Isolation of palm oil-utilising, polyhydroxyalkanoate (PHA)-producing bacteria by an enrichment technique

Efficient production of polyhydroxybutyrate using lignocellulosic biomass derived from oil palm trunks by the inhibitor-tolerant strain Burkholderia ambifaria E5-3

Lignocellulosic biomass is a valuable, renewable substrate for the synthesis of polyhydroxybutyrate (PHB), an ecofriendly biopolymer. In this study, bacterial strain E5-3 was isolated from soil in Japan; it was identified as Burkholderia ambifaria strain E5-3 by 16 S rRNA gene sequencing. The strain showed optimal growth at 37 °C with an initial pH of 9. It demonstrated diverse metabolic ability, processing a broad range of carbon substrates, including xylose, glucose, sucrose, glycerol, cellobiose, and, notably, palm oil. Palm oil induced the highest cellular growth, with a PHB content of 65% wt. The strain exhibited inherent tolerance to potential fermentation inhibitors derived from lignocellulosic hydrolysate, withstanding 3 g/L 5-hydroxymethylfurfural and 1.25 g/L acetic acid. Employing a fed-batch fermentation strategy with a combination of glucose, xylose, and cellobiose resulted in PHB production 2.7-times that in traditional batch fermentation. The use of oil palm trunk hydrolysate, without inhibitor pretreatment, in a fed-batch fermentation setup led to significant cell growth with a PHB content of 45% wt, equivalent to 10 g/L. The physicochemical attributes of xylose-derived PHB produced by strain E5-3 included a molecular weight of 722 kDa, a number-average molecular weight of 191 kDa, and a polydispersity index of 3.78. The amorphous structure of this PHB displayed a glass transition temperature of 4.59 °C, while its crystalline counterpart had a melting point of 171.03 °C. This research highlights the potential of lignocellulosic feedstocks, especially oil palm trunk hydrolysate, for PHB production through fed-batch fermentation by B. ambifaria strain E5-3, which has high inhibitor tolerance.

Exploring polyhydroxyalkanoates biosynthesis using hydrocarbons as carbon source: a comprehensive review

Environmental pollution caused by petrochemical hydrocarbons (HC) and plastic waste is a pressing global challenge. However, there is a promising solution in the form of bacteria that possess the ability to degrade HC, making them valuable tools for remediating contaminated environments and effluents. Moreover, some of these bacteria offer far-reaching potential beyond bioremediation, as they can also be utilized to produce polyhydroxyalkanoates (PHAs), a common type of bioplastics. The accumulation of PHAs in bacterial cells is facilitated in environments with high C/N or C/P ratio, which are often found in HC-contaminated environments and effluents. Consequently, some HC-degrading bacteria can be employed to simultaneously produce PHAs and conduct biodegradation processes. Although bacterial bioplastic production has been thoroughly studied, production costs are still too high compared to petroleum-derived plastics. This article aims to provide a comprehensive review of recent scientific advancements concerning the capacity of HC-degrading bacteria to produce PHAs. It will delve into the microbial strains involved and the types of bioplastics generated, as well as the primary pathways for HC biodegradation and PHAs production. In essence, we propose the potential utilization of HC-degrading bacteria as a versatile tool to tackle two major environmental challenges: HC pollution and the accumulation of plastic waste. Through a comprehensive analysis of strengths and weaknesses in this aspect, this review aims to pave the way for future research in this area, with the goal of facilitating and promoting investigation in a field where obtaining PHAs from HC remains a costly and challenging process.

Chemical digestion method to promote activated sludge cell wall breaking and optimize the polyhydroxyalkanoate (PHA) extraction process

A novel protocol for the recovery of PHA from mixed-cultures proposed. In this experiment, activated sludge for PHA synthesis was investigated and a two-stage chemical digestion method was used for activated sludge to improve the yield of PHA. The highest PHA extraction combination that could be obtained in this experiment was sodium hypochlorite(NaClO) plus sodium dodecyl sulfate (SDS), and the optimal concentration of NaClO solution was 25 % (v/v), and the ratio of the dry weight of activated sludge to SDS was 1:2. The recovery and purity of PHA were 72.14 % and 54.47 %, respectively. The reaction time between NaClO and activated sludge affects the recovery of PHA, and the optimal reaction time of NaClO was experimentally obtained as 30 min. The purity of the PHA extract obtained after purification using methanol was improved.

Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review

The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.

Characterization of polyhydroxyalkanoate production capacity, composition and weight synthesized by Burkholderia cepacia JC-1 from various carbon sources

Polyhydroxyalkanoates (PHA) are microbial polymers that have received widespread attention in recent decades as potential alternatives to some petrochemical-based plastics. However, widespread use of PHA is often impeded by its cost of production. Therefore, the search for and systematic investigation of versatile microbial PHA producers capable of using various carbon sources, even in the form of animal fats, for PHA biosynthesis is desirable. This study highlights the PHA production capacity, monomer composition and molecular weight synthesized by Burkholderia cepacia JC-1, a locally isolated strain from soil, from various carbon sources. In the category of simple sugars and plant oils, the use of glucose and palm oil at C:N ratio of 40 resulted in the highest accumulation of 52 wt% and 36 wt% poly(3-hydroxybutyrate) [P(3HB)] homopolymer and dry cell weight of 2.56 g/L and 3.17 g/L, respectively. Interestingly, B. cepacia JC-1 was able to directly utilize animal-derived lipid in the form of crude and extracted chicken fat, resulting in appreciable dry cell weight and PHA contents of up to 3.19 g/L and 47 wt% respectively, surpassing even that of palm oil in the group of triglycerides as substrates. The presence of antibiotics (streptomycin) in cultivation medium did not significantly affect cell growth and polymer production. The supply of sodium pentanoate as a co-substrate resulted in the incorporation of 3-hydroxyvalerate (3HV) monomer at fractions up to 37 mol%. The molecular weight of polymers produced from glucose, palm oil and chicken fat were in the range of 991–2118 kDa, higher than some reported studies involving native strains. The results from this study form an important basis for possible improvements in using B. cepacia JC-1 and crude chicken fats in solid form for PHA production in the future.

Biopolymer poly-hydroxyalkanoates (PHA) production from apple industrial waste residues: A review

Apple pomace, the residue which is left out after processing of apple serves as a potential carbon source for the production of biopolymer, PHA (poly-hydroxyalkanoates). It is rich in carbohydrates, fibers and polyphenols. Utilization of these waste resources has dual societal benefit-waste management and conversion of waste to an eco-friendly biopolymer. This will lower the overall economics of the process. A major limitation for the commercialization of biopolymer in comparison with petroleum derived polymer is the high cost. This article gives an overview of valorization of apple pomace for the production of biopolymer, various strategies adopted, limitations as well as future perspectives.

Potential biodegradation of Tapis Light Crude Petroleum Oil, using palm oil mill effluent final discharge as biostimulant for isolated halotolerant Bacillus strains

Petroleum hydrocarbon pollution in marine waters has been an extremely significant environmental and health issue worldwide. This study aims at constructing an efficient indigenous bacterial consortium to biodegrade Tapis Light Crude Petroleum Oil (TLCO). The local agro-industrial wastewater of palm oil mill effluent final discharge (POME FD) was used as biostimulant to enhance the biodegradation efficiency. In this study, three TLCO degrading bacteria were isolated from seawater samples collected. Molecular identification using 16S rRNA genes sequencing was done and results show that these isolated strains belong to: Bacillus tropicus, Bacillus licheniformis and Bacillus subtilis. Bacterial consortium tested using four different concentrations of POME FD (0.1, 0.25, 0.5, and 1%) as biostimulant and TLCO (0.5 and 1.0%) degradation capability was investigated. The residual TLCO in culture medium after 40 days was analysed. The results confirmed that POME FD dosage of 0.25% is optimum for the bacterial consortium and can degrade 99.85% of TLCO at 0.5%. However, TLCO degradation with POME FD dosage (0.25%) in TLCO (1.0%) was found optimum, with biodegradation reaching up to 95.23% in 40 days. This study is a beginning for the future development of a consortium of petroleum hydrocarbon degrading bacteria to mitigate oil spills in the Malaysian shoreline.

