Encapsulated green magnetic nanoparticles for the removal of toxic Pb2+ and Cd2+ from water: Development, characterization and application

Integration of metal organic framework nanoparticles into sodium alginate biopolymer-based three-dimensional membrane capsules for the efficient removal of toxic metal cations from water and real sewage

Sodium alginate (SA) biopolymer has been recognized as an efficient adsorbent material owing to their unique characteristics, including biodegradability, non-toxic nature, and presence of abundant hydrophilic functional groups. Accordingly, in the current research work, UiO-66-OH and UiO-66-(OH)2 metal organic framework (MOF) nanoparticles (NPs) have been integrated into SA biopolymer-based three-dimensional (3-D) membrane capsules (MCs) via a simple and facile approach to remove toxic metal cations (Cu2+ and Cd2+) from water and real sewage. The newly configured capsules were characterized by FTIR, SEM, XRD, EDX and XPS analyses techniques. Exceptional sorption properties of the as-developed capsules were ensured by evaluation of the pertinent operational parameters, i.e., contents of MOF-NPs (1-100 wt%), adsorbent dosage (0.001-0.05 g), content time (0-360 h), pH (1-8), initial concentration of metal cations (5-1000 mg/L) and reaction temperature (298.15-333.15 K) on the eradication of Cu2+ and Cd2+ metal cations. It was found that hydrophilic functional groups (-OH and -COOH) have performed an imperative role in the smooth loading of MOF-NPs into 3-D membrane capsules via intra/inter-molecular hydrogen bonding and van der waals potencies. The maximum monolayer uptake capacities (as calculated by the Langmuir isotherm model) of Cd2+ and Cu2+ by 3-D SGMMCs-OH were 940 and 1150 mg/g, respectively, and by 3-D SGMMCs-(OH)2 were 1375 and 1575 mg/g, respectively, under optimum conditions. The as-developed capsules have demonstrated superior selectivity against targeted metal cations under designated pH and maintained >80 % removal efficiency up to six consecutive treatment cycles. Removal mechanisms of metal cations by the 3-D SGMMCs-OH/(OH)2 was proposed, and electrostatic interaction, ion-exchange, inner-sphere coordination bonds/interactions, and aromatic ligands exchange were observed to be the key removal mechanisms. Notably, FTIR and XPS analysis indicated that hydroxyl groups of Zr-OH and BDC-OH/(OH)2 aromatic linkers played vital roles in Cu2+ and Cd2+ adsorption by participating in inner-sphere coordination interactions and aromatic ligands exchange mechanisms. The as-prepared capsules indicated >70 % removal efficiency of Cu2+ from real electroplating wastewater in the manifestation of other competitive metal ions and pollutants under selected experimental conditions. Thus, it was observed that newly configured 3-D SGMMCs-OH/(OH)2 have offered a valuable discernment into the development of MOFs-based water decontamination 3-D capsules for industrial applications.

Electrochemical sensors modified with iron oxide nanoparticles/nanocomposites for voltammetric detection of Pb (II) in water: A review

Permissible limits of Pb2+ in drinking water are being reduced from 10 μgL-1 to 5 μgL-1, which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmental samples due to their ease of operation, low cost, and rapid detection responses. Selectivity, sensitivity and detection capabilities of these sensors, can be enhanced by modifying their working electrodes (WEs) with iron oxide nanoparticles (IONPs) and/or their composites. Therefore, this review is an in-depth analysis of the deployment of IONPs/nanocomposites in modification of electrochemical sensors for detection of Pb2+ in drinking water over the past decade. From the analyzed studies (n = 23), the optimal solution pH, deposition potential, and deposition time ranged between 3 and 5.6, -0.7 to -1.4 V vs Ag/AgCl, and 100-400 s, respectively. Majority of the studies employed square wave anodic stripping voltammetry (n = 16), in 0.1 M acetate buffer solution (n = 19) for detection of Pb2+. Limits of detection obtained (2.5 x 10-9 - 4.5 μg/L) were below the permissible levels which indicated good sensitivities of the modified electrodes. Despite the great performance of these modified electrodes, the primary source of IONPs has always been commercial iron-based salts in addition to the use of so many materials as modifying agents of these IONPs. This may limit reproducibility and sustainability of the WEs due to lengthy and costly preparation protocols. Steel and/or iron industrial wastes can be alternatively employed in generation of IONPs for modification of electrochemical sensors. Additionally, biomass-based activated carbons enriched with surface functional groups are also used in modification of bare IONPs, and subsequently bare electrodes. However, these two areas still need to be fully explored.

