Potential of combined fungal and bacterial treatment for color removal in textile wastewater

Industrial bioelectrochemistry for waste valorization: State of the art and challenges

Bioelectrochemistry has gained importance in recent years for some of its applications on waste valorization, such as wastewater treatment and carbon dioxide conversion, among others. The aim of this review is to provide an updated overview of the applications of bioelectrochemical systems (BESs) for waste valorization in the industry, identifying current limitations and future perspectives of this technology. BESs are classified according to biorefinery concepts into three different categories: (i) waste to power, (ii) waste to fuel and (iii) waste to chemicals. The main issues related to the scalability of bioelectrochemical systems are discussed, such as electrode construction, the addition of redox mediators and the design parameters of the cells. Among the existing BESs, microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) stand out as the more advanced technologies in terms of implementation and R&D investment. However, there has been little transfer of such achievements to enzymatic electrochemical systems. It is necessary that enzymatic systems learn from the knowledge reached with MFC and MEC to accelerate their development to achieve competitiveness in the short term.

Microbial bioremediation strategies with wastewater treatment potentialities - A review

The demand for innovative waste treatment techniques has arisen because of the establishment and operation of rigorous waste discharge guidelines into the environment. Due to the rapid increase in the human population, wastewater treatment is a procedure of increasing significance. As a result, wastewater treatment systems are intended to sustain high activities and densities of such microorganisms which meet the different purification requirements. The waste produced by the pharmaceutical industry, if not adequately treated, has harmful repercussions for the environment as well as public health. Bioremediation is an innovative and optimistic technology that can be used to remove and reduce heavy metals from polluted water and contaminated soil. Because of cost-effectiveness and environmental compatibility, bioremediation using microorganisms has an excellent potential for future development. A diverse range of microorganisms, including algae, fungi, yeasts, and bacteria, can function as biologically active methylators, capable of modifying toxic species. Microorganisms play a crucial role in heavy metal bioremediation. Nanotechnology may minimize industry expenses by producing environmentally friendly nanomaterials to alleviate these contaminants. The use of microorganisms in nanoparticle synthesis gives green biotechnology a positive impetus to cost reduction and sustainable production as a developing nanotechnology sector.

Detection of trizole contaminated waste water using biocatalyst and effective biodegradation potential of flubendiamide

Flubendiamide is a new class of chemical pesticide with broad spectrum activity against lepidopteran pests. Due to limited approach and high specificity towards various non targeted organisms, the unrestricted application of this pesticide as a prominent alternate for organochlorine and organophosphate pesticides, causing serious environmental pollution. In this study, wastewater was used for the determination of microbial strains and pesticide degrading fungi. Microbial population and flubendiamide resistant fungal strains were characterized using enriched medium. Aerobic bacteria (6.38 ± 0.23 log CFU/mL), nitrifying bacteria (2.73 ± 0.31 CFU/mL), Lactobaillus (0.72 ± 0.03 log CFU/mL), actinomycetes (5.36 ± 0.27 log CFU/mL) and fungi (4.79 ± 0.22 log CFU/mL) were detected. The prominent fungi genera were, Fusarium, Trichoderma, Cladophialophora, Paecilomyces, Talaromyces, Penicillium, Aspergillus, Candida, Phyllosticta, Mycosphaerella, Ochroconis, and Mucor. Minimum inhibitory concentration of the rapidly growing organism (FR04) revealed its ability to tolerate up to 1250 mg/L flubendiamide concentration. Morphological, biochemical and molecular analysis revealed that the strain was Aspergillus terreus FR04. The residual pesticide was detected using a High Performance Liquid Chromatography (HPLC). High performance liquid chromatography analysis revealed that 89 ± 1.9% pesticide removal efficiency was observed in strain FR04 at optimized culture conditions (96 h, pH 6.5, 30 °C and 300 mg/L pesticide concentration). The strain FR04 degraded pollutants from the wastewater and improved water quality. A. terreu sFR04 is an indigenous fungus and has the ability to degrade trizole pesticides from the wastewater significantly.

