Fabrication of centimeter-scale and geometrically arbitrary vascular networks using in vitro self-assembly

Stochastic to Deterministic: A straightforward approach to create serially perfusable multiscale capillary beds

Generation of in vitro tissue models with serially perfused hierarchical vasculature would allow greater control of fluid perfusion throughout the network and enable direct mechanistic investigation of vasculogenesis, angiogenesis, and vascular remodeling. In this work, we have developed a method to produce a closed, serially perfused, multiscale vessel network embedded within an acellular hydrogel. We confirmed that the acellular and cellular gel-gel interface was functionally annealed without preventing or biasing cell migration and endothelial self-assembly. Multiscale connectivity of the vessel network was validated via high-resolution microscopy techniques to confirm anastomosis between self-assembled and patterned vessels. Lastly, using fluorescently labeled microspheres, the multiscale network was serially perfused to confirm patency and barrier function. Directional flow from inlet to outlet man-dated flow through the capillary bed. This method for producing closed, multiscale vascular networks was developed with the intention of straightforward fabrication and engineering techniques so as to be a low barrier to entry for researchers who wish to investigate mechanistic questions in vascular biology. This ease of use offers a facile extension of these methods for incorporation into organoid culture, organ-on-a-chip (OOC) models, and bioprinted tissues.

A straightforward cell culture insert model to incorporate biochemical and biophysical stromal properties into transplacental transport studies

Introduction

The placental extracellular matrix (ECM) dynamically remodels over pregnancy and in disease. How these changes impact placental barrier function is poorly understood as there are limited in vitro models of the placenta with a modifiable stromal compartment to mechanistically investigate these extracellular factors. We developed a straightforward method to incorporate uniform hydrogels into standard cell culture inserts for transplacental transport studies.

Methods

Uniform polyacrylamide (PAA) gels were polymerized within cell culture inserts by (re)using the insert packaging to create a closed, controllable environmental chamber. PAA pre-polymer solution was added dropwise via a syringe to the cell culture insert and the atmosphere was purged with an inert gas. Transport and cell culture studies were conducted to validate the model.

Results

We successfully incorporated and ECM functionalized uniform PAA gels to cell culture inserts enable cell adhesion and monolayer formation. Imaging and analyte transport studies validated gel formation and expected mass transport results and successful cell studies confirmed cell viability, monolayer formation, and that the model could be used transplacental transport studies. Detailed methods and validation protocols are included.

Discussion

It is well appreciated that ECM biophysical and biochemical properties impact cell phenotype and cell signaling in many tissues including the placenta. The incorporation of a PAA gel within a cell culture insert enables independent study of placental ECM biophysical and biochemical properties in the context of transplacental transport. These straightforward and low-cost methods to build three dimensional cellular models are readily adoptable by the wider scientific community.

Technique for rapidly forming networks of microvessel-like structures

Modelling organ-blood barriers through the inclusion of microvessel networks within in vitro tissue models could lead to more physiologically accurate results, especially since organ-blood barriers are crucial to the normal function, drug transport, and disease states of vascularized organs. Microvessel networks are difficult to form, since they push the practical limit of most fabrication methods, and it is difficult to coax vascular cells to self-assemble into structures larger than capillaries. Here we present a method for rapidly forming networks of microvessel-like structures using sacrificial, alginate structures. Specifically, we encapsulated endothelial cells within short alginate threads, then embedded them in collagen gel. Following enzymatic degradation of the alginate, the collagen gel contained a network of hollow channels seeded with cells, all surrounding a perfusable central channel. This method uses a 3D printed coaxial extruder and syringe pumps to generate short threads in a way that is repeatable and easily transferrable to other labs. The cell-laden, sacrificial alginate threads can be frozen after fabrication and thawed before embedding without significant loss of cell viability. The ability to freeze the threads enables future scale up and ease of use. Within millifluidic devices that restrict access to media, the threads enhance cell survival under static conditions. These results indicate the potential for use of this method in a range of tissue engineering applications.

New Insights and Advanced Strategies for In Vitro Construction of Vascularized Tissue Engineering

Inadequate vascularization is a significant barrier to clinical application of large-volume tissue engineered grafts. In contrast to in vivo vascularization, in vitro prevascularization shortens the time required for host vessels to grow into the graft core and minimizes necrosis in the core region of the graft. However, the challenge of prevascularization is to construct hierarchical perfusable vascular networks, increase graft volume, and form a vascular tip that can anastomose with host vessels. Understanding advances in in vitro prevascularization techniques and new insights into angiogenesis could overcome these obstacles. In the present review, we discuss new perspectives on angiogenesis, the differences between in vivo and in vitro tissue vascularization, the four elements of prevascularized constructs, recent advances in perfusion-based in vitro prevascularized tissue fabrication, and prospects for large-volume prevascularized tissue engineering.