Effect of the magnetic core in alginate/gum composite on adsorption of divalent copper, cadmium, and lead ions in the aqueous system

The change of composition of an adsorbent material has been widely used as a method to increase its adsorption capacity, particularly concerning adsorbents made of polysaccharides. Introducing magnetic adsorbents into contaminated water treatment systems is a highly promising strategy, as it promotes the metal ions removal from water. Considering this, gum Arabic (GA) was associated with alginate (Alg), when magnetite nanoparticles were present or absent, to produce beads that were utilised to take up Cu(II), Cd(II), and Pb(II) from aqueous solution. After a complete characterisation (for which Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and swelling were used), the adsorption properties were established using batch and column tests. The magnetic beads (MAlg/GA) demonstrated improved adsorption in comparison with the beads made without magnetite (Alg/GA) under the same conditions. In normal adsorption conditions (pH 6.0, 25 °C, 2.5 g L-1 of adsorbent dosage), the highest uptake capacities recorded for the MAlg/GA beads were: for Cu(II), 1.33 mmol g-1; Cd(II), 1.59 mmol g-1; and for Pb(II), 1.43 mmol g-1. The pseudo-second-order kinetics and Langmuir isotherm models provided good fits for the adsorption of these metals. Overall, ion exchange and physical forces led to the uptake of these metals by both Alg/GA and MAlg/GA; moreover, the functional groups on the beads played crucial roles as binding sites. Additionally, it was observed that flow rates of >2 mL min-1 did not produce noticeable changes in uptake levels over the same flow period. It was found that the efficient eluting agent was HNO3 (0.2 M). In some cases, the metals were not removed fully from the used beads during the first five cycles of regeneration and reuse. The results of this investigation show that these beads are efficient adsorbents for the removal of metal ions from spiked well water samples.

The Development of Alginate/Ag NPs/Caffeic Acid Composite Membranes as Adsorbents for Water Purification

Since the water pollution problem still affects the environmental system and human health, the need to develop innovative membranes has become imperious. Lately, researchers have focused on developing novel materials to help diminish the contamination problem. The aim of present research was to obtain innovative adsorbent composite membranes based on a biodegradable polymer, alginate, to remove toxic pollutants. Of all pollutants, lead was chosen due to its high toxicity. The composite membranes were successfully obtained through a direct casting method. The silver nanoparticles (Ag NPs) and caffeic acid (CA) from the composite membranes were kept at low concentrations, which proved enough to bestow antimicrobial activity to the alginate membrane. The obtained composite membranes were characterised by Fourier transform infrared spectroscopy and microscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TG-DSC). Swelling behaviour, lead ion (Pb²⁺) removal capacity, regeneration and reusability were also determined. Further, the antimicrobial activity was tested against selected pathogenic strains (S. aureus, E. faecalis sp., P. aeruginosa, E. coli and C. albicans). The presence of Ag NPs and CA improves the antimicrobial activity of the newly developed membranes. Overall, the composite membranes are suitable for complex water treatment (removal of heavy metal ions and antimicrobial treatment).

Iron oxide nanoparticles/nanocomposites derived from steel and iron wastes for water treatment: A review

Iron oxide nanoparticles (IONPs) are characterized by superior magnetic properties, high surface area to volume ratio, and active surface functional groups. These properties aid in removal of pollutants from water, through adsorption and/or photocatalysis, justifying the choice of IONPs in water treatment systems. IONPs are usually developed from commercial chemicals of ferric and ferrous salts alongside other reagents, a procedure that is costly, environmentally unfriendly and limits their mass production. On the other hand, steel and iron industries produce both solid and liquid wastes which in most cases are piled, discharged into water streams or landfilled as strategies to dispose them off. Such practices are detrimental to environmental ecosystems. Given the high content of iron present in these wastes, they can be used to generate IONPs. This work reviewed published literature through selected key words on the deployment of steel and/or iron-based wastes as IONPs precursors for water treatment. The findings reveal that steel waste-derived IONPs have properties such as specific surface area, particle sizes, saturation magnetization, and surface functional groups that are comparable or sometimes better than those synthesized from commercial salts. Furthermore, the steel waste-derived IONPs have high removal efficacy for heavy metals and dyes from water with possibilities of being regenerated. The performance of steel waste-derived IONPs can be enhanced by functionalization with different reagents such as chitosan, graphene, and biomass based activated carbons. Nonetheless, there is need to explore the potential of steel waste-based IONPs in removing contaminants of emerging concern, modifying pollutant detection sensors, their techno-economic feasibility in large treatment plants, toxicity of these nanoparticles when ingested into the human body, among other areas.

