Sulfur defect-engineered Bi2S3-x/In2S3-y mediated signal enhancement of photoelectrochemical sensor for lead ions detection

Lead ions (Pb2+) are heavy metal ions that are harmful to living organisms and ecosystems. It is important to realize sensitive detection of Pb2+ in the environment. In this study, a signal enhancement photoelectrochemical (PEC) sensor with high sensitivity was constructed for the detection of Pb2+. Firstly, to obtain excellent electron transfer performance, sulfur defect-engineered Bi2S3-x/In2S3-y mediated signal enhancement formed by Bi2S3 and In2S3 with well-matched structure in terms of energy level as the substrate materials. In this case, the introduction of sulfur vacancies further affects the electronic structure of the material, which significantly improves the electrical conductivity and effectively increases the electron transfer rate. In addition, the as-synthesized Cu@Cu2O nanosphere is chosen as the marker to accelerate the electron transfer through the surface plasmon resonance effect of Cu. The constructed sensor was able to detect Pb2+ in the range of 1 ng mL-1-100 μg mL-1 with a limit of detection of 19.2 pg mL-1. The sensor exhibits good reproducibility, specificity, and stability, indicating such PEC sensor can achieve the sensitive detection of Pb2+ in the environment. This work paves a new way for the construction of PEC sensors and the specific PEC detection of Pb2+ in environmental waters.

Recovery of biochar particles laden with lead in saturated porous media by DC electric field

The co-transport behavior of environmental pollutants with biochar particles has aroused great interests from researchers due to the concerns about pollutant diffusion and environmental exposure after biochar is applied to soil. In this work, the recovery and co-transport behavior of biochar micron-/nano-particles (BCMP and BCNP) and lead (Pb2+) in saturated porous media were investigated under different ionic strength conditions (IS = 1, 5 and 10 mM) under a direct current electric field. The results showed that the electric field could significantly enhance the mobility of Pb adsorbed biochar particles, particularly BCNP. The recovery of Pb laden biochar particles was improved by 1.8 folds, reaching 78.8% at maximum under favorable condition at +0.5 V cm-1. According to the CDE (Convection-Dispersion-Equation) model and DLVO (Derjaguin-Landau-Verwey-Overbeek) theory analysis, the electric field facilitated the transport of Pb carried biochar mainly by increasing the negative charges on biochar surface and improving the repulsive force between biochar and porous media. High IS was favorable for biochar transport under the electric field, but inhibited desorbing Pb2+ from biochar (18% by maximum at IS = 10 mM). By switching the electric field power, a two-stage strategy was established to maximize the recovery of both biochar particles and Pb, where BCNP and Pb recovery were higher than electric field free case by 90% and 35%, respectively. The findings of this study can help build a biochar recovery approach to prevent potential risks from biochar application in heavy metal contaminated soil remediation.

The interfacial interaction between typical microplastics and Pb2+ and their combined toxicity to Chlorella pyrenoidosa

Microplastics (MPs), a new type of pollutant, have attracted much attention worldwide. MPs are often complexed with other pollutants such as heavy metals, resulting in combined toxicity to organisms in the environment. Studies on the combined toxicity of MPs and heavy metals have usually focused on the marine, while on the freshwater are lacking. In order to understand the combined toxic effects of MPs and heavy metals in the freshwater, five typical MPs (PVC, PE, PP, PS, PET) were selected to investigate the adsorption characteristics of MPs to Pb2+ before and after the MPs aging by ultraviolet (UV) irradiation through static adsorption tests. The results showed that UV aging enhanced adsorption of Pb2+ by MPs. It is noteworthy that MPs-PET had the highest adsorption capacity for Pb2+, and the interaction between MPs-PET and Pb2+ was the strongest. We specifically selected MPs-PET to study its combined toxicity with Pb2+ to Chlorella pyrenoidosa. In the combined toxicity test, MPs-PET and Pb2+ had significant toxic effects on Chlorella pyrenoidosa in the individual exposure, and the toxicity of individual Pb2+ exposure was greater than that of individual MPs-PET exposure. In the combined exposure, when MPs-PET and Pb2+ without adsorption (MPs-PET/Pb2+), MPs-PET and Pb2+ had a synergistic effect, which would produce strong physical and chemical stress on Chlorella pyrenoidosa simultaneously, and the toxic effect was the most significant. After the adsorption of MPs-PET and Pb2+ (MPs-PET@Pb2+), the concentration and activity of Pb2+ decreased due to the adsorption and fixation of MPs-PET, and the chemical stress on Chlorella pyrenoidosa was reduced, but the physical stress of MPs-PET still existed and posed a serious threat to the survival of Chlorella pyrenoidosa. This study has provided a theoretical basis for further assessment of the potential environmental risks of MPs in combination with other pollutants such as heavy metals.

A colorimetric and fluorescent dual-mode sensor based on bifunctional G-quadruplex-hemin complex for the determination of Pb2

Due to the threat of lead pollution to health, environmental and food safety, developing simple and fast detection methods is highly required. Whereas, traditional single-mode probe suffers from limited application scenario. In this study, a colorimetric and fluorometric dual-mode probe for Pb2+ determination was constructed by using bifunctional G-quadruplex-hemin complex. In this dual-mode probe, enzyme strand and substrate strand of 8-17 DNAzyme are labeled with G-quadruplex-hemin complex and fluorophore, respectively. In the absence of Pb2+, the self-assembly of enzyme strand and substrate strand inhibits intrinsic mimic peroxidase of G-quadruplex-hemin complex by base-pairing, which also quench the fluorescence via in proximity effect. When the DNAzyme is activated by Pb2+, the quenched fluorescence is restored as well as the inherent peroxidase mimetic activity, leading to dual signal output. Under optimal conditions, this dual-mode probe exhibit a good linear relationship between logarithm of Pb2+ concentration and signal difference within the range from 1.5 nM to 20 nM and 0.5 nM to 10 nM for colorimetric and fluorescence mode, respectively. The detection limits for the corresponding mode were estimated to be 1.29 nM and 0.16 nM, respectively. This dual-mode probe also successfully applied for the spiked river water assay with satisfactory recovery in the range of 93.2 %-115.3 %. This work paves a new way for DNAzyme based dual-mode probe construction.

Near-infrared spectroscopy bioprobe estimation of metabolites' responses to Pb2+ in Cladophora rupestris

Near-infrared (NIR) spectroscopy was used as a bioprobe to estimation chlorophyll, total sugar, proline, and metallothionein (MT) response to Pb2+ (0, 1, 2.5, 5, 7.5, 10, and 20 mg/l) in Cladophora rupestris. Spectra between 3775.94 and 12315.19 cm-1 were analysed using a partial least-squares regression (PLS). Principal component analysis (PCA) was performed by evaluating the distance between the C. rupestris samples treated with different concentrations of Pb2+. Results showed that 4000-7500 cm-1 of raw NIR spectra from C. rupestris was linked to carbohydrates and stretching of N-H, and the O-H overtone was associated with proline and MT. NIR spectroscopy technique coupled with PLS quantitative analysis model has high potential. Multiplicative scatter correction and standard normal variate combining first-order derivative with S-G smoothing filter are superior to the other models. The root mean square error of cross of chlorophyll, total sugar, proline, and MT was 0-1, indicating the accuracy of the model is high. The Rc2 values of chlorophyll, total soluble sugar, proline, and MT between measured and predicted values were higher than 0.99. PCA analysis indicate clear boundaries in the spatial distributions of seven Pb2+ concentrations, indicating that NIR spectroscopy has high potential as a tool assisting bioprobes for estimating metabolites' responses to Pb2+ in Cladophora rupestris.

Wood aerogels decorated amino-functionalized MIL-101(Cr) as efficient filter for multistage purification of wastewater

Exploring novel water purifier to efficiently remove heavy metal ions from the wastewater is of vital importance. Inspired by the hierarchical structure of natural wood and the chelation of amino group, a high-efficiency water purifier with ethylenediamine functionalized MIL-101(Cr) octahedrons anchored on the wood aerogel (MIL-101(Cr)-ED/WA) was constructed. Benefiting from the two-pronged approach with the hierarchical structure of the wood aerogel frame for multistage filtration and the -NH2 that capable of chelation with metal ions, the fabricated MIL-101(Cr)-ED/WA exhibits excellent water purification performances, and its adsorption capacity of toxic Pb2+ ions could reach up to 6.46 mmol g-1. Furthermore, it demonstrates superior recyclability without secondary pollution and is also suitable for simultaneous treatment of multiple metal species. In general, this work will broaden the utilization of wood-based structural engineering materials in the treatment of heavy metal wastewater.