Bioprocess Engineering Aspects of Sustainable Polyhydroxyalkanoate Production in Cyanobacteria

Polyhydroxyalkanoates (PHAs) are a group of biopolymers produced in various microorganisms as carbon and energy reserve when the main nutrient, necessary for growth, is limited. PHAs are attractive substitutes for conventional petrochemical plastics, as they possess similar material properties, along with biocompatibility and complete biodegradability. The use of PHAs is restricted, mainly due to the high production costs associated with the carbon source used for bacterial fermentation. Cyanobacteria can accumulate PHAs under photoautotrophic growth conditions using CO₂ and sunlight. However, the productivity of photoautotrophic PHA production from cyanobacteria is much lower than in the case of heterotrophic bacteria. Great effort has been focused to reduce the cost of PHA production, mainly by the development of optimized strains and more efficient cultivation and recovery processes. Minimization of the PHA production cost can only be achieved by considering the design and a complete analysis of the whole process. With the aim on commercializing PHA, this review will discuss the advances and the challenges associated with the upstream processing of cyanobacterial PHA production, in order to help the design of the most efficient method on the industrial scale.

Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714

Poly-β-hydroxybutyrate (PHB) production from CO₂ has the potential to reduce the production cost of this biodegradable polyesters, and also to make the material more sustainable compared to utilization of sugar feedstocks. In this study the unicellular cyanobacterium, Synechocystis sp. PCC 6714 has been identified as an unexplored potential organism for production of PHB. Synechocystis sp. PCC 6714 was studied under various cultivation conditions and nutritional limitations. Combined effects of nitrogen and phosphorus deficiency led to highest PHB accumulation under photoautotrophic conditions. Multivariate experimental design and quantitative bioprocess development methodologies were used to identify the key cultivation parameters for PHB accumulation. Biomass growth and PHB accumulation were studied under controlled defined conditions in a lab-scale photobioreactor. Specific growth rates were fourfold higher in photobioreactor experiments when cultivation conditions were controlled. After 14 days of cultivation in nitrogen and phosphorus, limited media intracellular PHB levels reached up to 16.4% from CO₂. The highest volumetric production rate of PHB was 59 ± 6 mg L⁻¹ day⁻¹. Scanning electron microscopy of isolated PHB granules of Synechocystis sp. PCC 6714 cultivated under nitrogen and phosphorus limitations showed an average diameter of 0.7 µm. The results of this study might contribute towards a better understanding of photoautotrophic PHB production from cyanobacteria.

Valorization of waste glycerol for the production of poly (3-hydroxybutyrate) and poly (3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer by Cupriavidus necator and extraction in a sustainable manner

Glycerol is a by-product of many industrial processes and huge amounts of it are generated in the form of waste, thereby necessitating a search for the method of its disposal. An interesting solution is the valorization of crude glycerol into value added product such as polyhydroxyalkanoates (PHAs). The feasibility of producing PHAs by Cupriavidus necator was evaluated using crude glycerol (WG). Various cultivation strategies were designed for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer by adding different organic acids as precursors at different concentrations levels. Batch cultivation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production showed accumulation of 6.76g/L biomass containing 4.84g/L copolymer on WG with a maximum 3-hydroxyvalerate content of 24.6mol%. PHAs extraction using a non-toxic and recyclable solvent, 1,2 propylene carbonate, showed the highest recovery yield (90%) and purity (93%) at 120°C temperature and 30min incubation. This is the first report on jatropha based glycerol valorization for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production coupled with extraction using non-toxic solvent.