Preparation of a ternary composite based on water caltrop shell derived biochar and gelatin/alginate for cadmium removal from contaminated water: Performances assessment and mechanism insight

A ternary composite (SA/GE@BC) for cadmium removal from wastewater was successfully prepared. The alginate and gelatin were successfully impregnated with biochar (derived from water caltrop shell) to improve the recyclability and adsorption capacity. The prepared SA/GE@BC demonstrated a good removal for cadmium at pH 4.0-7.0 conditions. The cadmium removal increased with increasing SA/GE@BC dosage. The adsorption kinetics process was well consistent with the pseudo-second order model. And the Langmuir model (R² > 0.99) best described the isotherm data. The calculated adsorption capacity reached a maximum of 86.25 mg/g. The adsorption was a spontaneous and endothermic process, and elevating temperature favored the removal of cadmium. The alginate-gelatin composition enhanced the number of oxygenated functional groups and exchangeable ions. This enhanced the removal of cadmium by complexation and cation ion exchange. Also, the removal mechanism of cadmium on SA/GE@BC involved electrostatic attraction and π-bond coordination. The saturated SA/GE@BC could be well regenerated by 0.1 M HNO₃. All these results suggested the preparation of SA/GE@BC could effectively use waste resources to produce highly effective adsorbents for removing cadmium from contaminated water.

Magnetic chitosan/calcium alginate double-network hydrogel beads: Preparation, adsorption of anionic and cationic surfactants, and reuse in the removal of methylene blue

Robust and reusable magnetic chitosan/calcium alginate double-network hydrogel beads (CSMAB) with an environmentally benign biocomposite material synthesis approach were used adsorption of surfactant and removal of methylene blue dye sequentially for the first time. Double network hydrogel structure with sodium alginate and chitosan and acidification of the surface with HCl provided the reusability of the beads at the pollutant removal in water. The CSMAB beads were characterized for structural analysis by FESEM, EDX, BET, VSM, and FTIR techniques. They were used for the adsorption of cationic hexadecylpyridinium chloride (HDPCl) and anionic sodium dodecyl sulfate (SDS) surfactants and reused in the removal of cationic methylene blue dye without any pretreatment. The effect of pH, adsorbent dose, and temperature on surfactant removal efficiency was analyzed and pH was found the statistical significance. The adsorption capacity of CSMAB beads with a surface area of 0.65 m² g^-1 was calculated as 1.9 mg g^-1 for HDPCl, and 1.2 mg g^-1 for SDS, respectively. The SDS and HDPCl adsorption followed the pseudo-second-order kinetic and Freundlich isotherm model. The thermodynamic results showed that the surfactant adsorption process is an exothermic and spontaneous process. SDS-reacted CSMAB beads showed higher efficiency with 61 % in the removal of methylene blue dye.

Development of novel MOF-mixed matrix three-dimensional membrane capsules for eradicating potentially toxic metals from water and real electroplating wastewater

The stability and applicability of UiO-66-(NH₂)₂ metal-organic framework (MOF) nanoparticles (NPs) were successfully improved in this study by incorporating them into alginate biopolymer during the manifestation of crosslinking agents-calcium chloride and glutaraldehyde-via a simple, environment-friendly, and facile approach to eradicate potentially toxic metals (PTMs) such as Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ from water and real electroplating wastewater. Hydrophilic functional groups (i.e., -OH, -COOH, and -NH₂) are imperative in the smooth loading of UiO-66-(NH₂)₂ MOF- NPs into three-dimensional (3-D) membrane capsules (MCs). The X-ray photoelectron spectroscopy (XPS) results suggested that UiO-66-(NH₂)₂ MOF was effectively bonded in/on the capsule via electrostatic crosslinking between -H₃N⁺ and -COO^-. Scanning electron microscopy results revealed a porous honeycomb configuration of the 3-D SGMMCs (S: sodium alginate, G: glutaraldehyde, M: MOF NPs, and MCs: membrane capsules). The maximum monolayer absorption capacities for Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ were 495, 975, 1295, and 1350 mg/g, respectively. The results of Fourier transform infrared spectroscopy and XPS analyses showed that electrostatic attraction and ion exchange were the main processes for PTM removal used by the as-developed 3-D SGMMCs. The as-developed 3-D SGMMCs exhibited outstanding selectivity for removing the targeted PTMs under the specified pH/conditions and maintained >80% removal efficiency for up to six consecutive treatment cycles. Notably, > 60% removal efficiencies for Cr⁶⁺ and Cu²⁺ were observed when treating real electroplating wastewater. Therefore, the as-developed 3-D SGMMCs can be used as an exceptional multifunctional sorbent to remove and recover PTMs from real electroplating wastewater.