In vitro formation and extended culture of highly metabolically active and contractile tissues

3D cell culture models have gained popularity in recent years as an alternative to animal and 2D cell culture models for pharmaceutical testing and disease modeling. Polydimethylsiloxane (PDMS) is a cost-effective and accessible molding material for 3D cultures; however, routine PDMS molding may not be appropriate for extended culture of contractile and metabolically active tissues. Failures can include loss of culture adhesion to the PDMS mold and limited culture surfaces for nutrient and waste diffusion. In this study, we evaluated PDMS molding materials and surface treatments for highly contractile and metabolically active 3D cell cultures. PDMS functionalized with polydopamine allowed for extended culture duration (14.8 ± 3.97 days) when compared to polyethylamine/glutaraldehyde functionalization (6.94 ± 2.74 days); Additionally, porous PDMS extended culture duration (16.7 ± 3.51 days) compared to smooth PDMS (6.33 ± 2.05 days) after treatment with TGF-β2 to increase culture contraction. Porous PDMS additionally allowed for large (13 mm tall × 8 mm diameter) constructs to be fed by diffusion through the mold, resulting in increased cell density (0.0210 ± 0.0049 mean nuclear fraction) compared to controls (0.0045 ± 0.0016 mean nuclear fraction). As a practical demonstration of the flexibility of porous PDMS, we engineered a vascular bioartificial muscle model (VBAM) and demonstrated extended culture of VBAMs anchored with porous PDMS posts. Using this model, we assessed the effect of feeding frequency on VBAM cellularity. Feeding 3×/week significantly increased nuclear fraction at multiple tissue depths relative to 2×/day. VBAM maturation was similarly improved in 3×/week feeding as measured by nuclear alignment (23.49° ± 3.644) and nuclear aspect ratio (2.274 ± 0.0643) relative to 2x/day (35.93° ± 2.942) and (1.371 ± 0.1127), respectively. The described techniques are designed to be simple and easy to implement with minimal training or expense, improving access to dense and/or metabolically active 3D cell culture models.

Rapid magnetically directed assembly of pre-patterned capillary-scale microvessels

Capillary scale vascularization is critical to the survival of engineered 3D tissues and remains an outstanding challenge for the field of tissue engineering. Current methods to generate micro-scale vasculature such as 3D printing, two photon hydrogel ablation, angiogenesis, and vasculogenic assembly face challenges in rapidly creating organized, highly vascularized tissues at capillary length-scales. Within metabolically demanding tissues, native capillary beds are highly organized and densely packed to achieve adequate delivery of nutrients and oxygen and efficient waste removal. Here, we adopt two existing techniques to fabricate lattices composed of sacrificial microfibers that can be efficiently and uniformly seeded with endothelial cells (ECs) by magnetizing both lattices and ECs. Ferromagnetic microparticles (FMPs) were incorporated into microfibers produced by solution electrowriting (SEW) and fiber electropulling (FEP). By loading ECs with superparamagnetic iron oxide nanoparticles (SPIONs), the cells could be seeded onto magnetized microfiber lattices. Following encapsulation in a hydrogel, the capillary templating lattice was selectively degraded by a bacterial lipase that does not impact mammalian cell viability or function. This work introduces a novel approach to rapidly producing organized capillary networks within metabolically demanding engineered tissue constructs which should have broad utility for the fields of tissue engineering and regenerative medicine.

A Large-format Polyacrylamide Gel with Controllable Matrix Mechanics for Mammalian Cell Culture and Conditioned Media Production

Tissue culture plastic has been used for routine cell culture and in vitro experiments for over 50 years. However, cells are mechanically responsive and behave differently on hard surfaces than they do on softer substrates. Polyacrylamide gels have become a popular hydrogel of choice for controlling surface stiffness and ligand density for cell adhesion. Many synthesis methods use coverslips and small gel surface areas for cell culture, which are amenable to microscopy-based experiments. However, none of the currently published methods can be scaled up to increase the surface area to accommodate conditioned media production, high volume analyte collection, or cell line expansion. To overcome this size limitation, we developed a protocol for synthesizing polyacrylamide in glass dishes using commercially available materials. This enables routine cell culture on soft surfaces and facilitates experiments that require large amounts of analyte, especially studies involving extracellular vesicles and secreted factors.