Efficient extraction performance and mechanisms of Cd2+ and Pb2+ in water by novel dicationic ionic liquids

Ten novel hydrophobic dicationic ionic liquids (DILs) were synthesized and applied for the extraction of heavy metals in aqueous solutions. Their physicochemical properties were measured at ambient temperature, and the leaching behaviors of the as-prepared DILs in water were assessed by TOC analysis. Metal extraction experiments were carried out to evaluate the extraction performances of the DILs. It was found that the extraction rates of up to 0.45 and 0.53 mg·(g·min)-1 were achieved with 100 mg DILs for 5 mL of 5 mg/L Cd2+ and Pb2+ solutions. Besides, the extraction efficiencies of Cd2+ and Pb2+ were respectively up to 95.48% and 98.46%, when the volumes of the simulated wastewater were expanded by a factor of 20 at a constant extraction phase ratio (1000 mg DILs for 50 mL of 5 mg/L Cd2+ or Pb2+ solutions). The reusability of the novel DILs was successfully proved by the back-extraction experiments with 0.5 M HNO3. Finally, taking Cd2+ extraction as an example, the extraction mechanism based on FTIR analysis and quantum chemical calculations showed that both S and O atoms in the anions of DILs had physical and quasi-chemical interactions with Cd2+, which were stronger than the electrostatic attraction.

Preparation, characterization, and adsorption performance of porous polyamine lignin microsphere

In this study, a porous polyamine lignin microsphere (PPALM) was prepared through the inverse suspension polymerization combined with freeze-drying, during which sodium lignosulfonate and polyetheramine (PEA) were crosslinked with epichlorohydrin (ECH) as the cross-linker. By adjusting the amount of ECH and PEA, the optimized PPALM exhibited suitable crosslinking degree, ensuring a balance of framework flexibility and rigidity, thereby facilitating the formation of abundant and fine pores. PPALM demonstrated good mechanical properties comparable to commercial sulfonated polystyrene cationic resin, with a porosity of 61.12 % and an average pore size of 283.51 nm. The saturation adsorption capacity of PPALM for Pb2+ was measured to be 156.82 mg/g, and it remained above 120 mg/g after five cycles of regeneration. Particularly, the concentration of 50 mg/L Pb2+ solution could be reduced to 0.98 mg/L after flowing through the PPALM packed bed, indicating the great potential of PPALM for application in wastewater treatment.

Fluorescent silica nanoparticles as nano-chemosensors for the sequential detection of Pb2+ ions and bacterial-spore biomarker dipicolinic acid (DPA) in aqueous solution

Herein, we report fluorescein-labelled silica nanoparticles (FSNP) which serve as fluorescent nano-chemosensors for sequential detection of Pb2+ (which is a toxic heavy metal) and dipicolinic acid (DPA) (which is a distinctive indicator biomarker of bacterial spores) with high sensitivity and selectivity. The fluorescence of FSNP is quenched because of the complex formation between Pb2+ ions and surface amide groups, however, the fluorescence is recovered in contact with DPA, resulting from the association of DPA with surface bound Pb2+ ions. FSNP-Pb2+ complexes show high sensitivity towards DPA with a low detection limit of 850 nM which is approximately seventy times lower than the infectious dosage of bacterial spores (60 μM). Lateral flow test platform was further developed to show the applicability and practicability of our system.

Co-transport behavior and Trojan-horse effect of colloidal microplastics with different functional groups and heavy metals in porous media

The emerging global problems of microplastics pollution and their co-occurrence with other pollutants have presented major new challenges for environmental health and protection. This study used column experiments to investigate the co-transport behavior and Trojan-horse effect of colloidal microplastics (non-functional polystyrene microspheres (MS), carboxyl-modified polystyrene microspheres (CMS) and sulfonate-modified polystyrene microspheres (SMS)) and lead (Pb) in porous media. Results showed that a Trojan-horse effect occurred during the co-transport of colloidal microplastics and Pb. In the process of co-transport, colloidal microplastics and Pb mutually inhibited each other's transport at an ionic strength of 1 mM, which may be due to Pb absorption by microplastics, resulting in the destabilization of agglomerates and a reduction in the electronegativity of microplastics. At an ionic strength of 100 mM, colloidal microplastics and Pb promoted each other's transport, potentially due to their competition for adsorption in porous media. The functional groups present on colloidal microplastics inhibited the transport of Pb at low ionic strengths, while at high ionic strengths Pb transport was promoted. Furthermore, deposition experiments verified that quartz crystal microbalance with dissipation (QCM-D) monitoring could effectively account for and predict the transport and deposition behavior of microplastics in the presence or absence of Pb.

A triple amplification strategy using GR-5 DNAzyme as a signal medium for ultrasensitive detection of trace Pb2+ based on CRISPR/Cas12a empowered electrochemical biosensor

Lead ions (Pb²⁺) are a well-known toxic heavy metal that poses a significant threat to human health. Therefore, the development of a simple and ultrasensitive technique for detecting Pb²⁺ is essential. With their trans-cleavage properties, the newly discovered CRISPR-V effectors have become a potential high-precision biometric tool. In this regard, a CRISPR/Cas12a-based electrochemical biosensor (E-CRISPR) has been developed, which is combined with the GR-5 DNAzyme that can specifically recognize Pb²⁺. In this strategy, the GR-5 DNAzyme acts as a signal-mediated intermediary, which can convert Pb²⁺ into nucleic acid signals, thereby becoming single-stranded DNA that triggers strand displacement amplification (SDA) reaction. This is coupled with following activated CRISPR/Cas12a cleavage of the electrochemical signal probe, enabling cooperative signal amplification for ultrasensitive Pb²⁺ detection. The proposed method has a detection limit as low as 0.02 pM. Therefore, we have developed an E-CRISPR detection platform with GR-5 DNAzyme as a signal medium (called SM-E-CRISPR biosensor). This provides a method for the CRISPR system to specifically detect non-nucleic substances by converting the signal using a medium.

Toxicity of polystyrene nanoplastics to human embryonic kidney cells and human normal liver cells: Effect of particle size and Pb2+ enrichment

Nanoplastics pollution in drinking water has aroused wide concern, but their effects on human health are still poorly understood. Herein we explore the responses of human embryonic kidney 293T cells and human normal liver LO2 cells to polystyrene nanoplastics, mainly focusing on the effects of particle sizes and enrichment of Pb²⁺. When the exposed particle size is higher than 100 nm, there is no obvious death for these two different cell lines. As the particle size decreases from 100 nm, cell mortality goes up. Although the internalization of polystyrene nanoplastics in LO2 cells is at least 5 times higher than that in 293T cells, the mortality of LO2 cells is lower than that of 293T cells, illustrating that LO2 cells are more resistant to polystyrene nanoplastics than 293T cells. Additionally, the Pb²⁺ enrichment on polystyrene nanoplastics in water can further enhance their toxicity, which should be taken seriously. The cytotoxicity of polystyrene nanoplastics to cell lines works through a molecular mechanism involving oxidative stress-induced damage of mitochondria and cell membranes, resulting in a decrease in ATP production and an increase in membrane permeability. Referenced to nanoplastics pollution in drinking water, there is no necessary to panic about the adverse effects of plastic itself on human health, but the enrichment of contaminants should get more attention. This work provides a reference for the risk assessment of nanoplastics in drinking water to human health.

Physicochemical properties and Pb2+ adsorption capacity of freeze-dried hawthorn pectin fractions by gradient ethanol precipitation

Three fractions of FHP20, FHP40 and FHP60 were obtained from freeze-dried hawthorn pectin by gradient ethanol precipitation (20-60 %), and their physicochemical properties and adsorption performance on Pb²⁺ were investigated. It was found that the content of galacturonic acid (GalA) and esterification of FHP fractions gradually reduced with the increase of ethanol concentration. FHP60 had the lowest molecular weight (60.69 × 10³ Da), and the composition and proportion of monosaccharides were significantly different. The experimental results of Pb²⁺ adsorption showed that the adsorption process fitted well with the Langmuir monolayer adsorption and the pseudo-second-order models. Our findings suggested that pectin fractions with good homogeneity of molecular weight and chemical construction can be obtained by gradient ethanol precipitation, and hawthorn pectin could be developed as a potential adsorbent for Pb²⁺ removal.