Effective and stable adsorptive removal of Cadmium(II) and Lead(II) using selenium nanoparticles modified by microbial SmtA metallothionein

Metallothionein SmtA-modified selenium nanoparticles (SmtA-SeNPs), efficient adsorbents for Cd(II) and Pb(II), were synthesized in the present work. The ligand, microbial SmtA protein, was synthesized using an engineered strain Escherichia coli, posing the benefits of simplicity, safety, and high production. SmtA-SeNPs were spheres with diameters between 68.1 and 122.4 nm, containing amino, hydroxyl, and sulfhydryl functional groups with negatively charged (pH > 5). SmtA-SeNPs displayed better adsorption performance than dissociative SmtA and SeNPs. The adsorption of Cd(II) and Pb(II) mainly depends on the electrostatic attractions and the metal chelation of abundant functional groups. The maximum adsorption capacity was 506.3 mg/g for Cd(II) and 346.7 mg/g for Pb(II), which were higher than the values of most nanoparticles. In addition, SmtA-SeNPs were immobilized with a membrane filter to produce a SmtA-SeNPs filter, and the percentage removal of Cd(II) and Pb(II) increased from 26.75% to 98.13% for Cd(II) and from 9.95% to 99.20% compared with the blank filter. Moreover, the SmtA-SeNPs filter was regenerated using subacid deionized water, and the filter exhibited a stable removal ratio of Cd(II) and Pb(II) in ten continuous cycles of Cd(II)- or Pb(II)-containing wastewater treatment. The residual amounts of Cd and Pb met national standard levels of wastewater discharge.

Separation of Fe from wastewater and its use for NOx reduction; a sustainable approach for environmental remediation

The nitrogen and sulphur oxide (NO_x and SO₂) emissions are causing a serious threat to the existence of life on earth, requiring their effective removal for a sustainable future. Among various approaches, catalytic or electrochemical reduction of air pollutants (NO_x) has gained much attention due to its high efficiency and the possibility of converting these gases into valuable products. However, the required catalysts are generally synthesized from lab-grade chemicals, which may not be a sustainable approach. Herein, a sustainable approach is presented to synthesize an efficient iron-based catalyst directly from industrial/lake wastewater (WW) for NO_x-reduction. According to the theoretical calculations and experimental results, Fe-ions could be readily recovered from wastewater because it has the best adsorption efficiency among all other co-existing metals (Ni²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Cr⁶⁺). The subsequent experimental investigations confirmed the preferential Fe adsorption from different WW streams to develop Fe₃O₄@EDTA-Fe composite, whereby Fe₃O₄ could be used due to its high recycling ability, and ethylenediaminetetraacetic acid (EDTA) acted as a chelating agent to adsorb Fe-metal from effluents. The Fe₃O₄@EDTA-Fe exhibited high efficiency (≥87%) for NO_x reduction even in the presence of high-degree oxygen contents (10-12%). Moreover, Fe₃O₄-EDTA-Fe showed excellent long-term stability for 24 h and maintained more than 80% NO_x reduction. The fabricated catalyst has a great potential for executing a dual role simultaneously for Fe-recovery and NO_x removal, promoting the circular economy concept and providing a potentially sustainable remediation approach for large-scale applications.