Bioengineering of High Cell Density Tissues with Hierarchical Vascular Networks for Ex Vivo Whole Organs

The development of tissue-like structures such as cell sheets, spheroids, and organoids has contributed to progress in regenerative medicine. Simultaneous achievement of scale up and high cell density of these tissues is challenging because sufficient oxygen cannot be supplied to the inside of large, high cell density tissues. Here, in vitro fabrication of vessels to supply oxygen to the inside of millimeter-sized scaffold-free tissues whose cell density is ≈200 million cells mL^-1 , corresponding to those of native tissues, is shown. Hierarchical vascular networks by anastomosis of capillaries and a large vessel are essential for oxygen supply, whereas a large vessel or capillary networks alone make negligible contributions to the supply. The hierarchical vascular networks are formed by a top-down approach, which offers a new option for ex vivo whole organs without decellularization and 3D-bioprinting.

Sex-related external factors influence pulmonary vascular angiogenesis in a sex-dependent manner

Bronchopulmonary dysplasia (BPD) is a disease with a significant sexual dimorphism where males have a disadvantage compared with their female counterparts. Although mechanisms behind this sexual dimorphism are poorly understood, sex differences in angiogenesis have been identified as one possible source of the male disadvantage in BPD. Pulmonary angiogenesis was assessed in vitro using a bead sprouting assay with pooled male or female human pulmonary microvascular endothelial cells (HPMECs, 18-19 wk gestation, canalicular stage of human lung development) in standard (sex-hormone containing) and hormone-stripped medium. We identified sex-specific phenotypes in angiogenesis where male HPMECs produce fewer but longer sprouts compared with female HPMECs. The presence of sex hormones from standard culture medium modifies the male HPMEC phenotype with shorter and fewer sprouts but does not influence the female phenotype. Using a conditioned medium model, we further characterized the influence of the sex-specific secretome. Male and female HPMECs secrete factors that increase the maximum length of sprouts in female, but not male HPMECs. The presence of sex hormones abolishes this response. The male HPMEC secretome inhibits angiogenic sprouting in male HPMECs in the absence of sex hormones. Taken together, these results demonstrate that the pulmonary endothelial cell phenotypes are influenced by sex hormones and sex-specific secreted factors in a sex-dependent manner.NEW & NOTEWORTHY We identified a sex-specific phenotype wherein male HPMECs produce fewer but longer sprouts than females. Surprisingly, the presence of sex hormones only modifies the male phenotype, resulting in shorter and even fewer sprouts. Furthermore, we found the sex-specific secretome has a sex-dependent influence on angiogenesis that is also sex-hormone sensitive. These new and surprising findings point to the unappreciated role of sex and sex-related exogenous factors in early developmental angiogenesis.

Lung Development in a Dish: Models to Interrogate the Cellular Niche and the Role of Mechanical Forces in Development

Over the past decade, emphasis has been placed on recapitulating in vitro the architecture and multicellular interactions found in organs in vivo [1, 2]. Whereas traditional reductionist approaches to in vitro models enable teasing apart the precise signaling pathways, cellular interactions, and response to biochemical and biophysical cues, model systems that incorporate higher complexity are needed to ask questions about physiology and morphogenesis at the tissue scale. Significant advancements have been made in establishing in vitro models of lung development to understand cell-fate specification, gene regulatory networks, sexual dimorphism, three-dimensional organization, and how mechanical forces interact to drive lung organogenesis [3-5]. In this chapter, we highlight recent advances in the rapid development of various lung organoids, organ-on-a-chip models, and whole lung ex vivo explant models currently used to dissect the roles of these cellular signals and mechanical cues in lung development and potential avenues for future investigation (Fig. 3.1).

Development of a Vascularized Human Skin Equivalent with Hypodermis for Photoaging Studies

Photoaging is an important extrinsic aging factor leading to altered skin morphology and reduced function. Prior work has revealed a connection between photoaging and loss of subcutaneous fat. Currently, primary models for studying this are in vivo (human samples or animal models) or in vitro models, including human skin equivalents (HSEs). In vivo models are limited by accessibility and cost, while HSEs typically do not include a subcutaneous adipose component. To address this, we developed an "adipose-vascular" HSE (AVHSE) culture method, which includes both hypodermal adipose and vascular cells. Furthermore, we tested AVHSE as a potential model for hypodermal adipose aging via exposure to 0.45 ± 0.15 mW/cm² 385 nm light (UVA). One week of 2 h daily UVA exposure had limited impact on epidermal and vascular components of the AVHSE, but significantly reduced adiposity by approximately 50%. Overall, we have developed a novel method for generating HSE that include vascular and adipose components and demonstrated potential as an aging model using photoaging as an example.