From speciation study to removal of Pb2+ from natural waters by a carnosine-based polyacrylamide/azlactone copolymer

A deep speciation study on L-carnosine (CAR) and Pb²⁺ system was performed in aqueous solution with the aim to assess its potential use as a sequestering agent of metal cation. To determine the best conditions for Pb²⁺ complexation, potentiometric measurements were carried out over a wide range of ionic strength (0.15 ≤ I/≤ 1 mol/L) and temperature (15 ≤ T/°C ≤ 37), and thermodynamic interaction parameters (logβ, ΔH, ΔG and TΔS) were determined. The speciation studies allowed us to simulate sequestration ability of CAR toward Pb²⁺ under different conditions of pH, ionic strength and temperature and to establish a priori the conditions for the best removal performance, i.e., pH > 7 and I = 001 mol/L. This preliminary investigation was very useful in optimizing removal procedures and limiting subsequent experimental measurements for adsorption tests. Therefore, to exploit the binding ability of CAR for Pb²⁺ removal from aqueous solutions, CAR was covalently grafted on an azlactone-activated beaded-polyacrylamide resin (AZ) using an efficient click coupling reaction (78.3% of coupling efficiency). The carnosine-based resin (AZCAR) was analyzed by ThermoGravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Differential Thermal Analysis (DTA). Morphology, surface area and pore size distribution were studied through a combination of Scanning Electron Microscope (SEM) and adsorption/desorption of N₂ analyses according to the Brunauer-Emmett-Teller (BET) and Barret-Johner-Halenda (BJH) approaches. The adsorption capacity of AZCAR toward Pb²⁺ was investigated under conditions simulating the ionic strength and pH of different natural waters. The time needed to reach equilibrium in the adsorption process was 24 h, and the best performance was obtained at pH > 7, typical of most natural waters, with removal efficiency ranging from 90.8% (at I = 0.7 mol/L) to 99.0 (at I = 0.001 mol/L).

Gold nanocluster-confined covalent organic frameworks as bifunctional probes for electrochemiluminescence and colorimetric dual-response sensing of Pb2

The development of bifunctional signal probes based on a single component is highly desirable for sensitive and simple dual-mode detection of Pb²⁺. Here, novel gold nanocluster-confined covalent organic frameworks (AuNCs@COFs) were fabricated as a bisignal generator to enable electrochemiluminescence (ECL) and colorimetric dual-response sensing. AuNCs with both intrinsic ECL and peroxidase-like activity were confined into the ultrasmall pores of the COFs via an in situ growth method. On the one hand, the space-confinement effect of the COFs closed the ligand motion-induced nonradiative transition channels of the AuNCs. As a result, the AuNCs@COFs exhibited a 3.3-fold enhancement in anodic ECL efficiency compared to the solid-state aggregated AuNCs using triethylamine as the coreactant. On the other hand, due to the outstanding spatial dispersibility of the AuNCs in the structurally ordered COFs, a high density of active catalytic sites and accelerated electron transfer were obtained, leading to the promotion of the enzyme-like catalytic capacity of the composite. To validate its practical applicability, a Pb²⁺-triggered dual-response sensing system was proposed based on the aptamer-regulated ECL and peroxidase-like activity of the AuNCs@COFs. Sensitive determinations down to 7.9 pM for the ECL mode and 0.56 nM for the colorimetric mode were obtained. This work provides an approach for designing single element-based bifunctional signal probes for dual-mode detection of Pb²⁺.

Bifunctional collagen fiber/carbon quantum dot fluorescent adsorbent for efficient adsorption and detection of Pb2

In this work, fluorescent adsorbents that can efficiently detect and remove Pb²⁺ were developed by integrating the designed amino-modified carbon quantum dots and carboxyl-modified collagen. The adsorption properties of the fluorescent adsorbent were further optimized and analyzed using a series of response surface experiments. The maximum adsorption concentration for Pb²⁺ was 183 mg.g^-1. The adsorption isotherms fit well with the Langmuir model, and the adsorption kinetics fit with the pseudo-second-order model. The emission intensity of the fluorescent adsorbent gradually decreased with the increase of the concentration of Pb²⁺, and had a good linear correlation. In addition, the mechanism of detection and removal of Pb²⁺ by fluorescent adsorbents was further demonstrated. The novel three-dimensional structured fluorescent aerogel can be used as a promising adsorbent with good adsorption concentration and sensing ability for Pb²⁺, which shows great prospects in wastewater.

A ratiometric fluorescence platform for lead ion detection via RNA cleavage-inhibited self-assembly of three-arm branched junction

Heavy metal pollution can pose a threat to food safety and human health, and accurate quantification of heavy metal ions is a vital requirement. Emerging DNA nanostructures-based biosensors offer attractive tools toward ultra-sensitive or rapid analysis of heavy metal ions. However, the problems including complex design, severe reaction conditions and undesirable reliability are inevitable obstacle in advancing their extension and application. Herein, a ratiometric fluorescent platform was established for monitoring lead ion (Pb²⁺) in food based on dual Förster resonance energy transfer (FRET) and RNA cleavage-inhibited self-assembly of three-arm branched junction (TBJ). GR-5 DNAzyme was employed for Pb²⁺ recognition, and enzyme-free amplification technique catalytic hairpin assembly (CHA) served to form FRET probes-carried TBJ. The substrate strand (S) of DNAzyme triggered the generation of CHA-TBJ, and Pb²⁺-responsive cleavage of S hindered the assembly of CHA-TBJ, causing opposite changes in the FRET states of FAM/BHQ1 and ROX/BHQ2 pairs. The fluorescence responses were recorded through synchronous fluorescence spectrometry to indicate Pb²⁺ concentration, allowing sensitive and reliable identification of Pb²⁺ in the linear range of 0.05-5 ng mL^-1 with the detection limit of 0.03 ng mL^-1. The Pb²⁺ detection can be achieved under conventional reaction conditions, simple mixing procedures and one-step measurement operation. The approach can afford excellent specificity for Pb²⁺ against competing metal ions, and can be applied to analyze Pb²⁺ in tea samples with satisfactory results. This facile fluorescence platform shows a capable method for Pb²⁺ detection, and provides new avenue in the development of ratiometric approaches and DNAzyme strategies for monitoring heavy metal pollution, facilitating the transformation of DNAzyme-based biosensors for food safety control.

Antifouling improvement in Pb2+ ion selective electrodes by using an environmentally friendly capsaicin derivative

Biofouling is a critical issue for ion selective electrodes (ISE) in complex aqueous systems, seriously compromising the analytical performance of the electrodes (i.e., stability, sensitivity, and lifetime). Herein, an antifouling solid lead ion selective electrode (GC/PANI-PFOA/Pb²⁺-PISM) was successfully prepared by adding propyl 2-(acrylamidomethyl)-3,4,5-trihydroxy benzoate (PAMTB), an environmentally friendly capsaicin derivative, into the ion-selective membrane (ISM). The presence of PAMTB caused no loss in the detection performance of GC/PANI-PFOA/Pb²⁺-PISM (e.g., detection limit (1.9 × 10^-7 M), response slope (28.5 ± 0.8 mV/decade), the response time (20 s), stability (8.6 ± 2.9 μV/s), selectivity and no water layer), whilst imparting an excellent antifouling effect with an antibacterial rate of 98.1% when the content of PAMTB in the ISM was 2.5 wt%. Further, GC/PANI-PFOA/Pb²⁺-PISM maintained stable antifouling properties, excellent potential response, and stability even after soaking in a high-concentration bacterial suspension for 7 days.

A novel slag composite for the adsorption of heavy metals: Preparation, characterization and mechanisms

The utilization of solid waste for resource recovery and production of value-added products is the theme of green chemistry. Currently, how to using solid wastes to prepare environmentally-functional materials with high performance and strength is one of the hot topics. In this research, electrolytic manganese residue (EMR) was thermally activated with calcite to prepare a silicon-based functionalized adsorbent (C-EMR) for the removal of cadmium (Cd²⁺, 467.14 mg/g) and lead (Pb²⁺, 972 mg/g). The thermodynamic results indicated that the removal process of Cd²⁺ and Pb²⁺ by C-EMR were endothermic and spontaneous. HNO₃ can effectively strip the two adsorbed metals from C-EMR with the stripping efficiency of nearly 80% for Cd²⁺ and 99.92% for Pb²⁺, indicating that adsorption and ion exchange may be the main reason for the removal of the metals on C-EMR. Besides, surface precipitation was also responsible for removing some Pb²⁺ from the aquatic environment according to the X-ray photoelectron spectrometry (XPS) analysis. Results indicate that -SiO₃^- has stronger affinity with Pb²⁺ and Cd²⁺ than other groups ((-MnO₂), -OH) by theoretical calculation (VASP, GGA-PBE). This study shows that this novel adsorbent (C-EMR) can be adopted as an environmentally-friendly, inexpensive and efficient adsorbent for removal of Cd²⁺ and Pb²⁺ from aquatic solution. This technique not only provides potential adsorbent for the elimination of heavy metals but also proposes an alternative route for the treatment and utilization of waste solid.