Rapid detection of heterocyclic aromatic amines in cakes by digital imaging colorimetry based on magnetic solid phase extraction with sulfonated hyper-cross-linked polymers

To improve the hydrophobicity and poor separability of hyper-cross-linked polymers (HCPs) in extraction, a porous magnetic adsorbent (Fe₃O₄@SHCP) was constructed by facile post-modification to introduce sulfonic acid groups and magnetic nanoparticles for the magnetic solid-phase extraction of heterocyclic aromatic amines (HAAs). Owing to the double extraction mechanism adopted by Fe₃O₄@SHCP, it has a high extraction efficiency for HAAs. Coupled with high-performance liquid chromatography (HPLC), 5 HAAs in baked cakes were detected at one time. Under optimal extraction conditions, the enrichment factor of HAAs was up to 952-986, with LODs at 0.05-0.3 ng·g^-1. Based on the HPLC method, novel digital imaging colorimetry (DIC) was developed to accurately and rapidly monitor HAAs in cakes. Additionally, the established DIC method has been used to successfully evaluate the effect of baking temperature and duration on HAAs in baked cakes.

Mechanisms of chromium(VI) removal from solution by zeolite and vermiculite modified with iron(II)

Mechanisms of Cr(VI) reduction by Fe(II) modified zeolite (clinoptilolite/mordenite) and vermiculite were evaluated. Adsorbents were treated with Fe(SO4)·7H2O to saturate their exchange sites with Fe(II). However, this treatment decreased their CEC and pHPZC, probably due to the dealumination process. Vermiculite (V-Fe) adsorbed more Fe(II) (21.8 mg g-1) than zeolite (Z-Fe) (15.1 mg g-1). Z-Fe and V-Fe were used to remove Cr(VI) from solution in a batch test to evaluate the effect of contact time and the initial concentration of Cr(VI). The Cr(VI) was 100% reduced to Cr(III) by Z-Fe and V-Fe in solution at 18 mg L-1 Cr(VI) after 1 min. Considering that 3 mol of Fe(II) are required to reduce 1 mol of Cr(VI) (3Fe+2 + Cr+6 → 3Fe+3 + Cr+3), the iron content released from Z-Fe and V-Fe was sufficient to reduce 100% of the Cr(VI) in solutions up to 46.8 mg L-1 Cr(VI) and about 90% (V-Fe) and 95% (Z-Fe) at 95.3 mg L-1 Cr(VI). The Fe(II), Cr(III), Cr(VI), and K+ contents of the adsorbents and solutions after the batch tests indicated that the K+ ions from the [Formula: see text] solution were the main cation adsorbed by Z-Fe, while vermiculite did not absorb any of these cations. The H+ of the acidic solution (pH around 5) may have been adsorbed by V-Fe. The release of Fe(II) from Z-Fe and V-Fe involved cation exchange between K+ and H+ ions from solution, respectively. The reduction of Cr(VI) by Fe(II) resulted in the precipitation of Cr(III) and Fe(III) and a decrease in the pH of the solution to < 5. As acidity limits the precipitation of Cr(III) ions, they remained in solution and were not adsorbed by either adsorbent (since they prefer to adsorb K+ and H+). To avoid oxidation, Cr(III) can be removed by precipitation or the adsorption by untreated minerals.

Adsorption and photocatalysis removal of arsenite, arsenate, and hexavalent chromium in water by the carbonized composite of manganese-crosslinked sodium alginate

The preparation of easily synthesized and cheap composite materials for the efficient removal of toxic oxoanions still remains challenging in sewage treatment. Herein, a new carbonized manganese-crosslinked sodium alginate (Mn/SA-C) was fabricated for the removal of arsenite (As(III)), arsenate (As(V)) and hexavalent chromium (Cr(VI)) in water. The results indicated that the Mn/SA-C pretreated with MnSO₄ solution (Mn/SA-C-S) exhibited a rapid adsorption toward As(III) and As(V) with the removal efficiency of >98% within 10 min, and had a high adsorption capacity toward As(III), As(V), and Cr(VI) with the maximum value of 189.29, 193.29, and 104.50 mg/g based on the Langmuir model, respectively. The removal efficiency of As(III), As(V), and Cr(VI) could be further significantly enhanced by coupling a photocatalytic process. For example, the time in which >98% of Cr(VI) (10 mg/L) was removed dramatically shortened from 360 min (adsorption) to 45 min (adsorption-photocatalysis), and the removal efficiency of As(III) increased by ∼10% within initial 5 min. This was primarily attributed to the Mn-catalyzed production of the photocatalytic excitons for Cr(VI) reduction, and the superoxide (•O₂^-) and hydroxyl (•OH) radicals for As(III) oxidation. The adsorption removal of arsenic (As) was primarily ascribed to surface complexation with MnO and precipitation by MnS₂, and oxidative adsorption because of Mn valence cycle. The removal mechanisms of Cr(VI) mainly contained reduction by MnO and MnS₂, complexation with MnO and carboxyl/hydroxyl groups as well as Cr(OH)₃ precipitation. Our research provides a promising Mn/SA-C-S material for rapid and efficient removal of As(III), As(V), and Cr(VI) in contaminated water through an adsorption-photocatalysis synergistic strategy.