Treatment of NSAPs-rich petrochemical wastewaters using a two-stage combined process of fungi and activated sludge

A two-stage biological process using fungi and bacteria was set-up and tested for treating a petrochemical wastewater containing naphthalene sulphonic acid polymers. The fungal treatment was carried out through a trickling filter inoculated with Pleurotus ostreatus attached on Luffa cylindrica acting as both physical support and carbon source. The fungal reactor was operated in non-sterile conditions setting two pH values (5 and 6) and two hydraulic retention times (2 d and 3 d). The effluent was then sent to an activated sludge reactor operating the second stage of the treatment. Using an HPLC-based technique, it was observed that the fungal reactor was capable of reducing the polymerization grade of naphthalene sulphonic acid polymers up to 35%, thus increasing significantly the biodegradability of the petrochemical wastewater, from the initial 9% to 46%. The two-stage process allowed to remove about 50% of the total COD much higher than 9% that can be achieved with activated sludge alone. The use of Luffa cylindrica as support for fungi allowed to limit bacterial contamination of the trickling filter and enhanced enzymatic production (on average 20 U/L of Laccase) without any release of non-biodegradable by-products in the effluent. Extraction and PCR-amplification of fungal DNA was carried out along with over 70 d running process in order to monitor the changes of the fungal community inside the reactors. Results showed that Meyerozyma, Fusarium and Thricoderma, spp. developed inside the reactor with Thricoderma, spp. representing the main constituent of fungal biomass at the end of the experiment.

Evaluation of tire derived rubber (TDR) fixed biofilm reactor (FBR) for remediation of Methylene blue dye from wastewater

The present investigation is focused on development of aerobic biofilm on tire-derived rubber (TDR) media and then evaluation of such system for bioremediation of Methylene blue (MB) dye for 9 weeks. After 9 weeks of operation, the COD, BOD, ammonia and color values have been declined by 89.2%, 98.3%, 99.61% and 99.81%, respectively, While SEM-EDX results showed a variance in weight percent of various elements in TDR without biofilm i.e. raw TDR media, as well as in the 1st and 9th-week samples. Moreover, fine and strong peaks were observed in both the MB simulated wastewater and 9th week TDR samples at 1190, 1300, 1400, 1450, 1500 and 1618 cm^-1 respectively by Raman Spectroscopic analysis. Further, FTIR analysis was performed for the MB simulated wastewater, and absorbance peaks ranging from 1591 to 1363 cm^-1 and 3410 cm^-1 were observed in all the samples with different intensities. To assess the biodeterioration of the TDR media, ATR was performed for the raw, 1st, 2nd and 9th week TDR media samples and in the raw TDR, two important bands, 842 and 2962 cm^-1 were noticed representing -CH = CH and -CH₃. A clear variation of bands and peak intensities were observed in different support media samples. The results indicate that TDR media is a resilient, chemically resistant material and could be employed for the biofilm growth for biological treatment of textile dye wastewater.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Application of (super)cavitation for the recycling of process waters in paper producing industry

In paper production industry, microbial contaminations of process waters are common and can cause damage to paper products and equipment as well as the occurrence of pathogens in the end products. Chlorine omission has led to the usage of costly reagents and products of lower mechanical quality. In this study, we have tested a rotation generator equipped with two sets of rotor and stator assemblies to generate developed cavitation (unsteady cloud shedding with pressure pulsations) or supercavitation (a steady cavity in chocked cavitation conditions) for the destruction of a persistent bacteria Bacillus subtilis. Our results showed that only supercavitation was effective and was further employed for the treatment of waters isolated from an enclosed water recycle system in a paper producing plant. The water quality was monitored and assessed according to the chemical (COD, redox potential and dissolved oxygen), physical (settleable solids, insolubles and colour intensity) and biological methods (yeasts, aerobic and anaerobic bacteria, bacterial spores and moulds). After one hour of treatment, a strong 4 logs reduction was achieved for the anaerobic sulphate reducing bacteria and for the yeasts; a 3 logs reduction for the aerobic bacteria; and a 1.3 logs reduction for the heat resistant bacterial spores. A 22% reduction in COD and an increase in the redox potential (37%) were observed. Sediments were reduced by 50% and the insoluble particles by 67%. For bacterial destruction in real industrial process waters, the rotation generator of supercavitation spent 4 times less electrical energy in comparison to the previously published cavitation treatments inside the Venturi constriction design.