Quantitative image analysis of polyhydroxyalkanoates inclusions from microbial mixed cultures under different SBR operation strategies

Polyhydroxyalkanoates (PHAs) produced from mixed microbial cultures (MMC), regarded as potential substitutes of petrochemical plastics, can be found as intracellular granules in various microorganisms under limited nutrient conditions and excess of carbon source. PHA is traditionally quantified by laborious and time-consuming chromatography analysis, and a simpler and faster method to assess PHA contents from MMC, such as quantitative image analysis (QIA), is of great interest. The main purpose of the present work was to upgrade a previously developed QIA methodology (as reported by Mesquita et al. (Anal Chim Acta 770:36-44, 2013a, Anal Chim Acta 865:8-15, 2015)) for MMC intracellular PHA contents quantification, increase the studied intracellular PHA concentration range, and extend to different sequencing batch reactor (SBR) operation strategies. Therefore, the operation of a new aerobic dynamic feeding (ADF) SBR allowed further extending the studied operating conditions, dataset, and range of the MMC intracellular PHA contents from the previously reported anaerobic/aerobic cycle SBR. Nile Blue A (NBA) staining was employed for epifluorescence microscope visualization and image acquisition, further fed to a custom developed QIA. Data from each of the feast and famine cycles of both SBR were individually processed using chemometrics analysis, obtaining the correspondent partial least squares (PLS) models. The PHA concentrations determined from PLS models were further plotted against the results obtained in the standard chromatographic method. For both SBR, the predicted ability was higher at the end of the feast stage than for the famine stage. Indeed, an independent feast and famine QIA data treatment was found to be fundamental to obtain the best prediction abilities. Furthermore, a promising overall correlation (R ² of 0.83) could be found combining the overall QIA data regarding the PHA prediction up to a concentration of 1785.1 mg L^-1 (37.3 wt%). Thus, the results confirm that the presented QIA methodology can be seen as promising for estimating higher intracellular PHA concentrations for a larger reactors operation systems and further extending the prediction range of previous studies.

Polyhydroxybutyrate and polyhydroxydodecanoate produced by Burkholderia contaminans IPT553

AIMS

In this paper, we introduce a new Burkholderia contaminans capable of producing a newly characterized polymer.

METHODS AND RESULTS

CG-MS and magnetic nuclear resonance ¹ H and ¹³ C were used to determine the constitution of polymers produced in glucose, glucose with casein, sucrose and sucrose with casein. Three pairs of primers were used to find the polyhydroxyalkanoates (PHA) synthase class and sequence. The synthesized polymers were composed by short-chain length PHA (scl-PHA), especially polyhydroxybutyrate (PHB), and medium chain length PHA (mcl-PHA), especially polyhydroxydodecanoate (PHDd), and their concentration, constitution and molecular weight depend on carbon source used. The bacterium showed only class I synthase which could not explain the mcl-PHA production.

CONCLUSIONS

Burkholderia contaminans has a class I PHA synthase and produces PHB combined to PHDd when cultivated in sucrose or glucose, and PHDd concentration is affected when casein is used.

SIGNIFICANCE AND IMPACT OF THE STUDY

PHA are natural polymers produced by a wide range of bacteria. The presence of PHDd monomers confers to the polymer elastomeric properties. Previously, PHDd was only obtained when bacteria were cultivated in related carbon source. In this work, B. contaminansIPT553 produced PHB with PHDd using simple and low-cost carbon sources that can make possible the cheaper production of a more flexible biopolymer with crystallinity and elasticity different from the more common PHAs.