Preparation of ethylenediamine-modified pectin/alginate/Fe(3)O(4) microsphere and its efficient Pb(2+) adsorption properties

As a common macromolecular carbohydrate, pectin has a strong affinity for Pb²⁺. An ethylenediamine modified pectin (EP₄₈) with 48 % of amidation was prepared and exhibited great removal efficiency towards Pb²⁺ in our previous study. However, the EP₄₈ has drawbacks in adsorption including low mechanical strength and difficulty in separation. In this study, EP₄₈ was compounded with sodium alginate (Alg) and Fe₃O₄ to synthesize EP₄₈/Alg/Fe₃O₄ microsphere. The physicochemical properties and Pb²⁺ adsorption characteristics of microsphere were analyzed. It was found that the microsphere exhibited good thermal stability, mechanical strength, porous structure, as well as acid tolerance. The pseudo-second-order model well described the kinetics of adsorption process, indicating the chemical adsorption is dominant. The Langmuir model fitted the experimental data well, and the maximum adsorption capacity reached 175.19 mg/g. Adsorption-desorption experiments showed that the removal rate of the microsphere maintained over 98.9 % after 10 cycles. The X-ray photoelectron spectroscopy (XPS) analyses revealed that the potential adsorption mechanism included ion-exchange and chelation. The above results suggested its potential use for the removal of Pb²⁺ from wastewater.

Roles of polystyrene micro/nano-plastics as carriers on the toxicity of Pb2+ to Chlamydomonas reinhardtii

Little information could be consulted on the impacts of micro-plastics as carriers on toxicity of heavy metals, especially for micro-plastics of different sizes. Therefore, this study investigated the adsorption and desorption of Pb²⁺ on polystyrene plastics with nano- and micro-size (NPs and MPs), and further evaluated the roles of NPs and MPs as carriers on the toxicity of Pb²⁺ to Chlamydomonas reinhardtii (C. reinhardtii). The results showed that NPs showed higher adsorption capacities and a lower desorption rate for Pb²⁺ than MPs. The growth inhibitory rates (IR) of mixed and loaded Pb²⁺ with MPs to C. reinhardtii were 18.29% and 15.76%, respectively, which were lower than that of Pb²⁺ (22.28%). The presence of MPs decreased the bioavailability of Pb²⁺ to C. reinhardtii by a competitive adsorption for Pb²⁺ between MPs and algal cells, and suppressed membrane damage and oxidative stress caused by Pb²⁺. Maximum IR was observed for the mixture of NPs with Pb²⁺ (35.64%), followed by Pb²⁺ loaded on NPs (30.13%), single NPs (26.71%) and Pb²⁺ (21.01%). The internalization of NPs with absorbed Pb²⁺ intensified lipid peroxidation. The mixed and loaded microplastics with Pb²⁺ had more negative effects on C. reinhardtii than the single microplastics. The size-dependent effect was observed in the capacity of heavy metal ions carried by microplastics and the roles of microplastics as carriers on the toxicity of Pb²⁺. The results showed that the indirect risk of microplastics as 'carriers' could not be ignored, especially for NPs.

Ultra-trace levels voltammetric determination of Pb2+ in the presence of Bi3+ at food samples by a Fe3O4@Schiff base Network1 modified glassy carbon electrode

In this research, a highly sensitive electrochemical sensor was developed for the square wave anodic stripping voltammetric determination of Pb²⁺ at ultra-trace levels. A Glassy carbon electrode was modified with an in-situ electroplated bismuth film and the nanocomposite of a recently synthesized melamine based covalent organic framework (schiff base network₁ (SNW₁)) and Fe₃O₄ nanoparticles (Fe₃O₄@SNW₁). The obtained results exhibit clearly that combination of Fe₃O₄@SNW₁ and in-situ electroplated bismuth film enhances the sensitivity of the modified electrode towards Pb²⁺ remarkably. A Plackett-Burman design was implemented for screening experimental factors to specify the significant variables influencing the sensitivity of the electroanalytical method. Afterward, the effective factors were optimized using Box-Behnken design (BBD). Under optimized conditions, the proposed electrode showed a linear response towards Pb²⁺ in the concentration range of 0.003-0.3 μmol L^-1 with the detection limit of 0.95 nmol L^-1. The selectivity of the fabricated electrode towards different ionic species were checked out and no serious interference was observed. At the end, the application of the designed sensor in the determination of Pb²⁺ at 10 different edible specimens were investigated and the obtained recovery values were in the range of (95.56-106.64%) indicating the successful performance of the designed sensor.

A biomass-derived Schiff base material composited with polylactic acid nanofiber membrane as selective fluorescent 'turn off/on' platform for Pb2+ quantitative detection and characterization

Herein, a biomass-derived compound Z1 is synthesized via 'one pot' method for detection Pb²⁺ using fluorescence and visual dual-mode in aqueous solution. Z1 shows good response to Pb²⁺ with a limit of detection (LOD) of 13.4 nM. Importantly, the coordination mode of Z1 with Pb²⁺ is further evaluated by UV-vis and NMR spectroscopy and a 1:1 stoichiometry is identified. Furthermore, Z1 can be applied to detection Pb²⁺ in practical samples with satisfactory recoveries in range of 96.0 %-112.0 % in real samples. Besides, Z1 is added into polylactic acid (PLA) solution and made as portable fluorescence nanofiber membrane for Pb²⁺ detection. Further, Z1 responds to Pb²⁺ with high selectivity and sensitivity and has been applied for tracking Pb²⁺ changes in soil samples, zebrafish, and plant tissues. These results indicated that Z1 had great application potential in accurate detection Pb²⁺.

Oyster (Crassostrea gigas) ferritin can efficiently reduce the damage of Pb2+in vivo by electrostatic attraction

Heavy metal ions pollution can cause damage to human body through food, so the development of a new kind of macromolecular that can remove heavy metal ions damage has a good application prospect. The possibilities of removing heavy metal ions from food system with ferritin were studied in this paper. In this study, oyster ferritin (GF1) can resistant to denaturation induced by Pb²⁺, Cd²⁺, Cr³⁺ and still maintains its basic structure. GF1 can bind more Pb²⁺, Cd²⁺, Cr³⁺ than recombinant human H-chain ferritin (rHuHF), especially Pb²⁺, and the findings suggest that each GF1 can capture about 51.42 Pb²⁺ in solution. The hard and soft acids and base also verifies that Pb²⁺ have stronger binding ability to the key amino acids at the outer end of the three-fold symmetry channel. Cells preprotected by ferritin could resistant to heavy metal ions. And GF1 can reduce the high blood lead in mice and may play a role in alleviating lead poisoning in vivo. All findings demonstrated that GF1 can be used as a novel macromolecule to bind heavy metal ions, and the study can broaden the research scope of ferritin in contaminated food systems.

New insights on metal ions accelerating the aging behavior of polystyrene microplastics: Effects of different excess reactive oxygen species

Microplastics (MPs) will coexist with various pollutants in the environment, but it is not clear whether these pollutants will affect the aging process of MPs. The aging process of polystyrene microplastics (PS-MPs) mediated by Cu²⁺ and Pb²⁺ was investigated in this study. The results showed that the aging rate of PS-MPs mediated by Cu²⁺ and Pb²⁺ were significantly higher than that of ultrapure water (After 7 days of light irradiation, the CI values of aging PS-MPs mediated by ultrapure water, Cu²⁺ and Pb²⁺ increased from 0.030 of original PS-MPs to 0.034, 0.048 and 0.086 respectively). This process may be related to the generation of a large amount of reactive oxygen species, because OH were detected in PS-MPs suspension mediated by Cu²⁺, which were significantly higher than those in ultrapure water, while ¹O₂ mediated by Pb²⁺ were more. However, these photo-aging effects were significantly inhibited by reactive oxygen species (ROS) quencher, which indicated that excessive ROS production was the main reason for metal ions to promote the photo-aging of PS-MPs. In addition, this study reported that excessive ROS will accelerate the formation of carbonyl group on the surface of PS-MPs, and lead to the change of physical and chemical properties of PS-MPs. This study provides new insights for the environmental behavior of MPs under the condition of combined pollution.