Secretion of the disulfide bond generating catalyst QSOX1 from pancreatic tumor cells into the extracellular matrix: association with extracellular vesicles and matrix proteins

Quiescin sulfhydryl oxidase 1 (QSOX1) is a disulfide bond generating catalyst that is overexpressed in solid tumors. Expression of QSOX1 is linked to cancer cell invasion, tumor grade, and extracellular matrix (ECM) protein deposition. While the secreted version of QSOX1 is known to be present in various fluids and secretory tissues, its presence in the ECM of cancer is less understood. To characterize secreted QSOX1, we separated conditioned media based on size and density. We discovered that the majority of secreted QSOX1 resides in the EV-depleted fraction and in the soluble protein fraction. Very little QSOX1 could be detected in the EVP fraction. We used immunofluorescence to image subpopulations of EVs and found QSOX1 in Golgi-derived vesicles and medium/large vesicles, but in general, most extracellular QSOX1 was not attributed to these vesicles. Next, we quantified QSOX1 co-localization with the EV marker Alix. For the medium/large EVs, ~98% contained QSOX1 when fibronectin was used as a coating. However, on collagen coatings, only ~60% of these vesicles contained QSOX1, suggesting differences in EV cargo based on ECM coated surfaces. About 10% of small EVs co-localized with QSOX1 on every ECM protein surface except for collagen (0.64%). We next investigated adhesion of QSOX1 to ECM proteins in vitro and in situ and found that QSOX1 preferentially adheres to fibronectin, laminins, and Matrigel compared to gelatin and collagen. This mechanism was found to be, in part, mediated by the formation of mixed disulfides between QSOX1 and cysteine-rich ECM proteins. In summary, we found that QSOX1 (1) is in subpopulations of medium/large EVs, (2) seems to interact with small Alix+ EVs, and (3) adheres to cysteine-rich ECM proteins, potentially through the formation of intermediate disulfides. These observations offer significant insight into how enzymes, such as QSOX1, can facilitate matrix remodeling events in solid tumor progression.

An Updated Review on EPR-Based Solid Tumor Targeting Nanocarriers for Cancer Treatment

Simple Summary

One of the important efforts in the treatment of cancers is to achieve targeted drug delivery by nanocarriers to be more effective and reduce adverse effects. However, due to the adverse responses of nanocarriers in clinical trials due to the very weak EPR effects, doubts have been raised in this regard. In this study, an attempt has been made to take a critical look at EPR approaches to enable the convergence of previous papers and the EPR critics to reach an appropriate therapeutic path. Although the effectiveness of EPR is highly variable due to the complex microenvironment of the tumor, there is high hope for cancer treatment by describing new strategies to overcome the challenges of EPR effect. Furthermore, in this paper an attempt was made to provide a reliable path for future to develop cancer therapeutics based on EPR effect.

Abstract

The enhanced permeability and retention (EPR) effect in cancer treatment is one of the key mechanisms that enables drug accumulation at the tumor site. However, despite a plethora of virus/inorganic/organic-based nanocarriers designed to rely on the EPR effect to effectively target tumors, most have failed in the clinic. It seems that the non-compliance of research activities with clinical trials, goals unrelated to the EPR effect, and lack of awareness of the impact of solid tumor structure and interactions on the performance of drug nanocarriers have intensified this dissatisfaction. As such, the asymmetric growth and structural complexity of solid tumors, physicochemical properties of drug nanocarriers, EPR analytical combination tools, and EPR description goals should be considered to improve EPR-based cancer therapeutics. This review provides valuable insights into the limitations of the EPR effect in therapeutic efficacy and reports crucial perspectives on how the EPR effect can be modulated to improve the therapeutic effects of nanomedicine.

Artificial engineering of the protein corona at bio-nano interfaces for improved cancer-targeted nanotherapy

Nanoparticles (NPs) have been demonstrated in numerous applications as anticancer, antibacterial and antioxidant agents. Artificial engineering of protein interactions with NPs in biological systems is crucial to develop potential NPs for drug delivery and cancer nanotherapy. The protein corona (PC) on the NP surface, displays an interface between biomacromolecules and NPs, governing their pharmacokinetics and pharmacodynamics. Upon interaction of proteins with the NP surface, their surface features are modified and they can easily be removed from the circulation by the mononuclear phagocytic system (MPS). PC properties heavily depend on the biological microenvironment and NP surface physicochemical parameters. Based on this context, we have surveyed different approaches that have been used for artificial engineering of the PC composition on NP surfaces. We discuss the effects of NP size, shape, surface modifications (PEGylation, self-peptide, other polymers), and protein pre-coating on the PC properties. Additionally, other factors including protein source and structure, intravenous injection and the subsequent shear flow, plasma protein gradients, temperature and local heat transfer, and washing media are considered in the context of their effects on the PC properties and overall target cellular effects. Moreover, the effects of NP-PC complexes on cancer cells based on cellular interactions, organization of intracellular PC (IPC), targeted drug delivery (TDD) and regulation of burst drug release profile of nanoplatforms, enhanced biocompatibility, and clinical applications were discussed followed by challenges and future perspective of the field. In conclusion, this paper can provide useful information to manipulate PC properties on the NP surface, thus trying to provide a literature survey to shorten their shipping from preclinical to clinical trials and to lay the basis for a personalized PC.