Carbon-rich wastes as feedstocks for biodegradable polymer (polyhydroxyalkanoate) production using bacteria

Research into the production of biodegradable polymers has been driven by vision for the most part from changes in policy, in Europe and America. These policies have their origins in the Brundtland Report of 1987, which provides a platform for a more sustainable society. Biodegradable polymers are part of the emerging portfolio of renewable raw materials seeking to deliver environmental, social, and economic benefits. Polyhydroxyalkanoates (PHAs) are naturally-occurring biodegradable-polyesters accumulated by bacteria usually in response to inorganic nutrient limitation in the presence of excess carbon. Most of the early research into PHA accumulation and technology development for industrial-scale production was undertaken using virgin starting materials. For example, polyhydroxybutyrate and copolymers such as polyhydroxybutyrate-co-valerate are produced today at industrial scale from corn-derived glucose. However, in recent years, research has been undertaken to convert domestic and industrial wastes to PHA. These wastes in today's context are residuals seen by a growing body of stakeholders as platform resources for a biobased society. In the present review, we consider residuals from food, plastic, forest and lignocellulosic, and biodiesel manufacturing (glycerol). Thus, this review seeks to gain perspective of opportunities from literature reporting the production of PHA from carbon-rich residuals as feedstocks. A discussion on approaches and context for PHA production with reference to pure- and mixed-culture technologies is provided. Literature reports advocate results of the promise of waste conversion to PHA. However, the vast majority of studies on waste to PHA is at laboratory scale. The questions of surmounting the technical and political hurdles to industrialization are generally left unanswered. There are a limited number of studies that have progressed into fermentors and a dearth of pilot-scale demonstration. A number of fermentation studies show that biomass and PHA productivity can be increased, and sometimes dramatically, in a fermentor. The relevant application-specific properties of the polymers from the wastes studied and the effect of altered-waste composition on polymer properties are generally not well reported and would greatly benefit the progress of the research as high productivity is of limited value without the context of requisite case-specific polymer properties. The proposed use of a waste residual is advantageous from a life cycle viewpoint as it removes the direct or indirect effect of PHA production on land usage and food production. However, the question, of how economic drivers will promote or hinder advancements to demonstration scale, when wastes generally become understood as resources for a biobased society, hangs today in the balance due to a lack of shared vision and the legacy of mistakes made with first generation bioproducts.

Cost-effective defined medium for the production of polyhydroxyalkanoates using agricultural raw materials

According to the cost of carbon substrate for producing biopolymer of polyhydroxyalkanoates (PHAs) still has a barrier to extend in an industrial scale. The aim of this work was to evaluate the defined PHAs media containing the agricultural raw materials of pineapple and sugarcane to produce PHAs by Bacillus strain. Batch fermentation was carried out in flask scale to compare the efficiency of defined media using statistical methodology. The defined medium 8 of pineapple was achieved the highest PHAs concentration and productivity (1.86 g/L and 0.077 g/Lh). The effect of pH and aeration was extensively studied in a fermentor. The results were revealed that PHAs production would be increased from the condition of uncontrolled pH and at higher aeration rate. The extracted PHAs clearly showed in a homopolymer structure of poly(3-hydroxybutyrate) (PHB) with melting temperature (Tm) of 172°C 54.39% crystallinity.

Polyhydroxyalkanoate granules quantification in mixed microbial cultures using image analysis: Sudan Black B versus Nile Blue A staining

Polyhydroxyalkanoates (PHA) can be produced and intracellularly accumulated as inclusions by mixed microbial cultures (MMC) for bioplastic production and in enhanced biological phosphorus removal (EBPR) systems. Classical methods for PHA quantification use a digestion step prior to chromatography analysis, rendering them labor intensive and time-consuming. The present work investigates the use of two quantitative image analysis (QIA) procedures specifically developed for PHA inclusions identification and quantification. MMC obtained from an EBPR system were visualized by bright-field and fluorescence microscopy for PHA inclusions detection, upon Sudan Black B (SBB) and Nile Blue A (NBA) staining, respectively. The captured color images were processed by QIA techniques and the image analysis data were further treated using multivariate statistical analysis. Partial least squares (PLS) regression coefficients of 0.90 and 0.86 were obtained between QIA parameters and PHA concentrations using SBB and NBA, respectively. It was found that both staining procedures might be seen as alternative methodologies to classical PHA determination.