In situ growth of ZIF-8 on carboxymethyl chitosan beads for improved adsorption of lead ion from aqueous solutions

In this study, a method for the in situ growth of zeolitic imidazolate framework-8 (ZIF-8) on carboxymethyl chitosan beads (BCMC) to produce a composite adsorbent (BCMC@ZIF-8) for the removal of Pb²⁺ from water is proposed. The results revealed that the utilization of the BCMC as a framework enhanced the stability of ZIF-8, and the presence of the latter in the composite improved the removal efficiency of Pb²⁺ from water. Data from X-ray photoelectron spectroscopy analysis and adsorption kinetics revealed that the adsorption mechanism included diffusion and the sharing/transfer of electrons between BCMC@ZIF-8 and Pb²⁺. The maximum adsorption capacity of BCMC@ZIF-8 fitted using the Langmuir model was 566.09 mg/g. Results of the experiments on the regeneration of the adsorbent and its stability in water further indicated that BCMC improved the stability of ZIF-8. This study demonstrated that the stability of metal-organic framework (MOF) materials, which exhibited high efficiencies for the removal of heavy metals in water can be improved through fixation of the polymer skeleton. Thus, the present study offers practical and theoretical guidance for the application of MOF materials in water treatment.

A rotary multi-positioned cloth/paper hybrid microfluidic device for simultaneous fluorescence sensing of mercury and lead ions by using ion imprinted technologies

A novel rotary cloth/paper hybrid microfluidic analytical device (μCPAD) was proposed via the synergy of the fluorescence sensing cloth-based component and rotary paper-based microfluidic analytical device (μPAD) for simultaneous detection of mercury (Hg²⁺) and lead (Pb²⁺) ions. Fluorescence sensing cloth-based component was prepared by grafting quantum dots onto cotton cloth and then modifying with ion imprinted polymers (IIP). Because the cloth has good ductility and durability, it can bear strong oscillation during the fabrication of grafting quantum dots and IIP, and brings a lot of convenience to the production process. At the same time, because rotary μCPAD was stacked by three-layer papers with designed hydrophilic channels and hydrophobic barriers, it could realize simultaneous detection of Hg²⁺ and Pb²⁺ ions by rotating top layer counterclockwise or clockwise. The fluorescence signals were obtained through quantum dots' electron transfer fluorescence quenching effect with the limits of detection were 0.18 and 0.07 μg/L, respectively. This method successfully realized the transference of specific and sensitive fluorescence sensing materials (quantum dots) onto the microfluidic device to improve the portability and expanded applications. Moreover, the novel microfluidic device may have great potential in point-of-care testing of heavy metal ions in environmental monitoring fields.

Mechanistic study for mutual interactions of Pb2+ and Trichoderma viride

Fungi play significant roles in the geochemical processes of heavy metals in the environment. However, the interaction between heavy metals and fungi, especially at the cellular level, is quite complicated and remains unknown. This study explored the mutual interaction mechanism between Pb²⁺ and Trichoderma viride by combining batch experiments, spectroscopy, and in vitro approaches. Batch experiments revealed that Pb²⁺ had toxic effect on T. viride, originally causing the biomass of T. viride decreased from 1.3 g in the control group to 0 g in the presence of 200 mg/L Pb²⁺. The difference in biomass further led to varied pH, even decreasing from 5.7 at the outset to 3.4 due to the acid-production properties of T. viride. Moreover, structural deformation and damage of T. viride mycelium appeared when exposed to Pb²⁺, and were more evident at a higher dose of Pb²⁺ exposure. The growth curve exhibited that T. viride gradually adapted to Pb²⁺ exposure, which related to Pb²⁺ exposure concentration. Further, intracellular and extracellular secretions of T. viride changed with varying exposure concentrations of Pb²⁺, indicating that T. viride adapted differently to different concentrations of Pb²⁺, and MT participated in the detoxification of T. viride. SEM-EDX showed that T. viride could bio-adsorb and bioaccumulate more Pb²⁺ when exposed to more Pb²⁺, which was closely related to the content of P. And carbonyl, phosphate, and amino groups of T. viride participated in the Pb²⁺ biosorption onto T. viride, as evidenced by FT-IR and XPS. Meanwhile, the biomineralization and reduction of Pb²⁺ by T. viride were observed by XRD and XPS, which might be a possible factor for Pb²⁺ biosorption and bioaccumulation. CLSM showed that the bio-adsorbed and bioaccumulated Pb²⁺ were mainly distributed in the membrane of T. viride mycelium.

Impact of microplastics on bioaccumulation of heavy metals in rape (Brassica napus L.)

Microplastics have become a global environmental problem due to the ubiquitous existence. The impacts of microplastics on heavy metals behaviors in aquatic environment are widely investigated, however, the impacts of microplastics on bioaccumulation of heavy metals in vegetables in terrestrial environment are seldom investigated. Herein, batch experiments were carried out, the microplastics (0.001%, 0.01%, 0.1%) and heavy metal (50, 100 mg/kg Cu²⁺ or 25, 50 mg/kg Pb²⁺) were single or combined spiked into soil to cultivate rapes (Brassica napus L.) in greenhouse. Copper and lead contents of rapes in MP0.1+Cu100 and MP0.1+Pb50 treatments reached 38.9 mg/kg and 9.4 mg/kg, which were significantly (p < 0.05) higher than those of Cu100 (35.3 mg/kg) and Pb50 (8.7 mg/kg) treatments, respectively. Results showed that microplastics in soil would facilitate heavy metals entering rape plants. In addition, contents of total chlorophyll, soluble sugar, vitamin C, malondialdehyde contents, activities of superoxide dismutase and guaiacol peroxidase, as well as related gene expression were analyzed to investigate the toxic effects of these pollutants (microplastics, Cu, and Pb) to rape plants. Malondialdehyde contents of rapes in MP0.1+Cu50, MP0.1+Cu100, MP0.1+Pb25, and MP0.1+Pb50 treatments reached 0.102 mmol/mg Protein, 0.123 mmol/mg Protein, 0.101 mmol/mg Protein, and 0.119 mmol/mg Protein, which were 1.42, 1.37, 1.46, and 1.45 times of those in Cu50, Cu100, Pb25, and Pb50 treatments, respectively. The changes of malondialdehyde content, activities of superoxide dismutase and guaiacol peroxidase, as well as contents of sugar and vitamin C indicated that microplastics in soil would bring severer damage and deteriorate quality of rape plants. The data in this study indicated that microplastics would increase the bioaccumulation of heavy metals in vegetables and damage to vegetables.

A simple and rapid fluorescent approach for Pb2+ determination and application in water samples and living cells

A novel selective fluorescent chemosensor, thiosemicarbazide-appended naphthalimide derivative (TND), has been designed and synthesized, which exhibited good selectivity and sensibility for Pb²⁺ in CH₃CN:H₂O (1:1) solution. The probe TND showed obvious color changes under UV light of 365 nm and displayed turn-on fluorescence response with Pb²⁺ added. The binding mode of TND with Pb²⁺ was found to be 1:1 based on the Job's plot analysis. The detection limit of Pb²⁺ was 4.7 nM, which is far below the allowable concentration determined by WHO in drinking water. Moreover, the fortified recoveries of Pb²⁺ were from 100.54% to 113.68% in water samples. TND is also applied for fluorescence imaging of Pb²⁺ in lysosomes of human stromal cell line (HSC). This study indicated that TND would be a potential sensor detecting Pb²⁺ in real sample.

Peptide-based system for sensing Pb2+ and molecular logic computing

Peptides with recognition, assembly, various activities exhibit strong power and application prospects in sensing, material science, biomedicine. However, peptide-based sensing and expanding application is still at an early stage. Herein, a peptide-based sensing and logic system was developed for highly sensitive and selective detection of Pb²⁺ and implementation of logic operations. Our Pb²⁺ assay method was ultra-rapid (less than 1 min), direct, simple with detection limit of 0.75 nM. Flexibility and scalability of peptide-based solution system facilitated the execution of sensing and logic operations from simple to complex. This research will not only inspire discovery and comprehensive applications (such as sensing and assembly) of more functional peptides, but also provide more opportunities for development and design of peptide-based systems and molecular information technologies.