A micro-channel array in a tissue engineered vessel graft guides vascular morphogenesis for anastomosis with self-assembled vascular networks

Vascularization of 3D engineered tissues poses a great challenge in the field of tissue engineering. One promising approach for vascularizing engineered tissue is cocultivation with endothelial cells (ECs), which spontaneously self-assemble into a natural capillary network in the presence of supportive cells. However, the ECs do not self-assemble according to physiological hierarchy which is required to support blood supply. This work describes the design and fabrication of an AngioTube, a biodegradable engineered macro-vessel surrounded by cylindrical micro-channel array, which is designed to support physiological flow distribution and enable the integration with living capillaries. The well-defined geometry of the engineered micro-channels guides endothelial cells to form patent micro-vessels which sprouted in accordance with the channel orientation. Three different in-vitro models were used to demonstrate anastomosis of these engineered micro-vessels with self-assembled vascular networks. Finally, in-vivo functionality was demonstrated by direct anastomosis with the femoral artery in a rat hindlimb model. This unique approach proposes a new micro-fabrication strategy which introduces uncompromised micro-fluidic device geometrical accuracy at the tissue-scale level. STATEMENT OF SIGNIFICANCE: This study proposes a micro-fabrication strategy suitable for processing real-scale cylindrical implants with very high accuracy, which will enable translation of the high-resolution geometry of micro-fluidic devices to clinically relevant implants containing functional multi-scale vascular networks. Moreover, this approach promises to advance the field of tissue engineering by opening new opportunities to explore the impact of well controlled and uncompromised 3D micro-geometry on cellular behavior.

Bioprinting and plastic compression of large pigmented and vascularized human dermo-epidermal skin substitutes by means of a new robotic platform

Extensive availability of engineered autologous dermo-epidermal skin substitutes (DESS) with functional and structural properties of normal human skin represents a goal for the treatment of large skin defects such as severe burns. Recently, a clinical phase I trial with this type of DESS was successfully completed, which included patients own keratinocytes and fibroblasts. Yet, two important features of natural skin were missing: pigmentation and vascularization. The first has important physiological and psychological implications for the patient, the second impacts survival and quality of the graft. Additionally, accurate reproduction of large amounts of patient’s skin in an automated way is essential for upscaling DESS production. Therefore, in the present study, we implemented a new robotic unit (called SkinFactory) for 3D bioprinting of pigmented and pre-vascularized DESS using normal human skin derived fibroblasts, blood- and lymphatic endothelial cells, keratinocytes, and melanocytes. We show the feasibility of our approach by demonstrating the viability of all the cells after printing in vitro, the integrity of the reconstituted capillary network in vivo after transplantation to immunodeficient rats and the anastomosis to the vascular plexus of the host. Our work has to be considered as a proof of concept in view of the implementation of an extended platform, which fully automatize the process of skin substitution: this would be a considerable improvement of the treatment of burn victims and patients with severe skin lesions based on patients own skin derived cells.

Priming stroma with a vitamin D analog to optimize viroimmunotherapy for pancreatic cancer

Pancreatic cancer resistance to immunotherapies is partly due to deficits in tumor-infiltrating immune cells and stromal density. Combination therapies that modify stroma and recruit immune cells are needed. Vitamin D analogs such as calcipotriol (Cal) decrease fibrosis in pancreas stroma, thus allowing increased chemotherapy delivery. OVs infect, replicate in, and kill cancer cells and recruit immune cells to immunodeficient microenvironments. We investigated whether stromal modification with Cal would enhance oncolytic viroimmunotherapy using recombinant orthopoxvirus, CF33. We assessed effect of Cal on CF33 replication using pancreas ductal adenocarcinoma (PDAC) cell lines and in vivo flank orthotopic models. Proliferation assays showed that Cal did not alter viral replication. Less replication was seen in cell lines whose division was slowed by Cal, but this appeared proportional to cell proliferation. Three-dimensional in vitro models demonstrated decreased myofibroblast integrity after Cal treatment. Cal increased vascular lumen size and immune cell infiltration in subcutaneous models of PDAC and increased viral delivery and replication. Cal plus serial OV dosing in the syngeneic Pan02 model caused more significant tumor abrogation than other treatments. Cal-treated tumors had less dense fibrosis, enhanced immune cell infiltration, and decreased T cell exhaustion. Calcipotriol is a possible adjunct for CF33-based oncolytic viroimmunotherapy against PDAC.