Determination of the effect of RBBR on laccase activity and gene expression level of fungi in lichen structure

This study provides information about the differential transcription regulation of laccase genes in response to RBBR dye. To this purpose, we determined the laccase gene expression, laccase activity, and protein profile of lichen-forming fungi supported to RBBR dye. For those obtained from optimal laccase genes expression profiles, we modified different RNA extraction protocols to obtain high quality and quantity RNA to be used in downstream applications in lichen-forming fungus. We also determined the expression of ten laccase genes in response to RBBR dye by qRT-PCR and validated protein profile. As a result of our study, a high laccase activity of 522 U mL^-1 was obtained after submerged fermentation for 17 days. The maximal laccase activity to RBBR dye was obtained at 408 h. The expression profiles of laccase gene expression on ten laccase genes showed up- or down-regulation in course of eight fermentation times. The most up-regulated gene during the process was lac8. However, poxa1b gene expression was lowest in lichen-forming fungi biomass supplemented with RBBR dye. This study has revealed the influence of RBBR dye on laccase activity levels and the determination of gene expression levels in lichen-forming fungi.

Photocatalytic activity of CuO/Cu(OH)2 nanostructures in the degradation of Reactive Green 19A and textile effluent, phytotoxicity studies and their biogenic properties (antibacterial and anticancer)

In this study, CuO/Cu(OH)₂ (denoted as CuONs) nanostructures were synthesized relying to a cheap and rapid chemical co-precipitation method using copper sulfate and liquid ammonia as precursors. Results obtained from X-ray diffraction, and field emission scanning electron microscopy analysis revealed the crystalline nature of synthesized CuONs. Fourier transform infrared spectroscopy and energy dispersive spectroscopy studies showed interactions between copper and oxygen atoms. Synthesized CuONs showed the size in the range of 20-30 nm using high resolution transmission electron microscopy analysis. The photocatalytic degradation performance of Reactive Green 19A (RG19A) dye using CuONs was evaluated. The results showed that CuONs exhibited 98% degradation efficiency after 12 h and also complete mineralization in form of reducing chemical oxygen demand (COD) (84%) and total organic carbon (TOC) (80%). The nanocatalyst was recovered from the dye containing solution and its catalytic activity can be reused up to four times efficiently. CuONs was also able to decolorize actual textile effluent (80% in terms of the American Dye Manufacturers' Institute (ADMI) value) with significant reductions in COD (72%) and TOC (69%). Phytotoxicity studies revealed that the degradation products of RG19A and textile effluent were scarcely toxic in nature, thereby increasing the applicability of CuONs for the treatment of textile wastewater. Additionally, the CuONs showed a maximum antibacterial effect against human pathogens which also displayed synergistic antibacterial potential related to commercial antibiotics. Moreover, CuONs displayed strong antioxidant activity in terms of ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (IC₅₀: 51 μg/mL) and DPPH (1,1-diphenyl-2-picrylhydrazyl) (IC₅₀: 60 μg/mL) radical scavenging. The CuONs exhibited dose dependent response against tumor rat C6 cell line (IC₅₀: 60 μg/mL) and may serve as anticancer agents.

A review on the sustainability of textile industries wastewater with and without treatment methodologies

The textile industry in India plays a vital role in the economic growth of the nation. The growth of the textile industry not only impacts the economy of a country but also influences the global economy and mutual exchange of technology between the countries. However, the textile industry also generates an enormous quantity of waste as waste sludge, fibers and chemically polluted waters. The chemically polluted textile wastewater degrades the quality of the soil and water when it mixes with these natural resources and its dependent habitats and environment. Owing to the existing problem of solid and liquid waste, textile industries are facing major problems in environment pollution. Therefore, researchers and the textile industries are focusing on the reduction of textile wastewater and the formulation of alternative efficient treatment techniques without hampering the environment. Hence, the present literature survey mainly concentrates on the various wastewater treatment techniques and their advantages. Moreover, the focus of the study was to describe the methods for the reduction of environmental waste and effective utilization of recycled water with zero wastewater management techniques. The alternative methods for the reduction of textile waste are also covered in this investigation. Finally, this paper also suggests utilization of solid wastes after treatment of wastewater in other sectors like construction for the preparation of low-grade tiles and or bricks by replacing the cement normally used in their manufacturing.