A key role of inner-cation-π interaction in adsorption of Pb(II) on carbon nanotubes: Experimental and DFT studies

Herein the adsorption and desorption of Pb²⁺ on oxidized (O-CNTs) and graphitized multi-walled carbon nanotubes (G-CNTs) were studied, and detailed adsorption mechanisms were discussed by experimental characterization and density functional theory (DFT) calculation. The adsorption of Pb²⁺ on CNTs was co-guided by complexation, ion exchange, electrostatic and cation-π interactions. According to the abnormally low release ratio of Pb²⁺ on both O-CNTs and G-CNTs (<9.03%), the O-containing groups on CNTs surface are not the only key factor affecting the adsorption behavior. The pore filling and complexation are the main mechanisms leading to irreversible adsorption, especially the important role of the inner-cation-π interaction in Pb²⁺ adsorption into the inner channel of CNTs at the high initial Pb²⁺ concentration, and DFT calculations further confirmed this result. The adsorption energy of the inner-cation-π interaction between Pb²⁺ and CNTs can be as high as - 77.851 kJ/mol, which is much higher than other interactions (≤-41.488 kJ/mol). Moreover, the stability of various adsorption mechanisms by HOMO-LUMO energy gap (E_gap), electronic chemical potential (µ) and global hardness (η) were quantitatively measured and further revealed the inner-cation-π interaction is more stable. This study provides a deeper understanding of the removal of heavy metals by porous carbon-based nanomaterials.

A regenerable ion-imprinted magnetic biocomposite for selective adsorption and detection of Pb2+ in aqueous solution

A regenerable ion-imprinted magnetic biocomposite (IIMB) was successfully synthesized for simultaneous removal of Pb²⁺ using Serratia marcescens and carboxymethyl chitosan (CMC) as functional carriers, Pb²⁺ was utilized as the imprinted ion, while Fe₃O₄ served as the magnetic component. The structure and properties of IIMB were characterized by various techniques. The adsorption kinetics, isotherms and thermodynamics were applied to interpret the Pb²⁺ adsorption process on IIMB. The results showed the IIMB possessed prominent uptake ability toward Pb²⁺. The pseudo-second-order kinetic (R² = 0.9989) and Langmuir models (R² = 0.9555) fitted the data well. Adsorption thermodynamics revealed that the adsorption was a spontaneous endothermic reaction. The possible adsorption mechanisms involved physical adsorption, electrostatic attraction and complexing. Moreover, because Pb²⁺ can be specifically and strongly adsorbed on IIMB, a simple method for detection of Pb²⁺ was established by coupling IIMB with flame atomic absorption spectrometry (IIMB-FAAS). The developed IIMB-FAAS assay can sensitively detect Pb²⁺ with a linear range from 5.0 to 500.0 μg/L. The detection limit (LOD) of 0.95 μg/L as well as a quantification limit (LOQ) of 3.20 μg/L were obtained. This work proved that the IIMB could selective and efficient adsorb Pb²⁺, which provided some insights into wastewater treatment, water quality inspection and environmental remediation.

Sonochemical synthesis of ZnS nanolayers on the surface of microbial cells and their application in the removal of heavy metals

In order to improve the adsorption performance of microorganisms, we synthesized a novel material - phanerochaete chrysosporium cells covered with a layer of ZnS nanoparticles (ZnS-cells). The preparation of the ZnS-cells is based on the Sonochemical method to synthesize the ZnS nanoparticle layer on the surface of the microbial cells. The ZnS-cells were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR). Characterization results showed that wurtzite ZnS was coated on the cell surface in the form of nanoclusters by sonochemical reaction, and the formation of ZnS was related to the carboxyl group on the cell surface. Batch experiments showed that the ZnS-cells exhibited high adsorption efficiency for Pb²⁺and Cd²⁺, the removal rate of Pb²⁺ and Cd²⁺ by ZnS-cells was 140 % and 160 % higher than that of pure P. chrysosporium, respectively. Studies on the adsorption mechanism showed that the removal of heavy metals by ZnS-cells mainly depended on the complexation of surface functional groups on the surface of the cells and the ion exchange of ZnS nanofilms.

Adsorption characteristics of Barmer bentonite for hazardous waste containment application

Low hydraulic conductivity and high chemical immobilization are the two characteristics that make bentonite a mandatory construction material for hazardous waste containment applications. We performed a comprehensive batch sorption study on Barmer bentonite (BB), an exclusive construction clay mined in India, using lead (Pb²⁺) as a model contaminant. The maximum adsorption capacity of BB was obtained as 55 mg g^-1 at pH 5 and 27 ± 2℃. Adsorption was extremely rapid, with equilibrium attained <5 min for the BB. Increased adsorbent dosage resulted in higher Pb²⁺ percentage removal, while adsorption capacity decreased. Ionic strength, salt concentration, valency and ionic radius played a critical role in suppressing the adsorption of Pb²⁺. Clay fabric change was observed to be dispersed at low ionic strength and gradually attained aggregated face-to-face structures at high ionic strength. The simultaneous presence of other metals/salts strongly influenced Pb²⁺ removal by BB, while divalent salt exhibited high suppression of adsorptive reaction at low concentrations. Sorption isotherm and kinetic modeling results indicated the possibility of chemisorption of Pb²⁺ on BB. Based on the thermodynamic analysis, it was noted that Pb²⁺ adsorption on BB is exothermic, spontaneous and adsorption reaction is less favorable at a higher temperature.

Sensitive colorimetric detection of Pb2+ by geometric field amplification and surface plasmon resonance visualization

Pb²⁺ is one of the major environmental pollutants, which can be visually detected by surface plasmon resonance of nanoparticles. Paper based analytical device, as a newly developed microfluidic detection platform, is featured in cost-effective and suitable for on-site analysis. In this paper, a sensitive and portable detection method for Pb²⁺ was proposed, in which Pb²⁺ was electrokinetically stacked on the paper fluidic channel by geometric field amplification effect and visualized online by glutathione-modified silver nanoparticles. Colorimetric quantification of the visualized stacking band was conducted by smart phone camera. To avoid unfavorable influence from pH change on the surface plasmon resonance visualization, field amplification effect was introduced by geometric design of the paper fluidic channel. The enriched Pb²⁺ was clearly visible on the paper substrate, and the stacking band intensity was about four orders of magnitude enhanced, comparing to the intensity without stacking. A linear response to Pb²⁺ was observed in the range of 0.3-7.0 μM (R² = 0.997) with a limit of detection of 86 nM and a limit of quantity of 0.28 μM. The established method was used in the detection of Pb²⁺ from river and lake water samples, and the results were confirmed by atomic absorption spectroscopy method.

Comparative study on Pb2+ removal from aqueous solutions using biochars derived from cow manure and its vermicompost

Waste emissions have increased the amount of water and soil contaminated with heavy metals such as Pb. To broaden the methods for the recycling and environmental usage of cow manure (CM) and its vermicompost (CV), CM, CV, and their derived biochars produced by the pyrolysis of CM or CV at 350 and 700 °C were used as adsorbents for Pb²⁺ removal in this batch adsorption experiment to reveal their different Pb²⁺ removal efficiencies and the underlying mechanisms. The batch experiment results revealed that all adsorbents rapidly removed Pb²⁺ within 30 min. A pH between 2.0 and 6.0 positively affected Pb²⁺ removal by CM and its biochar, whereas that by CV and its biochar was only positively affected by pH between 2.0 and 3.0. CV-derived biochar was more effective in the removal of Pb²⁺ than the other absorbents, with the maximum adsorption capacities (Qm) fitted from the Langmuir model reaching approximately 230.0 mg·g^-1 and the desorption rate (DR) being approximately 0.00-0.02%. Material physiochemical characterization, including X-ray diffraction analysis, showed that high pH, high ash content, rich mineral content, and high mineral contents might have been the main reasons for more effective removal of Pb²⁺ from aqueous solutions by CV-derived biochar. Fourier-transform infrared analysis indicated that surface functional groups such as -OH, CO, -COO-, and C-O; original and newly produced carbonate; and phosphate in CV also led to more effective Pb²⁺ removal efficiency from aqueous solution via surface functional group binding. Thus, pyrolyzing CVs may be used to produce biochar as a cost-effective adsorbent for heavy metal remediation in soil and water in the future.