Development and Characterization of Gelatin-Norbornene Bioink to Understand the Interplay between Physical Architecture and Micro-Capillary Formation in Biofabricated Vascularized Constructs

The principle challenge for engineering viable, cell-laden hydrogel constructs of clinically-relevant size, is rapid vascularization, in order to moderate the finite capacity of passive nutrient diffusion. A multiscale vascular approach, with large open channels and bulk microcapillaries may be an admissible approach to accelerate this process, promoting overall pre-vascularization for long-term viability of constructs. However, the limited availability of bioinks that possess suitable characteristics that support both fabrication of complex architectures and formation of microcapillaries, remains a barrier to advancement in this space. In this study, gelatin-norbornene (Gel-NOR) is investigated as a vascular bioink with tailorable physico-mechanical properties, which promoted the self-assembly of human stromal and endothelial cells into microcapillaries, as well as being compatible with extrusion and lithography-based biofabrication modalities. Gel-NOR constructs containing self-assembled microcapillaries are successfully biofabricated with varying physical architecture (fiber diameter, spacing, and orientation). Both channel sizes and cell types affect the overall structural changes of the printed constructs, where cross-signaling between both human stromal and endothelial cells may be responsible for the reduction in open channel lumen observed over time. Overall, this work highlights an exciting three-way interplay between bioink formulation, construct design, and cell-mediated response that can be exploited towards engineering vascular tissues.

Effect of Pore Size of Honeycomb-Patterned Polymer Film on Spontaneous Formation of 2D Micronetworks by Coculture of Human Umbilical Vein Endothelial Cells and Mesenchymal Stem Cells

The geometrical control of micronetwork structures ( μ NSs) formed by endothelial cells is an important topic in tissue engineering, cell-based assays, and fundamental biological studies. In this study, μ NSs are formed using human umbilical vein endothelial cells (HUVECs) by the coculture of HUVECs and human mesenchymal stem cells (MSCs) confined in a honeycomb-patterned poly-l-lactic acid film (honeycomb film (HCF)), which is a novel cell culture scaffold. The HCF is produced using the breath figure method, which uses condensed water droplets as pore templates. The confinement of the HUVECs and MSCs in the HCF along with the application of centrifugal force results in μ NS formation when the pore size is more than 20  μ m. Furthermore, μ NS development is geometrically restricted by the hexagonally packed and connected pores in the horizontal direction of the HCF. Network density is also controlled by changing the seeding density of the HUVECs and MSCs. The threshold pore size indicates that μ NSs can be formed spontaneously by using an HCF with a perfectly uniform porous structure. This result provides an important design guideline for the structure of porous cell culture scaffolds by applying a blood vessel model in vitro.

Phototunable interpenetrating polymer network hydrogels to stimulate the vasculogenesis of stem cell-derived endothelial progenitors

Vascularization of engineered scaffolds remains a critical obstacle hindering the translation of tissue engineering from the bench to the clinic. We previously demonstrated the robust micro-vascularization of collagen hydrogels with induced pluripotent stem cell (iPSC)-derived endothelial progenitors; however, physically cross-linked collagen hydrogels compact rapidly and exhibit limited strength. We have synthesized an interpenetrating polymer network (IPN) hydrogel comprised of collagen and norbornene-modified hyaluronic acid (NorHA) to address these challenges. This dual-network hydrogel combines the natural cues presented by collagen's binding sites and extracellular matrix (ECM)-mimicking fibrous architecture with the in situ modularity and chemical cross-linking of NorHA. We modulated the IPN hydrogel's stiffness and degradability by varying the concentration and sequence, respectively, of the NorHA peptide cross-linker. Rheological characterization of the photo-mediated gelation process revealed that the IPN hydrogel's stiffness increased with cross-linker concentration and was decoupled from the bulk NorHA content. Conversely, the swelling of the IPN hydrogel decreased linearly with increasing cross-linker concentration. Collagen microarchitecture remained relatively unchanged across cross-linking conditions, although the addition of NorHA delayed collagen fibrillogenesis. Upon iPSC-derived endothelial progenitor encapsulation, robust, lumenized microvascular networks developed in IPN hydrogels over two weeks. Subsequent computational analysis showed that an initial rise in stiffness increased the number of branch points and vessels, but vascular growth was suppressed in high stiffness IPN hydrogels. These results suggest that an IPN hydrogel consisting of collagen and NorHA is highly tunable, compaction resistant, and capable of supporting vasculogenesis.