Potential biotechnological capabilities of cultivable mycobiota from carwash effluents

Urban life has created man‐made extreme environments like carwashes. These environments have, however, not been sufficiently explored for mycobiota that can be sources of biotechnologically useful products, as has been the case with natural extreme environments. Using a combination of culture and molecular techniques, fungi from carwash effluents was characterized for production of lipase and cellulase enzymes, nonpolar and polar biotechnologically relevant secondary metabolites and hydrocarbon utilization. The isolated fungal strains belonged to the genera Alternaria, Cladosporium, Penicillium, Peyronellaea, Rhizopus, Spegazzinia, Trichoderma, Ulocladium and Yarrowia. Sixty‐six percent (66%) of the fungal isolates were found to be able to metabolize naphthalene and benzanthracene, showing potential for application in bioremediation of hydrocarbon polluted sites. Lipase production by the isolates Penicillium sp. BPS3 (2.61 U/ml), Trichoderma sp. BPS9 (2.01 U/ml), Rhizopus sp. CAL1 (2.05 U/ml), Penicillium sp. PCW1 (2.99 U/ml) and Penicillium sp. SAS1 (2.16 U/ml) compared well with previously recorded lipase production levels by other fungi. The highest producers of cellulase were Penicillium sp. SAS1 (12.10 U/ml), Peyronella sp. CAW5 (4.49 U/ml) and Cladosporium sp. SAS3 (4.07 U/ml), although these activities were lower than previously reported levels. GC‐MS analysis of the fungal secondary metabolites resulted in identification of 572 compounds, including azulene, methanamine, N‐pentylidene, metoclopramide, and mepivacaine while compounds determined by UHPLC‐MS included 10‐undecen‐1‐ol, piquerol A, 10‐undecyn‐1‐ol, cyclo(leucylprolyl) and rac‐etomidate. These compounds were previously determined to have various activities including anticancer, antibacterial, antifungal, antihypertensive, antidiabetic and anti‐inflammatory properties. The study demonstrated that fungi from carwash effluents are natural sources of some biotechnologically important products.

Performance of a newly isolated salt-tolerant yeast strain Pichia occidentalis G1 for degrading and detoxifying azo dyes

A salt-tolerant yeast named G1 which could decolorize various azo dyes was recently isolated and identified as Pichia occidentalis. Systematic researches on characterization, degradation pathway, detoxification effects and enzymes analysis of this yeast were done. The results showed that the optimal metabolism and growth parameters for strain G1 were: 2.0gL^-1 glucose, 0.6gL^-1 ammonium sulfate, 0.08gL^-1 yeast extract, 30gL^-1 NaCl, 160rmin^-1, 30°C and pH 5.0. More than 98% of 50mgL^-1 Acid Red B (ARB) could be decolorized within 16h under the optimal conditions. Additionally, strain G1 degraded and obviously detoxified ARB through a possible pathway successively consisting of decolorization, deamination/desulfonation and TCA cycle processes. Moreover, NADH-DCIP reductase was estimated as the key reductase for decolorization and ligninases including lignin peroxidase, manganese peroxidase and laccase were important oxidoreductases for further degradation of decolorization intermediates.

Biodegradation of 2-naphthalensulfonic acid polymers by white-rot fungi: Scale-up into non-sterile packed bed bioreactors

This paper presents a first scale up under non-sterile conditions of the biodegradation process of 2-naphthalensulfonic acid polymers (NSAP) contained in a petrochemical wastewater by two white-rot fungi (Bjerkandera adusta and Pleurotus ostreatus). The biodegradation experiment was conducted first in flasks and then in packed-bed bioreactors filled with inert and biodegradable carriers (straw), the latter acting as both physical support and carbon source. Reactor inoculated with P. ostreatus attached on straw worked under non-sterile conditions for three months showing 30 ± 5% NSAP degradation. Respirometric tests showed that the fungal treatment was also able to significantly increase the biodegradable fraction of the wastewater COD, which rose from 9% to 40%. It was observed that the fungal degradation of the straw in the bed releases non-biodegradable by-products. Taking into account this contribution to nbCOD, the combined treatment of fungi and activated sludge could theoretically be able to reduce the original COD by up to 73%.