The ion-imprinted oyster shell material for targeted removal of Cd(II) from aqueous solution

In order to realize the sustainable utilization of waste oyster shell and develop a targeted removal technology for cadmium. A novel ion-imprinted oyster shell material (IIOS) was prepared by surface imprinting technique. The prepared samples were characterized by scanning electron microscope, Fourier infrared spectrometer, X-ray diffractometer, thermogravimetric analysis and N₂ adsorption-desorption. The adsorption performances of IIOS for Cd(II) from aqueous solution were studied by the single factor sequential batch, kinetics, isotherms, selectivity and recycling experiments. The characterization researches showed that IIOS was successfully prepared. The adsorption experiments indicated that the adsorption process reached equilibrium within 240 min; the maximum adsorption capacity was up to 69.1 mg g^-1 with the initial Cd(II) concentration of 75 mg L^-1 at pH 5; the adsorption process fitted well to the pseudo-second-order model and the Langmuir isotherm model, which revealed the chemisorption characteristic of Cd(II). Moreover, IIOS exhibited a good targeted adsorption of Cd(II) in several binary competition systems owing to the present of these imprinted cavities. The recycling experiment showed that the targeted removal ratio of IIOS for Cd(II) remained above 80% after used six times. The results of this study indicated that it is a promising prospect for waste oyster shell used as IIOS to dispose heavy metals in wastewater.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Regeneration and reuse of magnetic particles for contaminant degradation in water

Fenton reaction is an oxidation process of interest in wastewater treatment because of its ability to degrade organic compounds. Iron-based magnetic particles can be a very useful catalyst when using heterogeneous Fenton process. The major problem of this heterogeneous process is the saturation of the Fe ³⁺ on the surface, which limits the process. In this study, the possibility of using magnetite particles as a substrate is presented, increasing its degradation efficiency by Fenton reaction through a regeneration process that achieves the electronic reduction of its surface using reducing agents. The results indicate that the regeneration process is quite effective, increasing the efficiency of the degradation of Methylene Blue up to 99%. The concentration of magnetite is the most influential factor in the efficiency of the reaction, while the regeneration time and the concentration of reducing agent do not significantly affect the results considering the range used. The presence of mechanical stirring may adversely affect the reaction in the long term. Increasing the oxidant agent concentration reduces the initial speed of the reaction but not the long-term efficiency. The use of hydrazine in this process allows the successive reuse of these particles maintaining a high percentage of elimination of methylene blue, above 70% even after 10 uses, compared to an elimination below 20% for particles not regenerated after the second use and for particles regenerated with ascorbic acid after the eighth use.

Magnetic water treatment in a wastewater treatment plant: Part II - Processing waters and kinetic study

Magnetic sorption process is applied to real wastewater effluents from a Wastewater Treatment Plant. The complex media sorption is done by using different types of magnetic particles (resin and polymeric covered magnetite) giving good results for removing detergents, phosphates and COD and moderate results for the sorption of nitrogen and several heavy metals. Important kinetic parameters were obtained by data fitting for the pseudo first and second order, and for simplified Elovich models. Regeneration and reuse of the magnetic particles using a chemical-free method was also tested, as well as the effect of the concentration of the particles in the removal efficiency (which proved to be relevant).