Application of random mutagenesis to enhance the production of polyhydroxyalkanoates by Cupriavidus necator H16 on waste frying oil

Using random chemical mutagenesis we obtained the mutant of Cupriavidus necator H16 which was capable of improved (about 35 %) production of poly(3-hydroxybuytrate) (PHB) compared to the wild-type strain. The mutant exhibited significantly enhanced specific activities of enzymes involved in oxidative stress response such as malic enzyme, NADP-dependent isocitrate dehydrogenase, glucose-6-phosphate dehydrogenase and glutamate dehydrogenase. Probably, due to the activation of these enzymes, we also observed an increase of NADPH/NADP⁺ ratio. It is likely that as a side effect of the increase of NADPH/NADP⁺ ratio the activity of PHB biosynthetic pathway was enhanced, which supported the accumulation of PHB. Furthermore, the mutant was also able to incorporate propionate into copolymer poly(3-hydroxybuytyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] more efficiently than the wild-type strain (Y3HV/prec = 0.17 and 0.29 for the wild-type strain and the mutant, respectively)). We assume that it may be caused by lower availability of oxaloacetate for the utilization of propionyl-CoA in 2-methylcitrate cycle due to increased action of malic enzyme. Therefore, propionyl-CoA was incorporated into copolymer rather than transformed to pyruvate via 2-methylcitrate cycle. Thus, the mutant was capable of the utilization of waste frying oils and the production of P(3HB-co-3HV) with better yields and improved content of 3HV resulting in better mechanical properties of copolymer than the wild-type strain. The results of this work may be used for the development of innovative fermentation strategies for the production of PHA and also it might help to define novel targets for the genetic manipulations of PHA producing bacteria.

New PHA products using unrelated carbon sources

Polyhydroxyalkanoates (PHA) are natural polyesters stored by a wide range of bacteria as carbon source reserve. Due to its chemical characteristics and biodegradability PHA can be used in chemical, medical and pharmaceutical industry for many human purposes. Over the past years, few Burkholderia species have become known for production of PHA. Aside from that, these bacteria seem to be interesting for discovering new PHA compositions which is important to different industrial applications. In this paper, we introduce two new strains which belong either to Burkholderia cepacia complex (Bcc) or genomovar-type, Burkholderia cepacia SA3J and Burkholderia contaminans I29B, both PHA producers from unrelated carbon sources. The classification was based on 16S rDNA and recA partial sequence genes and cell wall fatty acids composition. These two strains were capable to produce different types of PHA monomers or precursors. Unrelated carbon sources were used for growth and PHA accumulation. The amount of carbon source evaluated, or mixtures of them, was increased with every new experiment until it reaches eighteen carbon sources. As first bioprospection experiments staining methods were used with colony fluorescent dye Nile Red and the cell fluorescent dye Nile Blue A. Gas chromatography analysis coupled to mass spectrometry was used to evaluate the PHA composition on each strain cultivated on different carbon sources. The synthesized polymers were composed by short chain length-PHA (scl-PHA), especially polyhydroxybutyrate, and medium chain length-PHA (mcl-PHA) depending on the carbon source used.

Expression of Aeromonas caviae polyhydroxyalkanoate synthase gene in Burkholderia sp. USM (JCM15050) enables the biosynthesis of SCL-MCL PHA from palm oil products

AIMS

Burkholderia sp. USM (JCM15050) isolated from oil-polluted wastewater is capable of utilizing palm oil products and glycerol to synthesize poly(3-hydroxybutyrate) [P(3HB)]. To confer the ability to produce polymer containing 3-hydroxyhexanoate (3HHx), plasmid (pBBREE32d13) harbouring the polyhydroxyalkanoate (PHA) synthase gene of Aeromonas caviae (phaC(Ac)) was transformed into this strain.