Treatment of textile wastewater by submerged membrane bioreactor: In vitro bioassays for the assessment of stress response elicited by raw and reclaimed wastewater

The performance of a pilot-scale membrane bioreactor (MBR) system for the treatment of textile wastewater was investigated. The MBR was continuously operated for 7 months. Very high treatment efficiencies were achieved (color, 100%; chemical oxygen demand (COD), 98%; biochemical oxygen demand (BOD5), 96%; suspended solids (SS), 100%). Furthermore, the MBR treatment efficiency was analyzed from a toxicological-risk assessment point of view, via different In vitro bioassays using Caco-2 cells, a widely used cell model in toxicological studies. Results showed that MBR treatment significantly reduced the raw textile wastewater (RTWW) cytotoxicity on Caco-2 cells by 53% for a hydraulic retention time (HRT) of 2 days. Additionally, the RTWW-induced disruption in the barrier function (BF) of the Caco-2 cell monolayer was also significantly reduced after MBR treatment under a HRT of 2 days (no disruption of BF was observed). Moreover, the effect of RTWW and treated wastewater on stress response was investigated using different stress genes: AHSA1, HSPD1, HSPA1A, HSPA5 and HSPA8. The cell exposure to RTWW significantly increased the expression of all used stress genes; interestingly, the treated wastewater (HRT 2 days) did not show any significant modulation of the stress genes.

Optimization of process parameters for pilot-scale liquid-state bioconversion of sewage sludge by mixed fungal inoculation

Liquid-state bioconversion (LSB) technique has great potential for application in bioremediation of sewage sludge. The purpose of this study is to determine the optimum level of LSB process of sewage sludge treatment by mixed fungal (Aspergillus niger and Penicillium corylophilum) inoculation in a pilot-scale bioreactor. The optimization of process factors was investigated using response surface methodology based on Box-Behnken design considering hydraulic retention time (HRT) and substrate influent concentration (S0) on nine responses for optimizing and fitted to the regression model. The optimum region was successfully depicted by optimized conditions, which was identified as the best fit for convenient multiple responses. The results from process verification were in close agreement with those obtained through predictions. Considering five runs of different conditions of HRT (low, medium and high 3.62, 6.13 and 8.27 days, respectively) with the range of S0 value (the highest 12.56 and the lowest 7.85 g L(-1)), it was monitored as the lower HRT was considered as the best option because it required minimum days of treatment than the others with influent concentration around 10 g L(-1). Therefore, optimum process factors of 3.62 days for HRT and 10.12 g L(-1) for S0 were identified as the best fit for LSB process and its performance was deviated by less than 5% in most of the cases compared to the predicted values. The recorded optimized results address a dynamic development in commercial-scale biological treatment of wastewater for safe and environment-friendly disposal in near future.

Treatment of heavy oil wastewater by UASB-BAFs using the combination of yeast and bacteria

A novel system integrating an upflow anaerobic sludge blanket (UASB) reactor and a two-stage biological aerated filter (BAF) system was investigated as advanced treatment of heavy oil wastewater with large amounts of dissolved recalcitrant organic substances and low levels of nitrogen and phosphorus nutrients. #1 BAF, inoculated with two yeast strains (Candida tropicalis and Rhodotorula dairenensis), was installed in the upper reaches of #2 BAF inoculated with activated sludge. During the 180-day study period, the chemical oxygen demand (COD), ammonia nitrogen (NH3-N), oil and polyaromatic hydrocarbons (PAHs) in the wastewater were removed by 90.2%, 90.8%, 86.5% and 89.4%, respectively. Although the wastewater qualities fluctuated and the hydraulic retention time continuously decreased, the effluent quality index met the national discharge standard steadily. The UASB process greatly improved the biodegradability of the wastewater, while #1 BAF played an important role not only in degrading COD but also in removing oil and high molecular weight PAHs. This work demonstrates that the hybrid UASB-BAFs system containing yeast-bacteria consortium has the potential to be used in bioremediation of high-strength oily wastewater.

Enhanced bio-decolorization of 1-amino-4-bromoanthraquinone-2-sulfonic acid by Sphingomonas xenophaga with nutrient amendment

Bacterial decolorization of anthraquinone dye intermediates is a slow process under aerobic conditions. To speed up the process, in the present study, effects of various nutrients on 1-amino-4-bromoanthraquinone-2-sulfonic acid (ABAS) decolorization by Sphingomonas xenophaga QYY were investigated. The results showed that peptone, yeast extract and casamino acid amendments promoted ABAS bio-decolorization. In particular, the addition of peptone and casamino acids could improve the decolorization activity of strain QYY. Further experiments showed that l-proline had a more significant accelerating effect on ABAS decolorization compared with other amino acids. l-Proline not only supported cell growth, but also significantly increased the decolorization activity of strain QYY. Membrane proteins of strain QYY exhibited ABAS decolorization activities in the presence of l-proline or reduced nicotinamide adenine dinucleotide, while this behavior was not observed in the presence of other amino acids. Moreover, the positive correlation between l-proline concentration and the decolorization activity of membrane proteins was observed, indicating that l-proline plays an important role in ABAS decolorization. The above findings provide us not only a novel insight into bacterial ABAS decolorization, but also an l-proline-supplemented bioaugmentation strategy for enhancing ABAS bio-decolorization.