Assessment of fibrin-collagen co-gels for generating microvesselsex vivousing endothelial cell-lined microfluidics and multipotent stromal cell (MSC)-induced capillary morphogenesis

One aspect of the challenge of engineering viable tissues ex vivo is the generation of perfusable microvessels of varying diameters. In this work, we take the approach of using hydrogel-based microfluidics seeded with endothelial cells (ECs) to form small artery/vein-like vessels, in conjunction with using the self-assembly behavior of ECs to form capillary-like vessels when co-cultured with multipotent stromal cells (MSCs). In exploring this approach, we focused on investigating collagen, fibrin, and various collagen-fibrin co-gel formulations for their potential suitability as serving as scaffold materials by surveying their angiogencity and mechanical properties. Fibrin and co-gels successfully facilitated multicellular EC sprouting, whereas collagen elicited a migration response of individual ECs, unless supplemented with the PKC (protein kinase C)-activator, phorbol 12-myristate 13-acetate. Collagen scaffolds were also found to severely contract when embedded with mesenchymal cells, but this contraction could be abrogated with the addition of fibrin. Increasing collagen content within co-gel formulations, however, imparted a higher compressive modulus and allowed for the reliable formation of intact hydrogel-based microchannels which could then be perfused. Given the bioactivity and mechanical benefits of fibrin and collagen, respectively, collagen-fibrin co-gels are a promising scaffold option for generating vascularized tissue constructs.

A Microfluidic System to Measure Neonatal Lung Compliance Over Late Stage Development as a Functional Measure of Lung Tissue Mechanics

Premature birth interrupts the development of the lung, resulting in functional deficiencies and the onset of complex pathologies, like bronchopulmonary dysplasia (BPD), that further decrease the functional capabilities of the immature lung. The dysregulation of molecular targets has been implicated in the presentation of BPD, but there is currently no method to correlate resultant morphological changes observed in tissue histology with these perturbations to differences in function throughout saccular and alveolar lung development. Lung compliance is an aggregate measure of the lung's mechanical properties that is highly sensitive to a number of molecular, cellular, and architectural characteristics, but little is known about compliance in the neonatal mouse lung due to measurement challenges. We have developed a novel method to quantify changes in lung volume and pressure to determine inspiratory and expiratory compliance throughout neonatal mouse lung development. The compliance measurements obtained were validated against compliance values from published studies using mature lungs following enzymatic degradation of the extracellular matrix (ECM). The system was then used to quantify changes in compliance that occurred over the entire span of neonatal mouse lung development. These methods fill a critically important gap connecting powerful mouse models of development and disease to measures of functional lung mechanics critical to respiration and enable insights into the genetic, molecular, and cellular underpinnings of BPD pathology to improve lung function in premature infants.

Significant Unresolved Questions and Opportunities for Bioengineering in Understanding and Treating COVID-19 Disease Progression

COVID-19 is a disease that manifests itself in a multitude of ways across a wide range of tissues. Many factors are involved, and though impressive strides have been made in studying this novel disease in a very short time, there is still a great deal that is unknown about how the virus functions. Clinical data has been crucial for providing information on COVID-19 progression and determining risk factors. However, the mechanisms leading to the multi-tissue pathology are yet to be fully established. Although insights from SARS-CoV-1 and MERS-CoV have been valuable, it is clear that SARS-CoV-2 is different and merits its own extensive studies. In this review, we highlight unresolved questions surrounding this virus including the temporal immune dynamics, infection of non-pulmonary tissue, early life exposure, and the role of circadian rhythms. Risk factors such as sex and exposure to pollutants are also explored followed by a discussion of ways in which bioengineering approaches can be employed to help understand COVID-19. The use of sophisticated in vitro models can be employed to interrogate intercellular interactions and also to tease apart effects of the virus itself from the resulting immune response. Additionally, spatiotemporal information can be gleaned from these models to learn more about the dynamics of the virus and COVID-19 progression. Application of advanced tissue and organ system models into COVID-19 research can result in more nuanced insight into the mechanisms underlying this condition and elucidate strategies to combat its effects.