METHODS AND RESULTS

  The resulting transformant incorporated approximately 1 ± 0·3 mol% of 3HHx in the polymer when crude palm kernel oil (CPKO) or palm kernel acid oil was used as the sole carbon source. In addition, when the transformed strain was cultivated in the mixtures of CPKO and sodium valerate, PHA containing 69 mol% 3HB, 30 mol% 3-hydroxyvalerate and 1 mol% 3HHx monomers was produced. Batch feeding of carbon sources with 0·5% (v/v) CPKO at 0 h and 0·25% (w/v) sodium valerate at 36 h yielded 6 mol% of 3HHx monomer by controlled-feeding strategies.

CONCLUSIONS

Burkholderia sp. USM (JCM15050) has the metabolic pathways to supply both the short-chain length (SCL) and medium-chain length (MCL) PHA monomers. By transforming the strain with the Aer. caviae PHA synthase with broader substrate specificity, SCL-MCL PHA was produced.

SIGNIFICANCE AND IMPACT OF THE STUDY

  This is the first study demonstrating the ability of transformant Burkholderia to produce P(3HB-co-3HHx) from a single carbon source.

Enhancing the 3-hydroxyvalerate component in bioplastic PHBV production by Cupriavidus necator

In the current context of global warming, the substitution of conventional plastics with bioplastics is a challenge. To take up this challenge, we must meet different technical and economic constraints. In the case of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), the technical properties can be modulated by varying the 3-hydroxyvalerate content. 3-Hydroxyvalerate (3-HV) enhancement is an issue; therefore, simultaneous evaluation of several 3-hydroxyvalerate-enhancing substrates through fractional factorial design of experiments is described. Eight substrates citric, valeric, propionic, and levulinic acids; propanol; pentanol; and sodium propionate were studied for 3-HV enhancement, and sodium glutamate was studied for biomass and polyhydroxyalkanoate (PHA) enhancement. The most efficient 3-hydroxyvalerate-enhancing factors were levulinic acid, sodium propionate, and pentanol; however, pentanol, at a concentration of 1 g/L, had an extremely negative influence on biomass production and the PHA content of cells. The effect of the inoculum nutrient composition on the final 3-HVcontent was also evaluated. These results showed that the most efficient combination for the production of high 3-HVcontent in PHBV was primary inoculum growth on mineral medium followed by fermentation for 48 h with levulinic acid and sodium propionate (at 1 g/L) as the only carbon sources. This allowed us to produce PHBV with a 3-HVcontent of 80 mol % and overall volumetric and specific productivities of 2 mg/L/h and 3.9 mg/g(CDW) /h, respectively, with the addition of only 2 g/L of inducing substances.

Production of polyhydroxyalkanoates from waste frying oil by Cupriavidus necator

Polyhydroxyalkanoates (PHAs) are biopolymers, which can replace petrochemical plastics in many applications. However, these bioplastics are currently far more expensive than petrochemical plastics. Many researchers are investigating the use of inexpensive substrates derived from waste streams. Waste frying oil is abundant and can be used in PHA production without filtration.

Cupriavidus necator (formerly known as Ralstonia eutropha) is a versatile organism for the production of PHAs. Small-scale batch fermentation studies have been set up, using different concentrations of pure vegetable oil, heated vegetable oil and waste frying oil. These oils are all rapeseed oils.

It has been shown that Cupriavidus necator produced the homopolymer polyhydroxybutyrate (PHB) from the rapeseed oils. The achieved PHB concentration from waste frying oil was 1.2 g/l, which is similar to a concentration that can be obtained from glucose. The PHB harvest from pure oil and heated oil was 0.62 g/l and 0.9 g/l respectively. A feed of waste frying oil could thus achieve more biopolymer than pure vegetable oil. While the use of a waste product is beneficial from a life-cycle perspective, PHB is not the only product that can be made from waste oil. The collection of waste frying oil is becoming more widespread, making waste oil a good alternative to purified oil or glucose for PHB production.

Potential of Bacillus sp. to produce polyhydroxybutyrate from biowaste

AIM

To test the Bacillus strains for their abilities to produce polyhydroxybutyrate (PHB) from different sugars and biowaste (Pea-shells).

