Uptake of gold (III) from waste gold solution onto biomass-based adsorbents organophosphonic acid functionalized spent buckwheat hulls

Dynamics modeling of multicomponent metal ions' removal onto low-cost buckwheat hulls

The process of adsorption from water solutions containing a ternary system of Cu (II), Zn (II), and Ni (II) ions onto buckwheat hulls as a biosorbent was considered. The sorption capacity for buckwheat hulls was determined in sorption equilibrium batch experiments. The sorption kinetics equation corresponding to the mechanism of metal ions with the adsorbent was assumed. A new method for modeling sorption in a packed column was presented. A system of partial differential equations describing the mass balance, due to the assumption of a properly defined variable, was transformed into a system of ordinary nonlinear equations, which enables the identification of object parameters. The sorption capacity of the sorbent, sorption isotherms, and kinetics equations were used in dynamics modeling.

Selective Mineralization and Recovery of Au(III) from Multi-Ionic Aqueous Systems by Bacillus licheniformis FZUL-63

The recovery of precious metals is a project with both economic and environmental significance. In this paper, how to use bacterial mineralization to selectively recover gold from multi-ionic aqueous systems is presented. The Bacillus licheniformis FZUL-63, isolated from a landscape lake in Fuzhou University, was shown to selectively mineralize and precipitate gold from coexisting ions in aqueous solution. The removal of Au(III) almost happened in the first hour. Scanning electron microscope with X-ray energy dispersive spectroscopy (SEM/EDS-mapping) results and fourier transform infrared spectroscopy (FTIR) data show that the amino, carboxyl, and phosphate groups on the surface of the bacteria are related to the adsorption of gold ions. X-ray photoelectron spectroscopy (XPS) results implied that Au(III) ions were reduced to those that were monovalent, and the Au(I) was then adsorbed on the bacterial surface at the beginning stage (in the first hour). X-ray diffraction (XRD) results showed that the gold biomineralization began about 10 h after the interaction between Au(III) ions and bacteria. Au(III) mineralization has rarely been influenced by other co-existing metal ions. Transmission electron microscope (TEM) analysis shows that the gold nanoparticles have a polyhedral structure with a particle size of ~20 nm. The Bacillus licheniformis FZUL-63 could selectively mineralize and recover 478 mg/g (dry biomass) gold from aqua regia-based metal wastewater through four cycles. This could be of great potential in practical applications.

Layer-by-layer assembly surface modified microbial biomass for enhancing biorecovery of secondary gold

Enhancement of the biosorption capacity for gold is highly desirable for the biorecovery of secondary gold resources. In this study, polyethylenimine (PEI) was grafted on Shewanella haliotis surface through layer-by-layer assembly approach so as to improve the biosorption capacity of Au(III). Results showed that the relative contribution of amino group to the biosorption of Au(III) was the largest one (about 44%). After successful grafting 1, 2 and 3-layer PEI on the surface of biomass, the biosorption capacity significantly enhanced from 143.8mg/g to 597.1, 559.1, and 536.8mg/g, respectively. Interestingly, the biomass modified with 1-layer PEI exhibited 4.2 times higher biosorption capacity than the untreated control. When 1-layer modified biomass was subjected to optimizing the various conditions by response surface methodology, the theoretical maximum adsorption capacity could reach up to 727.3mg/g. All findings demonstrated that PEI modified S. haliotis was effective for enhancing gold biorecovery.

Ruthenium recovery from acetic acid industrial effluent using chemically stable and high-performance polyethylenimine-coated polysulfone-Escherichia coli biomass composite fibers

Recovery of precious metal ions from waste effluents is of high concern. In general, ruthenium (Ru) is used in the Cativa process as promoter for carbonylation catalyst and discharged into acetic acid effluent. In the present work, we have designed and developed polyethylenimine-coated polysulfone-bacterial biomass composite fiber (PEI-PSBF) to recover Ru from industrial effluent. The sorbent was manufactured by electrostatic attachment of polyethylenimine (PEI) to the surface of polysulfone-biomass composite fiber (PSBF), which was prepared through spinning of the mixture of polysulfone and Escherichia coli biomass in N,N-dimethylformamide (DMF) into water. Developed PEI-PSBF was highly stable in the acetic acid effluent. The maximum sorption capacity of the developed sorbent PEI-PSBF, coated with PEI (with M.W. of 75,000), was 121.28±13.15mg/g, which was much higher than those of ion exchange resins, TP214, Amberjet 4200, and M500. The PEI-PSBF could be successfully applied in the flow-through column system, showing 120 beds of breakthrough volume.