Biodegradation of naphthalenesulphonate polymers: the potential of a combined application of fungi and bacteria

The potential of several fungi and their synergy with bacterial biomasses were evaluated as a solution for the removal of 2-naphthalensulphonic acid polymers (2-NSAPs) from petrochemical wastewater, characterized by a chemical oxygen demand (COD) greater than 9000 mg/L. The ability of fungi to grow on 2-NSAP mixtures was preliminarily investigated using a solid medium, and then the action of the selected strains, both in suspended and immobilized form, was evaluated in terms of degradation, depolymerization, sorption and an increase in biodegradability of 2-NSAP. Among the 25 fungi evaluated two, in particular, Bjerkandera adusta and Pleurotus ostreatus, have been found to significantly depolymerize 2-NSAP yielding to the corresponding monomer (2-naphthalenesulphonic acid, 2-NSA), which has been further degraded by a bacterial consortia selected in a wastewater treatment plant (WWTP). The fungal treatment alone was able to reduce the COD value up to 44%, while activated sludge removed only 9% of the initial COD. In addition, the combined treatment (fungi and bacteria) allowed an increase in the COD removal up to 62%.

Assessment of sewage sludge bioremediation at different hydraulic retention times using mixed fungal inoculation by liquid-state bioconversion

Sustainable, environmental friendly, and safe disposal of sewage treatment plant (STP) sludge is a global expectation. Bioremediation performance was examined at different hydraulic retention times (HRT) in 3-10 days and organic loading rates (OLR) at 0.66-7.81 g chemical oxygen demand (COD) per liter per day, with mixed filamentous fungal (Aspergillus niger and Penicillium corylophilum) inoculation by liquid-state bioconversion (LSB) technique as a continuous process in large-scale bioreactor. Encouraging results were monitored in treated sludge by LSB continuous process. The highest removal of total suspended solid (TSS), turbidity, and COD were achieved at 98, 99, and 93%, respectively, at 10 days HRT compared to control. The minimum volatile suspended solid/suspended solid implies the quality of water, which was recorded 0.59 at 10 days and 0.72 at 3 days of HRT. In treated supernatant with 88% protein removal at 10 days of HRT indicates a higher magnitude of purification of treated sludge. The specific resistance to filtration (SRF) quantifies the performance of dewaterability; it was recorded minimum 0.049 × 10(12) m kg(-1) at 10 days of HRT, which was equivalent to 97% decrease of SRF. The lower OLR and higher HRT directly influenced the bioremediation and dewaterability of STP sludge in LSB process. The obtained findings imply encouraging message in continuing treatment of STP sludge, i.e., bioremediation of wastewater for environmental friendly disposal in near future.

Integrated fungal biomass and activated sludge treatment for textile wastewaters bioremediation

A combined biological process was investigated for effective textile wastewater treatment. The process consisted of a first step performed by selected fungal biomasses, mainly devoted to the effluent decolourisation, and of a subsequent stage by means of activated sludge, in order to reduce the remaining COD and toxicity. In particular, the treatment with Trametes pubescens MUT 2400, selected over nine strains, achieved very good results in respect to all parameters. The final scale-up phase in a moving bed bioreactor with the supported biomass of the fungus allowed to verify the effectiveness of the treatment with high volumes. Despite promising results, further steps must be taken in order to optimize the use of these biomasses for a full exploitation of their oxidative potential in textile wastewater treatment.

Interspecific interactions in mixed microbial cultures in a biodegradation perspective

In recent works, microbial consortia consisting of various bacteria and fungi exhibited a biodegradation performance superior to single microbial strains. A highly efficient biodegradation of synthetic dyes, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and other organic pollutants can be achieved by mixed microbial cultures that combine degradative enzyme activities inherent to individual consortium members. This review summarizes biodegradation results obtained with defined microbial cocultures and real microbial consortia. The necessity of using a proper strategy for the microbial consortium development and optimization was clearly demonstrated. Molecular genetic and proteomic techniques have revolutionized the study of microbial communities, and techniques such as the denaturing gradient gel electrophoresis, rRNA sequencing, and metaproteomics have been used to identify consortium members and to study microbial population dynamics. These analyses could help to further enhance and optimize the natural activities of mixed microbial cultures.