Ratiometric fluorescent nanoprobes based on Resonance Rayleigh Scattering and inner filter effect for detecting alizarin red and Pb2

A new ratiometric fluorescent strategy for detection of alizarin red (ARS) was designed based on the fluorescence of CDs and scattered light of scatterer. The CDs-ARS system can be used to detect Pb²⁺ based on that the complexation between ARS and Pb²⁺. With the addition of ARS, the fluorescence of CDs was apparently quenched via inner filter effect (IFE). Resonance Rayleigh Scattering (RRS) at 350 nm was enhanced by an increase in the number of scatterer. The value of ln(I₃₅₀/I₄₂₅) was linearly correlated with ARS concentration in the range of 0-80 μM, and the detection limit for ARS was calculated to be 68.1 nM. When Pb²⁺ was added to the CDs-ARS system, the complexation of ARS with Pb²⁺ increased the size of the scatterer, resulting in the increase of the RRS intensity at 350 nm. Due to the affinity between ARS and Pb²⁺, the overlap of the emission spectra of CDs and the absorption spectra of ARS was reduced, resulting in the IFE effect was inhibited and the recovery of the fluorescence of CDs. The value of I₃₅₀/I₄₂₅ linearly increased with the addition of Pb²⁺ within the range of 10-50 μM, the limit of detection was 36.8 nM. As for practical application, CDs and CDs-ARS were applied to detect ARS and Pb²⁺ in tap water and poor water, respectively. The recovery values were obtained to be 95.4-98.8% and 93.4-101.7%. Furthermore, the system of CDs-ARS has been successfully applied to H1299 cell imaging.

Long term effects of Pb2+ on the membrane fouling in a hydrolytic-anoxic-oxic-membrane bioreactor treating synthetic electroplating wastewater

Long-term effects of Pb²⁺ on the operating performance and membrane fouling of two hydrolytic-anoxic-oxic-membrane bioreactors treating synthetic electroplating wastewater were investigated. The COD, NH₄⁺-N and TN removal efficiencies decreased by 5.5%, 10.4% and 7.9% with long-term exposure of 2 mg L^-1 Pb²⁺, while serious decreases achieved 25.4%, 35.0% and 26.2% with 6 mg L^-1 Pb²⁺ exposure, respectively. 2 mg L^-1 Pb²⁺ mitigated the cake layer fouling rate by 25.4% but increased the pore blocking rate by 69.1%, which was contributed by the increase of low and moderate molecular weight (MW) components in the soluble and colloidal foulants (SCFs). 6 mg L^-1 Pb²⁺ accelerated the cake layer fouling rate by 101.1%, but mitigated the pore blocking rate by 6.4% due to the increase of high MW SCFs (especially polysaccharides). Thermodynamic analyses showed that Pb²⁺ regulated the concentration and protein/polysaccharide ratio of loosely bound extracellular polymeric substances, thus changing the flocs hydrophobicity and aggregation capacity, leading the cake layer fouling rate variation.

Aggregation-induced emission of copper nanoclusters triggered by synergistic effect of dual metal ions and the application in the detection of H2O2 and related biomolecules

Recently, the aggregation-induced emission (AIE) of nanoclusters triggered by metal ions has been received great attentions. However, the good AIE efficiency usually requires excessive metal ions, which may result in an undesired competition between metal ions and targets. In this work, by the synergistic effect of Pb²⁺ and Zr⁴⁺, a fewer amounts of metal ions can induce more aggregates of glutathione-capped Cu nanoclusters (CSH-CuNCs), resulting in a higher AIE efficiency. Next, by virtue of the oxidative property of H₂O₂, the AIE of GSH-CuNCs-Pb²⁺-Zr⁴⁺ system quenches linearly with the concentration of H₂O₂ from 1 to 60 μmol/L. Moreover, many biological substrates, such as glucose and cholesterol, can generate H₂O₂ in the presence of their specific oxidases and O₂. Therefore, the detection of glucose or cholesterol can also be achieved by the proposed method, and the limits of detection of glucose and cholesterol are 0.37 and 2.7 μmol/L, respectively. Finally, this method has been validated to be sensitive and selective for glucose or cholesterol detection in human serum samples.

Label-free potentiometric aptasensing platform for the detection of Pb2+ based on guanine quadruplex structure

Potentiometric aptasensors enhanced by integrating advanced nanomaterials are of particular interest for the detection of multiplex species (e.g., proteins, bacteria, micro-organisms) due to their low cost, ease of operation, and low detection limits. However, potentiometric detection of small ionic species aptasensors is still challenging. This article describes the first example of a label-free G-quadruplex-based potentiometric aptasensing platform for the detection of Pb²⁺. Polyion oligonucleotide-labeled gold nanoparticles (AuNPs-DNA) as probes are modified on Au electrode, providing high-density negative charge on the electrode surface. These signal-amplifying probes can selectively form G-quadruplexes with the presence of Pb²⁺ ions and reduce the negative charges on the electrode surface, hence achieving potentiometric detection of Pb²⁺ ions with high selectivity. The AuNPs-DNA-based aptasensor shows an acceptable sensitivity over a wide range from 10^-11 to 10^-6 M with a detection limit of 8.5 pM. Furthermore, confirmed by coupled plasma mass spectrometry, the sensing platform is capable of performing effective and accurate detection of Pb²⁺ level in real water samples. The presented aptasensor offers a fast, convenient, low-maintenance, and highly sensitive alternative for on-site water pollution detections.

Encapsulated green magnetic nanoparticles for the removal of toxic Pb2+ and Cd2+ from water: Development, characterization and application

Current research is based on an innovative approach of the fabrication of encapsulated sustainable, green, phytogenic magnetic nanoparticles (PMNPs), to inhibit the generation of secondary pollutants (Iron/Fe^o) during water treatment applications. These novel bio-magnetic membrane capsules (BMMCs) were prepared using two-step titration gel crosslink method, with polyvinyl alcohol and sodium alginate matrix as the model encapsulating materials to eliminate potentially toxic metals (Pb²⁺ and Cd²⁺) from water. The development of BMMCs was characterized by FTIR, XRD, XPS, SEM, VSM, TGA and EDX techniques. The effects of various operating parameters, adsorbent dose, contact time, solution pH, temperature, initial concentration of metals cations and co-existing ions were studied. The hysteresis loops have illustrated an excellent super-paramagnetic nature, demonstrating the smooth encapsulation of PMNPs without losing their magnetic properties. The maximum monolayer adsorptive capacities estimated at pH 6.5 by the Langmuir isotherm model were 548 and 610.67 mg/g for Pb²⁺ and Cd²⁺, respectively. The novel BMMCs did not only control oxidation of PMNPs but also sustained the adsorptive removal over a wide range of pH (3-8), and the electrostatic interaction and ion-exchange were the core adsorption mechanisms. The BMMCs could easily be regenerated using 25% HNO₃ as an eluent for successful usage in seven repeated cycles. Therefore, the BMMCs as a material can be used as an excellent sorbent or composite material to remove toxic metals Pb²⁺ and Cd²⁺, showing strong potential for improving water and wastewater treatment technologies.

Co-transport of graphene oxide and heavy metal ions in surface-modified porous media

The ability to predict the transport of heavy metal ions in porous media with different surface characteristics is crucial to protect groundwater quality and public health. In this study, the effects of graphene oxide (GO) on co-transport and remobilization of Pb²⁺ and Cd²⁺ in humic acid (HA), smectite, kaolinite, and ferrihydrite-coated sand media were evaluated via laboratory packed-column experiments. Scanning electron microscope and energy dispersive X-ray analysis showed that the surface morphology of the coated sands was quite different and that ∼56.7-89.9% of the surface was covered by the coating and the major elemental components were C, O, Si, Al, and Fe. GO exhibited high mobility in HA, kaolinite, and smectite-coated sand, but showed high retention in ferrihydrite-coated sand. While GO reduced the transport of Pb²⁺ and Cd²⁺, both metal ions also reduced the mobility of GO in coated-sand columns. Elution experiments revealed that GO led to the remobilization and release of the previously sorbed Pb²⁺ and Cd²⁺ from the coated sand. However, GO could not release Pb²⁺ and Cd²⁺ from smectite-coated sand columns, probably because smectite has stronger adsorption affinity to the heavy metals than GO. Derjaguin-Landau-Verwey-Overbeek calculations were employed and explained the GO transport behavior in the columns well. Furthermore, the advection-dispersion-reaction equation simulated the cotransport of Pb²⁺ and Cd²⁺ with GO in the coated sand well. These results are expected to provide insight into the potential impact of coexisting nanomaterials with contaminants in vulnerable soil and groundwater systems.