Synchronous Construction of Hierarchical Porosity and Thiol Functionalization in COFs for Selective Extraction of Cationic Dyes in Water Samples

Pore size and functionalization are two critical factors for covalent organic frameworks (COFs) as effective adsorbents. However, due to the low crystallinity of COFs, it is a grand challenge to accomplish pore diameter adjustment and functionalization at the same time. In this work, we developed a simple and ingenious strategy, cutting off linkage, to synchronously construct hierarchical porosity and modify thiol groups in COFs under mild conditions. The hybrid COFs containing disulfide bonds were designed and synthesized, and then the disulfide bonds were cleaved by glutathione, resulting in the formation of thiol groups as well as the increase in pore size caused by skeleton defects. The pore diameter of thiol-functionalized hierarchical porous COFs (denoted as HP-TpEDA-SH) was concentrated at 2.6 and 3.5 nm. Thanks to the electrostatic attraction of thiol groups to cationic dyes and the higher number of available adsorption sites, the maximum extraction amounts of methylene blue (MB), malachite green (MG), and crystal violet (CV) by HP-TpEDA-SH were 2.6, 2.1, and 3.3 times those of microporous COFs under optimal extraction conditions, respectively. The proposed analytical method (solid-phase extraction-high-performance liquid chromatography/ultraviolet (SPE-HPLC/UV)) with HP-TpEDA-SH as the adsorbent showed low detection limits of 1.3, 0.13, and 0.12 μg·L^-1 for MB, MG, and CV, respectively. The recoveries of three spiked water samples ranged from 81.5 to 113.8%, with relative standard deviations (RSDs) less than 9.7%. This work not only opened a new avenue for the preparation of functionalized hierarchical porous COFs but also established an effective method for detecting trace cationic dyes in fishery water.

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water

The design of efficient adsorbent with abundant binding sites for heavy metal ions is crucial for developing innovative materials that will remove pollutant metal ions. The high uptake capacity, kinetics, and affinity towards the toxic metals are the key requirements that the materials under invesigation should accomplish. Here we report the synthesis of iminodiacetic acid-functionalized hypercrosslinked polymer (IDA-HCP) for purification of water polluted by toxic metal ions via coordination of carboxylate and amino active sites on the surface of porous polymer. The obtained porous polymer is stable under harsh conditions and the structural features on the polymer work together to help the removal of Pb(II) with 1138 mg g^-1 uptake capacity. In the meanwhile, the IDA-HCP reveals reuseability and very promising capture efficiency not only for Pb²⁺, but also for Hg²⁺ and Cd²⁺ from a mixture of Pb²⁺, Hg²⁺, Cd²⁺, Co²⁺, Fe³⁺, Zn²⁺, Mg²⁺, and Na⁺ metal ions. This result gives us confidence that the polymer material can solve the pollution problem caused by various metal ions.

An environmental-friendly magnetic bio-adsorbent for high-efficiency Pb(Ⅱ) removal: Preparation, characterization and its adsorption performance

In this paper, environmental friendly magnetic composite adsorbent (MSAL), exhibited excellent adsorption capacity for lead ions in the solution, was successfully prepared using two non-biologically toxic materials including L-cysteine and sodium alginate. Batch experiments were carried out to discuss the influences of different parameters like pH, adsorbent dosing, initial concentration and contact time on adsorption performance. Results showed sorption process followed by pseudo-second-order kinetic model and Langmuir isotherm model, which suggested the adsorption was limited by the chemical process dominated by the molecular layer. Based on Langmuir isotherm model, the maximum Pb(Ⅱ) adsorption capacity was about 330 mg/g, which was better than a large amount of other lead adsorbents. Various analytical methods, such as SEM-EDS, FTIR, VSM, TGA, XPS and Zeta potential, were applied to characterize the performance of this adsorbent as well as exploring the adsorption mechanism. Characterization results found this adsorbent exhibited a large contact area, good thermal stability, sufficient adsorption sites and excellent magnetic responsiveness. It also has been found that the adsorption mechanism mainly included ion exchange and chelation between amino, carboxyl and lead ions. After 5 cycles, the adsorption capacity decreased from 98.04% to 87.40% and still maintained at high level. The average iron ions concentration in the adsorbed solution sample or in the regeneration solution were 0.34 mg/L and 0.15 mg/L. Overall, all above results imply that MSAL is a promising reusable adsorbent for removing Pb(Ⅱ) in solution.

Mechanism for degradation of dichlorodiphenyltrichloroethane by mechano-chemical ball milling with Fe-Zn bimetal

As a non-combustion technique for destruction of persistent organic pollutants, mechanochemical ball milling has attracted research attention worldwide due to high effectiveness, simplicity, and wide applicability. Previous studies have demonstrated that Fe-Zn bimetal outperformed other commonly used reagents such as CaO, Fe and Fe₂O₃ in mechanochemical destruction of industrial DDT. Mechanistic studies on mechanochemical destruction of persistent organic pollutants are rather limited and mechanisms may differ among reagents and chemicals. The objective of this study was to shed light on mechanisms for DDT destruction by Fe-Zn bimetal based mechanochemical treatment. A kinetics study showed that data for Fe-Zn treatment can be fitted to the Delogu model whereas that of CaO and Fe₂O₃ treatments followed a pseudo-second-order model. The identification of intermediates and characterization of the solid phase of the ground material revealed that dechlorination, dehydrochlorination, benzene-ring breaking, as well as splicing and condensation of small molecules occurred during the milling process. Cleavage and dehydrogenation eventually converted benzene-ring compounds into graphite and amorphous carbon.