Biorecovery of gold as nanoparticles and its catalytic activities for p-nitrophenol degradation

Recovery of gold from aqueous solution using simple and economical methodologies is highly desirable. In this work, recovery of gold as gold nanoparticles (AuNPs) by Shewanella haliotis with sodium lactate as electron donor was explored. The results showed that the process was affected by the concentration of biomass, sodium lactate, and initial gold ions as well as pH value. Specifically, the presence of sodium lactate determines the formation of nanoparticles, biomass, and AuCl4 (-) concentration mainly affected the size and dispersity of the products, reaction pH greatly affected the recovery efficiency, and morphology of the products in the recovery process. Under appropriate conditions (5.25 g/L biomass, 40 mM sodium lactate, 0.5 mM AuCl4 (-), and pH of 5), the recovery efficiency was almost 99 %, and the recovered AuNPs were mainly spherical with size range of 10-30 nm (~85 %). Meanwhile, Fourier transforms infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that carboxyl and amine groups might play an important role in the process. In addition, the catalytic activity of the AuNPs recovered under various conditions was testified by analyzing the reduction rate of p-nitrophenol by borohydride. The biorecovered AuNPs exhibited interesting size and shape-dependent catalytic activity, of which the spherical particle with smaller size showed the highest catalytic reduction activity with rate constant of 0.665 min(-1).

Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process

A review on the application of response surface methodology (RSM) and artificial neural networks (ANN) in biosorption modelling and optimization is presented. The theoretical background of the discussed methods with the application procedure is explained. The paper describes most frequently used experimental designs, concerning their limitations and typical applications. The paper also presents ways to determine the accuracy and the significance of model fitting for both methodologies described herein. Furthermore, recent references on biosorption modelling and optimization with the use of RSM and the ANN approach are shown. Special attention was paid to the selection of factors and responses, as well as to statistical analysis of the modelling results.

Biosorbents for recovery of precious metals

Biosorption is a promising technology not only for the removal of heavy metals and dyes but also for the recovery of precious metals (PMs) from solution phases. The biosorptive recovery of PMs from waste solutions and secondary resources is recently getting paid attractive attention because their price is increasing or fluctuating, their available deposit is limited and maldistributed, and high-tech industries need more consumption of PMs. The biosorbents for recovery of PMs require specifications which differ from those for the treatment of wastewaters containing heavy metals and dyes. In this review, the previous works on biosorbents and biosorption for recovery of PMs were summarized. Especially, we discuss and suggest the required specifications of biosorbents for recovery of PMs and strategies to give the required properties to the biosorbents. We believe this review will provide useful information to scientists and engineers and hope to give insights into this research frontier.

Utilization of rice husks modified by organomultiphosphonic acids as low-cost biosorbents for enhanced adsorption of heavy metal ions

Novel biosorbent materials (RH-2 and RH-3) obtained from agricultural waste materials rice husks (RH-1) were successfully developed through fast and facile esterification reactions with hydroxylethylidenediphosphonic acid and nitrilotrimethylenetriphosphonic acid, respectively. The present paper reported the feasibility of using RH-1, RH-2 and RH-3 for removal of heavy metals from simulated wastewater, the results revealed that the adsorption property of functionalized rice husks with organotriphosphonic acid RH-3 for Au(III) was very excellent, especially for gold ions. The combined effect of initial solution pH, RH-3 dosage and initial Au(III) concentration was investigated using response surface methodology (RSM), the results showed that initial Au(III) concentration exerted stronger influence on Au(III) uptake than initial pH and biomass dosage. The analysis of variance (ANOVA) of the quadratic model demonstrated that the model was highly significant, and under the optimum process conditions, the maximum adsorption capacity could reach 3.25 ± 0.07 mmol/g that is higher than other reported adsorbents.

Novel magnetic beads based on sodium alginate gel crosslinked by zirconium(IV) and their effective removal for Pb²⁺ in aqueous solutions by using a batch and continuous systems

Novel magnetic sodium alginate gel beads (Fe3O4@SA-Zr) were successfully prepared by using zirconium(IV) as crosslinking ions, and used as adsorbent for removal of Pb(2+) ions from aqueous solutions in batch and fixed-bed column systems. Fe3O4@SA-Zr was characterized by SEM, FT-IR, XRD and VSM. Fe3O4@SA-Zr had the macroporous structure, exhibited greater stability and possessed a sensitive magnetic response. More importantly, Fe3O4@SA-Zr exhibited high adsorption capacity, fast kinetics and high selectivity towards Pb(2+) ions. Experimental data was well described by Langmuir isotherm with a maximum adsorption capacity of 333.33 mg/g. FTIR and XPS indicated that the carboxyl and hydroxyl groups of SA and hydroxyl groups binding to Fe and Zr species were involved in Pb(2+) adsorption. Fixed-bed column packed with Fe3O4@SA-Zr exhibited higher removal efficiency for Pb(2+)ions. Consequently, Fe3O4@SA-Zr with excellent absorbability, stability and reusability could be used as a promising adsorbent for Pb(2+) removal in wastewaters.