Engineering functional microvessels in synthetic polyurethane random-pore scaffolds by harnessing perfusion flow

Recently reported biomaterial-based approaches toward prevascularizing tissue constructs rely on biologically or structurally complex scaffolds that are complicated to manufacture and sterilize, and challenging to customize for clinical applications. In the current work, a prevascularization method for soft tissue engineering that uses a non-patterned and non-biological scaffold is proposed. Human fibroblasts and HUVECs were seeded on an ionomeric polyurethane-based hydrogel and cultured for 14 days under medium perfusion. A flow rate of 0.05 mL/min resulted in a greater lumen density in the constructs relative to 0.005 and 0.5 mL/min, indicating the critical importance of flow magnitude in establishing microvessels. Constructs generated at 0.05 mL/min perfusion flow were implanted in a mouse subcutaneous model and intravital imaging was used to characterize host blood perfusion through the construct after 2 weeks. Engineered microvessels were functional (i.e. perfused with host blood and non-leaky) and neovascularization of the construct by host vessels was enhanced relative to non-prevascularized constructs. We report on the first strategy toward engineering functional microvessels in a tissue construct using non-bioactive, non-patterned synthetic polyurethane materials.

Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology

The vascular system is integral for maintaining organ-specific functions and homeostasis. Dysregulation in vascular architecture and function can lead to various chronic or acute disorders. Investigation of the role of the vascular system in health and disease has been accelerated through the development of tissue-engineered constructs and microphysiological on-chip platforms. These in vitro systems permit studies of biochemical regulation of vascular networks and parenchymal tissue and provide mechanistic insights into the biophysical and hemodynamic forces acting in organ-specific niches. Detailed understanding of these forces and the mechanotransductory pathways involved is necessary to develop preventative and therapeutic strategies targeting the vascular system. This review describes vascular structure and function, the role of hemodynamic forces in maintaining vascular homeostasis, and measurement approaches for cell and tissue level mechanical properties influencing vascular phenomena. State-of-the-art techniques for fabricating in vitro microvascular systems, with varying degrees of biological and engineering complexity, are summarized. Finally, the role of vascular mechanobiology in organ-specific niches and pathophysiological states, and efforts to recapitulate these events using in vitro microphysiological systems, are explored. It is hoped that this review will help readers appreciate the important, but understudied, role of vascular-parenchymal mechanotransduction in health and disease toward developing mechanotherapeutics for treatment strategies.

De novo lung biofabrication: clinical need, construction methods, and design strategy

Chronic lung disease is the 4th leading cause of death in the United States. Due to a shortage of donor lungs, alternative approaches to support failing, native lungs have been attempted, including mechanical ventilation and various forms of artificial lungs. However, each of these support methods causes significant complications when used for longer than a few days and are thus not capable of long-term support. For artificial lungs, complications arise due to interactions between the artificial materials of the device and the blood of the recipient. A potential new approach is the fabrication of lungs from biological materials, such that the gas exchange membranes provide a more biomimetic blood-contacting interface. Recent advancements with three-dimensional, soft-tissue biofabrication methods and the engineering of thin, basement membranes demonstrate the potential of fabricating a lung scaffold from extracellular matrix materials. This scaffold could then be seeded with endothelial and epithelial cells, matured within a bioreactor, and transplanted. In theory, this fully biological lung could provide improved, long-term biocompatibility relative to artificial lungs, but significant work is needed to perfect the organ design and construction methods. Like artificial lungs, biofabricated lungs do not need to follow the shape and structure of a native lung, allowing for simpler manufacture. However, various functional requirements must still be met, including stable, efficient gas exchange for a period of years. Design decisions depend on the disease state, how the organ is implanted, and the latest biofabrication methods available in a rapidly evolving field.

Generation and morphological quantification of large scale, three-dimensional, self-assembled vascular networks

One of the largest issues facing the field of tissue engineering is scaling due to tissue necrosis as a result of a lack of vascularization. We have developed an accessible method for generating large scale vascular networks of arbitrary geometries through the self-assembly of endothelial cells in a collagen gel, similar to vasculogenesis that occurs in the developing embryo. This system can be applied to a wide range of collagen concentrations and seeding densities, resulting in networks of varying phenotypes, lending itself to the recapitulation of vascular networks that mimic those found across different tissues. Methods are thus described for the generation and imaging of these self-assembled three-dimensional networks in addition to image processing methods for rigorous quantitative measurement of various morphological parameters. There are several advantages to the system described herein.

•

Varied molding procedures allow for irregular geometries, similar to those that would be required for tissue grafts.

•

Robust network formation translates into centimeter scale constructs.

•

Whereas similar processes suffer from a high degree of variability and inconsistent characterization, our method employs image analysis techniques to stringently characterize each network based on several objective characteristics.