β-cyclodextrin functionalized biochars as novel sorbents for high-performance of Pb2+ removal

The aim of this study was to synthesize the functionalized biochars with β-cyclodextrin (β-CD), compare the two kinds of adsorption capability, and try to explore the possible mechanism for the adsorption Pb²⁺ by β-CD functionalized rice straw and palm biochars in the aquatic environment. The performance of the functionalized biochars was matched against the activated and raw biochars. Rice straw biochar loaded with β-CD performed better than functionalized palm biochar with the adsorption capabilities of 130.60 mg/g and 90.30 mg/g at Pb²⁺ concentration of 3000 mg/L and 2000 mg/L, respectively. Maximum adsorption capability of functionalized rice straw and palm biochars from the Langmuir isotherms were all fitted out to be 131.24 mg/g and 118.08 mg/g for Pb²⁺. Kinetics and thermodynamics are combined to investigate the Pb²⁺ removal by the two functionalized biochars, e.g, Pb²⁺ is mainly removed by chemical process for functionalized palm biochar, whereas by both physical and chemical factors for functionalized rice straw biochar.

Insights into the simultaneous removal of Cr6+ and Pb2+ by a novel sewage sludge-derived biochar immobilized nanoscale zero valent iron: Coexistence effect and mechanism

Cr⁶⁺ and Pb²⁺ are both highly toxic pollutants and commonly co-exist in some industrial effluents and contaminated waters. In this study, simultaneous removal of Cr⁶⁺ and Pb²⁺ by a novel sewage sludge-derived biochar immobilized nanoscale zero-valent iron (SSB-nZVI) was systematically investigated. It was well demonstrated that a porous structure was successfully formed on the SSB-nZVI when the starch was used as an additive. A synergistic effect on the adsorption and reduction over the SSB-nZVI was achieved, resulting in nearly 90 and 82% of Cr⁶⁺ and Pb²⁺ removal within 30 min, respectively. Cr⁶⁺ was reduced prior to Pb²⁺. A low pH could accelerate the corrosion of nZVI as well as phosphate leaching. When Malachite green was added as a coexisting organic pollutant, its effective removal was found due to the formation of a Fenton-like system. The SSB-nZVI could be run consecutively three times with a relatively satisfactory performance. Most of Cr⁶⁺ was converted into Cr₂O₃ and Cr(OH)₃ on the SSB-nZVI surface, whereas most of Pb²⁺ species existed as Pb(OH)₂ (or PbO). A possible reaction mechanism on the SSB-nZVI involved the adsorption, reduction and precipitation of both Cr⁶⁺ and Pb²⁺ over the particles. Present study sheds light on the insight of the fate and transport of Cr⁶⁺ and Pb²⁺ in aquatic environment, as well provides helpful guide for the remediation of coexistence of pollutants in real applications.

A versatile cathodic "signal-on" photoelectrochemical platform based on a dual-signal amplification strategy

Novel cathodic photoelectrochemical (PEC) aptasensors for sensitive and selective determination of thrombin and Pb²⁺ were developed based on a new dual-signal amplification strategy. The presence of gold nanoparticles (AuNPs) could quench the PEC signal of bismuth oxyiodide (BiOI). At the same time, the redox moiety G-quadruplex/hemin or ferrocene (Fc) was found to enhance the PEC signal of BiOI. So, in the presence of thrombin or Pb²⁺, the interaction between target and the aptamer resulted in the releasement of the AuNPs, as well as shorter distance between the redox moiety and the electrode surface. Hence dual-enhanced cathodic PEC biosensor strategy was realized. Under the optimized conditions, the detection limits of thrombin and Pb²⁺ were 17.3 fM and 3.16 pM, respectively with good selectivity. At the same time, the PEC performance of redox moiety G-quadruplex/hemin and Fc was compared.

Study on adsorption properties and mechanism of Pb2+ with different carbon based adsorbents

Different activated carbon materials are prepared from a series of solid wastes (sawdust, acrylic fabric, tire powder and rice husk) by combination of the KOH activation method and steam activation method. The influences of several parameters such as pH, contact time, adsorbent dosage and temperature on adsorption performance of Pb²⁺ with those different carbon adsorbents are investigated. The results demonstrate that C_{rice husk} performance well in the adsorption process. In the following, the C_{rice husk} is used to explain the adsorption mechanism of Pb²⁺ by SEM-EDS, FT-IR and XPS. The results illustrate that the surface oxygen-containing functional groups such as carboxyl, lactone group, phenolic hydroxyl and other alkaline metal ions like Na⁺ and K⁺ have significant effect on the adsorption process. A reasonable mechanism of Pb²⁺ adsorption is proposed that the ion exchange play key roles in the adsorption process. In addition, the effects of Cu²⁺, Zn²⁺ on the Pb²⁺ adsorption capacity with the four carbon adsorbents are also studied and the results demonstrate that other heavy metals play positive effects on the adsorption of Pb²⁺.

Highly sensitive and selective detection of Pb2+ using a turn-on fluorescent aptamer DNA silver nanoclusters sensor

A novel turn-on fluorescent biosensor has been constructed using C-PS2.M-DNA-templated silver nanoclusters (Ag NCs) with an average diameter of about 1 nm. The proposed approach presents a low-toxic, simple, sensitive, and selective detection for Pb²⁺. The fluorescence intensity of C-PS2.M-DNA-Ag NCs enhances significantly in the presence of Pb²⁺, which is attributed to the special interaction between Pb²⁺ and its aptamer DNA PS2.M. Pb²⁺ induces the aptamer to form G-quadruplex and makes two darkish DNA/Ag NCs located at the 3' and 5' terminus close, resulting in the fluorescence light-up. Moreover, Pb²⁺ can be detected as low as 3.0 nM within a good linear range from 5 to 50 nM (R = 0.9862). Furthermore, the application for detection of Pb²⁺ in real water samples further demonstrates the reliability of the sensor. Thus, this sensor system shows a potential application for monitoring Pb²⁺ in environmental samples.

Multistage optimizations of slow pyrolysis synthesis of biochar from palm oil sludge for adsorption of lead

This research investigated the removal of lead (Pb²⁺) by a novel biochar derived from palm oil sludge (POS-char) by slow pyrolysis. Multistage optimizations with central composite design were carried out to firstly optimize pyrolysis parameters to produce the best POS-char for Pb²⁺ removal and secondly to optimize adsorption conditions for the highest removal of Pb²⁺. The optimum pyrolysis parameters were nitrogen flowrateof30mLmin^-1, heating rateof10°Cmin^-1, temperatureof500°C and timeof30min. The optimum Pb²⁺ adsorption conditions were concentrationof200mgL^-1, timeof60min, dosageof0.3g and pH of 3.02. The various functional groups within POS-char played a vital role in Pb²⁺ uptake. Regeneration was demonstrated to be feasible using hydrochloric acid. Adsorption equilibrium was best described by Freundlich model. At low concentration range, adsorption kinetic obeyed pseudo-first-order model, but at high concentration range, it followed pseudo-second-order model. Overall, the results highlighted that POS-char is an effective adsorbent for Pb²⁺ removal.

A mechanism underlies fish GRP78 protection against Pb2+ toxicity

Heavy metal exposure impacts basic cellular processes and results in serious toxicological effects. Pb²⁺ can activate the response to endoplasmic reticulum (ER) stress by protein denaturation, changing intracellular calcium homeostasis, and inducing cell death. As an ER retention protein, 78-kDa glucose-regulated protein (GRP78) can relieve the Pb²⁺-induced ER stress and enhance cell viability. We previously showed that heavy metal ions such as Pb²⁺ etc. are harmful to fish cell lines in a time- and dose-dependent manner. The phenomenon is accompanied by the increasing accumulation of grass carp GRP78 (CiGRP78), which can protect the cells from heavy metal ion cytotoxicity. Here, we investigated the mechanism in which CiGRP78 exerted its protective function. Using metal ions affinity elution method and fluorescent spectral analysis, we showed that CiGRP78 could respectively form a complex with Calcium, Lead and Cadmium ions, especially with Lead ion in vitro. However, another ER retention protein CiGRP94 could not bind to Pb²⁺, highlighting the functional differentiation might exist in CiGRP78 and CiGRP94 in regulating heavy metal cytotoxicity. Our results suggested that CiGRP78 might increase cellular tolerance to Pb²⁺ via the direct interaction with it.