METHODS AND RESULTS

Six Bacillus strains were checked for their ability to produce PHB from GM2 medium supplemented with different sugars at the rate of 1% (w/v) and from biowaste and GM2 (BW : M) combinations (3 : 7, 1 : 1, 7 : 3). Glucose supplemented GM2 medium resulted in maximum PHB production of 435 mg l(-1) constituting 31-62% w/w of the total cell dry mass. Substituting GM2 medium to the extent of 50% with biowaste (pea-shell slurry) resulted in 945-1205 mg l(-1) PHB (55-65% w/w). Optimization for additional nitrogen supplementation, inoculum size resulted in a final PHB production of 3010-3370 mg l(-1) equivalent to 300 g kg(-1) biowaste (dry wt).

CONCLUSION

The Bacillus strains were able to produce PHB from biowaste (Pea-shells) as cheap source of substrate.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report on usage of pea-shells as feed for PHB production, opening new possibilities for its use for production of PHB and Bacillus as potential candidate for the purpose.

Bacterial synthesis of biodegradable polyhydroxyalkanoates

Various bacterial species accumulate intracellular polyhydroxyalkanoates (PHAs) granules as energy and carbon reserves inside their cells. PHAs are biodegradable, environmentally friendly and biocompatible thermoplastics. Varying in toughness and flexibility, depending on their formulation, they can be used in various ways similar to many nonbiodegradable petrochemical plastics currently in use. They can be used either in pure form or as additives to oil-derived plastics such as polyethylene. However, these bioplastics are currently far more expensive than petrochemically based plastics and are therefore used mostly in applications that conventional plastics cannot perform, such as medical applications. PHAs are immunologically inert and are only slowly degraded in human tissue, which means they can be used as devices inside the body. Recent research has focused on the use of alternative substrates, novel extraction methods, genetically enhanced species and mixed cultures with a view to make PHAs more commercially attractive.

Optimization of cultural and nutritional conditions for accumulation of poly-beta-hydroxybutyrate in Synechocystis sp. PCC 6803

Poly-beta-hydroxybutyrate (PHB) accumulation in the unicellular cyanobacterium, Synechocystis sp. PCC 6803, was studied under various cultural and nutritional conditions. Under controlled condition, cells harvested at the stationary phase of growth depicted maximum accumulation of PHB, i.e., 4.5% (w/w of dry cells) as compared to lag (1.8%) or logarithmic (2.9%) phases of cultures. A temperature range of 28-32 degrees C and pH between 7.5 and 8.5 were preferred for PHB accumulation. Cells cultivated under regular light-dark cycles accumulated more PHB (4.5%) than those grown under continuous illumination (2.4%). Nitrogen and phosphorus starvation stimulated PHB accumulation up to the tune of 9.5 and 11% (w/w of dry cells), respectively. Synechocystis cells pre-grown in glucose (0.1%)-supplemented BG-11 medium when subjected to P-deficiency in presence of acetate (0.4%), PHB accumulation was boosted up to 29% (w/w of dry cells), the value almost 6-fold higher with respect to photoautotrophic condition. Fishpond discharges were found as suitable media for PHB accumulation in the test cyanobacterium.

Conversion of agricultural feedstock and coproducts into poly(hydroxyalkanoates)

Aside from their importance to the survival and general welfare of mankind, agriculture and its related industries produce large quantities of feedstocks and coproducts that can be used as inexpensive substrates for fermentative processes. Successful adoption of these materials into commercial processes could further the realization of a biorefinery industry based on agriculturally derived feedstocks. One potential concept is the production of poly(hydroxyalkanoate) (PHA) polymers, a family of microbial biopolyesters with a myriad of possible monomeric compositions and performance properties. The economics for the fermentative production of PHA could benefit from the use of low-cost agricultural feedstocks and coproducts. This mini-review provides a brief survey of research performed in this area, with specific emphasis on studies describing the utilization of intact triacylglycerols (vegetable oils and animal fats), dairy whey, molasses, and meat-and-bone meal as substrates in the microbial synthesis of PHA polymers.