOH group, which can react with the -NH(2) group of DOX molecules. The synthesized spacer arm and the conjugation of the drug with nanoparticles through amidation were confirmed by FTIR. The DOX-loading efficiency determined by UV-vis spectrometer was 86.5%. Drug release experiments displayed a pH-dependent behavior that DOX was cleaved from the nanoparticles easily under low pH conditions in the presence of protease and that most of the conjugated doxorubincin were released within the first 12 h. The prepared DOX-grafted Fe(3)O(4)@SiO(2) core-shell structure nanoparticles showed a superparamagnetic property with a saturation magnetization value of 49.3 emu g(-1), indicating a great potential application in the treatment of cancer using magnetic targeting drug-delivery technology.

Enhancement of periodontal tissue regeneration by locally controlled delivery of insulin-like growth factor-I from dextran–co-gelatin microspheres

The present work focused on the design of novel hydrogel microspheres based on both dextran- and gelatin-derived biomaterials, and discussed whether locally controlled delivery of IGF-I from dextran-co-gelatin hydrogel microspheres (DG-MP) was useful for periodontal regeneration enhancement. Microspheres were synthesized when gelatin was cooperating with glycidyl methacrylate (GMA) derivatized dextrans (Dex-GMA) and the resultant DG-MP with a hydrogel character of which the cross-linking density could be controlled by the degree of substitution (DS, the number of methacrylates per 100 glucopyranose residues) of Dex-GMA. In this study, three types of DG-MP (DG-MP4.7, DG-MP6.3 and DG-MP7.8) obtained from gelatin and Dex-GMA (differing in DS: 4.7, 6.3 and 7.8 respectively) were prepared and characterized by swelling and degradation properties, drug release kinetics and biological capability in promoting tissue regeneration. By swelling in aqueous positively charged IGF-I solutions, the protein could be encapsulated in DG-MP by polyionic complexation with negatively charged acidic gelatin. No obvious influence of Dex-GMA's DS on DG-MP's configuration and size was observed, and the release and degraded properties showed no significant difference between three types of DG-MP in PBS buffer either. However, high DS of Dex-GMA could lower microsphere's swelling, prolong its degraded time and minimize IGF-I burst release markedly in dextranase-containing PBS, where IGF-I release from a slow release type of microspheres (DG-MP7.8) could be maintained more than 28 days, and an effective protein release kinetics without a significant burst but a relevantly constant release after the initial burst was achieved. IGF-I in DG-MP resulted in more new bone formation in the periodontal defects within 4 or 8 weeks than IGF-I in blood clot directly did (P < 0.01). The observed newly formation of periodontal tissues including the height and percentage of new bone and new cementum on the denuded root surfaces of the furcation area in DG-MP7.8 group were more than that in other groups (P < 0.05). The adequate width of regenerative periodontal ligament (PDL), regular Sharpey's fibers and alveolar bone reconstruction could be observed only in DG-MP7.8 group. These combined results demonstrate that effective release kinetics can be realized by adjusting the DS of Dex-GMA and followed cross-linking density of DG-MP, and that locally controlled delivery of IGF-I from slow release type of DG-MP may serve as a novel therapeutic strategy for periodontal tissue regeneration.