The use of the fungus Dichomitus squalens for degradation in rotating biological contactor conditions

Biodegradation potential of Dichomitus squalens in biofilm cultures and rotating biological contactor (RBC) was investigated. The fungus formed thick biofilms on inert and lignocellulosic supports and exhibited stable activities of laccase and manganese peroxidase to reach 40-62 and 25-32% decolorization of anthraquinone Remazol Brilliant Blue R and heterocyclic phthalocyanine dyes, respectively. The decolorization ceased when glucose concentration dropped to 1 mmol l(-1). In RBC reactor, respective decolorizations of Remazol Brilliant Blue R and heterocyclic Methylene Blue and Azure B dyes (50 mg l(-1)) attained 99%, 93%, and 59% within 7, 40 and 200 h. The fungus exhibited tolerance to coliform and non-coliform bacteria on rich organic media, the inhibition occurred only on media containing tryptone and NaCl. The degradation efficiency in RBC reactor, capability to decolorize a wide range of dye structures and tolerance to bacterial stress make D. squalens an organism applicable to remediation of textile wastewaters.

Immobilized redox mediators for electrochemical NAD(P)+ regeneration

The applicability of dissolved redox mediators for NAD(P)(+) regeneration has been demonstrated several times. Nevertheless, the use of mediators in solutions for sensor applications is not a very convenient strategy since the analysis is not reagentless and long stabilization times occur. The most important drawbacks of dissolved mediators in biocatalytic applications are interferences during product purification, limited reusability of the mediators, and their cost-intensive elimination from wastewater. Therefore, the use of immobilized mediators has both economic and ecological advantages. This work critically reviews the current state-of-art of immobilized redox mediators for electrochemical NAD(P)(+) regeneration. Various surface modification techniques, such as adsorption polymerization and covalent linkage, as well as the corresponding NAD(P)(+) regeneration rates and the operational stability of the immobilized mediator films, will be discussed. By comparison with other existing regeneration systems, the technical potential and future perspectives of biocatalytic redox reactions based on electrochemically fed immobilized mediators will be assessed.

Anaerobic degradation of textile dye bath effluent using Halomonas sp

The main objective of this work is to reduce the chemical oxygen demand (COD) and color of the effluent containing reactive textile dye by microbial method. Anaerobic digestion has the potential to break down complex refractory organic compounds so that they may be further degraded aerobically or to completely mineralize them. An anaerobic digestion technique was applied to synthetic reactive red 2 dye cotton textile effluent aiming at the dye degradation. Halophilic and halotolerant bacterial culture Halomonas variabilis and Halomonas glaciei were used for degradation in batch-mode static condition. The temperature was kept constant at 30°C using CO(2) incubator. Maximum degradation was achieved within 144 h of experimental run. Degradation studies were made by determining COD and biochemical oxygen demand (BOD). Statistical analysis showed that the BOD and COD reduction rate were optimal in the concentration of 1297 mg L(-1) for the time duration of nearly 100 h.

Wastewater treatment by alkali bacteria and dynamics of microbial communities in two bioreactors

In this study, an alkali bacterial consortium was obtained by enrichment cultivation and was used to treat printing and dyeing wastewater (PDW, pH 11-12). The treatment effects and dynamic changes were evaluated in a biocontact oxidation reactor (BOR) and a sequencing batch reactor (SBR). During 3 months of continuous operation, the two bioreactors had similar treatment efficiencies (polyvinyl alcohol, PVA, 74.5-81.3%; COD, 73.5-77.4%; 2.15 pH decreases). Molecular biological analysis indicated that the microbial communities underwent dramatic changes during the operation, in which the SBR was superior to the BOR in retaining the alkali bacteria at the start-up stage, however, the BOR seemed to be more advantageous when the frequently changing influents were considered. The bacterial communities in BOR and SBR were diverse and included Bacteroidetes, Firmicutes, Proteobacteria, Actinobacteria and an unidentified cluster. Among these only Paracoccus sp. was successfully isolated and confirmed to have the ability to degrade PVA.