Environmental perspectives of interfacially active and magnetically recoverable composite materials - A review

Aquatic ecosystem contaminated with toxic pollutants and heavy metals due to the rapid growth of industrialization has become a top-priority global concern exhibiting highly adverse effects on human health and the environment. Many treatment techniques have been envisioned for the removal of these toxic contaminants from the aqueous environment. Among these techniques, magnetic separation has attracted burgeoning research attention owing to its simplicity, eco-friendly nature, large surface area, electron mobility, and excellent performance for removing water contaminants. In particular, interfacial active nanoparticles and nanocomposites with unique structures and magnetic properties are considered as ideal provides candidates in material science for next-generation water treatment. This review gives an insight into current research activities associated with the synthesis strategies and applications of interfacially active and magnetically responsive nanomaterials and nanocomposites for sustainable purification processes. In the first half, various synthesis routes for magnetic iron oxide nanoparticles development and the corresponding formation mechanism are summarized. In the second half, we reviewed the magnetic and wettability properties of interfacially active and magnetically responsive nanocomposites and their environmental applications including oil-water separation, removal of hazardous dye-based pollutants and potentially toxic heavy metals. Finally, the review is wrapped up with major concluding remarks and future perspectives of these magnetic nanoscale composite materials for sustainable wastewater remediation.

Electrocatalytic determination of Cd2+ and Pb2+ using an l-cysteine tungstophosphate self-assembled monolayer on a polycrystalline gold electrode

Constructing a sensitive electrochemical sensor based on (Cys)PW for Cd²⁺ and Pb²⁺ detection at the nanomolar level with remarkable selectivity.

Development and application of novel bio-magnetic membrane capsules for the removal of the cationic dye malachite green in wastewater treatment

Novel bio-magnetic membrane capsules (BMMCs) were prepared by a simple two-step titration-gel cross-linking method using a polyvinyl alcohol (PVA) and sodium alginate (SA) matrix to control the disintegration of phytogenic magnetic nanoparticles (PMNPs) in an aqueous environment, and their performance was investigated for adsorbing cationic malachite green (MG) dye from water. The prepared BMMCs were characterized by FTIR, powder XRD, SEM, EDX, XPS, VSM and TGA techniques. The findings revealed that the hysteresis loops had an excellent superparamagnetic nature with saturation magnetization values of 11.02 emu g⁻¹. The prepared BMMCs not only controlled the oxidation of PMNPs but also improved the adsorptive performance with respect to MG dye (500 mg g⁻¹ at 298.15 K and pH 6.5) due to the presence of a large amount of hydrophilic functional groups (hydroxyl/–OH and carboxyl/–COOH) on/in the BMMCs. The smooth encapsulation of PMNPs into the PVA–SA matrix established additional hydrogen bonding among polymer molecular chains, with improved stability, and adsorptive performance was maintained over a wide range of pH values (3–12). Importantly, the prepared BMMCs were easily regenerated just by washing with water, and they could be re-utilized for up to four (4) consecutive treatment cycles without observing any apparent dissolution of iron/Fe⁰ or damage to the morphology. According to the mass balance approach, an estimated amount of 100 mL of treated effluent can be obtained from 160 mL of MG dye solution (25 mg L⁻¹) just by employing a 0.02 g L⁻¹ adsorbent dosage. Finally, a model of BMMCs based on zero-effluent discharge was also proposed for commercial or industrial applications. The prepared BMMCs are greatly needed for improving the water/wastewater treatment process and they can be utilized as an excellent adsorbent to remove cationic pollutants for various environmental applications.

Novel bio-magnetic membrane capsules were prepared by a simple two-step titration-gel cross-linking method using a polyvinyl alcohol and sodium alginate matrix to control the disintegration of phytogenic magnetic nanoparticles in aqueous media.